www.dartcontrols.com

ISO 9001 Registered

Your Motion SystemsSolutions Provider

H.P. Range 1/50 to 2.0 HP Dual Voltage Input 120/240 VAC; Output 90/180 VDC Mounting Chassis • NEMA 4/12 • NEMA 4X Certification U.L. • C.S.A Features • Adjustable horsepower settings • AC line fuse • Optional isolated current or voltage follower with auto/manual function • Barrier terminal strip

2 3

phone: (317) 733-2133 fax: (317) 873-1105

250 Series Variable Speed DC Control

H.P. Range 1/8 to 3 HP (chassis) to 2 HP (enclosed) Dual Voltage Input 120/240 VAC; Output 90/180 VDC Mounting Chassis, NEMA 4/12 Certification cUL • UL Features • 2 AC line fuses • Power-interrupt relays allow local/remote switching of AC with low-current momentary contacts • Optional forward/reverse with dynamic brake that can operate off SPDT switch, dry contact or NPN open collector

500 Series Variable Speed DC Control

H.P. Range 1/50 to 1.0 HP (2 HP w/ optional heatsink) Input Voltage 120 VAC or 240 VAC models available Mounting Chassis, 125 Series footprint Features • Adjustable horsepower settings • Adjustable Min/Max speed, IR comp, and CL • Fixed acceleration (0.5 sec.) or 6 sec. “soft start” option • Zero speed detect circuit • Automatic dynamic braking on power loss

130 Series Reversing Control

For complete specifications, see: www.dartcontrols.com

4 5

H.P. Range 1/40 to 1/3 HP Dual Voltage Input 120/240 VAC; Output 90/180 VDC Plus low voltage 12/24 VAC available Mounting Two chassis configurations plus NEMA 4/12 Certification U.L. • cUL • CE Features • Integral speed pot for ease of wiring • AC line fuse (enclosed model) • Power on/off switch (enclosed model)

15 Series Variable Speed DC Control

H.P. Range 1/50 to 1.0 HP (2 HP w/ optional heatsink) Dual Voltage Input 120/240 VAC; Output 90/180 VDC Low voltage input 24/36 VAC available Mounting Chassis Certification UL • C.S.A. • CE Features • Adjustable horsepower settings • Adjustable Min/Max speed, IR comp, and CL • Optional isolated current or voltage follower • Fuse board available with (2) 15 Amp 3AG fuses • Barrier terminal strip

125 Series Variable Speed DC Control

H.P. Range 1/50 to 2.0 HP Input Voltage Switching power supply supports 85-265 VAC input Mounting 1/8 or 1/4 DIN panel mount, or NEMA 4/12 enclosure; NEMA 4X faceplate (gasket supplied) Certification C.S.A • UL listing pending Features • Front panel programming (w/lock-out capability) • Set target speed for any engineering unit of measure (rate or time) • Alarm relay output (form C 5 Amp at 250 VAC) • Large 1/2” LED display

MD Series Field Programmable Digital Closed Loop DC Speed Control

For complete specifications, see: www.dartcontrols.com phone: (317) 733-2133 fax: (317) 873-1105

6 7

Input Voltage Switching power supply supports 85-265 VAC input Accuracy +/- 1/2 RPM of set speed (time), long term Mounting 1/8 DIN panel mount, NEMA 4X faceplate (gasket supplied) Features • Rate or time operation • Master/follower operation • Large 1/2” LED display • Front panel programming (with lockout capability)

H.P. Range 1/50 to 2.0 HP Input Voltage Switching power supply supports 85-265 VAC input Mounting 1/8 or 1/4 DIN panel mount or NEMA 4/12 enclosure Certification cUL • UL listing pending Features • Many of the features of MD Series PLUS • Adjustable PID setting for customizing each application • Accepts external 0-5 VDC or 4-20ma inputs • Front panel or serial interface programmable • User assignable output (NPN)

Input Voltage Switching power supply supports 85-265 VAC input Accuracy +/- 1/2 RPM of set speed Mounting 1/8 DIN panel mount, NEMA 4X faceplate (gasket supplied) Features • Many of the features of the ASP Series PLUS • Adjustable PID setting for customizing each application • Up to six different set-ups can be programmed • Accepts external 0-5 VDC or 4-20ma inputs • Front panel or serial interface programmable • User assignable output (NPN)

MDII Series Field Programmable Digital Closed Loop DC Speed Control

ASP Series Digital Closed Loop Control System for Conventional AC or DC Drives

ASPII Series Digital Closed Loop Control System for Conventional AC or DC Drives

For complete specifications, see: www.dartcontrols.com phone: (317) 733-2133 fax: (317) 873-1105

8 9

Input Voltage Switching power supply supports 85-265 VAC input Accuracy +/- 0.04% Features • 1–125,000 input pulses per minute • Microprocessor based • Up to 2 relay alarm outputs (form C 5 Amp @ 250 VAC) • Front panel programming (lockout capability) • Selectable control modes (totaling, counting, etc.) • User-default parameter storage capability

Input Voltage Switching power supply supports 85-265 VAC input Output Support +/- 12 VDC or lower or 0 to +/- 24 VDC Features • Supports bipolar connections for regen or standard reversing controls • Control mode selectable between rate and time • Jog function selectable from several modes • Alarm relay output (form C 5 Amp @ 250 VAC)

Input Voltage 120 VAC at 50/60 Hz Features • One speed pot controls up to eight speed controls • Allows ratio control of multiple drives • Electrical isolation from AC • Each channel is isolated from the others • Interfaces with Dart's 125, 250, or 500 Series controls and others • European style terminal block connections

DP4 Series Digital Speed Potentiometer with Scalable Display and User I/0

MSC38A Series Eight Channel Master Speed Control

For complete specifications, see: www.dartcontrols.com phone: (317) 733-2133 fax: (317) 873-1105

DM8000 Series Field Programmable Digital Tachometer and Process Meter

10 11

Input Voltage 12, 24, or 36 VDC Load Current 10, 20, 40, and 60 Amps continuous Overload Capacity 200% for 10 seconds, 150% for 1 minute Features • Automatic compensation for declining battery voltage • Current foldback thermal protection included on larger capacity models • New 65E10 compact 10 Amp unit in 125 Series footprint

Ratings 5 & 20 Amp models for 12, 24, & 36 VDC inputs Features • Open loop and integrated closed loop models available • Quiet 15 kHz PWM switching frequency • MOSFET power devices • Directional control… forward/reverse • Internal +6.2 VDC, 20ma supply for motor Hall-effect sensors • Adjustable accel/decel and current limit • Bi-directional control with speed pot (703) (wig-wag)

HP Range 1/3 to 5.0 HP Input Voltage 120 or 240 VAC or 460 VAC Single Phase Output Voltage 240 VAC or 460 VAC Three Phase Mounting NEMA 1 Certifications CuL • UL Features • Variable torque, Constant torque, or Constant Horsepower applications • Dual microprocessor controlled PWM output • Dynamic Braking available • Two analog inputs • Optional remote mount keypad

1200 Series Digital Interface AC Inverter

700/Commutrol Series DC Brushless Motor Controls

For complete specifications, see: www.dartcontrols.com phone: (317) 733-2133 fax: (317) 873-1105

65E Series Battery Operated DC Motor Speed Controls

12 13

Input Voltage 120 or 240 VAC at 45 – 65 Hz Output Voltage 0-120 VAC or 0-240 VAC single phase Maximum AC Output Current 10/15 Amps Maximum Capacity 3450 Watts Features • Controls most single phase AC motors and resistive loads, not equipped to handle capacitor start motors • Typically used on fan, blower, pump, or vibratory feeder applications

55AC Variable AC Voltage Control

HP Range up to 1/2 HP Input Voltage 120 or 240 VAC at 45–65 Hz Output Voltage 0-240 VAC Three Phase Mounting Chassis, NEMA 1, NEMA 4, or DIN rail Certifications UL • cUL • CE Features • Simple setup • DC Injection Braking • Constant torque or fan curve setting • Output frequency up to 120 Hz

1000 Series Analog Interface AC Inverter

Input Voltage 120 VAC Output Voltage 0-120 VAC Maximum AC Output Current 2.5 Amps Certifications UL recognized Features • Controls most single phase AC motors and resistive loads, not equipped to handle capacitor start motors • Speed pot with on/off switch

ACO3 Series Variable AC Voltage Supply

For complete specifications, see: www.dartcontrols.com phone: (317) 733-2133 fax: (317) 873-1105

14 15

HP Range 1⁄4 to 2.0 HP Armature Volts 90 VDC and 180 VDC Base Speed 1750 RPM Enclosure TENV and TEFC Certification UL • C.S.A. • CE mark listed Mounting NEMA 56 C-face and Bolt-on

Supply Voltage 4.5 to 24 VDC Features • Unique patented design mounts to most rotating shafts • NPN output signal with built-in pull-up resistor • Up to 10 pulses per revolution • Single channel and quadrature models available

PU-E Series Hall Effect Pick-up

Accent Dart has perfected its lean manufacturing on Service process to be able to schedule production

runs in multiple quantities and models. We can promise shipment the same day on standard products and within five days for specials.Check out our web site for complete speci-fications on all our products and then put us to the test.

www.dartcontrols.com

Dart Delivers

Standard Permanent Magnetic Field DC Motors for Adjustable Speed Drives

Customer (317) 733-2133 ext. 350 Service customerservice@dartcontrols.com

Sales (317) 873-5211 sales@dartcontrols.com

Application (317) 733-2133 ext. 330 Support applications@dartcontrols.com

Technical (317) 733-2133 ext. 460 Support techsupport@dartcontrols.com

Customer (317) 873-5211 Feedback feedback@dartcontrols.com

Fax (317) 873-1105

P.O. Box 105000 W

est 106th StreetZionsville, Indiana 46077

ww

w.dartcontrols.com

©2003, Dart Controls, Inc. 10M/9-01