ZEBRA HC100 Quick Fix Guide - dal.com.au … · b) Eject cartridge. c) Check through side window...
1
This page has been designed to help HC100 users get the most from their printer and assist in training new users. Misfeeds are rare, but here are 2 symptoms reported by users along with recommended resoluons. b) Orange light flashing. c) DO NOT try and pull wristband from printer. Eject cartridge. Using scissors, cut protruding part of wristband close to the edge of the cartridge. d) Re-insert cartridge and wristband should feed out and printer will reset. Probable Cause: Wristband has been manually pulled from cartridge or printer before prinng has finished. Zebra HC100 Quick Fix Guide www.dal.com.au Tel: (03) 9764 2882 a b c d b) Eject cartridge. c) Check through side window that cartridge sll contains wristbands. d) Turn cartridge upside down. If wristband is not visible, replace cartridge. Probable Cause: Wristband has been manually pulled from cartridge or printer before prinng has finished. a b c a) Problem — Wristband parally fed out from printer. a) Problem — Wristband fails to feed. Orange light flashing. d
Transcript of ZEBRA HC100 Quick Fix Guide - dal.com.au … · b) Eject cartridge. c) Check through side window...
This page has been designed to help HC100 users get the most from their printer and assist in training new users. Misfeeds are rare, but here are 2 symptoms reported by users along with recommended resolutions.
b) Orange light flashing.c) DO NOT try and pull wristband from printer. Eject cartridge. Using scissors, cut protruding part of wristband close to the edge of the cartridge.d) Re-insert cartridge and wristband should feed out and printer will reset.Probable Cause:Wristband has been manually pulled from cartridge or printer before printing has finished.
Zebra HC100 Quick Fix Guide
www.dal.com.au Tel: (03) 9764 2882
a b c d
b) Eject cartridge.c) Check through side window that cartridge still contains wristbands.d) Turn cartridge upside down. If wristband is not visible, replace cartridge.Probable Cause:Wristband has been manually pulled from cartridge or printer before printing has finished.
a b c
a) Problem — Wristband partially fed out from printer.
a) Problem — Wristband fails to feed. Orange light flashing.
d
