Yzf r1 07 Assembly Full

8/9/2019 Yzf r1 07 Assembly Full

1/20

Thank you for downloading the "YZF-R1"paper craft model. By simply

following this manual while referring to the names and numbers shown

on the parts sheets, you can assemble an authentic-looking replica of

the YZF-R1.


2/20


3/20

Glue in order from to on the graphic.


4/20



*Assemble both sides. The diagramshows the left side. The number inside

the ( ) is for the right side.


5/20


DO NOT glue the upper and the lower partsof the steering column at this stage.


6/20



7/20


8/20



9/20


10/20


11/20



12/20


* Do not paste J-48 & J-49.

* Do not paste K-2 & K-8.

* Do not paste K-1 & K-7.


13/20

* Do not paste L-39 & L-48.




* Do not paste L-38 & L-41,46.


*Assemble both sides. The diagramshows the left side. The number inside

the ( ) is for the right side.


14/20




15/20



16/20



17/20

Glue the radiator to the engine.

Glue the engine to the frame 1.

Glue the rear arm to the frame 1.

Glue the rear suspension 1 to the frame 1.

Glue the rear suspension 2 to the frame 1.

Glue the taillight to the seat cowl.

Glue the exhaust pipes 3 to the seat cowl.

Glue the seat cowl to the frame 2.

Glue the tank to the frame 2.

Glue the frame 2 to the frame 1.

Glue the exhaust pipes 1 to the engine.

Glue the meter to the frame 1.

Glue the under cowl to the frame 1.

Glue the front cowl to the under cowl.

Glue the brake caliper to the front tire.

Glue the front tire to the lower steering column.

Glue the front fender to the lower steering column.

Glue the rear tire to the rear arm.

Glue the left footrests to the frame 1.

Glue the right footrests to the frame 1.

Insert exhaust pipes 2 into exhaust pipes 1 and 3.

Put the lower part of the steering through the frame andglue it to the upper part of the steering.

Connect each of the previously assembled parts in

order from - according to the diagram.


18/20


19/20


20/20

Yzf r1 07 Assembly Full

Documents

Transcript of Yzf r1 07 Assembly Full