Your Partner for reliable closure technique in laboratories - LABO - SK
Transcript of Your Partner for reliable closure technique in laboratories - LABO - SK
La-P
ha-P
ack®
Wer
ner
Reiff
ersc
heid
t Gm
bH 2
006
Am Parir 20 . D-52379 Langerwehe P.O. Box 1120 . D-52373 LangerweheTel.: +49 (0) 24 23 / 94 31-0Fax: +49 (0) 24 23 / 94 31-33Internet: www.la-pha-pack.comE-Mail: [email protected]
Your Partner for reliable closure technique in laboratories
La-Pha-Pack® Werner Reifferscheidt GmbH . P.O. Box 1120 . D-52373 Langerwehe . www.la-pha-pack.comTel.: +49 (0) 24 23 / 94 31-0 . Fax: +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Represented by:
Your Partner for reliable
10ml + 20ml Precision ThreadVials with Magnetic Screw Seals
(8mm centre hole/closed top)
TPX Short Thread Vials ND9 or Snap Ring Vials ND11 with
Glass Micro-Insert (clear/amber)
Screw Neck Vials with different volumes in clear and amber glass
for storage purposes
Vial Racks for Crimp Neck Vials ND8, for all 2ml, 4ml and
Headspace Vials
1.5ml Polypropylene Short Thread Vialswith filling lines
(transparent/amber)
ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
10ml + 20ml amber Headspace Vials for different Autosampler
SilanizedShort Thread Vials ND9
and Micro-Inserts/TopSert TM
8mm + 11mm PE Push-On Capswith thinned penetration point
PLUS
Dear Customer!
You are a valued partner of ours. In case the catalogue does not answer your questions sufficiently, please contact us either
by phone: +49 (0) 24 23 / 94 31-0 by fax: +49 (0) 24 23 / 94 31-33 or by E-Mail: [email protected]
Furthermore you are also always welcome to visit us either virtually under www.la-pha-pack.com
or personally in our plant.
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
1
Preface ......................................................................� 4 How to find the right product Handling of the catalogue Article Number System Contacts General terms and conditions General organisational matters Others
Company Profile ...............................................� 7
Technical Information ................................� 12 Vials Seals Septa
1. Crimp Neck ND8 ................................� 16 1.1 Crimp Neck Vials and Micro-Vials ND8 1.2 Aluminium Crimp Seals ND8 1.2.1 Natural Rubber/TEF Seals 1.2.2 Silicone/PTFE Seals 1.2.3 Other Crimp Seals 1.3 Other Combination Seals for Crimp Neck ND8
2. Screw Neck ND8 ...............................� 18 2.1 Screw Neck Vials ND8, small opening, 8-425 thread, and Micro-Vials ND8 2.2 Micro-Inserts for Vials with small opening 2.3 PP Screw Seals ND8 2.3.1 Natural Rubber/TEF and Butyl/PTFE Seals 2.3.2 Silicone/PTFE Seals 2.4 Septa 8mm 2.5 PP Screw Caps ND8 2.6 Special 2in1 KITs
3. Short Thread ND9 .............................� 21 3.1 Short Thread Vials ND9, wide opening, and appropriate Micro-Inserts 3.2 Micro-Vials with Short Thread ND9 3.3 Silanized Products 3.4 PP Short Thread Seals ND9 3.4.1 With transparent Cap 3.4.2 With blue Cap 3.4.3 With red Cap 3.4.4 With black Cap 3.4.5 UltraBondTM Seals ND9 3.5 Special 2in1 KITs
4. Screw Neck ND10 .............................� 24 4.1 Screw Neck Vials ND10, wide opening, 10-425 thread, and appropriate Micro-Inserts 4.2 PP Screw Seals ND10 4.3 Septa 10mm 4.4 PP Screw Caps ND10
Content Chapter Page
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
2
5. Crimp Neck ND11 .............................� 25 5.1 Crimp Neck Vials ND11, wide opening, and appropriate Micro-Inserts 5.2 Micro-Vials with Crimp Neck ND11 5.3 Other Crimp Neck Vials ND11 5.4 Aluminium Crimp Seals ND11 5.4.1 Natural Rubber/TEF Seals 5.4.2 Silicone/PTFE Seals 5.4.3 Other Crimp Seals 5.5 Magnetic Crimp Seals ND11 (for CTC PAL + TriPlus Autosampler) 5.6 Other Combination Seals for Crimp Neck ND11 5.7 Septa 11mm
6. Snap Ring ND11 .................................� 28 6.1 Snap Ring Vials ND11, wide opening, and appropriate Micro-Inserts 6.2 Micro-Vials with Snap Ring ND11 6.3 PE Snap Ring Seals ND11 6.3.1 With transparent Cap 6.3.2 With blue Cap 6.3.3 With red Cap 6.4 Other Combination Seals for Snap Ring ND11
7. Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11 ....................................................................30 7.1 Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11 7.2 Seals for Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11 7.3 Special 2in1 KITs
8. Screw Neck ND13 .............................� 31 8.1 Screw Neck Vials ND13 and appropriate Micro-Inserts 8.2 PP Screw Seals ND13 8.3 Septa 12mm 8.4 PP Screw Caps ND13 8.5 Special 2in1 KITs
9. Shell Vials ..... ...........................................� 33 9.1 Shell Vials 1ml and 4ml and appropriate Micro-Inserts 9.2 Shell Vials 2ml and appropriate Micro-Inserts 9.3 Special 2in1 KITs
10. Headspace ND20 (ND18) ...........� 35 10.1 Headspace Vials ND20 + ND18 10.2 Other Crimp Neck Vials ND20 10.3 Aluminium Crimp Seals ND20 10.3.1 Butyl Seals 10.3.2 Butyl/PTFE Seals (completely PTFE laminated) 10.3.3 Pharma-Fix Seals (Butyl/PTFE) 10.3.4 Silicone/PTFE Seals (completely PTFE laminated) 10.3.5 Pharma-Fix Seals (Silicone/PTFE) 10.3.6 Silicone Aluminium Foil Seals 10.3.7 Magnetic Seals for SPME-Vial 20 09 1222 for CTC + TriPlus 10.4 Septa / Stoppers 20mm 10.5 Other Combination Seals for HS-Neck / Crimp Neck ND20 10.5.1 Septa 19.5mm 10.5.2 PE-Caps 22mm 10.6 PP Screw Seals ND18 for 18 09 0864 10.6.1 Septa 16mm 10.6.2 PP Screw Caps ND18 10.7 Universal Magnetic Screw Seals ND18 for Precision Thread Vials 18 09 1306, 18 09 1310, 18 09 1307, 18 09 1311 for CTC + TriPlus 10.8 Universal Screw Seals ND18, closed top, for Precision Thread Vials 18 09 1306, 18 09 1310, 18 09 1307, 18 09 1311
11. Snap Cap Vials ND18 + ND22 ...............................................................................................................................41 11.1 Snap Cap Vials ND18 / ND22 and appropriate Snap Caps
Content Chapter Page
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
3
12. Screw Neck ND24 (EPA) ..............� 42 12.1 Screw Neck Vials ND24 (EPA) 12.2 PP Screw Seals ND24 12.2.1 PP Screw Seals ND24 (assembled) 12.2.2 UltraBondTM Seals ND24 12.3 Septa 22mm 12.4 PP Screw Caps ND24 12.5 Specially assembled EPA Vials with Seals ND24
13. 96 Position Block Systems .........� 44 13.1 96 Position Block Systems with Glass Inserts, sealed individually 13.2 96 Position Block Systems with Glass Inserts, sealed with a Sealmat TM Block Cover
14. ProFill TM HPLC Syringe Filters and ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter .............� 47 14.1 ProFill TM HPLC Syringe Filters 14.2 ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
15. GC Injection Port Septa ................� 49
16. GC Capillary Connectors .............� 49
17. Crimping Tools .....................................� 50 17.1 Manual Crimping Tools 17.2 Manual Decapping Tools 17.3 Pneumatic Hand-held Crimping Tool 17.4 Crimping Heads for Pneumatic Hand-held Crimping Tool 17.5 Decapping Heads for Pneumatic Hand-held Crimping Tool
18. Other Accessories or Special Services .............................................................................................................52 18.1 Vial Racks 18.2 Special Services
19. Screw Neck Vials for Storage Purposes .........................................................................................................54
20. Special Products .................................� 55 20.1 Special Vials 20.2 Special Seals 20.2.1 Crimp Seals ND13 20.3 Special Septa 20.3.1 Septa for SCHOTT Screw Caps 20.3.2 Septa 13mm
Trademarks, Abbreviations, Explanations, Structure Article Descriptions .....................................57
Alphabetical Index .......................................� 60
Numerical Index .........................................� 61
Annex of Numerical Index ....................� 62
Quick-Reference-Charts ...........................� 63 AGILENT – CTC – DIONEX – PERKIN ELMER – SHIMADZU – SPARK – VARIAN – VWR (Merck®)/HITACHI – WATERS® – THERMO
Autosampler Compatibility Chart ....� 68
Cross-Reference-Charts ............................� 76 CHROMACOL – CRS – FINNERAN – KIMBLE KONTES – NATIONAL SCIENTIFIC – SUN / SRI INTERNATIONAL – WHEATON
Overview on 1:1 Drawings of all Standard Vials / Drawings of Caps ...........................................83
Content Chapter Page
4
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Pref
ace
Dear Customer!
The new edition of our product catalogue was further optimized, in order to facilitate your daily work when searching the right consumables. On the following pages you will find some recommendations, how to use our catalogue and other resources best to supply your customers with La-Pha-Pack® products.
We have maintained the approved structure of our pre-vious catalogue. Within the product groups new articles have been complemented and marked accordingly. The structural composition of our catalogue is explained on page 5 – handling of the catalogue.
Please note that the catalogue only contains our stan-dard products which, of course, are stock items. Far more products can be obtained from us, so that it is always worthwhile to contact us, in case you don’t find the product of your choice in the catalogue.
We hope that the improved catalogue will be a useful guide for you in always finding the right La-Pha-Pack® product for your demand. We would like to point out that information on any new products that will be launched after the catalogue’s print date, can be taken from our website at www.la-pha-pack.com, icon “Innovations”.
We would like to point out explicitly out that our policy prohibits supplying end-users. However, everybody is welcome to ask for technical advice or samples. Enquir-ies or orders from consumers have to be placed at local dealers or can be forwarded by us to a distributor of ours.
In case of any further questions or sample requests you are always welcome to contact us.
Your LA-PHA-PACK Team
5
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Pref
ace
a) Each chapter includes all products that belong together, i.e. Vials (e.g. all types of Short Thread Vials or Micro-Vials), suitable Micro-Inserts for these Vials, appropriate Seals for these Vials (e.g. all types of Short Thread Seals) and – if available – individual Septa/Caps.
b) The catalogue starts with the vials that have the smallest nominal diameter, continuing with increas-ing nominal diameter. Other accessories like Vial Racks, Syringe Filters, GC-Septa can be found more towards the end of the catalogue.
c) All kind of listings (Trademarks, Alphabetical Index, Numerical Index, Annex of Numerical Index, Quick-Reference-Charts, Autosampler Compatibilities, Cross-References, Actual Size Drawings of all stand-ard glass articles, Drawings of caps etc.) can be found at the very end of the catalogue.
d) A short company profile is included in the preface and can be taken from our website under
www.la-pha-pack.com (subchapter “Company”).
How to find the right product
Handling of the catalogue
Article Number SystemOur 8 digital article number comprises the following indications:
8mm Polypropylene Screw Cap black, 5.5mm centre hole
08 08 0027Diameter in mm Sequential Number
Article Group(08=Plastic Caps,
no liner)
a) You know the manufacturer/model of your cus-tomer´s instrument/autosampler
Go to the Autosampler Compatibility Chart on page 68 to 75 of the catalogue and look for suitable vials. The chapter und page indications will lead you to the appropriate vials. Suitable Micro-Inserts, Seals, Septa and Caps for these vials will follow in the subsequent chapters! In case you don’t find the model in the Autosampler Compatibility Chart, please contact us. In our library we have even more information on vial suitability for the various instruments on the market.
In addition to our general Autosampler Compati- bility Chart you find on page 63 to 67 our new Quick-Reference-Charts with suitable consumables for the following instrument companies: AGILENT – CTC – DIONEX – PERKIN ELMER – SHIMADZU – SPARK – VARIAN – VWR (Merck®)/HITACHI – WATERS® – THERMO. In our new Quick-Reference-Charts you find, complementary to suitable vials, also a recommendation for typically used Seals and Micro-Inserts. The chapter and page indica-tions lead you to the corresponding chapters, where you find further consumables.
b) You have a sample from your customer of the vial requested
Go to the actual size drawings at the end of the catalogue and look for identical vials. The chapter indication will lead you to the appropriate vials.
Suitable Micro-Inserts, Seals, Septa and Caps for these vials will follow in the subsequent chapters!
Send the sample to us for evaluation and we will identify the correct La-Pha-Pack® product.
In return we will provide you with some samples of the La-Pha-Pack® product for your customer to evaluate.
c) You know the diameter of your customer’s septa, vial, seal, etc.
The first two digits of our article numbers are indi-cations of the diameter. Go to the Numerical Index on page 61 and look for articles starting with the digits of your diameter. The 3rd and 4th digits are indications of the article group, e.g. 09 for vials, 02 for septa, etc. (List of our article groups can be taken from the Annex of the Numerical Index).
d) You know a key description of your customer’s requested product
Go to the Alphabetical Index on page 60 and look, if the key description is included there.
e) You find a listing of cross-reference numbers listed by various competitors on page 76 to 81. In case you are not be able to identify a cross-reference number, please contact us any time. In our library further information regarding competitors’ article numbers are available.
6
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Pref
ace
Contacts
Customer Service (for quotations, sample requests, tech- nical advice, etc.): Telephone: +49 (0) 24 23 / 94 31-0 +49 (0) 24 23 / 94 31-12 +49 (0) 24 23 / 94 31-18 +49 (0) 24 23 / 94 31-19 +49 (0) 24 23 / 94 31-29 Telefax: +49 (0) 24 23 / 94 31-33 E-Mail: [email protected]
Order Processing (for orders, delivery times of open orders, etc.): Telephone: +49 (0) 24 23 / 94 31-11 +49 (0) 24 23 / 94 31-17 +49 (0) 24 23 / 94 31-19 Telefax: +49 (0) 24 23 / 94 31-33 E-Mail: [email protected]
Accounts department (for payments, reminders, etc.): Telephone: +49 (0) 24 23 / 94 31-14 Telefax: +49 (0) 24 23 / 94 31-44 E-Mail: [email protected]
(If you know the name of your direct contact person, you can reach him/her under: “first letter of firstname”.“surname”@la-pha-pack.com)
Internet: www.la-pha-pack.com
Office hours:Monday until Friday: 8.00 am to 16.30 pm
General terms and conditions
All orders are based on our general terms and condi-tions which can be sent to you upon request or can be taken from our website under www.la-pha-pack.com, icon “Imprint”. At this point we would like to draw your attention to the following facts:
Minimum delivery quantities: Vials, Seals, Septa: 1,000 pieces Filters: 100 pieces GC Injection Port Septa: 25 pieces Capillary Connectors: 10 pieces (for Connectors for 2 columns)
1 piece (for Connectors for 3 columns)
Crimpers/Decappers: 1 pieces 2in1 KITs: 10 pieces
Vial Racks: 1 piece
The minimum order quantities are independent from the packaging units indicated underneath all products. Minimum order value: 250.00 EURO Our goods are excluded from exchange, legal regula-tions remain unaffected hereof.
Others
There are no prices included in our catalogue nor sepa-rate price lists available. Prices are calculated individu-ally, depending on order quantities. We are prepared to submit special offers for annual call-off orders, as we can take the total delivery quantity and number of call-off deliveries into consideration.
In case of orders for special products that are not included in our standard delivery programme we kindly ask you to pay attention to the fact that these orders can only be carried out after release of samples, drawings or specifications.
Furthermore we would like to point out that ordered quantities for special articles on customers’ request will be adhered to in principle, however, deliveries can either be up to 10 per cent higher or lower than the original quantity.
General organisational matters
All standard items are stock items that usually can be despatched within 24 hours after receipt of order. All products are kept absolutely neutral, i.e. no La-Pha-Pack® article numbers are printed or labelled on the packaging of the products.
As we only supply wholesalers or dealers who promote our products as their own brands, we strictly keep up a policy of neutral packaging. Only batch numbers for reasons of traceability in cases of complaint are attached to the product. For the vials additionally a small schematic drawing of the product is labelled on the front side of the PP-Box to enable identification of the content. Customer specific labelling can be carried out against a small surcharge.
We want that consumers of our products are satisfied with them. Therefore everybody is welcome to ask for cost-free samples for testing purposes to evaluate the most appropriate product for his instrument/application with regard to technical suitability, convenience in han-dling and price-performance ratio. This way you have the opportunity to see and decide before placing an order which product suits best your individual needs.
7
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
La-Pha-Pack® offer a complete range of consumables for GC, HPLC and Headspace analysis, comprising vials, septa, seals, filters, crimpers, etc. Besides all standard items for almost all common instruments in the chro-matography market, La-Pha-Pack® also carry out special production runs of vials, septa and combination seals according to customer’s specifica-tions.
The products are sold worldwide through a network of distributors. The products are of high quality and have been thoroughly tested before their launch. As a DIN EN ISO 9001:2000 certified company we devoted ourselves to complete customer satisfaction which we defined as our busi-ness policy as follows:
. to supply continuously high quality products. to offer optimal economy. to grant consequent deadlines. to develop innovative and market-orientated products. to support promptly and efficiently our customers in all respects they may require
Special Product Features
La-Pha-Pack® are the only supplier of chromatography vials from a cleanroom class 10,000. With the CleanPack label on the box we guarantee this high hygienic standard. Additionally, tamper-evidence is given by the shrink-wrapping of the bottom part of the PP-box, whereas its cover enables recloseability at any time during consumption, in order to avoid any later contamination of the vials during usage.
The zip-lock PE-bags with the tear-off foil strip for our seals follow the same prin-ciples of the vial packaging with regard to tamper-evidence and recloseability. An additional product safety is given through the automatic counting and packag-ing process, as quantity obedience can be guaranteed and any contamination through human touch – as it would happen when weighing the parts by hand – is excluded. Printed batch numbers on each zip-lock bag grant traceability.
Production
Vials, septa and seals are manufactured with high-sophisticated produc-tion technology out of high quality raw materials under strict hygienic standards.
The vials are almost all made out of SCHOTT glass tubing of 1st hydrolytic class. Opto-electronical devices on the glass machines measure within parts of a second, whether the manufactured vial meets the specifica-tions. In case of mismatch, the vial is blown out into the trash. Besides this 100 per cent control, manual in-process controls and a final inspection according to DIN/ISO standards grant further product safety. The pack-aging of the vials in a cleanroom class 10,000 is a new hygienic stand-ard for chromatography which ensures a correct and reliable analysis.
Com
pany
Pro
file
Company Profile
8
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Production
PTFE laminated liners made of Butyl, Natural Rubber or Silicone are normally punched in high performance automatic punching presses out of endless roll material. First of all the roll is cutted to the size of the punching die (= number of punches per die) on a rubber cutting machine. An inspection of the roll with regard to visual defects as well as an automatic control of the material thickness is carried out here as well. The cus-tomized roll is then rolled onto stainless steel coils which afterwards feed the material into the punching presses.The precision dies for the automatic punching press are designed in that way that they operate without any punching agents or lubricants. This as well as the complete cove-rage of the punching area are important for a contamination-free septa production. The precision dies guarantee proper cutting edges and an exact round, reproducable diameter within tightest tolerances. A sensor system recognizes joints and defect parts in the roll and separates scrap through an automatic sorting shutter system. A closed tunnel system as well as stainless steel collecting boxes ensure a maximum of hygiene for the ready punched septas before a further processing in the automatic assembly machines. Besides high productivity and excellent raw material usage the high perfor-mance automatic punching presses offer outstanding dimensional stability as well as a continuous high quality.The closures are fully automatically assembled. Several photocells check at different levels of the assembly process the side-orientation of the liner, so that it is guaranteed that the PTFE lamination is always directed towards the sample. A gauge checks at the end of the assembly process that not more or less than one liner is installed. The auto-matic assembly of the liner ensures that no human skin fat or sweat can contaminate the seal, as it would be in case of manual assembly. Special production runs either on the septa side or for completely assembled seals can be carried out according to customer’s specification. Also special packaging (different packaging units, additional printed labels, etc.) can be requested.Assembly of the closures and automatic counting and packaging are carried out in an uncertified clean room, i.e. no wooden pallets or cardboard are allowed there, every-body has to wear special clothing, most parts of the machines are under a glass cabinet, etc. Besides the sensor-controls at the machines additional in-process controls through the operating personnel ensure further product safety. All controls are documented on the assembly form as well as all essential data about the manufacturing process.
Quality
All products are only produced of high quality raw materials. Besides opto-electroni-cal quality controls during the manufacturing process, in-process controls and final QC inspections according to DIN/ISO standard ensure safe and reliable products for chromatography usage. All quality controls are documented and appropriate reports can be requested any time as well as certificates of compliance. Batch numbers on all products guarantee a 100 per cent traceability. Upon special request certificates of cleanliness can be obtained for the EPA Screw Neck Vials respectively GC chroma-tograms are available for our UltraCleanTM Silicone/PTFE seals. For better illustration of the various obtainable quality documents, you will find demo certificates on our website www.la-pha-pack.com under ”technical information”.
Service
Hugh stocks guarantee that standard items can be despatched within 24 hours. Upon request also direct deliveries can be carried out as well as customer specific labelling. Annual call-off orders can be stocked for our customers.Furthermore La-Pha-Pack® support their customers with technical advice with regard to auto- sampler compatibility, cross references, or application specific questions. Product trainings can be offered locally or in our company. Cost-free samples can be put at the customer’s disposal for evaluation. On the marketing side we can provide you with product photo-graphs, suggestions for editorials or mailings or any other support you may require.
Com
pany
Pro
file
9
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Innovation
La-Pha-Pack® try to develop products that meet nowadays requirements of the chromatography market with regard to instrument / application suitability, convenience and price-performance ratio. Often also common development work is carried out in cooperation with instrument manufacturers. The most important product launches of this catalogue are shown below along with some short product profiles.
– The innovative TPX-Vial with integrated Glass Micro-Insert
TopSertTM are TPX Vials with an integrated glass Micro-Insert of 1st hydrolytic class. They are available with Short Thread or Snap Ring Neck and represent an eco-nomic alternative to either vials with fused-in Micro-Inserts or to Polymere spring Micro-Inserts. Both of these products are used for centering the Insert and pushing it up against the septa for tight sealing. As the Micro-Insert of the TopSertTM is sitting absolutely centric in a plastic mould and furthermore slightly exceeds the edge of the plastic vial, both before-mentioned requirements can be fulfilled. La-Pha-Pack® has enlarged its product range of TopSertTM vials and has included amber TPX vials with a clear micro insert for light-sensitive samples. These vials are also available in a short thread and snap ring version. All TopSertTM vials can also be obtained with a silanized Micro-Insert.
Com
pany
Pro
file
The perfect system for CTC Combi Pal + TriPlus Autosampler Magnetic Screw Seals and Precision Thread Vials
As magnetic caps are fairly hard to crimp La-Pha-Pack® have developped Screw Neck Vials (10ml + 20ml) and Magnetic Screw Seals for the CTC + TriPlus instru-ment. The vial has a precision thread with a lot of screw turns to force the septa against the vial to seal it gas-tightly. The centre hole is designed that way, that it is suitable for SPME as well as for standard Headspace analysis, but still offers enough surface for the magnet to transport a completely filled vial. Through the screw it is also always guaranteed that the cap has a flat surface, so that the vial does not drop of the magnet. Separation of vial and seal after analysis for waste disposal is also possible in a more convenient way. We have enlarged the product range of our vials with magnetic screw caps by universal screw caps with closed top. In case of sample taking outside the laboratory there is no need for a sample transfer, the analysis can be done in the same vial!
1.5ml Polypropylene Short Thread Vials
La-Pha-Pack® have developed a new 1.5ml Polypropylene Short Thread Vial for the specific requirements of Ion Chromatography, Atomic Absorption and Capillary Electrophoresis (CE + CE/MS). In contrast to glass vials, these are ideally suitable for the before-mentioned applications, as the plastic material is nonionic and non-reactive. Furthermore it doesn‘t contain any heavy metals and the inner vial surface reduces the adsorption of polar compounds, such as proteins and aminos. The vial is available in transparent and amber, chemically resistant Polypropylene and has well visible filling lines for convenient handling. The inner vial bottom is formed concave, so that dead volume is reduced and the needle finds optimal conditions for sample removal. With a volume of 1.5ml the vial is also an optimal sample container for pH-sensitive and aqueous samples, for example in the pharmaceuti-cal industry, as even glass vials of 1st hydrolytic class can only be deactivated with regard to hydrolytic resistance by silanisation.
10
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Com
pany
Pro
file
UltraBondTM Seals ND9 + ND24
UltraBondTM closures are seals where cap and liner form an unseparateable unit, so that the liner cannot fall out or be pushed into the vial when being penetrated with a blunt needle. The firm connection of liner and cap is not achieved by usage of any glue or adhesive, but by changing the molecular structure of the surface of the cap and the septa. UltraBondTM Seals can generally be made in all sizes. How-ever, by standard we sell various UltraBondTM Short Thread Seals ND9 with black and blue caps resp. as Screw Seals ND24 for EPA vials. In the range of 9mm short thread closures we have changed the Silicone material to an improved Waters® Quality. Due to the use of an extremely pure Silicone quality, the product safety was further optimized. Furthermore the PTFE layer was modified, which permits an even easier penetration of the needle.
PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
La-Pha-Pack® have enlarged their product line of HPLC Syringe Filters. The new HPLC Syringe Filters with Glass Fibre Prefilter are called ProFill TM PLUS.They are available with four different membrane types in two pore sizes. The new ProFill TM PLUS have the following additional advantages in comparison to the standard ProFill TM Syringe Filters:. The glass fibre prefilter with a pore size of 1-2µm for the prefiltration of the biggest particles. This prevents the real membrane from blockage/bursting due to strongy particle loaded media.. The real membrane for micro-filtration.. The additional injection-moulded ring around the housing increases the pressure
resistance of the filter unit (Pressure rating: 7bar = 700kPa) and improves the fixation of prefilter and membrane in the housing, so that a by-passing of sample liquid is impossible.. The additional print of the appropriate membrane type and pore size on the filter excludes possible confusions in usage and thus increases product safety.. Besides the membrane types of the standard ProFillTM HPLC Syringe Filters (Regen-erated Cellulose, Nylon(PA), PTFE), filters with prefilter are also available with a PVDF membrane with pore size 0.2µm resp. 0.45µm. .A filter with just a glass fibre membrane is also available.
PLUS
8mm and 11mm Push-On Caps made of PE
La-Pha-Pack® has enlarged its product range of PE-caps by blue Push-On Caps made of Polyethylene for crimp neck vials ND8 and crimp neck-/snap ring vials ND11. The Push-On caps offer a fast and easy possibility to seal crimp neck vials, as they can be pushed onto the vials without using a crimping tool. Furthermore these caps are an inexpensive alternative to crimp caps for uncritical applica-tions, as they do not contain any septa. A thinned penetration point facilitates the penetration of the needle. The caps are suitable for aqueous respectively for non-volatile samples and are often used in combination with PP vials in CE and Ion Chromatography.
11
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Com
pany
Pro
file
New Silicone/PTFE Pharma-Fix-Liner
Butyl/PTFE Pharma-Fix-Septa are nowadays very successfully used in the field of Headspace analysis. Pharma-Fix-Septa are only centrically laminated with PTFE in the contact area with the sample, whereas the unlaminated, elastic rubber edge of the liner covers the glass rim of the vial. Thus an excellent sealing can be achieved on the vial neck. Due to these especially in the Headspace field important advantages in tightness, La-Pha-Pack® have developped a 20mm Silicone/PTFE liner in the design of a Pharma-Fix-Septa that has a higher temperature resistance in comparison to the Butyl/PTFE Pharma-Fix-Septa (Silicone/PTFE Pharma-Fix-Septa from -60°C up to 200°C, Butyl/PTFE Pharma-Fix-Septa only between -40° and 120°C). Furthermore the Silicone/PTFE Septa is much easier to penetrate, as pen-etration tests with typical Headspace needles respectively with SPME-Phases have proven. The most decisive factor, however, in the selection between a Silicone/PTFE Pharma-Fix-Septa and Butyl/PTFE Pharma-Fix-Septa is the considerably higher purity of Silicone. Here is the really essential strength of Silicone/PTFE liners that in comparison to all other carrier materials are unmatched with regard to their analytical purity.
Magnetic Bimetal Cap
La-Pha-Pack® has enlarged their range of 20mm magnetic closures by the so-called “Bimetal” Cap. Generally we can assemble all common 20mm Septa in these Caps, however, we would like to point out that CTC recommends Silicone/PTFE septa due to the needle design and due to the requirements in purity.
Silanized Vials/Micro-Inserts
Silanized vials are used to reduce the adsorption of polar compounds onto the surface of the glass container. Some compounds like aminos, proteins or phe-nols tend to react with the glass, even if – as it is common for chromatography – 1st hydrolytic class glass is used. Through the silanization process the glass sur-face is deactivated and so possible reactions between the polar compounds and the glass are eliminated. La-Pha-Pack® offer the following silanized products: Short Thread Vials clear/amber glass, TopSertTM Vials with Short Thread/Snap Ring in clear and amber as well as two Micro-Inserts for Vials with wide opening. Further vials and micro inserts can be obtained as silanized products upon special request.
Amber Headspace Vials
Due to new requirements in certain fields of Headspace analysis La-Pha-Pack® have added amber Headspace vials to their broad variety of Headspace vials. 10ml and 20ml Headspace Vials for CTC are available analogous to the Precision Thread Vials ND18 and a 20ml Headspace Vial for Perkin Elmer and Tekmar.
New Range of Storage Vials
A complete new range of Screw Neck Vials with different volumes (2ml, 4ml, 8ml, 12ml, 16ml, 20ml, 30ml, 40ml und 60ml) has been added to the delivery programme. All vials are made of 1st hydrolytic class glass and are partially avail-able in clear and amber glass. As the Screw Neck Vials require seals with different screw caps, and as a broad selection of various septa is available in the caps, closures should be asked for individually. For better identification of the stored samples barcode labelling of the vials is also possible, however, a minimum order quantity may be required.
12
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Vials
In chromatography a broad variety of glass or plastic vials are used as sample containers for analysis usage. As they are mainly used within autosamplers or any other automatic instrument, strict obedience of all dimensions is crucial for a trouble-free run. Besides these physical properties the vials also have to fulfill requirements regarding inertness and cleanliness, as otherwise analysis results may be incorrect. La-Pha-Pack® consider the physical and chemical demands in their production process by various implementations:
Almost all vials are made out of SCHOTT glass tubing of 1st hydrolytic class glass. First hydrolytic class glass is very hard and has a low expansion coefficient even at high temperature variations. It shows an excellent chemical resistance to acidic and neutral solutions, and even to alkaline solutions due to its relatively low Alkali content. Higher density of the glass surface offers a higher hydrolytic resistance. Clear Glass of 1st hydrolytic class is differentiated by 33 expansion (Type 1, Class A) and 51 expansion glass (Type 1, Class B), whereas amber is generally worldwide only available as 51 expansion glass. The indicated lower expansion coefficient of 33 implies that this harder clear glass has to be processed at higher temperatures. These amount to approx. 1,200 °C for 33 expansion glass in comparison to only approx. 1,000 °C for glass of 51 expansion. In the USA typically clear glass in 33 expansion and amber glass in 51 expansion is used, whereas in Europe solely 51 expansion glass is processed. From a quality point of view both types of glass are equally suitable for usage in chromatogra-phy, as they both are glasses of 1st hydrolytic class. However, as for the forming of the glass tubes the vials to be manufactured are only heated partially, the risk of condensating substances extracted from the glass due to the processing temperatures is higher with 33 expansion glass. One reason is that higher produc-tion temperatures extract more substances out of the glass than lower temperatures. Another cause is that the temperature difference between heated and non-heated parts of the vial increases, the higher the manu-facturing temperature. SCHOTT glass tubing is a high quality tubing with very tight tolerances to ensure that the processed vial later fits exactly into the instruments on the market.
During the manufacturing process opto-electroni-cal devices at the machines check within parts of a second, if the processed vials meet the physical speci-fications (dimensions, etc.). In case of mismatch the vial is blown out into the trash. Besides this 100 per cent automatic control manual in-process controls as well as a final inspection according to DIN/ISO stand-ards further ensure functionality and perfect fit in the instrument.
All vials that carry a CleanPack label on the front side of the PP-Box have been packed in a certified clean-room class 10,000 after having passed the oven at approx. 600°C. These high hygienic conditions are pharmaceutical standard, however, new for chroma-tography vials. Thus the consumer can rely on clean, uncontaminated vials for a correct analysis.
Functional tests further ensure that the vial does not only fit the instrument, but also all components that might be connected to it, i.e. Micro-Inserts, Seals, etc.. A correct analysis can only be carried out, if the whole unit of vial (Micro-Insert) and closure harmonize with each other and achieve a tight seal.
HPLC certified vials are only of value, ifa.) analytical and physical specifications are avail-
able that are measureable and controlable ( Verification / DIN/ISO Documentation /
Warranty)b.) test methods are disclosed ( Reproduceability / Verification / Validity of the certificate)c.) the selected test samples are representative regard-
ing number and correspondence with the final product (have vials been tested directly out of pro-duction or out of original packs or even after some time of storage and how many per batch have been analysed)
( Credibility / Safety)d.) the certificate is informative and controlable for
everybodye.) warranty and claims for compensation arise from
the certificatef.) the certificate is unlimitedly valid for every user, for
every type of sample and for every application/analysis method
( Credibility / Safety / Warranty)However, even then everyone should be aware that the quality of a vial does not change by a certificate (as same raw materials and same production technol-ogy are used), but only the testing procedures differ.
1.
2.
3.
4.
5.
Tech
nica
l Inf
orm
atio
n
13
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Besides standard glass vials La-Pha-Pack® also supply some silanized glass products. Silanized glass products are used to reduce the adsorption of polar compounds onto the surface of the glass container (e.g. protein anal-ysis). Some compounds like aminos, proteins or phenols tend to react with the glass, and the silanization process prevents this by deactivating the glass surface.
In some specific applications like atomic absorption, water and protein analysis, capillary electrophoresis, etc., even plastic vials have to be used. La-Pha-Pack® also offer a broad range of Plastic Vials and Plastic Micro-Vials of different materials (PP, TPX).
In case the application requires pre-sealed vials (e.g. vials that are either already crimped or screwed), as for example in the tobacco industry, we can also supply you with any type of vial and closure already assembled. However, please note that the vials have to be taken out of the CleanPack packaging for the sealing process and thus cannot be called ”cleanroom” packed anymore.
EPA Vials can be supplied with or without certificate of cleanliness depending on the consumer’s requirements. Furthermore EPA vials can also be supplied with already screwed on seals.
Seals
Seals are the assembled combination of a cap and a septa. To carry out a correct analysis, it is important that besides the vial also the seal is inert and uncontaminated. La-Pha-Pack® assemble and pack their seals fully automatically in an uncertified clean room. Thus it is guaranteed that they are not contaminated by human skin fat or sweat, as it would be in case of manual assembly. Photocells check the side-orientation of the liner, so that it is ensured that the PTFE-lamination is always directed towards the sample to build an inert barrier between sample and carrier material of the septa. A gauge controls that not more or less than one liner is installed. The final seals are counted – and not weighed – by automates to guarantee quantity obedience. They are packed in tamper-evident zip-lock bags that allow easy identification of the content due to the transparent PE material. The zip-lock enables resealing of the bag to avoid any contamination of the closures during consumption. The batch number of the manfactured seal is printed on each PE-bag due to traceability reasons.
Besides a final inspection of the physical specifications of the seals, all closures that carry the indication “UltraCleanTM” are also GC-controlled in an external lab with regard to a possible release of volatiles.
UltraBondTM seals are closures where the cap and the septa form an unseparateable unit without usage of any glue or adhesive which are not allowed in chromatography products. This firm connection is achieved by a patented process changing the molecular structure of the cap’s and the septa’s surface, so that they form a unit. Thus it is ensured that the septa is not pushed into the vial during penetration, even if the needle is very thick and blunt. Examples for such UltraBondTM Seals are 24mm Screw Seals for EPA Vials or 9mm Short Thread Seals for Short Thread Vials.
Tech
nica
l Inf
orm
atio
n
In order to visualize the most important characteristics that differentiate the different types of vials, we show below some drawings helping you to identify a vial:
A) Design of the Neck
B) Design of the Bottom
Headspace Neck(bevelled Neck)
DIN Crimp Neck(flat Crimp Neck)
Special Neckfor SPME Vial
(thicker Crimp Neck)
Snap Ring Neck (can be used with Snap Ring Caps ND11
or Crimp Caps ND11)
Standard Screw Neck(Threads run down to
the shoulder of the vial)
Short Thread ND9 (Thread ends in the middle of the neck, so that there is still
some space between the edge of the cap and shoulder of the vial for robotic arms)
Snap Cap Neck(Sample storage containers,
no autosampler vials)
Fire-Polished Neck(Shell Vials)
Precision Thread ND18for Headspace and SPME
flat bottom rounded bottom(HS-bottom)
round bottom conical bottom Solid glass bottom of a Microliter vial with inner cone
14
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Tech
nica
l Inf
orm
atio
n
Screw Caps Short Thread Caps Snap Ring Caps Various UltraBondTM
(open top/closed top) (open top/closed top) (only as open top) Seals ND9 + ND24
Magnetic Magnetic Magnetic Screw Caps Magnetic Bimetal Crimp Caps Crimp Caps (8mm centre hole/closed top) Crimp Cap (5mm centre hole) (8mm centre hole) (8mm centre hole)
Headspace Caps Centre Tear Off Caps Complete Tear Off Caps Crimp Caps with roll (Pressure Release Caps) grove
Different closure techniques and/or application requirements necessitate certain caps. In order to visualize the different types of caps, please see the photos below:
Seals
PE-Plugs(for Shell Vials;
Micro-Inserts can be installed in the plug)
PE Caps(for Crimp Necks ND8,
ND11 + ND20)
Snap Caps(for sample storage
containers)
Aluminium Caps, centre hole
PE Push-On CapsND8 + ND11
15
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Tech
nica
l Inf
orm
atio
n
The right choice of septa depends on the application. Almost all septa are laminated on one side with PTFE, which has a high chemical resistance and forms an inert barrier between sample and carrier material of the septa. The car-rier materials have different physical and chemical properties, such as temperature resistance, resealability properties, cleanliness, hardness, thickness, etc.
Natural Rubber/TEF Butyl Butyl/PTFE Pharma-Fix-Septa (Butyl/PTFE)
Silicone/Aluminium Foil PTFE/Silicone/PTFE Silicone/PTFE Pharma-Fix-Septa PTFE/Butyl/PTFE (Silicone/PTFE)
Viton PTFE Septa for SCHOTT Screw Caps
Septa
In order to visualize the most common liners on the market, please see photos below. However, please note that colours of the liners are no exact indication for the identification of a liner material.
The individual conditions of the customer’s application aim at the specific characteristics of the carrier material, e.g.:
Multiple injection?
good resealabilityproperties necessary
Natural Rubber/TEF
Temperature? Thin, fragile needle?
soft and thin septa required
e.g.Silicone/PTFE
Blunt, thick needle?
Slitted liner as penetration
aid (HPLC)
e.g.08 02 0039
(page 20-chapter 2.4)
Critical analysis?
very clean liner required
Silicone/PTFE septa
Low coring?
Both sided PTFE laminated liners
required
PTFE/Silicone/PTFEPTFE/Butyl/PTFE
-40°Cup to
120°C
Natural Rubber/TEF;Butyl/PTFE
-60°Cup to
200°C
Silicone/PTFE
PTFE/EPDM/PTFE
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
16
1. C
rimp
Nec
k N
D8
1. Crimp Neck ND8
The vials are preferentially used on instruments of the following manu-facturers: Agilent, Beckman, Carlo Erba, CTC, Fisons, Perkin Elmer, Shimadzu, Thermo, VWR (Merck®)/Hitachi, etc. (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used) Broad selection of Crimp Neck Vials ND8 available:.with different volumes.with flat, round or conical bottom.in clear or amber glass.for almost all autosamplersCrimp Neck Vials and Micro Vials ND8 can be closed with 8mm Aluminium Caps, 9mm PE-Caps or with 8mm Push-On Caps. However, Micro Vials often need an adapter to run in the autosampler. They often have a conical bottom shape, so that they cannot stand by themselves, but need adapter.
08 09 0405 08 09 0406 08 09 0284 08 09 0845 08 09 09530.7ml
Crimp Neck Vial,40 x 7mm,clear glass,
1st hydrol. class
0.7mlCrimp Neck Vial,
40 x 7mm,amber glass,
1st hydrol. class
0.8mlCrimp Neck Vial,
30 x 8.2mm,clear glass,
1st hydrol. class
1.2mlCrimp Neck Vial,
40 x 8.2mm,clear glass,
1st hydrol. class
1.2mlCrimp Neck Vial,
40 x 8.2mm,amber glass,
1st hydrol. class
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
08 09 0276 08 09 0606 08 09 0305 08 09 0258 08 09 10800.3ml
Micro-Vial,31.5 x 5.5mm,
clear glass,1st hydrol. class,round bottom
0.3mlMicro-Vial,
31.5 x 5.5mm,clear glass,
1st hydrol. class,conical
0.7mlMicro-Vial,40 x 7mm,clear glass,
1st hydrol. class,conical
0.7mlMicro-Vial,40 x 7mm,
amber glass,1st hydrol. class,
conical
0.7mlMicro-Vial,30 x 7mm,
amber glass,1st hydrol. class,
conical
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
1.1 Crimp Neck Vials and Micro-Vials ND8
TIP
For 8mm Crimpers and Decappers please see chapter 17 on pages 50 cont.
All vials labelled with such a sticker are packed under pharmaceutical
conditions in a cleanroom class 10,000.
For Vial Racks please see chapter 18.1 on page 52
TIP
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
17
1. C
rimp
Nec
k N
D8
1.2 Aluminium Crimp Seals ND8
1.2.1 Natural Rubber/TEF Seals
– Temperature resistant from -40 °C up to 120 °C – Standard seal for GC and HPLC – Ideal for multiple injections due to high resealability – Not as clean as synthetic rubber
Packaging Unit: 100 pcs. per PE-Bag
1.2.2 Silicone/PTFE Seals
– Temperature resistant from -60 °C up to 200 °C – Much cleaner than Natural Rubber or Butyl – Preferably only for single injections due to low resealability properties – Silicone liners with PTFE on both sides for less coring – Different hardnesses (durometers) to meet requirements of the needle during penetration regarding penetration
1.2.3 Other Crimp Seals
– PTFE is very inert and high temperature resistant, however, – Viton is resistant to a number of corrosive organic problems with leakage due to the inflexibility and thinness of substances; the material; only for single injections; nearly no press fit in caps; temperature resistant from -23 °C up to 200 °C; mainly for uncritical HPLC analysis mainly used in petrochemical areas
1.3 Other Combination Seals for Crimp Neck ND8 – New Push-On Cap (08 08 1675) with thinned penetration point made of Polyethylene for Crimp Neck Vials and Micro-Vials ND8 – Inexpensive alternative to crimp caps for uncritical analyses, as it does not contain any septa, but only has a thinner penetration point.
Art. No. Description Cap Septa Material Durometer Thickn.
08 03 0268 Aluminium Cap clear lacquered, 4mm centre hole PTFE virginal 53° shore D 0.25mm08 03 0861 Aluminium Cap clear lacquered, 4mm centre hole Viton black 70° shore A 1.0mm08 03 0055 Aluminium Cap clear lacquered, 4mm centre hole Viton black 70° shore A 1.5mm
Art. No. Description Cap Septa Material Durometer Thickn.
08 03 0249 Aluminium Cap clear lacquered, 4mm centre hole Silicone white/PTFE red 45° shore A 1.3mm08 03 0165 Aluminium Cap clear lacquered, 4mm centre hole Silicone cream/PTFE red 55° shore A 1.5mm08 03 0884 Aluminium Cap clear lacquered, 4mm centre hole Silicone dark blue/PTFE white 45° shore A 1.3mm08 03 0599 Aluminium Cap clear lacquered, 4mm centre hole Silicone blue transparent/PTFE white 45° shore A 1.3mm08 03 0113 Aluminium Cap clear lacquered, 4mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm08 03 1156 Aluminium Cap clear lacquered, 4mm centre hole Silicone white/PTFE red, with slit 45° shore A 1.3mm
Art. No. Description Cap Septa Material Durometer Thickn.
08 03 0451 Aluminium Cap clear lacquered, 4mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mmAGILENT Quality
08 03 0200 Aluminium Cap clear lacquered, 4mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
For Septa ND8 please see chapter 2.4 (Screw Neck Vials ND8) on page 20!TIP
Further Crimp Seals ND8 or Combination Seals for Crimp Neck ND 8 are available upon request!
Art. No. Description Cap Septa Material Durometer Thickn.
08 08 1675 PE Push-On Cap, blue with thinned penetration point09 15 0753 PE-Cap, transparent, 9 x 5.9mm, 4mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm09 15 0756 PE-Cap, transparent, 9 x 5.9mm, 4mm centre hole Silicone white/PTFE red 45° shore A 1.3mm
Packaging Unit: 100 pcs. per PE-Bag
NEW
NEW
11 09 0210 11 09 0259 11 09 0419 11 09 0382 11 09 04171.5ml
Screw Neck Vial,32 x 11.6mm,
clear glass,1st hydrol. class,small opening
1.5mlScrew Neck Vial,32 x 11.6mm,amber glass,
1st hydrol. class,small opening
1.5mlScrew Neck Vial,32 x 11.6mm,
clear glass,1st hydrol. class,small opening,
label + filling lines
1.5mlScrew Neck Vial,32 x 11.6mm,amber glass,
1st hydrol. class,small opening,
label + filling lines
1.1mlMicro-Vial,
32 x 11.6mm,clear glass,
1st hydrol. class,conical
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
05 09 0129 05 09 0269 05 09 1674 05 09 0968 05 09 0279 05 13 04260.1ml
Micro-Insert,31 x 5mm,clear glass,
1st hydrol. class,15mm top
0.1mlMicro-Insert,31 x 5mm,clear glass,
1st hydrol. class,9mm top
0.2mlMicro-Insert,31 x 5mm,clear glass,
1st hydrol. class,flat bottom
0.1mlMicro-Insert,29 x 5mm,clear glass,
1st hydrol. class, with assembled plastic spring
0.05mlMicro-Insert,27.5 x 4mm,clear glass,
1st hydrol. classMetal Spring required!
Spring 36 x 5mm
For Micro-Insert 05 09 0279!
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
100 pcs.per PE-Bag
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
18
2. S
crew
Nec
k N
D8
2. Screw Neck ND8
2.1 Screw Neck Vials ND8, small opening, 8-425 thread, and Micro-Vials ND8
2.2 Micro-Inserts for Vials with small opening
Upon request vials with your logo can be manufactured as a special pro-duction
Upon request vials with a barcode label are available
Upon request pre-sealed vials are deliverable
TIP TIP TIP
The vials are preferentially used on instruments of the following manu- facturers: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR (Merck®)/Hitachi, etc. (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.Standard vials for GC and HPLC.Specially suitable for VWR (Merck®)/Hitachi instruments (Articles 11 09 0210, 11 09 0259, 05 09 0129, 08 15 0460, 08 08 0027, 08 02 0177, 08 02 0039).Broad range of Micro-Inserts.Vials and seals also available as 2in1 KIT .Small opening requires Micro-Inserts with a diameter of 5mm.Micro-Insert with flat bottom also available NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
19
2. S
crew
Nec
k N
D8
.Ready to use combination seals; no time-consuming and “tricky” assembly.Completely automated punching, assembling, counting and packaging process.No contamination of the liner with sweat/fat that normally is caused by manual assembly.Available in black or white screw caps with 8-425 thread.Available as closed top screw seals or with centre hole.Tamper-evident and recloseable zip-lock bags ensure product safety.Broad variety of different septa materials for almost all applications
2.3 PP Screw Seals ND8
2.3.1 Natural Rubber/TEF and Butyl/PTFE Seals
– Temperature resistant from -40 °C up to 120 °C – Natural Rubber is ideal for multiple injections due to high resealability – Butyl as a synthetic rubber has good chemical properties (cleanliness) – Standard, moderately priced seals for GC and HPLC
2.3.2 Silicone/PTFE Seals
– Temperature resistant from -60 °C up to 200 °C – The special, slitted liner for VWR (MERCK®)/HITACHI – Much cleaner than Natural Rubber or Butyl is only available unassembled, as the diameter with – Preferably only for single injections due to low resealability properties the most optimal valve effect does not achieve any – Silicone liners with PTFE on both sides for less coring press-fit in the cap. Enlargement of the diameter is – Different hardnesses (durometers) to meet requirements of the various only possible with negative effects on the building types of needles regarding penetration up of vacuums in the vial
Art. No. Description Cap Septa Material Durometer Thickn.
08 15 0460 Polypropylene Screw Cap black, 5.5mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm08 15 1637 Polypropylene Screw Cap black, 5.5mm centre hole Butyl red/PTFE grey 55° shore A 1.3mm08 15 0654 Polypropylene Screw Cap black, closed top Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm08 15 1653 Polypropylene Screw Cap black, closed top Butyl red/PTFE grey 55° shore A 1.3mm
Further Screw Seals ND8 with closed/open top resp. with white Caps are available upon request!
Art. No. Description Cap Septa Material Durometer Thickn.
08 15 0293 Polypropylene Screw Cap black, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm08 15 0427 Polypropylene Screw Cap black, 5.5mm centre hole Silicone cream/PTFE red 55° shore A 1.5mm08 15 0886 Polypropylene Screw Cap black, 5.5mm centre hole Silicone dark blue/PTFE white 45° shore A 1.3mm08 15 0709 Polypropylene Screw Cap black, 5.5mm centre hole Silicone blue transparent/PTFE white 45° shore A 1.3mm08 15 0294 Polypropylene Screw Cap black, 5.5mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm08 15 1040 Polypropylene Screw Cap black, closed top Silicone white/PTFE red 45° shore A 1.3mm08 15 1192 Polypropylene Screw Cap black, closed top Silicone cream/PTFE red 55° shore A 1.5mm
Further Screw Seals ND8 with closed/open top resp. with white Caps are available upon request!
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
20
2. S
crew
Nec
k N
D8
2.4 Septa 8mm
2.5 PP Screw Caps ND8
08 02 0177 08 02 0232 08 02 0355 08 02 1633 08 02 1680 08 02 0774 08 02 0220PTFE virginal,53° shore D,
0.25mm,(only unassembled)
Nat. Rubber red-orange/TEF transparent,
60° shore A,1.0mm,
(only unassembled)
Nat. Rubber red-orange/ TEF transparent,
60° shore A,1.3mm
tested by VWR (MERCK®)/HITACHI
Butyl red/PTFE grey,55° shore A,
1.3mm
PTFE grey/Butyl red/PTFE grey,55° shore A,
1.3mm
Viton black,70° shore A,
1.0mm
Viton black,70° shore A,
1.5mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
08 02 0103 08 02 0009 08 02 0881 08 02 0563 08 02 0039 08 02 0005
Silicone white/PTFE red, 45° shore A,
1.3mm
Silicone cream/PTFE red, 55° shore A,
1.5mm
Silicone dark blue/PTFE white,
45° shore A,1.3mm
Silicone transp. blue/PTFE white,
45° shore A,1.3mm
Silicone white/PTFE blue, 55° shore A,
0.9mm, slitted rec. by VWR (MERCK®)/HITACHI
(only unassembled)
PTFE red/Silicone white/PTFE red,
45° shore A,1.0mm
Against a smallsurcharge we also
sell in smaller packaging units!
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
08 08 0027 08 08 0420 08 08 0436 08 08 0435Polypropylene
Screw Cap, black,
5.5mm centre hole
Polypropylene Screw Cap,
black, closed top
Polypropylene Screw Cap,
white, 5.5mm centre hole
Polypropylene Screw Cap,
white, closed top
100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag
NEWNEW
TIP
2in1 KITs for VARIAN Autosampler
2.6 Special 2in1 KITs
3in1 KITs for VWR (MERCK®)/HITACHI Autosampler
Art. No. 3in1KIT Art. No. Vial Art. No. Cap Art. No. Septa Alternative 3in1 KITs/2in1 KITs
11 23 1047 11 09 0210 08 08 0027 08 02 0039 11 23 1144 11 23 10853in1 KIT consisting of:
11 09 0210,08 08 0027,08 02 0039
1.5ml Screw Neck Vial,32 x 11.6mm, clear glass,
1st hydrol. class,small opening
PolypropyleneScrew Cap,
black,5.5mm centre hole
Silicone white/PTFE blue, 55° shore A,
0.9mm, slitted rec. by VWR (MERCK®)/
HITACHI
Same Cap + same Septain combination with
11 09 0259(amber glass, small opening)
Same Vial + same Capin combination with
08 02 0177(PTFE virginal 0.25mm)
11 23 1145 11 09 0210 08 15 0460 11 23 1614 11 23 14992in1 KIT consisting of:
11 09 0210,08 15 0460
1.5ml Screw Neck Vial,32 x 11.6mm, clear glass,
1st hydrol. class,small opening
Polypropylene Screw Cap, black, 5.5mm centre hole, Nat. Rubber red-orange/
TEF transparent, 60° shore A, 1.3mm
Same Seal in combination with
11 09 0259(amber glass, small opening)
Same Seal in combination with
11 09 0419(clear glass, small opening,
with label + filling lines)
Art. No. 2in1KIT Art. No. Vial Art. No. Seal Alternative 2in1 KITs
11 23 1046 11 09 0210 08 15 0293 11 23 12802in1 KIT consisting of:
11 09 0210,08 15 0293
1.5ml Screw Neck Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, small opening
PP Screw Cap, black, 5.5mm centre hole; Silicone white/PTFE red,
45° shore A, 1.3mm
Same Seal in combination with 11 09 0419
(clear glass, small opening, with label + filling lines)
11 23 1098 11 09 0259 08 15 0293 11 23 11002in1 KIT consisting of:
11 09 0259, 08 15 0293
1.5ml Screw Neck Vial,32 x 11.6mm, amber glass,
1st hydrol. class,small opening
PP Screw Cap, black, 5.5mm centre hole; Silicone white/PTFE red,
45° shore A, 1.3mm
Same Seal in combination with 11 09 0382
(amber glass, small opening,with label + filling lines)Packaging Unit: 100 pcs. each in one KIT
Further 2in1 KITs are available upon request!
Packaging Unit: 100 pcs. each in one KIT
TIP
Any combination of 1.5ml Vials with one of the appropriate seals can
be supplied as 2in1 KIT!
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
21
3. S
hort
Thr
ead
ND9
3. Short Thread ND9
3.1 Short Thread Vials ND9, wide opening, and appropriate Micro-Inserts
3.2 Micro-Vials with Short Thread ND9 3.3 Silanized Products NEW
The Universal Autosampler Vial.Universally usable on almost all autosamplers, thereby rationalization of other 1.5ml vials, as for instance 11mm Crimp Neck Vials, Screw Neck Vials 8-425 and 10-425, is possible. .Wide opening enables easy filling with viscous materials.Broad range of Micro-Inserts and Micro-Vials.Any combination of 1.5ml Short Thread Vial resp. Short Thread Micro-Vial ND9 with one of our 9mm PP Screw Seals can be obtained as a 2in1 KIT (see chapter 3.5)
The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters®, etc.(Please have a look at the autosampler compatibility chart on pages 68-75 to see onwhich models they can be used)
11 09 0500 11 09 0519 11 09 0520 11 19 120511 19 1516
06 09 0357 06 09 0669 06 09 0865 06 09 0866
1.5mlShort Thread Vial,
32 x 11.6mm,clear glass,
1st hydrol. class,wide opening
1.5mlShort Thread Vial,
32 x 11.6mm,clear glass,
1st hydrol. class,wide opening,
label + filling lines
1.5mlShort Thread Vial,
32 x 11.6mm,amber glass,
1st hydrol. class,wide opening,
label + filling lines
1.5mlPP Short Thread Vial,
32 x 11.6mm,transparent/amber
with filling lines,slightly concave shaped bottom
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED: 06 09 1240
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,12mm top
0.1mlMicro-Insert,29 x 5.7mm,clear glass,
1st hydrol. class,with assembled plastic springSILANIZED: 06 09 1343
0.2mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,flat bottom
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PE-Bag
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
PP
11 09 0999 11 09 0620 11 14 1189 11 14 1655 11 09 1241 11 09 1242 06 09 1240 06 09 1343Short Thread Vial with integrated
0.2ml Micro-Insert,32 x 11.6mm,
clear glass,1st hydrol. class,
with label + filling lines
1.1ml MicroliterShort Thread Vial
ND9,32 x 11.6mm,
clear glass,1st hydrol. class
TPX Short Thread Vial,32 x 11.6mm,
clear, with integrated0.2ml Glass Micro-InsertSILANIZED: 11 14 1265
TPX Short Thread Vial,32 x 11.6mm,
amber, with integrated0.2ml Glass Micro-InsertSILANIZED: 11 14 1694
SILANIZED1.5ml Short Thread Vial, 32 x 11.6mm,
clear glass,1st hydrol. class,
wide opening
SILANIZED1.5ml Short Thread Vial, 32 x11.6mm,
amber glass,1st hydrol. class,wide opening,
label + filling lines
SILANIZED0.1ml Micro-Insert,
31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED0.1ml Micro-Insert,
29 x 5.7mm,clear glass,
1st hydrol. class,with assembled plastic spring
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
NEW
NEW
SILANIZED SILANIZED SILANIZED SILANIZED
NEW NEW NEWNEWNEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
22
3.4 PP Short Thread Seals ND9
3.4.1 With Transparent Cap
3.4.2 With Blue Cap
3.4.3 With Red Cap
3.4.5 UltraBondTM Seals ND9 (Cap + Liner form an unseparatable unit, so that the liner cannot be pushed into the vial even with a blunt needle)
3. S
hort
Thr
ead
ND9
Art. No. Description Cap Septa Material Durometer Thickn.
09 15 0981 PP Short Thread Cap transparent, 6mm centre hole PTFE virginal 53° shore D 0.2mm09 15 0478 PP Short Thread Cap transparent, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm09 15 0481 PP Short Thread Cap transparent, 6mm centre hole Silicone white/PTFE red 55° shore A 1.0mm09 15 0480 PP Short Thread Cap transparent, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm09 15 0852 PP Short Thread Cap transparent, 6mm centre hole Silicone white/PTFE blue, with slit 55° shore A 1.0mm
Art. No. Description Cap Septa Material Durometer Thickn.
09 15 0982 PP Short Thread Cap blue, 6mm centre hole PTFE virginal 53° shore D 0.2mm09 15 0867 PP Short Thread Cap blue, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm09 15 0838 PP Short Thread Cap blue, 6mm centre hole Silicone white/PTFE red 55° shore A 1.0mm09 15 0868 PP Short Thread Cap blue, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm09 15 0869 PP Short Thread Cap blue, 6mm centre hole Silicone white/PTFE blue, with slit 55° shore A 1.0mm
Art. No. Description Cap Septa Material Durometer Thickn.
09 15 1337 PP Short Thread Cap red, 6mm centre hole PTFE virginal 53° shore D 0.2mm09 15 1176 PP Short Thread Cap red, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm09 15 1178 PP Short Thread Cap red, 6mm centre hole Silicone white/PTFE red 55° shore A 1.0mm09 15 1177 PP Short Thread Cap red, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm09 15 1179 PP Short Thread Cap red, 6mm centre hole Silicone white/PTFE blue, with slit 55° shore A 1.0mm
9mm Short Thread Seals with a green or a yellow cap as well as a blueclosed top version are avialable upon reques!
Art. No. Description Cap Septa Material Durometer Thickn.
09 04 1220 PP Short Thread Cap black, 6mm centre hole Silicone white/PTFE red 45° shore A 1.3mm09 04 1533 PP Short Thread Cap blue, 6mm centre hole Silicone beige/PTFE white
improved WATERS® Quality45° shore A 1.3mm
09 04 1534 PP Short Thread Cap blue, 6mm centre hole Silicone beige/PTFE white, with slitimproved WATERS® Quality
45° shore A 1.3mm
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
.Ready to use combination seals.Short thread seals also available as closed top version (blue cap).Screw cap with the design of a crimp cap; therefore suitable for robotic handling.Already assembled seal with slitted liner available, in order to avoid
vacuum within the vial in case of multiple injections. UltraBondTM Short Thread Seals available in improved WATERS® quality (see chapter 3.4.5)
NEW3.4.4 With Black Cap
Art. No. Description Cap Septa Material Durometer Thickn.
09 15 1668 PP Short Thread Cap black, 6mm centre hole PTFE virginal 53° shore D 0.2mm09 15 1570 PP Short Thread Cap black, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm09 15 1572 PP Short Thread Cap black, 6mm centre hole Silicone white/PTFE red 55° shore A 1.0mm09 15 1571 PP Short Thread Cap black, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm09 15 1669 PP Short Thread Cap black, 6mm centre hole Silicone white/PTFE blue, with slit 55° shore A 1.0mm
– Analogous to the LECTRABOND closure from WATERS® resp. the INTERSEAL closure from AGILENT we also offer several UltraBondTM Short Thread Seals, among others also in an improved WATERS® quality. The new septa material is an especially pure Silicone material, which optimizes the product safety even more. Furthermore, the PTFE layer was modified, which permits an even easier penetration of the needle.
Packaging Unit: 100 pcs. per PE-Bag
NEW
NEW
NEW
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
23
3. S
hort
Thr
ead
ND9
2in1 KIT with PP Short Thread Micro-Vials, transparent
3.5 Special 2in1 KITs
2in1 KITs with Short Thread Vials
2in1 KIT with Microliter Short Thread Vial, clear glass
Further 2in1 KITs are available upon request!
Art. No. 2in1 KIT Art. No. Vial Art. No. Seal Alternative 2in1 KITs
11 24 1140 11 09 0500 09 15 0478
2in1 KIT consisting of: 11 09 0500,09 15 0478
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap transparent, 6mm centre hole;
Nat. Rubber red-orange/TEF transparent, 60° shore A, 1.0mm
Further 2in1 KITs can be made according to
your wishes!
11 24 1141 11 09 0500 09 15 0481 11 24 1142 11 24 10912in1 KIT consisting of:
11 09 0500,09 15 0481
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap transparent, 6mm centre hole; Silicone white/PTFE red,
55° shore A, 1.0mm
Same Seal in combination with 11 09 0519
(clear glass, with label + filling lines)
Same Seal in combination with 11 09 0520
(amber glass, with label + filling lines)
11 24 1049 11 09 0500 09 15 0867 11 24 1528
2in1 KIT consisting of: 11 09 0500,09 15 0867
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap blue, 6mm centre hole;
Nat. Rubber red-orange/TEF transparent, 60° shore A, 1.0mm
Same Seal in combination with 11 09 0520
(amber glass, with label + filling lines)
11 24 1050 11 09 0500 09 15 0838 11 24 1143 11 24 13422in1 KIT consisting of:
11 09 0500,09 15 0838
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap blue, 6mm centre hole; Silicone white/PTFE red,
55° shore A, 1.0mm
Same Seal in combination with 11 09 0519
(clear glass, with label + filling lines)
Same Seal in combination with 11 09 0520
(amber glass, with label + filling lines)
11 24 1051 11 09 0500 09 15 0869 11 24 1238 11 24 15732in1 KIT consisting of:
11 09 0500,09 15 0869
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap blue, 6mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.0mm, with slit
Same Seal in combination with 11 09 0519
(clear glass, with label + filling lines)
Same Seal in combinationwith 11 09 0520
(amber glass, with label + filling lines)
11 24 1052 11 09 0500 09 15 0868 11 24 1446 11 24 14472in1 KIT consisting of:
11 09 0500,09 15 0868
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
PP Short Thread Cap blue, 6mm centre hole;
PTFE red/Silicone white/PTFE red, 45° shore A, 1.0mm
Same Seal in combinationwith 11 09 0519
(clear glass, with label + filling lines)
Same Seal in combinationwith 11 14 1189
( , clear, with integrated Glass Micro-Insert)
11 24 1622 11 09 0500 09 04 1534 11 24 1696
2in1 KIT consisting of: 11 09 0500,09 04 1534
1.5ml Short Thread Vial, 32 x 11.6mm, clear glass,
1st hydrol. class, wide opening
UltraBondTM Seal blue, 6mm centre hole;Silicone beige/PTFE white, with slit,
45° shore A, 1.3mmimproved WATERS® Quality
Same Seal in combination with 11 09 0520
(amber glass, with label + filling lines)
Art. No. 2in1KIT Art. No. Vial Art. No. Seal
11 24 1129 11 09 0620 09 15 08692in1 KIT consisting of:
11 09 0620,09 15 0869
1.1ml Microliter Short Thread Vial ND9,
32 x 11.6mm, clear glass, 1st hydrol. class
PP Short Thread Cap blue, 6mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.0mm, with slit
Packaging Unit: 100 pcs. each in one KIT
11 24 1130 11 19 0932 09 15 0869 11 24 16432in1 KIT consisting of:
11 19 0932,09 15 0869
0.3ml PP Short Thread
Micro-Vial, 32 x 11.6mm
PP Short Thread Cap blue, 6mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.0mm, with slit
Same Vial in combination
with 09 04 1534
Packaging Unit: 100 pcs. each in one KIT
11 24 1476 11 19 0932 09 15 0838 11 24 15932in1 KIT consisting of:
11 19 0932,09 15 0838
0.3ml PP Short Thread
Micro-Vial, 32 x 11.6mm
PP Short Thread Cap blue, 6mm centre hole; Silicone white/PTFE red,
55° shore A, 1.0mm
Same Vial in combination
with 09 15 0868
Packaging Unit: 100 pcs. each in one KIT
Packaging Unit: 100 pcs. each in one KIT
NEW
10 09 0743 10 09 1196 10 09 1197 06 09 0357 06 09 0669 06 09 0865 06 09 08661.5ml
Screw Neck Vial,10-425 Thread,32 x 11.6mm,
clear glass,1st hydrol. class,
wide opening
1.5mlScrew Neck Vial,10-425 Thread,32 x 11.6mm,
clear glass,1st hydrol. class,wide opening,
label + filling lines
1.5mlScrew Neck Vial,10-425 Thread,32 x 11.6mm,amber glass,
1st hydrol. class,wide opening,
label + filling lines
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED: 06 09 1240
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,12mm top
0.1mlMicro-Insert,29 x 5.7mm,clear glass,
1st hydrol. class,with assembled plastic spring
SILANIZED: 06 09 1343
0.2mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,flat bottom
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
24
4. S
crew
Nec
k N
D10
4. Screw Neck ND10
4.1 Screw Neck Vials ND10, wide opening, 10-425 thread, and appropriate Micro-Inserts
4.2 PP Screw Seals ND10
Art. No. Septa Material
10 02 0646 PTFE virginal, 53° shore D, 0.25mm (only unassembled) 09 02 0723 Silicone white/PTFE beige, 45° shore A, 1.5mm
Art. No. Description Cap
10 08 0742 Polypropylene Screw Cap black, 7mm centre hole
4.4 PP Screw Caps ND104.3 Septa 10mm
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 1000 pcs. per PE-Bag
Art. No. Description Cap Septa Material Durometer Thickn.
10 15 1256 Polypropylene Screw Cap black, 7mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm10 15 1257 Polypropylene Screw Cap black, 7mm centre hole Silicone white/PTFE red 45° shore A 1.3mm10 15 0744 Polypropylene Screw Cap black, 7mm centre hole Silicone white/PTFE beige 45° shore A 1.5mm10 15 1258 Polypropylene Screw Cap black, 7mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm10 15 1328 Polypropylene Screw Cap black, 7mm centre hole Silicone white/PTFE blue, with slit 55° shore A 1.5mm
The vials are preferentially used on instruments of the following manu- facturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.(Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.Wide opening enables easy filling with viscous materials.Broad range of Micro-Inserts.Alternatively you can also look for Short Thread Vials in chapter 3.1.Any combination of 1.5ml Screw Neck Vial 10-425 with one of our 10mm PP Screw Seals can be obtained as a 2in1 KIT.Packed in a cleanroom class 10,000 which is a new hygienic standard for chromatography vials.Upon request the vials can be delivered with a barcode label or with pre-sealed 10-425 closures
11 09 0356 11 09 0476 11 09 0477 06 09 0357 06 09 0669 06 09 0865 06 09 08661.5ml
Crimp Neck Vial,32 x 11.6mm,
clear glass,1st hydrol. class,
wide opening
1.5mlCrimp Neck Vial,32 x 11.6mm,
clear glass,1st hydrol. class,wide opening,
label + filling lines
1.5mlCrimp Neck Vial,32 x 11.6mm,amber glass,
1st hydrol. class,,wide opening,
label + filling lines
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED: 06 09 1240
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,12mm top
0.1mlMicro-Insert,29 x 5.7mm,clear glass,
1st hydrol. class,with assembled plastic springSILANIZED: 06 09 1343
0.2mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,flat bottom
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
25
5. C
rimp
Nec
k N
D11
5. Crimp Neck ND11
5.1 Crimp Neck Vials ND11, wide opening, and appropriate Micro-Inserts
5.2 Micro-Vials with Crimp Neck ND11
11 09 0486 11 09 0415 11 09 0921 11 09 0619 11 14 1190 11 14 16560.9ml
Micro-Vial, 32 x 10mm,clear glass,
1st hydrol. class,conical
1.1mlMicro-Vial,
32 x 11.6mm,clear glass,
1st hydrol. class,conical
Crimp Neck Vialwith integrated
0.2ml Micro-Insert,32 x 11.6mm,
clear glass,1st hydrol. class,
with label + filling lines
1.1mlMicroliter-Vial,32 x 11.6mm,
clear glass,1st hydrol. class
TPX Snap Ring Vial, 32 x 11.6mm,
clear, with integrated0.2ml Glass Micro-Insert
SILANISIERT: 11 14 1266
TPX Snap Ring Vial, 32 x 11.6mm,
amber, with integrated 0.2ml Glass Micro-Insert
SILANISIERT: 11 14 169510 x 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box
The vials are preferentially used on instruments of the following manu- facturers: Agilent, Carlo Erba, CTC, Dani, Fisons, Gerstel, Jasco, Perkin Elmer, Shimadzu, Spark, Thermo, Varian, etc. (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used) .Standard vials for GC and HPLC.Wide opening enables easy filling.Vials with a barcode label can be obtained as well as pre-crimped vials.Microliter Vials (11 09 0619) for sample preparation (reactions, concen- trations) or as an alternative for conical Micro-Vials resp. Crimp Neck Vials with Inserts.Use our TopSertTM Micro-Vial as a cost-effective alternative to glass vials with fused-in Micro-Inserts resp. to Micro-Insert with plastic spring! Their glass Micro-Insert is absolutely centered in the plastic mould and pressed firmly against the septa due to its slightly exceeding edges. New in our delivery programme TopSertTM Vials made of amber TPX for light-sensitive samples.
NEW
NEWNEW
11 09 0831 11 09 0184
2.5ml Crimp Neck Vial, 41 x 11.6mm,
clear glass, 1st hydrol. class,
wide opening
1.5ml Crimp Neck Vial, 32 x 11.6mm,
clear glass, 1st hydrol. class, small opening
100 pcs. per PP-Box 100 pcs. per PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
26
5.3 Other Crimp Neck Vials ND11
5.4 Aluminium Crimp Seals ND11
5.4.1 Natural Rubber/TEF Seals
– Temperature resistant from -40 °C up to 120 °C – Standard seal for GC and HPLC – Not as clean as synthetic rubber – Ideal for multiple injections due to high resealability – Three layer septa of Natural Rubber/Butyl/TEF combines the good physical properties of Nat. Rubber (resealability) with the good chemical properties of Butyl (cleanliness)
5.4.2 Silicone/PTFE Seals
– Temperature resistant from -60 °C up to 200 °C – Much cleaner than Natural Rubber or Butyl – Preferably only for single injections due to low resealability properties – Cross-slitted liner as penetration aid and for low – Silicone liners with PTFE on both sides for less coring coring, but also for avoiding vacuum in the vial in – Different hardnesses (durometers) to meet requirements of case of multiple injections the various types of needles regarding penetration
5. C
rimp
Nec
k N
D11
Art. No. Description Cap Septa Material Durometer Thickn.
11 03 0209 Aluminium Cap clear lacquered, 5.5mm centre hole Nat. Rubber red-orange/TEF transparentAGILENT Quality
60° shore A 1.0mm
11 03 0300 Aluminium Cap clear lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm11 03 0301 Aluminium Cap green lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm11 03 0302 Aluminium Cap red lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm11 03 0303 Aluminium Cap blue lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm11 03 0304 Aluminium Cap gold lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.0mm11 03 0700 Aluminium Cap clear lacquered, 5.5mm centre hole Nat. Rubber red-orange/Butyl red/TEF transparent 45° shore A 1.3mm
Art. No. Description Cap Septa Material Durometer Thickn.
11 03 0247 Aluminium Cap clear lacquered, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 1625 Aluminium Cap green lacquered, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 0666 Aluminium Cap red lacquered, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 0667 Aluminium Cap blue lacquered, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 1624 Aluminium Cap gold lacquered, 5.5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 0362 Aluminium Cap clear lacquered, 5.5mm centre hole Silicone cream/PTFE red 55° shore A 1.5mm11 03 0885 Aluminium Cap clear lacquered, 5.5mm centre hole Silicone dark blue/PTFE white 45° shore A 1.3mm11 03 0588 Aluminium Cap clear lacquered, 5.5mm centre hole Silicone blue transparent/PTFE white 45° shore A 1.3mm11 03 0196 Aluminium Cap clear lacquered, 5.5mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm11 03 0464 Aluminium Cap clear lacquered, 5.5mm centre hole Silicone white/PTFE blue, cross-slitted 55° shore A 1.5mm
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Any combination of 1.5ml Vials with one of the appropriate seals can be supplied as
2in1 KIT!
TIP
For Vial Racks please see chapter 18.1 on page 52
For 11mm Crimpers and Decappers please see chapter
17 on pages 50 cont.
TIP
TIP
NEW
NEW
NEW
NEW
All above mentionned clear lacquered closures are also available with green, red, blue or gold caps.
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
27
5. C
rimp
Nec
k N
D11
5.5 Magnetic Crimp Seals ND11 (for CTC PAL + TriPlus Autosampler)
Art. No. Description Cap Septa Material Durometer Thickn.
11 03 0318 Magnetic Cap, gold lacquered, 5mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 03 0332 Magnetic Cap, gold lacquered, 5mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
5.4.3 Other Crimp Seals
– PTFE is very inert and high temperature resistant, however, – Butyl as synthetic rubber is much cleaner than Natu- problems with leakage due to the inflexibility and thinness of the ral Rubber; temperature resistant from -40 °C up to material; only for single injections; nearly no press fit in caps, 120 °C; resealability properties not as good as with therefore caps with roll grove necessary; mainly for uncritical Natural Rubber; two-sided lamination with PTFE HPLC analysis reduces number of particles generated during pene- tration process (coring) – Viton is resistant to a number of corrosive organic substances, temperature resistant from -23 °C up to 200 °C; mainly used in petrochemical areas.
Art. No. Description Cap Septa Material Durometer Thickn.
11 03 0339 Aluminium Cap clear lacquered, 5.5mm centre hole,roll grove
PTFE virginal 53° shore D 0.25mm
11 03 1641 Aluminium Cap clear lacquered, 5.5mm centre hole Butyl red/PTFE grey 55° shore A 1.3mm11 03 1663 Aluminium Cap clear lacquered, 5.5mm centre hole PTFE grey/Butyl red/PTFE grey 55° shore A 1.3mm11 03 0720 Aluminium Cap clear lacquered, 5.5mm centre hole Viton black 70° shore A 1.0mm11 03 0407 Aluminium Cap clear lacquered, 5.5mm centre hole Viton black 70° shore A 1.5mm
All before-mentioned crimp seals are also available with gold, green, blue and red caps (with the exception of 11 03 0339)
Packaging Unit: 100 pcs. per PE-Bag
NEW
NEW
Art. No. Description Cap Septa Material Durometer Thickn.
11 08 1676 PE Push-On Cap, blue with thinned penetration point13 15 0553 PE-Cap, transparent, 13 x 7.5mm, 4.5mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm13 15 0996 PE-Cap, transparent, 13 x 7.5mm, 4.5mm centre hole Silicone white/PTFE red 55° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
5.6 Other Combination Seals for Crimp Neck ND11
– New Push-On Cap (11 08 1676) with thinned penetration point made of Polyethylene for Crimp Neck Vials and Snap Ring Vials ND11 – Inexpensive alternative to crimp caps for uncritical analyses, as it does not contain any septa, but only has a thinner penetration point.
NEW
NEWNEW
5.7 Septa 11mm
11 02 0176 11 02 0534 11 02 1634 11 02 1662 11 02 0721 11 02 0221
Against a smallsurcharge we also
sell in smaller packaging units!
(Minimum order quantity 1,000 pieces)
PTFE virginal, 53° shore D,
0.25mm
Nat. Rubber red-orange/TEF transparent,
60° shore A, 1.0mm
Butyl red/PTFE grey, 55° shore A,
1.3mm
PTFE grey/Butyl red/PTFE grey,
55° shore A, 1.3mm
Viton black, 70° shore A,
1.0mm
Viton black, 70° shore A,
1.5mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
11 02 0104 11 02 0140 11 02 0882 11 02 0564 11 02 0446 11 02 0115Silicone white/PTFE red,
45° shore A, 1.3mm
Silicone cream/PTFE red,55° shore A,
1.5mm
Silicone dark blue/PTFE white,
45° shore A, 1.3mm
Silicone transp. blue/PTFE white,
45° shore A, 1.3mm
Silicone white/PTFE blue, 55° shore A,
1.5mm, cross-slitted
PTFE red/Silicone white/PTFE red,
45° shore A, 1.0mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
NEW NEWTIP
11 09 0627 11 09 0644 11 09 0645 06 09 0357 06 09 0669 06 09 0865 06 09 08661.5ml
Snap Ring Vial,32 x 11.6mm,
clear glass,1st hydrol. class,
wide opening
1.5mlSnap Ring Vial,32 x 11.6mm,
clear glass,1st hydrol. class,wide opening,
label + filling lines
1.5mlSnap Ring Vial,32 x 11.6mm,amber glass,
1st hydrol. class,wide opening,
label + filling lines
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED: 06 09 1240
0.1mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,12mm top
0.1mlMicro-Insert, 29 x 5.7mm,clear glass,
1st hydrol. class,with assembledplastic spring
SILANIZED: 06 09 1343
0.2mlMicro-Insert,31 x 6mm,clear glass,
1st hydrol. class,flat bottom
100 pcs.per PP-Box
100 pcs.per PP-Box
100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
10 x 100 pcs.per PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
28
6. S
nap
Ring
ND1
1
6. Snap Ring ND11
6.1 Snap Ring Vials ND11, wide opening, and appropriate Micro-Inserts
6.2 Micro-Vials with Snap Ring ND11
For Vial Racks please see chapter 18.1 on page 52
For HPLC Syringe Filters and HPLC Syringe Filters with Glass Fibre Prefilter please see chapter 14 on page 47 and 48
TIP
TIP
PLUS
The vials are preferentially used on instruments of the following manufacturers: Agilent, CTC, Dani, Dionex, Jasco, Shimadzu, Spark, Thermo, Varian, VWR (Merck®)/Hitachi, Waters®, etc.(Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.We recommend this vial-/closure system for HPLC applications.Universally usable vials for almost all autosamplers, even for those with robotic handling.Convenient handling .Vials can also be crimped with a standard 11mm Aluminium Crimp Seal, as the two snap ring lips have the same height as a crimp neck.Wide opening enables easy filling with viscous materials
.Less cost intensive alternative to Glass Vials with integrated Micro-Insert respectively alter-native to Micro-Inserts with Polymere spring.More rigid than the fragile Glass Vials with fused-in Micro-Inserts.Absolutely centric and firm fit of the Micro-Insert.Excellent sealing of the slightly exceeding Micro-Insert by the septa.Good transparency and chemical resistance of the clear TPX vials. Amber TPX vials can be used for light-sensitive samples..Safe standing position; vial can be lifted by the plastic flanges.Standard dimensions of the Vial and the Micro-Insert guarantee a troublefree run in the autosampler .Packed with 100 pieces in a PP-Box or in combination with seals as a 2in1 KIT
11 14 1190 11 14 1656
TPX Snap Ring Vial, 32 x 11.6mm,
clear, with integrated
0.2ml Glass Micro-Insert
SILANISIERT: 11 14 1266
TPX Snap Ring Vial, 32 x 11.6mm,
amber, with integrated
0.2ml Glass Micro-Insert
SILANISIERT: 11 14 1695
100 pcs. per PP-Box
100 pcs. per PP-Box
NEW NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
29
6. S
nap
Ring
ND1
1
6.3.1 With Transparent Cap
Art. No. Description Cap Septa Material Durometer Thickn.
11 15 0635 PE Snap Ring Cap transparent, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm11 15 0637 PE Snap Ring Cap transparent, 6mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 15 0636 PE Snap Ring Cap transparent, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm11 15 0650 PE Snap Ring Cap transparent, 6mm centre hole Silicone white/PTFE blue, cross-slitted 55° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
6.3.2 With Blue Cap
6.3.3 With Red Cap
11mm Snap Ring Caps with a green or yellow cap are available upon special request as well as Snap Ring Caps made of softer PE material in transparent or blue.
Art. No. Description Cap Septa Material Durometer Thickn.
11 15 1323 PE Snap Ring Cap red, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm11 15 1325 PE Snap Ring Cap red, 6mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 15 1324 PE Snap Ring Cap red, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm11 15 1326 PE Snap Ring Cap red, 6mm centre hole Silicone white/PTFE blue, cross-slitted 55° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
Art. No. Description Cap Septa Material Durometer Thickn.
11 15 1267 PE Snap Ring Cap blue, 6mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.0mm11 15 1151 PE Snap Ring Cap blue, 6mm centre hole Silicone white/PTFE red 45° shore A 1.3mm11 15 1268 PE Snap Ring Cap blue, 6mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm11 15 1269 PE Snap Ring Cap blue, 6mm centre hole Silicone white/PTFE blue, cross-slitted 55° shore A 1.0mm
Packaging Unit: 100 pcs. per PE-Bag
6.3 PE Snap Ring Seals ND11
.Ready to use combination seals; no time-consuming and ”tricky” assembly.Upon special request Snap Ring Seals with a green or a yellow cap can be made.Snap ring caps are also available in a soft special quality with transparent or blue caps.Snap ring cap with the design of a crimp cap; therefore suitable for robotic handling.Easy way of closing the vial: time-, cost- and energy-saving.Vials can also be sealed with an Aluminium Crimp Seal ND11.Closures are packed in tamper-evident and recloseable zip-lock bags.Blue PE Push-On Cap with thinned penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11
NEW
NEW
NEW6.4 Other Combination Seals for Snap Ring ND11
– New Push-On Cap (11 08 1676) with thinned penetration point made of Polyethylene for snap ring and crimp neck vials ND11 – Inexpensive alternative to crimp caps for uncritical analyses, as it does not contain any septa, but only has a thinner penetration point. – Push-On caps can be used as an alternative to snap ring caps with PTFE liner
Art. No. Description Cap
11 08 1676 PE Push-On Cap, blue, with thinned penetration point
Packaging Unit: 100 pcs. per PE-Bag
NEW
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
30
11 19 120511 19 1516
11 19 0932 11 19 0933 11 19 1021 11 19 1022 11 19 1216 11 19 1217
1.5mlPP Short Thread Vial,transparent/amber
with filling lines,32 x 11.6mm,
slightly concave shaped bottom
0.3ml PP Short Thread
Micro-Vial,transparent,
32 x 11.6mm
0.3ml PP Snap RingMicro-Vial,
transparent,32 x 11.6mm
0.3mlTPX Short Thread
Micro-Vial,crystal clear,
32 x 11.6mm
0.3mlTPX Snap Ring
Micro-Vial,crystal clear,
32 x 11.6mm
0.3ml PP Short Thread
Micro-Vial,amber,
32 x 11.6mm
0.3ml PP Snap RingMicro-Vial,
amber,32 x 11.6mm
100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag
7. P
last
ic M
icro
-Via
ls
7. Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11
.Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography, etc..1.5ml Polypropylene Short Thread Vial with slightly concave shaped bottom. Usable in HPLC as a possible alternative to silanized glass vials for pH-sensitive and aqueous samples..TPX has a crystal clear transparency and good chemical resistance.Any combination of our plastic vials with one of our seals can be obtained as a 2in1 KIT.Also available our so-called TopSertsTM Vials: transparent and amber TPX Micro-Vials with a Glass Insert (Page 21 and 25).Special Push-On Cap with thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11 NEW
NEW
7.1 Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11
NEW
NEW
7.2 Seals for Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11
2in1 KITs for DIONEXArt. No. 2in1KIT Art. No. Vial Art. No. Seal
Further 2in1 KITs can be made according to
your wishes!
11 24 1557 11 19 1205 09 15 08692in1 KIT consisting of:
11 19 1205,09 15 0869
1.5ml PP Short Thread Vial,32 x 11.6mm, transparent,
with filling lines
PP Short Thread Cap blue, 6mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.0mm, with slit
Packaging Unit: 100 pcs. each in one KIT
2in1 KITs for WATERS®
Art. No. 2in1KIT Art. No. Vial Art. No. Seal Alternative 2in1 KITs
11 24 1130 11 19 0932 09 15 0869 11 24 1476 11 24 16432in1 KIT consisting of:
11 19 0932,09 15 0869
0.3ml PP Short Thread Micro-Vial,32 x 11.6mm,
transparent
PP Short Thread Cap blue, 6mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.0mm, with slit
Same Vial in combinationwith 09 15 0838
(Silicone white/PTFE red,55° shore A, 1.0mm)
Same Vial in combinationwith 09 04 1534(UltraBondTM Seal,
slitted)Packaging Unit: 100 pcs. each in one KIT
Type of Seal Chapter Page(s)
Short Thread Seals ND9 3.4 22Snap Ring Seals ND11 6.3 29Crimp Seals ND11 5.4 26-2711 08 1676 5.6 + 6.4 27 + 29
7.3 Special 2in1 KITs NEW
TPX TPX PP PPPPPP PP
13 09 0222 13 09 1335 13 09 0280 13 09 1336 40 09 0146 50 13 01474ml
Screw Neck Vial,45 x 14.7mm,
clear glass,1st hydrol. class
4mlScrew Neck Vial,45 x 14.7mm,
clear glass,1st hydrol. class,
label + filling lines
4mlScrew Neck Vial,45 x 14.7mm,amber glass,
1st hydrol. class
4mlScrew Neck Vial,45 x 14.7mm,amber glass,
1st hydrol. class,label + filling lines
0.3mlMicro-Insert,40 x 6mm,clear glass,
1st hydrol. class, 15mm topMetal Spring required!
Spring 50 x 7.5mm
For Micro-Insert40 09 0146!
100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 10 x 100 pcs. per PP-Box 100 pcs. per PE-Bag
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
31
8. S
crew
Nec
k N
D13
8. Screw Neck ND13
8.1 Screw Neck Vials ND13 and appropriate Micro-Inserts
8.2 PP Screw Seals ND13
.Ready to use combination seals; no time-consuming and “tricky” assembly.No contamination of the liner with sweat/fat that normally is caused by manual assembly.Available as closed or open top screw seals with 13-425 thread.Tamper-evident and recloseable zip-lock bags ensure product safety.Broad variety of different septa materials for almost all applications
Art. No. Description Cap Septa Material Durometer Thickn.
13 15 0456 Polypropylene Screw Cap black, 8.5mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm13 15 1639 Polypropylene Screw Cap black, 8.5mm centre hole Butyl red/PTFE grey 55° shore A 1.3mm13 15 0815 Polypropylene Screw Cap black, 8.5mm centre hole Silicone cream/PTFE red 55° shore A 1.5mm13 15 0887 Polypropylene Screw Cap black, 8.5mm centre hole Silicone dark blue/PTFE white 45° shore A 1.3mm13 15 0292 Polypropylene Screw Cap black, 8.5mm centre hole PTFE red/Silicone white/PTFE red 45° shore A 1.0mm13 15 1293 Polypropylene Screw Cap black, 8.5mm centre hole Silicone white/PTFE blue, cross-slitted 55° shore A 1.5mm13 15 0439 Polypropylene Screw Cap black, closed top Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm13 15 1638 Polypropylene Screw Cap black, closed top Butyl red/PTFE grey 55° shore A 1.3mm13 15 0648 Polypropylene Screw Cap black, closed top Silicone cream/PTFE red 55° shore A 1.5mmFurther Screw Seals ND13 with closed/open top caps are available upon request!
Packaging Unit: 100 pcs. per PE-Bag
The vials are preferentially used on instruments of the following manufacturers: Dionex, Shimadzu, Spark, Varian, VWR (MERCK®)/HITACHI, WATERS® (Wisp 48 Position Carousel), etc. (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.Product line has been enlarged by clear/amber vials with label + filling lines.Vials are packed in a cleanroom class 10,000 in recloseable, tamper-evident PP-Boxes.Any combination of 4ml Screw Neck Vial ND13 with one of our 13mm PP Screw Seals can be obtained as a 2in1 KIT (see chapter 8.5).Upon request barcode labelled vials can also be supplied.For storage purposes also available with closed top screw seals .Acrylic vial racks with 40 cavities for 4ml vials (s.chapter 18.1) NEW
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
32
For Vial Racks please see chapter 18.1 on page 52
Upon request vials with a barcode label are available
Any combination of 4ml Vials with one of the appropriate seals can
be supplied as 2in1 KIT!
For HPLC Syringe Filters and HPLC Syringe Filters with Glass Fibre Prefilter please see
chapter 14 on page 47 and 48
PLUS
TIP
TIP
TIP
TIP
8. S
crew
Nec
k N
D13
12 02 0168 12 02 0223 12 02 1635 12 02 0143 12 02 0608 12 02 0322 12 02 0463PTFE virginal,53° shore D,
0.25mm,(only unassembled)
Nat. Rubber red-orange/TEF transparent,
60° shore A,1.3mm
Butyl red/PTFE grey,55° shore A,
1.3mm
Silicone cream/PTFE red,55° shore A,
1.5mm
Silicone transp. blue/PTFE white,
45° shore A,1.3mm
Silicone white/PTFE blue,55° shore A,
1.5mmcross-slitted
PTFE red/Silicone white/PTFE red,
45° shore A,1.0mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
8.3 Septa 12mm
Further 12mm Septa are available upon request!
8.4 PP Screw Caps ND13
13 08 0166 13 08 0336 13 08 0639 13 08 0452Polypropylene
Screw Cap,black,
8.5mm centre hole
PolypropyleneScrew Cap,
black, closed top
PolypropyleneScrew Cap,
white,8.5mm centre hole
PolypropyleneScrew Cap,
white,closed top
100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag
8.5 Special 2in1 KITs3in1 KITs for VWR (MERCK®)/HITACHI and WATERS® Autosampler
Other 2in1 KITs
Art. No. 3in1KIT Art. No. Vial Art. No. Cap Art. No. Septa
13 28 1071 13 09 0222 13 08 0166 12 02 01683in1 KIT consisting of:
13 09 0222,13 08 0166,12 02 0168
4ml Screw Neck Vial,45 x 14.7mm,
clear glass,1st hydrol. class
PolypropyleneScrew Cap,
black,8.5mm centre hole
PTFE virginal, 53° shore D,
0.25mm
13 28 1076 13 09 0280 13 08 0166 12 02 01683in1 KIT consisting of:
13 09 0280,13 08 0166,12 02 0168
4ml Screw Neck Vial,45 x 14.7mm, amber glass,
1st hydrol. class
Polypropylene Screw Cap,
black,8.5mm centre hole
PTFE virginal, 53° shore D,
0.25mm
Art. No. 2in1KIT Art. No. Vial Art. No. Seal Alternative 2in1 KITs
13 28 1067 13 09 0222 13 15 0456 13 28 10722in1 KIT consisting of:
13 09 0222,13 15 0456
4ml Screw Neck Vial, 45 x 14.7mm,
clear glass, 1st hydrol. class
PP Screw Cap, black, 8.5mm centre hole;
Nat. Rubber red-orange/ TEF transparent,
60° shore A, 1.3mm
Same Seal in combination
with 13 09 0280(amber glass)
13 28 1069 13 09 0222 13 15 0815 13 28 10742in1 KIT consisting of:
13 09 0222,13 15 0815
4ml Screw Neck Vial, 45 x 14.7mm,
clear glass, 1st hydrol. class
PP Screw Cap, black, 8.5mm centre hole;
Silicone cream/PTFE red, 55° shore A, 1.5mm
Same Seal in combination
with 13 09 0280(amber glass)
13 28 1070 13 09 0222 13 15 0292 13 28 10752in1 KIT consisting of:
13 09 0222,13 15 0292
4ml Screw Neck Vial, 45 x 14.7mm,
clear glass, 1st hydrol. class
PP Screw Cap, black, 8.5mm centre hole;
PTFE red/Silicone white/PTFE red,
45° shore A, 1.0mm
Same Seal in combination
with 13 09 0280(amber glass)
13 28 1541 13 09 0222 13 15 1293
Further 2in1 KITs can be made according
to your wishes!
2in1 KIT consisting of: 13 09 0222,13 15 1293
4ml Screw Neck Vial, 45 x 14.7mm,
clear glass, 1st hydrol. class
PP Screw Cap, black, 8.5mm centre hole;
Silicone white/PTFE blue, 55° shore A, 1.5mm
cross-slitted
Further 2in1 KITs are available upon request!
Packaging Unit: 100 pcs. each in one KIT
Packaging Unit: 100 pcs. each in one KIT
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
33
9. S
hell
Vial
s
The vials are preferentially used on instruments of the following manu- facturers: Alcott, Gilson, Shimadzu, Waters® (Wisp 96 respectively 48 Position Carousel) (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.A handy and inexpensive vial/closure combination for uncritical analyses .PE-Plugs may be used for the fixation of a Micro-Insert; thus no springs are required for their usage.Star-shaped diaphragm enables easy penetration of the PE-Plug.Recommended for HPLC usage .For the 1ml Shell Vials a plug with and one without insertion barrier for Micro-Inserts is available. The one without barrier shows a better valve effect with regard to the formation of a vacuum
NEW
08 14 0641 08 14 0513* 08 14 0595* 05 09 0706 15 14 0548 15 14 0562 06 09 0651
1ml Shell Vial,35 x 7.8mm,clear glass,
1st hydrol. class,6mm PE-Plug,transparent,
for ALCOTT
1ml Shell Vial,40 x 8.2mm,clear glass,
1st hydrol. class,8mm PE-Plug,transparent
for WATERS® Wisp96 Pos. Carousel
1ml Shell Vial,40 x 8.2mm,amber glass,
1st hydrol. class,8mm PE-Plug,transparent
for WATERS® Wisp96 Pos. Carousel
0.1ml Micro-Insert,34 x 5mm,clear glass,
1st hydrol. class,13mm top
4ml Shell Vial,44.6 x 14.65mm,
clear glass,1st hydrol. class,15mm PE-Plug,
transparent
for WATERS® Wisp48 Pos. Carousel
4ml Shell Vial,44.6 x 14.65mm,
amber glass,1st hydrol. class,15mm PE-Plug,
transparent
for WATERS® Wisp48 Pos. Carousel
0.3ml Micro-Insert,43.45 x 6mm,
clear glass,1st hydrol. class,
13mm top
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
10 x 100 pcs. per PP-Box
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
10 x 100 pcs. per PP-Box
9. Shell Vials
9.1 Shell Vials 1ml and 4ml and appropriate Micro-Inserts
08 14 0513* resp. 08 14 0595* are alternatively available with a PE-Plug that has no inner barrier for the insertion of a Micro-Insert (==> 08 14 1168 resp. 08 14 1169). Thus the plug is not as sturdy and penetration and valve effect are further improved. In case no Micro-Insert is used, we would recommend 08 14 1168 or 08 14 1169.
NEW
11 14 0544 11 14 0545 06 09 0357 06 09 0669 06 09 08662ml Shell Vial,
31.5 x 11.6mm,clear glass,
1st hydrol. class,12mm PE-Plug,
transparent
for various instruments
2ml Shell Vial,31.5 x 11.6mm,
amber glass,1st hydrol. class,12mm PE-Plug,
transparent
for various instruments
0.1ml Micro-Insert,31 x 6mm,clear glass,
1st hydrol. class,15mm top
SILANIZED: 06 09 1240
0.1ml Micro-Insert,31 x 6mm,clear glass,
1st hydrol. class,12mm top
0.2ml Micro-Insert,31 x 6mm,clear glass,
1st hydrol. class,flat bottom
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
100 pcs. per PP-Box (Vials)
100 pcs. per PE-Bag (Plugs)
10 x 100 pcs. per PP-Box
10 x 100 pcs. per PP-Box
10 x 100 pcs. per PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
34
9.3 Special 2in1 KITs
Art. No. 2in1KIT Art. No. Vial Art. No. Plug
08 27 1670 08 09 0483 08 08 04882in1 KIT consisting of:
08 14 05131ml Shell Vial, 40 x 8.2mm,
clear glass, 1st hydrol. class
8mm PE-Plug, transparent (with insertion barrier)
08 27 1671 08 09 0484 08 08 04882in1 KIT consisting of:
08 14 05951ml Shell Vial, 40 x 8.2mm,
amber glass, 1st hydrol. class
8mm PE-Plug, transparent (with insertion barrier)
08 27 1672 08 09 0483 08 08 11672in1 KIT consisting of:
08 14 11681ml Shell Vial, 40 x 8.2mm,
clear glass, 1st hydrol. class
8mm PE-Plug, transparent (without insertion barrier)
08 27 1673 08 09 0484 08 08 11672in1 KIT consisting of:
08 14 11691ml Shell Vial, 40 x 8.2mm,
amber glass, 1st hydrol. class
8mm PE-Plug, transparent (without insertion barrier)
11 27 1063 11 09 0537 12 08 05462in1 KIT consisting of:
11 14 05442ml Shell Vial,
31.5 x 11.6mm, clear glass, 1st hydrol. class
12mm PE-Plug, transparent
11 27 1064 11 09 0538 12 08 05462in1 KIT consisting of:
11 14 05452ml Shell Vial,
31.5 x 11.6mm, amber glass, 1st hydrol. class
12mm PE-Plug, transparent
15 27 1065 15 09 0539 15 08 05472in1 KIT consisting of:
15 14 05484ml Shell Vial,
44.6 x 14.65mm, clear glass, 1st hydrol. class
15mm PE-Plug, transparent
15 27 1066 15 09 0540 15 08 05472in1 KIT consisting of:
15 14 05624ml Shell Vial,
44.6 x 14.65mm, amber glass, 1st hydrol. class
15mm PE-Plug, transparent
Packaging Unit: 100 pcs. each in one KIT
Any combination of 2ml or 4ml Shell Vials with one of the appropriate PE-Plugs can
be supplied as 2in1 KIT!
Any combination of 1ml Shell Vials with one of the appropriate PE-Plugs can
be supplied as 2in1 KIT!
TIP
TIP
9. S
hell
Vial
s
9.2 Shell Vials 2ml and appropriate Micro-Inserts
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
35
Headspace Vials might differ in:.Volume (5ml, 10ml, 20ml).Rounded or flat bottom A rounded bottom is more sturdy and thus more resistant to the high pressure within the vial during the heating process. Furthermore the vial slides more easily into the heating block when being transported by a magnet. A flat bottom might be necessary when vials have to run within the instrument on a slightly downwards tendency..Bevelled top or flat DIN Crimp Neck / Screw Neck A bevelled top Headspace Neck might be required for some special closure systems (PERKIN ELMER), however a liner has more surface to lie on with a flat DIN Crimp Neck. The more surface for the liner to rest on, the tighter the seal..Length of the Neck (instrument specific).Clear / Amber Glass.With / without label and filling lines.Upon request with a barcode label
The Headspace instruments on the market require a broad variety of vials and closures. To facilitate the identification of the right vial, indications on the instrument suitability are given at the bottom of our product overview.
The right choice of closure might depend on the instrument or appli-cation. Therefore please study the individual features of the various types of caps in chapter 10.3 as well as the properties of the liners at the top of each seal chapter. In case of questions, you are always welcome to contact us for advice.
A Screw Neck Vial for PERKIN ELMER with PP Screw Seals as well as Screw Neck Vials ND18 with Magnetic Screw Seals for CTC are novelties in the crimp neck dominated Headspace market. However, especially for the hard to crimp magnetic caps, screw closures are a convenient alternative.
IMPORTANT SAFETY TIP:
As Headspace vials have to withstand high internal pressure, almost all vials on the next page have a wall thickness of 1.2mm. Thus it is guaranteed that the vial will not burst. Contrary to a widely spread opinion, the seal and not the vial represents the weakest part of the whole sytem. Under pressure the septa will bulge against the Aluminium cap with such a force that the cap is torn apart. By own testing we varified that e.g. our Perkin Elmer vial 20 09 0297 can easily withstand 10 bars or more while the seal is torn apart at around 10 bars when no pressure release system – like our Headspace Cap – is used.
Headspace Closures might differ in:
.Type of Cap Centre Hole Crimp Cap, Headspace Cap, Centre Tear Off Cap, Complete Tear Off Cap, Magnetic Crimp Cap with 5mm or 8mm centre hole, Bimetal Cap, Magnetic Screw Cap (with 8mm centre hole or closed top), PP Screw Cap, PE Cap. Screw Caps are a novelty in the crimp neck dominated Headspace area. However, they represent a ready to use, convenient solution, that does not require any additional tools (crimpers, decappers). Thus samples can be taken and sealed out in the field without the necessity of sample transfer later in the lab. The magnetic Screw Seals can be used universally for Headspace as well as for SPME..Type of Liner Butyl, Butyl/PTFE, Pharma-Fix-Liner (Butyl/PTFE or Silicone/PTFE), Silicone/PTFE, Silicone/Aluminium Foil, Viton, Natural Rubber/TEF Besides the material the liners might differ in thickness, hardness (° shore A), colour, type of PTFE lamination, grade of Silicone (UltraCleanTM).
10. H
eads
pace
ND2
0 (N
D18)
10. Headspace ND20 (ND18)
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
36
20 09 0342 20 09 0801 20 09 140520 09 1691
20 09 0802 20 09 0795 20 09 029720 09 1223
20 09 0440
5ml Headspace-Vial,38.2 x 22mm,
clear glass,1st hydrol. class,rounded bottom
5ml Crimp Neck Vial,38 x 20mm,clear glass,
1st hydrol. class,flat bottom
10ml Headspace-Vial,46 x 22.5mm,
clear/amber glass,1st hydrol. class,DIN-crimp neck,rounded bottom
10ml Crimp Neck Vial,54.5 x 20mm,
clear glass,1st hydrol. class,
flat bottom
10ml Headspace-Vial,46 x 22.5mm,
clear glass,1st hydrol. class,DIN-crimp neck,
long neck, flat bottom
20ml Headspace-Vial,75.5 x 23mm,
clear/amber glass,1st hydrol. class,rounded bottom
20ml Headspace-Vial,75.5 x 23mm,
clear glass,1st hydrol. class,rounded bottom,
with label + filling lines100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box
Perkin Elmer Varian Carlo Erba, CTC, Fisons, Varian (CP)
Varian Carlo Erba, Dani,Fisons, Agilent
Perkin Elmer,Tekmar
Perkin Elmer,Tekmar
20 09 0796 20 09 087320 09 1690
20 09 1222 18 09 0864 18 09 130618 09 1310
18 09 130718 09 1311
20ml Headspace-Vial,75.5 x 22.5mm,
clear glass,1st hydrol. class,DIN-crimp neck,
long neck, flat bottom
20ml Headspace-Vial,75.5 x 22.5mm,
clear/amber glass,1st hydrol. class,DIN-crimp neck,
long neck, rounded bottom
20ml SPME Vial,75.5 x 22.5mm,
clear glass,1st hydrol. class,rounded bottom,
special crimp neck
20ml Headspace-Vial,75.5 x 23mm,
clear glass,1st hydrol. class,rounded bottom,
with screw thread ND18
10ml Precision Thread Vial ND18,
46 x 22.5mm,clear/amber glass,1st hydrol. class,rounded bottom
20ml Precision ThreadVial ND18,
75.5 x 22.5mm,clear/amber glass,1st hydrol. class,rounded bottom
100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box
Carlo Erba, Dani,Fisons, Agilent
CTC PAL (Varian, Gerstel, Atas,
Shimadzu), TriPlus HS
SPME Vial for CTC PAL
SPME Crimp Seals, pls. s. p. 39,
chapter 10.3.7
Perkin Elmer,
PP Screw Seals,pls. s. p. 40, chapter 10.6
CTC PAL (Varian, Gerstel, Atas,
Shimadzu, Agilent),Magnetic Screw Seals,
pls. s. p. 40, chapter 10.7 + 10.8
CTC PAL (Varian, Gerstel, Atas,
Shimadzu, Agilent),Magnetic Screw Seals,
pls. s. p. 40, chapter 10.7 + 10.8
10. H
eads
pace
ND2
0 (N
D18)
NEWNEW
NEW
10.1 Headspace Vials ND20 + ND18
NEW
20 09 0289 20 09 0343
50ml Crimp Neck Vial,101 x 31mm,
clear glass, 1st hydrol. class
100ml Crimp Neck Vial,94.5 x 51.6mm,
clear glass, 3rd hydrol. class
100 pcs. per PP-Box 88 pcs. shrink-wrapped
10.2 Other Crimp Neck Vials ND20
Any 20ml Headspace-Vial can be obtained with the appropriate
seal as a 2in1 KIT!
TIP
10.3 Aluminium Crimp Seals ND20
No actual size, just schematic
drawing
No actual size, just schematic
drawing
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
37
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 0127 Aluminium Cap, plain, 10mm centre hole Butyl, dark grey 55° shore A 3.0mm20 03 0126 Headspace Cap, clear lacquered Butyl, dark grey 55° shore A 3.0mm20 03 0195 Centre Tear-Off Cap, clear lacquered Butyl, dark grey 55° shore A 3.0mm20 03 0212 Complete Tear-Off Cap, clear lacquered Butyl, dark grey 55° shore A 3.0mm20 03 0711 Magnetic Cap, gold, 5mm centre hole Butyl, dark grey 55° shore A 3.0mm20 03 1157 Magnetic Cap, gold, 8mm centre hole Butyl, dark grey 55° shore A 3.0mm
10.3.1 Butyl Seals
– Temperature resistant from -40 °C up to 120 °C – Due to the missing PTFE lamination only suitable for uncritical analyses – Low-cost product
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 0059 Aluminium Cap, plain, 10mm centre hole Butyl/PTFE, grey 50° shore A 3.0mm20 03 0112 Headspace Cap, clear lacquered Butyl/PTFE, grey 50° shore A 3.0mm20 03 0194 Centre Tear-Off Cap, clear lacquered Butyl/PTFE, grey 50° shore A 3.0mm20 03 0186 Complete Tear-Off Cap, clear lacquered Butyl/PTFE, grey 50° shore A 3.0mm20 03 0698 Magnetic Cap, gold, 5mm centre hole Butyl/PTFE, grey 50° shore A 3.0mm20 03 1186 Magnetic Cap, gold, 8mm centre hole Butyl/PTFE, grey 50° shore A 3.0mm
10.3.2 Butyl/PTFE Seals (completely PTFE laminated)
– Temperature resistant from -40 °C up to 120 °C – Completely laminated with PTFE
Overview of the various crimp caps, which can be obtained with a broad variety of different liners!
Any type of cap can O N L Y be obtained in combination with a liner or a stopper!
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.
Centre Hole Cap
Headspace Cap
Centre Tear-Off Cap
Complete Tear-Off Cap
Magnetic Crimp Cap
Magnetic Crimp Cap
Magnetic Bimetal Crimp Cap
Plain, red, blue,gold, green
10mm centre hole
Clear lacquered,scorelines break open at 3.0 ± 0.5 bar for
pressure release
Clear lacquered,red, blue, gold,
green
Clear lacquered,red, blue, gold,
green
Gold,5mm centre hole
CE HS500/HS800, CTC 500,Fisons HS500/HS800
Gold,8mm centre holeCTC Combi PAL,
Thermo TriPlus HS
Red,8mm centre holeCTC Combi PAL,
Thermo TriPlus HS
10. H
eads
pace
ND2
0 (N
D18)
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
38
10.3.3 Pharma-Fix Seals (Butyl/PTFE)
– Special, moulded Butyl/PTFE liner that is only laminated with PTFE – Temperature resistant from -40 °C up to 120 °C in the contact area towards the sample. On the glass rims the elastic – Tighter alternative to the completely laminated Butyl achieves a very tight seal Butyl/PTFE liners (see chapter 10.3.2)
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 0030 Aluminium Cap, plain, 10mm centre hole Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm20 03 0264 Headspace Cap, clear lacquered Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm20 03 0060 Centre Tear-Off Cap, clear lacquered Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm20 03 0061 Complete Tear-Off Cap, clear lacquered Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm20 03 0710 Magnetic Cap, gold, 5mm centre hole Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm20 03 1200 Magnetic Cap, gold, 8mm centre hole Pharma-Fix-Septa, Butyl/PTFE 50° shore A 3.0mm
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.Packaging Unit: 100 pcs. per PE-Bag
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 0142 Aluminium Cap, plain, 10mm centre hole Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0163 Headspace Cap, clear lacquered Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0226 Centre Tear-Off Cap, clear lacquered Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0227 Complete Tear-Off Cap, clear lacquered Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0665 Magnetic Cap, gold, 5mm centre hole Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0975 Magnetic Cap, gold, 8mm centre hole Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 1536 Magnetic Bimetal Cap, red, 8mm centre hole Silicone transparent blue/PTFE white 45° shore A 3.0mm20 03 0901 Aluminium Cap, plain, 10mm centre hole Silicone white/PTFE beige (AGILENT HT Quality) 45° shore A 3.25mm20 03 0828 Headspace Cap, clear lacquered Silicone white/PTFE beige (AGILENT HT Quality) 45° shore A 3.25mm
Packaging Unit: 100 pcs. per PE-Bag
10.3.4 Silicone/PTFE Seals (completely PTFE laminated)
– Temperature resistant from -60 °C up to 200 °C – Completely laminated with PTFE – Clean/UltraCleanTM liners for sensitive analyses – Soft liners for easy penetration – White/beige liner corresponds to AGILENT HT liner
10. H
eads
pace
ND2
0 (N
D18)
10.3.6 Silicone/Aluminium Foil Seals
– Temperature resistant from -60 °C up to 220 °C – Completely laminated with Aluminium Foil silver – Often used on PERKIN ELMER instruments
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 0327 Aluminium Cap, plain, 10mm centre hole Silicone white/Aluminium Foil silver 50° shore A 3.0mm20 03 0326 Headspace Cap, clear lacquered Silicone white/Aluminium Foil silver 50° shore A 3.0mm20 03 0670 Magnetic Cap, gold, 5mm centre hole Silicone white/Aluminium Foil silver 50° shore A 3.0mm
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.
Packaging Unit: 100 pcs. per PE-Bag
10.3.5 Pharma-Fix Seals (Silicone/PTFE)
– Special Silicone/PTFE liner that is only laminated – Temperature resistant from -60 °C up to 200 °C with PTFE in the contact area towards the sample. – UltraCleanTM liners for sensitive analyses On the glass rims the elastic Silicone achieves a – Soft liners for easy penetration very tight seal
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 1489 Aluminium Crimp Cap, plain, 10mm centre hole Pharma-Fix Septa, Silicone blue/PTFE grey 45° shore A 3.0mm20 03 1490 Headspace-Cap, clear lacquered Pharma-Fix Septa, Silicone blue/PTFE grey 45° shore A 3.0mm20 03 1491 Magnetic Crimp Cap, gold, 8mm centre hole Pharma-Fix Septa, Silicone blue/PTFE grey 45° shore A 3.0mm20 03 1577 Magnetic Bimetal Cap, red, 8mm centre hole Pharma-Fix Septa, Silicone blue/PTFE grey 45° shore A 3.0mm
Packaging Unit: 100 pcs. per PE-Bag
The liner can also be obtained assembled in any of the (coloured) caps mentioned on top of page 37.
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
39
10.3.7 Magnetic Seals for SPME-Vial 20 09 1222 for CTC + TriPlus
– Much thinner liners for easier penetration of the sensitive phase – Special Silicone/PTFE liner with an only 0.05mm thin casted Teflon film instead of 0.13mm skived PTFE lamination that is standard for any other 20mm Headspace liner. Thus penetration is even easier, as PTFE is the hardest part to penetrate. – These special products should only be used in combination with the SPME-Vial 20 09 1222 which has a much thicker crimp neck than all standard Headspace Vials.
Art. No. Description Cap Septa Material Durometer Thickn.
20 03 1246 Magnetic Cap, gold, 8mm centre hole Silicone white/PTFE blue 55° shore A 1.5mm20 03 1264 Magnetic Cap, gold, 8mm centre hole Viton black 70° shore A 1.0mm
10.4 Septa/Stoppers 20mm
Further 20mm Septa available upon request!
Art. No. Description Cap Septa Material Durometer Thickn.
22 15 0321 PE-Cap, transparent, 22 x 8.4mm, 4.3mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm22 15 1697 PE-Cap, transparent, 22 x 8.4mm, 4.3mm centre hole Butyl red/PTFE grey 55° shore A 1.3mm22 15 0712 PE-Cap, transparent, 22 x 8.4mm, 4.3mm centre hole Silicone transparent blue/PTFE white 45° shore A 1.3mm
suitable for 20 09 0297, 20 09 0342, 20 09 0440, 20 09 1223
22 15 0863 PE-Cap, transparent, 22 x 9.1mm, 4.3mm centre hole Nat. Rubber red-orange/TEF transparent 60° shore A 1.3mm22 15 1646 PE-Cap, transparent, 22 x 9.1mm, 4.3mm centre hole Butyl red/PTFE grey 55° shore A 1.3mm22 15 1334 PE-Cap, transparent, 22 x 9.1mm, 4.3mm centre hole Silicone transparent blue/PTFE white 45° shore A 1.3mm
suitable for 20 09 0289, 20 09 0343, 20 09 0795, 20 09 0796, 20 09 0801, 20 09 0802, 20 09 0873, 20 09 1405, 20 09 1690, 20 09 1691
10.5 Other Combination Seals for HS-Neck/Crimp Neck ND20
– Seals for washer bottles on the instruments – Intermediate-closure when collecting samples out in the field
10.5.1 Septa 19.5mm
19 02 0245 19 02 1636 19 02 0693Nat. Rubber red-orange/
TEF transparent,60° shore A,
1.3mm
Butyl red/PTFE grey,55° shore A,
1.3mm
Silicone transp. blue/PTFE white,
45° shore A,1.3mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
10.5.2 PE-Caps 22mm
22 08 0340 22 08 025722mm PE-Cap,transparent,
4.3mm centre hole,skirt height 8.4mm
22mm PE-Cap,transparent,
4.3mm centre hole,skirt height 9.1mm
100 pcs. per PE-Bag 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
20 02 0122 20 02 0057 20 02 0035 20 02 1488 20 02 0141 20 02 0638 20 10 0290Moulded Septa Butyl,
dark grey,55° shore A, 3.0mm
Moulded SeptaButyl/PTFE, grey,
50° shore A, 3.0mm
Pharma-Fix-Septa(Butyl/PTFE),
50° shore A, 3.0mm
Pharma-Fix-Septa(Silicone blue/PTFE grey),
45° shore A, 3.0mm
Silicone transp. blue/PTFE white,
45° shore A, 3.0mm
Silicone white/PTFE beige,
45° shore A, 3.25mm(AGILENT HT Quality)
20mm Butyl Injection Stopper,
greyrec. by PERKIN ELMER
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 100 pcs. per PE-Bag
10. H
eads
pace
ND2
0 (N
D18)
NEW
NEW
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
40
16 02 0653 16 02 1678 16 02 1384 16 02 1385 16 02 0659 16 02 0870 16 02 0705Nat. Rubber red-orange/
TEF transparent,60° shore A,
1.3mm
Butyl red/PTFE grey,55° shore A,
1.3mm
Butyl red/PTFE grey,55° shore A,
1.6mm
Butyl red/PTFE grey,55° shore A,
2.0mm
Silicone white/PTFE red,45° shore A,
1.3mm
Silicone transp. blue/PTFE white,
45° shore A, 1.7mm
PTFE red/Silicone white/PTFE red,
45° shore A, 1.0mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
Art. No. Description Cap Septa Material Durometer Thickn.
18 15 1386 Polypropylene Screw Cap black, 12mm centre hole Butyl red/PTFE grey 55° shore A 1.6mm18 15 1387 Polypropylene Screw Cap black, closed top Butyl red/PTFE grey 55° shore A 1.6mm18 15 0871 Polypropylene Screw Cap black, 12mm centre hole Silicone transparent blue/PTFE white 45° shore A 1.7mm18 15 1132 Polypropylene Screw Cap black, closed top Silicone transparent blue/PTFE white 45° shore A 1.7mm
Further Screw Seals ND18 with closed/open top caps are available upon request!
10.6 PP Screw Seals ND18 for 18 09 0864
10.6.1 Septa 16mm
10.6.2 PP Screw Caps ND18
18 08 0516 18 08 0614Polypropylene
Screw Cap,black,
12mm centre hole
PolypropyleneScrew Cap,
black,closed top
100 pcs. per PE-Bag 100 pcs. per PE-Bag
10.7 Universal Magnetic Screw Seals ND18 for Precision Thread Vials 18 09 1306, 18 09 1310, 18 09 1307, 18 09 1311 for CTC + TriPlus
Packaging Unit: 100 pcs. per PE-Bag
Art. No. Description Cap Septa Material Durometer Thickn.
18 03 1578 Magnetic Screw Cap silver, 8mm centre hole Silicone white/PTFE red 45° shore A 1.3mm18 03 1309 Magnetic Screw Cap silver, 8mm centre hole Silicone transparent blue/PTFE white 45° shore A 1.3mm18 03 1414 Magnetic Screw Cap silver, 8mm centre hole Silicone white/PTFE blue 55° shore A 1.5mm18 03 1416 Magnetic Screw Cap silver, 8mm centre hole Butyl red/PTFE grey 55° shore A 1.6mm
Packaging Unit: 100 pcs. per PE-Bag
10. H
eads
pace
ND2
0 (N
D18)
NEW
NEW
Attention! These screw seals are not suitable for article number 18 09 1306, 18 09 1307, 18 09 1310, 18 09 1311!
Attention! These screw seals are not suitable for article number 18 09 0864!
NEW
10.8 Universal Screw Seals ND18, closed top, for Precision Thread Vials 18 09 1306, 18 09 1310, 18 09 1307, 18 09 1311
Art. No. Description Cap Septa Material Durometer Thickn.
18 03 1666 Universal Screw Cap silver, closed top Silicone white/PTFE red 45° shore A 1.3mm18 03 1667 Universal Screw Cap silver, closed top Butyl red/PTFE grey 55° shore A 1.6mm
Packaging Unit: 100 pcs. per PE-Bag
NEW
For Vial Racks please see chapter 18.1 on page 52
TIP
Universal Magnetic Screw Seals ND18 available with
open and closed top
For 20mm Crimpers and Decappers please see
chapter 17 on pages 50 cont.
Any 20ml Headspace-Vial can be obtained with the appropri-
ate seal as a 2in1 KIT!
TIPTIPNEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
41
11. S
nap
Cap
Vial
s N
D18
+ N
D22
.Easy to handle and inexpensive storage vials with push-on Snap Caps.Different volumes of 5ml, 10ml, 15ml and 25ml available.Caps and Vials separately obtainable.Quickly and easily to reopen and reseal.No liners are required in the cap
11. Snap Cap Vials ND18 + ND22
11.1 Snap Cap Vials ND18 / ND22 and appropriate Snap Caps
18 09 0906 18 09 0907 20 09 0784 22 09 09085ml
Snap Cap Vial ND18,40 x 20mm,clear glass,
3rd hydrol. class
10mlSnap Cap Vial ND18,
50 x 22mm,clear glass,
3rd hydrol. class
15mlSnap Cap Vial ND22,
48 x 26mm,clear glass,
3rd hydrol. class
25mlSnap Cap Vial ND22,
65 x 26mm,clear glass,
3rd hydrol. class
100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per cardboard box 100 pcs. per PP-Box
18 08 0913 18 08 0913 22 08 0794 22 08 079418mm PE Snap Cap,
19.8 x 5.2mm,transparent,closed top,for ND18
18mm PE Snap Cap,19.8 x 5.2mm,
transparent,closed top,for ND18
22mm PE Snap Cap,23.5 x 5.5mm,
transparent,closed top,for ND22
22mm PE Snap Cap,23.5 x 5.5mm,
transparent,closed top,for ND22
100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag 100 pcs. per PE-Bag
The vials are preferentially used on instruments of the following manu- facturers: Agilent, Dionex, Shimadzu, Tekmar, Thermo, Varian (Please have a look at the autosampler compatibility chart on pages 68-75 to see on which models they can be used)
.Broad range of EPA Vials in clear and amber glass.Volumes of 20ml, 30ml, 40ml and 60ml available.All types of EPA Vials can be delivered against a small surcharge with a certificate of cleanliness that might especially be needed for TOC analysis. A copy of our certificate of cleanliness is shown under the point “Technical Information” on our website..EPA Vials can be obtained with any type of Screw Seal ND24 already screwed on (see also chapter 18.2 “Pre-Screwed/Pre-Crimped Vials”)
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
42
Upon special request also available pre-screwed with a seal of your choice.
12.1 Screw Neck Vials ND24 (EPA)
24 09 0589 24 09 0927 24 09 0839 24 09 0923 24 09 0402 24 09 0928 24 09 1089 24 09 109020ml
EPA Screw Neck Vial,57 x 27.5mm,
clear glass,1st hydrol. class
20mlEPA Screw Neck Vial,
57 x 27.5mm,amber glass,
1st hydrol. class
30mlEPA Screw Neck Vial,
72.5 x 27.5mm,clear glass,
1st hydrol. class
30mlEPA Screw Neck Vial,
72.5 x 27.5mm,amber glass,
1st hydrol. class
40mlEPA Screw Neck Vial,
95 x 27.5mm,clear glass,
1st hydrol. class
40mlEPA Screw Neck Vial,
95 x 27.5mm,amber glass,
1st hydrol. class
60mlEPA Screw Neck Vial,
140 x 27.5mm,clear glass,
1st hydrol. class
60mlEPA Screw Neck Vial,
140 x 27.5mm,amber glass,
1st hydrol. class
100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box
12. Screw Neck ND24 (EPA)
12. S
crew
Nec
k N
D24
(EPA
)
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
43
Art. No. Description Cap Septa Material Durometer Thickn.
24 15 1394 Polypropylene Screw Cap white, 12.5mm centre hole Butyl red/PTFE grey 55° shore A 2.5mm24 15 1395 Polypropylene Screw Cap white, closed top Butyl red/PTFE grey 55° shore A 2.5mm24 15 1163 Polypropylene Screw Cap white, 12.5mm centre hole Silicone natural/PTFE beige (EPA-Quality) 45° shore A 3.2mm24 15 1540 Polypropylene Screw Cap white, closed top Silicone natural/PTFE beige (EPA-Quality) 45° shore A 3.2mm24 15 1007 Polypropylene Screw Cap white, closed top PTFE/EPDM/PTFE 65° shore A 2.0mmFurther Screw Seals ND24 with closed/open top are available upon request!
12.2.2 UltraBondTM Seals ND24 (Cap + Liner form an unseparatable unit, so that the liner cannot fall out)
Art. No. Description Cap Septa Material Durometer Thickn.
24 04 0842 PP Screw Cap white, 15mm centre hole Silicone natural/PTFE beige (EPA-Quality) 45° shore A 3.2mm24 04 0841 PP Screw Cap white, closed top Silicone natural/PTFE beige (EPA-Quality) 45° shore A 3.2mm
12.3 Septa 22mm 12.4 PP Screw Caps ND24
24 08 0403 24 08 0592Polypropylene
Screw Cap,white,
12.5mm centre hole
PolypropyleneScrew Cap,
white,closed top
100 pcs. per PE-Bag 100 pcs. per PE-Bag
22 02 1390 22 02 1393 22 02 1108 22 02 0409 22 02 0487Butyl red/PTFE grey,
55° shore A, 1.6mm
(only unassembled)
Butyl red/PTFE grey,55° shore A,
2.5mm
Silicone natural/PTFE beige, 45° shore A,
3.2mm,EPA-Quality
Silicone white/PTFE blue,
55° shore A, 1.5mm,
cross-slitted
Silicone white/Aluminium Foil silver,
50° shore A, 3.0mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Packaging Unit: 100 pcs. per PE-Bag
Art. No. Description Vial Description of Screwed-on Seal
24 14 0976 40ml Screw Neck Vial, 95 x 27.5mm, clear glass, 1st hydrolytic class, EPA (24 09 0402)
PP Screw Cap, white, centre hole, Silicone natural/PTFE beige, 45° shore A, 3.2mm (24 15 1163)
24 14 1094 40ml Screw Neck Vial, 95 x 27.5mm, amber glass, 1st hydrolytic class, EPA (24 09 0928)
PP Screw Cap, white, centre hole, Silicone natural/PTFE beige, 45° shore A, 3.2mm (24 15 1163)
24 14 1278 60ml Screw Neck Vial, 140 x 27.5mm, clear glass, 1st hydrolytic class, EPA (24 09 1089)
PP Screw Cap, white, centre hole, Silicone natural/PTFE beige, 45° shore A, 3.2mm (24 15 1163)
24 14 1621 40ml Screw Neck Vial, 95 x 27.5mm, clear glass, 1st hydrolytic class, EPA (24 09 0402)
PP Screw Cap, white, centre hole, Silicone natural/PTFE beige (EPA-Quality), 45° shore A, 3.2mm (24 04 0842)
24 14 1538 40ml Screw Neck Vial, 95 x 27.5mm, clear glass, 1st hydrolytic class, EPA (24 09 0402)
PP Screw Cap, white, closed top, Silicone natural/PTFE beige (EPA-Quality), 45° shore A, 3.2mm (24 04 0841)
24 14 1354 60ml Screw Neck Vial, 140 x 27.5mm, clear glass, 1st hydrolytic class, EPA (24 09 1089)
PP Screw Cap, white, centre hole, Silicone natural/PTFE beige (EPA-Quality), 45° shore A, 3.2mm (24 04 0842)
Further Screw Neck Vials ND24 with screwed-on open top/closed top Screw Seals are available upon request!Packaging Unit: 100 pcs. per PP-Box
.Ready to use combination seals; no time-consuming and “tricky” assembly.No contamination of the liner with sweat/fat that normally is caused by manual assembly.Available as closed top screw seals or with centre hole in white 24-400 caps.Broad variety of different septa materials for almost all applications.Also UltraBondTM Seals ND24 are offered, i.e. that the cap and the Silicone/PTFE liner of these seals form an unseparateable unit avoiding the problem of liners falling out of the cap. This 100% firm fit of the liner is achieved by a patented process that requires no adhesives, but instead changes the molecular structure of both components to achieve the fixation .Also pre-sealed vials are available!
NEW
12.2 PP Screw Seals ND24
12.2.1 PP Screw Seals ND24 (assembled)
12.5 Specially assembled EPA Vials with Screw Seals ND2412
. Scr
ew N
eck
ND2
4 (E
PA)
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
44
13. 9
6 Po
sitio
n Bl
ock
Syst
ems
.96 Position Block Systems (RITTER) with Glass Inserts are used in combinatorial chemistry when the pure PP Block is not inert enough..These Inserts that are custom-tailored to fit a broad variety of 96 Well Blocks of Messrs. RITTER can either be sealed individually with a PE Cap Seal or over the whole block with a SealmatTM block cover..The products can be obtained as individual components or as completely assembled, ready-to-use convenience blocks.
13.1 96 Position Block Systems with Glass Inserts, sealed individually
08 20 0897 08 20 0911 08 20 0905 08 20 0943Deep Well Block “riplate”, PP, 96 positions(RITTER), filled with 0.35ml Micro-Insert, 42.5 x 6mm, clear glass, 1st hydrol. class,
17mm top, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre
hole, Silicone white/PTFE red, with slit,45° shore A, 1.9mm
08 05 0890 + 08 14 0889
Square Well Block “riplate”, PP, 96 positions(RITTER), filled with 1ml Micro-Insert,
45.9 x 7.6mm, clear glass, 1st hydrol. class, round bottom, with assembled
9mm PE Cap red, 9 x 5.9mm, 4mm centrehole, Silicone white/PTFE red, with slit,
45° shore A, 1.9mm
08 05 0894 + 08 14 0910
Micro-Tube-Rack-System, PP, 96 positions(RITTER), filled with 0.8ml Micro-Insert,
40 x 7.6mm, clear glass, 1st hydrol. class, U-shaped bottom, with assembled
8mm PE-Plug blue
08 05 0895 + 08 14 0904
Microtiter-Plate, PP, 96 positions(RITTER), filled with 0.1ml Micro-Insert,
15.5 x 5.7mm, clear glass, 1st hydrol. class, flat bottom, with assembled
9mm PE Cap red, 9 x 5.9mm, 4mm centrehole, Silicone white/PTFE red, with slit,
45° shore A, 1.9mm
08 05 0944 + 08 14 0876
1 pc. shrink-wrapped 1 pc. shrink-wrapped 1 pc. shrink-wrapped 1 pc. shrink-wrapped
08 14 0889 08 14 0910 08 14 0904 08 14 08760.35ml DW-Micro-Insert, 42.5 x 6mm,clear glass, 1st hydrol. class, 17mm top,
with assembled 9mm PE Cap red, 9 x 5.9mm, 4mm centre hole, Silicone white/PTFE red,
with slit,45° shore A, 1.9mm
08 09 0888 + 09 15 0763
1ml SQW-Micro-Insert, 45.9 x 7.6mm,clear glass, 1st hydrol. class, round bottom,
with assembled 9mm PE Cap red, 9 x 5.9mm, 4mm centre hole, Silicone white/PTFE red,
with slit,45° shore A, 1.9mm
08 09 0909 + 09 15 0763
0.8ml MTRS-Micro-Insert, 40 x 7.6mm,clear glass, 1st hydrol. class, U-shaped bottom,
with assembled 8mm PE-Plug blue
08 09 0903 + 08 08 0902
0.1ml MTP-Micro-Insert, 15.5 x 5.7mm,clear glass, 1st hydrol. class, flat bottom,
with assembled 9mm PE Cap red, 9 x 5.9mm, 4mm centre hole, Silicone white/PTFE red,
with slit,45° shore A, 1.9mm
08 09 0875 + 09 15 0763
10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box
13. 96 Position Block Systems
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
45
13. 9
6 Po
sitio
n Bl
ock
Syst
ems
.SealmatTM Block covers are made out of Silicone and laminated with a deep-drawn PTFE-Film - like a septa. By laminating the cover with a PTFE-Film instead of spraying it with PTFE it is ensured that a continuous and homogeneous barrier protects the sample from any contamination before, during and after the penetration process.
.The specially designed Micro-Inserts that go along with this seal- ing system are a little bit higher than the block, so that they are easly exchangeable. They fit into the RITTER Square Well Block and are suitable for volumes up to 1ml. The conical top of the Insert allows collection of even very small sample volumes by the needle. Their wide opening reduces the building of vacuum and so avoids sample loss when removing the SealmatTM block cover.
.The SealmatTM is available in three versions for different applications: - with welled plugs for easy penetration during analysis - with welled plugs and slit for pipettes and for avoiding vacuum in the insert in case of multiple injections - with solid plugs for sample storage
08 09 0888 08 09 0909 08 09 0903 08 09 08750.35ml DW-Micro-Insert, 42.5 x 6mm,clear glass, 1st hydrol. class, 17mm top
1ml SQW-Micro-Insert, 45.9 x 7.6mm,clear glass, 1st hydrol. class, round bottom
0.8ml MTRS-Micro-Insert, 40 x 7.6mm,clear glass, 1st hydrol. class, U-shaped bottom
0.1ml MTP-Micro-Insert, 15.5 x 5.7mm,clear glass, 1st hydrol. class, flat bottom
10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box
09 15 0763 09 15 0763 08 08 0902 09 15 07639mm PE Cap red, 9 x 5.9mm, 4mm centre
hole, Silicone white/PTFE red, with slit,45° shore A, 1.9mm
9mm PE Cap red, 9 x 5.9mm, 4mm centrehole, Silicone white/PTFE red, with slit,
45° shore A, 1.9mm
8mm PE-Plug blue 9mm PE Cap red, 9 x 5.9mm, 4mm centrehole, Silicone white/PTFE red, with slit,
45° shore A, 1.9mm
96 pcs. per PE-Bag 96 pcs. per PE-Bag 96 pcs. per PE-Bag 96 pcs. per PE-Bag
08 05 0890 08 05 0894 08 05 0895 08 05 0944Deep Well Block “riplate”,
Polypropylene,96 positions (RITTER)
Square Well Block “riplate”,Polypropylene,
96 positions (RITTER)
Micro-Tube-Rack-System,Polypropylene,
96 positions (RITTER)
Microtiter-Plate,Polypropylene,
96 positions (RITTER)
10 pcs. per carton 10 pcs. per carton 10 pcs. per carton 10 pcs. per carton
13.2 96 Position Block Systems with Glass Inserts, sealed with a Sealmat TM Block Cover
13.1 96 Position Block Systems with Glass Inserts, sealed individually (cont.)
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
46
13. 9
6 Po
sitio
n Bl
ock
Syst
ems
13.2 96 Position Block Systems with Glass Inserts, sealed with a Sealmat TM Block Cover (cont.)
08 20 1171 08 20 1181 08 20 1182
Square Well Block “riplate”, PP, 96 positions(RITTER), filled with
1ml Micro-Insert, 45 x 7.6mm, clear glass, 1st hydrol. class, 8mm top, covered with
SealmatTM 08 29 1082(welled plugs for easy penetration)
08 05 0894 + 08 09 1081 + 08 29 1082
Square Well Block “riplate”, PP, 96 positions(RITTER), filled with
1ml Micro-Insert, 45 x 7.6mm, clear glass, 1st hydrol. class, 8mm top, covered with
SealmatTM 08 29 1107(welled plugs + slit for pipettes)
08 05 0894 + 08 09 1081 + 08 29 1107
Square Well Block “riplate”, PP, 96 positions(RITTER), filled with
1ml Micro-Insert, 45 x 7.6mm, clear glass, 1st hydrol. class, 8mm top, covered with
SealmatTM 08 29 1148(solid plugs for sample storage)
08 05 0894 + 08 09 1081 + 08 29 1148
1 pc. per PE-Bag 1 pc. per PE-Bag 1 pc. per PE-Bag
08 29 1082 08 29 1107 08 29 1148
SealmatTM Block coverSilicone nat./PTFE blue transp.,
with welled plugs for easy penetration
SealmatTM Block coverSilicone nat./PTFE blue transp.,
with welled plugs + slitfor pipettes
SealmatTM Block coverSilicone nat./PTFE blue transp.,
with solid plugs for sample storage
1 pc. per PE-Bag 1 pc. per PE-Bag 1 pc. per PE-Bag
08 09 1081 08 09 1081 08 09 1081
1ml SQW Micro-Insert,45 x 7.6mm, clear glass,
1st hydrol. class,8mm top
1ml SQW Micro-Insert,45 x 7.6mm, clear glass,
1st hydrol. class,8mm top
1ml SQW Micro-Insert,45 x 7.6mm, clear glass,
1st hydrol. class,8mm top
10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box 10 x 96 pcs. per PP-Box
08 05 0894 08 05 0894 08 05 0894
Square Well Block “riplate”,Polypropylene,
96 positions (RITTER)
Square Well Block “riplate”,Polypropylene,
96 positions (RITTER)
Square Well Block “riplate”,Polypropylene,
96 positions (RITTER)
10 pcs. per carton 10 pcs. per carton 10 pcs. per carton
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
47
14. P
roFi
llTM H
PLC
Syrin
ge F
ilter
s
The ProFillTM HPLC Syringe Filters are suitable best for sample volumes of 1.5ml up to 100ml, as sample retention can be reduced down to < 0.1ml, if you press with air after filtration. The effective filter area of 3.7cm2 allows a quicker filtration as for example with 13mm filters.
The ultrasonic-welded Polypropylene housing of the ProFillTM Syringe Filters ensures high pressure resistance. The membrane is fixed in the housing in such a way that a by-passing of the sample liquid is impossible. The colour-coding enables easy identifi-cation of the filter’s membrane type.
Due to their Luer-Lock-Inlet (female) an easy and safe installation of the filter on the syringe is guaranteed. The outlet is designed as Luer-Slip (male). All ProFillTM Syringe Filters are HPLC certified, i.e. only highly purified components are used in the manu-facturing process. Thorough quality controls before and after the manufacturing proc-ess guarantee a constantly high quality of the membrane material as well as of the complete filter unit. The ProFillTM Syringe Filters are packed with 100 pieces in a blue recloseable PP-Box.
14. ProFill TM HPLC Syringe Filters and ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
14.1 ProFill TM HPLC Syringe Filters
25 16 0346 25 16 0347 25 16 0348 25 16 0349 25 16 0350 25 16 0351ProFillTM
25mm HPLC Syringe Filter,PTFE, green,
0.20µm
ProFillTM
25mm HPLC Syringe Filter,PTFE,
natural,0.45µm
ProFillTM
25mm HPLC Syringe Filter,Regenerated Cellulose (RC),
blue,0.20µm
ProFillTM
25mm HPLC Syringe Filter,Regenerated Cellulose (RC),
yellow,0.45µm
ProFillTM
25mm HPLC Syringe Filter,Nylon (PA), bright blue,
0.20µm
ProFillTM
25mm HPLC Syringe Filter,Nylon (PA),
bright green,0.45µm
100 pcs. per PE-Bagadd. packed in a blue PP-Box
100 pcs. per PE-Bagadd. packed in a blue PP-Box
100 pcs. per PE-Bagadd. packed in a blue PP-Box
100 pcs. per PE-Bagadd. packed in a blue PP-Box
100 pcs. per PE-Bagadd. packed in a blue PP-Box
100 pcs. per PE-Bagadd. packed in a blue PP-Box
Hydrophobic(water repellent)
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
chemically high resistant
for organic solutions,agressive acids and bases
or cryo liquids
Hydrophobic(water repellent)
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
chemically high resistant
for organic solutions,agressive acids and bases
or cryo liquids
Hydrophilic
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
good moistening properties,wet durable
for aqueous and organicmedia, not suitable for
agressive acids and bases
Hydrophilic
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
good moistening properties,wet durable
for aqueous and organicmedia, not suitable for
agressive acids and bases
Hydrophilic
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
high mechanical stability,i.e. wet + dry durable
for aqueous and organicmedia (often used for pharmac. application)
Hydrophilic
Sample Retention < 0.1mlPressure Rating: 500kPa
(= 5bar = 72psi)Effective Filter Area: 3.7cm2
Luer-Lock-Inlet (female)Luer-Slip (male)
high mechanical stability,i.e. wet + dry durable
for aqueous and organicmedia (often used for pharmac. application)
Acetic acid (10%/25%/100%), Acetic acid anydride, Acetone, Alu-minium chloride, Ammonia (1 M/6 M), Ammonium fuoride, Amyl acetate, Benzaldehyde, Benzoic acid, Benzol, Boric acid, Bromine, i-Butanol, n-Butanol, Butyric acid, Butyl acetate, Carbonic acid, Carbon tetrachloride, Chloramine, Chlorobenzene, Chloroacetic acid, Cresol, Chromic acid, Cyclohexane, Cyclohexanol, Cyclohexanone, Diethyl acetmide, Diethyl-eneglycol, Dimethyl acetamide, Dimethyl formamide, Dimethyl sulfoxide, Ethanol < 98%, Ethyl acetate, Ethylene glycol, Ethylglycol, Formaldehyde (30%), Formic acid (25%/conc.), Heptane, Hexane, 1-Hexanol, Hydro-chloric acid (25%/conc.), Hydrogen peroxide (30%), Hydrogen sulphide, Magnesium hydroxide, Methanol, Methyl acetate, Methylene chloride, Methyl glycol, Nitric acid (25%), Nitrobenzene, Oleic acid, Oxalic acid, Paraffin, Pentane, Perchloroethylene, Perchloric acid (1 M), Petroleum ether, Phenol, Phosphoric acid (25%/45%/conc.), Potassium hydroxide (1 M/6 M), i-Propanol, n-Propanol, Propyl acetate, i-Propyl acetate, Propylene glycol, i-Propyl ether, Sodium hydroxide (1 M/6 M), Sodium hypochlorite (20%), Saline solutions (aqueous), Sulphuric acid (25%), Terpentine, Tetra-chloroethane, Tetralin, Toluene, Trichloroacetic acid (10%), Trichloroethane, Trichloroethylene, Urea, Xylene
Acetic acid (10%/25%), Acetone, Acetronitrile, Aluminium chloride, Ammonia(1 M) Ammonium fluoride, Amyl acetate, Benzaldehyde, Benzoic acid, Benzol, Boric acid, i-Butanol, n-Butanol, Butyric acid, Butyl acetate, Butyl cellosolve,Carbonic acid, Carbon tetrachloride, Chloramine, Chlorobenzene, Chloroform, Chromic acid, Cyclohexane, Cyclohexanol, Cycloheanone, Diethyl acetamide, Diethyleneglycol, Diethyether, Dimethyl acetamide, 1.4-Dioxan, Ethanol < 98%, Ethyl acetate, Ethylene glycol, Ethylglycol, Formic acid (25%), Heptane, Hexane, Hydrochloric acid (25%), Hydrogen peroxide (30%), Hydrogen sulphide, Methanol, Methyl acetate, Methylene chloride, Methyl glycol, Nitric acid (25%/conc.), Per-chloroethylene, Perchloric acid (1 M), Phosphoric acid (25%), i-Propanol, n-Propanol, Propyl acetate, i-Propyl acetate, Propylene glycol, i-Propyl ether, Saline solutions (aqueous), Sulphuric acid (25%), Tetrachloroethane, Tetrahydrofuran, Toluene, Trichloroacetic acid (10%),Trichloroethylene, Urea, Xylene
Acetone, Acetronitrile, Ammonium hydroxide (3N/6N), Amyl acetate, Amyl alcohol, Benzol, Butanol, Butyl acetate, Chloroform, Diethyl aceta-mide, Diethylether, Dimethyl formamide, Dimethyl sulfoxide, 1.4-Dioxan, Ethanol , Ethyl acetate, Ethylene dichloride, Ethylene glycol, Formaldehyde (37%/4%), Glycerol, Hexane (dry), Kerosene, Methanol, Methyl acetate, Potassium hydroxide (3N), i-Propanol, i-Propylacetate, Sodium hydroxide (1N), Tetrachloro carbonide, Tetrahydrofuran, Toluene, Urea, Xylene
NEW
The indications on chemical resistance are only empirical data without any guarantee. Substances that are not indicated are either not suitable for the membrane material or there is no empirical data available.
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
48
14. P
roFi
llTM H
PLC
Syrin
ge F
ilter
s
14.2 ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
The new ProFill TM PLUS HPLC Syringe Filters with Glass Fibre Prefilter are available with four different membrane types in two pore sizes. They have the following addi-tional advantages in comparison to the standard ProFill TM Syringe Filters..The Glass Fibre Prefilter prevents blockage/bursting of the actual membrane in
case of particle-loaded media, as a prefiltration of the biggest particles is done already by the glass fibre membrane with a pore size of 1-2µm..The additional injection-moulded ring around the housing increases the pressure resistance of the filter unit (Pressure rating: 7bar = 700kPa) and improves the fixation of prefilter and membrane in the housing, so that a by-passing of sample liquid is impossible..The additional print of the appropriate membrane type and pore size on the filter
excludes possible confusions in usage and thus increases product safety..Besides the membrane types of the standard ProFill TM HPLC Syringe Filters (Regen-erated Cellulose, Nylon(PA), PTFE), filters with prefilter are also available with a PVDF membrane with pore size 0.2µm resp. 0.45µm.
25 16 1546 25 16 1547 25 16 1548 25 16 1549 25 16 1550 25 16 1551 25 16 1552 25 16 1553ProFillTM PLUS
25mmHPLC Syringe Filter,
Glass Fibre Prefilter/PTFE,0.2µm
Injection-moulded ring
green+
Print of themembrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
PTFE,0.45µm
Injection-moulded ring
natural+
Print of themembrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
Regenerated Cellulose (RC)
0.2µm
Injection-moulded ring
blue+
Print of themembrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
Regenerated Cellulose (RC)
0.45µm
Injection- moulded ring
yellow+
Print of themembrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
Nylon (PA),0.2 µm
Injection-moulded ringbright blue
+Print of the
membrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
Nylon (PA),0.45µm
Injection-moulded ringbright green
+Print of the
membrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
PVDF,0.2µm
Injection- moulded ring
orange+
Print of themembrane type
ProFillTM PLUS25mm
HPLC Syringe Filter,Glass Fibre Prefilter/
PVDF,0.45µm
Injection-moulded ring
red+
Print of themembrane type
Packaging: 100 pcs. per PE-Bag, add. packed in a blue PP-Box
Hydrophobic(water repellent)
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophobic(water repellent)
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
Hydrophilic
Sample Retention: 0.3mlPressure Rating: 700kPa
(= 7bar = 101psi)Effective
Filter Area: 3.14cm2
Luer-Lock-Inlet(female)Luer–Slip
(male)
For indications with regard to the application areas and chemical resistances please have a look at page 47 in the chapter of our standard ProFillTM HPLC Syringe Filters.
NEW
PLUS
Art. No. Description Filter Packaging Unit
25 16 1587 ProFillTM PLUS25mmHPLC Syringe Filter, Glass Fibre, 1-2 µm,Injection-moulded ring lilac+ print of the membrane type for the filtration of big particles
100 pcs. per PE bag, add. packed in a blue PP-Box
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
49
07 18 0935 09 18 0936 10 18 0937 11 18 0938 12 18 0939 17 18 0940
Shimadzu Plug,transparent
9.5mmUniversal HT
Injection Port Septa,transparent
10mmUniversal HT
Injection Port Septa,transparent
11mmUniversal HT
Injection Port Septa,transparent
12.5mmUniversal HT
Injection Port Septa,transparent
17mmUniversal HT
Injection Port Septa,transparent
25 pcs. in anamber Screw Neck Vial
25 pcs. in anamber Screw Neck Vial
25 pcs. in anamber Screw Neck Vial
25 pcs. in anamber Screw Neck Vial
25 pcs. in anamber Screw Neck Vial
25 pcs. in anamber Screw Neck Vial
Shimadzu, all models Agilent (HP),5700/5880 Series
Varian,Injector Type: Packed Columns
Varian (CP),all modelsTracor,550, 560
Gow-Mac,all models
Finnigan,9001, QCQTM, GCQTM,
TraceTM2000Antek
Unicam, 4600
Agilent (HP),5890/6890 Series5700/5880 Series
Varian,Injector Type: Packed Columns
Injector Type: Split/Splitless
Agilent (HP),5890/6850/6890 Series,
5700/5880 Series,5880A SeriesVarian,
3300, 3400,3500, 3600,
3700, Vista (Split/Splitless)
Gow-Mac,6890 Series
Perkin Elmer,Sigma Series,
900, 9908000 SeriesAutosys (XL)
Tracor,220, 222
ThermoQuest,Trace
Fisons/Carlo Erba8000 SeriesFinnigan,
GCQ w/TraceTM
02 17 0472 02 17 0473For precise connections of Fused-Silica
Capillary Columns in GC
Universal Capillary Connectors connectall columns with an
inner diameter of 0.20 - 0.53mmand an outer diameter of 0.30 - 0.75mm
Universal Capillary Connector
for 2 columns
Universal Y-Capillary Connector
for 3 columns
10 pcs. per PP-Box 1 pc. per PP-Box
.Universal, longlife GC-Septa
.Suitable for inlet temperatures of up to 340°C
.Low bleeding (release of Siloxanes)
.Good penetration and sealing properties (low fragmentation)
.Long lifetime
.No sticking to hot surfaces, so easily exchangeable
.Ready-to-use; no further pre-treatment necessary
.Packed with 25 pieces in a resealable amber Screw Neck Vial of 1st hydrol. class
.Available for all common gas chromatographs; compatibility as shown below
15. GC Injection Port Septa
16. GC Capillary Connectors
15. G
C In
ject
ion
Port
Sep
ta/1
6. C
apill
ary
Conn
ecto
rs
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
50
An inappropriate crimp cannot be recognized by trying to turn the Seal, as completely PTFE-laminated liners have a very slippery surface on the glass rim, which allows anyone to turn the cap, if the right torque is used.
The turning of the cap is even easier when the liner is sitting on a Headspace (bevelled top) glass rim, as it then only has very small
surface to rest on.
Correct Crimp
Flat cap surface
Flat septa surface
Tight fitting of the Aluminium edge
Plain + undeformed cap sides
Untight Aluminium edge
Upward bulge ofthe crimp cap
Deformation ofthe crimp cap sides
Convex looking liner Rounded edges/Upwardbulge of the Cap/Liner
Adjust crimpingpressure with the
screw in the handle+
Adjust crimpingheight with thehexogen key
(s. below)
(undercrimped)
Adjust crimpingpressure with the
screw in the handle+
Adjust crimpingheight with thehexogen key
(s. below)
(overcrimped)
Adjust crimpingheight with thehexogen key
(s. below)
(overcrimped)
Adjust crimpingpressure with the
screw in the handle
(overcrimped)
Especially with Headspace Caps it is important not to overcrimp them. If the Aluminium is stretched too much under the crimp neck, the
bridges of the scorelines suffer too much stress and can break open at even low pressure (below 3 bars) or - in worst case - can even tear
apart beside the scorelines(overcrimped)
An inappropriate crimp can be recognized by:
17.1 Manual Crimping Tools
08 06 0005 11 06 0006 13 06 0007 20 06 0008 28 06 0320 32 06 0135
Crimper for8mm Aluminium Caps
Crimper for11mm Aluminium Caps
Crimper for13mm Aluminium Caps
Crimper for20mm Aluminium Caps
Crimper for28mm Aluminium Caps
Crimper for32mm Aluminium Caps
1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box
.Easy and convenient handling.Chemically resistant surface finish especially designed for the application in labs.Hardened crimping jaws made of a special alloy that guarantees long life.Adjustable in crimping pressure limitation by a screw in the handle.Additionally 11mm, 13mm and 20mm crimpers are adjustable in crimping height by screwing up or down the pressure block in the crimping head with a hexagon key
17. Crimping Tools
17. C
rimpi
ng To
ols
You can download the appropriate instruction for the adjustment of our crimpers from our Website as PDF-File. (Icon “Products”; Subchapter ”Crimping Tools”)
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
51
13 06 0069 13 06 0319 20 06 0043 20 06 0170 28 06 0190
Crimper for 13mm Flip Top/Flip Off Seals
Crimper for 13mm Flip Tear Up Seals
Crimper for 20mm Flip Top/Flip Off Seals
Crimper for 20mm Flip Tear Up Seals
Crimper for 28mm Flip Top/Flip Off Seals
Special sizes and Crimpers for Pump Spray Closures on request!
1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box
17.1 Manual Crimping Tools (cont.)
08 07 0001 11 07 0002 13 07 0003 20 07 0004 28 07 0092 32 07 0078
Decapper for8mm Aluminium Caps
Decapper for11mm Aluminium Caps
Decapper for13mm Aluminium Caps
Decapper for20mm Aluminium Caps
Decapper for28mm Aluminium Caps
Decapper for32mm Aluminium Caps
1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box 1 pc. per PP-Box
17.2 Manual Decapping Tools
17.3 Pneumatic Hand-held Crimping Tool
08 06 0149 11 06 0150 13 06 0134 20 06 0088 32 06 0151
Crimping Head for8mm Aluminium Caps
Crimping Head for11mm Aluminium Caps
Crimping Head for13mm Aluminium Caps
Crimping Head for20mm Aluminium Caps
Crimping Head for32mm Aluminium Caps
1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton
13 06 0091 20 06 0090 20 06 0148 28 06 0191 32 06 0192
Crimping Head for13mm Flip Top/Flip Off Seals
Crimping Head for20mm Flip Top/Flip Off Seals
Crimping Head for 20mm FlipTear Up Seals
Crimping Head for28mm Flip Top/Flip Off Seals
Crimping Head for32mm Flip Top/Flip Off Seals
1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton
Special sizes on request!
17.4 Crimping Heads for Pneumatic Hand-held Crimping Tool
00 00 0089 00 00 0120
Basic pneumatic crimping tool incl.- pressure regulator
- safety valve- teflon hose coated with stainless steel
Hanging devicewith balancer
1 pc. per carton 1 pc. per carton
08 07 0153 11 07 0107 13 07 0154 20 07 0155 28 07 0156 32 07 0157
Decapping Head for8mm Aluminium Caps
Decapping Head for11mm Aluminium Caps
Decapping Head for13mm Aluminium Caps
Decapping Head for20mm Aluminium Caps
Decapping Head for28mm Aluminium Caps
Decapping Head for32mm Aluminium Caps
1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton 1 pc. per carton
17.5 Decapping Heads for Pneumatic Hand-held Crimping Tool
You can download the appropriate instruction for the handling of our Pneumatic Crimping Tool from our Website as PDF-File. (Icon “Products”; Subchapter ”Crimping Tools”)
17. C
rimpi
ng To
ols
.Crimping and decapping tool, operated by compressed air (6.2bar = 90psi minimum).Easy handling; just by pushing the button the vial is crimped or decapped.Interchangeable “K”-Heads for crimping and decapping in various sizes (pls. see chapter 17.4).Adjustable and constant crimping pressure.Space-saving installation with a balancer above the working bench.Ergonomical handling, as the balancer compensates the weight of the pneumatic crimper and facilitates steady and precise crimping.Air supply connector should have “N.P.T.” thread.Upon request the pneumatic crimping tool can be delivered with a stainless steel coated hose instead of the flexible Polyurethane hose.
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
52
18.2 Special Services
08 21 1000 12 21 1001 15 21 1664 24 21 1002
Vial Rack, Acrylic,173 x 95 x 20mm,50 cavities with a
diameter of 8.5/3mm
Vial Rack, Acrylic,173 x 95 x 20mm,50 cavities with a
diameter of 12mm
Vial Rack, Acrylic, 175.8 x 115.5 x 20mm
40 cavities with adiameter of 15.1mm
Vial Rack, Acrylic,160 x 160 x 30mm,
25 cavities with adiameter of 24mm
1 piece 1 piece 1 piece 1 piece
Suitable for e.g.:08 09 0258, 08 09 0284, 08 09 0305, 08 09 0606, 08 09 0845, 08 09 0953, 08 09 1080, 08 14 0513, 08 14 0595, 08 14 0641, 08 14 1168, 08 14 1169
40 09 0146
Suitable for e.g.:10 09 0743, 10 09 1196, 10 09 1197, 11 09 0210, 11 09 0259, 11 09 0356,11 09 0382, 11 09 0415, 11 09 0417,11 09 0419, 11 09 0476, 11 09 0477,11 09 0500, 11 09 0519, 11 09 0520,11 09 0619, 11 09 0620, 11 09 0627,11 09 0644, 11 09 0645, 11 09 0831,11 09 0921, 11 09 0999, 11 09 1241,11 09 1242, 11 14 0544, 11 14 0545,11 14 1189, 11 14 1190, 11 14 1655,11 14 1656, 11 19 0932, 11 19 0933,11 19 1021, 11 19 1022, 11 19 1205,
11 19 1516
Suitable for e.g.:13 09 0222, 13 09 0280, 13 09 1335, 13 09 1336, 15 14 0548, 15 14 0562
Suitable for e.g.: 18 09 0864, 18 09 0906, 18 09 0907,18 09 1306, 18 09 1307, 18 09 1310,18 09 1311, 20 09 0297, 20 09 0342, 20 09 0440, 20 09 0795, 20 09 0796, 20 09 0801, 20 09 0802, 20 09 0873, 20 09 1222, 20 09 1223, 20 09 1405,
20 09 1690, 20 09 1691
.Easy handling and transportation of sample vials.Filling visible because of transparent acrylic material.Stable standing position because of solid construction.Stack stability because of silicone base.Racks for 8mm resp. 11mm vials can even hold conically shaped sample vials.Custom-tailored vial racks can be manufactured according to customer’s specifications
18. Other Accessories or Special Services
18.1 Vial Racks
Barcode Labelling of Vials
In cases of high sample throughput often barcoded vials are requested. Through the barcode the sample can be traced from sample preparation through the whole process of analysis and identification at any point of time is guaranteed. Sample mix-ups should not occur and administration of the analysis data is kept down to a minimum.We can provide you with barcode-labelled vials. The labels withstand tempera-tures of approx. -40°C - 140 °C and have a high chemical resistance.Recommended is the so-called back side print, as the barcode is protected by the polyester film and thereby is scratch and wiping resistant. Furthermore the labels stand out by a high UV-stability.Further information on length of a possible barcode (readability by the barcode reader), etc. can be obtained any time from us.
NEW
18. O
ther
Acc
esso
ries
or S
peci
al S
ervi
ces
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
53
Pre-Screwed/Pre-Crimped VialsSometimes customers wish to obtain vials which are already crimped or screwed with a seal of their choice. For example the tobacco industry analyses the smoke of a cigarette which is injected into an already crimped vial. Also a lot of EPA Vials are bought with the appropriate closure already screwed on top of the vial.La-Pha-Pack® can provide you with any type of pre-sealed vial.
2in1 KITsTo carry out an analysis, the user always needs two components at the same time: vial and closure. To fulfill this need in a convenient way La-Pha-Pack® offer 2in1 KITs containing 100 vials and 100 seals in a blue, recloseable PP-box. All advantages of the individual items (CleanPack packaging of the vials, tamper-evident packaging of vials and seals, traceability through a batch numbering system, etc.) still remain, however they are put at the user’s disposal in a more convenient way. Furthermore the customer only has to reorder one article instead of two, which makes life more easy. The following product lines can be obtained as a 2in1 KIT:Screw Neck Vials/Seals ND8 (Chapter 2, pages 18-20 ) Short Thread Vials/Seals ND9 (Chapter 3, pages 21-23)Screw Neck Vials/Seals ND10 (Chapter 4, page 24)Crimp Neck Vials/Seals ND11 (Chapter 5, pages 25-27)Snap Ring Vials/Seals ND11 (Chapter 6, pages 28-29)Plastic Vials ND9 and Plastic Micro-Vials ND9 + ND11 (Chapter 7, Page 30)Screw Neck Vials/Seals ND13 (Chapter 8, pages 31-32)Shell Vials ND8, ND11 + ND15 with PE-Plugs (Chapter 9, pages 33-34)20ml Headspace Vials/Seals ND20 + ND18 (Chapter 10, pages 35-40)
Special PackagingOur standard packaging unit for seals is 100 pieces per PE-Bag and for liners 1,000 pieces per PE-Bag. However, our automatic counting and packaging machines are also capable to pack in any quantity a customer may request, e.g. 144 or 200 pieces per PE-Bag.
Our vials are packed with 100 pieces per PP-box by standard. However, we also offer for 1.5ml Vials to additionally pack 10 boxes of 100 pieces each into an additional PP-box as a pack of 1,000 pieces.
Special Production Runs We make special production runs for:a ) Vials: special diameters, special designs (different threads, necks, bottoms, etc.), vials with logos printed on the glass, different glass classes, etc. Minimum order quantities depend very much on availability of the glass tubing, possibly necessary extra tooling and set up time for the machinery.b ) Vial Racks: special outer dimensions, sizes of the cavities, number of cavities, distance between each cavity Minimum order quantity: approx. 20 piecesc ) Septa: special diameter, thickness or material, special form Minimum order quantity depends very much on availability of the material, punching tool and set up time for the machinery; however, normally we are fairly flexible here even for smaller order quantitiesd ) Seals: special caps or liners Minimum order quantity depends very much on availability of the requested cap and linere ) Crimpers: for special design caps (like Pump Spray Closures, for caps with special size, etc.) If technically realizable, minimum order quantity is 1 piece, however design costs may occur
Certificates, Chromatograms, QC Reports
As a DIN EN ISO 9001:2000 certified company we do a thorough quality control according to DIN/ISO standards. The results of any QC test are documented in a QC report which can be put at your disposal upon request. Furthermore some customers require (especially for TOC anaylsis) EPA Vials with a certificate of cleanliness. We have certified batches of all EPA vials on stock which have been analysed in an external lab regarding organic substances. Should you require certified EPA Vials with a print of the analysis results you have to give an appropriate indication in the order beside the article No. of the vial and we will provide you with the test results against a small surcharge. A demo version of our quality report as well as a copy of our cleanliness certificate is shown under the point “Technical Information” on our website. We can also send you a chromatogram of our UltraCleanTM seals against a small surcharge, as each manufactured batch of these septa is GC-controlled in an external lab. Information on the analysis method will also be provided.
Labelling of ProductsWe can label all products you buy from us with your own label. Either you provide us with labels we should put onto the products or you give us the design of the label and we print them out here.
18.2 Special Services (cont.)
18. O
ther
Acc
esso
ries
or S
peci
al S
ervi
ces
NEW
NEW
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
54
18 09 1704 20 09 1705 24 09 058924 09 0927
24 09 083924 09 0923
24 09 040224 09 0928
24 09 108924 09 1090
16mlScrew Neck Vial
18-400,71 x 20.6mm,
clear glass,1st hydrol. class
20mlScrew Neck Vial
20-400,86 x 22.7mm,
clear glass,1st hydrol. class
20mlScrew Neck Vial
24-400,57 x 27.5mm,
clear/amber glass,1st hydrol. class
30mlScrew Neck Vial
24-400,72,5 x 27.5mm,
clear/amber glass,1st hydrol. class
40mlScrew Neck Vial
24-400,95 x 27.5mm,
clear/amber glass,1st hydrol. class
60mlScrew Neck Vial
24-400,140 x 27.5mm,
clear/amber glass,1st hydrol. class
100 pcs. per carton 100 pcs. per carton 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box
11 09 0210 11 09 0259 13 09 0222 13 09 0280 15 09 1703 15 09 16572ml
Screw Neck Vial 8-425,
32 x 11.6m,clear glass,
1st hydrol. class
2mlScrew Neck Vial
8-425,32 x 11.6m,amber glass,
1st hydrol. class
4mlScrew Neck Vial
13-425,45 x 14.7mm,
clear glass,1st hydrol. class
4mlScrew Neck Vial
13-425,45 x 14.7mm,amber glass,
1st hydrol. class
8mlScrew Neck Vial
15-425,61 x 16.6mm,
clear glass,1st hydrol. class
12mlScrew Neck Vial
15-425,66 x 18.5mm,
clear glass,1st hydrol. class
100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per PP-Box 100 pcs. per carton 100 pcs. per carton
19. Screw Neck Vials for Storage Purposes
19. S
crew
nec
k vi
als
for s
tora
ge p
urpo
ses
.Screw Neck Vials for storage purposes made of glass of the 1st hydrol. class .Vials with different volumes are available.Amber vials partially upon request.Upon request seals with different septa material are also available
Scale
1:2
, full
-scale
s. p.
83
Scale
1:2
, full
-scale
s. p.
83
Scale
1:2
, full
-scale
s. p.
83
Scale
1:2
, full
-scale
s. p.
83
Scale
1:2
, full
-scale
s. p.
83
NEW
Seals with different septa materials are available upon request!
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
55
Art. No. Description Cap Septa Material Durometer Thickn.
13 03 1381 13mm Aluminium Cap clear lacquered, 6mm centre hole Butyl red/PTFE grey 55° shore A 2.0mm13 03 1382 13mm Aluminium Cap clear lacquered, complete tear off Butyl red/PTFE grey 55° shore A 2.0mm13 03 1383 13mm Aluminium Cap clear lacquered, centre tear off Butyl red/PTFE grey 55° shore A 2.0mm13 03 0307 13mm Aluminium Cap clear lacquered, 6mm centre hole Pharma-Fix-Septa (Butyl/PTFE) 50° shore A 2.0mm13 03 0309 13mm Aluminium Cap clear lacquered, complete tear off Pharma-Fix-Septa (Butyl/PTFE) 50° shore A 2.0mm13 03 0308 13mm Aluminium Cap clear lacquered, centre tear off Pharma-Fix-Septa (Butyl/PTFE) 50° shore A 2.0mm40 15 0674 40mm Screw Cap black, closed top PTFE virginal 53° shore D 0.5mm
Further Special Seals may be available upon request!
20.1 Special Vials
13 09 0236 13 09 0285 13 09 0949 15 09 0788 40 09 06782ml Crimp Neck Vial,
32 x 16mm,clear glass,
1st hydrolytic class
3ml Crimp Neck Vial,33 x 15mm,clear glass,
3rd hydrolytic class
8ml Flat-Bottom-Vial,84 x 13.3mm,
clear glass,3rd hydrolytical class
4ml Screw Neck Vial,38 x 16.5mm,
clear glass,1st hydrolytic class
50ml Cylindrical Jar,69.5 x 44mm,
clear glass,3rd hydrolytical class,
with Screw Neck ND40
20.2 Special Seals
20.2.1 Crimp Seals ND13
20. S
peci
al P
rodu
cts
.Special products may be vials, septa, seals or any other chromatography accessory.Special products are non-stock items and may require a minimum order quantity.In the vial chapter we would like to point out our cylindrical Jars ND40 for soil samples.In the septa chapter we would like to draw your attention to our liners for SCHOTT Screw Caps.In the seal chapter we have a broad variety of 13mm crimp seals.
20. Special Products
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
56
20.3 Special Septa
20.3.1 Septa for SCHOTT Screw Caps
12 02 0468 16 02 0469 23 02 0470 30 02 0471 43 02 0413
Further Septa invarious materials
and diametersupon request!
12.9mm Septa,Silicone cream/PTFEbeige, 55° shore A,
3.2mmfor SCHOTT Screw
Cap GL14
16.8mm Septa,Silicone cream/PTFEbeige, 55° shore A,
3.2mmfor SCHOTT Screw
Cap GL18
23.4mm Septa,Silicone cream/PTFEbeige, 55° shore A,
3.2mmfor SCHOTT Screw
Cap GL25
30.3mm Septa,Silicone cream/PTFEbeige, 70° shore A,
3.2mmfor SCHOTT Screw
Cap GL32
43.2mm Septa,Silicone cream/PTFEbeige, 55° shore A,
3.2mmfor SCHOTT Screw
Cap GL45
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 500 pcs. per PE-Bag
13 02 0474 13 02 1470 13 02 1379 13 02 1380 13 02 0261
13mm Septa,Nat. Rubber red-orange/
TEF transparent,60° shore A, 1.3mm
13mm Septa, PTFE grey/Butyl red/
PTFE grey, 55° shore A,
1.3mm
13mm Septa,Butyl red/PTFE grey,
55° shore A,1.6mm
13mm Septa,Butyl red/PTFE grey
55° shore A,2.0mm
13mm Septa,Pharma-Fix-Septa (Butyl/PTFE)
50° shore A,2.0mm
1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag 1000 pcs. per PE-Bag
20.3.2 Septa 13mm
We do a lot of special production runs in all areas of our delivery
programme.
Should you have a special request, please do not hesitate to contact us
any time.
20. S
peci
al P
rodu
cts
57
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Trademarks, Abbreviations, Explanations, Structure Article Description
UltraBondTM
La-Pha-Pack® have enlarged their range of well-known and established UltraBondTM Closures for EPA vials by various 9mm UltraBondTM Closures for short thread vials, among others also those in an improved Waters® quality. Comparable systems are offered by Agilent and Waters® as so called Interseal respectively Lectrabond closures.
The peculiarity of the UltraBondTM Seal System is that the screw cap and the liner form an unseparateable unit. Through a patented processing technique the molecular structure of the contact areas of the PP Screw Cap and the liner are changed in such a way that without usage of any glue or adhesive the components form a firm unit. Reasons for making such a seal instead of a just assem-bled cap/liner combination seal could be:
For instruments with very thick and dull needles, in order to avoid the risk of pushing the liner into the vial (9mm UltraBondTM Seals for Short Thread Vials)
For screw caps with a wide diameter, where a liner cannot achieve any press-fit in the cap (24mm UltraBondTM Seals for EPA-Vials)
.
.
Pharma-FixA Pharma-Fix-Septa is a moulded Butyl/PTFE or a Sili-cone/PTFE liner. Its PTFE lamination is only in the centre of the liner where the sample can get into contact with it. However, on the glass rims the very elastic Butyl resp. the Silicone rubber achieves a very tight seal which is essential especially in Headspace analysis. A com-pletely laminated Butyl/PTFE resp. Silicone/PTFE liner has a much more slippery surface on the glass rims, so that the tightness is not as good as with a Pharma-Fix-Septa.
riplate“riplate” is the brand name of the 96 Well Plates of Messrs. RITTER for which La-Pha-Pack® offer suitable Glass Micro-Inserts.
A ) Trademarks, Brand Names
Trad
emar
ks, A
bbre
viat
ions
, Exp
lana
tions
, Str
uctu
re A
rtic
le D
escr
iptio
n
58
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Trad
emar
ks, A
bbre
viat
ions
, Exp
lana
tions
, Str
uctu
re A
rtic
le D
escr
iptio
n
B ) Abbreviations
C ) Explanations
DW Deep Well (Type of 96 Position Block with round inlet holes)
EPA Environmental Protection Association (American regulatory authority that sets up certain standards and regulations for environmental analysis)
EPDM Ethylene Propylene Diene Monomer
GC Gas Chromatography
GMF Glass Microfibre
HPLC High Performance Liquid Chromatography
HS Headspace
MTP Microtiter (Type of 96 Position Block which is very flat and has a low volume)
MTRS Micro-Tube-Rack-System (Type of 96 Position Block with cover that is more a kind of rack with round inlet holes)
ND Nominal Diameter
PE Polyethylene
PP Polyproylene
PTFE PolyTetraFlouroEthylene
PVDF Polyvinylidenfluoride
SPME Solid Phase Micro Extraction
SQW Square Well (Type of 96 Position Block with square inlets)
TEF Tefzel (special type of PTFE which is a very thin casted Teflon)
TPX TPX (Brand name of a Methylpentene Copolymere)
Cleanroom class 10,000
Cleanroom class 10,000 represents a hygienic stand-ard often found in the pharmaceutical industry. These special rooms have certified conditions of 10,000 particles per m3 air maximum. To have a comparison: The environment in a normal room contains millions of particles. The rooms are regularly measured by external authorities to guarantee the specifications. Such rooms have no windows (air-conditioned) and only material with low particle abrasion is allowed there (Plastic instead of wood or cardboard, etc.). The people have to wear special clothing.
Durometer
Durometer is the hardness of a liner and is expressed in ° shore. The higher the grade the harder the liner; the lower the grade, the softer the liner. The softest liner is 45° shore A and the hardest 70° shore A. Besides the thickness of a liner the hardness is an essential indica-tion when deciding which liner is suitable for the pen-etration of a certain type of needle (fragile needles, thin or thick needles, sharp or dull needles, etc.)
Headspace Cap
A Headspace Cap is a safety cap for Headspace analy-sis, which should avoid explosion of the vial in case of too much internal pressure. The Headspace Cap has special score-lines with bridges that break open at an inner pressure of 3.0 ± 0.5 bar. Thus the excess pres-sure escapes and the risk of vial explosion is avoided.
Headspace Neck(bevelled top)
A Headspace Neck or Headspace Vial with bevelled top has a crimp neck whose outer edges are bevelled. In contrast to a flat DIN crimp neck the liner only has a very small surface to sit on which is a disadvantage regard-ing tightness. Headspace Necks or bevelled crimp necks are only necessary when using the patented PERKIN ELMER Pressure Release Seal consisting of an Aluminium Cap with a slit, a metal star washer plate and a liner with ears. This system only releases excess pressure reli-ably when using a vial with such a top.
Micro-Vial
Micro-Vials can be sealed, but often need an adapter to run in the autosampler. In case they have a conical bottom, they cannot stand by themselves.
Micro-Insert
A Micro-Insert in contrast to a Micro-Vial cannot be sealed on its own. It is neckless and always has to be used within a vial. The diameter of the Micro-Insert is depending on the size of the vial opening. A Micro-Insert reduces the volume, so that a needle is capable of pick-ing up even smallest sample quantities. The longer the top of an Insert the more the volume can be reduced.
59
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Silanized
Silanized vials are used to reduce the adsorption of polar compounds onto the surface of the glass container. Some compounds like aminos, proteins or phenols tend to react with the glass, even if – as is common for chro-matography – 1st hydrolytic class glass is used. Through the silanization process the glass surface is deactivated and so possible reactions between the polar compounds and the glass are eliminated.
D ) Structure Article Descriptions
D1 ) Vials
D2 ) Seals
D3 ) Septa
e.g.: 1.5ml Short Thread Vial, 32 x 11.6mm, clear glass, 1st hydrol. class, with label and filling lines
e.g.: 11mm PE Snap Ring Cap transparent, 6mm centre hole, Silicone white/PTFE blue, cross-slitted, 55° shore A, 1.0mm
e.g.: Silicone white/PTFE beige, 45° shore A, 3.25mm (AGILENT HT Quality)
Volume (realistically usable volume of a vial, not the max. volume that can be filled from bottom to the very top edge of the vial)
Type of VialDimensions (height x diameter; exact dimensions, not rounded)
Glass materialGlass class (quality)
Additional characteristics
Diameter (of the cap)Material (of the cap)
Type of CapColour of the Cap (sometimes important when using an instrument with photocells!)
Size Centre HoleLiner material + colour(s)
Additional characteristicsHardness (of the liner)
Thickness (of the liner)
Carrier Material + Colour (Important for temperature resistance, resealability in case of multiple injections, cleanliness, etc.
Type of Teflon + ColourHardness of Liner (important for the penetration of the needle)
Thickness of Liner (important for the penetration of the needle)Additional Remarks (to identify special liner qualities)
Trad
emar
ks, A
bbre
viat
ions
, Exp
lana
tions
, Str
uctu
re A
rtic
le D
escr
iptio
n
C ) Explanations (cont.)
Seal
A Seal is an already assembled closure consisting of a cap and a liner.
virginal (PTFE)
Untreated PTFE
All information are subject to technical changes!
All data concerning dimensions and volumes are approximate. Any reproduction of the catalogue’s contents or parts of it requires the approval and confirmation of LA-PHA-PACK® Werner Reifferscheidt GmbH.
Copyright of the entire catalogue including product drawings and autosampler compatibility chart as well as all other included charts (overviews): LA-PHA-PACK® Werner Reifferscheidt GmbH.
© 2006 LA-PHA-PACK® Werner Reifferscheidt GmbH.
60
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
1:1 Drawings, Vials ............................................. 5, 83, 84, 85, 862in1 KITs ............................................... 20, 23, 30, 32, 34, 37, 532in1 KITs for DIONEX (PP Vials) ................................................. 302in1 KITs for VARIAN Autosampler (1.5ml) ................................. 202in1 KITs for WATERS® (PP Vials) ............................................... 302in1 KITs with Microliter Short Thread Vials ................................. 232in1 KITs with PP Short Thread Micro-Vials ............................ 23, 302in1 KITs with Plastic Vials ND9 .................................................. 302in1 KITs with Short Thread Vials ................................................ 232in1 KITs, 20ml ......................................................................... 372in1 KITs, other (4ml Screw Neck Vials) ...................................... 322in1 KITs, Shell Vials .................................................................. 343in1 KITs for VWR (Merck®)/Hitachi + WATERS® Autosampler (4ml Screw Neck Vials) ...................................................... 323in1 KITs for VWR (Merck®)/Hitachi Autosampler (1.5ml) .......... 2096 Position Block Systems with Glass Inserts, sealed individually ...........................................................44, 4596 Position Block Systems with Glass Inserts, sealed with a SealmatTM Block cover .................................45, 46
Abbreviations .................................................................57, 58, 59Actual Size Drawings, Vials ....................................5, 83, 84, 85, 86Alphabetical Index ......................................................................60Aluminium Crimp Seals ND8 ........................................................17Aluminium Crimp Seals ND11 ......................................................26Aluminium Crimp Seals ND20 ..........................................37, 38, 39Article Number System ............................................................5, 62Assembled EPA Vials ...................................................................43Autosampler Compatibility Chart ...5, 68, 69, 70, 71, 72, 73, 74, 75
Barcode Labelled Vials ................................................................52Bimetal Cap ....................................................................11, 37, 38Butyl Crimp Seals ND20 ..............................................................37Butyl/PTFE Screw Seals ND8 .......................................................19Butyl/PTFE Screw Seals ND13 .....................................................31Butyl/PTFE Seals ND20 ...............................................................37
Capillary Connectors ...................................................................49CleanPack ....................................................................................7Combination Seals for Crimp Neck ND8 (Other ) ..........................17Combination Seals for Crimp Neck ND11 (Other) .........................27Combination Seals for Crimp Neck ND20 (Other) .........................39Company Profile .......................................................7, 8, 9, 10, 11Contacts .......................................................................................6Content ................................................................................1, 2, 3Crimp Neck Micro-Vial ND8 .........................................................16Crimp Neck Micro-Vial ND11 .......................................................25Crimp Neck Vial ND8 ..................................................................16Crimp Neck Vial ND11 ..........................................................25, 26Crimp Neck Vials ND11 (Other) ...................................................26Crimp Neck Vials ND20 (Other) ...................................................37Crimp Seals ND8 (Other) .............................................................17Crimp Seals ND11 (Other) ...........................................................27Crimpers ..............................................................................50, 51Crimping Heads ....................................................................50, 51Cross-Reference-Charts .............................5, 76, 77, 78, 79, 80, 81
Decappers ..................................................................................51Decapping Heads ........................................................................51Drawings Caps ................................................................37, 87, 88
EPA-Vials ........................................................................42, 43, 54Explanations ...............................................................5, 57, 58, 59
Filters, Glass Fibre Membrane ...............................................10, 48Filters, Nylon ..................................................................10, 47, 48Filters, PTFE ....................................................................10, 47, 48Filters, PVDF .........................................................................10, 48Filters, Regenerated Cellulose ..........................................10, 47, 48
GC-Septa ...................................................................................49General organisational matters .....................................................6General terms and conditions ........................................................6
Handling of the catalogue .............................................................5
Headspace Screw Neck Vials ND18 ....................................9, 35, 36Headspace Vials ND20 ....................................................11, 35, 36How to find the right product ........................................................5
Injection Port Septa (GC) .............................................................49
Magnetic Bimetal Crimp Seal ND20 .................................11, 37, 38Magnetic Crimp Seals ................................................27, 37, 38, 39Magnetic Crimp Seals for SPME-Vial ND20 ...................................39Magnetic Crimp Seals ND11 (for CTC) ..........................................27Magnetic Screw Seals ND18 ....................................................9, 40Manual Crimping Tools ....................................................50, 51, 53Manual Decapping Tools ..............................................................51Micro-Inserts for Crimp Neck Vials ND11 ......................................25Micro-Inserts for Screw Neck Vials ND8 ........................................18Micro-Inserts for Screw Neck Vials ND10 ......................................24Micro-Inserts for Screw Neck Vials ND13 ......................................31Micro-Inserts for Shell Vials ...................................................33, 34Micro-Inserts for Short Thread Vials ND9 ......................................21Micro-Inserts for Snap Ring Vials ND11 ........................................28Micro-Inserts for Vials with small opening ....................................18Micro-Inserts for Vials with wide opening ...................21, 24, 25, 28Microliter Vial, Crimp Neck ND11 ................................................25Microliter Vial, Short Thread ND9 ................................................21
Natural Rubber/Butyl/TEF Crimp Seals ND8 ................................17Natural Rubber/Butyl/TEF Crimp Seals ND11 ..............................26Natural Rubber/TEF Crimp Seals ND8 ..........................................17Natural Rubber/TEF Crimp Seals ND11 ........................................26Natural Rubber/TEF Screw Seals ND8 ..........................................19Natural Rubber/TEF Screw Seals ND10 ........................................24Natural Rubber/TEF Screw Seals ND13 ........................................31Natural Rubber/TEF Short Thread Seals ND9 ...............................22Natural Rubber/TEF Snap Ring Seals ND11 ..................................29New Products ...................................................................9, 10, 11Numerical Index .........................................................................61
PE-Caps for Crimp Neck ND8 .......................................................17PE-Caps for Crimp Neck ND11 .....................................................27PE-Caps for Crimp Neck ND20 .....................................................39Pharma-Fix Seals ND20 (Butyl/PTFE, Silicone/PTFE) ........11, 38, 57Plastic Micro-Vials with Glass Inserts (TopSertTM) .....9, 21, 25, 28, 30Plastic Micro-Vials, PP .................................................................30Plastic Micro-Vials, Short Thread ND9 ..........................................30Plastic Micro-Vials, Snap Ring ND11 .............................................30Plastic Micro-Vials, TPX ................................................................30Plastic Vials ......................................................................9, 21, 30Pneumatic Crimping Tool .............................................................51Preface ................................................................................4, 5, 6Pre-Screwed/Pre-Crimped Vials .............................................43, 53ProFill TM ...............................................................................47, 57ProFill TM HPLC Syringe Filters ................................................47, 57ProFill TM PLUS – HPLC Syringe Filters
with Glass-Fibre Prefilter ....................................10, 48, 57PP Short Thread Vials ND9 ................................................9, 21, 30Push-On Cap (PE) ND8 ....................................................10, 17, 87Push-On Cap (PE) ND11 ............................................10, 27, 29, 87
Quick-Reference-Charts ...................................5, 63, 64, 65, 66, 67
Screw Caps ND8 (PP) ..................................................................20Screw Caps ND10 (PP) ................................................................24Screw Caps ND13 (PP) ................................................................32Screw Caps ND18 (PP) ................................................................40Screw Caps ND24 (PP) ................................................................43Screw Neck Micro-Vials ND8 ........................................................18Screw Neck Vials for Storage Purposes ...................................11, 54Screw Neck Vials ND8 ...........................................................18, 54Screw Neck Vials ND10 ...............................................................24Screw Neck Vials ND13 .........................................................31, 54Screw Neck Vials ND15 ...............................................................54Screw Neck Vials ND18 .........................................................36, 54Screw Neck Vials ND20 ...............................................................54Screw Neck Vials ND24 ...................................................42, 43, 54Screw Seals ND8 (PP) .................................................................19
Screw Seals ND10 (PP) ...............................................................24Screw Seals ND13 (PP) ...............................................................31Screw Seals ND18 (PP) ...............................................................40Screw Seals ND24 (PP) .........................................................10, 43SealmatTM .......................................................................45, 46, 57Seals for Plastic Micro-Vials .......................................22, 26, 27, 29Septa 8mm ................................................................................20Septa 10mm ..............................................................................24Septa 11mm ..............................................................................27Septa 12mm ..............................................................................32Septa 13mm ..............................................................................56Septa 16mm ..............................................................................40Septa 19.5mm ...........................................................................39Septa 20mm ..............................................................................39Septa 22mm ..............................................................................43Shell Vials .............................................................................33, 34Short Thread Micro-Vials ND9 ......................................................21Short Thread Seals ND9 (PP), black cap ...................................... 22Short Thread Seals ND9 (PP), blue cap ........................................22Short Thread Seals ND9 (PP), red cap ......................................... 22Short Thread Seals ND9 (PP), transp. cap ....................................22Short Thread UltraBondTM Seal ND9 .................................10, 22, 57Short Thread Vials ND9 ...............................................................21Short Thread Vials ND9 (PP) ..............................................9, 21, 30Silanized Micro-Insert .........................................11, 21, 24, 25, 28Silanized Short Thread Vials ..................................................11, 21Silicone/Aluminium Seals ND20 ..................................................38Silicone/PTFE Crimp Seals ND8 ....................................................17Silicone/PTFE Crimp Seals ND11 ..................................................26Silicone/PTFE Crimp Seals ND20 ..................................................38Silicone/PTFE Screw Seals ND8 ....................................................19Silicone/PTFE Screw Seals ND10 ..................................................24Silicone/PTFE Screw Seals ND13 ..................................................31Silicone/PTFE Screw Seals ND18 ..................................................40Silicone/PTFE Screw Seals ND24 ..................................................43Silicone/PTFE Seals ND20 ...........................................................38Silicone/PTFE Short Thread Seals ND9 .........................................22Silicone/PTFE Snap Ring Seals ND11 ...........................................29Snap Caps ..................................................................................41Snap Cap Vials ND18 + ND22 .....................................................41Snap Ring Micro-Vial ND11 .........................................................28Snap Ring Seals ND11 (PE), blue cap ...........................................29Snap Ring Seals ND11 (PE), red cap ............................................29Snap Ring Seals ND11 (PE), transp. cap .......................................29Snap Ring Vial ND11 ..................................................................28Special Packaging .......................................................................53Special Production Runs ..............................................................53Special Seals (ND13, ND40) ........................................................55Special Septa (for SCHOTT Screw Caps) ........................................56Special Vials (ND13, ND15, ND40) ..............................................55SPME-Vial ND20 .........................................................................36Springs .................................................................................18, 31Stoppers 20mm ..........................................................................39Syringe Filters ................................................................10, 47, 48
Technical Information, Seals ..................................................13, 14Technical Information, Septa .......................................................15Technical Information, Vials ...................................................12, 13TopSertTM ....................................................................9, 21, 25, 28TopSertTM, Short Thread ND9 ...................................................9, 21TopSertTM, silanized, Short Thread ND9 ....................................9, 21TopSertTM, silanized, Snap Ring ND11 .................................9, 25, 28TopSertTM, Snap Ring ND11 ................................................9, 25, 28Trademarks ................................................................5, 57, 58, 59
UltraBondTM ........................................................10, 13, 22, 43, 57UltraBondTM Screw Seal ND9/ND24 ...........................10, 22, 43, 57UltraCleanTM ...................................................................13, 53, 57 Universal Screw Caps ND18 .....................................................9, 40
Vial Racks ..................................................................................52Vials with integrated Micro-Insert, Crimp Neck ND11 ....................25Vials with integrated Micro-Insert, Short Thread ND9 ....................21
Alp
habe
tical
Inde
x
61
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Num
eric
al In
dex
00 00 0089 ...............................................5100 00 0120 ...............................................5102 17 0472 ...............................................4902 17 0473 ...............................................4905 09 0129 .........................................18, 8505 09 0269 .........................................18, 8505 09 0279 .........................................18, 8505 09 0706 .........................................33, 8505 09 0968 .........................................18, 8505 09 1674 .........................................18, 8505 13 0426 ...............................................1806 09 0357 .................21, 24, 25, 28, 34, 8506 09 0651 .........................................33, 8506 09 0669 .................21, 24, 25, 28, 34, 8506 09 0865 .......................21, 24, 25, 28, 8506 09 0866 .................21, 24, 25, 28, 34, 8506 09 1240 ...........11, 21, 24, 25, 28, 34, 8506 09 1343 .................11, 21, 24, 25, 28, 8507 18 0935 ...............................................4908 02 0005 ...............................................2008 02 0009 ...............................................2008 02 0039 ...............................................2008 02 0103 ...............................................2008 02 0177 ...............................................2008 02 0220 ...............................................2008 02 0232 ...............................................2008 02 0355 ...............................................2008 02 0563 ...............................................2008 02 0774 ...............................................2008 02 0881 ...............................................2008 02 1633 ...............................................2008 02 1680 ...............................................2008 03 0055 ...............................................1708 03 0113 ...............................................1708 03 0165 ...............................................1708 03 0200 ...............................................1708 03 0249 ...............................................1708 03 0268 ...............................................1708 03 0451 ...............................................1708 03 0599 ...............................................1708 03 0861 ...............................................1708 03 0884 ...............................................1708 03 1156 ...............................................1708 05 0890 .........................................44, 4508 05 0894 ...................................44, 45, 4608 05 0895 .........................................44, 4508 05 0944 .........................................44, 4508 06 0005 ...............................................5008 06 0149 ...............................................5108 07 0001 ...............................................5108 07 0153 ...............................................5108 08 0027 ...............................................2008 08 0420 ...............................................2008 08 0435 ...............................................2008 08 0436 ...............................................2008 08 0488 ...............................................3408 08 0902 .........................................44, 4508 08 1167 ...............................................3408 08 1675 .....................................10,17,8808 09 0258 ......................16,68,70,72,74,8508 09 0276 ......................16,68,70,72,74,8508 09 0284 ......................16,68,70,72,74,8508 09 0305 ......................16,68,70,72,74,8508 09 0405 ......................16,68,70,72,74,8508 09 0406 ......................16,68,70,72,74,8508 09 0483 ...............................................3408 09 0484 ...............................................3408 09 0606 ......................16,68,70,72,74,8508 09 0845 ......................16,68,70,72,74,8508 09 0875 .....................................44,45,8508 09 0888 .....................................44,45,8508 09 0903 .....................................44,45,8508 09 0909 .....................................44,45,8508 09 0953 ......................16,68,70,72,74,8508 09 1080 ......................16,68,70,72,74,8508 09 1081 ..........................................46,8508 14 0513 ......................33,69,71,73,75,8508 14 0595 ......................33,69,71,73,75,8508 14 0641 ......................33,69,71,73,75,8508 14 0876 ...............................................4408 14 0889 ...............................................4408 14 0904 ...............................................4408 14 0910 ...............................................4408 14 1168 ..........................................33,8508 14 1169 ..........................................33,8508 15 0293 ..........................................19,2008 15 0294 ...............................................1908 15 0427 ...............................................1908 15 0460 .........................................19, 2008 15 0654 ...............................................1908 15 0709 ...............................................1908 15 0886 ...............................................1908 15 1040 ...............................................1908 15 1192 ...............................................1908 15 1637 ...............................................1908 15 1653 ...............................................1908 20 0897 ...............................................4408 20 0905 ...............................................4408 20 0911 ...............................................4408 20 0943 ...............................................4408 20 1171 ...............................................4608 20 1181 ...............................................4608 20 1182 ...............................................4608 21 1000 ...............................................5208 27 1670 ...............................................3408 27 1671 ...............................................34
08 27 1672 ...............................................3408 27 1673 ...............................................3408 29 1082 ...............................................4608 29 1107 ...............................................4608 29 1148 ...............................................4609 02 0723 ...............................................2409 04 1220 .........................................10, 2209 04 1533 .........................................10, 2209 04 1534 .............................10, 22, 23, 3009 15 0478 .........................................22, 2309 15 0480 ...............................................2209 15 0481 .........................................22, 2309 15 0753 ...............................................1709 15 0756 ...............................................1709 15 0763 .........................................44, 4509 15 0838 ...................................22, 23, 3009 15 0852 ...............................................2209 15 0867 .........................................22, 2309 15 0868 .........................................22, 2309 15 0869 ...................................22, 23, 3009 15 0981 ...............................................2209 15 0982 ...............................................2209 15 1176 ...............................................2209 15 1177 ...............................................2209 15 1178 ...............................................2209 15 1179 ...............................................2209 15 1337 ...............................................2209 15 1570 ...............................................2209 15 1571 ...............................................2209 15 1572 ...............................................2209 15 1668 ...............................................2209 15 1669 ...............................................2209 18 0936 ...............................................4910 02 0646 ...............................................2410 08 0742 ...............................................2410 09 0743 .................24, 68, 70, 72, 74, 8610 09 1196 .................24, 68, 70, 72, 74, 8610 09 1197 .................24, 68, 70, 72, 74, 8610 15 0744 ...............................................2410 15 1256 ...............................................2410 15 1257 ...............................................2410 15 1259 ...............................................2410 15 1328 ...............................................2410 15 1358 ...............................................2410 18 0937 ...............................................4911 02 0104 ...............................................2711 02 0115 ...............................................2711 02 0140 ...............................................2711 02 0176 ...............................................2711 02 0221 ...............................................2711 02 0446 ...............................................2711 02 0534 ...............................................2711 02 0564 ...............................................2711 02 0721 ...............................................2711 02 0882 ...............................................2711 02 1634 ...............................................2711 02 1662 ...............................................2711 03 0196 ...............................................2611 03 0209 ...............................................2611 03 0247 ...............................................2611 03 0300 ...............................................2611 03 0301 ...............................................2611 03 0302 ...............................................2611 03 0303 ...............................................2611 03 0304 ...............................................2611 03 0318 ...............................................2711 03 0332 ...............................................2711 03 0339 ...............................................2711 03 0362 ...............................................2611 03 0407 ...............................................2711 03 0464 ...............................................2611 03 0588 ...............................................2611 03 0666 ...............................................2611 03 0667 ...............................................2611 03 0700 ...............................................2611 03 0720 ...............................................2711 03 0885 ...............................................2611 03 1624 ...............................................2611 03 1625 ...............................................2611 03 1641 ...............................................2711 03 1663 ...............................................2711 06 0006 ...............................................5011 06 0150 ...............................................5111 07 0002 ...............................................5111 07 0107 ...............................................5111 08 1676 .............................10, 27, 29, 8811 09 0184 .................26, 68, 70, 72, 74, 8611 09 0210 .....18, 20, 54, 68, 70, 72, 74, 8611 09 0259 .....18, 20, 54, 68, 70, 72, 74, 8611 09 0356 .................25, 68, 70, 72, 74, 8611 09 0382 ...........18, 20, 68, 70, 72, 74, 8611 09 0415 .................25, 68, 70, 72, 74, 8611 09 0417 .................18, 68, 70, 72, 74, 8611 09 0419 ...........18, 20, 68, 70, 72, 74, 8611 09 0476 .................25, 68, 70, 72, 74, 8611 09 0477 .................25, 68, 70, 72, 74, 8611 09 0486 .................25, 68, 70, 72, 74, 8611 09 0500 ...........21, 23, 68, 70, 72, 74, 8611 09 0519 ...........21, 23, 68, 70, 72, 74, 8611 09 0520 ...........21, 23, 68, 70, 72, 74, 8611 09 0537 ...............................................3411 09 0538 ...............................................3411 09 0619 .................25, 68, 70, 72, 74, 8611 09 0620 ...........21, 23, 68, 70, 72, 74, 8611 09 0627 .................28, 69, 71, 73, 75, 8611 09 0644 .................28, 69, 71, 73, 75, 86
11 09 0645 .................28, 69, 71, 73, 75, 8611 09 0831 .................26, 68, 70, 72, 74, 8611 09 0921 .................25, 68, 70, 72, 74, 8611 09 0999 .................21, 68, 70, 72, 74, 8611 09 1241 ...........11, 21, 68, 70, 72, 74, 8611 09 1242 ...........11, 21, 68, 70, 72, 74, 8611 14 0544 .................34, 69, 71, 73, 75, 8611 14 0545 .................34, 69, 71, 73, 75, 8611 14 1189 .......9, 21, 23, 68, 70, 72, 74, 8611 14 1190 .......9, 25, 28, 69, 71, 73, 75, 8611 14 1265 .......9, 11, 21, 68, 70, 72, 74, 8611 14 1266 .9, 11, 25, 28, 69, 71, 73, 75, 8611 14 1655 .............9, 21, 68, 70, 72, 74, 8611 14 1656 .......9, 25, 28, 69, 71, 73, 75, 8611 14 1694 .......9, 11, 21, 68, 70, 72, 74, 8611 14 1695 .9, 11, 25, 28, 69, 71, 73, 75, 8611 15 0635 ...............................................2911 15 0636 ...............................................2911 15 0637 ...............................................2911 15 0650 ...............................................2911 15 1151 ...............................................2911 15 1267 ...............................................2911 15 1268 ...............................................2911 15 1269 ...............................................2911 15 1323 ...............................................2911 15 1324 ...............................................2911 15 1325 ...............................................2911 15 1326 ...............................................2911 18 0938 ...............................................4911 19 0932 ...........23, 30, 68, 70, 72, 74, 8611 19 0933 .................30, 69, 71, 73, 75, 8611 19 1021 .................30, 68, 70, 72, 74, 8611 19 1022 .................30, 69, 71, 73, 75, 8611 19 1205 .......9, 21, 30, 68, 70, 72, 74, 8611 19 1216 .................30, 68, 70, 72, 74, 8611 19 1217 .................30, 69, 71, 73, 75, 8611 19 1516 .......9, 21, 30, 68, 70, 72, 74, 8611 23 1046 ...............................................2011 23 1047 ...............................................2011 23 1085 ...............................................2011 23 1098 ...............................................2011 23 1100 ...............................................2011 23 1144 ...............................................2011 23 1145 ...............................................2011 23 1280 ...............................................2011 23 1499 ...............................................2011 23 1614 ...............................................2011 24 1049 ...............................................2311 24 1050 ...............................................2311 24 1051 ...............................................2311 24 1052 ...............................................2311 24 1091 ...............................................2311 24 1129 ...............................................2311 24 1130 .........................................23, 3011 24 1140 ...............................................2311 24 1141 ...............................................2311 24 1142 ...............................................2311 24 1143 ...............................................2311 24 1238 ...............................................2311 24 1342 ...............................................2311 24 1446 ...............................................2311 24 1447 ...............................................2311 24 1476 .........................................23, 3011 24 1528 ...............................................2311 24 1557 ...............................................3011 24 1573 ...............................................2311 24 1593 ...............................................2311 24 1622 ...............................................2311 24 1643 .........................................23, 3011 24 1696 ...............................................2311 27 1063 ...............................................3411 27 1064 ...............................................3412 02 0143 ...............................................3212 02 0168 ...............................................3212 02 0223 ...............................................3212 02 0322 ...............................................3212 02 0463 ...............................................3212 02 0468 ...............................................5612 02 0608 ...............................................3212 02 1635 ...............................................3212 08 0546 ...............................................3412 18 0939 ...............................................4912 21 1001 ...............................................5213 02 0261 ...............................................5613 02 0474 ...............................................5613 02 1379 ...............................................5613 02 1380 ...............................................5613 02 1470 ...............................................5613 03 0307 ...............................................5513 03 0308 ...............................................5513 03 0309 ...............................................5513 03 1381 ...............................................5513 03 1382 ...............................................5513 03 1383 ...............................................5513 06 0007 ...............................................5013 06 0069 ...............................................5113 06 0091 ...............................................5113 06 0134 ...............................................5113 06 0319 ...............................................5113 07 0003 ...............................................5113 07 0154 ...............................................5113 08 0166 ...............................................3213 08 0336 ...............................................3213 08 0452 ...............................................3213 08 0639 ...............................................3213 09 0222 ... 11, 31, 32, 54, 69, 71, 73, 75, 85
13 09 0236 ...............................................5513 09 0280 ..11, 31, 32, 54, 69, 71, 73, 75, 8513 09 0285 ...............................................5513 09 0949 ...............................................5513 09 1335 .................31, 69, 71, 73, 75, 8513 09 1336 .................31, 69, 71, 73, 75, 8513 15 0292 .........................................31, 3213 15 0439 ...............................................3113 15 0456 .........................................31, 3213 15 0553 ...............................................2713 15 0648 ...............................................3113 15 0815 .........................................31, 3213 15 0887 ...............................................3113 15 0996 ...............................................2713 15 1293 .........................................31, 3213 15 1638 ...............................................3113 15 1639 ...............................................3113 28 1067 ...............................................3213 28 1069 ...............................................3213 28 1070 ...............................................3213 28 1071 ...............................................3213 28 1072 ...............................................3213 28 1074 ...............................................3213 28 1075 ...............................................3213 28 1076 ...............................................3213 28 1541 ...............................................3215 08 0547 ...............................................3415 09 0539 ...............................................3415 09 0540 ...............................................3415 09 0788 ...............................................5515 09 1657 ...................................11, 54, 8315 09 1703 ...................................11, 54, 8315 14 0548 ...........33, 34, 69, 71, 73, 75, 8515 14 0562 ...........33, 34, 69, 71, 73, 75, 8515 21 1664 ...............................................5215 27 1065 ...............................................3415 27 1066 ...............................................3416 02 0469 ...............................................5616 02 0653 ...............................................4016 02 0659 ...............................................4016 02 0705 ...............................................4016 02 0870 ...............................................4016 02 1384 ...............................................4016 02 1385 ...............................................4016 02 1678 ...............................................4017 18 0940 ...............................................4918 03 1309 ...........................................9, 4018 03 1414 ...........................................9, 4018 03 1416 ..........................................9, 4018 03 1578 ...........................................9, 4018 03 1666 ...........................................9, 4018 03 1667 ...........................................9, 4018 08 0516 ...............................................4018 08 0614 ...............................................4018 08 0913 ...............................................4118 09 0864 .................36, 69, 71, 73, 75, 8418 09 0906 .........................................41, 8418 09 0907 .........................................41, 8418 09 1306 .............9, 36, 69, 71, 73, 75, 8418 09 1307 .............9, 36, 69, 71, 73, 75, 8418 09 1310 .......9, 11, 36, 69, 71, 73, 75, 8418 09 1311 .......9, 11, 36, 69, 71, 73, 75, 8418 09 1704 ...................................11, 54, 8318 15 0871 ...............................................4018 15 1132 ...............................................4018 15 1386 ...............................................4018 15 1387 ...............................................4019 02 0245 ...............................................3919 02 0693 ...............................................3919 02 1636 ...............................................3920 02 0035 ...............................................3920 02 0057 ...............................................3920 02 0122 ...............................................3920 02 0141 ...............................................3920 02 0638 ...............................................3920 02 1488 .........................................11, 3920 03 0030 ...............................................3820 03 0059 ...............................................3720 03 0060 ...............................................3820 03 0061 ...............................................3820 03 0112 ...............................................3720 03 0126 ...............................................3720 03 0127 ...............................................3720 03 0142 ...............................................3820 03 0163 ...............................................3820 03 0186 ...............................................3720 03 0194 ...............................................3720 03 0195 ...............................................3720 03 0212 ...............................................3720 03 0226 ...............................................3820 03 0227 ...............................................3820 03 0264 ...............................................3820 03 0326 ...............................................3820 03 0327 ...............................................3820 03 0665 ...............................................3820 03 0670 ...............................................3820 03 0698 ...............................................3720 03 0710 ...............................................3820 03 0711 ...............................................3720 03 0828 ...............................................3820 03 0901 ...............................................3820 03 0975 ...............................................3820 03 1157 ...............................................3720 03 1186 ...............................................3720 03 1200 ...............................................3820 03 1246 ...............................................39
20 03 1264 ...............................................3920 03 1489 .........................................11, 3820 03 1490 .........................................11, 3820 03 1491 .........................................11, 3820 03 1536 .........................................11, 3820 03 1577 .........................................11, 3820 06 0008 ...............................................5020 06 0043 ...............................................5120 06 0088 ...............................................5120 06 0090 ...............................................5120 06 0148 ...............................................5120 06 0170 ...............................................5120 07 0004 ...............................................5120 07 0155 ...............................................5120 09 0289 .........................................37, 8320 09 0297 ...........35, 36, 69, 71, 73, 75, 8420 09 0342 .................36, 69, 71, 73, 75, 8420 09 0343 .........................................37, 8320 09 0440 .................36, 69, 71, 73, 75, 8420 09 0784 .........................................41, 8420 09 0795 .................36, 69, 71, 73, 75, 8420 09 0796 .................36, 69, 71, 73, 75, 8420 09 0801 .................36, 69, 71, 73, 75, 8420 09 0802 .................36, 69, 71, 73, 75, 8420 09 0873 .................36, 69, 71, 73, 75, 8420 09 1222 .................36, 69, 71, 73, 75, 8420 09 1223 ...........11, 36, 69, 71, 73, 75, 8420 09 1405 .................36, 69, 71, 73, 75, 8420 09 1690 ...........11, 36, 69, 71, 73, 75, 8420 09 1691 ...........11, 36, 69, 71, 73, 75, 8420 09 1705 ...................................11, 54, 8320 10 0290 ...............................................3922 02 0409 ...............................................4322 02 0487 ...............................................4322 02 1108 ...............................................4322 02 1390 ...............................................4322 02 1393 ...............................................4322 08 0257 ...............................................3922 08 0340 ...............................................3922 08 0794 ...............................................4122 09 0908 ...............................................4122 15 0321 ...............................................3922 15 0712 ...............................................3922 15 0863 ...............................................3922 15 1334 ...............................................3922 15 1646 ...............................................3922 15 1697 ...............................................3923 02 0470 ...............................................5624 04 0841 ...............................................4324 04 0842 ...............................................4324 08 0403 ...............................................4324 08 0592 ...............................................4324 09 0402 .....42, 54, 65, 69, 71, 73, 75, 8324 09 0589 .....42, 54, 65, 69, 71, 73, 75, 8324 09 0839 .....42, 54, 65, 69, 71, 73, 75, 8324 09 0923 .....42, 54, 65, 69, 71, 73, 75, 8324 09 0927 .....42, 54, 65, 69, 71, 73, 75, 8324 09 0928 .....42, 54, 65, 69, 71, 73, 75, 8324 09 1089 .....42, 54, 65, 69, 71, 73, 75, 8324 09 1090 .....42, 54, 65, 69, 71, 73, 75, 8324 14 0976 ...............................................4324 14 1094 ...............................................4324 14 1278 ...............................................4324 14 1354 ...............................................4324 14 1538 ...............................................4324 14 1621 ...............................................4324 15 1007 ...............................................4324 15 1163 ...............................................4324 15 1394 ...............................................4324 15 1395 ...............................................4324 15 1540 ...............................................4324 21 1002 ...............................................5225 16 0346 ...............................................4725 16 0347 ...............................................4725 16 0348 ...............................................4725 16 0349 ...............................................4725 16 0350 ...............................................4725 16 0351 ...............................................4725 16 1546 .........................................10, 4825 16 1547 .........................................10, 4825 16 1548 .........................................10, 4825 16 1549 .........................................10, 4825 16 1550 .........................................10, 4825 16 1551 .........................................10, 4825 16 1552 .........................................10, 4825 16 1553 .........................................10, 4825 16 1587 .........................................10, 4828 06 0190 ...............................................5128 06 0191 ...............................................5128 06 0320 ...............................................5028 07 0092 ...............................................5128 07 0156 ...............................................5130 02 0471 ...............................................5632 06 0135 ...............................................5032 06 0151 ...............................................5132 06 0192 ...............................................5132 07 0078 ...............................................5132 07 0157 ...............................................5140 09 0146 ...............................................3140 09 0678 ...............................................5640 15 0674 ...............................................5543 02 0413 ...............................................5650 13 0147 ...............................................31
62
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Article Number System
Our 8 digital article number comprises the following indications:
8mm Polypropylene Screw Cap black, 5.5mm centre hole
08 08 0027Diameter in mm Sequential Number
Article Group(08=Plastic Caps,
no liner)
Annex of Numerical Index
A list of our article groups is shown below
01 Metal Crimp and Screw Caps (no liner)02 Septa03 Assembled Seals of Metal Caps and Septa04 UltraBondTM Seals05 96 Position Blocks and Plates (empty)06 Crimping Tools + crimping heads07 Decapping Tools + decapping heads08 Plastic Caps (no liner)09 Glass Articles10 Stoppers11 Flip Top/Flip Off Seals (only on special request)12 Flip Tear Up Seals (only on special request)13 Springs14 Combination of glass and plastic articles15 Assembled Seals of Plastic Caps and Septa16 Syringe Filters (ProFillTM + ProFillTM PLUS)17 Capillary Connectors18 GC Injection Port Septa19 Plastic Vials20 96 Position Blocks and Plates filled with suitable Inserts + Seals with Inserts + Block Covers21 Vial Racks23 2in1 KITs 1.5ml Screw Neck ND824 2in1 KITs 1.5ml Short Thread ND925 2in1 KITs 1.5ml Crimp Neck ND1126 2in1 KITs 1.5ml Snap Ring ND1127 2in1 KITs 1ml, 2ml and 4ml Shell Vials28 2in1 KITs 4ml Screw Neck ND1329 Block Covers (SealmatTM)31 Combination of glass and metal articles (already crimped vials)32 2in1 KITs 1.5ml Screw Neck ND1033 2in1 KITs 20ml Headspace ND20 + ND1834 Plastic-/plastic combinations99 Others
Ann
ex o
f Num
eric
al In
dex
63
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
HPLC GC HS TOCApplication:
Instrument CompanyCTC
LC P
AL
HTC
PA
LH
TS P
AL
AS
200
CO
MBI
PA
LG
C P
AL
A 2
00 S
CO
MBI
PA
LH
S 50
0
Crimp Neck Vials ND8 and Seals08 09 0405/08 09 040608 09 0305/08 09 0258
chapter 1/p. 16 X X X X
08 03 0249/08 03 0113 chapter 1/p. 17 X X X XCrimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 047611 09 0477
chapter 5/p. 25 X X X X X X X
06 09 0357/06 09 066906 09 0866/06 09 0865
chapter 5/p. 25 X X X X X X X
11 09 0619/11 09 092111 09 0415
chapter 5/p. 25 X X X X X X X
11 03 0209/11 03 024711 03 0196
chapter 5/p. 26 X X X X X
11 03 0318/11 03 0332 chapter 5/p. 27 X X X X XScrew Neck Vials ND8, Micro-Inserts and Seals11 09 0210/11 09 025911 09 0419/11 09 038211 09 0417
chapter 2/p. 18 X X X X X
05 09 0129/05 09 026905 09 1674/05 09 0968
chapter 2/p. 18 X X X X X
08 15 0460/08 15 029308 15 0294
chapter 2/p. 19 X X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 14 118911 14 1655/11 09 0999
chapter 3/p. 21 X X X X X
06 09 0357/06 09 066906 09 0866/06 09 0865
chapter 3/p. 21 X X X X X
11 19 1205/11 19 151611 19 0932
chapter 7/p. 30 X X X X X
09 15 0478/09 15 086709 15 1176
chapter 3/p. 22 X X X X X
09 15 0481/09 15 083809 15 1178
chapter 3/p. 22 X X X X X
09 15 0480/09 15 086809 15 1177
chapter 3/p. 22 X X X X X
09 15 0852/09 15 086909 15 1179
chapter 3/p. 22 X X X X
Screw Neck Vials ND10, Micro-Inserts and Seals10 09 0743/10 09 119610 09 1197
chapter 4/p. 24 X X X
06 09 0357/06 09 066906 09 0866/06 09 0865
chapter 4/p. 24 X X X
10 15 1256/10 15 125710 15 1328/10 15 1258
chapter 4/p. 24 X X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 119011 14 1656/11 19 0933
chapter 6/p. 28 X X X X
06 09 0357/06 09 066906 09 0866/06 09 0865
chapter 6/p. 28 X X X X
11 15 0635/11 15 126711 15 1323
chapter 6/p. 29 X X X X
11 15 0637/11 15 115111 15 1325
chapter 6/p. 29 X X X X
11 15 0636/11 15 126811 15 1324
chapter 6/p. 29 X X X X
11 15 0650/11 15 126911 15 1326
chapter 6/p. 29 X X X X
Headspace Vials and Seals ND20/ND1820 09 1405/20 09 1691 chapter 10/p. 36 X X20 09 0873/20 09 1690 chapter 10/p. 36 X20 03 0665 chapter 10/p. 38 X20 03 0975/20 03 149120 03 1577
chapter 10/p. 38 X
20 09 1222 chapter 10/p. 36 X20 03 1246/20 03 1264 chapter 10/p. 39 X18 09 1307/18 09 131118 09 1306/18 09 1310
chapter 10/p. 36 X
18 03 1578/18 03 130918 03 1414/18 03 1416
chapter 10/p. 40 X
Instrument Company Agilent
Agi
lent
105
0A
gile
nt 1
090
Agi
lent
110
0A
gile
nt 7
9855
(A)
Agi
lent
588
0A
gile
nt 5
890
Agi
lent
685
0A
gile
nt 6
890
Agi
lent
767
3AA
gile
nt 7
683A
Agi
lent
G18
88A
Agi
lent
HS7
694
Agi
lent
769
5ATe
kmar
AQ
UAT
ek 7
0
Crimp Neck Vials ND8 and Seals08 09 0276/08 09 060608 09 1080
chapter 1/p. 16 X X X X
08 03 0451/08 03 024908 03 0113
chapter 1/p. 17 X X X X
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 047611 09 0477/11 09 061911 09 0921/11 14 1190
chapter 5/p. 25 X X X X X X X X X X
06 09 0669/06 09 0866 06 09 0865/06 09 1343
chapter 5/p. 25 X X X X X X X X X X
11 03 0209/11 03 030111 03 0302/11 03 030311 03 0304/11 03 024711 03 0196
chapter 5/p. 26 X X X X X X X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 09 0620
chapter 3/p. 21 X X X X X X X X X X
06 09 0669/06 09 0866, 06 09 0865/06 09 1343
chapter 3/p. 21 X X X X X X X X X X
09 15 0867/09 15 083809 15 0868/09 15 0869 09 04 1533/09 04 1534
chapter 3/p. 22 X X X X X X X X X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 1190
chapter 6/p. 28 X X X X
06 09 0669/06 09 0866 06 09 0865/06 09 1343
chapter 6/p. 28 X X X X
11 15 1267/11 15 115111 15 1268/11 15 126911 08 1676
chapter 6/p. 29 X X X X
Headspace Vials and Seals ND20/ND1820 09 0795/20 09 0796 chapter 10/p. 36 X20 03 0901/20 03 082820 03 0030/20 03 0264
chapter 10/p. 38 X
18 09 1307/18 091311 chapter 10/p. 36 X18 03 1414 chapter 10/p. 40 XScrew Neck Vials ND24 and Seals24 09 0402/24 09 0928 chapter 12/p. 42 X X24 04 0842/24 04 0841 chapter 12/p. 43 X X24 08 0403/24 08 0592 chapter 12/p. 43 X X22 02 1108 chapter 12/p. 43 X X
Instrument Company Dionex
Gin
a 50
AS
50A
SI 1
00 (T
)A
SI 2
00
Crimp Neck Vials ND8 and Seals08 09 0845/08 09 0953 chapter 1/p. 16 X X08 03 0200/08 03 0884/08 03 0599/08 03 0249 chapter 1/p. 17 X XCrimp Neck Vials ND11 and Seals11 09 0356/11 09 0476/11 09 0477/11 09 061911 09 0921/11 14 1190/11 14 1656/11 14 1266
chapter 5/p. 25 X X
11 03 0300/11 03 0247 chapter 5/p. 26 X X11 03 0464 chapter 5/p. 26 X XScrew Neck Vials ND8 and Seals11 09 0210/11 09 0259/11 09 0419/11 09 0382 chapter 2/p. 18 X X08 15 0460/08 15 0293/08 15 0709/08 15 0886 chapter 2/p. 19 X08 15 1449 X X XShort Thread Vials ND9 and Seals11 09 0500/11 09 0519/11 09 0520/11 14 118911 09 0999/11 09 0620
chapter 3/p. 21 X X X
11 19 1205/11 19 1516/11 19 0932/11 19 1216 chapter 7/p. 30 X X X09 15 0867/09 15 0838 chapter 3/p. 22 X X09 15 0869/09 04 1534 chapter 3/p. 22 X X XScrew Neck Vials ND10 and Seals10 09 0743/10 09 1196/10 09 1197 chapter 4/p. 24 X10 15 1328 chapter 4/p. 24 XSnap Ring Vials ND11 and Seals11 09 0627/11 09 0644/11 09 0645 11 14 1190/11 14 165611 19 0933/11 19 1217
chapter 6/p. 28
chapter 7/p. 30
X X X
11 15 1267/11 15 1151 chapter 6/p. 29 X X11 15 1269 chapter 6/p. 29 X X XScrew Neck Vials ND13 and Seals13 09 0222/13 09 1335/13 09 0280/13 09 1336 chapter 8/p. 31 X X13 15 0456/13 15 0815/13 15 1293 chapter 8/p. 31 X XScrew Neck Vials ND24 and Seals24 09 0402/24 09 0928 chapter 12/p. 42 X24 04 0842/24 04 0841 chapter 12/p. 43 X24 08 0403/24 08 0592 chapter 12/p. 43 X22 02 1108 chapter 12/p. 43 X
Qui
ck-R
efer
ence
-Cha
rts
64
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
HPLC GC HS TOCApplication:
Instrument CompanyPerkin Elmer
Serie
s 200
, 25
via
l tra
ySe
ries 2
00,
85 v
ial t
ray
Serie
s 200
, 81
/100
via
l tra
ySe
ries 2
00,
205
vial
tray
Serie
s 200
, 22
5 vi
al tr
ayAS
2000
/AS2
000B
ISS-
100,
100
via
l tra
yIS
S-10
0, 8
5 vi
al tr
ayIS
S-20
0, 1
45 v
ial t
ray
ISS-
200,
100
via
l tra
yIS
S-20
0, 8
5 vi
al tr
ayLC
600
, 42
vial
tray
LC 6
00, 6
0 vi
al tr
ayIn
terg
ral 4
000
AL-1
AS-1
00/A
S-10
0BAS
-300
AS83
00Au
tosy
stem
C
laru
s 500
HS6
HS4
0 /
HS1
00 /
H
S101
Turb
oMat
rixTM
HS1
6 /
HS
40 /
HS4
0XL /
HS
40 Tr
ap /
HS1
10 /
HS
110
Trap
Crimp Neck Vials ND8 and Seals08 09 0284 ch. 1/p. 16 X X X X X X X08 09 1080 ch. 1/p. 16 X08 09 0276 ch. 1/p. 16 X X X X X X X X08 03 0268/08 08 1675 ch. 1/p. 17 X X X X X08 03 0200/08 03 024908 03 0113
ch. 1/p. 17 X X X X X X X X X X
09 15 0753 ch. 1/p. 17 X X X X XCrimp Neck Vials ND11, Micro-Inserts and Seals 11 09 0356/11 09 047611 09 0477
ch. 5/p. 25 X X X X X X X X X X X X X X X X
06 09 0357/06 09 066906 09 0866/06 09 0865
ch. 5/p. 25 X X X X X X X X X X X X X X X X
11 09 0184 ch. 5/p. 25 X X X X X X X X X X X X X X X X11 03 0209/11 03 030011 03 0301/11 03 030211 03 0303/11 03 164111 03 0247
ch. 5/p. 26 X X X X X X X X X X X X X X X X
11 03 0339/11 08 1676 ch. 5/p. 27 X X X X X X X X X X11 03 0720 ch. 5/p. 27 X X X X X XScrew Neck Vials ND10 and Seals10 09 0743/10 09 119610 09 1197
ch. 4/p. 24 X X X X X X X X X X X X
10 15 1256/10 15 125710 15 0744
ch. 4/p. 24 X X X X X X X X X X X X
10 15 1328 ch. 4/p. 24 X X X X X X X X X XHeadspace Vials and Seals ND20/ND1820 09 0342 ch. 10/p. 36 X X X X X X X20 09 0297/20 09 044020 09 1223
ch. 10/p. 36 X X
20 03 0126/20 03 011220 03 0264/20 03 032620 03 1490/20 03 016320 03 0828
ch. 10/ p. 37-38
X X X
20 03 0127/20 03 005920 03 0030/20 03 032720 03 1489/20 03 014220 03 0901
ch. 10/ p. 37-38
X X X
20 01 0408 + 20 10 0290 ch. 10/p. 39 X X X18 09 0864 ch. 10/p. 36 X X18 15 0871 ch. 10/p. 40 X X
Instrument Company WATERS®
Wat
ers®
Wisp
48
Posit
ion
Wat
ers®
Wisp
96
Posit
ion
Wat
ers®
717
Allia
nce®
GPC
200
0Al
lianc
e®
Allia
nce®
HT
Syste
m
Acqu
ity U
PLC
TM S
yste
m
Allia
nce®
269
0/26
95Al
lianc
e® 2
790/
2795
1ml Shell Vials 08 14 1168/08 14 1169/08 14 051308 14 0595
chapter 9/p. 33 X
4ml Shell Vials 15 14 0548/15 14 0562 chapter 9/p. 33 X XCrimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 0476/11 09 047711 14 1190/11 09 0921/11 09 0619
chapter 5/p. 25 X X X X
06 09 0865, 06 09 1343 chapter 5/p. 25 X X X X11 03 0247/11 03 0196 chapter 5/p. 26 X X X XShort Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 0519/11 09 052011 14 1189/11 09 0999/11 09 0620*
chapter 3/p. 21 X X X X
11 19 1205/11 19 1516/11 19 0932 chapter 3/p. 21 X X X X06 09 0865/06 09 1343 chapter 3/p. 21 X X X X09 15 0838/09 15 0869/09 15 117809 15 1179/09 15 1332
chapter 3/p. 22 X X X X
09 04 1220/09 04 1533/09 04 1534 chapter 3/p. 22 X X X XScrew Neck Vials ND10, Micro-Inserts and Seals10 09 0743/10 09 1196/10 09 1197 chapter 4/p. 24 X X X X06 09 0865/06 09 1343 chapter 4/p. 24 X X X X10 15 1257/10 15 0744/10 15 1328 chapter 4/p. 24 X X X XSnap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 0644/11 09 064511 14 1190/11 14 1656/11 19 0933
chapter 6/p. 28 X X X X
06 09 0357/06 09 0865 chapter 6/p. 28 X X X X11 15 1151/11 15 1269/11 15 132511 15 1326/11 08 1676
chapter 6/p. 29 X X X X
Screw Neck Vials ND13, Micro-Insert and Seals13 09 0222/13 09 1335/13 09 028013 09 1336
chapter 8/p. 31 X X X X**
40 09 0146 + 50 13 0147 chapter 8/p. 31 X X X**13 15 0815/13 15 1293 chapter 8/p. 31 X X X X**13 08 0166 + 12 02 0168 chapter 8/p. 32 X X X X**Crimp Neck Vial ND20 and Seals20 09 1405 / 20 03 0142/20 03 0901 chapter 10/
p. 36+38X
*: not for Alliance® 2690/2695 X**: for 24 Positon Plate
Instrument Company VWR (Merck®)/Hitachi
LaC
hrom
+
LaC
hrom
Elite
® A
SAS
2000
AS40
00AS
6000
Crimp Neck Vials ND8 and Seals08 09 0276/08 09 0606 chapter 1/p. 16 X X08 03 0249/08 03 1156 chapter 1/p. 17 X XScrew Neck Vials ND8, Micro-Inserts and Seals11 09 0210/11 09 025911 09 0419/11 09 0382
chapter 2/p. 18 X X X X
05 09 0129/ 05 09 0279 + 05 13 0426
chapter 2/p. 18 X X X X
08 15 0460/08 15 029308 08 0027 + 08 02 003908 08 0027 + 08 02 0177
chapter 2/ p. 19-20
X X X X
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 047611 09 0477/11 14 119011 14 1656/11 09 0921
chapter 5/p. 25 X X
06 09 0357/06 09 0865 chapter 5/p. 25 X X11 03 0446/11 03 033911 03 0247
chapter 5/p. 26 X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 119011 14 1656/11 19 0933
chapter 6/p. 28 X X X X
06 09 0357/06 09 0865 chapter 6/p. 28 X X X X11 15 0637/11 15 0650 chapter 6/p. 29 X X X XScrew Neck Vials ND13, Micro-Insert and Seals13 09 0222/13 09 133513 09 0280/13 09 1336
chapter 8/p. 31 X
40 09 0146 + 50 13 0147 chapter 8/p. 31 X13 15 0815/13 15 1293 chapter 8/p. 31 X13 08 0166 + 12 02 0168 chapter 8/p. 32 X
PLUS
Qui
ck-R
efer
ence
-Cha
rts
65
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
HPLC GC HS TOCApplication:
Instrument CompanyShimadzu
LC-2
010
SIL-2
AS
SIL-6
ASI
L-6B/
SIL-7
A/
SIL-8
A/S
IL-9A
SIL-1
0A/S
IL-10
AF/
SIL-
10A
P/SI
L-Ai/
SIL-1
0AxL
SIL-1
0AD
vpSI
L-HT
SIL-2
0A (P
rom
inen
ce)
105
vial
tray
SIL-2
0A/S
il-20A
C (P
ro-
min
ence
) 175
via
l tray
SIL-2
0A/S
il-20A
C (P
ro-
min
ence
) 50
vial tr
aySI
L-20A
C (P
rom
i-ne
nce)
70
vial
tray
AO
C-2
0/A
OC
20i/
AO
C-2
0sA
OC
-17
AO
C-1
4 /
1400
AO
C-5
000
AO
C-5
000
ASI
-V
Crimp Neck Vials ND8 and Seals08 09 0276/08 09 0606 ch. 1/p. 16 X X08 09 0305/08 09 025808 09 0405/08 09 0406
ch. 1/p. 16 X
08 03 0884/08 03 024908 03 0113/08 03 115608 08 1675 (only HPLC)
ch. 1/p. 17 X X X
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 047611 09 0477/11 09 041511 09 0921/11 09 061911 14 1190/11 14 1656
ch. 5/p. 25 X X X X X X X X X X X X X
06 09 0357/06 09 066906 09 0865/06 09 0866
ch. 5/p. 25 X X X X X X X X X X X X X
11 03 0300/11 03 088511 03 0588/11 03 024711 03 0464/11 03 033911 08 1676 (only HPLC)
ch. 5/p. 27 X X X X X X X X X X X X
11 03 0318/11 03 0332 ch. 5/p. 27 XScrew Neck Vials ND8 and Micro-Inserts 11 09 0210/11 09 025911 09 0419/11 09 038211 09 0417
ch. 2/p. 18 X X X X X X X X X X X X
05 09 0129/05 09 026905 09 0968/05 09 1674
ch. 2/p. 18 X X X X X X X X X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 14 118911 14 1655/11 09 099911 09 0620
ch. 3/p. 21 X X X X X X X X X X X X
06 09 0357/06 09 066906 09 0865/06 09 0866
ch. 3/p. 21 X X X X X X X X X X X X
11 19 1205/11 19 151611 19 0932/11 19 1216
ch. 7/p. 30 X X X X X X X X X
09 15 0838/09 15 117809 15 1332
ch. 3/p. 22 X X X X X X X X X X X X
09 15 0869/09 15 1179 ch. 3/p. 22 X X X X X X X X X X X X09 04 1220/09 04 153309 04 1534
ch. 3/p. 22 X X X X X X X X X X X X
09 15 0982/09 15 133709 15 1539
ch. 3/p. 22 X X X X X X X X X
Screw Neck Vials ND10, Micro-Inserts and Seals10 09 0743/10 09 119610 09 1197
ch. 4/p. 24 X X X X X X X X X X X X
06 09 0357/06 09 066906 09 0865/06 09 0866
ch. 4/p. 24 X X X X X X X X X X X X
10 15 1257/10 15 074410 15 1328 (only HPLC)
ch. 4/p. 24 X X X X X X X X X X X X
10 08 0742 + 10 02 0646 ch. 4/p. 24 X X X X X X X X X Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 119011 14 165611 19 0933/11 19 1217
ch. 6/p. 28
ch. 7/p. 30
X X X X X X X X X
06 09 0357/06 09 066906 09 0865/06 09 0866
ch. 6/p. 28 X X X X X X X X X
11 15 0637/11 15 115111 15 1325
ch. 6/p. 29 X X X X X X X X X
11 15 0650/11 15 126911 15 1326
ch. 6/p. 29 X X X X X X X X X
Screw Neck Vials ND13, Micro-Insert and Seals13 09 0222/13 09 133513 09 0280/13 09 1336
ch. 8/p. 31 X X X X X X X X X X X
40 09 0146 + 50 13 0147 ch. 8/p. 31 X X X X X X X X X X X13 15 0887/13 15 081513 15 1293 (only HPLC)
ch. 8/p. 31 X X X X X X X X X X X
13 08 0166+12 02 0168 ch. 8/p. 31 X X X X X X X X Shell Vials 1ml, 2ml and 4ml with Plugs and Micro-Inserts08 14 0513/08 14 059505 09 0706
ch. 9/p. 33 X X X
11 14 0544/11 14 054506 09 0357
ch. 9/p. 34 X X X X
15 14 0548/15 14 056206 09 0651
ch. 9/p. 33 X X X X X X X
Headspace Vials and Seals ND20/ND1820 09 1405/20 09 1691 ch. 10/p. 36 X X20 09 0873/20 09 1690 ch. 10/p. 36 X20 03 0975/20 03 1536 ch. 10/p. 38 X22 15 1334 ch. 10/p. 39 X18 09 1307/18 09 131118 09 1306/18 09 1310
ch. 10/p. 36 X
18 03 1578/18 03 130918 03 1414/18 03 1416
ch. 10/p. 40 X
Screw Neck Vials ND24 and Seals24 09 0402/24 09 0928 ch. 12/p. 42 X24 04 0842/24 04 0841 ch. 12/p. 43 X24 08 0403/24 08 0592 ch. 12/p. 43 X22 02 1108 ch. 12/p. 43 X
Instrument CompanySpark
Mar
atho
nM
idas
Tria
thlo
n,
Stan
dard
Tra
y Tr
iath
lon,
LSV
Tray
Tria
thlo
n,
Supe
r-LSV
Tra
yTr
iath
lon,
Mic
ro-Tr
ayPr
omis
SPH
125
Crimp Neck Vials ND8 and Seals08 09 0405/08 09 040608 09 0305/08 09 025808 09 1080
ch. 1/p. 16 X
08 09 0276/08 09 0606 ch. 1/p. 16 X08 03 0451/08 03 020008 03 0884/08 03 059908 03 0249/08 03 011308 08 1675
ch. 1/p. 17 X X
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0831 ch. 5/p. 26 X X11 09 0415 ch. 5/p. 25 X X X X X11 09 0356/11 09 047611 09 0477/11 09 061911 09 0921/11 14 119011 14 1656
ch. 5/p. 25 X X X X X
06 09 0357/06 09 0669 ch. 5/p. 25 X X X X X11 03 0209/11 03 030011 03 0885/11 03 058811 03 0247/11 03 019611 08 1676
ch. 5/p. 26
ch. 5/p. 27
X X X X X
Screw Neck Vials ND8, Micro-Inserts and Seals11 09 0417 ch. 2/p. 18 X X X X11 09 0210/11 09 025911 09 0419/11 09 0382
ch. 2/p. 18 X X X X
05 09 0129/05 09 0269 ch. 2/p. 18 X X X X08 15 0460/08 15 029308 15 0294/08 15 070908 15 0886
ch. 2/p. 19 X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 14 118911 14 1655/11 09 099911 09 0620
ch. 3/p. 21 X X X X X
06 09 0357/06 09 0669 ch. 3/p. 21 X X X X X11 19 1205/11 19 151611 19 0932/11 19 1216
ch. 7/p. 30 X X X X X
09 15 0982/09 15 086709 15 0838/09 15 086809 15 0869
ch. 3/p. 22 X X X X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 119011 14 165611 19 0933/11 19 1217
ch. 6/p. 28
ch. 7/p. 30
X X X X X
06 09 0357/06 09 0669 ch. 6/p. 28 X X X X X11 15 1267/11 15 115111 15 1268/11 15 1269
ch. 6/p. 29 X X X X X
Screw Neck Vials ND13, Micro-Insert and Seals13 09 0222/13 09 133513 09 0280/13 09 1336
ch. 8/p. 31 X
40 09 0146 + 50 13 0147
ch. 8/p. 31 X
13 15 0456/13 15 081513 15 1328/13 15 0292
ch. 8/p. 31 X
Headspace Vials and Seals ND20/ND1820 09 1405/20 09 1691 ch. 10/p. 36 X X20 09 0342 ch. 10/p. 36 X X20 03 0059/20 03 0030 ch. 10/
p. 37-38X X
20 03 0142/20 03 0901 ch. 10/p. 38 X X X
Qui
ck-R
efer
ence
-Cha
rts
66
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Instrument Company Thermo Electron = ThermoFinnigan/ ThermoQuest/ Carlo Erba/Fisons
AS10
0 (C
arlo
Erb
a/Fis
ons/
Ther
mo)
A200
LC (C
arlo
Erb
a/Fis
ons/
Ther
mo)
AS30
0 (C
arlo
Erb
a/Fi
sons
)Sp
ectra
SYST
EM A
S100
0Sp
ectra
SYST
EM A
S300
0Sp
ectra
SYST
EM A
S350
0A2
00S
(Car
lo E
rba/
Fiso
ns/T
herm
o)A8
00S
- 42
vial
tray
(C
arlo
Erb
a, F
isons
)A8
00S
- 60
vial
tray
(C
arlo
Erb
a, F
isons
)AS
1000
(Tra
ce G
C)
AS20
00 -
90 v
ial t
ray
(Trac
e G
C)
AS20
00 -
30 v
ial t
ray
(Trac
GC
)AI
3000
/AS3
000/
AS35
00
(Trac
e G
C +
Foc
us G
C)
TriP
lus A
S +
DUO
(vgl
. CTC
GC
PAL)
Com
bi P
al (C
TC)
HS2
50 (C
arlo
Erb
a/Fi
sons
/The
rmo)
HS2
50 (C
arlo
Erb
a/Fi
sons
/The
rmo)
HS8
00 (C
arlo
Erb
a/Fi
sons
/The
rmo)
HS8
50 (C
arlo
Erb
a/Fi
sons
/The
rmo)
HS2
000
(The
rmo)
TriP
lus H
S (v
gl. C
TC C
ombi
PAL
)H
iPer
TO
C
Crimp Neck Vials ND8 and Seals08 09 0284 chapter 1/p. 16 X08 09 0845/08 09 0953 chapter 1/p. 16 X X X X08 09 0276/08 09 0606 chapter 1/p. 16 X X X X X X X X08 09 0305/08 09 025808 09 0405/08 09 0406
chapter 1/p. 16 X X X X X X X X X X
08 03 0884/08 03 059908 03 0249/08 03 0113
chapter 1/p. 17 X X X X X X X X X X X X
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0831 chapter 5/p. 26 X X X X11 09 0415 chapter 5/p. 25 X X X X X X X X X X X X11 09 0356/11 09 047611 09 0477/11 09 061911 09 0921/11 14 119011 14 1266/11 14 1656
chapter 5/p. 25 X X X X X X X X X X X X X
06 09 0357/06 09 066906 09 0865
chapter 5/p. 25 X X X X X X X X X X X X X
11 03 0209/11 03 030011 03 0885/11 03 058811 03 0247/11 03 0196
chapter 5/p. 26 X X X X X X X X X X X X
11 0318/11 03 0332 chapter 5/p. 27 XScrew Neck Vials ND8, Micro-Inserts and Seals11 09 0210/11 09 025911 09 0419/11 09 0382
chapter 2/p. 18 X X X X X X X X X X X X
05 09 0129/05 09 026905 09 0968 05 09 0279 + 05 13 0426
chapter 2/p. 18 X X X X X X X X X X X X
11 09 0417 chapter 2/p. 18 X X X X X X08 15 0460/08 15 029308 15 0294/08 15 070908 15 0886
chapter 2/p. 19 X X X X X X X X X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 09 0999 11 09 1241/11 09 124211 09 0620/11 14 118911 14 165511 19 0932/11 19 1216*
chapter 3/p. 21 *: chapter 7/ p. 30 (CE + HPLC)
X X X X X X X X X X X X
09 15 0867/09 15 083809 15 0868
chapter 3/p. 22 X X X X X X X X X X X X
Screw Neck Vials ND10, Micro-Inserts and Seals10 09 0743/10 09 119610 09 1197
chapter 4/p. 24 X X X X X X X
06 09 0357/06 09 066906 09 0865
chapter 4/p. 24 X X X X X X X
10 15 1256/10 15 125710 15 0744/10 15 1258
chapter 4/p. 24 X X X X X X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 119011 19 0933/11 19 1217
chapter 6/p. 28
chapter 7/p. 30
X X X X X X
06 09 0357/06 09 066906 09 0865
chapter 6/p. 28 X X X X X X
11 15 0635/11 15 063711 15 0636
chapter 6/p. 29 X X X X X X
2ml Shell Vials ND11 with Plugs and Micro-Inserts11 14 0544/11 14 1545 chapter 9/p. 34 X X X X X X06 09 0357/06 09 0669 chapter 9/p. 34 X X X X X XHeadspace Vials and Seals ND20/ND1820 09 0795/20 09 0796 chapter 10/p. 36 X X X X X20 09 1405/20 09 1691 chapter 10/p. 36 X X X X X20 09 0873/20 09 1690 chapter 10/p. 36 X X20 03 0975/20 03 120020 03 1536
chapter 10/p. 38 X X
20 03 0127/20 03 014220 03 0030
chapter 10/ p. 37-38
X X X
20 03 0711/20 03 066520 03 0710
chapter 10/ p. 37-38
X X X
22 15 1334 chapter 10/p. 39 X18 09 1307/18 09 131118 09 1306/18 09 1310
chapter 10/p. 36 X X
18 03 1578/18 03 130918 03 1414/18 03 1416
chapter 10/p. 40 X X
Screw Neck Vials ND24 and Seals24 09 0402/24 09 0928 chapter 12/p. 42 X24 04 0842/24 04 0841 chapter 12/p. 43 X24 08 0403/24 08 0592 chapter 12/p. 43 X22 02 1108 chapter 12/p. 43 X
HPLC GC HS TOCApplication:
Qui
ck-R
efer
ence
-Cha
rts
67
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Instrument Company Varian
ProS
tar 4
00, 4
10,
420,
Sta
ndar
d Tr
ayPr
oSta
r 400
, 410
, 42
0, LS
V Tr
ayPr
oSta
r 400
, 410
, 42
0, S
uper
LSV
Tray
ProS
tar 4
30Va
rian
8035
Varia
n LC
91
00/9
095/
9090
Mar
atho
n Vi
sta84
0084
0080
0081
0082
00C
P-901
0C
P-910
, 911
, 912
CP-9
40, 9
41C
ombi
PAL
CP-9
020/
9025
CP-9
060
Gen
esis
Arch
on
Crimp Neck Vials ND8 and Seals08 09 0305/08 09 0258 chapter 1/p. 16 X*08 03 0451/08 03 0200 08 03 0249/08 03 0165
chapter 1/p. 17 X*
Crimp Neck Vials ND11, Micro-Inserts and Seals11 09 0356/11 09 047611 09 0477/11 14 119011 09 0921/11 09 0619
chapter 5/p. 25 X X X X X X X X X X X X X X
06 09 0357/06 09 124006 09 0865/06 09 1343
chapter 5/p. 25 X X X X X X X X X X X X X X
11 09 0415 (only for Pro-Star 410/420, Marathon)
chapter 5/p. 25 X X
11 03 0209/11 03 030011 03 0247/11 03 036211 03 0196
chapter 5/p. 26 X X X X X X X X X X X X X X
Screw Neck Vials ND8, Micro-Inserts and Seals11 09 0210/11 09 025911 09 0419/11 09 0382
chapter 2/p. 18 X X X X X X X X X X X X X X
05 09 0129/05 09 0968 chapter 2/p. 18 X X X X X X X X X X X X X X11 09 0417 (only for Pro-Star 410/420, Marathon)
chapter 2/p. 18 X X X X X X X X
08 15 0460/08 15 029308 15 0427/08 15 0294
chapter 2/p. 19 X X X X X X X X X X X X X X
Short Thread Vials ND9, Micro-Inserts and Seals11 09 0500/11 09 051911 09 0520/11 14 118911 09 0999/11 09 124111 09 1242/11 09 0620
chapter 3/p. 21 X X X X X X X X X X X X X X X
06 09 0357/06 09 124006 09 0865/06 091343
chapter 3/p. 21 X X X X X X X X X X X X X X X
11 19 0932/11 19 1216 chapter 7/p. 30 X X X X X X X X09 15 1176/09 15 117809 15 1177/09 15 1179
chapter 3/p. 22 X X X X X X X X X X X X X X X
Screw Neck Vials ND10, Micro-Inserts and Seals10 09 0743/10 09 119610 09 1197
chapter 4/p. 24 X X X X
06 09 0357/06 09 124006 09 0865/06 091343
chapter 4/p. 24 X X X X
10 15 1256/10 15 125710 15 0744/10 15 1258
chapter 4/p. 24 X X X X
Snap Ring Vials ND11, Micro-Inserts and Seals11 09 0627/11 09 064411 09 0645/11 14 1190/
chapter 6/p. 28 X X X X X X
06 09 0357/06 09 124006 09 0865/06 091343
chapter 6/p. 28 X X X X X X
11 19 0933/11 19 1217 chapter 7/p. 30 X X X X X X11 15 0635/11 15 063711 15 0636/11 15 0650
chapter 6/p. 29 X X X X X X
Screw Neck Vials ND13 and Seals13 09 0222/13 09 028013 09 1335/13 09 1336
chapter 8/p. 31 X
13 15 0456/13 15 081513 15 0292/13 15 1293
chapter 8/p. 31 X
Headspace Vials and Seals ND20/ND1820 09 0801 chapter 10/p. 36 X X20 09 0802 chapter 10/p. 36 X X20 09 0342 chapter 10/p. 36 X X20 09 1405/20 09 1691 chapter 10/p. 36 X X X X X20 09 0873/20 09 1690 chapter 10/p. 36 X20 09 0795/20 09 0796 chapter 10/p. 36 X20 09 0297/20 09 044020 09 1223
chapter 10/p. 36 X
20 03 0975/20 03 1536 chapter 10/p. 38 X22 15 1334 chapter 10/p. 39 X X20 03 0901/20 03 014220 03 0030
chapter 10/p. 38 X X X X
18 09 1307/18 09 131118 09 1306/18 09 1310
chapter 10/p. 36 X
18 03 1578/18 03 130918 03 1414/18 03 1416
chapter 10/p. 40 X
Screw Neck Vials ND24 and Seals24 09 0402/24 09 0928 chapter 12/p. 42 X X24 04 0842/24 04 0841 chapter 12/p. 43 X X24 08 0403/24 08 0592 chapter 12/p. 43 X X22 02 1108 chapter 12/p. 43 X X
X*: only for ProStar 420
HPLC GC HS TOCApplication:
Qui
ck-R
efer
ence
-Cha
rts
According to our information our Quick-Reference-Charts were correct when being printed. Please note that later changes in manufacturers’ specifications may lead to different compatibilities.
68
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
LA-PHA-PACK®
AutosamplerCompatibilityChart
08 09 0405 08 09 0406
08 09 0284 08 09 0845 08 09 0953
08 09 0276 08 09 0606
08 09 025808 09 0305
08 09 1080 11 09 0210 11 09 0259 11 09 0382 11 09 0419
11 09 0417 11 09 0500 11 09 0519 11 09 0520 11 09 0620 11 09 0999 11 09 124111 09 124211 14 118911 14 126511 14 165511 14 169411 19 093211 19 102111 19 120511 19 1216
10 09 0743 10 09 1196 10 09 1197
11 09 0184 11 09 0356 11 09 0476 11 09 047711 09 061911 09 0921
11 09 0486 11 09 0415 11 09 0831
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 2 page 16
chapter 2 page 18
chapter 2 page 18
chapter 3, page 21
730
chapter 4page 24
chapter 5 page 25, 26
chapter 5 page 25
chapter 5 page 25
chapter 5 page 26
Aut
osam
pler
Com
patib
ility
Cha
rt
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Scre
w N
eck
ND8
Scre
w N
eck
ND8
Shor
t Thr
ead
ND9
Scre
w N
eck
ND1
0Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1
Scre
w N
eck
ND8
Agilent 1050 X X XAgilent 1090 X X XAgilent 1100 X XAgilent G1888A Agilent 7673A X X X XAgilent 7683A X X X XAgilent HS7694Agilent 7695AAgilent 79855(A) X XAgilent 5880 X XAgilent 5890 X XAgilent 6850 X XAgilent 6890 X XAI 42 vial tray X X X X X XAI 60 vial tray X X X X X XAI CTC A200S X X X X XA.I. HeadspaceAIM CPS-100 X X XAIM CPS-200 X X XAlcott 708 ALAlcott 728Alcott 738 X X X XAlcott 719 AL X X X XAlcott 719 D / D-PCS X X X XAnalytik Jena multi N/C 3000 (TOC)Antec Levden AS 100 X X X XAntek 736 Unisampler X X X XAntek 738 X X X XBeckman 501 X X X X XBeckman 502 / 502e X X X X XBeckman 504 X XBeckman 507 / 507e X X X X X XBeckman 508 (System Gold) XBeckman Marathon X X X X XBeckman Promis X X X X XBeckman Triathlon,Standard Tray X X X X X XBeckman Triathlon, LSV Tray XBeckman Triathlon, Super-LSV TrayBeckman Triathlon, Micro-Tray X XBruker LC51Carlo Erba AS100 X X X X X X X X XCarlo Erba A200LC X X X X X X XCarlo Erba AS200S X X X X X X XCarlo Erba AS300 X X X X X X X X XCarlo Erba AS800, 42 vial tray X X X X X XCarlo Erba AS800, 60vial tray X X X X X XCarlo Erba HS250Carlo Erba HS500Carlo Erba HS800Carlo Erba HS850Cecil Instruments CE4800 X X X XCTC LC PAL X X X X X XCTC HTC PAL X X X X X XCTC HTS PAL X X X X X XCTC Combi PAL X X X XCTC GC PAL X X X XCTC A200S X X X X XCTC AS200 X X X XCTC HS 500Dani ALS 39.80 X XDani ALS 86.80 X XDani ALS 1000 X XDani HS39.50Dani HS86.50Dimatoc 2000Dionex Gina 50 X X XDionex AS 50 X X XDionex ASI 100 ( T) X X X XDionex ASE 200D-Star DAS 10 X XDynatech 42 vial tray X X X X X XDynatech 60 vial tray X X X X X X
69
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
LA-PHA-PACK®
AutosamplerCompatibilityChart
11 09 0627 11 09 0644 11 09 0645 11 14 1190 11 14 126611 14 1656 11 14 1695 11 19 093311 19 102211 19 1217
13 09 0222 13 09 0280 13 09 1335 13 09 1336
08 14 0641 08 14 0513 08 14 0595
11 14 0544 11 14 0545
15 14 0548 15 14 0562
20 09 0342 20 09 140520 09 1691
18 09 086420 09 0297 20 09 0440 20 09 1223
20 09 0795 20 09 0796
18 09 1306 18 09 1307 18 09 1310 18 09 131120 09 0873 20 09 1222 20 09 1690
20 09 0801 20 09 0802 24 09 0402 24 09 0589 24 09 0839 24 09 0923 24 09 0927 24 09 0928 24 09 1089 24 09 1090
chapter 5, 6page 25,28
730
chapter 8 page 31
chapter 9 page 33
chapter 9 page 33
chapter 9 page 34
chapter 9 page 33
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 12 page 42
Aut
osam
pler
Com
patib
ility
Cha
rt
Scre
w N
eck
ND1
3Sh
ell V
ials
Shel
l Via
ls
Shel
l Via
ls
Shel
l Via
ls
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)Sc
rew
Nec
k Vi
als
ND2
4 (E
PA)
Snap
Rin
g N
D11
XXX
XX
XX
X
X
X X
XX
X XX X XX
XXXXXX
XX
XXX X X
XX
XX XX X
X X
XXX
XXXXX
X X
XXXX
XX
XX XX XX X
X
Agilent 1050Agilent 1090Agilent 1100Agilent G1888AAgilent 7673AAgilent 7683AAgilent HS7694Agilent 7695AAgilent 79855(A)Agilent 5880Agilent 5890Agilent 6850Agilent 6890AI 42 vial trayAI 60 vial trayAI CTC A200SA.I. HeadspaceAIM CPS-100AIM CPS-200Alcott 708 ALAlcott 728Alcott 738Alcott 719 ALAlcott 719 D / D-PCSAnalytik Jena multi N/C 3000 (TOC)Antec Levden AS 100Antek 736 UnisamplerAntek 738Beckman 501Beckman 502 / 502eBeckman 504Beckman 507 / 507eBeckman 508 (System Gold)Beckman MarathonBeckman PromisBeckman Triathlon,Standard TrayBeckman Triathlon, LSV TrayBeckman Triathlon, Super-LSV TrayBeckman Triathlon, Micro-TrayBruker LC51Carlo Erba AS100Carlo Erba A200LCCarlo Erba AS200SCarlo Erba AS300Carlo Erba AS800, 42 vial trayCarlo Erba AS800, 60vial trayCarlo Erba HS250Carlo Erba HS500Carlo Erba HS800Carlo Erba HS850Cecil Instruments CE4800CTC LC PALCTC HTC PALCTC HTS PALCTC Combi PALCTC GC PALCTC A200SCTC AS200CTC HS 500Dani ALS 39.80Dani ALS 86.80Dani ALS 1000Dani HS39.50Dani HS86.50Dimatoc 2000Dionex Gina 50Dionex AS 50Dionex ASI 100 ( T)Dionex ASE 200D-Star DAS 10Dynatech 42 vial trayDynatech 60 vial tray
70
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
08 09 0405 08 09 0406
08 09 0284 08 09 0845 08 09 0953
08 09 0276 08 09 0606
08 09 025808 09 0305
08 09 1080 11 09 0210 11 09 0259 11 09 0382 11 09 0419
11 09 0417 11 09 0500 11 09 0519 11 09 0520 11 09 0620 11 09 0999 11 09 124111 09 124211 14 118911 14 126511 14 165511 14 169411 19 093211 19 102111 19 120511 19 1216
10 09 0743 10 09 1196 10 09 1197
11 09 0184 11 09 0356 11 09 0476 11 09 047711 09 061911 09 0921
11 09 0486 11 09 0415 11 09 0831
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 2 page 16
chapter 2 page 18
chapter 2 page 18
chapter 3, page 21
730
chapter 4page 24
chapter 5 page 25, 26
chapter 5 page 25
chapter 5 page 25
chapter 5 page 26
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Scre
w N
eck
ND8
Scre
w N
eck
ND8
Shor
t Thr
ead
ND9
Scre
w N
eck
ND1
0Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1
Scre
w N
eck
ND8
Dynatech LC2000 XDynatech GC111 X X XDynatech GC311 X X XEST Analytical Cobra L/S GC Autosampler;
120 vial trayX X X X
EST Analytical Cobra L/S GC Autosampler; 60 vial tray
EST Analytical Markelov HS9000EST Analytical Archon P/TFinnigan A200S X X X X XFisons AS100 X X X X X X X X XFisons A200LC X X X X X X XFisons AS200S X X X X X X XFisons AS300 X X X X X X X X XFisons AS800, 42 vial tray X X X X X XFisons AS800, 60vial tray X X X X X XFisons HS250Fisons HS500Fisons HS800Fisons HS850GBC Avanta Ultra Z X XGE Instruments Sievers® 900Gerstel MPS2 X X X X XGilson 201/202 X XGilson 221/222 X XGilson 231/401 X XGilson 232/402 X XGilson Aspec X XGilson Aspec Xli X XGilson Aspec XL4 X XGilson 221XL/222XL X X (only f.
221XL)X
Gilson 223 X XGilson 231XL/232XL/ 233XL X X (only f.
231XL)X
Gilson Nano Injektor X X Gilson 235/235P/SP 235/SP 235P X X X XGynkotek Gina 50 X X XHTA HT200HHTA HT300A X XHTA HT300L X XICI LC1600 X X XJasco AS 2055/AS 2055 (i) X X X X XJasco AS 2057 (i) X X X X XJasco AS 2059 X X X X XKnauer K-3800 (Basic Marathon) X X X X XKonik -Tech Robokrom Static HSKonik -Tech Robokrom HRGC X X XKonik -Tech Robokrom HPLC X X X X X XKontron MSI 660 XKontron 360, 460 X X X X X XLDC 713-60 X XLDC Marathon X X X X XLDC Promis X X X X XLEAP A200S X X X X XLEAP LC PAL X X X X X XLEAP HTC PAL X X X X X XLEAP HTS PAL X X X X X XLEAP Combi PAL X X X XOI Analytical 1020APerkin Elmer Series 200, 25 vial trayPerkin Elmer Series 200, 85 vial tray X XPerkin Elmer Series 200, 81/100 vial tray X XPerkin Elmer Series 200, 205 vial tray X X XPerkin Elmer Series 200, 225 vial tray XPerkin Elmer AI-1 X X XPerkin Elmer AS-100/AS-100B X X XPerkin Elmer AS2000/AS2000B X X X XPerkin Elmer AS-300 X X XPerkin Elmer AS8300 X X XPerkin Elmer Autosystem X X X XPerkin Elmer HS6
71
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
11 09 0627 11 09 0644 11 09 0645 11 14 1190 11 14 126611 14 1656 11 14 1695 11 19 093311 19 102211 19 1217
13 09 0222 13 09 0280 13 09 1335 13 09 1336
08 14 0641 08 14 0513 08 14 0595
11 14 0544 11 14 0545
15 14 0548 15 14 0562
20 09 0342 20 09 140520 09 1691
18 09 086420 09 0297 20 09 0440 20 09 1223
20 09 0795 20 09 0796
18 09 1306 18 09 1307 18 09 1310 18 09 131120 09 0873 20 09 1222 20 09 1690
20 09 0801 20 09 0802 24 09 0402 24 09 0589 24 09 0839 24 09 0923 24 09 0927 24 09 0928 24 09 1089 24 09 1090
chapter 5, 6page 25,28
730
chapter 8 page 31
chapter 9 page 33
chapter 9 page 33
chapter 9 page 34
chapter 9 page 33
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 12 page 42
Scre
w N
eck
ND1
3Sh
ell V
ials
Shel
l Via
ls
Shel
l Via
ls
Shel
l Via
ls
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)Sc
rew
Nec
k Vi
als
ND2
4 (E
PA)
Snap
Rin
g N
D11
X
XX
X XX X
X X
XXX
XX X
XX X
X XX XXXX X
X XX
X X
XXXX X
X X
XX
X
XX
XXX
X XX
XX
X X
Dynatech LC2000Dynatech GC111Dynatech GC311EST Analytical Cobra L/S GC Autosampler;
120 vial trayEST Analytical Cobra L/S GC Autosampler;
60 vial trayEST Analytical Markelov HS9000EST Analytical Archon P/TFinnigan A200SFisons AS100Fisons A200LCFisons AS200SFisons AS300Fisons AS800, 42 vial trayFisons AS800, 60vial trayFisons HS250Fisons HS500Fisons HS800Fisons HS850GBC Avanta Ultra ZGE Instruments Sievers® 900Gerstel MPS2Gilson 201/202Gilson 221/222Gilson 231/401Gilson 232/402Gilson AspecGilson Aspec XliGilson Aspec XL4Gilson 221XL/222XL
Gilson 223Gilson 231XL/232XL/ 233XL
Gilson Nano InjektorGilson 235/235P/SP 235/SP 235PGynkotek Gina 50HTA HT200HHTA HT300AHTA HT300LICI LC1600Jasco AS 2055/AS 2055 (i)Jasco AS 2057/AS 2057 (i)Jasco AS 2059Knauer K-3800 (Basic Marathon)Konik -Tech Robokrom Static HSKonik -Tech Robokrom HRGCKonik -Tech Robokrom HPLCKontron MSI 660Kontron 360, 460LDC 713-60LDC MarathonLDC PromisLEAP A200SLEAP LC PALLEAP HTC PALLEAP HTS PALLEAP Combi PALOI Analytical 1020APerkin Elmer Series 200, 25 vial trayPerkin Elmer Series 200, 85 vial trayPerkin Elmer Series 200, 81/100 vial trayPerkin Elmer Series 200, 205 vial trayPerkin Elmer Series 200, 225 vial trayPerkin Elmer AI-1Perkin Elmer AS-100/AS-100BPerkin Elmer AS2000/AS2000BPerkin Elmer AS-300Perkin Elmer AS8300Perkin Elmer AutosystemPerkin Elmer HS6
72
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
08 09 0405 08 09 0406
08 09 0284 08 09 0845 08 09 0953
08 09 0276 08 09 0606
08 09 025808 09 0305
08 09 1080 11 09 0210 11 09 0259 11 09 0382 11 09 0419
11 09 0417 11 09 0500 11 09 0519 11 09 0520 11 09 0620 11 09 0999 11 09 124111 09 124211 14 118911 14 126511 14 165511 14 169411 19 093211 19 102111 19 120511 19 1216
10 09 0743 10 09 1196 10 09 1197
11 09 0184 11 09 0356 11 09 0476 11 09 047711 09 061911 09 0921
11 09 0486 11 09 0415 11 09 0831
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 2 page 16
chapter 2 page 18
chapter 2 page 18
chapter 3, page 21
730
chapter 4page 24
chapter 5 page 25, 26
chapter 5 page 25
chapter 5 page 25
chapter 5 page 26
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Scre
w N
eck
ND8
Scre
w N
eck
ND8
Shor
t Thr
ead
ND9
Scre
w N
eck
ND1
0Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1
Scre
w N
eck
ND8
Perkin Elmer HS40/HS100/101Perkin Elmer TurboMatrix HS16/HS40/
HS40 XL/HS40 Trap/ HS110/HS110 Trap
Perkin Elmer Integral 4000 X XPerkin Elmer ISS-100, 85 vial tray X XPerkin Elmer ISS-100, 100 vial tray X XPerkin Elmer ISS-200, 85 vial tray X XPerkin Elmer ISS-200, 100 vial tray X XPerkin Elmer ISS-200, 145 vial tray XPerkin Elmer LC 600, 42 vial tray XPerkin Elmer LC 600, 60 vial tray X XPerkin Elmer Clarus 500 X XPharmacia LKB 2157-010 X X XPharmacia LKB 2157-020 X X XPolymer Laboratories PL-AS RT X X X XQuma Elektronik QHSS-40Sedere X XSGE LS-3200 X XShimadzu AOC-5000 (Combi PAL) X X X X XShimadzu AOC-14/1400 X X X X X XShimadzu AOC-17 X X X X X XShimadzu AOC-20 / 20i / 20s X X X X X XShimadzu LC-10A X X X X X XShimadzu SIL-2AS X X X X X X XShimadzu SIL-6A X X X X X X XShimadzu SIL-6B / SIL-7A / SIL-8A / SIL-9A X X X X X XShimadzu SIL-10A / SIL-10AF / SIL-10AP /
SIL-10Ai / SIL-10AxLX X X X X X
Shimadzu SIL-10ADvp X X X X X XShimadzu SIL-HT X X X X X XShimadzu SIL-20A (Prominence)
105 vial trayX X X X X X
Shimadzu SIL-20A/Sil-20AC (Prominence) 175 vial tray
Shimadzu SIL-20A/Sil-20AC (Prominence) 50 vial tray
Shimadzu SIL-20AC (Prominence) 70 vial tray
X X X X X X
Shimadzu LC-2010 X X X X X XShimadzu ASI-VSievers (GE Instruments)
Sievers® 900
Spark Marathon X X X X XSpark Midas X X X X X XSpark Promis X X X X XSpark SPH 125 X X X XSpark Triathlon, Standard Tray X X X X X XSpark Triathlon, LSV Tray XSpark Triathlon, Super-LSV TraySpark Triathlon, Micro-Tray X XSpectra-Physics 8875 X X XSpectra-Physics 8880 X X XSpectra-Physics SpectraSYSTEM AS1000 X X X X X X X XSpectra-Physics SpectraSYSTEM AS3000 X X X X X X X X X XSpectra-Physics SpectraSYSTEM AS3500 X X X X X X X XSykam S 5200 XTalbot X XTekmar-Dohrmann 7000 / 7000HT / 7050Tekmar-Dohrmann AQUATek 70 / SOLATek 72TM XTekmar-Dohrmann HT3Tekmar-Dohrmann STS 8000 TOCThermo AS100 X X X X X X X X XThermo AS1000 (Trace GC) X X X X X X X XThermo AS2000 X X XThermo AS2000 30 vial tray Thermo AS2000 90 vial tray (Trace GC) X X X X X X XThermo AI3000/AS3000/ AS3500
(Trace GC + Focus GC)X X X X X X X X X X
Thermo A200LC X X X X X X X X XThermo SpectraSYSTEM AS1000 X X X X X X X X
73
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
11 09 0627 11 09 0644 11 09 0645 11 14 1190 11 14 126611 14 1656 11 14 1695 11 19 093311 19 102211 19 1217
13 09 0222 13 09 0280 13 09 1335 13 09 1336
08 14 0641 08 14 0513 08 14 0595
11 14 0544 11 14 0545
15 14 0548 15 14 0562
20 09 0342 20 09 140520 09 1691
18 09 086420 09 0297 20 09 0440 20 09 1223
20 09 0795 20 09 0796
18 09 1306 18 09 1307 18 09 1310 18 09 131120 09 0873 20 09 1222 20 09 1690
20 09 0801 20 09 0802 24 09 0402 24 09 0589 24 09 0839 24 09 0923 24 09 0927 24 09 0928 24 09 1089 24 09 1090
chapter 5, 6page 25,28
730
chapter 8 page 31
chapter 9 page 33
chapter 9 page 33
chapter 9 page 34
chapter 9 page 33
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 12 page 42
Scre
w N
eck
ND1
3Sh
ell V
ials
Shel
l Via
ls
Shel
l Via
ls
Shel
l Via
ls
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)Sc
rew
Nec
k Vi
als
ND2
4 (E
PA)
Snap
Rin
g N
D11
X XX X
X
X
X
X XX
X
X XXXX
X XX X XX X XX X X XX X X X X
X X X X XX XX
X
X X
X
X X XXX
X XX XXXX X X
XX
XXX XX X XX XXX
X
X XX
X X
XX
X
X XX X
Perkin Elmer HS40/HS100/101Perkin Elmer TurboMatrix HS16/HS40/
HS40 XL/HS40 Trap/ HS110/HS110 Trap
Perkin Elmer Integral 4000Perkin Elmer ISS-100, 85 vial trayPerkin Elmer ISS-100, 100 vial trayPerkin Elmer ISS-200, 85 vial trayPerkin Elmer ISS-200, 100 vial trayPerkin Elmer ISS-200, 145 vial trayPerkin Elmer LC 600 42 vial trayPerkin Elmer LC 600 60 vial trayPerkin Elmer Clarus 500Pharmacia LKB 2157-010Pharmacia LKB 2157-020Polymer Laboratories PL-AS RTQuma Elektronik QHSS-40SedereSGE LS-3200Shimadzu AOC-5000 (Combi PAL)Shimadzu AOC-14/1400Shimadzu AOC-17Shimadzu AOC-20 / 20i / 20sShimadzu LC-10AShimadzu SIL-2ASShimadzu SIL-6AShimadzu SIL-6B / SIL-7A / SIL-8A / SIL-9AShimadzu SIL-10A / SIL-10AF / SIL-10AP /
SIL-10Ai / SIL-10AxLShimadzu SIL-10ADvpShimadzu SIL-HTShimadzu SIL-20A (Prominence)
105 vial trayShimadzu SIL-20A/Sil-20AC (Prominence)
175 vial trayShimadzu SIL-20A/Sil-20AC (Prominence)
50 vial trayShimadzu SIL-20AC (Prominence)
70 vial trayShimadzu LC-2010Shimadzu ASI-VSievers (GE Instruments)
Sievers® 900
Spark MarathonSpark MidasSpark PromisSpark SPH 125Spark Triathlon, Standard TraySpark Triathlon, LSV TraySpark Triathlon, Super-LSV TraySpark Triathlon, Micro-TraySpectra-Physics 8875Spectra-Physics 8880Spectra-Physics SpectraSYSTEM AS1000Spectra-Physics SpectraSYSTEM AS3000Spectra-Physics SpectraSYSTEM AS3500Sykam S 5200TalbotTekmar-Dohrmann 7000 / 7000HT / 7050Tekmar-Dohrmann AQUATek 70 / SOLATek 72TMTekmar-Dohrmann HT3Tekmar-Dohrmann STS 8000 TOCThermo AS100Thermo AS1000 (Trace GC)Thermo AS2000Thermo AS2000 30 vial tray Thermo AS2000 90 vial tray (Trace GC)Thermo AI3000/AS3000/ AS3500
(Trace GC + Focus GC)Thermo A200LCThermo SpectraSYSTEM AS1000
74
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
08 09 0405 08 09 0406
08 09 0284 08 09 0845 08 09 0953
08 09 0276 08 09 0606
08 09 025808 09 0305
08 09 1080 11 09 0210 11 09 0259 11 09 0382 11 09 0419
11 09 0417 11 09 0500 11 09 0519 11 09 0520 11 09 0620 11 09 0999 11 09 124111 09 124211 14 118911 14 126511 14 165511 14 169411 19 093211 19 102111 19 120511 19 1216
10 09 0743 10 09 1196 10 09 1197
11 09 0184 11 09 0356 11 09 0476 11 09 047711 09 061911 09 0921
11 09 0486 11 09 0415 11 09 0831
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 1 page 16
chapter 2 page 16
chapter 2 page 18
chapter 2 page 18
chapter 3, page 21
730
chapter 4page 24
chapter 5 page 25, 26
chapter 5 page 25
chapter 5 page 25
chapter 5 page 26
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Crim
p N
eck
ND8
Scre
w N
eck
ND8
Scre
w N
eck
ND8
Shor
t Thr
ead
ND9
Scre
w N
eck
ND1
0Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1Cr
imp
Nec
k N
D11
Crim
p N
eck
ND1
1
Scre
w N
eck
ND8
Thermo SpectraSYSTEM AS3000 X X X X X X X X X XThermo SpectraSYSTEM AS3500 X X X X X X X XThermo A200S X X X X X X XThermo Combi PalThermo HS250Thermo HS500Thermo HS800Thermo HS850Thermo HS2000Thermo TriPlus (=GC PAL) (AS+Duo) X X X X XThermo TriPlus HS (=GC PAL) Thermo HiPerTOCTosoh AS-8010 X XTosoh TSK-6080 X XTracor 770 / 771 / 772 X X XTSP 8875 X X XTSP 8880 X X XTSP SpectraSYSTEM AS1000 X X X X X X X XTSP SpectraSYSTEM AS3000 X X X X X X X X X XTSP SpectraSYSTEM AS3500 X X X X X X X XUnicam 4247 X X XUnicam 4710 X X XUnicam 4700 (GC) X XUnicam 4700 (LC) X X X X XUnicam LC-XP X X X X XUnicam S4 / S8 X XVarian ProStar 400, 410, 420,
Standard TrayX X X X X X
Varian ProStar 400, 410, 420, LSV Tray X X X XVarian ProStar 400, 410, 420,
Super LSV TrayX X X X
Varian Prostar 430 X X XVarian 8035 X X XVarian 8000 X X XVarian 8400 X X X XVarian 8410 X X X XVarian 8100 X X X XVarian 8200 X X X X X Varian CP-910, 911, 912 X X XVarian CP-940, 941 XVarian LC9090 / LC 9095 / LC 9100 X X XVarian ArchonVarian CombiPALVarian GenesisVarian Marathon X X X X XVarian Vista X XVarian CP-9020 / CP-9025 Varian CP-9060Varian CP-9010 X XViscotek VortexTMViscotek GPC Autosampler X X XVWR (Merck®)/Hitachi AS 2000 X XVWR (Merck®)/Hitachi AS 4000 X X XVWR (Merck®)/Hitachi AS 6000 X XVWR (Merck®)/Hitachi LaChrom + LaChrom Elite® AS XWaters® ACQUITY™ UPLC Systeme X X X
Waters® Wisp 48 positionWaters® Wisp 96 positionWaters® 717Waters® Alliance® X X XWaters® Alliance® GPC 2000Waters® Alliance® HT Syst. X X XWaters® Alliance® 2790/2795 X X XWaters® Alliance® 2690/2695 X (nicht für
11 09 0620)X X
75
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
According to our information our compatibility chart was correct when it was printed. Please note that later changes in manufacturers’ specifications may lead to different compatibilities.
Aut
osam
pler
Com
patib
ility
Cha
rt
LA-PHA-PACK®
AutosamplerCompatibilityChart
11 09 0627 11 09 0644 11 09 0645 11 14 1190 11 14 126611 14 1656 11 14 1695 11 19 093311 19 102211 19 1217
13 09 0222 13 09 0280 13 09 1335 13 09 1336
08 14 0641 08 14 0513 08 14 0595
11 14 0544 11 14 0545
15 14 0548 15 14 0562
20 09 0342 20 09 140520 09 1691
18 09 086420 09 0297 20 09 0440 20 09 1223
20 09 0795 20 09 0796
18 09 1306 18 09 1307 18 09 1310 18 09 131120 09 0873 20 09 1222 20 09 1690
20 09 0801 20 09 0802 24 09 0402 24 09 0589 24 09 0839 24 09 0923 24 09 0927 24 09 0928 24 09 1089 24 09 1090
chapter 5, 6page 25,28
730
chapter 8 page 31
chapter 9 page 33
chapter 9 page 33
chapter 9 page 34
chapter 9 page 33
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 10 page 36
chapter 12 page 42
Scre
w N
eck
ND1
3Sh
ell V
ials
Shel
l Via
ls
Shel
l Via
ls
Shel
l Via
ls
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)H
eads
pace
ND2
0 (N
D18)
Hea
dspa
ce N
D20
(ND1
8)Sc
rew
Nec
k Vi
als
ND2
4 (E
PA)
Snap
Rin
g N
D11
X X XX X
X XXXX
XX
X XX
XX X
XXX XX X XX X
X
X
XX X X
X
X XX X X
XX
X X XX X X X
X
XX
X
XXXX XX X (für 24 Posi-
tion Plate)
X XX
X XX
X XXXX
Thermo SpectraSYSTEM AS3000Thermo SpectraSYSTEM AS3500Thermo A200S Thermo Combi PalThermo HS250Thermo HS500Thermo HS800Thermo HS850Thermo HS2000Thermo TriPlus (=GC PAL) (AS/HS/Duo)Thermo TriPlus HS (=GC PAL) Thermo HiPerTOCTosoh AS-8010Tosoh TSK-6080Tracor 770 / 771 / 772TSP 8875TSP 8880TSP SpectraSYSTEM AS1000TSP SpectraSYSTEM AS3000TSP SpectraSYSTEM AS3500Unicam 4247Unicam 4710Unicam 4700 (GC)Unicam 4700 (LC)Unicam LC-XPUnicam S4 / S8Varian ProStar 400, 410, 420,
Standard TrayVarian ProStar 400, 410, 420, LSV TrayVarian ProStar 400, 410, 420,
Super LSV TrayVarian Prostar 430Varian 8035Varian 8000Varian 8400Varian 8410Varian 8100Varian 8200Varian CP-910, 911, 912Varian CP-940, 941Varian LC9090 / LC 9095 / LC 9100Varian ArchonVarian CombiPALVarian GenesisVarian MarathonVarian VistaVarian CP-9020 / CP-9025 Varian CP-9060Varian CP-9010Viscotek VortexTMViscotek GPC AutosamplerVWR (Merck®)/Hitachi AS 2000VWR (Merck®)/Hitachi AS 4000VWR (Merck®)/Hitachi AS 6000VWR (Merck®)/Hitachi LaChrom + LaChrom Elite® ASWaters® ACQUITY™ UPLC Systeme
Waters® Wisp 48 positionWaters® Wisp 96 positionWaters® 717Waters® Alliance® Waters® Alliance® GPC 2000Waters® Alliance® HT Syst.Waters® Alliance® 2790/2795Waters® Alliance® 2690/2695
76
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
Chromacol
Chromacol La-Pha-Pack® Article-No.
02-CTVG / 500 08 09 060602-MTV / 1000 (alt.) 06 09 086502-MTVMP / 500 (alt.) 05 09 012902-MTVMP / 500 (alt.) 05 09 026902-MTVWG / 1000 06 09 066902-MTVWG / 1000 (alt.) 06 09 035702-NV / 1000 05 09 167403-CVG / 500 08 09 027603-FIRV(A) (alt.)03-FIV(A) (alt.)
11 14 1656
03-FISV / 500 11 09 099903-FISV(A) (alt.) 11 14 165503-FIV / 500 11 09 092103-NV / 1000 06 09 086603-PECV / 500 (alt.) 11 19 093303-PESV / 500 (alt.) 11 19 093205-CTV(A) 08 09 108007-CPV / 500 08 09 030507-CPV(A) / 500 08 09 025808-CPV / 500 08 09 040508-CPV(A) / 500 08 09 040608-CV / 500 08 09 028409-CTV / 500 11 09 04861.1-CTVG / 500 11 09 04151.1-STVG / 500 11 09 04171.2-CWV / 500 08 09 08451.5-HRCV / 100 11 09 06191.5-HRSV / 100 11 09 062010-CV (alt.) 20 09 079510-CV / 125 20 09 140510-HSV / 125 18 09 130611-6RT1 / 500 11 02 053411-AC(B)-ST144 / 500 11 03 066711-AC6 / 500 (alt.) 11 03 030011-AC6(B) / 500 (alt.)11-AC7(B) / 500 (alt.)
11 03 0303
11-AC6(G) / 500 (alt.)11-AC7(G) / 500 (alt.)
11 03 0301
11-AC6(GO) / 500 (alt.)11-AC7(GO) / 500 (alt.)
11 03 0304
11-AC6(R) / 500 (alt.)11-AC7(R) / 500 (alt.)
11 03 0302
11-AC7 / 500 11 03 020911-AC-CBT1 / 500 (alt.) 11 03 164111-AC-ST101 / 500 11 03 088511-AC-ST101 / 500 (alt.) 11 03 058811-AC-ST101X / 500 11 03 046411-AC-ST15 / 500 11 03 036211-ACT / 1000 11 03 033911-AC-TST1 / 500 11 03 019611AC-V1 / 500 11 03 072011-MCBC-SR15 / 500 (alt.) 11 03 031811-PEC111-PEC1X (alt.)11-PSN(B) / 500 (alt.)11-PSN(B)-T02 / 500 (alt.)
11 08 1676
11-PEC-8RT1 / 1000 13 15 055311-PEC-ST1 / 1000 13 15 099611-PSN(B)-8RT1 / 500 11 15 126711-PSN(B)-ST1 / 50011-PSN(B)-ST101 / 500 (alt.)
11 15 1151
11-PSN(B)-ST1X / 500 11 15 126911-PSN(B)-TST1 / 500 11 15 126811-PSN(Y)-8RT1 / 500 11 15 155611-ST14 / 500 (alt.) 11 02 010411-ST15 / 500 11 02 014011-T02 / 1000 11 02 017612-6RT1 / 500 12 02 022312-NPEP4 / 1000 12 08 0546
Chromacol La-Pha-Pack® Article-No.
12-SC / 500 13 08 016612-SC(W) / 500 13 08 063912-SC-8RT1 / 500 13 15 045612-SCS / 500 13 08 033612-SC-ST2 / 500 (alt.) 13 15 081512-ST101 / 500 12 02 088312-St101 / 500 (alt.)12-ST143 / 500
12 02 0608
12-ST2 / 500 (alt.)12-ST18 / 500 (alt.)
12 02 0143
12-SV 15 09 165712-T02 / 1000 12 02 016818-MSC-CBT3 / 500 18 03 141618-MSC-ST101 / 500 (alt.) 18 03 130918-MSC-ST101 / 500 (alt.) 18 03 157818-MSC-ST3 / 500 18 03 141418-SC / 500 18 08 051618-ST3 / 500 (alt.) 16 02 08701-NMV-C / 500 08 14 06411-NWV / 500 08 09 04831-NWV(A)-C / 200 08 14 05951-NWV(A)-C / 200 08 27 16711-NWV-C / 200 08 14 05131-NWV-C / 200 08 27 16702.5-CV / 500 11 09 08312.5-NV / 500 11 09 053720-AC(B)-ST3 / 500 20 03 055420-AC(R)-ST3 / 500 20 03 115920-ACB / 500 20 01 040820-AC-CBT3 / 500 20 03 005920-AC-ST3 / 500 20 03 014220-AC-ST3 / 500 (alt.) 20 03 148920-AS3 / 50020-ASH3 (alt.) / 500
20 02 0335
20-B3P / 500 20 10 029020-CB3 / 1000 20 02 012220-CBT3 / 1000 20 02 005720-CBT3B / 1000 20 02 003520-CV (alt.) 20 09 079620-CV / 125 20 09 087320-CV(A) (alt.) / 125 20 09 122320-EPASV / 100 24 09 058920-EPASV(A) / 100 24 09 092720-HSV / 125 18 09 130720-HSVST-CP / 125 18 33 142620-HSVST-CP / 125 18 33 142820-MCBC / 500 (alt.)20-MCBC(N) / 500 (alt.)20-MCBC(R) / 500
20 01 1531
20-MCBC-ST3 / 500 (alt.)20-MCBC(N)-ST3 / 500 (alt.)20-MCBC(R)-ST3 / 500 (alt.)
20 03 1577
20-MCBC-ST3 / 500 (alt.)20-MCBC(N)-ST3 / 500 (alt.)20-MCBC(R)-ST3 / 500 (alt.)
20 03 0975
20-MCBC-ST3 / 500 (alt.)20-MCBC(N)-ST3 / 500 (alt.)20-MCBC(R)-ST3 / 500
20 03 1536
20-ST101 / 500 (alt.)20-ST15 / 500 (alt.)
19 02 0693
20-ST3 / 500 20 02 014120-ST3 / 500 (alt.) 20 02 148820-ST3HT / 100 20 02 063822-CV / 125 20 09 029724-SC-EPA / 100 24 08 040324-SCST / 100 (alt.) 24 04 084124-ST3-EPA / 100 22 02 11082-CV / 5002-CVG / 500 (alt.)
11 09 0476
Chromacol La-Pha-Pack® Article-No.
2-CV(A) / 500 11 09 04772-CV(A)7-CP / 100 11 25 10972-CV(A)ST-CP / 100 11 25 12892-RV / 500 11 09 06442-RV(A) / 500 11 09 06452-SV / 5002-SVG / 500 (alt.)
11 09 0419
2-SV(A) / 500 11 09 03822-SVJ(W)101-CP / 100 (alt.) 11 24 11422-SVW / 500 11 09 05192-SVW(A) / 500 11 09 05202-SVW(A)8-CP / 100 11 24 15282-SVW(A)ST-CP / 100 11 24 134230-SF-02(N) / 100 (alt.) 25 16 035030-SF-02(N)P / 100 (alt.) 25 16 155030-SF-02(PV) / 100 (alt.) 25 16 155230-SF-02(RC) / 100 (alt.)30-SF-02(CA) / 100 (alt.)
25 16 0348
30-SF-02(T) / 100 (alt.) 25 16 034630-SF-12(GMF) / 100 (alt.) 25 16 158730-SF-45(N) / 100 (alt.) 25 16 035130-SF-45(N)P / 100 (alt.) 25 16 155130-SF-45(PV) / 100 (alt.) 25 16 155330-SF-45(RC) / 100 (alt.)30-SF-45(CA) / 100 (alt.)
25 16 0349
30-SF-45(T) / 100 (alt.) 25 16 034730-SF-45(T)P / 100 (alt.) 25 16 154740-EPASV / 10040-SV / 100
24 09 0402
40-EPASV(A) / 10040-SV(A) / 100
24 09 0928
4-NWV(A)-C 15 14 05624-NWV(A)-C 15 27 10664-NWV-C / 100 15 14 05484-NWV-C / 100 15 27 10654-SV / 500 13 09 02224-SV(A) / 500 13 09 02806-CV / 125 20 09 03428-6RT1 / 1000 08 02 02328-AC(B)-ST144 / 500 (alt.) 08 03 02498-AC6 / 1000 (alt.) 08 03 02008-AC7 / 1000 08 03 04518-AC-ST101 / 500 08 03 08848-AC-ST101 / 500 (alt.) 08 03 05998-AC-ST101X / 500 08 03 11568-AC-ST15 / 500 08 03 01658-ACT / 1000 08 03 02688-AC-TST1 / 500 08 03 01138-AC-V1 / 500 08 03 08618-NPWP / 1000 08 08 04888-PEC18-PEC1X (alt.)
08 08 1675
8-PEC1-8RT1 09 15 07538-PEC1-ST1 / 1000 09 15 07568-SC / 500 08 08 00278SC(W) / 500 08 08 04368-SC-8RT1 / 500 08 15 04608-SCS / 500 08 08 04208-SC-ST101 / 500 08 15 08868-SC-ST101 / 500 (alt.) 08 15 07098-SC-ST15 / 500 08 15 04278-ST101 / 500 08 02 08818-ST101 / 500 (alt.)8-ST143 / 500 (alt.)
08 02 0563
8-ST14 / 500 (alt.) 08 02 01038-ST14X 08 15 14498-ST14X / 500 (alt.) 08 02 00398-ST14X / 500 (alt.) 08 02 14488-ST15 / 500 08 02 0009
Chromacol La-Pha-Pack® Article-No.
8-T02 / 1000 08 02 01778-TST1 / 5008-TST11 / 500 (alt.)
08 02 0005
9-CV (alt.) 20 09 08029-SC(B)-8RT1 / 500 09 15 08679-SC(B)-ST1 / 5009-SC(B)-ST101 / 500 (alt.)
09 15 0838
9-SC(B)-ST1X / 500 09 15 08699-SC(B)-TST1 / 500 09 15 08689-SC(BLK)-BST1 / 500 09 04 12209-SC(G)-8RT1 / 500 09 15 13569-SC(G)-ST1 / 500 09 15 13329-SC(GY)-BST1X / 500 (alt.) 09 04 15349-SC-(N)-8RT1 / 5009-SCJ(W)-8RT1 / 500 (alt.)
09 15 0478
9-SC-(N)-ST1 / 5009-SCJ(W)-ST101 / 500 (alt.)9-SCJ(W)-ST15 / 500 (alt.)
09 15 0481
9-SCJ(Y)-8RT1 / 500 (alt.) 09 15 15429-SCJ(Y)-ST15 / 500 (alt.)9-SCJ(Y)-ST101 / 500 (alt.)
09 15 1527
9-SCJ-8RT1 / 500 (alt.) 09 15 15709-SCJ-St101X / 500 (alt.) 09 15 16699-SCJ-ST15 / 500 (alt.)9-SCJ-ST101 / 500 (alt.)
09 15 1572
CR-11 11 06 0006CR-13 13 06 0007CR-20 20 06 0008CR-8 08 06 0005DCB-11 11 07 0002DCB-13 13 07 0003DCB-20 20 07 0004DCB-8 08 07 0001DIC / 100 (alt.)06-PESV14X-CP / 100 (alt.)
11 24 1557
HPL / 100HPG / 100SPL / 1002-CV7-CP / 100
11 25 1139
HT-11 / 25LL-11 / 25ECO-11 /25
11 18 0938
HT-12 / 25LL-12 /25ECO12 /25
12 18 0939
HT-17 / 25LL-17 / 25ECO-17/ 25
17 18 0940
HT-9.5LL-9.5ECO-9.5
09 18 0936
HT-SP / 25LL-SP / 25ECO-SP / 25
07 18 0935
PEL / 100 11 24 1238S-50 / 50 50 13 0147T-10/20 / 1 (alt.)T-28 / 5 (alt.)
24 21 1002
T-105 / 5 (alt.)T-25 / 1 (alt.)T-104 / 5 (alt.)
12 21 1001
T-200 / 5 (alt.)T-15/302 / 1 (alt.)
08 21 1000
T-55 / 5 (alt.) 15 21 1664TTR / 100 (alt.)VAG / VAL / 100WAL / 1002-SVWST-CP / 100
11 24 1143
Cross-References should help you with the translation of competitors’ article numbers to La-Pha-Pack® article numbers. However, this is not always possible 1:1. The indication “(alt.)” behind a cross-reference implies that the appropri-ate La-Pha-Pack® product is an alternative product which – inspite of technical differences to the competitor’s product – is suitable for the application. Our Customer Service department will be more than happy to explain to you the exact differences to the competitor’s product.It may quite be possible that for one competitor’s product several La-Pha-Pack®
products are indicated. In this case the most equivalent product is the one that has no additional remark “(alt.)”.Should the competitor’s packaging unit diverge from the one of La-Pha-Pack®, we indicated the competitor’s packaging unit behind the article number after a “/”. The same is valid, if a competitor has different article numbers for different packaging units of one and the same product.
Not all of the indicated cross-references are included in our catalogue, as we only list the most popular ones there. Nevertheless, these products can be obtained from us. For some products for which we indicated cross-references some purchasing condition may have to be fulfilled, e.g. empty Aluminium caps can only be bought in combination with septa or stoppers, resp. for some septa minimum order quantities might be required. Cross-References for 2in1 KITs have to be asked for separately, if they are not yet listed in here.In case that you do not find a cross-reference, please kindly contact our Cus-tomer Service department.We generally recommend to ask for cost-free samples for testing purposes, as even technically comparable products may differ in their optical appearance.We kindly ask for your understanding that we do not take over any guarantee for the correctness and completeness of the data indicated here.
77
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
CRS La-Pha-Pack® Article-No.
103201 11 09 0486123101 11 09 0356123111 11 25 1057123121 11 25 1053123153 11 09 0619123161 11 19 0933123165 11 19 0932123171 11 19 1022123201 11 09 0184123205 11 09 0210123208 11 09 1241123215 11 09 0259123222 11 09 0476123242 11 09 0500123243 11 24 1049123244 11 24 1050123247 11 24 1052123248 11 09 0519123250 11 24 1143123251 11 09 0415123252 11 24 1238123253 11 09 0520123254 11 24 1528123255 11 09 0417123256 11 24 1342123341 11 09 0627123371 11 09 0644123405 10 09 0743123408 10 09 1196123415 10 32 1612124001 11 09 0831154505 13 09 0222154515 13 09 0280154525 13 28 1069154535 13 28 1074154545 13 28 1071186054 25 16 0351186055 25 16 0350186057 25 16 0346186058 25 16 0347223801 20 09 0342224601 20 09 1405224604 20 09 0795275705 24 09 0589275805 24 09 0927279505 24 09 0402279515 24 09 0928279545 24 14 0976308000 08 06 0005308001 08 03 0451308040 08 07 0001308115 08 08 0027308201 08 03 0165308401 08 03 0113308801 08 03 0268309041 09 15 0982309044 09 15 0869309525 08 15 0427309585 08 15 0294310115 10 08 0742311000 11 06 0006311001 11 03 0209311040 11 07 0002311201 11 03 0362311261 11 15 0635311271 11 15 0637311401 11 03 0196
CRS La-Pha-Pack® Article-No.
312115 13 08 0166312415 13 08 0639312715 13 15 0815313000 13 06 0007313001 13 03 0571313040 13 07 0003320000 20 06 0008320040 20 07 0004320121 20 03 0901320122 20 03 0828320123 20 03 1597320421 20 03 0127320521 20 03 0030324115 24 08 0403324415 24 04 0842123281123284 (alt.)
11 09 0921
053101 / 100 05 09 1674053151 / 100 (alt.) 05 09 0269053159 / 100 05 09 0129053161 / 100 05 09 0968053852 / 200 05 09 0706063011 / 100 06 09 0357063101 / 100 06 09 0866063151 / 100 06 09 0669063161 / 100 06 09 0865063211 / 100 (alt.)063201 / 100
08 09 0276
063251 / 100 08 09 0606063951 / 100 40 09 0146074011 / 125 08 09 0406074061 / 100 08 09 0258083002 / 200 08 09 0284083061 / 100 08 09 1080083542 / 200 08 14 0641084001 / 100 08 09 0845084201 (flat bottom) 06 09 0651084242 / 250 08 14 0513123135 (alt.) 11 23 1098123157 (+ PTFE/Rubber Seal) 11 09 0620123224123211A
11 09 0477
123225 (alt.) 11 23 1046123332 / 200 11 27 1063123332 / 200 (alt.) 11 14 0544123340123315 (alt.)
11 09 0419
123342123215L (alt.)
11 09 0382
123343 (alt.) 11 09 0645123362 / 200 11 27 1064123362 / 200 (alt.) 11 14 0545123385 (alt.) 11 23 1280123409123406 (alt.)
10 09 1197
123415 (alt.) 10 32 1282123425 / 100 (alt.) 11 14 0630154506 alt. 154555
13 09 1335
154507 alt. 154515L
13 09 1336
154541 / 200 15 27 1065154541 / 200 (alt.) 15 14 0548196503 / 200 15 09 1657236115 / 50234115 / 100
11 18 0938
CRS La-Pha-Pack® Article-No.
236125 / 50234125 / 100
12 18 0939
236905 / 50234905 / 100
09 18 0936
237501 (PE) 20 09 0297237504 / 200 20 09 0796237745237750
10 18 0937
271406 / 144 24 09 1089275745 (alt.) 24 14 1513300501 / 100 50 13 0147307001 / 100 08 02 0177308201308231 (alt.)
08 03 0249
308231 (alt.) 08 03 0200308515 / 100308915 / 100 (alt.)
08 02 0009
308515 / 100 (alt.)308565 / 100 (alt.)
08 02 0103
308565 / 100 (alt.) 08 02 0355308715 / 100 08 02 0005309030 / 100 09 02 0445309030 / 100 09 02 0445309040 / 100 09 02 0511309040 / 100 09 02 0511309042309051
09 15 0867
309043309054
09 15 0838
309045309053
09 15 0868
309525 (alt.) 08 15 0293309715 / 100 08 02 0039310001 / 100 11 02 0176310005 / 100 10 02 0646310515 / 100 09 02 0723310515 / 100 (alt.) 09 02 1260310615 / 100 09 02 1261310815 / 100 09 02 1327311201311231 (alt.)
11 03 0247
311231 (alt.) 11 03 0300311251 (alt.)311281 (alt.)
11 08 1676
311715 / 100 12 02 0463312005 / 100 12 02 0168312515 / 100 12 02 0143312565 / 100 (alt.) 12 02 0223320001 / 100 20 01 0408320101 / 100 20 02 0638320101 / 100 (alt.) 320545 / 100
20 02 0141
320121 (alt.) 20 03 0142320122 (alt.) 20 03 0163320123 (alt.) 20 03 0665320123 (alt.) 20 03 0975320301 / 100 20 01 0114320401 / 100 20 02 0122320501 / 100 20 02 0035320605 / 100 20 01 0664320607 / 100 20 01 1531322515 / 100322516 / 100 (alt.)322545 / 100 (alt.)
22 02 1108
868805 (alt.) 24 21 1002868850 (alt.) 12 21 1001
CRS
You will find information about the handling of the Cross-References on page 76.
78
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
Finneran La-Pha-Pack® Article-No.
30108G-1232 / 100 (alt.) 11 14 118930109P-1232 11 19 093230109T-1232 11 19 102130111G-1232 / 100 11 14 119030111G-1232A 11 14 165630111P-1232 11 19 093330111T-1232 11 19 102230308-632 / 200 08 09 027630509P-1232 (alt.) 11 19 120530608-730A / 200 08 09 108030708-740A / 200 08 09 025830808-740 / 200 08 09 040530808-740A / 200 08 09 040630808-830 / 100 08 09 028430808-840 / 100 08 09 0845310020-2346 20 09 0795310020A-2346 20 09 140531108-1232 11 09 041731111-1232 11 09 041531205-1965 15 09 165731509-1232 11 09 062031511-1232 11 09 0619320020-2375 20 09 0796320020A-2375 20 09 0297320020A-2375 20 09 087332008-1232 11 09 021032008-1232A 11 09 025932008M-123232008E-123232008E-12B (alt.)32008E-12G (alt.)32008E-12R (alt.)32008E-12Y (alt.)
11 09 0419
32008M-1232A32008E-1232A32008E-12AB (alt.)32008E-12AG (alt.)32008E-12AR (alt.)32008E-12AY (alt.)
11 09 0382
32009-1232 11 09 050032009-1232A (alt.)32009M-1232A32009E-1232A32009E-12AB (alt.)32009E-12AG (alt.)32009E-12AR (alt.)32009E-12AY (alt.)
11 09 0520
32009M-123232009E-1232 32009E-12B (alt.) 32009E-12G (alt.)32009E-12R (alt.)32009E-12Y (alt.)
11 09 0519
32010-1232 10 09 074332010-1232A (alt.) 32010M-1232A 32010E-1232A 32010E-12AB (alt.) 32010E-12AG (alt.) 32010E-12AR (alt.) 32010E-12AY (alt.)
10 09 1197
32010M-1232 32010E-1232 32010E-12B (alt.) 32010E-12G (alt.) 32010E-12R (alt.) 32010E-12Y (alt.)
10 09 1196
32011-1232 11 09 018432011L-1232 11 09 035632011LM-1232 32011LE-1232 32011LE-12B (alt.) 32011LE-12G (alt.)32011LE-12R (alt.) 32011LE-12Y (alt.)
11 09 0476
32011S-1232 11 09 062732011SM-123232011SE-1232 32011SE-12B (alt.) 32011SE-12G (alt.) 32011SE-12R (alt.) 32011SE-12Y (alt.)
11 09 0644
Finneran La-Pha-Pack® Article-No.
3211LM-1232A3211LE-1232A 3211LE-12AB (alt.)3211LE-12AG (alt.) 3211LE-12AR (alt.)3211LE-12AY (alt.)
11 09 0477
3211SM-1232A 3211SE-1232A 3211SE-12AB (alt.) 3211SE-12AG (alt.)3211SE-12AR (alt.)3211SE-12AY (alt.)
11 09 0645
32511-1240 11 09 083134013-1545 13 09 022234013-1545A 13 09 028034013-1545A34013E-1545A34013E-15AB (alt.)34013E-15AG (alt.)34013E-15AR (alt.)34013E-15AY (alt.)
13 09 1336
34013M-1545 34013E-1545 34013E-15B (alt.) 34013E-15G (alt.) 34013E-15R (alt.) 34013E-15Y (alt.)
13 09 1335
36020-2238 20 09 03424000-530 / 100 05 13 04264000-638 50 13 01474005BS-425 (alt.)401-530 / 100 (alt.)
05 09 0279
401-531 / 100 05 09 0129401-531 / 100 05 09 0269401BS-530 / 100 05 09 0968402-536 (alt.) 05 09 07064025-531 / 100 05 09 16744025-629 / 100 06 09 03574025-629 / 100 06 09 06694025BS-629 / 100 06 09 08654035-630 / 100 06 09 0866403-638X/403-639
40 09 0146
403BS-638X (alt.) 06 09 06514100-1232 11 09 05374100-1232A 11 09 05384100-1545 15 09 05394100-1545A 15 09 05404100-840 08 09 04834100-840A 08 09 04845100-20 20 01 04085100CT-20 20 01 00935100TA-20 20 01 00945110-08 08 03 02685110-11 11 03 03395140-08 08 03 04515140-11 11 03 02095140-11B (alt.) 11 03 03035140-11G (alt.) 11 03 03015140-11R (alt.) 11 03 03025140-11Y (alt.) 11 03 03045140-13 13 03 05715140-20 20 03 00595141PR-20 20 03 02645142PR-20 20 03 01125143PR-20 20 03 01635143PR-20 20 03 08285144TP-20 20 03 11865145TP-20 20 03 09755146AL-20 20 03 03275146TPAL-20 (alt.) 20 03 14575150-08 08 03 02495150-11 11 03 02475150-11B 11 03 06675150-11G 11 03 16255150-11R 11 03 06665150-11Y 11 03 16245150-13 13 03 10175150-20 20 03 01425150-20 20 03 09015160-08 08 03 01135160-11 11 03 0196
Finneran La-Pha-Pack® Article-No.
5160-11B 11 03 03725160-11G 11 03 03705160-11R 11 03 03715160-11Y 11 03 03735170-11 11 03 04645190-08 08 03 00555190-08 08 03 08615190-11 11 03 04075200-085210-08 (alt.)
08 08 1675
5200-115200SB-11 / 5200SB-11R (alt.)5200SB-11B / 5200SB-11G (alt.)5200SB-11Y (alt.)5210-11 / 5210-11R (alt.)5210-11B / 5210-11G (alt.)5210-11Y / 5610-11 (alt.)
11 08 1676
5240-08 09 15 07535240-115240-11PP (alt.)5640-11 (alt.)
11 15 0635
5240-11B 11 15 12675240-11G 11 15 15555240-11R 11 15 13235240-11Y 11 15 15565250-08 09 15 07565250-115250-11PP (alt.)5650-11 (alt.)
11 15 0637
5250-11B 11 15 11515250-11R 11 15 13255260-115260-11PP (alt.)5660-11 (alt.)
11 15 0636
5260-11B 11 15 12685260-11R 11 15 13245260-11Y 11 15 16775275-115270-11 (alt.)
11 15 0650
5290-11 11 15 16025310-08W 08 08 04365310-10 10 08 07425310-13 13 08 01665310-13W 13 08 06395310L-08 08 08 00275320-08 08 08 04205320-13 13 08 03365394-09 09 15 15705394-09B 09 15 08675394-09G 09 15 13565394-09N 09 15 04785394-09R 09 15 11765394-09Y 09 15 15425395-09 09 15 15725395-09B 09 15 08385395-09G 09 15 13325395-09N 09 15 04815395-09R 09 15 11785395-09Y 09 15 15275396-09 09 15 15715396-09B 09 15 08685396-09G 09 15 14855396-09N 09 15 04805396-09R 09 15 11775396-09Y 09 15 14865397-09 09 15 16695397-09B 09 15 08695397-09N 09 15 08525397-09R 09 15 11795400SB-085405SB-08
08 08 0488
5405SB-12 12 08 05465405SB-15 15 08 0547601010-08 08 02 0177601010-09 09 02 0980601010-09 09 02 0980601010-10 10 02 0646601010-13 12 02 0168603090-08 08 02 0774603570-08 08 02 0039604040-08 08 02 0232604040-09 (alt.) 09 02 0445
Finneran La-Pha-Pack® Article-No.
604040-09 (alt.) 09 02 0445604040-10 09 02 1259604050-09 09 02 0510604050-09 09 02 0510604060-08 08 02 0005604060-09 09 02 0511604060-09 09 02 0511604060-13 12 02 0463604550-08 08 02 0103606040-13 (alt.) 12 02 0223606050-10607550-10 (alt.)
09 02 0723
606050-13606050G-13
12 02 0143
606070-08 08 02 1448606070-10604070-10 (alt.)
09 02 1327
606070-13 12 02 0322606550-08606550B-08 (alt.)606550T-08 (alt.)607550-08 (alt.)
08 02 0009
606550GR-11606550Y-11606550LB-11G606550LB-11R
11 18 0938
610040G-20 20 02 0057610050-20 20 02 0141804040-10 10 15 1256804060-08 08 15 0294804060-10804060-10B
10 15 1258
804060-13 13 15 0292806050-10 10 15 0744806050-10 (alt.) 10 15 1257806550-08 08 15 0427806550-13 13 15 08159084060-12 11 23 1048909534-12 (alt.)909534E-12 (alt.)
11 24 1049
909534-12A (alt.) 11 24 1528909535-12 (alt.) 11 24 1050909535-12A (alt.)909535E-12A (alt.)
11 24 1342
909535E-12 (alt.) 11 24 1143909536-12 (alt.) 11 24 1052909536E-12 (alt.) 11 24 14469106050-12 10 32 1612920514L-12 11 25 1053920514L12A 11 25 1097920515L-12 11 25 1055920515L-12A 11 25 1289920516L-12 11 25 10579300-08 08 06 00059300-11 11 06 00069300-13 13 06 00079300-20 20 06 00089320-08 08 07 00019320-11 11 07 00029320-13 13 07 00039320-20 20 07 00049404060-15 13 28 10709404060-15A 13 28 10759406550-15 13 28 10699406550-15A 13 28 10749600-01 (alt.) 9601-15 (alt.)
15 21 1664
9700-08 (alt.) 9700-08B (alt.)
08 21 1000
9700-12 / 5 (alt.) 9700-12B / 5 (alt.)
12 21 1001
9800-1232 11 27 10639800-1232 (alt.) 11 14 05449800-1232A 11 27 10649800-1232A (alt.) 11 14 05459800-1545 15 27 10659800-1545 (alt.) 15 14 05489800-1545A 15 27 10669800-1545A (alt.) 15 14 05629800-840 08 27 16709800-840 (alt.) 08 14 05139800-840A 08 27 16719800-840A (alt.) 08 14 0595
Finneran
You will find information about the handling of the Cross-References on page 76.
79
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
Kimble Kontes La-Pha-Pack® Article-No.
73826E-3 11 15 167760200-1232 11 09 061960250-1232 11 09 062060715-1232 (alt.) 11 14 165560740-1232 (alt.) 11 19 093260740A-1232 / 100 (alt.) 11 14 118960745-1232 11 09 092160750-1232 11 19 093360750A-1232 / 100 11 14 119060751-1232 11 14 165660790T-1232 (alt.) 11 24 105060791T-1232 (alt.) 60793T-1232 (alt.)
11 24 1342
60792T-1232 (alt.) 11 24 114360794T-1232 (alt.) 11 24 105160796T-1232 (alt.) 11 24 123860797T-1232 (alt.) 11 24 157360800-123260800V-1232 / 5000
11 09 0500
60800W-1232 11 09 051960801T-1232 (alt.) 11 24 104960803T-1232 (alt.) 11 24 105260804T-1232 (alt.) 11 24 144660805W-1232 60805-1232 (alt.)
11 09 0520
60806T-1232 (alt.)60807T-1232 (alt.)
11 24 1528
60810-123260810V-1232 / 5000
11 09 0210
60810-1545 13 09 022260810-1738 15 09 078860810A-1232 60812A-1232
11 19 1205
60810W-1232 11 09 041960810W-1545 13 09 133560812-1232 10 09 074360812W-1232 10 09 119660815-1232 60815V-1232 / 5000
11 09 0259
60815-1545 13 09 028060815A-1232 (alt.) 10 09 119760815W-1232 11 09 038260815W-1545 13 09 133660820-1232 11 09 018460820-1240 11 09 083160820-740 / 200 / 2000 08 09 040560820-830 / 200 / 2000 08 09 028460820A-740 / 200 / 1000 08 09 030560821G-123260821V-1232 / 1000
11 09 0356
60821W-1232 11 09 047660822T-1232 60822V-1232 / 5000
11 09 0627
60822W-1232 11 09 064460825-740 / 200 / 2000 08 09 040660825A-730 / 125 08 09 108060825A-740 / 200 / 1000 08 09 025860825P-1232 60825A-1232 (alt.) 60825V-1232 / 1000 (alt.)
11 09 0477
60826W-123260826T-1232 (alt.)
11 09 0645
60827-2238 (alt.) 60827T-2238 (alt.)
20 09 0342
60827-2346 60827T-2346 (alt.)
20 09 0795
60827-2375 60827T-2375 (alt.)
20 09 0796
60827A-2346 (alt.) 20 09 140560827A-2375 20 09 087360827A-2375 (alt.) 20 09 029760828-1544 15 14 054860829-1544 15 14 0562
Kimble Kontes La-Pha-Pack® Article-No.
60830-531 05 09 167460830-631 06 09 086660831-1231 11 09 053760832-840 60832B-840 / 3000
08 09 0483
60832A-840 08 14 051360832A-840 08 27 167060833-840 08 09 048460833A-840 08 14 059560833A-840 08 27 167160834B-835 / 5000 08 09 062160834D-835 08 14 064160835-1231 11 09 053860836-1232 11 09 041760837-632 / 200 / 2000 08 09 027660837A-1232 11 09 041560837B-632 / 200 / 1000 08 09 060660837H-1032 11 09 048660840-631 06 09 035760840-631 06 09 066960840T-531 05 09 012960840T-531 05 09 026960840T-639 60840X-639
40 09 0146
60842A-2 50 13 014760843-529 / 100 05 09 096860843-629 / 100 06 09 086560850T-1232 11 23 104660851T-1232 (alt.) 11 25 105360851T-1232 (alt.) 11 25 105460852T-1232 (alt.) 11 25 109760852T-1232 (alt.) 11 25 128760853T-1232 (alt.) 11 25 105760857T-1232 (alt.) 11 26 105960858T-1232 (alt.) 11 26 144460859T-1232 11 26 106260871T-1232 (alt.) 11 25 105560871T-1232 (alt.) 11 25 105660872T-1232 11 26 106060873T-1232 11 26 106160877T-1232 11 23 108560881C-1545 / 20060881T-1545 / 200 (alt.)
13 28 1069
60885T-1232 11 26 127460886-1232 (alt.) 60886C-1232 (alt.)
10 32 1282
60886-1232 (alt.)60886C-1232 (alt.)
10 32 1612
60887C-1232 10 32 132960890T-1545 / 200 13 28 107160896-1232 (alt.) 10 32 128360910-3 15 09 165760942A-40 / 72 (alt.) 60961C-912 / 72 / 432
24 14 0976
60958A-16 (alt.) / 144 / 432 24 09 108960958A-4 / 144 / 432 24 09 058960958A-6 / 144 / 432 24 09 083960958A-912 / 144 / 432 24 09 040260960A-16 (alt.) / 144 / 432 24 09 109060960A-4 / 144 / 432 24 09 092760960A-6 / 144 / 432 24 09 092360960A-912 / 144 / 432 24 09 092860961C-4 / 72 / 432 24 14 151360961C-912 / 72 / 432 (alt.) 24 14 162160962C-912 / 72 / 432 (alt.) 24 14 109469901-11 11 06 000669901-13 13 06 000769901-20 20 06 000869901-8 08 06 000569903-11 11 07 000269903-13 13 07 000369903-20 20 07 000469903-8 08 07 0001
Kimble Kontes La-Pha-Pack® Article-No.
73655-12 (alt.) 12 21 100173791A-9425 09 15 157073791B-9425 09 15 135673791C-9425 09 15 117673791D-9425 09 15 154273792A-9425 09 15 157173792B-9425 09 15 148573792C-9425 09 15 117773792D-9425 09 15 148673793A-9425 09 15 157273793B-9425 09 15 133273793C-9425 09 15 117873793D-9425 09 15 152773794A-9425 (alt.) 73794B-9425 (alt.)
09 15 0869
73794C-9425 09 15 117973794D-9425 (alt.) 09 15 085273804A-10425 / 100 (alt.) 10 15 074473804A-10425 / 100 (alt.) 10 15 125773804A-13425 13 15 081573804A-8425 / 100 08 15 042773804C-10425 / 100 (alt.) 10 15 132873804C-8425 08 15 144973806A-10425 10 08 074273806A-13425 13 08 016673806A-24400 24 08 040373806A-8425 08 08 002773806B-13425 (alt.) 73806C-13425 (alt.) 73806D-13425 (alt.) 73806E-13425 (alt.)
13 08 0639
73806E-8425 (alt.) 08 08 043673808-24400 24 04 084173809A-8 (alt.) 09 02 044573809A-8 (alt.) 09 02 044573809B-8 09 02 051173809B-8 09 02 051173809C-8 09 02 051073809C-8 09 02 051073812-10 09 02 126173812-13 12 02 046373812-8 08 02 000573813A-11 11 03 040773813A-11 11 03 072073813T-11 (alt.) 11 03 164173813T-8 (alt.) 08 03 045173813T-8 (alt.) 73823T-8 (alt.)
08 03 0200
73814T-11 11 03 019673814T-8 08 03 011373816-18 / 144 16 02 065373816T-13 (alt.) 12 02 022373816T-8 (alt.) 08 02 035573818-18 / 144 (alt.) 16 02 087073818-24 / 144 (alt.) 22 02 101373818A-10 (alt.) 09 02 072373818A-24 22 02 110873818B-8 08 02 000973818H-10 09 02 132773818H-13 12 02 032273818H-8 08 02 003973818H-8 (alt.) 08 02 144873818T-13 (alt.) 73818B-13
12 02 0143
73818T-8 73818B-8 (alt.)
08 02 0103
73818X-18 / 144 (alt.) 16 02 082973819-10 10 02 064673819B-11 11 03 033973819B-8 08 03 026873819T-13 12 02 016873819T-8 08 02 017773820-20 20 01 0093
Kimble Kontes La-Pha-Pack® Article-No.
73821-20 20 01 009473822A-20 20 01 040873822B-20 20 01 011873822C-20 20 01 011673822D-20 20 01 011773823-20 / 144 (alt.) 20 03 113773823-23 / 144 (alt.) 13 03 057173823A-20 20 02 012273824-13 / 144 13 03 101773824S-8 08 03 115673824T-11 11 03 024773824T-11 11 03 036273824T-20 20 03 014273824T-20 20 03 090173824T-20 20 03 148973824T-8 08 03 016573824T-8 08 03 024973824T-8 08 03 059973825-11 (alt.) 11 03 030073825B-11 (alt.) 11 03 030273825C-11 (alt.) 11 03 030373825D-11 (alt.) 11 03 030173825E-11 (alt.) 11 03 030473826-8 11 15 065073826B-2 11 15 132573826B-3 11 15 132473826B-4 (alt.) 11 15 132373826B-8 11 15 132673826C-2 11 15 115173826C-3 11 15 126873826C-4 (alt.) 11 15 126773826C-8 11 15 126973826D-4 (alt.) 11 15 155573826E-4 (alt.) 11 15 155673826T-2 11 15 063773826T-3 11 15 063673826T-4 (alt.) 11 15 063573827-21 20 10 029073830A-20 20 02 005773831A-20 20 02 014173831A-20 20 02 063873831A-20 20 02 148873832-20 20 03 003073832A-20 20 02 003573832C-20 20 03 071073832P-20 20 03 026473833C-20 20 03 066573833P-20 20 03 016373833P-20 20 03 082873833P-20 20 03 149073834A-20 20 03 032673834B-20 20 02 033573834C-20 20 03 069873834P-20 20 03 011273834T-20 20 03 005973835-11 11 03 020973835-12 12 08 054673836-8 08 08 048873838-2 08 08 060573840-11 73826-7 73829T-1 (alt.) 73826T-1 (alt.) 73826B-1 (alt.)73826C-1 (alt.) 73826D-1 (alt.) 73826E-1 (alt.)
11 08 1676
73840-8 08 08 1675Z60800-1232 11 09 1241Z60805W-1232 11 09 1242Z60830-631 (alt.) 06 09 1240Z60843-629 / 100 06 09 1343
Kimble Kontes
You will find information about the handling of the Cross-References on page 76.
80
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
National Scientific La-Pha-Pack® Article-No.
B7807-18 18 08 0516B7920-VO 24 09 0589B7921-VO 24 09 0927B7950-1A 24 08 0403B7950-26 22 02 1108B7950-VO 24 09 0402B7951-VO 24 09 0928B7999-12 15 09 1657C4000-1 11 09 0500C4000-1W 11 09 0519C4000-2W 11 09 0520C4000-30 (alt.) 09 02 0445C4000-30 (alt.) 09 02 0445C4000-40 09 02 0511C4000-40 09 02 0511C4000-51A 09 15 1570C4000-51B 09 15 0867C4000-51G 09 15 1356C4000-51R 09 15 1176C4000-51Y 09 15 1542C4000-53A 09 15 1571C4000-53B 09 15 0868C4000-53G 09 15 1485C4000-53R 09 15 1177C4000-53Y 09 15 1486C4000-54A 09 15 1572C4000-54B 09 15 0838C4000-54G 09 15 1332C4000-54R 09 15 1178C4000-54Y 09 15 1527C4000-55 09 02 0843C4000-55 09 02 0843C4000-55A 09 15 1669C4000-55B 09 15 0869C4000-55R 09 15 1179C4000-60 09 02 0510C4000-60 09 02 0510C4000-64A C4000-64B (alt.)
09 04 1220
C4000-64B (alt.) 09 04 1533C4000-80 11 24 1049C4000-82W 11 24 1528C4000-86 11 24 1052C4000-86W 11 24 1446C4000-9 11 09 0620C4000-92 11 24 1050C4000-92W 11 24 1143C4000-94W 11 24 1342C4000-95 11 24 1051C4000-95W 11 24 1238C4000-96W 11 24 1573C4000-LV1 11 09 0999C4000-LV2 (alt.) 11 14 1655C4000-S1 (alt.)C4000-S1W
11 09 1241
National Scientific La-Pha-Pack® Article-No.
C4000-S2W 11 09 1242C4008-1 08 09 0284C4008-10 08 08 1675C4008-100 08 06 0005C4008-102 08 07 0001C4008-1A 08 03 0451C4008-2A 08 03 0113C4008-4A 08 03 0249C4008-50 08 14 0641C4008-50C 08 08 0605C4008-632C 08 09 0606C4008-632R 08 09 0276C4008-730 08 09 1080C4008-739 08 09 0305C4008-740 08 09 0258C4008-741 08 09 0405C4008-742 08 09 0406C4010-1 10 09 0743C4010-10 10 02 0646C4010-1W 10 09 1196C4010-2W 10 09 1197C4010-30 (alt.) 09 02 1259C4010-30A (alt.) 10 15 1256C4010-35 (alt.) 09 02 0723C4010-35 C4010-60
09 02 1260
C4010-35BLK C4010-60BLK
10 15 1257
C4010-40 09 02 1261C4010-40A (alt.) 10 15 1258C4010-55 C4010-65 (alt.)
09 02 1327
C4010-55BLK 10 15 1328C4010-60BLK (alt.) 10 15 0744C4010-627L 06 09 0669C4010-629L (alt.) 06 09 0357C4010-630 06 09 0865C4010-88 (alt.) 10 32 1282C4010-88AW (alt.) 10 32 1283C4010-92 (alt.) 10 32 1329C4010-98BLK 10 08 0742C4010-S629 (alt.) 06 09 1240C4010-S630 06 09 1343C4011-1 11 09 0356C4011-11 11 19 0933C4011-1AP (100) C4011-1A (1000)
11 03 0209
C4011-1W 11 09 0476C4011-2A 11 03 0196C4011-2W 11 09 0477C4011-3A (alt.) 11 03 0339C4011-4A 11 03 0247C4011-5 11 09 0627
National Scientific La-Pha-Pack® Article-No.
C4011-50 (alt.)C4011-50B C4011-50G (alt.) C4011-50R (alt.) C4011-50Y (alt.) C4011-52 (alt.) C4011-52B (alt.) C4011-52G (alt.) C4011-52R (alt.) C4011-52Y (alt.)
11 08 1676
C4011-51 (alt.) 11 15 0635C4011-51B (alt.) 11 15 1267C4011-51G (alt.) 11 15 1555C4011-51R (alt.) 11 15 1323C4011-51Y (alt.) 11 15 1556C4011-53 11 15 0636C4011-53B 11 15 1268C4011-53R 11 15 1324C4011-53Y 11 15 1677C4011-54 11 15 0637C4011-54B 11 15 1151C4011-54R 11 15 1325C4011-55 11 15 0650C4011-55B 11 15 1269C4011-55R 11 15 1326C4011-56 11 15 1602C4011-5A 11 03 0407C4011-5A 11 03 0720C4011-5W 11 09 0644C4011-631 06 09 0866C4011-6W 11 09 0645C4011-72 11 26 1059C4011-72AW 11 26 1444C4011-73 11 26 1060C4011-73AW 11 26 1274C4011-74 11 26 1061C4011-79 11 14 0545C4011-79VO 11 09 0538C4011-80 11 14 0544C4011-80VO 11 09 0537C4011-81 12 08 0546C4011-87 11 25 1053C4011-87AW 11 25 1097C4011-87W 11 25 1139C4011-9 11 09 0619C4011-92C4011-92W(alt.)
11 25 1055
C4011-92AW 11 25 1289C4011-94 C4011-94W (alt.)
11 25 1057
C4011-98B 11 03 0303C4011-98G 11 03 0301C4011-98R 11 03 0302C4011-98Y 11 03 0304C4011-LV2 (alt.) 11 14 1656
National Scientific La-Pha-Pack® Article-No.
C4012-1 11 09 0184C4012-10 (without label)
11 09 0921
C4012-100 11 06 0006C4012-102 11 07 0002C4012-15 C4011-LV1 (alt.)
11 14 1190
C4012-25 (alt.) 12 21 1001C4012-465 05 09 1674C4012-529L 05 09 0269C4012-530 05 09 0968C4012-531L (alt.) 05 09 0129C4013-1 11 09 0210C4013-10 08 02 0177C4013-100 13 06 0007C4013-100F 13 06 0069C4013-102 13 07 0003C4013-15 11 23 1046C4013-16 11 23 1048C4013-17 11 23 1098C4013-1A 08 08 0027C4013-2 11 09 0259C4013-30 08 02 0355C4013-32 08 02 0039C4013-40 08 02 0005C4013-40A 08 15 0294C4013-60 08 02 0103C4013-60A 08 15 0293C4015-1 13 09 0222C4015-10 12 02 0168C4015-11W 13 09 1335C4015-1A B7807-13
13 08 0166
C4015-1W 13 08 0639C4015-2 13 09 0280C4015-25 15 21 1664C4015-2W 13 09 1336C4015-30 12 02 0223C4015-30A 13 15 0456C4015-40 12 02 0463C4015-40A 13 15 0292C4015-45W (alt.) 13 15 1498C4015-48 15 14 0548C4015-48VO 15 09 0539C4015-49 15 14 0562C4015-49VO 15 09 0540C4015-50 15 08 0547C4015-536 (needs spring)
05 09 0706
C4015-55 12 02 0322C4015-55W 13 15 1293C4015-640 50 13 0147C4015-643 40 09 0146C4015-75 12 02 0143C4015-75A 13 15 0815
National Scientific La-Pha-Pack® Article-No.
C4015-88 13 28 1069C4015-88A 13 28 1074C4015-90 13 28 1071C4015-90AW (vial with label)
13 28 1076
C4015-96 08 14 0513C4015-96VO 08 09 0483C4015-97 08 08 0488C4015-99 08 14 0595C4015-99VO 08 09 0484C4020-10 (HS crimp neck)
20 09 0795
C4020-100 20 06 0008C4020-100F 20 06 0043C4020-102 20 07 0004C4020-2 20 09 0297C4020-20 (HS crimp neck)
20 09 0796
C4020-210 20 09 1405C4020-30 20 10 0290C4020-32 (white Silicone/ natural PTFE)
20 02 0141
C4020-32A 20 03 0901C4020-32A (alt.) 20 03 0142C4020-32AP (alt.) 20 03 0163C4020-34 (red rubber)
20 02 0057
C4020-34A (red rubber)
20 03 0059
C4020-34AP (red rubber)
20 03 0112
C4020-36 20 02 0035C4020-36A 20 03 0030C4020-36AP 20 03 0264C4020-3A 20 01 0408C4020-5A 20 01 0093C4020-6A 20 01 0114C4028-100 28 06 0320C4028-102 28 07 0092C4030-32AP 20 03 0828C4032-100 32 06 0135C4032-102 32 07 0078F2500-1 25 16 0351F2500-19 (alt.) 25 16 1587F2500-2 25 16 0350F2500-3 25 16 0347F2500-4 25 16 0346F2500-5 25 16 1553F2500-6 25 16 1552F2500-7 25 16 0349F2500-8 25 16 1548F2502-1 25 16 1551F2502-2 25 16 1550F2502-3 25 16 1547
National Scientific
SUN / SRI International
La-Pha-Pack® Article-No.
200 000 / 100 (alt.)200 001 / 2000 (alt.)
11 09 0184
200 022 11 09 0538200 024 11 14 0545200 034 / 100 08 09 0276200 104 / 100200 100 / 1000
11 03 0209
200 104 / 100 (alt.) 200 100 / 1000 (alt.)
11 03 0300
200 122 / 100 (alt.) 200 118 / 1000 (alt.)
11 03 0303
200 128 / 100 (alt.) 200 124 / 1000 (alt.)
11 03 0301
200 134 / 100 (alt.) 200 130 / 1000 (alt.)
11 03 0302
200 140 / 100 (alt.) 200 136 / 1000 (alt.)
11 03 0304
200 152 / 100200 148 / 1000
11 03 0196
200 204 / 1000 501 319 / 100 (alt.) 501 320 / 100 (alt.) 501 387 / 1000 (alt.)
11 08 1676
SUN / SRI International
La-Pha-Pack® Article-No.
200 228 / 1000200 232 / 500
05 09 1674
200 238 05 09 0129200 246 11 06 0006200 250 / 100 11 09 0419200 252 / 100 11 09 0382200 292 / 100 200 288 / 1000
08 08 0027
200 299 / 1000 08 08 0436200 330 (alt.) 08 15 0654200 348 / 100 (alt.) 200 344 / 1000 (alt.)
08 02 0103
200 348 / 100 (alt.) 200 344 / 1000 (alt.) 200 336 / 100 200 332 / 1000
08 02 0009
200 368 / 1000 08 02 0177200 384 / 100200 380 / 1000
08 02 0005
200 402 (alt.) 11 23 1100200 404 (alt.) 11 23 1280200 408 (alt.) 11 14 0630200 422 (alt.) 11 23 1085
SUN / SRI International
La-Pha-Pack® Article-No.
200 488 13 06 0007200 492 / 100 13 09 1335200 494 / 100 13 09 1336200 498 15 14 0548200 568 / 200 (alt.) 200 564 / 1000 (alt.)
13 15 0439
200 600 / 1000 200 590 / 1000 (alt.) 200 594 / 100 ( alt.)
12 02 0143
200 606 / 100 200 596 / 100 (alt.)
13 15 0815
200 608 / 1000 12 02 0168200 618 / 1000 (alt.) 500 864 / 100 (alt.)
12 02 0224
200 668 / 100 200 670 / 1000
06 09 0866
200 774 / 100 40 09 0146200 778 / 100 50 13 0147200 898 / 100 20 09 0796200 900 / 100 24 09 0402200 902 / 100 24 09 0928200 911 / 100 (alt.) 24 14 1094200 913 / 100 24 14 0976
SUN / SRI International
La-Pha-Pack® Article-No.
200 932 / 1000 20 10 0290200 952 / 100 200 953 / 1000 502 158 / 250
20 02 0638
200 962 / 100 20 02 0141200 972 20 06 0008201 611 / 1000 10 02 0646201 800 / 200 08 09 0284201 828 (alt.) 08 03 0200201 828 / 1000 08 03 0451201 876 / 1000 08 03 0113201 892 08 06 0005201 916 / 1000 08 14 0641203 501 / 200 15 09 1657203 503 / 100 24 09 0589312 050 24 08 0403400 915 / 100 20 03 0264405 032 / 100 20 09 0342405 034 / 100 20 09 1405405 038 / 1000 20 01 0973405 048 / 100 405 044 / 1000
20 02 0057
405 054 / 100 20 03 0059
SUN / SRI International
La-Pha-Pack® Article-No.
405 062 / 100 20 03 0030405 063 / 1000 20 02 003541225-GM / 100 25 16 158742225-NN / 10042225-NB / 10000
25 16 1550
42225-NP / 100 42225-PB / 10000
25 16 1546
42225-PV / 100 42225-PVB / 10000
25 16 1552
44525-NN / 100 44525-NB / 10000
25 16 1551
44525-NP / 100 44525-PB / 10000
25 16 1547
44525-PV / 100 44525-PVB / 10000
25 16 1553
44526-NN / 100 44526-NB / 10000
25 16 0351
500 002 11 09 0537500 060 12 08 0546500 061 / 100 08 15 1449500 062 (alt.) 08 15 0293500 062 / 100 08 15 0427500 063 / 100 10 15 1328
SUN / SRI International (Continuation see page 81)
You will find information about the handling of the Cross-References on page 76.
81
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Cros
s-Re
fere
nce-
Char
ts
SUN / SRI International (Continuation)
SUN / SRI International
La-Pha-Pack® Article-No.
500 066 / 100 08 15 0294500 067 / 100 10 15 0744500 072 11 14 0544500 073 (alt.) 08 15 0441500 073 / 100 08 15 1024500 092 11 09 0619500 106 / 100 500 102 / 1000
11 19 0933
500 132 / 100 08 09 0606500 135 / 100 08 09 1080500 141 (96 Position) 08 21 1000500 142 alt. 501 367 alt.
12 21 1001
500 144 15 21 1664500 178 / 100 500 180 / 1000
22 02 1108
500 188 / 100 (alt.) 05 09 0706500 196 11 09 0415500 212 (alt.) 200 052 / 100
11 14 1190
500 224 / 1000 501 224 / 1000 (alt.)
08 08 1675
500 272 20 03 0142500 300 / 100 500 301 / 2000 200 000 / 100 (alt.)
11 09 0476
500 302 / 100 11 09 0477500 304 (alt.) 06 09 0357500 304 (alt.) 06 09 0669500 306 / 100 10 09 1196500 309 / 100 500 307 / 1000
10 08 0742
SUN / SRI International
La-Pha-Pack® Article-No.
500 322 / 100 10 09 1197500 334 / 1000 20 01 0408500 336 / 1000 20 01 0114500 352 / 100 500 350 / 1000
13 15 0996
500 440 08 07 0001500 442 11 07 0002500 444 13 07 0003500 446 20 07 0004500 488 / 100 20 09 0795500 550 / 100 20 09 0873500 572 / 1000 13 08 0166500 578 / 1000 13 08 0639500 584 11 25 1053500 584 11 25 1054500 586 11 25 1097500 602 / 250 500 634 / 2000
08 14 0513
500 604 / 250 500 636 / 2000
08 14 0595
500 726 (alt.) 501 380 (alt.)
11 26 1060
500 778 / 100 11 09 0519500 779 / 100 11 09 0520500 784 / 100 500 822 / 1000
09 02 0510
500 784 / 100 500 822 / 1000
09 02 0510
500 786 / 100 500 824 / 1000
09 02 0511
500 786 / 100 500 824 / 1000
09 02 0511
SUN / SRI International
La-Pha-Pack® Article-No.
500 790 / 100 09 15 1527500 792 / 100 09 15 1486500 798 (alt.) 11 24 1446500 854 502 011
11 09 0921
500 864 / 1000 12 02 0322500 866 / 1000 13 15 1293500 870 / 100 500 868 / 1000
08 02 0039
500 874 / 100 500 872 / 1000
09 02 1327
500 892 / 100 09 15 1485500 894 / 100 500 890 / 1000
09 02 0723
500 900 06 09 0865500 918 05 09 0968501 224 08 03 1156501 300 / 100 11 09 0644501 302 / 100 11 09 0645501 305 / 100 (alt.) 06 09 1240501 311 / 100 501 310 / 1000 200 158 / 100 200 154 / 1000
11 03 0247
501 312 / 100 (alt.) 501 381 / 1000 (alt.)
11 15 1323
501 313 / 100 (alt.) 501 382 / 1000 (alt.)
11 15 1325
501 315 / 100 (alt.) 501 386 / 1000 (alt.)
11 15 1268
SUN / SRI International
La-Pha-Pack® Article-No.
501 316 501 314 / 100 (alt.) 501 383 / 1000 (alt.)
11 15 1151
501 317 / 100 (alt.) 501 384 / 1000 (alt.)
11 15 1269
501 317 / 100 (alt.) 501 384 / 1000 (alt.)
11 15 1326
501 318 / 100 (alt.) 501 385 / 1000 (alt.)
11 15 1324
501 326 (alt.) 11 26 1062501 327 (alt.) 11 26 1059501 329 (alt.) 11 26 1444501 335 / 100 (alt.) 11 09 1241501 340 / 100502 009
11 09 0999
501 342 / 100 11 09 0620501 344 / 100 09 15 1669501 345 / 100 09 15 1177501 346 / 100 09 15 1571501 347 / 100 09 15 1542501 348 / 100 09 15 1356501 349 / 100 09 15 1176501 350 / 100 09 15 1570501 351 / 100 09 15 0867501 377 / 100 09 15 0868501 790 / 100 09 15 1332502 023 / 500 08 09 0305502 024 / 500 08 09 0258502 044 / 500 11 09 0417502 052 / 500 11 03 0885502 052 / 500 (alt.) 11 03 0588502 070 11 03 0339
SUN / SRI International
La-Pha-Pack® Article-No.
502 147 / 500 (alt.) 20 02 0335502 156 20 02 0591502 182 / 500 08 03 0884502 182 / 500 (alt.) 08 03 0599502 184 / 500502 180 / 500 (alt.)
08 03 0249
502 192 / 1000 08 03 0268502 218 / 500 08 02 0881502 218 / 500 (alt.) 08 02 0563502 289 / 25502 295 / 25
11 18 0938
502 290 / 25 12 18 0939502 291 / 25 17 18 0940502 293 / 25502 298 / 25
09 18 0936
502 294 / 25502 299 / 25
07 18 0935
502 326 / 500502 025
08 09 0405
502 327 / 500 08 09 0406502 370 / 500 (alt.) 20 01 1531502 418 / 500 11 03 0667502 790 / 100 09 15 1178502 796 (alt.)509 796 (alt.)
11 24 1342
503 790 / 100 09 15 1572504 790 09 15 0838506 796 (alt.) 11 24 114352225-RC 25 16 154854525-RC / 10054525-RCC / 500
25 16 1549
600 017 / 100 (alt.) 11 14 1655
Wheaton La-Pha-Pack® Article-No.
223681 08 09 0284223682 11 09 0184224167 12 02 1635224168 20 02 0035224173 20 02 0141224300 08 06 0005224301 11 06 0006224302 13 06 0007224303 20 06 0008224350 08 07 0001224351 11 07 0002224352 13 07 0003224353 20 07 0004224580 08 02 0103224600 08 09 0276224604 08 09 0405224605 08 09 0406224607 08 09 0258224705 15 09 1657224795 13 09 0280224831 24 09 0589224832 24 09 0839224833 24 09 0402224836 24 09 0928225120 11 09 0537225121 11 09 0538225126 15 09 0539225127 15 09 0540225170 11 23 1046225174 11 09 0476225175 11 09 0356225179 11 09 0627225180 11 19 0933225190 11 14 1190225245 08 09 0484225260 05 09 0968225265 06 09 0865225277 20 09 0342225280 20 09 0297225326 11 09 0999240583 12 02 0224240602 08 15 0293242761 10 15 1258242762 10 15 0744
Wheaton La-Pha-Pack® Article-No.
242762 10 15 1257242763 10 08 0742242768 13 15 0815242772 11 15 0636242775 11 15 0650242776 11 15 0637242786 11 15 0635242787 11 15 1602242800 08 08 0488242810 12 08 0546242815 15 08 0547868804 15 21 1664985688 20 09 0796985800 12 21 1001224100-181 20 10 0290224178-01 20 01 0408224183-01 20 01 0093224209-01 (1.3mm thick)
08 03 0451
224211-01 11 03 0209224211-05 (alt.) 11 03 0303224211-06 (alt.) 11 03 0302224211-07 (alt.) 11 03 0301224218-01 08 03 0249224219-01 11 03 0247224219-05 11 03 0667224219-06 11 03 0666224219-07 11 03 1625224222-01 13 03 0571224231-01 11 03 0196224231-05 11 03 0372224231-06 11 03 0371224231-07 11 03 0370224235-01 (1.0mm thick)
11 03 1641
224609 / 500 08 09 1080224626 (alt.) 10 09 0743224627 (alt.) 10 09 1196224628 (alt.) 224629 (alt.)
10 09 1197
224794224702
13 09 0222
224794-01 13 09 1335224795-01 13 09 1336
Wheaton La-Pha-Pack® Article-No.
225173225172 (alt.)
11 09 0477
225179-01 11 09 0644225179-03 225179-02 (alt.)
11 09 0645
225200 225221-01 (alt.)
11 14 1656
225220-01 11 09 0921225246 (alt.) 08 14 0595225246 / 1000 08 27 1671225256 (with spring) 05 09 0706225268 (with plastic bottom spring)
40 09 0146
225278 (alt.) 20 09 1405225328 (alt.) 11 14 1655225350-531 05 09 1674225350-631 06 09 0866240251-01240251 (PP/Sil./Teflon liner)
24 04 0841
240506 (phenolic) 08 08 0027240508 (phenolic) 13 08 0166242760 (alt.) 10 15 1256242772-01 11 15 1268242772-04 11 15 1324242772-05 11 15 1677242775-01 11 15 1269242775-04 11 15 1326242776-01 11 15 1151242776-04 11 15 1325242782 (alt.)242782-01 (alt.)242782-02 (alt.)242782-04 (alt.)242782-05 (alt.)W242900 (alt.)W242902 (alt.)W242904 (alt.)W242906 (alt.)W242908 (alt.)
11 08 1676
242786-01 11 15 1267242786-02 11 15 1555242786-04 11 15 1323242786-05 11 15 1556
Wheaton La-Pha-Pack® Article-No.
868805 (36 vials) 24 21 1002985750 (96 vials) 08 21 1000W224215 20 03 0163W224215 20 03 0828W224216 20 03 0264W224217 20 03 0326W224620-01 11 26 1059W224620-0104 11 26 1563W224620-02 11 26 1060W224620-0204 11 26 1562W224620-03 11 26 1062W224620-0304 11 26 1564W224623-01W224622-01 (alt.)
11 26 1444
W224623-02W224622-02 (alt.)
11 26 1274
W224623-03W224622-03 (alt.)
11 26 1613
W2251153-02W225152-02 (alt.)W225157-04W225156-04 (alt.)
11 24 1091
W225122 11 27 1063W225123 11 27 1064W225149 11 09 0620W225150 11 09 0500W225150-01 11 24 1140W225150-0103 11 24 1605W225150-0104 11 24 1049W225150-02W225154-04
11 24 1141
W225150-0203 11 24 1436W225150-0204 11 24 1050W225151 11 09 0519W225151-0204 11 24 1143W225151-08 11 24 1341W225153W225152 (alt.)
11 09 0520
W225153-0103W225152-0103 (alt.)
11 24 1606
W225153-0104W225152-0104 (alt.)
11 24 1528
W225153-0203W225152-0203 (alt.)
11 24 1609
Wheaton La-Pha-Pack® Article-No.
W225153-0204 W225152-0204 (alt.)
11 24 1342
W225171 11 09 0619W225173-01W225172-01 (alt.)
11 25 1097
W225173-02W225172-02 (alt.)
11 25 1289
W225174-01 11 25 1139W225175-01 11 25 1053W225175-0103 (alt.) 11 25 1508W225175-02 11 25 1055W225175-03 11 25 1057W225181 11 19 0932W225183 11 19 1021W225184 11 19 1022W225243 08 09 0483W225244 (alt.) 08 14 0513W225244 / 1000 08 27 1670W225331-01 09 15 0478W225331-0101 09 15 1570W225331-0103 09 15 1176W225331-0104 09 15 0867W225331-0105 09 15 1542W225331-0107 09 15 1356W225331-0207 09 15 1332W225332-02W225334-04
09 15 0481
W225332-0201W225334-0401
09 15 1572
W225332-0203 09 15 1178W225332-0204 09 15 0838W225332-0205 09 15 1527W225333-03 09 15 0480W225333-0301 09 15 1571W225336-06 09 15 0981W225336-0601 09 15 1668W225338-08 09 15 0852W225338-0801 09 15 1669W225900224700
11 09 0210
W225910 11 09 0259W240565 08 08 1675W240567 09 15 0753W240568 09 15 0756
Wheaton
You will find information about the handling of the Cross-References on page 76.
82
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
On our 6 pages pull-out sheet you will find
on pages 83-86 actual size drawings of all
standard glass articles and on pages 87-88
drawings of all cap types.
All drawings of the glass articles are marked with our
article number and the chapter where you can find
the respective product.
The drawings of the caps are not actual size.
They should only visualize the special
features of certain types of caps.
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
08 09 0875(MT-Plate)
13
08 09 0888(DW-Block)
13
08 09 0909(SQW-Block)
13
08 09 0903 (MTRS)
13
08 09 1081 (SQW/SealmatTM)
13
08 14 0641
9
08 14 051308 14 1168
9
08 14 059508 14 1169
9
05 09 0706
9
08 09 02761
08 09 06061
08 09 02841
08 09 08451
08 09 09531
08 09 04051
08 09 04061
08 09 03051
08 09 02581
08 09 10801
06 09 035706 09 12403, 4, 5, 6, 9
06 09 0669
3, 4, 5, 6, 9
06 09 086506 09 13433, 4, 5, 6
06 09 0866
3, 4, 5, 6, 9
05 09 0129
2
05 09 0269
2
05 09 1674
2
05 09 0279
2
05 09 0968
2
13 09 02228, 19
13 09 02808, 19
13 09 13358
13 09 13368
40 09 01468
15 14 05489
15 14 05629
06 09 06519
20 09 0796
10
20 09 087320 09 1690
10
20 09 1222
10
18 09 0864
10
18 09 130618 09 1310
10
18 09 130718 09 1311
10
40 09 067820
18 09 090611
18 09 090711
20 09 078411
22 09 090811
20 09 0342
10
20 09 0801
10
20 09 140520 09 1691
10
20 09 0802
10
20 09 0795
10
20 09 029720 09 1223
10
20 09 0440
10
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
83
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
84 85
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
EPA-Vials ND24 Headspace ND20
Headspace ND20 Headspace ND18
Micro-Inserts for wide opening Micro-Inserts for small opening
Screw Neck ND13 Shell Vials, 4ml (Insert)
Crimp Neck ND8
Inserts for 96 Position Block Systems (RITTER) Shell Vials, 1ml (Insert)Snap Cap Vials
20 09 034310
15 09 170319
15 09 165719
18 09 170419
20 09 170519
24 09 058924 09 0927
12, 19
24 09 083924 09 0923
12, 19
24 09 040224 09 0928
12, 19
24 09 108924 09 1090
12, 19
20 09 0289
10
Crimp Neck ND20
31 x
6m
m
31 x
6m
m
29 x
5.7
mm
31 x
5m
m
31 x
5m
m
27.5
x 4
mm
29 x
5m
m
31 x
6m
m
15.5
x 5
.7m
m
42.5
x 6
mm
45.9
x 7
.6m
m
40 x
7.6
mm
45 x
7.6
mm
35 x
7.8
mm
40 x
8.2
mm
40 x
8.2
mm
34 x
5m
m
31.5
x 5
.5m
m
31.5
x 5
.5m
m
30 x
8.2
mm
40 x
8.2
mm
40 x
8.2
mm
40 x
7m
m
40 x
7m
m
40 x
7m
m
40 x
7m
m
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
40 x
6m
m
44.6
x 1
4.65
mm
44.6
x 1
4.65
mm
72.5
x 2
7.5m
m
95 x
27.
5mm
101
x 31
mm
57 x
27.
5mm
140
x 27
.5m
m
69.5
x 4
4mm
94.5
x 5
1.6m
m
38.2
x 2
2mm
38 x
20m
m
46 x
22.
5mm
54.5
x 2
0mm
46 x
22.
5mm
75.5
x 2
3mm
75.5
x 2
3mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
75.5
x 2
3mm
46 x
22.
5mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
30 x
7m
m
31 x
5m
m
66 x
18.
5mm
61 x
16.
6mm
71 x
20.
6mm
86 x
22.
7mm
40 x
20m
m
50 x
22m
m
48 x
26m
m
65 x
26m
m
43.4
5 x
6mm
08 09 0875(MT-Plate)
13
08 09 0888(DW-Block)
13
08 09 0909(SQW-Block)
13
08 09 0903 (MTRS)
13
08 09 1081 (SQW/SealmatTM)
13
08 14 0641
9
08 14 051308 14 1168
9
08 14 059508 14 1169
9
05 09 0706
9
08 09 02761
08 09 06061
08 09 02841
08 09 08451
08 09 09531
08 09 04051
08 09 04061
08 09 03051
08 09 02581
08 09 10801
06 09 035706 09 12403, 4, 5, 6, 9
06 09 0669
3, 4, 5, 6, 9
06 09 086506 09 13433, 4, 5, 6
06 09 0866
3, 4, 5, 6, 9
05 09 0129
2
05 09 0269
2
05 09 1674
2
05 09 0279
2
05 09 0968
2
13 09 02228, 19
13 09 02808, 19
13 09 13358
13 09 13368
40 09 01468
15 14 05489
15 14 05629
06 09 06519
20 09 0796
10
20 09 087320 09 1690
10
20 09 1222
10
18 09 0864
10
18 09 130618 09 1310
10
18 09 130718 09 1311
10
40 09 067820
18 09 090611
18 09 090711
20 09 078411
22 09 090811
20 09 0342
10
20 09 0801
10
20 09 140520 09 1691
10
20 09 0802
10
20 09 0795
10
20 09 029720 09 1223
10
20 09 0440
10
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
83
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
84 85
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
EPA-Vials ND24 Headspace ND20
Headspace ND20 Headspace ND18
Micro-Inserts for wide opening Micro-Inserts for small opening
Screw Neck ND13 Shell Vials, 4ml (Insert)
Crimp Neck ND8
Inserts for 96 Position Block Systems (RITTER) Shell Vials, 1ml (Insert)Snap Cap Vials
20 09 034310
15 09 170319
15 09 165719
18 09 170419
20 09 170519
24 09 058924 09 0927
12, 19
24 09 083924 09 0923
12, 19
24 09 040224 09 0928
12, 19
24 09 108924 09 1090
12, 19
20 09 0289
10
Crimp Neck ND20
31 x
6m
m
31 x
6m
m
29 x
5.7
mm
31 x
5m
m
31 x
5m
m
27.5
x 4
mm
29 x
5m
m
31 x
6m
m
15.5
x 5
.7m
m
42.5
x 6
mm
45.9
x 7
.6m
m
40 x
7.6
mm
45 x
7.6
mm
35 x
7.8
mm
40 x
8.2
mm
40 x
8.2
mm
34 x
5m
m
31.5
x 5
.5m
m
31.5
x 5
.5m
m
30 x
8.2
mm
40 x
8.2
mm
40 x
8.2
mm
40 x
7m
m
40 x
7m
m
40 x
7m
m
40 x
7m
m
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
40 x
6m
m
44.6
x 1
4.65
mm
44.6
x 1
4.65
mm
72.5
x 2
7.5m
m
95 x
27.
5mm
101
x 31
mm
57 x
27.
5mm
140
x 27
.5m
m
69.5
x 4
4mm
94.5
x 5
1.6m
m
38.2
x 2
2mm
38 x
20m
m
46 x
22.
5mm
54.5
x 2
0mm
46 x
22.
5mm
75.5
x 2
3mm
75.5
x 2
3mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
75.5
x 2
3mm
46 x
22.
5mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
30 x
7m
m
31 x
5m
m
66 x
18.
5mm
61 x
16.
6mm
71 x
20.
6mm
86 x
22.
7mm
40 x
20m
m
50 x
22m
m
48 x
26m
m
65 x
26m
m
43.4
5 x
6mm
08 09 0875(MT-Plate)
13
08 09 0888(DW-Block)
13
08 09 0909(SQW-Block)
13
08 09 0903 (MTRS)
13
08 09 1081 (SQW/SealmatTM)
13
08 14 0641
9
08 14 051308 14 1168
9
08 14 059508 14 1169
9
05 09 0706
9
08 09 02761
08 09 06061
08 09 02841
08 09 08451
08 09 09531
08 09 04051
08 09 04061
08 09 03051
08 09 02581
08 09 10801
06 09 035706 09 12403, 4, 5, 6, 9
06 09 0669
3, 4, 5, 6, 9
06 09 086506 09 13433, 4, 5, 6
06 09 0866
3, 4, 5, 6, 9
05 09 0129
2
05 09 0269
2
05 09 1674
2
05 09 0279
2
05 09 0968
2
13 09 02228, 19
13 09 02808, 19
13 09 13358
13 09 13368
40 09 01468
15 14 05489
15 14 05629
06 09 06519
20 09 0796
10
20 09 087320 09 1690
10
20 09 1222
10
18 09 0864
10
18 09 130618 09 1310
10
18 09 130718 09 1311
10
40 09 067820
18 09 090611
18 09 090711
20 09 078411
22 09 090811
20 09 0342
10
20 09 0801
10
20 09 140520 09 1691
10
20 09 0802
10
20 09 0795
10
20 09 029720 09 1223
10
20 09 0440
10
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
83
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
84 85
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
EPA-Vials ND24 Headspace ND20
Headspace ND20 Headspace ND18
Micro-Inserts for wide opening Micro-Inserts for small opening
Screw Neck ND13 Shell Vials, 4ml (Insert)
Crimp Neck ND8
Inserts for 96 Position Block Systems (RITTER) Shell Vials, 1ml (Insert)Snap Cap Vials
20 09 034310
15 09 170319
15 09 165719
18 09 170419
20 09 170519
24 09 058924 09 0927
12, 19
24 09 083924 09 0923
12, 19
24 09 040224 09 0928
12, 19
24 09 108924 09 1090
12, 19
20 09 0289
10
Crimp Neck ND2031
x 6
mm
31 x
6m
m
29 x
5.7
mm
31 x
5m
m
31 x
5m
m
27.5
x 4
mm
29 x
5m
m
31 x
6m
m
15.5
x 5
.7m
m
42.5
x 6
mm
45.9
x 7
.6m
m
40 x
7.6
mm
45 x
7.6
mm
35 x
7.8
mm
40 x
8.2
mm
40 x
8.2
mm
34 x
5m
m
31.5
x 5
.5m
m
31.5
x 5
.5m
m
30 x
8.2
mm
40 x
8.2
mm
40 x
8.2
mm
40 x
7m
m
40 x
7m
m
40 x
7m
m
40 x
7m
m
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
45 x
14.
7mm
40 x
6m
m
44.6
x 1
4.65
mm
44.6
x 1
4.65
mm
72.5
x 2
7.5m
m
95 x
27.
5mm
101
x 31
mm
57 x
27.
5mm
140
x 27
.5m
m
69.5
x 4
4mm
94.5
x 5
1.6m
m
38.2
x 2
2mm
38 x
20m
m
46 x
22.
5mm
54.5
x 2
0mm
46 x
22.
5mm
75.5
x 2
3mm
75.5
x 2
3mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
75.5
x 2
3mm
46 x
22.
5mm
75.5
x 2
2.5m
m
75.5
x 2
2.5m
m
30 x
7m
m
31 x
5m
m
66 x
18.
5mm
61 x
16.
6mm
71 x
20.
6mm
86 x
22.
7mm
40 x
20m
m
50 x
22m
m
48 x
26m
m
65 x
26m
m
43.4
5 x
6mm
11 09 050011 09 1241
3
11 09 0519
3
11 09 052011 09 1242
3
11 14 118911 14 1265
3
11 14 165511 14 1694
3
11 19 093211 19 1021
7
11 19 1216
7
11 09 0620
3
11 09 0999
3
11 19 120511 19 1516
3,7
11 09 0627
6
11 09 0644
6
11 09 0645
6
11 14 119011 14 1266
5, 6
11 14 165611 14 1695
5, 6
11 19 093311 19 1022
7
11 19 1217
7
11 14 0544
9
11 14 0545
9
11 09 03565
11 09 04765
11 09 04775
11 09 04155
11 09 04865
11 09 01845
11 09 06195
11 09 09215
11 09 08315
11 09 02102, 19
11 09 02592, 19
11 09 04192
11 09 0382 2
11 09 0417 2
10 09 07434
10 09 11964
10 09 11974
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
86
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
87 88
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
Size 11mm 13mm 13mm 20mm 20mm 20mmType of CapMaterial Lacquer
Special features
Centre hole CapAluminium
clear
with roll grove
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Headspace Cap*Aluminium
clear
Size 8mm 11mm 13mm 20mmSize centre hole Material Lacquer
4mm centre hole Aluminium
clear
5.6mm centre hole Aluminium
clear, red, blue, green, gold
6mm centre hole Aluminium
clear, red, blue, green, gold
10mm centre hole Aluminium
plain, red, blue, green, gold
Aluminium Crimp Caps, centre hole
Special Aluminium Crimp Caps
Magnetic Caps, centre hole
PE-Caps for Crimp Necks
Headspace Cap:* This cap has the function of a pressure release cap and is designed with special scorelines whose bridges break open at an internal vial pressure of 3.0 ± 0.5 bar to let the excess pressure escape. It is comparable with the three component PERKIN ELMER Headspace Closure (Aluminium Crimp Cap with slits, metal star washer, liner with ears) which offers the same effect with a different technical design.
Size 8mm 9mm 10mm 13mm 18mm 24mmApprop. VialThreadCap DesignSize centre holeMaterial, colour
Screw Neck Vials ND88-425 thread,
closed or open top5.5mm centre holePP, black or white
Short Thread Vials ND9Short thread,
closed or open top6mm centre hole
PP, black, transparent, blue, red
(on request: yellow, green)
Screw Neck Vials ND1010-425 thread,
open top7mm centre hole
PP, black
Screw Neck Vials ND1313-425 thread,
closed or open top8.5mm centre hole
PP, black, white
Screw Neck Vials ND1818-400 thread,
closed or open top12mm centre hole
PP, black
Screw Neck Vials ND2424-400 thread,
closed or open top12.5mm centre hole
PP, white
Size 8mm 8mm 8mm 8mm 12mm 15mmVial/PlugcombinationPlug SizeMaterial, colourSpecial Features
Plug of 08 14 0641
6mmPE, transparent
Plug of 08 14 0904
8mmPE, blue
Plug of 08 14 0513or 08 14 0595
8mmPE, transparent
with insertion barrier for Micro-Inserts
Plug of 08 14 1168or 08 14 1169
8mmPE, transparent
without insertion barrier for Micro-Inserts
Plug of 11 14 0544or 11 14 0545
12mmPE, transparent
Plug of 15 14 0548or 15 14 0562
15mmPE, transparent
Size 11mmApprop. VialCap DesignSize centre holeMaterialColour
Snap Ring Vials ND11open top
6mm centre holePE
transparent, blue, red(upon request: yellow, green)
Size 18mm 22mm 28mmApprop. VialCap DesignSize CapMaterialColour
Snap Cap Vials ND18closed top
19.8 x 5.2mmPE
transparent
Snap Cap Vials ND22closed top
23.5 x 5.5mmPE
transparent
Snap Cap Vials ND28closed top
29.7 x 5.6mmPE
transparent
Screw Caps
PE-Plugs for Shell Vials
Snap Ring Caps
Snap Caps
Crimp Neck ND11
Snap Ring ND11 Shell Vials, 2ml
Short Thread ND9
Screw Neck ND8, small opening Screw Neck ND10, wide opening
smallopening
Size 11mm Crimp Cap
20mm Crimp Cap
20mm Crimp Cap
20mm Bimetal Crimp Cap
18mm Screw Cap
18mm Screw Cap
Size centre holeApplicationMaterialLacquer
5mm centre hole(GC)
magneticgold
GC PAL,Thermo TriPlus
5mm centre hole(HS)
magneticgold
CE HS500/HS800, CTC 500Fisons HS500/HS800
8mm centre hole(HS)
magneticgold
CTC Combi PAL,Thermo TriPlus
8mm centre hole(HS)
magneticred
CTC Combi PAL,Thermo TriPlus
8mm centre hole (Universal)(Headspace/SPME)
magneticsilver
CTC Combi PAL,Thermo TriPlus
closed topUniversal Screw Cap
silver
Size 8mm 9mm 9mm 11mm 13mm 22mm 22mmApprop. Vial
Size CapSize centre hole
Material, colour
For Crimp Neck ND8
8mmwith thinned
penetration pointPE, blue
For 96 Block Inserts
9 x 5.9mm4mm centre hole
PE, red
For Crimp Neck ND8
9 x 5.9mm4mm centre hole
PE, transparent
For Crimp Neck and Snap Ring ND11
11mmwith thinned
penetration pointPE, blue
For Crimp Neck ND11
13 x 7.5mm4.5mm centre hole
PE, transparent
For HS Neck ND20
22 x 8.4mm4.3mm centre hole
PE, transparentonly for bevelled tops
For Crimp Neck ND20
22 x 9.1mm4.3mm centre hole
PE, transparentonly for flat
DIN Crimp Necks!
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
10m
m
32 x
11.
6mm
32 x
11.
6mm
41 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
31.5
x 1
1.6m
m
31.5
x 1
1.6m
m
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
11 09 050011 09 1241
3
11 09 0519
3
11 09 052011 09 1242
3
11 14 118911 14 1265
3
11 14 165511 14 1694
3
11 19 093211 19 1021
7
11 19 1216
7
11 09 0620
3
11 09 0999
3
11 19 120511 19 1516
3,7
11 09 0627
6
11 09 0644
6
11 09 0645
6
11 14 119011 14 1266
5, 6
11 14 165611 14 1695
5, 6
11 19 093311 19 1022
7
11 19 1217
7
11 14 0544
9
11 14 0545
9
11 09 03565
11 09 04765
11 09 04775
11 09 04155
11 09 04865
11 09 01845
11 09 06195
11 09 09215
11 09 08315
11 09 02102, 19
11 09 02592, 19
11 09 04192
11 09 0382 2
11 09 0417 2
10 09 07434
10 09 11964
10 09 11974
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
86
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
87 88
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
Size 11mm 13mm 13mm 20mm 20mm 20mmType of CapMaterial Lacquer
Special features
Centre hole CapAluminium
clear
with roll grove
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Headspace Cap*Aluminium
clear
Size 8mm 11mm 13mm 20mmSize centre hole Material Lacquer
4mm centre hole Aluminium
clear
5.6mm centre hole Aluminium
clear, red, blue, green, gold
6mm centre hole Aluminium
clear, red, blue, green, gold
10mm centre hole Aluminium
plain, red, blue, green, gold
Aluminium Crimp Caps, centre hole
Special Aluminium Crimp Caps
Magnetic Caps, centre hole
PE-Caps for Crimp Necks
Headspace Cap:* This cap has the function of a pressure release cap and is designed with special scorelines whose bridges break open at an internal vial pressure of 3.0 ± 0.5 bar to let the excess pressure escape. It is comparable with the three component PERKIN ELMER Headspace Closure (Aluminium Crimp Cap with slits, metal star washer, liner with ears) which offers the same effect with a different technical design.
Size 8mm 9mm 10mm 13mm 18mm 24mmApprop. VialThreadCap DesignSize centre holeMaterial, colour
Screw Neck Vials ND88-425 thread,
closed or open top5.5mm centre holePP, black or white
Short Thread Vials ND9Short thread,
closed or open top6mm centre hole
PP, black, transparent, blue, red
(on request: yellow, green)
Screw Neck Vials ND1010-425 thread,
open top7mm centre hole
PP, black
Screw Neck Vials ND1313-425 thread,
closed or open top8.5mm centre hole
PP, black, white
Screw Neck Vials ND1818-400 thread,
closed or open top12mm centre hole
PP, black
Screw Neck Vials ND2424-400 thread,
closed or open top12.5mm centre hole
PP, white
Size 8mm 8mm 8mm 8mm 12mm 15mmVial/PlugcombinationPlug SizeMaterial, colourSpecial Features
Plug of 08 14 0641
6mmPE, transparent
Plug of 08 14 0904
8mmPE, blue
Plug of 08 14 0513or 08 14 0595
8mmPE, transparent
with insertion barrier for Micro-Inserts
Plug of 08 14 1168or 08 14 1169
8mmPE, transparent
without insertion barrier for Micro-Inserts
Plug of 11 14 0544or 11 14 0545
12mmPE, transparent
Plug of 15 14 0548or 15 14 0562
15mmPE, transparent
Size 11mmApprop. VialCap DesignSize centre holeMaterialColour
Snap Ring Vials ND11open top
6mm centre holePE
transparent, blue, red(upon request: yellow, green)
Size 18mm 22mm 28mmApprop. VialCap DesignSize CapMaterialColour
Snap Cap Vials ND18closed top
19.8 x 5.2mmPE
transparent
Snap Cap Vials ND22closed top
23.5 x 5.5mmPE
transparent
Snap Cap Vials ND28closed top
29.7 x 5.6mmPE
transparent
Screw Caps
PE-Plugs for Shell Vials
Snap Ring Caps
Snap Caps
Crimp Neck ND11
Snap Ring ND11 Shell Vials, 2ml
Short Thread ND9
Screw Neck ND8, small opening Screw Neck ND10, wide opening
smallopening
Size 11mm Crimp Cap
20mm Crimp Cap
20mm Crimp Cap
20mm Bimetal Crimp Cap
18mm Screw Cap
18mm Screw Cap
Size centre holeApplicationMaterialLacquer
5mm centre hole(GC)
magneticgold
GC PAL,Thermo TriPlus
5mm centre hole(HS)
magneticgold
CE HS500/HS800, CTC 500Fisons HS500/HS800
8mm centre hole(HS)
magneticgold
CTC Combi PAL,Thermo TriPlus
8mm centre hole(HS)
magneticred
CTC Combi PAL,Thermo TriPlus
8mm centre hole (Universal)(Headspace/SPME)
magneticsilver
CTC Combi PAL,Thermo TriPlus
closed topUniversal Screw Cap
silver
Size 8mm 9mm 9mm 11mm 13mm 22mm 22mmApprop. Vial
Size CapSize centre hole
Material, colour
For Crimp Neck ND8
8mmwith thinned
penetration pointPE, blue
For 96 Block Inserts
9 x 5.9mm4mm centre hole
PE, red
For Crimp Neck ND8
9 x 5.9mm4mm centre hole
PE, transparent
For Crimp Neck and Snap Ring ND11
11mmwith thinned
penetration pointPE, blue
For Crimp Neck ND11
13 x 7.5mm4.5mm centre hole
PE, transparent
For HS Neck ND20
22 x 8.4mm4.3mm centre hole
PE, transparentonly for bevelled tops
For Crimp Neck ND20
22 x 9.1mm4.3mm centre hole
PE, transparentonly for flat
DIN Crimp Necks!
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
10m
m
32 x
11.
6mm
32 x
11.
6mm
41 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
31.5
x 1
1.6m
m
31.5
x 1
1.6m
m
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
11 09 050011 09 1241
3
11 09 0519
3
11 09 052011 09 1242
3
11 14 118911 14 1265
3
11 14 165511 14 1694
3
11 19 093211 19 1021
7
11 19 1216
7
11 09 0620
3
11 09 0999
3
11 19 120511 19 1516
3,7
11 09 0627
6
11 09 0644
6
11 09 0645
6
11 14 119011 14 1266
5, 6
11 14 165611 14 1695
5, 6
11 19 093311 19 1022
7
11 19 1217
7
11 14 0544
9
11 14 0545
9
11 09 03565
11 09 04765
11 09 04775
11 09 04155
11 09 04865
11 09 01845
11 09 06195
11 09 09215
11 09 08315
11 09 02102, 19
11 09 02592, 19
11 09 04192
11 09 0382 2
11 09 0417 2
10 09 07434
10 09 11964
10 09 11974
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
86
La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected] La-Pha-Pack® . Werner Reifferscheidt GmbH . Telephone +49 (0) 24 23 / 94 31-0 . Fax +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
87 88
Ove
rvie
w o
n 1:
1 Dr
awin
gs o
f all
Stan
dard
Sam
ple
Vial
s/Dr
awin
gs o
f Cap
s
Size 11mm 13mm 13mm 20mm 20mm 20mmType of CapMaterial Lacquer
Special features
Centre hole CapAluminium
clear
with roll grove
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Centre Tear Off CapAluminium
clear, red, blue, green, gold
Complete Tear Off CapAluminium
clear, red, blue, green, gold
Headspace Cap*Aluminium
clear
Size 8mm 11mm 13mm 20mmSize centre hole Material Lacquer
4mm centre hole Aluminium
clear
5.6mm centre hole Aluminium
clear, red, blue, green, gold
6mm centre hole Aluminium
clear, red, blue, green, gold
10mm centre hole Aluminium
plain, red, blue, green, gold
Aluminium Crimp Caps, centre hole
Special Aluminium Crimp Caps
Magnetic Caps, centre hole
PE-Caps for Crimp Necks
Headspace Cap:* This cap has the function of a pressure release cap and is designed with special scorelines whose bridges break open at an internal vial pressure of 3.0 ± 0.5 bar to let the excess pressure escape. It is comparable with the three component PERKIN ELMER Headspace Closure (Aluminium Crimp Cap with slits, metal star washer, liner with ears) which offers the same effect with a different technical design.
Size 8mm 9mm 10mm 13mm 18mm 24mmApprop. VialThreadCap DesignSize centre holeMaterial, colour
Screw Neck Vials ND88-425 thread,
closed or open top5.5mm centre holePP, black or white
Short Thread Vials ND9Short thread,
closed or open top6mm centre hole
PP, black, transparent, blue, red
(on request: yellow, green)
Screw Neck Vials ND1010-425 thread,
open top7mm centre hole
PP, black
Screw Neck Vials ND1313-425 thread,
closed or open top8.5mm centre hole
PP, black, white
Screw Neck Vials ND1818-400 thread,
closed or open top12mm centre hole
PP, black
Screw Neck Vials ND2424-400 thread,
closed or open top12.5mm centre hole
PP, white
Size 8mm 8mm 8mm 8mm 12mm 15mmVial/PlugcombinationPlug SizeMaterial, colourSpecial Features
Plug of 08 14 0641
6mmPE, transparent
Plug of 08 14 0904
8mmPE, blue
Plug of 08 14 0513or 08 14 0595
8mmPE, transparent
with insertion barrier for Micro-Inserts
Plug of 08 14 1168or 08 14 1169
8mmPE, transparent
without insertion barrier for Micro-Inserts
Plug of 11 14 0544or 11 14 0545
12mmPE, transparent
Plug of 15 14 0548or 15 14 0562
15mmPE, transparent
Size 11mmApprop. VialCap DesignSize centre holeMaterialColour
Snap Ring Vials ND11open top
6mm centre holePE
transparent, blue, red(upon request: yellow, green)
Size 18mm 22mm 28mmApprop. VialCap DesignSize CapMaterialColour
Snap Cap Vials ND18closed top
19.8 x 5.2mmPE
transparent
Snap Cap Vials ND22closed top
23.5 x 5.5mmPE
transparent
Snap Cap Vials ND28closed top
29.7 x 5.6mmPE
transparent
Screw Caps
PE-Plugs for Shell Vials
Snap Ring Caps
Snap Caps
Crimp Neck ND11
Snap Ring ND11 Shell Vials, 2ml
Short Thread ND9
Screw Neck ND8, small opening Screw Neck ND10, wide opening
smallopening
Size 11mm Crimp Cap
20mm Crimp Cap
20mm Crimp Cap
20mm Bimetal Crimp Cap
18mm Screw Cap
18mm Screw Cap
Size centre holeApplicationMaterialLacquer
5mm centre hole(GC)
magneticgold
GC PAL,Thermo TriPlus
5mm centre hole(HS)
magneticgold
CE HS500/HS800, CTC 500Fisons HS500/HS800
8mm centre hole(HS)
magneticgold
CTC Combi PAL,Thermo TriPlus
8mm centre hole(HS)
magneticred
CTC Combi PAL,Thermo TriPlus
8mm centre hole (Universal)(Headspace/SPME)
magneticsilver
CTC Combi PAL,Thermo TriPlus
closed topUniversal Screw Cap
silver
Size 8mm 9mm 9mm 11mm 13mm 22mm 22mmApprop. Vial
Size CapSize centre hole
Material, colour
For Crimp Neck ND8
8mmwith thinned
penetration pointPE, blue
For 96 Block Inserts
9 x 5.9mm4mm centre hole
PE, red
For Crimp Neck ND8
9 x 5.9mm4mm centre hole
PE, transparent
For Crimp Neck and Snap Ring ND11
11mmwith thinned
penetration pointPE, blue
For Crimp Neck ND11
13 x 7.5mm4.5mm centre hole
PE, transparent
For HS Neck ND20
22 x 8.4mm4.3mm centre hole
PE, transparentonly for bevelled tops
For Crimp Neck ND20
22 x 9.1mm4.3mm centre hole
PE, transparentonly for flat
DIN Crimp Necks!
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
10m
m
32 x
11.
6mm
32 x
11.
6mm
41 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
31.5
x 1
1.6m
m
31.5
x 1
1.6m
m
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
32 x
11.
6mm
10ml + 20ml Precision ThreadVials with Magnetic Screw Seals
(8mm centre hole/closed top)
TPX Short Thread Vials ND9 or Snap Ring Vials ND11 with
Glass Micro-Insert (clear/amber)
Screw Neck Vials with different volumes in clear and amber glass
for storage purposes
Vial Racks for Crimp Neck Vials ND8, for all 2ml, 4ml and
Headspace Vials
1.5ml Polypropylene Short Thread Vialswith filling lines
(transparent/amber)
ProFill TM PLUS – HPLC Syringe Filters with Glass Fibre Prefilter
10ml + 20ml amber Headspace Vials for different Autosampler
SilanizedShort Thread Vials ND9
and Micro-Inserts/TopSert TM
8mm + 11mm PE Push-On Capswith thinned penetration point
PLUS
Dear Customer!
You are a valued partner of ours. In case the catalogue does not answer your questions sufficiently, please contact us either
by phone: +49 (0) 24 23 / 94 31-0 by fax: +49 (0) 24 23 / 94 31-33 or by E-Mail: [email protected]
Furthermore you are also always welcome to visit us either virtually under www.la-pha-pack.com
or personally in our plant.
NEW
La-P
ha-P
ack®
Wer
ner
Reiff
ersc
heid
t Gm
bH 2
006
Am Parir 20 . D-52379 Langerwehe P.O. Box 1120 . D-52373 LangerweheTel.: +49 (0) 24 23 / 94 31-0Fax: +49 (0) 24 23 / 94 31-33Internet: www.la-pha-pack.comE-Mail: [email protected]
Your Partner for reliable closure technique in laboratories
La-Pha-Pack® Werner Reifferscheidt GmbH . P.O. Box 1120 . D-52373 Langerwehe . www.la-pha-pack.comTel.: +49 (0) 24 23 / 94 31-0 . Fax: +49 (0) 24 23 / 94 31-33 . E-Mail: [email protected]
Represented by:
Your Partner for reliable