Z-Line Shelving System

SYSTEMS FOR SUCCESS

All Tennsco Z-Line Shelving is painted with a tough,long lasting, enamel finish to ensure years of lastingbeauty. Choose from three standard finishes.

Finishes shown above are only representative of theactual finishes. If greater accuracy is required contactyour local Tennsco dealer for additional information.

A WORD ABOUT TENNSCOTennsco Corp., headquartered in Dickson, Tennessee,began operations in 1962. Today, Tennsco is anindustry leader with over 1.4 million square feet ofmanufacturing and warehouse space in six facilities.Tennsco offers a wide variety of filing and storagesystems, steel office furniture, industrial andinstitutional shelving, lockers and shop equipment.

For additional information on other Tennsco products,contact:

Medium GreyLight Grey

Sand

© Tennsco 2005 LMI 6/05 25M

Mailing Address: Shipping Address:P.O. Box 1888 201 Tennsco DriveDickson, TN 37056-1888 Dickson, TN 37055

Toll Free Customer Service: (866) 446-8686 • Fax (866) 445-7260Toll Free Ordering: (866) 864-4796

(615) 446-8000 • (800) 251-8184 • Fax (800) 722-0134www.tennsco.com • info@tennsco.com

SYSTEMS FOR SUCCESS

2

Tall, Upright PostsUpright posts are availablein lengths up to 181½".

Structural IntegrityPositive rivet connectioncombines with 14 gaugeangle post to make a rigidframework ideal formezzanine or high densitymobile shelving.

Strong, Economical ShelvesIndustrial grade particleboard shelves hold up tothe toughest applications— at an affordable price.

Added ReinforcementHandle extra heavy loadswith extra center support.

Low Profile Shelf SupportMaximize shelf openingswith thin but strongshelf supports.

Easy AssemblyTwo way keyhole slots andsnap-in rivet design makeinstallation a snap. Noclips, sway braces, cornergussets or additionalhardware needed.

Strength WithoutCompromiseStandard 14 gauge doublerivet beam has 2¾" profileand handles loads up to2000 lbs. Or choose ouroptional 3¼" profilechannel beam for evengreater load capacity.

Long SpansConfigure units up to 96"wide by 60" deep withZ-Line’s channel beams.

Flexible DesignShelves adjust in1½" increments foroptimum flexibility.

Z-Line Shelving

VDRS Shelf SupportMaximize shelf openingswith thin but strongshelf supports.

5

Z-Line Shelving Z-Line ShelvingLow Profile Shelving Unit

Medium Profile Shelving Unit

Tennsco Low Profile Shelving Units are yoursolution when you need to maximize verticalstorage space and need unobstructed accessto stored items. The specially designed shelfsupports with particle board are only 11/8"tall yet handle load capacities from 600-800 lbsdepending upon the steel-gauge and shelf sizeyou select. Widths available up to 48".

Tennsco Medium Profile Shelving Units incorp-orate a special 21/4" high v-beam design offeringheavy-duty support at an economical price. Withthe added load capacity you’ll find hundreds ofuses in your factory or warehouse. Shelf supportsare available in either 16 or 14 gauge steel tohandle shelf load capacities ranging from 600to 1,000 lbs. depending upon the gauge andshelf size selected. Widths available up to 72".

SYSTEMS FOR SUCCESS

Wide Profile Shelving Unit

Channel Beam Shelving Unit

The 2¾" high steel beam of Tennsco's Wide ProfileShelving Unit supports applications where deckingis used over longer spans. Whether your applica-tion involves wire decking or particle board, WideProfile Shelving Units can handle your mostdemanding storage need. Weight capacities rangefrom 1,250 lbs. to 2,500 lbs. dependingupon shelf size. Widths available up to 96".

Tennsco Channel Beam Shelving Units are your answerto industrial strength storage applications. The 3¼" highsteel channel beam offers maximum strength for shelfspans of 48" and longer. Load capacities range from1,600 lbs. to 2,500 lbs., depending upon shelf size.Widths available up to 96".

3

Z-LineShelving

When it comes to valuewithout compromisingperformance, you’re talkingabout Z-Line shelving. Itsfastening mechanismcombined with a versatilearray of components meansit fits all your storage needs.The interlocking keyholedesign not only makesinstallation fast and easybut eliminates the need forclips, gussets, sway bracesor other hardware necessarywith conventional shelving.Without these obstacles youhave completely free accessfrom all sides of the unit.

Z-Line’s adaptabilitymakes it ideal for any sizestorage requirement. Itsinterchangeablecomponentry means it canbe configured for singlewidth shelving applicationsor spans up to 96" wide.It’s a multifaceted systemthat affordably solves allyour storage needs.

The Universal Storage SolutionStandardize your storagesolutions throughout yourorganization by using Z-Line’sinterchangeable components foreither your heavy-dutyapplications or where totalweight requirements arenot as demanding.

Unobstructed AccessibilityBecause the Z-Line designeliminates structural bracing,items can be loaded andunloaded from either the side,front or back of the unit formaximum versatility.

Easy AssemblyAssembly goes smoothlyand quickly with Z-Line’ssnap-in rivet and keyholedesign that eliminates theneed for fasteners or braces.

Exceptional StrengthDouble rivet design andkeyhole slots form a rigidframework. Combine heavygauge steel posts, shelf supportsand angle beams and youhave a shelving systemthat easily stands up toany industrial application.

SYSTEMS FOR SUCCESS

6 7

Z-Line Versatility Z-Line Versatility

Handles Your Toughest Loads

Steel sides, backs and locking doorssecure your stored items while keepingcontaminants, dust, etc. out.

Unlike other shelving offerings, Z-Line is designed tohandle loads up to 2,500 lbs. per shelf. Plus it takesthe tough handling found in warehouses or industrialstorage areas.

Z-Line is ideal for handling archivedoffice materials like accounting records,computer printouts, etc. Use standardparticleboard shelves, or choose anglebox supports (shown above).

Adjustable shelves and easy to assemble modular design allowsyou the flexibility to configure Z-Line shelving to meet yourstorage requirements.

Conveniently stores tires for easyaccess and display. Vertical storageallows for maximization of availablefloor space. Available in a single ordouble entry unit.

Versatile Storage Options Enclosed Storage

Z-Line is one of the mostflexible and affordableshelving systems available.Use your imagination increating not only custom-ized storage but also workstations, equipment stands,shipping stations, cuttingtables, tire racks, hangracks and more.

Retail Storage & Display

SYSTEMS FOR SUCCESS

Tire Rack

Archive & Box Storage

Stores items at an angle for easier viewing and retrievalof products on display.

Sloping Shelves

Interlocking keyholeslot design allows easyassembly with only arubber mallet.

Full-length drawers glideeffortlessly on progressivesteel ball-bearingsuspensions whileparticleboard bottomsprovide a 150 lb.capacity per drawer.

Pegboard back acceptsstandard hanging hooks(not included) to keeptools close at hand.

Accessable storage iswithin reach. Reversibleriser shelf holds upto 750 lbs. (evenlydistributed)

8 9

Stur-D-Stor

Create your choice of workbenches as shown above. Stur-D-Bench's boltless design allows quick and easy set-up. Industrial grade particle board shelves with steel frames offer 1,000 lb. capacity per shelf. Shelves adjustin 1/2" increments. Depending on your application, choose between a full-width drawer unit with 60" riser,60" drawer and 60" lower shelf or a half-width drawer unit with a 60" riser, 30" drawer, and 30" lower shelf.Available in Accent Blue paint finish only.

Stur-D-Bench

Stur-D-Bench

Features

Boltless AssemblyAssembly of Stur-D-Stor is quickand easy thanks to its no nuts orbolts design.

Modular DesignStur-D-Stor can be configured aseither a freestanding shelf unit oras a compact work table.

Built StrongIndustrial grade particle boardshelves combined with ruggedsteel angle components meansthat Stur-D-Stor shelving isbuilt to last.

Features

Flexible shelving components create a five-shelf unit or handy work table. Stur-D-Stor's boltless design allowsquick and easy set-up. Industrial grade particle board shelves with steel frames offer 1,000 lb. capacity pershelf. Shelves adjust in 1/2" increments.

Stur-D-Stor

SYSTEMS FOR SUCCESS

11

Steel Shelf Units

Special units with angle supports allow recordstorage boxes to slide in and out of individualchannels for complete organization. Availablein a single or double entry unit.

Record Archive with Angle Supports

Rack designed to hold record storage boxesfor archival purposes. May be ordered withor without particle board decking to allowyou to use your own shelf surface.

Record Archive Units

10

Using Z-Line with MezzaninesZ-Line can be expanded tomezzanine storage for even moreefficient storage. Send us yourrequirements and we’ll customdesign a system perfectly suitedto your specific needs.

Record ArchiveSteel Shelf Starter Units

Easy AccessTennsco's steel shelvingsolution allows you togain entry from bothsides of the unit. Nosway braces to get inthe way!

Metal ShelvingIn places where excessivehumidity or fire codes arean issue, metal shelvingholds up where othershelving may fall short.

Boltless AssemblyAssembly of steel shelvesis made easier, requiringno nuts or bolts.

Load CapacitySteel shelf units handleyour heavy loads withcapacity ratings upto 750 lbs. per shelfdepending on size andconfiguration of shelves.

Sturdy steel framework combined with strong steel shelving provides a strong yet cost-effective solutionto a wide range of storage requirements. Steel shelf clips attached to the uprights provide rigid and strongconnection points for the steel shelves, removing the need for sway braces and allowing for unobstructedaccess from all four sides. Shelves on both Starter and Adder units can be adjusted on 11/2" increments.Available widths are 36", 42", and 48". Shelf depths are 12", 18", 24" and 36" to suite your specific needs.Note: Medium shelf supports are required to stabilize the unit at top and bottom.

Features

SYSTEMS FOR SUCCESS

SYSTEMS FOR SUCCESS

Z-Line Components Z-Line Accessories

Front to Back Shelf Deck SupportFor added support for decking on long spans. Usedwith wide profile shelf supports and Channel Beams.

Medium Profile Front to Back Shelf SupportsAdded support on long spans of medium profile shelfsupports. Snap-in design for easy installation.

Cross Aisle TiesCross aisle ties stabalize rows of shelvingby tying them together across the aisle.

Adjustable Aisle TiesLinks units across an aisle in distancesfrom 48" to 84"

Shelf Support Options

Shelf Tie Options

12 13

Tie and Anchor PlatesConnect two units back-to-back orside-to-side while maintainingspacing for rivet head clearance.

Wall TieConnects a unit to the wall witha 9" spacing. Provides additionalstability for tall units.

Post Splice AngleSplices two uprightposts together.

Connectors

Other Options

DoorsSturdy doors keep outdust and debris whilealso providing a finishedlook.

Sides and BacksSturdy sides and backskeep out dust and debriswhile also providing afinished look.

Hang RodsAllows shelving tobe used as a retailclothes rack.

Nylon End CapsProtect the ends of yourshelf uprights with thesedurable nylon endcaps.

SURHeavy Upright Post

Post OptionsMatch posts with your needs:Use SUR posts for your mostdemanding applications. UseEUR for light or medium weightapplications and in conjunctionwith ZTP posts. Use ZTP as anintermediate common “T” post.

EURStandard Upright Post

ZTPIntermediate UprightPost

Particle Board DeckingIndustrial grade 5/8" particle board decking provides asturdy work surface that is both strong and economical.

Wire DeckingSelect wire decking for better visibility of items.Meets Factory Mutual fire codes.

Post Options

Support Options

Shelf Options

Medium Profile Support OptionsSpecial V-beam design provides heavy-duty supportat an economical price. Available in 16 or 14 gaugesteel. Load capacities range from 600 to 1,000 lbs.,depending upon steel gauge and shelf size.

Channel BeamsExtra heavy-duty 3¼" high beam for maximum strength.Supports spans 48" and longer. Load capacities rangefrom 1,600 lbs. to 2,500 lbs., depending uponshelf size.

Low Profile Support OptionsMaximizes shelf openings in light to medium dutysupport applications. Available in 14 or 11 gaugesteel. Load capacities range from 600 to 800 lbs.,depending upon steel gauge and shelf size.

Wide Profile Shelf SupportsHeavy-duty 2¾" high beam to laterally supportdecking in longer spans. For load capacitiesranging from 1,250 lbs. to 2,500 lbs., dependingupon shelf size.