Zigbee - Building Smart Homes
-
Upload
omer-ali -
Category
Engineering
-
view
117 -
download
5
description
Transcript of Zigbee - Building Smart Homes
Electrical Engineering Department – NFC IET Multan
Building Smart HomesUsing Zigbee
Omer Ali
Structure
IntroductionConceptsArchitectureImplementationEvaluationReference
Electrical Engg Dept ZigBee – Building Smart Homes slide 2 of 56
Electrical Engg Dept ZigBee – Building Smart Homes slide 3 of 56
Introduction
Introduction
What is ZigBee?
• • Specification of protocols for small, low-power radios
History
• May 2003: IEEE 802.15.4 completed• December 2004: ZigBee specification ratified• June 2005: public availability
ZigBee-Alliance
• Companies developing and promoting the standard• 150+ members
Electrical Engg Dept ZigBee – Building Smart Homes slide 4 of 56
ZigBee Alliance - Members
Electrical Engg Dept ZigBee – Building Smart Homes slide 5 of 56
and many more....
Electrical Engg Dept ZigBee – Building Smart Homes slide 6 of 56
Concepts
Why do we need another WPAN standard?
Decreasing
• Power consumption– ZigBee: 10mA <==> BT: 100mA
• Production costs– In the beginning of 2005– ZigBee: 1.1 $ <==> BT: 3 $
• Development costs– Codesize ZB/codesize BT = ½
• Bit-error-rate (BER)
Electrical Engg Dept ZigBee – Building Smart Homes slide 7 of 56
Why do we need another WPAN standard?
Electrical Engg Dept ZigBee – Building Smart Homes slide 8 of 56
picture taken from [9]
Why do we need another WPAN standard?
Increasing
• Sensitivity– ZigBee: -92dbm(0,63pW) <==> BT: -82dbm(6,2pW)
• flexibility– No. of supported nodes– ZigBee: 65536 (in a mesh) <==> BT: 7 (in a star)
• Security– ZigBee: AES (128bit) <==> BT: SAFER (64/128bit)
• Latency requirements– ZigBee: optional guaranteed time slot
• Range– ZigBee: up to 75 m in LOS condition <==> BT: 10 m
Electrical Engg Dept ZigBee – Building Smart Homes slide 9 of 56
Usage Scenarios
• Industrial & commercial
• Consumer electronics
• Toys & games
• PC & periphals
• Personal health care
• home/building automation
Electrical Engg Dept ZigBee – Building Smart Homes slide 10 of 56
Just everything you can imagine for wireless sensor nodes or in general short range communications
ZigBee Frequency Bands
Electrical Engg Dept ZigBee – Building Smart Homes slide 11 of 56
ZigBee Protocol Stack
Electrical Engg Dept ZigBee – Building Smart Homes slide 12 of 56
IEEE 802 Model7 Application User Application <<ZigBee6 Presentation5 Session Application Profile Upper Layers4 Transport3 Network Network2 Data Link Data Link Logic Link Control (LLC) <<802.14.5
Media Access Control (MAC)1 Physical Physical Physical
7Layer ISO-OSI-Model
Simplified 5Layer ISO-OSI-Model
Protocol Stack
Electrical Engg Dept ZigBee – Building Smart Homes slide 13 of 56
picture taken from [10]
ZigBee Profiles
Profiles:
Definition of ZigBee-Profiles• describes a common language for exchanging data• defines the offered services • device interoperatbility across different manufacturers• Standard profiles available from the ZigBee Alliance• profiles contain device descriptions• unique identifier (licensed by the ZigBee Alliance)
Electrical Engg Dept ZigBee – Building Smart Homes slide 14 of 56
Electrical Engg Dept ZigBee – Building Smart Homes slide 15 of 56
Architecture
ZigBee Node-Types
ZigBee Coordinator (ZBC) (IEEE 802.15.4 FFD)
• only one in a network
• initiates network
• stores information about the network
• all devices communicate with the ZBC
• routing functionality
• bridge to other networks
Electrical Engg Dept ZigBee – Building Smart Homes slide 16 of 56
ZigBee Node-Types
ZigBee Router (ZBR) (IEEE 802.15.4 FFD)
• optional component
• routes between nodes
• extends network coverage
• manages local address allocation/de-allocation
Electrical Engg Dept ZigBee – Building Smart Homes slide 17 of 56
ZigBee Node-Types
ZigBee End Device (ZBE) (IEEE 802.15.4 RFD)
• optimized for low power consumption
• cheapest device type
• communicates only with the coordinator
• sensor would be deployed here
Electrical Engg Dept ZigBee – Building Smart Homes slide 18 of 56
Addressing/Discovering ZigBee Nodes
Addressing ZigBee Nodes:
• optimized unique 64 bit address (IEEE 802.15.4)• 16 bit network address (65536 devices)• 256 sub addresses for subunits
Device Discovery
• unicast (NWK id known), broadcast (NWK id unknown)• ZBC-/ZBR-Response: IEEE address + NWK address + all known network addresses
Binding
• creating logical links between 2 or more end devices
Electrical Engg Dept ZigBee – Building Smart Homes slide 19 of 56
Addressing/Binding ZigBee Endpoints
Electrical Engg Dept ZigBee – Building Smart Homes slide 20 of 56
picture taken from [11]
Traffic-Types
1. Data is periodic
• application dictates rate
2. Data is intermittent
• application or stimulus dictates rate (optimun power savings)
3. Data is repetitive (fixed rate a priori)
• device gets guaranteed time slot
Electrical Engg Dept ZigBee – Building Smart Homes slide 21 of 56
Traffic-Modes
1. Beacon mode:
• beacon send periodically
• Coordinator and end device can
go to sleep
• Lowest energy consumption
• Pricise timing needed
• Beacon period (ms-m)
Electrical Engg Dept ZigBee – Building Smart Homes slide 22 of 56
picture taken from [1]
Beacon-Mode
Electrical Engg Dept ZigBee – Building Smart Homes slide 23 of 56
picture taken from [8]
Traffic-Modes
1. Non-Beacon mode:
• coordinator/routers have to stay
awake (robust power supply
needed)
• heterogeneous network
• asymmetric power
Electrical Engg Dept ZigBee – Building Smart Homes slide 24 of 56
picture taken from [1]
Topologies
Mesh-Topology
Electrical Engg Dept ZigBee – Building Smart Homes slide 25 of 56
picture taken from [7]
Topologies
Tree-Topology
Electrical Engg Dept ZigBee – Building Smart Homes slide 26 of 56
picture taken from [7]
Electrical Engg Dept ZigBee – Building Smart Homes slide 27 of 56
Implementation
PHY layer
2400MHz Band specs
• 4 Bits per symbol• DSSS with 32 Bit chips• O-QPSK modulation• Sine halfwave impulses
Electrical Engg Dept ZigBee – Building Smart Homes slide 28 of 56
Bitto
Symbol
QPSKMod.
Symbolto
Chip
Binary Data
Medium
picture taken from [4]
PHY layer
868/915 MHz Band specs
• 1 Bit per symbol• Differential encoding• DSSS with 15 Bit Chips• BPSK modulation• RC impulses (roll-off = 1)
Electrical Engg Dept ZigBee – Building Smart Homes slide 29 of 56
Diff.Encoder
BPSKMod.
Bitto
Chip
Binary Data
Medium
PHY layer
General specs and services
• Error Vector Magnitude (EVM) < 35%• -3dBm minimum transmit power (500µW)• Receiver Energy Detection (ED)• Link Quality Indication (LQI)• Use ED & LQI to reduce TX-power• Clear Channel Assessment (CCA) with 3 modes
1.Energy above threshold2.Carrier sense only3.Carrier sense with energy above threshold
Electrical Engg Dept ZigBee – Building Smart Homes slide 30 of 56
PHY layer
PHY Protocol Data Unit (PPDU) frame structure
• Frame to be sent via radio• Preamble for chip and symbol synchronization• Contains either data or data acknowlegement• Packet size 8-127 Octets• Contains MAC Protocol Data Unit (MPDU)
Electrical Engg Dept ZigBee – Building Smart Homes slide 31 of 56
table taken from [1]
MAC layer
Channel access specification
• Beacon/Nonbeacon• Define Superframe structure• Slotted/unslotted CSMA-CA
Electrical Engg Dept ZigBee – Building Smart Homes slide 32 of 56
MAC layer
Managing PANs
• Channel scanning (ED, active, passive, orphan)• PAN ID conflict detection and resolution• Starting a PAN• Sending beacons• Device discovery• Device association/disassociation• Synchronization (beacon/nonbeacon)• Orphaned device realignment
Electrical Engg Dept ZigBee – Building Smart Homes slide 33 of 56
MAC layer
Transfer handling
• Transaction based (indirect transmission)– Beacon indication– Polling
• Transmission, Reception, Rejection, Retransmission– Acknowleded– Not acknowledged
• GTS management– Allocation/deallocation– Usage– Reallocation
• Promiscous mode
Electrical Engg Dept ZigBee – Building Smart Homes slide 34 of 56
MAC layer
Frame security
• Provided security features– Access control– Data encryption– Frame integrity– Sequential freshness
• Avaiable security modes– Unsecured mode– ACL mode– Secured mode
• Avaiable security suites– AES-CTR– AES-CCM– AES-CBC-MAC
Electrical Engg Dept ZigBee – Building Smart Homes slide 35 of 56
MAC layer
How far have we come?
Electrical Engg Dept ZigBee – Building Smart Homes slide 36 of 56
0
1
2
4
3
5
6
7
Problem: How do 6 and 7 talk to coordinator 0?Solution: Routing (NWK Layer)
NWK layer
Distributed address assignment
• Tree structure or self managed by higher layer• 16Bit network space divided among child routers• Child routers divide there space again for their children• Depends on:
– Maximum child count per parent– Maximum child-routers per parent– Maximum network depth
Electrical Engg Dept ZigBee – Building Smart Homes slide 37 of 56
NWK layer
Distributed address assignment - Example
• Cm=2 ; Rm=2 ; Lm=2
Electrical Engg Dept ZigBee – Building Smart Homes slide 38 of 56
Depth in network d Offset Value0 31 12 0
0
1
4
5
6
?2
NWK layer
Routing cost
• Metric to compare „goodness“ of routes• Base: Link cost between 2 neighbors• Path cost = sum of link costs along the path• Link cost determination:
– Link quality indication from PHY– Statistical measures
Electrical Engg Dept ZigBee – Building Smart Homes slide 39 of 56
NWK layer
Route discovery
• Find or update route between specific source and destination• Started if no active route present in routing table• Broadcast routing request (RREQ) packets• Generates routing table entries for hops to source• Endpoint router responds with Routing response (RREP) packet• Routes generated for hops to destination• Routing table entry generated in source device
Electrical Engg Dept ZigBee – Building Smart Homes slide 40 of 56
NWK layer
Route discovery
Electrical Engg Dept ZigBee – Building Smart Homes slide 41 of 56
RREQRREP
1 2 3
4
2
1
5
NWK layer
Routing
• Check if routing table entry exists• Initiate route discovery if possible• Hierarchical routing as fallback
Electrical Engg Dept ZigBee – Building Smart Homes slide 42 of 56
Route maintenance
• Track failed deliveries to neighbors• Initiate route repair when threshold reached• Careful with network load!• In case of total connectivity loss:
– Orphaning procedure– Re-association with network
Application Level
Electrical Engg Dept ZigBee – Building Smart Homes slide 43 of 56
picture taken from [11]
Application Level
Electrical Engg Dept ZigBee – Building Smart Homes slide 44 of 56
picture taken from [11]
Application Layer
Application Support Sub-layer (APS):
• interface to NWK-layer (offers general set of functions)• Data transmission, binding and security management
Electrical Engg Dept ZigBee – Building Smart Homes slide 45 of 56
picture taken from [1]
Application Level
Electrical Engg Dept ZigBee – Building Smart Homes slide 46 of 56
picture taken from [11]
Application Layer
Application Framework:
• Specifies Datatypes• Devices describe themselves by ZigBee descriptor:
– frequency band– power description– application flags– application version– serial number– manufacturer– ...
Electrical Engg Dept ZigBee – Building Smart Homes slide 47 of 56
Application Layer
Supported Data-types
Electrical Engg Dept ZigBee – Building Smart Homes slide 48 of 56
table taken from [1]
Application Level
Electrical Engg Dept ZigBee – Building Smart Homes slide 49 of 56
picture taken from [11]
Application Layer
ZigBee defined Objects (ZDO):
• provides common function for applications• Initializes APS, NWK-Layer and Security Service Specification• offers services like device-/service-descovery, binding and security management• assembles information about the network• for ZBC/ZBR -> e.g. binding table
Electrical Engg Dept ZigBee – Building Smart Homes slide 50 of 56
picture taken from [1]
Electrical Engg Dept ZigBee – Building Smart Homes slide 51 of 56
Evaluation
Pros and Cons
Pros
• good extension of existing standards
• supported by many companies• low power consumption• low cost• easy implemented (Designer
concentrates on end application) • flexible network structure
Electrical Engg Dept ZigBee – Building Smart Homes slide 52 of 56
Cons
• Not many end devices available yet
• Single point of failure (centralized architecture)
Gadget example
Pantech & Curitel P1 phone
• Only a prototype
• control electrical appliances
• Check temperature & humidity
• Sending messages in case of trespass
Electrical Engg Dept ZigBee – Building Smart Homes slide 53 of 56
picture taken from [9]
Electrical Engg Dept ZigBee – Building Smart Homes slide 54 of 56
References
References
Electrical Engg Dept ZigBee – Building Smart Homes slide 55 of 56
[1] ZigBee Specifications v1.0
[2] “Designing with 802.15.4 and ZigBee”, Presentation Slides, available on ZigBee.org
[3] “ZigBee Tutorial”, http://www.tutorial-reports.com/wireless/zigbee
[4] IEEE 802.15.4 Specification
[5] “Network Layer Overview”, Presentation Slides, Ian Marsden, Embedded Systems Show, Birmingham, October 12th, 2006, 064513r00ZB_MG_Network_Layer_Overview.pdf, available on ZigBee.org
[6] “Designing a ZigBee Network”, Presentation Slides, David Egan, Ember Corporation, ESS 2006, Birmingham, 064516r00ZG_MG_Network_Design.pdf, available on ZigBee.org
[7] “ZigBee Architecture Overview”, Presentation Slides, Oslo, Norway June 2005, ZigBee_Architecture_and_Specifications_Overview.pdf, available on ZigBee.org
[8] “Low Power Consumption Features of the IEEE 802.15.4/ZigBee LR-WPAN Standard”, http://www.cens.ucla.edu/sensys03/sensys03-callaway.pdf
[9] “ZigBee Home Automation Mobile from Pantech”, http://www.i4u.com/article2561.html
[10] “Basic Lecture - ZigBee” http://www.korwin.net/eng/infor/info_zb_01.asp
[11] “Introduction to the ZigBee Application Framework”, Presentation Slides, ZigBee Open House, San Jose, June 15th, 2006, 053340r06ZB_AFG-Overview-ZigBee-Open-House.pdf, available on ZigBee.org
Electrical Engg Dept ZigBee – Building Smart Homes slide 56 of 56
Thank you