Zenith p60w38 p60w38h Chassis Rf-03la Sm
-
Upload
graeme-webb -
Category
Documents
-
view
215 -
download
0
Transcript of Zenith p60w38 p60w38h Chassis Rf-03la Sm
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
1/102
SERVICE MANUAL
Product Type: PLASMA
Chassis: RF-03LA
Manual Series:Manual Part #:
Model Line:
Product Year: 2003
P60W38
P60W38H
Model Series:
CONTENTS
Description of Controls ........................... ......................4
Adjustment Instructions...............................................16
Printed Circuit Boards.................................................19
Diagrams ......................... ........................... ...............29
Parts List ......................... ........................... ...............31
Schematics....................................................................
Published Oct. 2003
by Technical Publications
Zenith Electronics Corporation
201 James Record Road
Huntsville, Alabama 35824-1513
Copyright 2003 by Zenith Electronics Corporation
Printed in Korea
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
2/102
- 2 -
IMPORTANT SAFETY NOTICEThis manual was prepared for use only by properly trained audio-visual service
technicians.
When servicing this product, under no circumstances should the original design
be modified or altered without permission from Zenith Electronics Corporation.
All components should be replaced only with types identical to those in the
original circuit and their physical location, wiring and lead dress must conform
to original layout upon completion of repairs.
CAUTION: Do not attempt to modify this product in any way.
Never perform customized installations without manufacturers
approval.
Unauthorized modifications will not only void the warranty, but may
lead to property damage or user injury.
Service work should be performed only after you are thoroughly familiar with
these safety checks and servicing guidelines.
GRAPHIC SYMBOLSThe exclamation point within an equilateral triangle is intended to
alert the service personnel to important safety information in the
service literature.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the service personnel to the presence
of noninsulated dangerous voltage that may be of sufficient
magnitude to constitute a risk of electric shock.
The pictorial representation of a fuse and its rating within an
equilateral triangle is intended to convey to the service personnel
the following fuse replacement caution notice:
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK
OF FIRE, REPLACE ALL FUSES WITH THE SAME TYPE ANDRATING AS MARKED NEAR EACH FUSE.
SERVICE INFORMATIONWhile servicing, use an isolation transformer for protection from AC line shock.
After the original service problem has been corrected, make a check of the
following:
FIRE AND SHOCK HAZARD1. Be sure that all components are positioned to avoid a possibility of adjacent
component shorts. This is especially important on items transported to and
from the repair shop.
2. Verify that all protective devices such as insulators, barriers, covers, shields,
strain reliefs, power supply cords, and other hardware have been reinstalled
per the original design. Be sure that the safety purpose of the polarized line
plug has not been defeated.
3. Soldering must be inspected to discover possible cold solder joints, solder
splashes, or sharp solder points. Be certain to remove all loose foreign particles.
4. Check for physical evidence of damage or deterioration to parts and
components, for frayed leads or damaged insulation (including the AC cord),
and replace if necessary.
5. No lead or component should touch a receiving tube or a resistor rated at 1
watt or more. Lead tension around protruding metal surfaces must be avoided.
6. After reassembly of the set, always perform an AC leakage test on all
exposed metallic parts of the cabinet (the channel selector knobs, antenna
terminals, handle and screws) to be sure that set is safe to operate without
danger of electrical shock. DO NOT USE A LINE ISOLATION
TRANSFORMER DURING THIS TEST. Use an AC voltmeter having 5000
ohms per volt or more sensitivity in the following manner: Connect a 1500
ohm, 10 watt resistor, paralleled by a .15 mfd 150V AC type capacitor
between a known good earth ground water pipe, conduit, etc.) and the
exposed metallic parts, one at a time.
Measure the AC voltage across the combination of 1500 ohm resistor and
.15 mfd capacitor. Reverse the AC plug by using a non-polarized adaptor
and repeat AC voltage measurements for each exposed metallic part.
Voltage measured must not exceed 0.75 volts RMS. This corresponds to 0.5
milliamp AC. Any value exceeding this limit constitutes a potential shock
hazard and must be corrected immediately.
TIPS ON PROPER INSTALLATION1. Never install any receiver in a closed-in recess, cubbyhole, or closely fitting
shelf space over, or close to, a heat duct, or in the path of heated air flow.
2. Avoid conditions of high humidity such as: outdoor patio installations where
dew is a factor, near steam radiators where steam leakage is a factor, etc.
3. Avoid placement where draperies may obstruct venting. The customer
should also avoid the use of decorative scarves or other coverings that might
obstruct ventilation.
4. Wall- and shelf-mounted installations using a commercial mounting kit must
follow the factory-approved mounting instructions. A product mounted to a
shelf or platform must retain its original feet (or the equivalent thickness in
spacers) to provide adequate air flow across the bottom. Bolts or screws
used for fasteners must not touch any parts or wiring. Perform leakage tests
on customized installations.
5. Caution customers against mounting a product on a sloping shelf or in a tilted
position, unless the receiver is properly secured.6. A product on a roll-about cart should be stable in its mounting to the cart.
Caution the customer on the hazards of trying to roll a cart with small casters
across thresholds or deep pile carpets.
7. Caution customers against using a cart or stand that has not been listed by
Underwriters Laboratories, Inc. for use with its specific model of television
receiver or generically approved for use with TVs of the same or larger screen
size.
8. Caution customers against using extension cords. Explain that a forest of
extensions, sprouting from a single outlet, can lead to disastrous
consequences to home and family.
A V
PRODUCT SAFETY GUIDELINES
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
3/102
- 3 -
DESCRIPTION OF CONTROLS...........................................4
SPECIFICATIONS.................................................................6
EXTERNAL CONTROL DEVICE SETUP..............................8
IR CODE..............................................................................14
ADJUSTMENT INSTRUCTION...........................................16
PRINTED CIRCUIT BOARD ...............................................19
BLOCK DIAGRAM...............................................................29
EXPLODED VIEW...............................................................30
EXPLODED VIEW PARTS LIST .........................................31
REPLACEMENT PARTS LIST............................................32
SCHEMATIC DIAGRAM..........................................................
TABLE OF CONTENTS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
4/102
- 4 -
ControlsControls
Connection OptionsConnection Options
RS-232C INPUT(CONTROL/SERVICE)
VIDEOINPUT
Y PB PR (MONO)R AUDIO LR AUDIO L
S-VIDEO AC INPUTAUDIO INPUTAUDIO INPUTAUDIO INPUT
R ( )( )( )( ) L
EXTERNAL SPEAKER COMPONENT INPUTDVI INPUT RGB INPUT RGB OUTPUT REMOTECONTROL
5
1. RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
2. DVI (Digital Visual Interface) INPUT/
RGB INPUT/AUDIO INPUT JACKS
Connect the monitor output connector from a PC to theappropriate input port.
3. RGB OUTPUT PORTYou can watch the RGB signal on another monitor, connect
RGB OUTPUT to another monitors PC input port.
4. REMOTE CONTROL
Connect your wired remote control to the remote control
port on the Monitor.
5. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to Speaker & Speaker
Stand manual.
6. COMPONENT INPUT/AUDIO INPUT JACKS
Connect a component video/audio device to these jacks.
7. S-VIDEO INPUTS
Connect S-Video out from an S-VIDEO VCR or other S-
Video device to the S-VIDEO input.AUDIO/VIDEO INPUT JACKSConnect audio/video out from external equipment to these
jacks.
8. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
Back Connection PanelBack Connection Panel
VOLUMEINPUT
SELECTON/OFF
Main Power ButtonINPUT SELECT Button
VOLUME (F,G) Buttons
Remote Control Sensor
Power Standby IndicatorIlluminates red in standby
mode. Illuminates green whenthe Monitor is turned on.
Sub Power Button
Front Panel ControlsFront Panel Controls
1 3 42 7 86
- This is a simplified representation of a typical front panel.The Front Panel Controls shown here may be somewhat different from your monitor.
DESCRIPTION OF CONTROLS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
5/102
- 5 -
- When using the remote control, aim it at the remote control sensor on the monitor.
- Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press
the key again as necessary.
1 2 3
4 5 6
7 8
0
9
POWER
SLEEP INPUT SELECT
APC DASP
ARC PIP ARC
PIP TWIN PICTURE
SWAP
MENU MUTE
OKVOL
POWER STOP
PLAY FF
REC
REW
P/STILL
WIN.SIZE WIN.POSITION
ZOOM +ZOOM -
SPLIT ZOOM
VOL
SUB INPUT
POWER
Switches the Monitor between
ON and STANDBY.
SLEEP
Sets the Sleep Timer.
APCAdjusts the factory preset picture
according to the room.
ARC
Changes the picture format.
PIP
Switches the sub picture on or off.
SWAP
Exchanges main and sub picture
images.
MENUDisplays on screen menus one by one.
Exits the current menu.
NUMBER buttons
WIN. SIZE
Adjusts the sub picture size.
WIN.POSITION
Moves the sub picture.
SPLIT ZOOMEnlarges the picture.
ZOOM-/ZOOM+
Enlarges or reduces
the main picture size.
VCR BUTTONS
Control some video cassette
recorders.
OK
D / ESelects menu option.
Memorizes menu changes.
F / G (Volume button)
Increases/decreases sound level.
Adjusts menu settings.
INPUT SELECT
Selects source: Video, S-Video, RGB,
DVI, or Component mode.
DASP
To select the sound appropriate toyour viewing program character:
Flat, Music, Cinema, Sports, or User
PIP ARC
Changes the PIP picture format.
SUB INPUT
Selects the input source for the sub
picture.
MUTE
Switches the sound on or off.
TWIN PICTURE
Remote Control Key FunctionsRemote Control Key Functions
DESCRIPTION OF CONTROLS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
6/102
- 6 -
Resolution
640x350
720x400
640x480
800x600
848x480
HorizontalFrequency(KHz)
31.468
37.861
31.469
37.927
31.469
35.000
37.861
37.500
43.269
35.156
37.879
46.875
53.674
49.725
31.500
35.000
37.500
70.09
85.08
70.08
85.03
59.94
66.66
72.80
75.00
85.00
56.25
60.31
75.00
85.06
74.55
60.00
70.00
75.00
31.500
35.000
37.500
48.363
56.476
60.023
54.348
63.995
67.500
60.000
63.981
47.700
59.625
47.700
59.625
60.00
70.00
75.00
60.00
70.06
75.02
60.05
70.01
75.00
60.00
60.02
60.00
75.02
60.00
75.02
VerticalFrequency(Hz)
Resolution
832x624
1024x768
852x480
1152x864
1280x960
1280x1024
1360x768
1366x768
HorizontalFrequency(KHz)
VerticalFrequency(Hz)
Monitor Display Specifications (RGB-PC / DVI-PC Mode)
SPECIFICATIONS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
7/102
- 7 -
Product SpecificationsProduct Specifications
MODELS
Width (inches / mm)
Height (inches / mm)
Depth (inches / mm)
Weight (pounds / kg)
Power requirement
Resolution
Color
Operating Temperature Range
Operating Humidity Range
Maximum Elevation
P60W38, P60W38H
57.3 / 1455
84.3 / 883
3.9 / 99
144 / 65.3
AC120V, 60Hz
1366 x 768 (Dot)
16,770,000 (256 steps of each R, G and B)
32 ~ 104F (0 ~ 40C)
Less than 80%
6561 feet (2000m)
SPECIFICATIONS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
8/102
- 8 -
No. Pin Name
1 No Connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
1
5
6
9
2354678
RXDTXDGNDDTRDSRRTSCTS
TXDRXDGNDDSRDTRCTSRTS
PC
7-Wire Configuration(Standard RS-232C cable)
D-Sub 9
3256487
PDP
D-Sub 9
2354678
RXDTXDGNDDTRDSRRTSCTS
TXDRXDGNDDTRDSRRTSCTS
PC
3- Wire Configuration(Non standard)
D-Sub 9
3254678
PDP
D-Sub 9
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)and control the Monitors functions externally.- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.- RS-232C connection cables are not supplied with the Monitor.
TType of Connector: D-Sub 9-pin Maleype of Connector: D-Sub 9-pin Male
RS-232C ConfigurationsRS-232C Configurations
RS-232C INPUT(CONTROL/SERVICE)
VIDEOINPUT
Y PB PR (MONO)R AUDIO LR AUDIO L
S-VIDEO AC INPUTAUDIOINPUTAUDIO INPUTAUDIOINPUT
R ( )( )( )( ) L
EXTERNALSPEAKER COMPONENT INPUTDVI INPUT RGB INPUT RGB OUTPUT REMOTECONTROL
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
9/102
- 9 -
Transmission
* [Command 1]: k, j
* [Command 2]: To control PDP set.
* [Set ID]: You can adjust the set ID to choose desired moni-tor ID number in Special menu. Adjustment rangeis 1 ~ 99. When selecting Set ID 0, every con-nected PDP set is controlled. Set ID is indicated
as decimal (1~99) on menu and as Hexa decimal(0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data.Transmit FF data to read status of command.
* [Cr]: Carriage ReturnASCII code 0x0D
* [ ]: ASCII code space (0x20)
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The Monitor transmits ACK (acknowledgement) based onthis format when receiving normal data. At this time, if thedata is data read mode, it indicates present status data. Ifthe data is data write mode, it returns the data of the PC
computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Monitor transmits ACK (acknowledgement) based onthis format when receiving abnormal data fromnon-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][x]
TTransmission / Receiving Protocolransmission / Receiving Protocol
01. Power k a 0 ~ 1
02. Input Select k b 0 ~ 4
03. Aspect Ratio k c 0 ~ 3
04. Screen Mute k d 0 ~ 1
05. Volume Mute k e 0 ~ 1
06. Volume Control k f 0 ~ 64
07. Contrast k g 0 ~ 6408. Brightness k h 0 ~ 64
09. Color k i 0 ~ 64
10. Tint k j 0 ~ 64
11. Sharpness k k 0 ~ 64
12. OSD Select k l 0 ~ 1
13. Remote Control Lock Mode k m 0 ~ 1
14. PIP/Twin k n 0 ~ 3
15. PIP Aspect Ratio k o 0 ~ 1
16. Split Zoom k p 21 ~99
17. PIP Position k q 0 ~ 3
18. Treble k r 0 ~ 64
19. Bass k s 0 ~ 64
20. Balance k t 0 ~ 64
21. Color Temperature k u 0 ~ 3
22. Red Adjustment k v 0 ~ C823. Green Adjustment k w 0 ~ C8
24. Blue Adjustment k $ 0 ~ C8
25. PIP Input Source k y 0 ~ 4
26. Abnormal State k z 0 ~ a
27. ISM Method j p 0 ~ 3
28. Low Power j q 0 ~ 1
29. Orbiter Time Setting j r 1 ~ FE
30. Orbiter Pixel Setting j s 0 ~9
31. Picture Size Setting j t 0 ~64
for Twin Picture mode
32. Auto Configure j u 1
COMMAND 1 COMMAND 2 DATA(Hexadecimal)
Menu doesnt display on screen when setting the 4,12, 13, and 26 ~ 32.
Command Reference ListCommand Reference List
Set IDSet ID
- Use this function to specify a monitor ID number.- Refer to Real Data Mapping 1. See page 27.
1. Press the MENU button and then use the D /E button to select the SPECIAL menu.
2. Press theG button and then use D /E button to select Set ID..
3. Press theG button and then use F /G button to adjust Set ID. to choose the desired
monitor ID number.
The adjustment range of Set ID. is 1 ~ 99.
1
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
language
Key lock
ISM Method
Low power
Set ID. G
OSD Rotate
MENU Prev.
Baud rate : 115200 bps (UART) Data length : 8 bits
Parity : None
Stop bit : 1 bit Communication code : ASCII code
Communication ParametersCommunication Parameters
Data 1: Illegal Code2: Not supported function3: Wait more time
ComponentVideo
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
10/102
- 10 -
02. Input Select (Command:b) (Main Picture Input)
G To select input source for the Monitor.You can also select an input source using the INPUTSELECT button on the Monitor's remote control.
Transmission
Data 0 : RGB1 : Component2 : Video
3 : S-video4 : DVI
[k][b][ ][Set ID][ ][Data][Cr]
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
01. Power (Command:a)
G To control Power On/Off of the Monitor.
Transmission
Data 0 : Power Off 1 : Power On
[k][a][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Transmission
[k][a][ ] [Set ID][ ][FF][Cr]
Acknowledgement
Data 0 : Power Off 1 : Power On
* In a like manner, if other functions transmit FF databased on this format, Acknowledgement data feedbackpresents status about each function.
[a][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command:c) (Main Picture Format)
G To adjust the screen format.You can also adjust the screen format using the ARC(Aspect Ratio Control) button on remote control or in theSpecial menu.
Transmission
Data 0 : Wide screen (16:9)1 : Normal screen (4:3)2 : Full screen (Zoom)3 : Horizon
[k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement
* You select either 16:9 or 4:3 screen aspect ratio using thePC, DTV 720p/1080i.
[c][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command:e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button onremote control.
Transmission
Data 0 : Volume mute on (Volume off)1 : Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
04. Screen Mute (Command:d)
G To select screen mute on/off.
Transmission
Data 0 : Screen mute off (Picture on)1 : Screen mute on (Picture off)
[k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command:f)
G To adjust volume.You can also adjust sound level with the volume but-tons on remote control.
Transmission
Data Min : 0 ~ Max : 64
Refer to Real Data Mapping1 as shown below.
[k][f][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command:g)
G To adjust screen contrast.You can also adjust contrast in the Video menu.
Transmission
Data Min : 0 ~ Max : 64
Refer to Real Data Mapping1 as shown below.
[k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real Data Mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
11/102
- 11 -
13. Remote Control Lock Mode (Command2:m)
G To lock the remote control and front panel controls on themonitor
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Lock off 1: Lock on
If youre not using the remote control and front panel con-trols on the monitor, use this mode. When main power isturned on/off, remote control lock is released.
[m][ ][Set ID][ ][OK][Data][x]
14. PIP / Twin (Command2:n)G To control the PIP (Picture-in-Picture) or Twin Picture.
You can also control the PIP/TWIN using the PIP or Twin PIC-TURE button on the remote control or in the Special menu.
Transmission
Data 0: PIP/DW off1: PIP
2: DW13: DW2
[k][n][ ][Set ID][ ][Data][Cr]
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
G To adjust the screen sharpness.You can also adjust sharpness in the Video menu.
Transmission
11. Sharpness (Command2:k)
Data Min: 0 ~ Max: 64
Refer to Real Data Mapping 1. See page 27.
[k][k][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: OSD off 1: OSD on
[l][ ][Set ID][ ][OK][Data][x]
15. PIP Aspect Ratio (Command2:o)
G To select the PIP picture format.You can also select the PIP picture format using PIP ARC
on the remote control.Transmission
[k][o][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: 4:3 1: 16:9
[o][ ][Set ID][ ][OK][Data][x]
09. Color (Command2:i)
G To adjust the screen color.You can also adjust color in the Video menu.
Transmission
Data Min : 0 ~ Max : 64
Refer to Real Data Mapping 1. See page 27.
[k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j)
G To adjust the screen tint.You can also adjust tint in the Video menu.
Transmission
Data Red : 0 ~ Green : 64
Refer to Real Data Mapping 1. See page 27.
[k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h)
G To adjust screen brightness.You can also adjust brightness in the Video menu.
Transmission
Data Min : 0 ~ Max : 64
Refer to Real Data Mapping 1. See page 27.
[k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
16. Split Zoom (Command2:p)
G To operate split zoom function and select the splitzoom section number.
Transmission
Data Min: 0 ~ Max: 99
Refer to Real Data Mapping 2 below.
[k][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
* Real Data Mapping 2
0 : Reset split zoom
21: Selection 1 of 2 split zoom
24: Selection 4 of 2 split zoom
41: Selection 1 of 4 split zoom
42: Selection 2 of 4 split zoom
44: Selection 4 of 4 split zoom
45: Selection 5 of 4 split zoom
91: Selection 1 of 9 split zoom
99: Selection 9 of 9 split zoom
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
12/102
- 12 -
21. Color Temperature (Command2:u)
G To adjust color temperature.You can also adjust ACC in the Video menu.
Transmission
Data 0: Normal 1: Cool 2: Warm 3: User
[k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
18. Treble (Command2:r)
G To adjust treble.You can also adjust treble in the Audio menu.
Transmission
Data Min: 0 ~ Max: 64
Refer to Real Data Mapping 1. See page 27.
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
17. PIP Position (Command2:q)
G To select sub picture position for PIP.You can also adjust the sub picture position usingWin.position on the remote control or in the Special menu.
Transmission
Data 0: Right down on screen1: Left down on screen2: Left up on screen3: Right up on screen
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
19. Bass (Command2:s)G To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
Data Min: 0 ~ Max: 64
Refer to Real Data Mapping 1. See page 27.
[k][s][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
20. Balance (Command2:t)
G To adjust balance.You can also adjust balance in the Audio menu.
Transmission
Data Min: 0 ~ Max: 64
Refer to Real Data Mapping 1. See page 27.
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
* Real Data Mapping 3
0 : -20
5 : -19
A : -18
5F: -1
64: 0
69: +1
C3: +19
C8: +20
22. Red Adjustment (Command2:v)
G To adjust red in color temperature.
Transmission
Data Min: 0 ~ Max: C8
Refer to Real Data Mapping 3 as shown below.
[k][v][ ][Set ID][ ][Data][Cr]
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
23. Green Adjustment (Command2:w)
G To adjust green in color temperature.
Transmission
Data Min: 0 ~ Max: C8
Refer to Real Data Mapping 3 as shown below.
[k][w][ ][Set ID][ ][Data][Cr]
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
24. Blue Adjustment (Command2:$)
G To adjust blue in color temperature.
Transmission
Data Min: 0 ~ Max: C8
Refer to Real data mapping 3 as shown below.
[k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement[$][ ][Set ID][ ][OK][Data][x]
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
13/102
- 13 -
27. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
Data 0: Normal1: White wash
2: Orbiter3: Inversion
[j][p][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
28. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
Data 0: Low power off1: Low power on
[j][q][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
29. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
Transmission
Data Min: 1 ~ Max: FE
[j][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
30. Orbiter Pixel Setting (Command2:s)G To adjust pixel number in orbiter function.
Transmission
Data Min: 0 ~ Max: 9
[j][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
32. Auto Configure (Command2:u)
G To adjust picture position and minimize image shakingautomatically. Auto Configure only works in RGB-PCmode.
Transmission
Data 1: To set
[j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
31. Picture Size Setting for Twin Picture mode(Command2:t)
G To adjust main picture size in twin picture mode.
Transmission
Data Min: 0 ~ Max: 64
Refer to Real Data Mapping1. See page 27.
[j][t][ ] [Set ID][ ][Data][Cr]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
25. PIP Input Select (Command2:y)
G To select input source for sub picture in PIP mode.
Transmission
Data 0: RGB 1: Component2: Video 3: S-video 4: DVI
[k][y][ ][Set ID][ ][Data][Cr]
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
26. Abnormal State (Command2:z)
G To recognize an abnormal state.
Transmission
Data 0: Normal (Power on and signal exist)1: No signal (Power on).2: Turn the monitor off with remote control.3: Turn the monitor off with Sleep Time function.4: Turn the monitor off with RS-232C function.5: 5V down.6: AC down.
7: Turn the monitor off with Fan Alarm function.8: Turn the monitor off with Off Time function.9: Turn the monitor off with Auto Off function.a: Turn the monitor off with AV board detect.
[k][z][ ][Set ID][ ][FF][Cr]
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data FF:Read
EXTERNAL CONTROL DEVICE SETUP
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
14/102
- 14 -
IR CODE
G Connect your wired remote control to the Remote Control port on the Monitor.
G Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
G Configuration of frame
G Repeat code
G Lead code
1st frame
Lowcustom code
Leadcode
Highcustom code
Data code Data code
TC
Tf
T1
C0
Carrier frequency
FCAR = 1/TC = fOSC/12Duty ratio = T1/TC = 1/3
Repeat frame
C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat code
9 ms 4.5 ms
0.55 ms
9 ms
2.25 ms
G Bit description
G Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
Bit 0
Tf Tf
Tf=108ms @455KHz
0.56 ms 0.56 ms
1.12 ms
Bit 1
2.24 ms
How to ConnectHow to Connect
Remote Control IR CodeRemote Control IR Code
IR Code InformationIR Code Information
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
15/102
- 15 -
IR CODE
UP (D)
DOWN (E)VOL+ (G)
VOL- (F)POWER On/OffPOWER ONPOWER OFFMUTENumber Key 0Number Key 1Number Key 2Number Key 3Number Key 4Number Key 5
Number Key 6Number Key 7Number Key 8Number Key 9AII INPUT SELECTRGBDVIVIDEOS-VIDEOCOMPONENTSLEEP
OK ()MENUDASPAPCPIPPIP INPUTSWAPPIP ARCTWIN PICTUREZOOM +ZOOM -Window SizeWindow PositionSplit ZoomARCARC (4:3)ARC (16:9)ARC (ZOOM)Auto configure
00H01H02H03H08HC4HC5H09H10H11H12H13H14H15H
16H17H18H19H0BHD5HC6H5AHD8HBFH0EH44H43H52H4DH
60H61H63H64H6BH40H41H69H6AH7BH79H76H77HAFH99H
R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button (Power On/Off)Discrete IR Code (Only Power On)Discrete IR Code (Only Power Off)R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button
R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button (RGB/DVI/V-deo/S-video/Component)Discrete IR Code (Input RGB Selection)Discrete IR Code (Input DVI Selection)Discrete IR Code (Input Video Selection)Discrete IR Code (Input S-video Selection)Discrete IR Code (Input Component Selection)R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button
R/C ButtonR/C ButtonR/C Button (PIP/TWIN Exchange)R/C Button (4:3/16:9)R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button(4:3/16:9/Zoom Mode Selection)Discrete IR Code (Only 4:3 mode)Discrete IR Code (Only 16:9 mode)Discrete IR Code (Only ZOOM mode)Discrete IR Code (Only RGB-PC mode)
Code (Hexa) Function Note
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
16/102
1. Application RangeThis service manual applies to all 60 PDP Monitors using theRF-03LA chassis.
2. Specification.
(1). Because this is not a hot chassis, it is not necessary to
use an isolation transformer. However, the use of isolationtransformer will help protect test instrument.
(2). Adjustment must be done in the correct order.(3). Unless otherwise specified, all adjustments must be
performed with room temperature between 20 and 30C
with 55% to 75% relative humidity.
(4). The input voltage of the receiver must keep 100~240V,50/60Hz.
(5). The receiver must be operated for about 15 minutes prior
to the adjustments.
* After RGB Full White in HEAT-RUN Mode, the receiver
must be operated prior to the adjustment.* Enter into HEAT-RUN MODE
1) Press the POWER ON KEY on R/C for adjustment2) Press the VOLUME + KEY. HEAT RUN WHITE OSD
display and screen display 100% full WHITE PATTERN.
- Set is activated HEAT run without signal generator in this
mode. Single color pattern ( RED / BLUE / GREEN ) of
HEAT RUN MODE uses to check panel.
Caution) If you turn on a still screen more than 20 minutes
(Especially digital pattern, cross hatch pattern), an after image or
screen burn may occur on the panel.
3. Adjustment item
3-1. SET assembly adjustment
(1). RGB Auto Cut-Off & MIN Bias & MAX Bias adjustmentstandard equipment: VG828, VG854, 801GF, MSPG3240A
or same product(2).Adjustment of POWER PCB Assembly voltage
(3). Adjustment of White Balance(4).Adjustment of Component Off-Set
(5).DDC Data input
Caution> Each PCB assembly must be checked by check JIG
set.
4. POWER PCB Assy Voltage adjustment
(Va, Vs voltage adjustment)4-1. Test equipment
D.M.M 1EA
4-2 Connection Diagram for MeasuringRefer to fig.1
4-3. Adjustment Method
4-3-1. PFC adjustment
(1) After receiving 100% Full White Pattern(06CH), HEATRUN.
(2) Connect + terminal of DMM to TP1 PFC+(J8302)
,connect -terminal to TP2 PFC-(J8301)(3) Adjust VR801 until voltage reading is 380V(1V).
4-3-2. Va adjustment(1) After receiving 100% Full White Pattern, HEAT RUN.
(2) Connect + terminal of DMM to Va pin of P805,connect -
terminal to GND pin of P805.(3) Adjust VR8401 until voltage reading matches the label
on the top/right of the panel( 0.5V).
4-3-3. Vs adjustment(1) Connect + terminal of DMM to Vs pin of P805,connect -
terminal to GND pin of P805.
(2) Adjust VR8501 until voltage reading matches the labelon the top/right of the panel( 0.5V).
- 16 -
ADJUSTMENT INSTRUCTIONS
Fig.1)connection Diagram of power adjustment for measuring
VR801
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
17/102
- 17 -
5. RGB Auto Cut-Off & MIN Bias /MAX Bias adjustment
(1) Input full white (255 Gray) signal from pattern generatorinto RGB.
(2) Press POWER ON KEY on R/C for adjustment and selectAuto Cut-Off .
(3) Press Vol. + KEY and operate TO SET.(4) Original full white screen will be presented about 3~5
seconds later. And if there is a mark of OK OSD, then auto
cut-off adjustment will be completed.(5) After adjustment, press ENTER Key to save adjustment
and exit adjustment mode.
O Data value, which adjusted in the board, is valid until the VSC
board is dissuaded and must be protected.O For the protection of data, Micom does not permit any more
adjustment.O In case of re-adjustment, operated first value setting.
1) Press both Volume +key of local key and instart key ofService Remote for adjustment.
2) Few seconds later, Temperture OSD display, then Pressinstop key of R/C for adjustment.
6. Adjustment of White Balance
6-1. Required EquipmentColor Analyzer ( CA-100 or similar product )
6-2. Connecting diagram of equipment for
measuring(Auto adjustment)
6-3. Adjustment of White Balance(Manualadjustment)
O Operate the zero-calibration of the CA-100, then stick sensor
to PDP module surface when you adjust..O For manual adjustment, it is also possible by the following
sequence.
(1)Select white pattern of heat-run mode by pressing poweron key on remote control for adjustment then operate heat
run more than 15 minutes.(2)Supply 216 gray level, 50% size length and breadth signal
to RGB input.(3)To adjust High Light, stick sensor to 216 gray level (or105~115 Cd/m2) pattern, press ADJ key on Service
Remote and D/E on Service Remote to select R-H or G-H, press VOL +.- key and adjust it until color coordination
matches below.
X: 0.280 ! 0.003 , Y; 0.290 ! 0.003
color temperature: 10,000K ! 500K
(4)Exit adjustment mode usingA Key.
6-4. Auto adjustment Map(RS-232C)
ADJUSTMENT INSTRUCTIONS
VA: 1, 2
VS: 8, 9, 10
GND: 3, 4, 5, 6
VR8501VS ADJ
VR8401
VA ADJ
Fig.2) Connection diagram of Vs, Va power adjustment for
measuring
Window Pattern
RS-232C
CVBS
MSPG-2100 or
MSTG-5200
High Light Adjustment
216 Gray Level
105~115Cd/
communication
Fig.3) Connection diagram of auto adjustment
signal input
MODEL
COMMUNI-
CATION
Type
Baud Rate
115200
RF-03LA
Data bit
8
RS-232
Stop bit
1
Parity
None
Protocol
Setting
Index
R-H
G-H
Cmd 1
j
j
Cmd 2
a
b
Data Min value
180(B4)
170(AA)
Max value
254(FE)
250(FA)
R-H 216
G-H 216
B-H 216
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
18/102
- 18 -
7. DDC Data INPUT
7-1. Required Equipment(1) A jig for adjusting PC, DDC (PC serial to D-sub connection
equipment)
(2) S/W for writing DDC (EDID Data Write & Read)(3) D-sub 15P Cable, D-Sub to DVI Connector(connect to DVI
Jack)
7-2. Setting of device
7-3. Preparation for Adjustment(1) Set device as above and turn the PC, jig on.
(2) Put S/W for writing DDC (EDID Data Write & Read) intooperation.(operate in DOS mode)
7-4. Sequence of AdjustmentO DDC data input for Analog-RGB
(1) Put the set on the table and turn the power on.
(2)Connect PC serial to D-sub 15P cable of jig for DDCadjustment to RGB terminal (D-Sub 15Pin).
(3)Operate S/W for DDC record and select DDC data foranalog RGB in model menu.
(4)Operate EDID Write command.
(5)Operate EDID Read command and check whether checksum is OK.
(6)If check sum is NG, repeat (3) ~ (4) .(7)IF Check Sum is OK,DDC data for Analog-RGB input is
completed.O DDC data input for Digital-RGB (DVI)
(1) Connect PC serial to DVI cable of jig for DDC adjustment
to DVI terminal (DVI Jack).(2) Operate S/W for DDC record and select DDC data for
digital RGB in model menu.(3)Operate EDID Write command.
(4)Operate EDID Read command and check whether check
sum is OK.(5) If check sum is NG, repeat (3) ~ (4)
(6)IF Check Sum is OK,DDC data for Analog-RGB input iscompleted.
8. Adjustment of Component Off-Set
8-1.Required Test EquipmentHD-STB(SK-011T) or similar product
8-2.Manual Adjustment of ComponentOFF-Set
(1) Input Video signal and Component 720P signal of HD-STB.
(2) Press ADJ key of R/C twice for entering twin picture mode.(3) Adjust the same color senses between main and sub,
using Volume +;- key of R/C in R,G,B Off-Set menu.
ADJUSTMENT INSTRUCTIONS
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
19/102
- 19 -
PRINTED CIRCUIT BOARD
MAIN(TOP)
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
20/102
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
21/102
- 21 -
PRINTED CIRCUIT BOARD
SMPS DC-DC (TOP)
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
22/102
- 22 -
SMPS DC-DC (BOTTOM)
PRINTED CIRCUIT BOARD
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
23/102
- 23 -
SMPS PFC (TOP)
PRINTED CIRCUIT BOARD
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
24/102
- 24 -
SMPS PFC (BOTTOM)
PRINTED CIRCUIT BOARD
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
25/102
- 25 -
PRINTED CIRCUIT BOARD
SPK (TOP)
SPK (BOTTOM)
CONTROL (TOP)
CONTROL (BOTTOM)
LOCAL KEY(TOP)
LOCAL KEY(BOTTOM)
VS PACK (TOP)
VS PACK (BOTTOM)
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
26/102
- 26 -
PRINTED CIRCUIT BOARD
POWER SWITCH(TOP) POWER SWITCH(BOTTOM)
POWER CONTROL (TOP) POWER CONTROL (BOTTOM)
VA (TOP)
VA (BOTTOM)
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
27/102
- 27 -
AV BOARD (TOP)
AV BOARD (BOTTOM)
PRINTED CIRCUIT BOARD
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
28/102
- 28 -
PRINTED CIRCUIT BOARD
AV FIX BOARD (TOP) AV FIX BOARD (BOTTOM)
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
29/102
- 29 -
BLOCK DIAGRAM
IC501
Rembrandt-I
Scaler
5V/3.3V/1.8V
#11
IC404
FLI2310
De_interlace
3.3V/2.5V
#10
IC201
AD9888
ADC
3.3V
#3
IC401
VPC3230(M)
Decoder
5V/3.3V
#9
IC202
Sil169B
TMDS_RX
3.3V
#4
IC502/503/504
K4S643232E
SDRAM(8Mbyte)
3.3V
#12
IC502/503/504
K4S643232E
SDRAM(8Mbyte)
3.3V
#12
YUV16bit
15Pin
D_
SUB
PC-IN
IC701
R8820LV
CPU
3.3V
#13
IC703
MX29LV160B
Flash-ROM
(2MByte)
3.3V
IC702
K6R4016V1C
SRAM
(512KB)
3.3V
21PIN
ForLG50
PDP-50
IC301
uPD64083
3D-Comb
9/5/3.3/2.5#8
DVI-I
IC405
K4S643232E
SDRAM(8Mbyte)
3.3V
#7
9PIN
RS-232C
IC750
DS232AS
RS-232C
5VST
P
ORT_
EXTEND
(74LVC244/74LVC574)
3.3V
#14
15Pin
D_
SUB
PC-OUT
IC101
CXA2089
SWITCH
Y/C
AV1
L/Rfor
Component
IC3
02
LA7
151
SWITCH
IC104
OPA3682
AMP
5V
#1
RGB/HV
H/V
RGBB
TX0`,TX1`
TX2`,TXC`
D0`,D1`
D2`,IDK`
RGBA
H/V/CLK/FIELD
T
XD0,1
R
XD0,1
SVHS
BNC
BNC
IC101
MSP3440
Sound
Processor
IC105
LA4282
AUDIOAMP
PCL/R
L/R
L/R
L/RforSVHS,BNC
2,3rdPin(T1,R1)
:Control/Download
4,6thPin(T2,R2)
:Debugging
IC601
Sil160
TMDS_
TX
3.3V
#16
Y/Pb/Pr(480i)
1HR/G/B
COMPONENTY/Pb/Pr
IC402
74LS123
5V
#9
MonostableMultivibrator
Y,Pb,Pr(480p`):high
Y,Cb,Cr(480i)
:low
YUV16bit
#:thenumberofthecircuitschematic
Indicateeven/odd
ford
e_interlace
24
24
8
8
T.M.D.S:
TransitionMinimized
DifferentialSignaling
PHILKIM2003.02.13
Wired_
OR
50KKPDPVSCBlockDiagram
A/VInterface
Comp480I/P,ID_AT
ID_PAL/NTSC,
FANALARM,KEY
CH1
CH0
U-Com
ID
Y/Pb/Pr
(480P
)
Y/C
Y/C
AV
PCL/R
CXA2089L/ROUT
IC752
74ACT253
5VST
IR
Y/C
STBL/RfromLST-2200
STBL/R
FLI2310
De_interlace
3.3V/2.5V
#6
K4S643232E
SDRAM(8Mbyte)
3.3V
#7
RGB(PC)
RGB(DTV)
YUV
(Video)
VPC3230(S)
Decoder
5V/3.3V
#5
AV
AV
Y/C
Buff
T541#6
24
24
16
Scart1
R/G/B
Scart2
Half
IC101
CXA2089
SWITCH
S2_
V,L/R
Y/C
PAL
SyncsignalforR/G/B,L/R
SVHS
L/RforSVHS
NTSC Y
/C
Y/C
1HR/G/B
RGB
74HCT08
TX
"
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
30/102
- 30 -
EXPLODED VIEW
551 560550
102
101
600
400
401
520
521
540
301
302
306
303
304
330
630200
201
620
610
530
640
300
305
580
570
590
202
203
204
206
208
213
207
210
211
212
209
205
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
31/102
- 31 -
EXPLODED VIEW PARTS LIST
101 5900V08004A FAN,DC F8025L12B2-RG 80MM 12V 120MA 2300RPM 79G L 300MM
102 5900V28001A FAN,DC F5010L12B DONGYANG 50*50*10 DC12V 60MA 3,700RPM 21G
200 6348Q-B037A PDP,60 16:9 1365*768 PDP60X50300.AKLGG
201 6871QDH035A PWB(PCB) ASSEMBLY,DISPLAY YDRV ASSY HAND INSERT TOP(60X5)
202 6871QDH036A PWB(PCB) ASSEMBLY,DISPLAY YDRV ASSY HAND INSERT BOTTOM(60X5)
203 6871QLH023A PWB(PCB) ASSEMBLY,DISPLAY XRLT ASSY HAND 60X5 X-LEFT BOTTOM
204 6871QXH014A PWB(PCB) ASSEMBLY,DISPLAY XRCT ASSY HAND 60X5 X-CENTER BOTTOM
205 6871QRH023A PWB(PCB) ASSEMBLY,DISPLAY XRRT ASSY HAND 60X5 X RIGHT BOTTOM
206 6871QYH023A PWB(PCB) ASSEMBLY,DISPLAY YSUS ASSY HAND INSERT 60X5
207 6871QPH008A PWB(PCB) ASSEMBLY,DISPLAY DCDC ASSY HAND INSERT KK MODEL
208 6871QCH028A PWB(PCB) ASSEMBLY,DISPLAY CTRL ASSY HAND 50X2 & 60X5 280*180
209 6871QZH025A PWB(PCB) ASSEMBLY,DISPLAY ZSUS ASSY HAND INSERT 60X5
210 6871QLH022A PWB(PCB) ASSEMBLY,DISPLAY XRLT ASSY HAND INSERT 60X5 X-LEFT TOP
211 6871QXH013A PWB(PCB) ASSEMBLY,DISPLAY XRCT ASSY HAND 60X5 X-CENTER TOP
212 6871QRH022A PWB(PCB) ASSEMBLY,DISPLAY XRRT ASSY HAND 60X5 X RIGHT TOP
213 6871QEH017A PWB(PCB) ASSEMBLY,DISPLAY ETC HAND PDP50X20000 TEMP. SENSOR B/D
300 3091V00A39D CABINET ASSEMBLY,MU-60PZ30M STEREO RF03LA FOR ZENITH
301 4980V00142B SUPPORTER,FILTER AL5052 NONE
302 4980V00142A SUPPORTER,FILTER AL5052 NONE
303 4980V00143B SUPPORTER,FILTER AL5052 NONE
304 4980V00143A SUPPORTER,FILTER AL5052 NONE
305 3790V00267C FILTER(MECH), MN60PZ90V KK GLASS NBK ETCHING MESH 1160G03EK
306 4980V00141A SUPPORTER,FILTER AL5052 NONE
330 5020V00436A BUTTON,FD- 60X3 .
400 3809V00280E BACK COVER ASSEMBLY,MU-60PZ12V NON VERTICAL
401 3300V00237F PLATE,A/V AL .. FOR KK 30TOOL
520 6871VMMQ81A PWB(PCB) ASSEMBLY,MAIN RF-03LA 60 VSC MU
521 4814V00332E SHIELD, PLATE MZ-42PZ44 RF03FA ET SUSTAIN
530 6871VPMA20B PWB(PCB) ASSEMBLY,POWER SMPS RF-03LA PFC MU
540 6871VPMA19A PWB(PCB) ASSEMBLY,POWER SMPS RF-03LA POWER
550 6871VSMV67A PWB(PCB) ASSEMBLY,SUB CONT RF03LA LOCAL KEY
551 5020V00437A BUTTON,4KEY FD- 60X3 .
560 6871VSMV66A PWB(PCB) ASSEMBLY,SUB RF03LA SPK
570 6871VSMW14A PWB(PCB) ASSEMBLY,SUB A/V RF03LA 60 AV FIX B/D
580 6871VSMW13A PWB(PCB) ASSEMBLY,SUB A/V RF03LA 60 AV INTERFACE590 3141VSN186C CHASSIS ASSEMBLY,SUB RF03LA LINE FILTER ASSY TWIST #15
600 3141VSN122B CHASSIS ASSEMBLY,SUB NP00KA POWER SWITCH
610 6871VSMV70A PWB(PCB) ASSEMBLY,SUB POWER RF03LA CONTROL
620 6871VSMV69A PWB(PCB) ASSEMBLY,SUB POWER RF03LA VS M/I
630 6871VSMV68A PWB(PCB) ASSEMBLY,SUB POWER RF03LA VA M/I
640 6871VSMV71A PWB(PCB) ASSEMBLY,SUB SUB RF03LA PFC PACK
No. Part No. Description
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
32/102
- 32 -
REPLACEMENT PARTS LIST
LOCA. NO PART NO DESCRIPTION
IC749
IC750IC751
IC801
IC802
IC8102
IC8103
IC8104
IC8131
IC8204
IC8205
IC850
IC851
IC853
IC857
IC858
IC859
IC8602
IC8603
IC8604
IC8631
IC8801
IC8802
IC8803
IC8804
IC8805
IC8806
IC8900
IC901
IC902
IC903
IC904
IC917
PC8201
PC8202
PC8401
PC8402
PC8403
PC8501PC8502
PC8503
PC8504
PC8801
IC105
IC106
IC203
0IKE702700D
0IDS232000A0IPH858400A
0IUN385400B
0ISA428200A
0IIR121130A
0IRH103392A
0ISH121100D
0IUN386300B
0ISK005000A
0IKE781200P
0IMCRSJ001A
0IPRPML001A
0IMCRRH001A
0IMCRRH001A
0IMCRSH001A
0IMCRSH001A
0IIR121130A
0IRH103392A
0ISH121100D
0IUN386300B
0ISK666813A
0ISK005000A
0IFA754207A
0IPMGSK009A
0ISK805011A
0ISK812011A
0ISH817300B
0IMCRMN014A
0IKE780800J
0IMCRSH001A
0IKE704200J
0IFA742530B
0ILI817000G
0ILI817000G
0ILI817000G
0ILI817000G
0ILI817000G
0ILI817000G0ISH851000A
0ILI817000G
0ILI817000G
0ILI817000G
0TR830009BA
0TR830009BA
0TR830009BA
KIA7027AF 3
DS232AS 16P DRIVER/RECEIVERPCF8584T 20P IIC BUS CONTROLLER
UC3854BDW 20PLCC R/TP PFC
LA4282 12S 2CHX10W AUDIO AMP - - - -
1R2113S 16SOP R/TP H/BRIDGE DRIVER
BA10339FV-E2 SSOP-B14PIN
PQ12DZ1U 5 SMD R/TP
UC3863DW 20PLCC R/TP PFZO
SE005N 3P TO-220 BK 5V ERROR AMP
KIA7812API TO220 ST 3P 12V
SC1565IST-1.8 SEMTECH 3P SOT223 TP
MIC39100 3P SOT223 LDO TYPE 2.5V
BA033FP ROHM 3P-SOP REGULATOR
BA033FP ROHM 3P-SOP REGULATOR
PQ05DZ1U SHARP 5, SMD REGULATOR
PQ05DZ1U SHARP 5, SMD REGULATOR
1R2113S 16SOP R/TP H/BRIDGE DRIVER
BA10339FV-E2 SSOP-B14PIN
PQ12DZ1U 5 SMD R/TP
UC3863DW 20PLCC R/TP PFZO
STR-F6668B(LF1352) 5PIN BK STR
SE005N 3P TO-220 BK 5V ERROR AMP
KA75420ZTA(KA7542ZTA) 3P,TO-92
SI-8033S(LF1113) SANKEN 5P TO-220
SI-8050S(LF1113) 5PIN BK 5V REGUATOR
SI-8120S(LF1113) 5PIN BK 12V
PC817XF3 4D PHOTO COUPLER
MSP3440G QA B8 V3 80 QFP TRAY
KIA7808API 3 ST REGULATOR .
PQ05DZ1U SHARP 5, SMD TYPE
KIA7042AF SOT-89 TP 4.2V VOLTAGE
74ACT253SC 16P-SOIC, JEDEC MS-012
LTV817M-VB 4P
LTV817M-VB 4P
LTV817M-VB 4P
LTV817M-VB 4P
LTV817M-VB 4P
LTV817M-VB 4PPC851 4P,DIP
LTV817M-VB 4P
LTV817M-VB 4P
LTV817M-VB 4P
BSS83
BSS83
BSS83
LOCA. NO PART NO DESCRIPTION
IC001
IC002
IC101
IC102
IC103
IC104
IC107
IC1101
IC1102
IC1103
IC1104
IC1105
IC1201
IC1202
IC1203
IC1204
IC1205
IC1401
IC1405
IC1406
IC202
IC301
IC401
IC402
IC403IC405
IC407
IC410
IC501
IC502
IC503
IC504
IC601
IC701
IC702
IC703
IC704
IC740
IC741
IC742
IC743
IC744
IC745
IC746
IC747
IC748
0ISO208900A
0IMCRFA010A
0IAL242110A
0IAL242110A
0IMCRTI003A
0IPRPBB005A
0IKE704200J
0IDS162100B
0IMCRPH015A
0ISH092100B
0ISH122100B
0ISH122100B
0IMCRTI021A
0IMCRTI021A
0IMCRTI021A
0IMCRTI021A
0IMCRTI021A
0IIT323000E
0IMCRGN001B
0IMMRHY033A
0IMCRS5003A
0IMCRAD003A
0IIT323000E
0ISA715100D
0IFA741230A0IMCRGN001B
0IMMRHY033A
0IMMRNE002A
0IMCROT001A
0IMMRHY033A
0IMMRHY033A
0IMMRHY033A
0IS5160000A
0IMCRRS001A
0IMMRSS064A
0IMMRMR006B
0IMCRAL006A
0IMCRPH017A
0IMCRFA013A
0IMCRFA013A
0ITI745740M
0IMCRPH017A
0IFA741230A
0IMCRPH015A
0IMCRPH016A
0IMCRPH014A
CXA2089Q 48QFP
KA7809R
AT24C21-10SI-2.5
AT24C21-10SI-2.5
SN74HCT08D
OPA3692IDBQ
KIA7042AF SOT-89
DS1621V 8P SOIC ST THERMOSTAT -
74LVC32AD
PQ09RD21 4SIP ST REGULATOR -
PQ12RD21 4SIP ST REGULATOR -
PQ12RD21 4SIP ST REGULATOR -
SN74LVTH541PWR
SN74LVTH541PWR
SN74LVTH541PWR
SN74LVTH541PWR
SN74LVTH541PWR
VPC3230D
FLI2310BC
HY57V643220C(L)T-6
SIL169 CL100
AD9888KS-140
VPC3230D C5 80P
LA7151M 10SOP R/TP AUDIO SW
DM74LS123MX 16SOPFLI2310BC
HY57V643220C(L)T-6
UPD64083GF3BA
REMBRANT-1A OPLUS
HY57V643220C(L)T-6
HY57V643220C(L)T-6
HY57V643220C(L)T-6
SII160 100 TQFP
R8820LV RDC
K6R4016V1D-TC10
MX29LV160ATTC-70
AT24C16AN-10SI-2.7
74LVC574APW
74LCX244MTC
74LCX244MTC
SN74HC574NSR
74LVC574APW
DM74LS123MX 16SOP
74LVC32AD
74LVC139D
74LV132D
IC
RUN DATE : 2003.10.21
For Capacitor & Resistors, thecharactors at 2nd and 3rd digitin the P/No. means as follows;
CC, CX, CK, CN : CeramicCQ : PolyestorCE : Electrolytic
RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible
TRANSISTOR
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
33/102
- 33 -
LOCA. NO PART NO DESCRIPTION
IC204
Q001
Q001
Q002
Q002
Q003
Q003
Q004
Q005
Q006
Q007
Q008
Q009
Q1
Q2
Q200
Q201Q202
Q203
Q204
Q205
Q206
Q207
Q209
Q211
Q410
Q411
Q412
Q413
Q414
Q415
Q416
Q417
Q418
Q419
Q420
Q421
Q422
Q423
Q424
Q450
Q471
Q472
Q473
Q474
Q475
Q476
Q477
Q478
Q7105
Q7107
0TR830009BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR150400BA
0TR387500AA
0TR150400BA
0TR150400BA
0TR150400BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR104009AF
0TR387500AA
0TR387500AA
BSS83
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KECCHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KECCHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP KRC104S SOT-23 TP KEC - -
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
LOCA. NO PART NO DESCRIPTION
Q720
Q721
Q722
Q723
Q724
Q725
Q801
Q802
Q803
Q804
Q806
Q808
Q8101
Q8102
Q8104
Q8105
Q8105Q8106
Q8107
Q8108
Q8108
Q8201
Q8203
Q8204
Q8205
Q8206
Q8207
Q8208
Q8210
Q8303
Q8304
Q8401
Q8402
Q8403
Q8501
Q8502
Q8503
Q8504
Q8505
Q8601
Q8602
Q8604
Q8605
Q8606
Q8607
Q8608
Q8802
Q8803
Q8804
Q8805
Q8900
0TR387500AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR387500AA
0TR176608AA
0TR387500AA
0TR118008AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR150400BA
0TR150400BA
0TR387500AA
0TR150400BA0TR102009AG
0TR150400BA
0TR387500AA
0TR150400BA
0TR319809AA
0TR102009AB
0TR319809AA
0TR102009AB
0TR319809AA
0TR322709AA
0TR322709AA
0TR319809AA
0TFIR10001A
0TFIR10001A
0TF283700AA
0TF283700AA
0TR322709AA
0TF283700AA
0TF283700AA
0TF283700AA
0TF283700AA
0TR320709AA
0TR150400BA
0TR150400BA
0TR150400BA
0TR387500AA
0TR102009AG
0TR150400BA
0TR387500AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR387500AA
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
2SD1766Q R/TP ROHM KOREA SMD
CHIP 2SC3875S(ALY) KEC
2SB1188Q R/TP ROHM KOREA SMD
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KECCHIP KRC102S KEC TP SOT-23 NA NA
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
KTC3198(KTC1815)
KRC102M(KRC1202) KEC TP NA NA NA
KTC3198(KTC1815)
KRC102M(KRC1202) KEC TP NA NA NA
KTC3198(KTC1815)
KTC3227-Y,TP(KTC1627A),KEC
KTC3227-Y,TP(KTC1627A),KEC
KTC3198(KTC1815)
IRFPS37N50A
IRFPS37N50A
2SK2837 BK TOSHIBA 500V 20A TO3P
2SK2837 BK TOSHIBA 500V 20A TO3P
KTC3227-Y,TP(KTC1627A),KEC
2SK2837 BK TOSHIBA 500V 20A TO3P
2SK2837 BK TOSHIBA 500V 20A TO3P
2SK2837 BK TOSHIBA 500V 20A TO3P
2SK2837 BK TOSHIBA 500V 20A TO3P
KTC3207,TP(KTC2482),KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KECCHIP 2SC3875S(ALY) KEC
CHIP KRC102S KEC TP SOT-23 NA NA
CHIP 2SA1504S(ASY) KEC
CHIP 2SC3875S(ALY) KEC
KTC3198(KTC1815)
KTC3198(KTC1815)
KTC3198(KTC1815)
KTC3198(KTC1815)
CHIP 2SC3875S(ALY) KEC
REPLACEMENT PARTS LIST
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
34/102
- 34 -
LOCA. NO PART NO DESCRIPTION
Q8901
Q8902
Q8903
Q8904
Q8905
Q8906
Q8907
Q8908
Q8909
QA201
QA202
D001
D001
D002
D002D003
D003
D004
D006
D011
D100
D101
D102
D105
D106
D108
D109
D110
D1101
D111
D112
D113
D114
D115
D117
D118
D801
D802
D803
D804
D805
D807
D8101
D8102
D8104
D8105
D8201
D8202
D8203
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR102009AG
0TR102009AG
0TR387500AA
0TR150400BA
0TR102009AG
0TR150400BA
0TR150400BA
0DD184009AA
0DD181009AB
0DD184009AA
0DD181009AB0DD184009AA
0DD181009AB
0DD184009AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD100009AC
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD226239AA
0DZ240009CG
0DZ910009AJ
0DZ750009AG
0DZ240009CG
0DD120000BB
0DZRM00178A
0DZ620009BB
0DR011009AA
0DD184009AA
0DD184009AA
0DD414809ED
0DD414809ED
0DD260000BB
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP 2SC3875S(ALY) KEC
CHIP KRC102S KEC TP SOT-23 NA NA
CHIP KRC102S KEC TP SOT-23 NA NA
CHIP 2SC3875S(ALY) KEC
CHIP 2SA1504S(ASY) KEC
CHIP KRC102S KEC TP SOT-23 NA NA
CHIP 2SA1504S(ASY) KEC
CHIP 2SA1504S(ASY) KEC
KDS184S CHIP 85V 300MA KEC TP
KDS181 TP KEC - 85V - - - 300MA
KDS184S CHIP 85V 300MA KEC TP
KDS181 TP KEC - 85V - - - 300MAKDS184S CHIP 85V 300MA KEC TP
KDS181 TP KEC - 85V - - - 300MA
KDS184S CHIP 85V 300MA KEC TP
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
RU1V(1) TP SANKEN
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
MTZJ24B TP DO34 - 24V 5UA -
MTZJ9.1B TP DO34 0.5W 9.1V 5UA -
MTZJ7.5B TP DO34 0.5W 7.5V 5UA -
MTZJ24B TP DO34 - 24V 5UA -FML-G12S
UDZS TE-17 5.1B
MTZJ6.2B TP DO34 0.5W 6.2V 5UA -
EG01AV1 TP SANKEN NON 600V 0.5
KDS184S CHIP 85V 300MA KEC TP
KDS184S CHIP 85V 300MA KEC TP
1N4148 TP GRANDE - - - - - -
1N4148 TP GRANDE - - - - - -
BRIDGE D2SBA60(STK) SHINDENKEN
LOCA. NO PART NO DESCRIPTION
D8204
D8205
D8206
D8208
D8209
D8210
D8211
D8212
D8213
D8214
D8215
D8216
D8217
D8301
D8302
D8303
D8304D8305
D8306
D8307
D8311
D8312
D8319
D8401
D8402
D8403
D8404
D8405
D8406
D8407
D8408
D8409
D8411
D8412
D8412
D8414
D8418
D8419
D8501
D8502
D8503
D8504
D8505
D8506
D8507
D8508
D8509
D8510
D8511
D8512
D8515
0DD110009DB
0DD100009AP
0DD120000BB
0DR010009AA
0DD100009AM
0DZ160009BC
0DZ180009AG
0DR010009AA
0DD100009AP
0DD100009AM
0DZ300009BB
0DZ300009BB
0DZ750009AG
0DD414809ED
0DD414809ED
0DB250600AB
0DR310000BA0DR310000BA
0DD410009AA
0DD410009AA
0DRFJ00041A
0DD100009AP
0DD410009AA
0DD100009AP
0DD414809ED
0DD414809ED
0DR240000BA
0DZ330009BA
0DZ330009BA
0DD100009AP
0DZ120009AF
0DZ680009BB
0DZ360009BC
0DZ330009BA
0DZ680009BB
0DR220000CA
0DD414809ED
0DZ120009AF
0DD100009AP
0DZ610009AA
0DZ610009AA
0DD100009AP
0DRSA00160A
0DD100009AP
0DD100009AP
0DZ120009AF
0DRSA00160A
0DZ680009BB
0DZ610009AA
0DZ330009BE
0DD414809ED
RM11CV(1) TP SANKEN
EG1ZV(1) TP SANKEN TP
FML-G12S
EG01C - 1000V 0.5A 10A 100NSEC 50UA
EU1ZV(1) TP
MTZJ16B TP DO34 0.5W 16V 5UA -
MTZJ18B TP DO34 - 18V 5UA -
EG01C - 1000V 0.5A 10A 100NSEC 50UA
EG1ZV(1) TP TP
EU1ZV(1) TP
MTZJ30B TP DO34 0.5W 30V 5UA -
MTZJ30B TP DO34 0.5W 30V 5UA -
MTZJ7.5B TP DO34 0.5W 7.5V 5UA -
1N4148 TP GRANDE - - - - - -
1N4148 TP GRANDE - - - - - -
RBV-2506 BK - 600V 25A 350A - 50UA
RM3A LF-U1 BK - 600V 2.5A 150A - 10UARM3A LF-U1 BK - 600V 2.5A 150A - 10UA
SCHOTTKY,BAT 41 TP
SCHOTTKY,BAT 41 TP
YG963S6R 600V 15A 50A 30NSSEC 50UA
EG1ZV(1) TP TP
SCHOTTKY,BAT 41 TP
EG1ZV(1) TP TP
1N4148 TP GRANDE - - - - - -
1N4148 TP GRANDE - - - - - -
FML-24S TO220 400V 10A 70A 40NSEC
ZENER HZT33 TAPING
ZENER HZT33 TAPING
EG1ZV(1) TP TP
MTZJ12B TP DO34 - 12V 5UA -
MTZJ6.8B TP DO34 0.5W 6.8V 5UA -
MTZJ3.6B TP DO34 0.5W 3.6V 5UA -
ZENER HZT33 TAPING
MTZJ6.8B TP DO34 0.5W 6.8V 5UA -
FMM-22S BK TO220 200V 10A 100A - 10UA
1N4148 TP GRANDE - - - - - -
MTZJ12B TP DO34 - 12V 5UA -
EG1ZV(1) TP TP
P6KE100A TP G.I - 1W 100V 1UA -
P6KE100A TP G.I - 1W 100V 1UA -
EG1ZV(1) TP TPFML-34S FM80 400V 20A 100A 50NSEC
EG1ZV(1) TP TP
EG1ZV(1) TP TP
MTZJ12B TP DO34 - 12V 5UA -
FML-34S FM80 400V 20A 100A 50NSEC
MTZJ6.8B TP DO34 0.5W 6.8V 5UA -
P6KE100A TP G.I - 1W 100V 1UA -
MTZJ3.3A TP DO34 - 3.3V 5UA -
1N4148 TP GRANDE - - - - - -
REPLACEMENT PARTS LIST
DIODE
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
35/102
- 35 -
LOCA. NO PART NO DESCRIPTION
D854
D855
D857
D8601
D8602
D8604
D8605
D870
D871
D873
D880
D8801
D8802
D8803
D8804
D881
D8811D8812
D8813
D8814
D8816
D8818
D882
D8820
D8821
D8822
D8823
D883
D8900
D8901
D8903
D8904
D8907
D900
DA105
LD1
LD300
LD740
LD741
LD742
LD743
LD744
LD745
ZD003
ZD004
ZD005
ZD100
ZD830
ZD831
ZD832
ZD8902
0DD226239AA
0DD226239AA
0DD226239AA
0DZ620009BB
0DR011009AA
0DD184009AA
0DD184009AA
0DD226239AA
0DD226239AA
0DD226239AA
0DL233309AC
0DD100009AM
0DD100009AM
0DD414809ED
0DD100009DK
0DL233309AC
0DR290000AA0DR360000BA
0DR360000BA
0DR460009AA
0DR460009AA
0DR460009AA
0DL233309AC
0DD100009AM
0DZ120009AF
0DZ750009AG
0DZ750009AG
0DL233309AC
0DD184009AA
0DD184009AA
0DD226239AA
0DD226239AA
0DD226239AA
0DD100009AM
0DD226239AA
0DL200000CA
0DL233309AC
0DL233309AC
0DL233309AC
0DL233309AC
0DL233309AC
0DL233309AC
0DL233309AC
0DZRM00178A
0DZRM00178A
0DZRM00178A
0DR050008AA
0DR050008AA
0DR050008AA
0DR050008AA
0DZRM00178A
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
MTZJ6.2B TP DO34 0.5W 6.2V 5UA -
EG01AV1 TP NON 600V 0.5
KDS184S CHIP 85V 300MA KEC TP
KDS184S CHIP 85V 300MA KEC TP
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
LED SAM2333
EU1ZV(1) TP
EU1ZV(1) TP
1N4148 TP GRANDE - - - - - -
RU1P V(1) 1000V 0.4A 10A 0.1US 5UA
LED SAM2333
FMB-29L 90V 8A 60A 100NSEC 5MAFMB-36M BK - 0.62V - - 100NSEC 10MA
FMB-36M BK - 0.62V - - 100NSEC 10MA
RK46 TP 60V 3.5A 70A 100SEC 3MA
RK46 TP 60V 3.5A 70A 100SEC 3MA
RK46 TP 60V 3.5A 70A 100SEC 3MA
LED SAM2333
EU1ZV(1) TP
MTZJ12B TP DO34 - 12V 5UA -
MTZJ7.5B TP DO34 0.5W 7.5V 5UA -
MTZJ7.5B TP DO34 0.5W 7.5V 5UA -
LED SAM2333
KDS184S CHIP 85V 300MA KEC TP
KDS184S CHIP 85V 300MA KEC TP
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
CHIP KDS226 SOT-23
EU1ZV(1) TP
CHIP KDS226 SOT-23
LED SAM5670(DL-2LRG) BK Y-GREEN -
LED SAM2333
LED SAM2333
LED SAM2333
LED SAM2333
LED SAM2333
LED SAM2333LED SAM2333
UDZS TE-17 5.1B
UDZS TE-17 5.1B
UDZS TE-17 5.1B
SD05.TC
SD05.TC
SD05.TC
SD05.TC
UDZS TE-17 5.1B
LOCA. NO PART NO DESCRIPTION
ZD8906
ZD8908
C005
C006
C007
C008
C010
C012
C013
C014
C014
C015
C015
C017
C018C019
C019
C020
C020
C021
C022
C022
C023
C023
C024
C024
C025
C025
C026
C029
C030
C030
C031
C034
C035
C038
C039
C040
C041
C042
C042
C043
C044
C045
C045
C046
C047
C048
C050
0DZ560009CF
0DZRM00178A
0CE107SF6DC
0CE476SF6DC
0CE106SF6DC
0CE476SF6DC
0CE227VF6DC
0CE107SF6DC
0CE476SF6DC
0CE476SF6DC
0CE106SF6DC
0CE476SF6DC
0CE106SF6DC
0CE107SF6DC
0CE474SK6DC0CE474SK6DC
0CE476SF6DC
0CE105SK6DC
0CE335SK6DC
0CE106SF6DC
0CE474SK6DC
0CE105SK6DC
0CE474SK6DC
0CE105SK6DC
0CE474SK6DC
0CE105SK6DC
0CE474SK6DC
0CE105SK6DC
0CE105SK6DC
0CE106SF6DC
0CE107SF6DC
0CE105SK6DC
0CE105SK6DC
0CE476SF6DC
0CE105SK6DC
0CE476SF6DC
0CE105SK6DC
0CE227VF6DC
0CE477DK618
0CE476SF6DC
0CE477DK618
0CE476SF6DC
0CE107DH618
0CE476SF6DC
0CE106SF6DC
0CQ6821N509
0CE107DH618
0CQ6821N509
0CE107SF6DC
MTZJ5.6B TP DO34 0.5W 5.6V 5UA -
UDZS TE-17 5.1B
100UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
220UF MV 16V 20% R/TP(SMD) SMD
100UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
100UF MVG 16V M SMD R/TP
0.47UF MVG 50V M SMD R/TP0.47UF MVG 50V M SMD R/TP
47UF MVG 16V M SMD R/TP
1UF MVG 50V M SMD R/TP
3.3UF MVG 50V 20% SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
0.47UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
0.47UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
0.47UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
0.47UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
100UF MVG 16V M SMD R/TP
1UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
47UF MVG 16V M SMD R/TP
1UF MVG 50V M SMD R/TP
47UF MVG 16V M SMD R/TP
1UF MVG 50V M SMD R/TP
220UF MV 16V 20% R/TP(SMD) SMD
470UF STD 50V 20% FL TP 5
47UF MVG 16V M SMD R/TP470UF STD 50V 20% FL TP 5
47UF MVG 16V M SMD R/TP
100UF STD 25V M FL TP5
47UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
0.0068U 100V K POLY TP
100UF STD 25V M FL TP5
0.0068U 100V K POLY TP
100UF MVG 16V M SMD R/TP
REPLACEMENT PARTS LIST
CAPACITOR
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
36/102
- 36 -
LOCA. NO PART NO DESCRIPTION
C053
C056
C057
C058
C059
C109
C110
C1102
C1106
C1107
C1108
C111
C1110
C1111
C112
C113
C114C117
C119
C121
C123
C126
C127
C140
C1479
C1485
C1488
C1489
C1491
C1494
C1505
C1506
C1507
C1510
C2
C201
C204
C207
C211
C216
C221
C410
C413
C416
C420
C440
C441
C445
C471
C472
C479
0CE106SF6DC
0CE107DH618
0CQ1041N509
0CE106SF6DC
0CQ1041N509
0CE107SF6DC
0CE107SF6DC
0CE106SF6DC
0CE227VF6DC
0CE105SK6DC
0CE105SK6DC
0CE107SF6DC
0CE105SK6DC
0CE105SK6DC
0CE107SF6DC
0CE107SF6DC
0CE107SF6DC0CE107SF6DC
0CE477VF6DC
0CE477VF6DC
0CE477VF6DC
0CE476SF6DC
0CE476SF6DC
0CE107SF6DC
0CE106SF6DC
0CE107SF6DC
0CE106SF6DC
0CK224DF56A
0CE106SF6DC
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CE4763F618
0CE476SF6DC
0CE476SF6DC
0CE476SF6DC
0CE476SF6DC
0CE476SF6DC
0CE476SF6DC
0CE107SF6DC
0CE476SF6DC
0CE476SF6DC
0CN105EJ56A
0CE106SF6DC
0CN105EJ56A
0CE106SF6DC
0CE106SF6DC
0CE106SF6DC
0CE106SF6DC
10UF MVG 16V 20% R/TP(SMD) SMD
100UF STD 25V M FL TP5
0.1U 100V K POLY TP
10UF MVG 16V 20% R/TP(SMD) SMD
0.1U 100V K POLY TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
1UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
100UF MVG 16V M SMD R/TP
1UF MVG 50V M SMD R/TP
1UF MVG 50V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP100UF MVG 16V M SMD R/TP
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
100UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
220000PF 2012 16V 10% R/TP X7R
10UF MVG 16V 20% R/TP(SMD) SMD
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
47UF SRE 16V M FL TP5
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
1.0UF 3216 35V 10% R/TP X7R
10UF MVG 16V 20% R/TP(SMD) SMD
1.0UF 3216 35V 10% R/TP X7R
10UF MVG 16V 20% R/TP(SMD) SMD
10UF MVG 16V 20% R/TP(SMD) SMD
10UF MVG 16V 20% R/TP(SMD) SMD
10UF MVG 16V 20% R/TP(SMD) SMD
LOCA. NO PART NO DESCRIPTION
C485
C488
C489
C491
C494
C505
C506
C507
C510
C523
C524
C671
C672
C673
C674
C675
C676C7116
C728
C755
C758
C760
C765
C766
C769
C770
C772
C774
C785
C787
C788
C789
C791
C793
C801
C804
C806
C809
C810
C8101
C8102
C8105
C8106
C8107
C811
C8110
C8111
C812
C813
C818
C820
0CE107SF6DC
0CE106SF6DC
0CK224DF56A
0CE106SF6DC
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CK224DF56A
0CN105EJ56A
0CE106SF6DC
0CE477DK618
0CE477DK618
0CE477DK618
0CE477DK618
181-120K
181-120K0CE475WJ6DC
0CE476SF6DC
0CE476SF6DC
0CE476SF6DC
0CE477VF6DC
0CE477VF6DC
0CE477VF6DC
0CE477VF6DC
0CE227VF6DC
0CE477VF6DC
0CE227VF6DC
0CE476SF6DC
0CE107SF6DC
0CE476SF6DC
0CE476SF6DC
0CE227VF6DC
0CE227VF6DC
0CE106WH6DC
0CE105WK6DC
0CQ2221N509
0CE105WK6DC
0CK104DK56A
0CE106WH6DC
0CK104DK56A
0CE106WH6DC
0CE106WH6DC
0CK104DK56A
0CE106WH6DC
0CE106WH6DC
0CK104DK56A
0CE107SF6DC
0CE106WH6DC
0CE106WH6DC
0CE227VF6DC
100UF MVG 16V M SMD R/TP
10UF MVG 16V 20% R/TP(SMD) SMD
220000PF 2012 16V 10% R/TP X7R
10UF MVG 16V 20% R/TP(SMD) SMD
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
220000PF 2012 16V 10% R/TP X7R
1.0UF 3216 35V 10% R/TP X7R
10UF MVG 16V 20% R/TP(SMD) SMD
470UF STD 50V 20% FL TP 5
470UF STD 50V 20% FL TP 5
470UF STD 50V 20% FL TP 5
470UF STD 50V 20% FL TP 5
2200PF 4KV M E FMTW LEAD 4.5
2200PF 4KV M E FMTW LEAD 4.54.7UF MVK 35V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
220UF MV 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
10UF MVK 25V 20% R/TP(SMD) SMD
1UF MVK 50V 20% R/TP(SMD) SMD
0.0022U 100V K POLY TP
1UF MVK 50V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
10UF MVK 25V 20% R/TP(SMD) SMD10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
10UF MVK 25V 20% R/TP(SMD) SMD
10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
100UF MVG 16V M SMD R/TP
10UF MVK 25V 20% R/TP(SMD) SMD
10UF MVK 25V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
REPLACEMENT PARTS LIST
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
37/102
- 37 -
LOCA. NO PART NO DESCRIPTION
C820
C8202
C8203
C8204
C8205
C8206
C8207
C8209
C8210
C8211
C8212
C8213
C8213
C8214
C8215
C8216
C8217C8217
C8218
C8219
C8220
C8221
C8222
C8223
C8225
C824
C8301
C8302
C8303
C8304
C8305
C8306
C8307
C8308
C8309
C8311
C8312
C8313
C8314
C8315
C8316
C8317
C8318
C8319
C8320
C8321
C8322
C8327
C8328
C8329
C8330
0CE105WK6DC
0CQ1031N509
0CE105BK618
0CE226BV611
0CE477BJ618
181-010K
0CE226BV611
181-010K
0CE477BH618
0CK1040K945
0CE108BF618
181-091D
181-091P
181-091P
181-033E
0CE108BF618
181-091D181-091P
0CE474QV618
0CE474QV618
0CE107BJ618
0CK1040K945
0CE227BH618
0CE476BK618
0CQ1041N509
0CE477VF6DC
0CQZVBK002D
0CQZVBK002D
0CQZVBK002D
181-120K
181-120K
0CQZVBK002D
0CB8241Y474
0CB8241Y474
181-035N
0CE337RV6A0
0CE337RV6A0
181-035N
0CE337RV6A0
181-091D
181-033E
181-091D
181-091G
181-091G
0CE477BH618
0CQZVBK002D
0CQZVBK002B
181-033E
181-033E
181-033E
181-033E
1UF MVK 50V 20% R/TP(SMD) SMD
0.01U 100V K POLY TP
1UF KME 50V M FL TP5
22UF KME TYPE 450V M FL BK7.5
470UF KME TYPE 35V 20% FL TP 5
PP 0.01UF 630V 5% FM 7.5MM
22UF KME TYPE 450V M FL BK7.5
PP 0.01UF 630V 5% FM 7.5MM
470UF KME TYPE 25V 20% FL TP 5
0.1UF 50V Z F TR
1000UF KME 16V M FL TP5
DEHR33A102KN2A 1000PF 1KV 10%,-10%
SL 270PF 1KV 10%,-10% R/TP TP5
SL 270PF 1KV 10%,-10% R/TP TP5
CK 2200PF 1KV 10% TR 7.5MM
1000UF KME 16V M FL TP5
DEHR33A102KN2A 1000PF 1KV 10%,-10%SL 270PF 1KV 10%,-10% R/TP TP5
0.47UF SMS,SG(HR) 450V 20% TP 5 FL
0.47UF SMS,SG(HR) 450V 20% TP 5 FL
100UF KME 35V M FL TP5
0.1UF 50V Z F TR
220UF KME 25V M FL TP5
47UF KME 50V M FL TP5
0.1U 100V K POLY TP
470UF MV 16V 20% R/TP(SMD) SMD
A.C 275V 0.47UF K (S=22.5)
A.C 275V 0.47UF K (S=22.5)
A.C 275V 0.47UF K (S=22.5)
2200PF 4KV M E FMTW LEAD 4.5
2200PF 4KV M E FMTW LEAD 4.5
A.C 275V 0.47UF K (S=22.5)
0.82UF D 630V J M/PP NI FM20
0.82UF D 630V J M/PP NI FM20
DE1010 B KD 471M
330UF KMH 450V M VNSN BULK
330UF KMH 450V M VNSN BULK
DE1010 B KD 471M
330UF KMH 450V M VNSN BULK
DEHR33A102KN2A 1000PF 1KV 10%,-10%
CK 2200PF 1KV 10% TR 7.5MM
DEHR33A102KN2A 1000PF 1KV 10%,-10%DEHR33D471KN3A 470PF 2KV 10%,-10%
DEHR33D471KN3A 470PF 2KV 10%,-10%
470UF KME TYPE 25V 20% FL TP 5
A.C 275V 0.47UF K (S=22.5)
A.C 275V 0.15UF K (S=22.5)
CK 2200PF 1KV 10% TR 7.5MM
CK 2200PF 1KV 10% TR 7.5MM
CK 2200PF 1KV 10% TR 7.5MM
CK 2200PF 1KV 10% TR 7.5MM
LOCA. NO PART NO DESCRIPTION
C8331
C8332
C8333
C8336
C8401
C8402
C8404
C8407
C8409
C8410
C8411
C8412
C8414
C8416
C8504
C8506
C8507C8508
C8510
C8511
C8512
C8513
C8514
C8515
C8517
C8518
C8519
C8520
C8521
C8522
C8523
C8524
C8525
C8601
C8602
C8605
C8606
C8607
C8610
C8611
C879
C8802
C8803
C8804
C8805
C8807
C8808
C8811
C8812
C8813
C8815
181-091G
181-120K
181-120K
0CF1050W470
181-091R
0CC47001505
0CC47001505
0CBZVBK001A
0CC47001505
0CQ2231N509
0CE337RV6A0
0CE687RP6A0
0CE227BP650
0CQ1041N509
181-091R
0CBZVBK001B
181-033T0CBZVBK001B
0CC47001505
0CE687RP6A0
0CC47001505
0CC47001505
0CC47001505
0CC47001505
0CE687RP6A0
0CE827RR6A0
0CE827RR6A0
0CE827RR6A0
0CQ1031N509
181-007H
181-120K
0CE476BK618
0CQ4731N509
0CE106WH6DC
0CK104DK56A
0CE106WH6DC
0CE106WH6DC
0CK104DK56A
0CE106WH6DC
0CK104DK56A
0CE107SF6DC
0CE227BK618
0CK8210K515
181-011B
0CK8210K515
181-010P
181-033T
181-007T
0CE478BH650
0CE478BH650
0CE478BH650
DEHR33D471KN3A 470PF 2KV 10%,-10%
2200PF 4KV M E FMTW LEAD 4.5
2200PF 4KV M E FMTW LEAD 4.5
1UF 0 500V 5% BULK M/PP NI
R 1000PF 1KV 10%,-10% R/TP TP5
47PF 1KV K SL TR
47PF 1KV K SL TR
M/PP NI 0.039UF 800V 5% FM 20MM
47PF 1KV K SL TR
0.022U 100V K POLY TP
330UF KMH 450V M VNSN BULK
680UF KMH 160V M VNSN BULK
220UF KME TYPE 160V 20% FM7.5 BULK
0.1U 100V K POLY TP
R 1000PF 1KV 10%,-10% R/TP TP5
0.056UF 800V J M/PP NI FM20
2KV B 222K TP7.50.056UF 800V J M/PP NI FM20
47PF 1KV K SL TR
680UF KMH 160V M VNSN BULK
47PF 1KV K SL TR
47PF 1KV K SL TR
47PF 1KV K SL TR
47PF 1KV K SL TR
680UF KMH 160V M VNSN BULK
820UF KMH 250V M VNSN BULK
820UF KMH 250V M VNSN BULK
820UF KMH 250V M VNSN BULK
0.01U 100V K POLY TP
MPE ECQ-V1H474JL3(TR), 50V 0.47UF J
2200PF 4KV M E FMTW LEAD 4.5
47UF KME 50V M FL TP5
0.047U 100V K POLY TP
10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
10UF MVK 25V 20% R/TP(SMD) SMD
10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
10UF MVK 25V 20% R/TP(SMD) SMD
0.1UF 2012 50V 10% R/TP X7R
100UF MVG 16V M SMD R/TP
220UF KME 50V M FL TP5820P 50V K B TS
0.001UF D 1.6KV J M/PP NI FM20
820P 50V K B TS
PP 0.068UF 630V 5%,-5% FM PP
2KV B 222K TP7.5
MPE ECQ-V1H105JL3(TR), 50V 1.0UF J
4700UF KME 25V M FM7.5 BULK
4700UF KME 25V M FM7.5 BULK
4700UF KME 25V M FM7.5 BULK
REPLACEMENT PARTS LIST
-
8/2/2019 Zenith p60w38 p60w38h Chassis Rf-03la Sm
38/102
- 38 -
LOCA. NO PART NO DESCRIPTION
C8819
C8820
C8821
C8822
C8823
C8824
C8834
C8835
C8836
C8839
C8841
C8842
C8843
C8900
C8901
C8903
C8905C8907
C893
C896
C899
C904
C913
C914
C915
C949
C951
C964
C965
C966
C967
C968
C969
C971
C973
C980
C981
C982
C984
C986
C993
C994
C995
C998
CA203
L1472
L1473
L1474
L413
0CE228EJ61A
0CQ1041N509
0CQ1041N509
0CE108BJ618
0CE108BK61A
0CE108BK61A
0CE228BF618
0CE228BF618
0CE228BF618
0CE228BF618
0CQ1041N509
0CE228BF618
0CE228BF618
0CE107VH6DC
0CE226VF6DC
0CE106SH6DC
0CE107VH6DC0CE336SH6DC
0CE107SF6DC
0CE107SF6DC
0CE476SF6DC
0CE107SF6DC
0CE107SF6DC
0CE107SF6DC
0CE107SF6DC
0CE477VF6DC
0CE477VF6DC
0CE476SF6DC
0CE476SF6DC
0CE107SF6DC
0CE107SF6DC
0CE227VF6DC
0CE227VF6DC
0CE477VF6DC
0CE477VF6DC
0CE107SF6DC
0CE107SF6DC
0CE476SF6DC
0CE227VF6DC
0CE227VF6DC
0CE476SF6DC
0CE107SF6DC
0CE476SF6DC
0CE107SF6DC
0CE476SF6DC
0LC0233002A
0LC0233002A
0LC0233002A
0LCML00005A
2200UF KMG 35V M FL TP 7.5
0.1U 100V K POLY TP
0.1U 100V K POLY TP
1000UF KME 35V M FL TP5
1000UF KME 50V M FL TP7.5
1000UF KME 50V M FL TP7.5
2200UF KME 16V M FL TP5
2200UF KME 16V M FL TP5
2200UF KME 16V M FL TP5
2200UF KME 16V M FL TP5
0.1U 100V K POLY TP
2200UF KME 16V M FL TP5
2200UF KME 16V M FL TP5
100UF MV 25V 20% R/TP(SMD) SMD
22UF MV 16V 20% R/TP(SMD) SMD
10UF MVG 25V M SMD R/TP
100UF MV 25V 20% R/TP(SMD) SMD33UF MVG 25V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
47UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
220UF MV 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
470UF MV 16V 20% R/TP(SMD) SMD
100UF MVG 16V M SMD R/TP
100UF MVG 16V M SMD R/TP
47UF MVG 16V M SMD R/TP
220UF MV 16V 20% R/TP(SMD) SMD
220UF MV 16V 20% R