Your Growth Partner, SAMCHANG
Transcript of Your Growth Partner, SAMCHANG
![Page 1: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/1.jpg)
Your Growth Partner,
SAMCHANG
Your Grow
th Partner, SAM
CH
AN
Gw
ww
.scfcasting.com
www.scfcasting.com
![Page 2: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/2.jpg)
Contents
02 Company History 03 Manpower Status 04 Facilities and Equipments
07 Fire Safety Valves 37 Oil/Shale Gas Flowline Products
Why SAMCHANG as your Growth Partner?Mutually Beneficial for SAMCHANG and Its Clients
SAMCHANG has the only one goal, “To become the best partner for its clients' growth”As a casting specialist, SAMCHANG has achieved joint growth with its clients based on the clients' trust for the past 50 years.
BusinessPortfolio
Oil/Shale GasFlowline Products
Fire SafetyValves
CastingProducts
![Page 3: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/3.jpg)
02
2016 Approved by API for Flowline Products
Approved by GOST, EAC for Butterfly Valve
Small Giants Company approved by Ministry of Trade, Industry and
Energy of Korea
2015 Approved by UL, ULC and FM for Swing Check Valves
Awarded Five (5) MUSD Exportation Prize
2012 Established R&D Center
2008 Replaced AMF Horizontal Automatic Molding Machine to AMF-IV
2007 Certified ISO/TS16949:2002
2005 Certified QS9000:1998
Installed DISA Molding Machine (2013MKIII)
2004 Certificated as foundry factory by Tokyo Subway Company
2003 Installed Electric Furnace(2.0t×2)
Certified ISO9001:2000
1999 ISO 9001 Certified
Awarded One MUSD Exportation Prize
1995 Approved by UL, ULC and FM for Gate Valves
Installed Electric Furnace(2.5ton)
Open US Subsidiary(Global Safety Products Inc.)
1987 Moved from Seoul to Inchon
Approved by UL, ULC and FM for Butterfly Valves
(The FIRST COMPANY in Asia)
1977 Established as Sam Chang Foundry Co., Ltd.
1967 Established as Sam Chang Foundry
SAMCHANG’s 50 years history since 1967
Founded in 1967, SAMCHANG has been creating the best products with its independently developed technologies, production facilities and assembly lines built over the last 50 years and the best quality control process.
![Page 4: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/4.jpg)
03
SAMCHANG’s R&D center established in 2012 is dedicated to developing new technologies with which SAMCHANG designs and manufactures new products. And by cooperating with its overseas partners, SAMCHANG has been exporting products to key countries in America, Europe, Middle East, Ocenaia and Asia.
SAMCHANG's Technology is Spreading throughout the World.
R&D CENTER
Technical Fields • Casting(Gray Iron, Ductile Iron) • Valves(Butterfly, Check, Plug, Choke etc.) • Fittings, Couplings, Flexible Drop etc. • Oil Tools and Flowline products
Role & Responsibility• New product development • Conduct National Tech. Development Project • Project for International Standard Approval • Technical support for manufacturing • Complement existing products • Supervision for Subcontractors
US SUBSIDIARY
Global Safety Products, Inc. • Established in 1995• California, USA • Handling Products- FireSafety Butterfly Valves- FireSafety Swing Check Valves- FireSafety Gate Valves- Flexible Hose & Fittings- Heavy Industrial Casting Products
Advancing the establishment• Texas, USA• Handling Products- Oil Field / Shale Gas Flowline Products- Oil Tools
CALIFORNIA
TEXAS
![Page 5: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/5.jpg)
04
Casting
MELTING
• Melting Furnace- 2.5 ton 1 Source 1 Body
(Inductotherm, USA)
- 2.0 ton 1 Source 2 Bodies (AMM, UK)
MOLDING
• Automatic Molding Line- AMF IV-06R Horizontal
610x508x400, 160 mold/hr (Tokyu, JPN)
- DISA 2013MK-3 Vertical 600x480x330, 360 mold/hr (DISA, DEN)
• Sand Preparation- 1.5 ton/batch, 40 ton/hr
(B&P, USA)
BLASTING
• Shot Blast M/C- Apron Type M/C
1.2 ton, 30 min/piece (Sekwang-shot, KOR)
- Drum Type M/C 1.5 ton, 30 min/piece (Sekwang Engineering, KOR)
POST PROCESS
• Trimming Press M/C - 60 ton x 1 set
(KIA Machinery, KOR)
• Bench Grinder - Two Heads Grinding Φ650, Φ405 (Tae Sung, KOR)
SAMCHANG Makes Only the Higher Quality Products
SAMCHANG has internally developed state-of-the-art manufacturing facilities which operate under strict quality control. These are the reasons for the excellent quality of SAMCHANG’s products.
FACILITIES & EQUIPMENT
![Page 6: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/6.jpg)
05
Machining
QA/QC
• Universal Testing Machine, 30 ton (Kyeongdo mfg. Ltd., KOR)• Brinell Hardness Testing Machine - DTB-500 (Daekyung Tech, KOR)• Metallurgical Microscope - XJP-6A (COIC, ITA)• Spectrometer - SPECTRO MAXx (AMETEK, GER)• CE Meter - 255ICS (Nisabu, JPN)• Ultrasonic Inspection Meter - USM 35DAC (Krautkramer, GER)• Ultrasonic Thickness Gauge - CL5 (Krautkramer, GER)
• Sand Testing (SIMPSON, USA) - Electronic Laboratory Shifter - Sand Rammer - Digital Permeability Meter - Moisture Analyzer - Electronic Universal Sand Strength Machine • Rubber Hardness Tester - GS-706N (Teclock, JPN) • Coating Thickness Gauge - TM510FN (TMTeck, CHN)• Leak Tester 2,500 Bar (ENPOS, KOR)• Leak Tester 100 Bar (Custom Made, KOR)
CNC
• V-850 (Doosan, KOR)• ECO 5V R (Hwacheon, KOR)• HI-ECO 31A (Hwacheon, KOR)• PUMA 12L (Doosan, KOR)• PUMA 240 (Doosan, KOR)• DC-3000 (Daegu, KOR)
MILLING
• HF NO2 (ENSHU, JPN)• DMB U54 (Doosan, KOR)• HMTH-1300N (Hwacheon, KOR)
MCT
• HC500 (Horizontal) (Daewoo, KOR)• KH50G (Horizontal) (Hyundai, KOR)• PCV-50 (Vertical) (Samsung, KOR)• LCV50 (Vertical) (Samsung, KOR)
LATHE
• DML (850 x 1500) (Daewoo, KOR)• DL850-1500G (Daewoo, KOR)• NSL (480 x 1000G) (Hwacheon, KOR) • DL (580 x 1500G) (Daewoo, KOR)
DRILLING
• NBTG 540 (Nambuk, KOR)• NBTG 540 (Nambuk, KOR)• DRD-1000 (Doosan, KOR)
CUSTOM MADE
• BFV BODY HOLE (Samwoo, KOR)• BFV DISC HOLE (Samwoo, KOR)
![Page 7: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/7.jpg)
06
SAMCHANG's Products are Internationally Certified
SAMCHANG, as the first in Asia, earned UL and FM certifications for Fire Safety Butterfly Valve and has established a technology research center to ensure independent technological development. With in-house technological capabilities secured, SAMCHANG has been exporting products to key countries in America, Europe, Middle East, Ocenaia and Asia.
![Page 8: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/8.jpg)
FIRE SAFETYVALVES
![Page 9: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/9.jpg)
08
BUTTERFLY VALVE GROOVED END
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved End Butterfly Valves in below Table are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed.
They are used, for example, as system, sectional and pump water control valves. They have grooved inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems.
The details of connection should be checked by owner with manufacturer before purchasing.
For applications requiring supervision of the open or closed position of the valve, the Gear Operators for the Models are provided with two sets of factory installed internal switches each having SPDT contacts.
The supervisory switches transfer their electrical contacts when there is movement from the normally open or normally closed disc position during the first two revolutions of the handwheel.
TECHNICAL DATA
ModelApprovals Working
Pressure(psi / bar)
Gearbox Body DiscSuper-visorySwitch
Size
UL ULC FM CE VdS 2-1/2" 3" 4" 5" 6" 8" 10" 12" DN65 DN80 DN100 DN125 DN150 DN200 DN250
BOG310 ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BOG310T ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯
BO-G300 ◯ ◯ ◯ ◯ 300 / 20.7 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BOG300T ◯ ◯ ◯ 300 / 20.7 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯✽ ◯✽ ◯✽ ◯✽ ◯✽ ◯ ◯✽ ◯✽ ◯✽ ◯✽ ◯✽
BVG1 ◯ 175 / 12.0 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
BO-G ◯ ◯ ◯ 175 / 12.0 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯✽✽ ◯✽✽ ◯✽✽ ◯✽✽ ◯✽✽ ◯ ◯✽✽ ◯✽✽ ◯✽✽ ◯✽✽ ◯✽✽ ◯✽✽ ◯
BO-GT ◯ ◯ ◯ 175 / 12.0 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯
BV-G ◯ ◯ ◯ ◯ 175 / 12.0 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Indoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved
End Butterfly Valves described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. The owner is responsible for
maintaining their fire protection system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
✽ FM only ✽✽ UL only
![Page 10: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/10.jpg)
09
GROOVED ENDSUPERVISED CLOSED
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved End Butterfly Valves in below Table are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed.
They have grooved inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems.
The details of connection should be checked by owner with manufacturer before purchasing.
For applications requiring supervision of the open or closed position of the valve, the Gear Operators for the Models are provided with two sets of factory installed internal switches each having SPDT contacts.
The supervisory switches transfer their electrical contacts when there is movement from the normally open or normally closed disc position during the first two revolutions of the handwheel.
TECHNICAL DATA
These valves cannot be installed between the fire protection system water source and sprinkler
heads. Intended for use in fire pump test bypass lines only.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved
End Butterfly Valves described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. The owner is responsible for
maintaining their fire protection system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
✽ FM only ✽✽ UL only
ModelApprovals Working
Pressure(psi / bar)
Gearbox Body DiscSuper-visorySwitch
Size
UL ULC FM CE VdS 2-1/2" 3" 4" 5" 6" 8" 10" 12" DN65 DN80 DN100 DN125 DN150 DN200 DN250
BOG310C ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
BOG310TC ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BO-G300C ◯ ◯ ◯ ◯ 300 / 20.7 SegmentDuctile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BOG300TC ◯ ◯ ◯ 300 / 20.7 SegmentDuctile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯✽✽ ◯ ◯ ◯ ◯✽ ◯ ◯✽✽
BO-GTC ◯ ◯ ◯ 175 / 12.0 SegmentDuctile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯
![Page 11: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/11.jpg)
10
Grooved End Butterfly Valve
BO-G310 / BO-G310C
Nominal Valve Size
Inches (DN)
Pipe OD
Inches (mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
2(DN 50)
2.37(60.3)
3.86(98.0)
3.8(96.4)
4.24(107.8)
2.37(60.3)
4.90(124.5)
3.90(99.0)
4.13(105.0)
3.94(100.0)
10.63(270)
10.80(4.9)
2-1/2(DN65)
2.88(73.0)
4.48(113.8)
3.8(96.4)
4.24(107.8)
2.88(73.0)
5.50(139.8)
3.90(99.0)
4.13(105.0)
3.94(100.0)
11.72(297.8)
11.2(5.1)
76.1(DN65)
3(76.1)
4.48(113.8)
3.8(96.4)
4.24(107.8)
3(76.1)
5.50(139.8)
3.90(99.0)
4.13(105.0)
3.94(100.0)
11.72(297.8)
11.2(5.1)
3(DN80)
3.5(88.9)
4.73(120.3)
3.8(96.4)
4.24(107.8)
3.50(88.9)
5.76(146.3)
3.90(99.0)
4.13(105.0)
3.94(100.0)
12.22(310.3)
12.6(5.7)
4(DN100)
4.5(114.3)
5.73(145.5)
4.54(115.4)
4.24(107.8)
4.50(114.3)
6.75(171.5)
3.90(99.0)
4.13(105.0)
3.94(100.0)
13.92(353.5)
15.6(7.1)
139.7(DN125)
5.5(139.7)
6.54(166.0)
5.21(132.4)
5.79(147.0)
5.5(139.7)
7.93(201.5)
4.29(109.1)
4.88(123.9)
5.90(150.0)
16.01(406.6)
26.24(11.9)
5(DN125)
5.56(141.3)
6.54(166.0)
5.21(132.4)
5.79(147.0)
5.56(141.3)
7.93(201.5)
4.29(109.1)
4.88(123.9)
5.90(150.0)
16.01(406.6)
26.24(11.9)
DN150 6.5(165.1)
7.07(179.5)
5.21(132.4)
5.79(147.0)
6.5(165.1)
8.45(214.5)
4.29(109.1)
4.88(123.9)
5.90(150.0)
17.07(433.6)
28.7(13.0)
6(DN150)
6.63(168.3)
7.07(179.5)
5.21(132.4)
5.79(147.0)
6.63(168.3)
8.45(214.5)
4.29(109.1)
4.88(123.9)
5.90(150.0)
17.07(433.6)
28.7(13.0)
8(DN200)
8.63(219.1)
8.03(204.0)
5.80(147.4)
5.79(147.0)
8.63(219.1)
16.10(409)
4.29(109.1)
4.88(123.9)
8.86(225.0)
19.02(483.1)
36.37(16.5)
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(BO-G310C)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
DIMENSIONS
BO-G310 BO-G310C
![Page 12: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/12.jpg)
11
Grooved End Butterfly Valve
BO-G310T / BO-G310TC
Nominal Valve Size
Inches (DN)
Pipe OD
Inches (mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
2(DN 50)
2.37(60.3)
3.8(96.4)
10.63(270)
2.85(72.5)
4.90(124.5)
4.92(125)
4.28(108.6)
1.99(50.5) 0 0 10.80
(4.9)
2-1/2(DN65)
2.88(73.0)
3.8(96.4)
11.72(297.8)
3.35(85)
5.5(139.8)
4.92(125)
4.28(108.6)
1.99(50.5) 0 0 13.00
(5.9)
76.1(DN65)
3(76.1)
3.8(96.4)
11.72(297.8)
3.35(85)
5.5(139.8)
4.92(125)
4.28(108.6)
1.99(50.5) 0 0 13.00
(5.9)
3(DN80)
3.5(88.9)
3.8(96.4)
12.22(310.3)
3.58(91)
5.76(146.3)
4.92(125)
4.28(108.6)
1.99(50.5) 0 0 13.89
(6.3)
4(DN100)
4.5(114.3)
4.54(115.4)
13.92(353.5)
4.29(109)
6.75(171.5)
4.92(125)
4.28(108.6)
1.99(50.5) 0 0 17.64
(8.0)
139.7(DN125)
5.5(139.7)
5.83(148)
16(406.6)
5.16(131)
7.93(201.5)
5.91(150)
5.79(147)
2.32(58.9) 0 0 26.24
(11.9)
5(DN125)
5.56(141.3)
5.83(148)
16(406.6)
5.16(131)
7.93(201.5)
5.91(150)
5.79(147)
2.32(58.9) 0 0 26.24
(11.9)
DN150 6.5(165.1)
5.83(148)
17.07(433.6)
5.71(145)
8.44(214.5)
5.91(150)
5.79(147)
2.32(58.9) 0 0 30.42
(13.8)
6(DN150)
6.63(168.3)
5.83(148)
17.07(433.6)
5.71(145)
8.44(214.5)
5.91(150)
5.79(147)
2.32(58.9) 0 0 30.42
(13.8)
8(DN200)
8.63(219.1)
5.24(133)
19.67(499.5)
6.69(170)
9.29(236)
8.86(225)
5.79(147)
2.32(58.9)
5.66(143.7)
1.24(31.4)
47.18(21.4)
10(DN250)
10.75(273)
6.26(159)
22.46(570.5)
7.68(195)
11.1(282)
8.86(225)
8.19(208)
2.91(74)
7.21(183.1)
1.65(41.8)
73.41(33.3)
12(DN300)
12.75(323.9)
6.5(165)
25.39(645)
9.5(241.5)
12.2(310)
8.86(225)
8.19(208)
2.91(74)
9.96(252.9)
2.7(68.5)
89.29(40.5)
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing
• BODY TAPPING BOSS
3/8”, 1/2”(NPT or PT) Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(BO-G310TC)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
DIMENSIONS
Fire Safety Valves
BO-G310T BO-G310TC
![Page 13: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/13.jpg)
12
Grooved End Butterfly Valve
BO-G300 / BO-G300C
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, Segmented gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(BO-G300C)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
2-1/2(DN65)
2.88(73.0)
3.8(96.4)
12.69(322.3)
5.39(137)
4.92(125)
2.88(73.0)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
76.1(DN65)
3(76.1)
3.8(96.4)
12.69(322.3)
5.39(137)
4.92(125)
3(76.1)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
3(DN80)
3.5(88.9)
3.8(96.4)
13.18(334.8)
5.67(144)
4.92(125)
3.50(88.9)
5.51(140)
6.61(168) 0 0 20.9
(9.5)
4(DN100)
4.5(114.3)
4.54(115.4)
14.88(378)
6.97(177)
4.92(125)
4.50(114.3)
5.51(140)
6.61(168) 0 0 24.20
(11.0)
139.7(DN125)
5.5(139.7)
5.21(132.4)
16.57(421)
7.80(198)
8.86(225)
5.5(139.7)
5.51(140)
8.19(208) 0 0 31.97
(14.5)
5(DN125)
5.56(141.3)
5.21(132.4)
16.57(421)
7.80(198)
8.86(225)
5.56(141.3)
5.51(140)
8.19(208) 0 0 31.97
(14.5)
DN150 6.5(165.1)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
6.5(165.1)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
6(DN150)
6.63(168.3)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
6.63(168.3)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
8(DN200)
8.63(219.1)
5.80(147.4)
19.61(498)
9.29(236)
8.86(225)
8.63(219.1)
5.51(140)
8.19(208)
5.66(143.7)
0.95(24.2)
49.5(22.5)
DIMENSIONS
BO-G300
![Page 14: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/14.jpg)
13
Grooved End Butterfly Valve
BO-G300T, BO-G300TC
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, Segmented gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
• BODY TAPPING BOSS
3/8", 1/2"(NPT or PT)
OPTION
• SUPERVISED CLOSED TYPE(BO-G300TC)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
2-1/2(DN65)
2.88(73.0)
3.8(96.4)
12.69(323.3)
5.39(137)
4.92(125)
2.88(73.0)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
76.1(DN65)
3(76.1)
3.8(96.4)
12.69(323.3)
5.39(137)
4.92(125)
3(76.1)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
3(DN80)
3.5(88.9)
3.8(96.4)
13.18(334.8)
5.67(144)
4.92(125)
3.50(88.9)
5.51(140)
6.61(168) 0 0 20.9
(9.5)
4(DN100)
4.5(114.3)
4.54(115.4)
14.88(378)
6.97(177)
4.92(125)
4.50(114.3)
5.51(140)
6.61(168) 0 0 24.20
(11.0)
139.7(DN125)
5.5(139.7)
5.21(132.4)
16.57(421)
7.80(198)
8.86(225)
5.5(139.7)
5.51(140)
8.19(208) 0 0 31.97
(14.5)
5(DN125)
5.56(141.3)
5.21(132.4)
16.57(421)
7.80(198)
8.86(225)
5.56(141.3)
5.51(140)
8.19(208) 0 0 31.97
(14.5)
DN150 6.5(165.1)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
6.5(165.1)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
6(DN150)
6.63(168.3)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
6.63(168.3)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
8(DN200)
8.63(219.1)
5.80(147.4)
17.64(448)
9.29(236)
8.86(225)
8.63(219.1)
5.51(140)
8.19(208)
5.66(143.7)
0.95(24.2)
49.5(22.5)
DIMENSIONS
Fire Safety Valves
BO-G300T
![Page 15: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/15.jpg)
14
Grooved End Butterfly Valve
BVG1
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm)
A B C D E F G H I
2-1/2(DN65)
2.88(73.0)
4.15(105.5)
3.8(96.4)
4.24(107.8)
2.88(73.0)
5.16(131)
3.90(99.0)
4.13(105.0)
3.94(100.0)
11.38(289)
76.1(DN65)
3(76.1)
4.15(105.5)
3.8(96.4)
4.24(107.8)
3(76.1)
5.16(131)
3.90(99.0)
4.13(105.0)
3.94(100.0)
11.38(289)
3(DN80)
3.5(88.9)
4.43(112.5)
3.8(96.4)
4.24(107.8)
3.50(88.9)
5.43(138)
3.90(99.0)
4.13(105.0)
3.94(100.0)
11.93(303)
4(DN100)
4.5(114.3)
5.73(145.5)
4.54(115.4)
4.24(107.8)
4.50(114.3)
6.73(171)
3.90(99.0)
4.13(105.0)
3.94(100.0)
13.86(352)
DN150 6.5(165.1)
7.07(179.5)
5.21(132.4)
5.79(147.0)
6.5(165.1)
8.19(208)
4.29(109.1)
4.88(123.9)
5.90(150.0)
17.05(433.1)
6(DN150)
6.63(168.3)
7.07(179.5)
5.21(132.4)
5.79(147.0)
6.63(168.3)
8.19(208)
4.29(109.1)
4.88(123.9)
5.90(150.0)
17.05(433.1)
DIMENSIONS
BVG1
![Page 16: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/16.jpg)
15
Fire Safety Valves
Grooved End Butterfly Valve
BO-G
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, Segmented gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2-1/2(DN65)
2.88(73.0)
3.8(96.4)
12.69(322.3)
5.39(137)
4.92(125)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
76.1(DN65)
3(76.1)
3.8(96.4)
12.69(322.3)
5.39(137)
4.92(125)
5.51(140)
6.61(168) 0 0 19.14
(8.7)
3(DN80)
3.5(88.9)
3.8(96.4)
13.18(334.8)
5.67(144)
4.92(125)
5.51(140)
6.61(168) 0 0 20.9
(9.5)
4(DN100)
4.5(114.3)
4.54(115.4)
14.88(378)
6.97(177)
4.92(125)
5.51(140)
6.61(168) 0 0 24.20
(11.0)
DN150 6.5(165.1)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
6(DN150)
6.63(168.3)
5.21(132.4)
17.64(448)
8.31(211)
8.86(225)
5.51(140)
8.19(208)
2.42(61.5)
0.27(6.8)
35.64(16.2)
8(DN200)
8.63(219.1)
5.80(147.4)
19.61(498)
9.29(236)
8.86(225)
5.51(140)
8.19(208)
5.66(143.7)
0.95(24.2)
49.50(22.5)
10(DN250)
10.75(273)
6.26(159)
22.40(569)
11.10(282)
11.14(283)
5.51(140)
8.19(208)
7.20(183)
1.65(41.8)
73.41(33.3)
12(DN300)
12.75(323.9)
6.50(165)
25.39(645)
12.2(310)
11.14(283)
5.51(140)
8.19(208)
9.96(252.9)
2.7(68.5)
89.29(40.5)
DIMENSIONS
BO-G
![Page 17: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/17.jpg)
16
Grooved End Butterfly Valve
BO-GT / BO-GTC
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, Segmented gearbox with internal dual switch in ductile iron housing
• BODY TAPPING BOSS 3/8", 1/2"(NPT or PT) Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
10(DN250)
10.75(273)
6.26(159)
22.40(569)
11.10(282)
11.14(283)
10.75(273)
5.51(140)
8.19(208)
1.65(41.8)
7.21(183.1)
73.41(33.3)
DIMENSIONS
BO-GT
OPTION
• SUPERVISED CLOSED TYPE(BO-GTC)
Hand Wheel Black Color
![Page 18: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/18.jpg)
17
Grooved End Butterfly Valve
BV-G
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDM
Nominal Valve Size
Inches (DN)
Pipe OD Inches
(mm)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2-1/2(DN65)
2.88(73.0)
3.80(96.4) 0 5.31
(135)4.92(125)
5.47(139)
5.91(150)
5.31(135)
12.48(317)
18.04(8.2)
76.1(DN65)
3(76.1)
3.80(96.4) 0 5.31
(135)4.92(125)
5.47(139)
5.91(150)
5.31(135)
12.48(317)
18.04(8.2)
3(DN80)
3.5(88.9)
3.80(96.4) 0 5.59
(142)4.92(125)
5.47(139)
5.91(150)
5.31(135)
13.03(331)
19.8(9.0)
4(DN100)
4.5(114.3)
4.54(115.4) 0 6.89
(175)4.92(125)
5.47(139)
5.91(150)
5.31(135)
14.80(376)
23.54(10.7)
139.7(DN125)
5.5(139.7)
5.21(132.4) 0 7.72
(196)8.86(225)
5.47(139)
5.91(150)
7.60(193)
17.17(436)
29.26(13.3)
5(DN125)
5.56(141.3)
5.21(132.4) 0 7.72
(196)8.86(225)
5.47(139)
5.91(150)
7.60(193)
17.17(436)
29.26(13.3)
DN150 6.5(165.1)
5.21(132.4)
0.27(6.8)
8.27(210)
8.86(225)
5.47(139)
5.91(150)
7.60(193)
19.13(486)
33.44(15.2)
6(DN150)
6.63(168.3)
5.21(132.4)
0.27(6.8)
8.27(210)
8.86(225)
5.47(139)
5.91(150)
7.60(193)
19.13(486)
33.44(15.2)
8(DN200)
8.63(219.1)
5.80(147.4)
0.95(24.2)
9.21(234)
8.86(225)
5.47(139)
5.91(150)
7.60(193)
19.72(501)
44.88(20.4)
DIMENSIONS
Fire Safety Valves
BV-G
![Page 19: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/19.jpg)
18
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Wafer Style Butterfly Valves in below table are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed.
They are used, for example, as system, sectional and pump water control valves, and are suitable for installation between ANSI Class 125/150 flanges as well as PN10/16 flanges without the need for flange gaskets.
The details of connection should be checked by owner with manufacturer before purchasing.
For applications requiring supervision of the open or closed position of the valve, the Gear Operators for the Models are provided with two sets of factory installed internal switches each having SPDT contacts.
The supervisory switches transfer their electrical contacts when there is movement from the normally open or normally closed disc position during the first two revolutions of the handwheel.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Wafer
Style Butterfly Valves described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. The owner is responsible for
maintaining their fire protection system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
TECHNICAL DATA
ModelApprovals Working
Pressure(psi / bar)
Gearbox Body DiscSuper-visorySwitch
Size
UL ULC FM CE 2-1/2" 3" 4" 5" 6" 8" 10" DN65 DN80 DN100 DN125 DN150 DN200 DN250
HPBOW1 ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
HPBO-W ◯ ◯ ◯ 300 / 20.7 Segment
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM A536
(EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯✽✽ ◯ ◯ ◯ ◯✽ ◯ ◯ ◯✽✽
BOW310 ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯
BO-W300 ◯ ◯ ◯ ◯ 300 / 20.7 Segment
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BO-W250 ◯ ◯ ◯ 250 / 17.2 Segment
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BVW1 ◯ 175 / 12.0 TravellingNut
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
BO-W ◯ 175 / 12.0 Segment
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
BV-W ◯ ◯ ◯ 175 / 12.0 Segment
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Indoor ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
BUTTERFLY VALVE WAFER TYPE
✽ FM only ✽✽ WP : 175 psi
![Page 20: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/20.jpg)
19
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Wafer Style Butterfly Valves in below table are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed.
They are suitable for installation between ANSI Class 125/150 flanges as well as PN10/16 flanges without the need for flange gaskets.
The details of connection should be checked by owner with manufacturer before purchasing.
For applications requiring supervision of the open or closed position of the valve, the Gear Operators for the Models are provided with two sets of factory installed internal switches each having SPDT contacts
The supervisory switches transfer their electrical contacts when there is movement from the normally open or normally closed disc position during the first two revolutions of the handwheel.
ModelApprovals Working
Pressure(psi / bar)
Gearbox Body DiscSuper-visorySwitch
Size
UL ULC FM CE 2-1/2" 3" 4" 5" 6" 8" 10" DN65 DN80 DN100 DN125 DN150 DN200 DN250
HPBOW1C ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
HPBO-WC ◯ ◯ ◯ 300 / 20.7 SegmentDuctile Iron ASTM A536
(PA11 Coated)
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯✽✽ ◯ ◯ ◯ ◯✽ ◯ ◯ ◯✽✽
BOW310C ◯ ◯ ◯ 300 / 20.7 TravellingNut
Ductile Iron ASTM
A536 (EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
BO-W300C ◯ ◯ ◯ ◯ 300 / 20.7 Segment
Ductile Iron ASTM A536
(EPDM Encapsulated)
Al-Bronze, Ni-Cr Plated Outdoor ◯ ◯ ◯ ◯✽ ◯ ◯ ◯ ◯ ◯ ◯✽ ◯ ◯
TECHNICAL DATA
These valves cannot be installed between the fire protection system water source and sprinkler
heads. Intended for use in fire pump test bypass lines only.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Wafer
Style Butterfly Valves described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. The owner is responsible for
maintaining their fire protection system and devices in proper operating condition. Contact the
installing contractor or product manufacturer with any questions.
NOTICE!
WAFER TYPE SUPERVISED CLOSED
✽ FM only ✽✽ WP : 175 psi
![Page 21: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/21.jpg)
20
Wafer Type Butterfly Valve
HPBO-W1 / HPBO-W1C
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(HPBO-W1C)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2”(DN50)
1.50(38)
10.63(270)
2.85(72.5)
4.90(124.5)
4.92(125)
4.28(108.6)
1.99(50.5)
1.4(35.5)
11.46(5.2)
2-1/2(DN65)
1.81(46)
11.67(296.5)
3.35(85)
5.45(138.5)
3.94(100)
4.28(108.6)
1.99(50.5)
1.65(41.9)
13.4(6.1)
3(DN80)
1.81(46)
12.27(311.7)
3.58(91)
5.81(147.7)
3.94(100)
4.28(108.6)
1.99(50.5)
2.34(59.5)
14.77(6.7)
4(DN100)
2.16(55)
13.92(353.5)
4.29(109)
6.75(171.5)
3.94(100)
4.28(108.6)
1.99(50.5)
3.25(82.6)
15.65(7.1)
5(DN125)
2.4(61)
16(406.6)
5.16(131)
7.93(201.5)
5.91(150)
5.79(147)
2.32(58.9)
4(101.6)
26.68(12.1)
6(DN150)
2.4(61)
17.07(433.6)
5.71(145)
8.44(214.5)
5.91(150)
5.79(147)
2.32(58.9)
5.22(132.6)
25.35(11.5)
8(DN200)
3.03(77)
19.02(483.1)
6.69(170)
9.43(239.5)
8.86(225.0)
5.79(147)
2.32(58.9)
7.3(185.4)
31.53(14.3)
DIMENSIONS
HPBO-W1 HPBO-W1C
![Page 22: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/22.jpg)
21
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2(DN50)
1.50(38)
11.59(294.5)
5.16(131)
4.92(125)
0.26(6.5)
5.51(140)
6.61(168)
1.34(34)
13.89(6.3)
2-1/2(DN65)
1.89(48)
10.28(261)
5.98(152)
4.92(125)
0.37(9.5)
5.51(140)
6.61(168)
1.68(42.7)
16.5(7.5)
3(DN80)
1.89(48)
10.83(275)
6.26(159)
4.92(125)
0.63(16)
5.51(140)
6.61(168)
2.39(60.7)
17.6(8.0)
DN80 1.89(48)
10.83(275)
6.26(159)
4.92(125)
0.63(16)
5.51(140)
6.61(168)
2.39(60.7)
17.6(8.0)
4(DN100)
2.20(56)
12.17(309)
6.97(177)
4.92(125)
0.98(25)
5.51(140)
6.61(168)
3.42(86.8)
22.0(10.0)
5(DN125)
2.20(56)
14.96(380)
7.64(194)
8.86(225)
1.25(31.8)
5.51(140)
8.19(208)
4.13(105)
29.54(13.4)
6(DN150)
2.4(61)
16.57(421)
8.31(211)
8.86(225)
1.79(45.4)
5.51(140)
8.19(208)
5.29(134.3)
34.1(15.5)
8(DN200)
2.60(66)
16.93(430)
9.29(236)
8.86(225)
2.70(68.5)
5.51(140)
8.19(208)
7.35(186.6)
44.0(20.0)
DN200 2.60(66)
16.93(430)
9.29(236)
8.86(225)
2.70(68.5)
5.51(140)
8.19(208)
7.35(186.6)
44.0(20.0)
10(DN250)
3.03(77)
23.01(584.5)
11.1(282)
8.86(225)
3.39(86)
5.51(140)
8.19(208)
9.13(231.8)
64.6(29.3)
12(DN300)
3.03(77)
25.16(639)
12.2(310)
8.86(225)
4.49(114)
5.51(140)
8.19(208)
11.53(292.8)
86.42(39.2)
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(HPBO-WC)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 Nylon-11 CoatedDisc ASTM A536 EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
DIMENSIONS
Wafer Type Butterfly Valve
HPBO-W / HPBO-WC
Fire Safety Valves
HPBO-W
![Page 23: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/23.jpg)
22
Wafer Type Butterfly Valve
BO-W310 / BO-W310C
OPTION
• SUPERVISED CLOSED TYPE(BO-W310C)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm)
A B C D E F G H
2-1/2(DN65)
1.81(46)
11.99(304.5)
3.29(83.5)
5.71(145)
3.94(100)
4.28(108.6)
1.99(50.5)
1.68(42.7)
3(DN80)
1.81(46)
12.54(318.5)
3.56(90.5)
5.98(152)
3.94(100)
4.28(108.6)
1.99(50.5)
2.39(60.7)
4(DN100)
2.05(52)
13.88(352.5)
4.19(106.5)
6.69(170)
3.94(100)
4.28(108.6)
1.99(50.5)
3.42(86.8)
5(DN125)
2.20(56)
15.71(399.1)
4.72(120)
6.69(170)
5.91(150)
5.79(147)
2.32(58.9)
4.13(105)
6(DN150)
2.20(56)
17.07(433.6)
5.65(143.5)
8.15(207)
5.91(150)
5.79(147)
2.32(58.9)
5.29(134.3)
DIMENSIONS
BO-W310
![Page 24: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/24.jpg)
23
Wafer Type Butterfly Valve
BO-W300 / BO-W300C
Fire Safety Valves
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
OPTION
• SUPERVISED CLOSED TYPE(BO-W300C)
Hand Wheel Black Color
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2-1/2(DN65)
1.81(46)
10.28(261)
5.98(152)
4.92(125)
0.37(9.5)
5.51(140)
6.61(168)
1.68(42.7)
17.24(7.8)
3(DN80)
1.81(46)
10.83(275)
6.26(159)
4.92(125)
0.63(16)
5.51(140)
6.61(168)
2.39(60.7)
18.52(8.4)
4(DN100)
2.05(52)
12.17(309)
6.97(177)
4.92(125)
0.98(25)
5.51(140)
6.61(168)
3.42(86.8)
19.40(8.8)
5(DN125)
2.20(56)
11.57(294)
7.80(198)
8.86(225)
1.25(31.8)
5.51(140)
8.19(208)
4.13(105)
24.91(11.3)
6(DN150)
2.20(56)
14.96(380)
8.31(211)
8.86(225)
1.79(45.4)
5.51(140)
8.19(208)
5.29(134.3)
28.48(12.9)
8(DN200)
2.36(60)
16.93(430)
9.29(236)
8.86(225)
2.70(68.5)
5.51(140)
8.19(208)
7.35(186.6)
36.82(16.7)
DIMENSIONS
BO-W300
![Page 25: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/25.jpg)
24
Wafer Type Butterfly Valve
BO-W250
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
SPECIFICATIONS
• WORKING PRESSURE 250 psi (17 bar)• MAX. TEST PRESSURE 500 psi (34 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
• GAERBOX
IP 65, bronze traveling nut gearbox with internal dual switch in ductile iron housing Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2(DN50)
1.50(38)
11.59(294.5)
5.16(131)
4.92(125)
0.26(6.5)
5.51(140)
6.61(168)
1.34(34)
13.89(6.3)
2-1/2(DN65)
1.81(46)
10.28(261)
5.98(152)
4.92(125)
0.37(9.5)
5.51(140)
6.61(168)
1.68(42.7)
17.24(7.8)
3(DN80)
1.81(46)
10.83(275)
6.26(159)
4.92(125)
0.63(16)
5.51(140)
6.61(168)
2.39(60.7)
18.52(8.4)
4(DN100)
2.05(52)
12.17(309)
6.97(177)
4.92(125)
0.98(25)
5.51(140)
6.61(168)
3.42(86.8)
19.40(8.8)
5(DN125)
2.20(56)
11.57(294)
7.80(198)
8.86(225)
1.25(31.8)
5.51(140)
8.19(208)
4.13(105)
24.91(11.3)
6(DN150)
2.20(56)
14.96(380)
8.31(211)
8.86(225)
1.79(45.4)
5.51(140)
8.19(208)
5.29(134.3)
28.48(12.9)
8(DN200)
2.36(60)
16.93(430)
9.29(236)
8.86(225)
2.70(68.5)
5.51(140)
8.19(208)
7.35(186.6)
36.82(16.7)
10(DN250)
3.03(77)
23.01(584.5)
11.1(282)
8.86(225)
3.39(86)
5.51(140)
8.19(208)
9.13(231.8)
64.6(29.3)
12(DN300)
3.03(77)
25.16(639)
12.2(310)
8.86(225)
4.49(114)
5.51(140)
8.19(208)
11.53(292.8)
86.42(39.2)
DIMENSIONS
BO-W250
![Page 26: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/26.jpg)
25
Fire Safety Valves
Wafer Type Butterfly Valve
BV-W1
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm)
A B C D E F G H
2-1/2(DN65)
1.81(46)
11.99(304.5)
3.29(83.5)
5.71(145)
3.94(100)
4.28(108.6)
1.99(50.5)
1.68(42.7)
3(DN80)
1.81(46)
12.54(318.5)
3.56(90.5)
5.98(152)
3.94(100)
4.28(108.6)
1.99(50.5)
2.39(60.7)
4(DN100)
2.05(52)
13.88(352.5)
4.19(106.5)
6.69(170)
3.94(100)
4.28(108.6)
1.99(50.5)
3.42(86.8)
6(DN150)
2.20(56)
17.07(433.6)
5.65(143.5)
8.15(207)
5.91(150)
5.79(147)
2.32(5.89)
5.29(134.3)
DIMENSIONS
BV-W1
![Page 27: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/27.jpg)
26
Wafer Type Butterfly Valve
BO-W
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor and Outdoor Use
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H
2-1/2(DN65)
1.81(46)
10.28(261)
5.98(152)
4.92(125)
0.37(9.5)
5.51(140)
6.61(168)
1.68(42.7)
17.24(7.8)
3(DN80)
1.81(46)
10.83(275)
6.26(159)
4.92(125)
0.63(16)
5.51(140)
6.61(168)
2.39(60.7)
18.52(8.4)
4(DN100)
2.05(52)
12.17(309)
6.97(177)
4.92(125)
0.98(25)
5.51(140)
6.61(168)
3.42(86.8)
19.40(8.8)
6(DN150)
2.20(56)
14.96(380)
8.31(211)
8.86(225)
1.79(45.4)
5.51(140)
8.19(208)
5.29(134.3)
28.48(12.9)
8(DN200)
2.36(60)
16.93(430)
9.29(236)
8.86(225)
2.70(68.5)
5.51(140)
8.19(208)
7.35(186.6)
36.82(16.7)
DIMENSIONS
BO-W
![Page 28: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/28.jpg)
27
Fire Safety Valves
Wafer Type Butterfly Valve
BV-W
Nominal Valve Size
Inches (DN)
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G H I
2-1/2(DN65)
1.81(46)
13.54(344)
5.91(150)
4.92(125)
5.47(139)
5.91(150)
5.31(135)
1.68(42.7)
0.37(9.5)
19.36(8.8)
3(DN80)
1.81(46)
14.09(358)
6.18(157)
4.92(125)
5.47(139)
5.91(150)
5.31(135)
2.39(60.7)
0.63(16)
20.46(9.3)
4(DN100)
2.05(52)
15.43(392)
6.89(175)
4.92(125)
5.47(139)
5.91(150)
5.31(135)
3.42(86.8)
0.98(25)
21.56(9.8)
5(DN125)
2.20(56)
16.89(429)
7.87(200)
5.91(150)
5.47(139)
5.91(150)
5.31(135)
4.13(105)
1.25(31.8)
25.96(11.8)
6(DN150)
2.20(56)
18.23(463)
8.23(209)
5.91(150)
5.47(139)
5.91(150)
5.31(135)
5.29(134.3)
1.78(45.3)
28.82(13.1)
8(DN200)
2.36(60)
20.20(513)
9.21(234)
8.86(225)
5.47(139)
8.86(225)
7.60(193)
7.35(186.6)
2.70(68.5)
37.40(17.0)
DIMENSIONS
BV-W
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536 EPDM EncapsulatedDisc Al Bronze Ni-Cr CoatedStem AISI 410Signal Gearbox ASTM A536Hand Wheel ASTM A536O-ring EPDMGasket EPDM
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor use
![Page 29: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/29.jpg)
28
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Model BB-G (Grooved End) / BB-T (Threaded End) Butterfly Valves are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed.
It is used, for example, as system, sectional and pump water control valves.
BB-G has grooved inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems. BB-T has threaded inlet and outlet connections that are suitable for use with threaded end pipe that are listed and approved for fire protection systems as well.
The details of connection should be checked by owner with manufacturer before purchasing.
For applications requiring supervision of the open or closed position of the valve, the Gear Operators for the Model are provided with two sets of factory installed internal switches each having SPDT contacts.
The supervisory switches transfer their electrical contacts when there is movement from the normally open or normally closed disc position during the first two revolutions of the handwheel.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved
End and Threaded End Butterfly Valves described herein must be installed and maintained
in compliance with the manual, as well as with the applicable standards of the National Fire
Protection Association(NFPA), in addition to the standards of any other authorities having
jurisdiction.
Failure to do so may impair the performance of these devices. The owner is responsible for
maintaining their fire protection system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
TECHNICAL DATA
ModelApprovals Working
Pressure(psi / bar)
Body DiscSuper-visorySwitch
Size
UL ULC FM CE 1" 1-1/4" 1-1/2" 2" 2-1/2"
BB-G ◯ ◯ ◯ 175 / 12.0 Brass, BronzeBrass
(EPDM Encapsulated)
Indoor*Outdoor
◯ ◯
BB-T ◯ ◯ ◯ 175 / 12.0 Brass, BronzeBrass
(EPDM Encapsulated)
Indoor*Outdoor
◯ ◯ ◯ ◯ ◯
BRONZE BUTTERFLY VALVE
※ Under Process
![Page 30: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/30.jpg)
29
Nominal Valve SizeInches (DN)
PipeOD
Inches
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E
1 1.32 1.72(43.7)
1.56(39.7)
2.13(54.0)
2.05(52.0)
1.46(37.0)
3.301.5
1-1/4 1.66 2.09(53.2)
1.93(49.0)
2.64(67.0)
2.20(56.0)
1.61(41.0)
3.741.7
1-1/2 1.90 2.30(58.5)
2.20 (56.0)
2.87(73.0)
2.32(59.0)
1.73(44.0)
3.961.8
2 2.38 2.99(76.0)
2.76(70.0)
3.24(82.4)
2.52(64.0)
1.93(49.0)
5.282.4
2-1/2 2.88 3.50(89.0)
3.31(84.0)
4.09(104)
2.56(65.0)
1.97(50.0)
6.623.1
Bronze Butterfly Valve
BB-T
Fire Safety Valves
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor / *outdoor use
DIMENSIONS
BB-T
MATERIAL SPECIFICATIONS
Component MaterialBody Brass, BronzeDisc Bronze EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A619Hand Wheel ASTM A619O-ring EPDMGasket EPDM
* Under Process
![Page 31: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/31.jpg)
30
Bronze Butterfly Valve
BB-G
MATERIAL SPECIFICATIONS
Component MaterialBody Brass, BronzeDisc Bronze EPDM EncapsulatedStem AISI 410Signal Gearbox ASTM A619Hand Wheel ASTM A619O-ring EPDMGasket EPDM
SPECIFICATIONS
• WORKING PRESSURE 175 psi (12 bar)• MAX. TEST PRESSURE 350 psi (24 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Factory Installed UL Approved Tempered Switch for Indoor/ *Outdoor use
※ Under process
Nominal Valve Size
Inches (DN)
PipeOD
Inches
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F G
2 2.38 4.49(114)
2.37(60.3)
2.25(57.1)
0.62(15.8)
0.31(7.9)
1.97(50.0)
2.56(65)
4.84(2.2)
2-1/2 2.88 4.49(114)
2.87(73.0)
2.72(69.0)
0.62(15.8)
0.31(7.9)
1.97(50.0)
2.56(65)
5.28(2.4)
DIMENSIONS
BB-G
![Page 32: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/32.jpg)
31
SWING CHECK VALVE
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Model SCV Grooved End Swing Check Valve is compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
The Model SCV Check Valves is designed to minimize water hammer caused by flow reversal.
The Model SCV Grooved End Swing Check Valve is furnished with grooved ends and can be installed using Grooved Couplings or Flange Adapters.
This valve can be installed horizontally or vertically with the flow in the upward direction as well.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Model SCV Grooved
End Swing Check Valve described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. Never remove any piping
component nor correct or modify any piping deficiencies without first de-pressurizing and
draining the system.
Failure to do so may result in serious personal injury, property damage, and/or impaired device
performance.
The owner is responsible for maintaining their fire protection system and devices in proper
operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
TECHNICAL DATA
ModelApprovals Working
Pressure(psi / bar)
Body Seat Ring Clapper Rubber RingSpring /
Hinge Pin
Super-visorySwitch
Size
UL ULC FM CE 2" 2-1/2" 3" 4" 6"
SCV ◯ ◯ ◯ 300 / 20.7Ductile Iron ASTM 536
(PA11 Coated)
BrassASTM C37700
Stainless SteelASTM A-240-
304EPDM
Stainless SteelASTM A-240-
304Outdoor ◯ ◯ ◯ ◯ ◯
![Page 33: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/33.jpg)
32
Grooved End Swing Check Valve
SCV
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536Seat Ring Brass(ASTM C37700)Clapper ASTM A240Rubber Ring EPDMSpring ASTM A240Hinge Pin ASTM A240
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃)
Install in Both Horizontal or Vertical Position
* Tapping bolted Possible NPT/PT
Nominal Valve Size
Inches (DN)
PipeOD
Inches
Nominal Dimensions Inches (mm) WeightLbs.(kg)A B C D E F
2(DN50)
2.37(60.3)
6.34(161.0)
3.54(90.0)
2.80(71.0)
5.02(127.5)
2.37(60.3)
4.21(107.0)
6.24(2.83)
2-1/2(DN65)
2.88(73.0)
7.06(179.4)
3.91(99.4)
3.19(81.0)
5.71(145.1)
2.87(73.0)
4.74(120.3)
8.80(4.00)
76.1(DN65)
3(76.1)
7.06(179.4)
3.91(99.4)
3.19(81.0)
5.71(145.1)
2.87(73.0)
4.74(120.3)
8.80(4.00)
3(DN80)
3.5(88.9)
7.80(198.0)
4.29(109.0)
3.61(91.6)
6.44(163.6)
3.5(88.9)
5.24(133.0)
13.23(6.00)
4(DN100)
4.5(114.3)
8.62(218.9)
4.06(103.1)
4.25(108.0)
7.71(195.9)
4.50(114.3)
6.49(164.8)
19.84(9.00)
DN150 6.5(165.1)
6.63(168.3)
5.12(130.0)
5.43(137.9)
9.56(242.9)
6.63(168.3)
8.00(203.2)
37.48(17.00)
6(DN150)
6.63(168.3)
6.63(168.3)
5.12(130.0)
5.43(137.9)
9.56(242.9)
6.63(168.3)
8.00(203.2)
37.48(17.00)
DIMENSIONS
SCV
![Page 34: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/34.jpg)
33
SHOTGUN VALVE(RISER CHECK VALVE)
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Model RCV Grooved End Shotgun Valve is compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
The Model RCV Check Valves is designed to minimize water hammer caused by flow reversal.
The Model RCV Grooved End Swing Check Valve is furnished with grooved ends and can be installed using Grooved Couplings or Flange Adapters.
This valve can be installed horizontally or vertically with the flow in the upward direction as well.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Model RCV Grooved
End Shotgun Valve described herein must be installed and maintained in compliance with the
manual, as well as with the applicable standards of the National Fire Protection Association(NFPA),
in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices. Never remove any piping
component nor correct or modify any piping deficiencies without first de-pressurizing and
draining the system.
Failure to do so may result in serious personal injury, property damage, and/or impaired device
performance.
The owner is responsible for maintaining their fire protection system and devices in proper
operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
TECHNICAL DATA
ModelApprovals Working
Pressure(psi / bar)
Body Seat Ring Clapper Rubber RingSpring /
Hinge Pin
Super-visorySwitch
Size
UL ULC FM CE 2" 2-1/2" 3" 4" 6"
RCV ◯ ◯ ◯ 300 / 20.7Ductile Iron ASTM 536
(PA11 Coated)
BrassASTM C37700
Stainless SteelASTM A-240-
304EPDM
Stainless SteelASTM A-240-
304Outdoor ◯ ◯ ◯ ◯ ◯
![Page 35: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/35.jpg)
34
Grooved End Shotgun Valve
RCV
MATERIAL SPECIFICATIONS
Component MaterialBody ASTM A536Seat Ring Brass(ASTM C37700)Clapper ASTM A240Rubber Ring EPDMSpring ASTM A240Hinge Pin ASTM A240
SPECIFICATIONS
• WORKING PRESSURE 300 psi (21 bar)• MAX. TEST PRESSURE 600 psi (42 bar)• TEMPERATURE RANGE ~250℉ (~120℃) Install in Both Horizontal or Vertical Position
* Tapping bolted Possible NPT/PT
Nominal Valve Size
Inches (DN)
PipeOD
Inches
Nominal Dimensions Inches (mm) Piping Connection WeightLbs.(kg)A B C D E F
Pressure GaugeDrain
Inlet Oulet
2(DN50)
2.37(60.3)
6.34(161.0)
3.54(90.0)
2.80(71.0)
5.02(127.5)
2.37(60.3)
4.21(107.0) 1/4” 1/4” 1” 4.92
(2.23)
2-1/2(DN65)
2.88(73.0)
7.06(179.4)
3.91(99.4)
3.19(81.0)
5.71(145.1)
2.87(73.0)
4.74(120.3) 1/4” 1/4” 1-1/4” 7.50
(3.40)
76.1(DN65)
3(76.1)
7.06(179.4)
3.91(99.4)
3.19(81.0)
5.71(145.1)
2.87(73.0)
4.74(120.3) 1/4” 1/4” 1-1/4” 7.50
(3.40)
3(DN80)
3.5(88.9)
7.80(198.0)
4.29(109.0)
3.61(91.6)
6.44(163.6)
3.5(88.9)
5.24(133.0) 1/4” 1/4” 1-1/4” 11.90
(5.40)
4(DN100)
4.5(114.3)
8.62(218.9)
4.06(103.1)
4.25(108.0)
7.71(195.9)
4.50(114.3)
6.49(164.8) 1/4” 1/4” 2” 18.52
(8.40)
DN150 6.5(165.1)
6.63(168.3)
5.12(130.0)
5.43(137.9)
9.56(242.9)
6.63(168.3)
8.00(203.2) 1/4” 1/4” 2” 36.16
(16.40)
6(DN150)
6.63(168.3)
6.63(168.3)
5.12(130.0)
5.43(137.9)
9.56(242.9)
6.63(168.3)
8.00(203.2) 1/4” 1/4” 2” 36.16
(16.40)
DIMENSIONS
RCV
※ The above image is of the complete trimp kit, this product only for the Shotgun Valve※ You must Purchase the Shotgun Valve Trim Kit separately
![Page 36: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/36.jpg)
35
COMMERCIAL VALVEGROOVED END
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models BV-GG and BV-GL Grooved End Commercial Butterfly Valves are indicating type valves designed for use in commercial plumbing systems where a visual indication is required as to whether the valve is open or closed.
They are used, for example, as system, sectional and pump water control valves. They have grooved inlet and outlet connections that are suitable for use with grooved end pipe couplings that are approved for commercial plumbing systems.
The details of connection should be checked by owner with manufacturer before purchasing. For applications requiring supervision of the open or closed position of the valve.
TECHNICAL DATA
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Grooved End
Commercial Butterfly Valves described herein must be installed and maintained in compliance
with the manual, in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices.
The owner is responsible for maintaining their system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
Model TypeWorking Pressure(psi / bar)
Body DiscSuper-visorySwitch
Size
2" 2-1/2" 3" 4" 6" 8" 10"
BV-GG Gear Operating 200 / 13.8 Ductile Iron ASTM 536(Epoxy Powder Coated)
Ductile Iron ASTM 536(EPDM Encapsulated) Indoor ◯ ◯ ◯ ◯ ◯ ◯ ◯
BV-GL Lever Handle 200 / 13.8 Ductile Iron ASTM 536(Epoxy Powder Coated)
Ductile Iron ASTM 536(EPDM Encapsulated) Indoor ◯ ◯ ◯ ◯ ◯ ◯ ◯
![Page 37: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/37.jpg)
36
COMMERCIAL VALVE WAFER TYPE
GENERAL DESCRIPTION
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models BV-WG, 011-WG, BV-WL and 011-WL Wafer Style Butterfly Valves are indicating type valves designed for use in commercial plumbing systems where a visual indication is required as to whether the valve is open or closed.
They are used, for example, as system, sectional and pump water control valves. They have wafer style inlet and outlet connections that are suitable for commercial plumbing systems.
The details of connection should be checked by owner with manufacturer before purchasing. For applications requiring supervision of the open or closed position of the valve.
The SAM CHANG FOUNDRY CO., LTD. & GLOBAL SAFETY PRODUCTS, INC. Models Wafer Style
Commercial Butterfly Valves described herein must be installed and maintained in compliance
with the manual, in addition to the standards of any other authorities having jurisdiction.
Failure to do so may impair the performance of these devices.
The owner is responsible for maintaining their system and devices in proper operating condition.
Contact the installing contractor or product manufacturer with any questions.
NOTICE!
TECHNICAL DATA
Model TypeWorking Pressure(psi / bar)
Body DiscSuper-visorySwitch
Size
2-1/2" 3" 4" 6" 8" 10"
BV-WG Gear Operating 200 / 13.8 Ductile Iron ASTM 536(EPDM Encapsulated) Al-Bronze, Ni-Cr Plated Indoor ◯ ◯ ◯ ◯ ◯ ◯
011-WG Gear Operating 200 / 13.8 Ductile Iron ASTM 536(Epoxy Powder Coated)
Ductile Iron ASTM 536(EPDM Encapsulated) Indoor ◯ ◯ ◯ ◯ ◯ ◯
BV-WL Lever Handle 200 / 13.8 Ductile Iron ASTM 536(EPDM Encapsulated) Al-Bronze, Ni-Cr Plated Indoor ◯ ◯ ◯ ◯ ◯ ◯
011-WL Lever Handle 200 / 13.8 Ductile Iron ASTM 536(Epoxy Powder Coated)
Ductile Iron ASTM 536(EPDM Encapsulated) Indoor ◯ ◯ ◯ ◯ ◯ ◯
![Page 38: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/38.jpg)
37
OIL/SHALE GAS FLOWLINE PRODUCTS
![Page 39: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/39.jpg)
38
Model Size (inch) OD (inch) Lengthe (inch)
Standard
5/8" 1.500 4.00
3/4" 1.625 4.00
7/8" 1.812 4.00
1" 2.187 4.00
1-1/8" 2.375 4.50
Crossover
7/8" x 3/4" 1.812 4.00
1" x 3/4" 2.187 4.00
1" x 7/8" 2.187 4.00
3/4" x 5/8" 1.625 4.00
※ Specifications subject to change without notice.
SUCKER ROD COUPLING
GENERAL DESCRIPTION
Sucker Rod Couplings are an integral part of oilfield operations.
We produce a variety sizes of quality Sucker Rod Couplings to suit your needs.
All Sucker Rod Couplings features a AISI 4140 body and threads rolled to API 11B, Section 8 Sucker Rod Connections.
Whatever your specification, find the one to suit you.
TECHNICAL DATA
![Page 40: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/40.jpg)
39
Model Material ID (inch) Height (inch) Weight (lb)
STC-S (2 Bolts)ASTM A536
Grade 100-70-032.374 2.756 9.88
STC-L (4 Bolts)ASTM A536
Grade 100-70-032.374 4.331 15.79
※ Specifications subject to change without notice.
Oil/Sh
ale Gas Flo
wlin
e Prod
ucts
TUBING CLAMP
GENERAL DESCRIPTION
Tubing Clamps are a part of oilfield flowline operations.
We produce a quality Tubing Clamp to suit your needs. We have two different types of Tubing Clamp to meet field requirements.
Whatever your specification, find the one to suit you.
TECHNICAL DATA
![Page 41: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/41.jpg)
40
Bottom Thread(inch)
Top Thread(inch)
Major SideOutlet (inch)
Bleeder Port(NPT, inch)
Height(inch)
MaterialWorking
Pressure (psi)Weight (lb)
2" 2" 2" 1" 6" Grade 65-45-12 3,000 9
2" Male 2" 2" 1" 7-1/4" Grade 65-45-12 3,000 7
2" 2-1/2" 2" 1" 7-1/4" Grade 65-45-12 3,000 13
2" 3" 3" 1" 8" Grade 65-45-12 3,000 21
2-1/2" 2" 2" 1" 7-1/4" Grade 65-45-12 3,000 13
2-1/2" 2-1/2" 2" 1" 7-1/4" Grade 65-45-12 3,000 13
2-1/2" Male 2-1/2" 2" 1" 8" Grade 65-45-12 3,000 10
2-1/2" 3" 2" 1" 8" Grade 65-45-12 3,000 20
2-1/2" 3" 3" 1" 8" Grade 65-45-12 3,000 18
3" 3" 3" 1" 8" Grade 65-45-12 3,000 18
3" Male 3" 3" 1" 9-1/2" Grade 65-45-12 3,000 19
4" 4" 4" 1" 7-3/4" Grade 65-45-12 3,000 18
※ Specifications subject to change without notice.
PUMPING FLOW TEE
GENERAL DESCRIPTION
Pumping Flow Tees are a part of oilfield flowline operations.
We produce a quality Pumping Flow Tees to suit your needs. We have a variety sizes of quality Pumping Flow Tees to suit your needs.
Whatever your specification, find the one to suit you.
TECHNICAL DATA
![Page 42: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/42.jpg)
41
Model Working Pressure (psi / bar) Body Disc Seat Ring Size
TCV 300 / 20.7 Ductile Iron ASTM 536 Ductile Iron ASTM 536 EPDM
2" 3" 4"
◯
※ Specifications subject to change without notice.
TILTING CHECK VALVE
GENERAL DESCRIPTION
Tilting Check Valves are a part of oilfield flowline operations. We produce a quality Tiling Check Valve to suit your needs.
Whatever your specification, find the one to suit you.
TECHNICAL DATA
Oil/Sh
ale Gas Flo
wlin
e Prod
ucts
![Page 43: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/43.jpg)
42
Fig No.Working
Pressure (psi)Type Use
Color Codes Size
Subs Nut 2" 3" 4"
100 1,000 Thread Yellow Black ◯ ◯ ◯
200 2,000 Thread Gray Blue ◯ ◯ ◯
602 6,000 Thread Orange Black ◯ ◯ ◯
1002 10,000 Thread Blue Red ◯ ◯ ◯
1502 15,000 Thread Red Blue ◯ ◯ ◯
GENERAL DESCRIPTION
We produce a full line of high quality Hammer Unions. We offer a wide range of sizes and working pressure to fit our clients' requirements for oil service and have the fast make-up and break-out capability needed in the oilfields around the world.
It can handle pressure up to 15,000 psi NSCWP with line pipe threads or non-pressure seal thread ends. Our Hammer Unions are interchangeable with other leading manufacturers' unions and are readily available from stock.
Whatever your specification, find the one to suit you.
HAMMER UNION
TECHNICAL DATA
FIG 100 FIG 200
FIG 1002
FIG 602
FIG 1502
![Page 44: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/44.jpg)
43
2" 1502 INTEGRAL PUP JOINT 22,500TP
Oil/Sh
ale Gas Flo
wlin
e Prod
ucts
GENERAL DESCRIPTION
We produce a high quality Pup Joints and they meet API 16C as well. The Pup Joints are one-piece construction made and feature wing union end connections that eliminate welds and threads.
We offer a complete selection of Pup Joints up to 15,000 psi with testing presurre 22,500 psi and are capable of handling a variety of fluids. Our Integral Pup Joints are available in 2" sizes up to 10 feet. Whether your service requirements run from economical oil and gas lines to the most severe abrasive service, you can count on running them through our Pup Joints.
Whatever your specification, find the one to suit you.
PUP JOINT
Part No. Length Weight (lb)
IPJ-2-021502 2 ft. long 31.4
IPJ-2-031502 3 ft. long 40.0
IPJ-2-041502 4 ft. long 48.6
IPJ-2-051502 5 ft. long 57.2
IPJ-2-061502 6 ft. long 65.8
IPJ-2-081502 8 ft. long 83.0
IPJ-2-101502 10 ft. long 100.2
TECHNICAL DATA
![Page 45: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/45.jpg)
44
Pressure RatingSize
Pressure RatingSize
2" 2"
Style 10 - Fig. 1502 M x F ◯ Style 80 - Fig. 1502 M x F ◯
Style 10 - Fig. 1502 M x M ◯ Style 100 - Fig. 1502 M x F ◯
Style 20 - Fig. 1502 M x F ◯ Style 100 - Fig. 1502 M x M ◯
Style 30 - Fig. 1502 M x F ◯ Style 10 - Fig. 1002 M x F ◯
Style 50 - Fig. 1502 M x F ◯ Style 10 - Fig. 1002 M x M ◯
Style 50 - Fig. 1502 F x F ◯ Style 50 - Fig. 1002 M x F ◯
Style 60 - Fig. 1502 M x F ◯ Style 50 - Fig. 1002 M x M ◯
Style 60 - Fig. 1502 M x M ◯ Style 50 - Fig. 1002 F x F ◯
※ Specifications subject to change without notice.
SWIVEL JOINT
GENERAL DESCRIPTION
We produce a high quality Swivel Joints and they meet API 16C as well.
We Provide Swivel joints that range from 1" to 4" and can handle up to 6,000 psi for standard service. Also available are long sweep swivel joints, which are designed to withstand working pressure of 7,500 to 20,000 psi. Long sweep swivel joints for sour service are rated up to 15,000 psi. All swivel joints have three key features, one they are made from heat-treated material to withstand high pressures. Second they have a dual-purpose packing composed of an anti-extrusion ring to reduce friction, and an active seal to prevent the fluid from leaking.
All swivel joints have smooth bore finishes to ensure smooth flow. We offer a complete selection of Swivel joints and are capable of handling a variety of fluids. Our Swivel joints are avaliable in the table below. All swivel joints have smooth bore finishes to ensure smooth flow. Whether your service requirements run from economical oil and gas lines to the most severe abrasive service, you can count on running them through our Swivel joints.
Whatever your specification, find the one to suit you. TECHNICAL DATA
STYLE 10 MXF STYLE 30 MXF STYLE 60 MXF STYLE 100 MXF
STYLE 20 MXF STYLE 50 MXF STYLE 80 MXF
![Page 46: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/46.jpg)
45
Repair Kit
Oil/Sh
ale Gas Flo
wlin
e Prod
ucts
PLUG VALVE
GENERAL DESCRIPTION
We produce a high quality Plug Valves and they meet API 6A and API Q1 as well. We offer a complete selection of Plug Valves up to 15,000 psi with testing presurre 22,500 psi and maintenance are excellent. All valves features a forged alloy body and a long lasting seal to increase service life over the competition. Its parts are interchangeable with most major designs and are readily available from stock. Our Plug Valves are built to meet and exceed the industry's most stringent requirements in severe temperature and pressures. Whatever your specification, find the one to suit you.
Model Size End Con. ServiceWorking Pressure
(psi)
Test Pressure
(psi)
Operation Type
Dimensions (Inch)Weight
(lb)A B C D E
PV2-1002-50A2 x 2
LP Thread Standard 10,000 15,000 Lever 8.5 5.38 5.29 6.88 1.95 76.0
PV2-1502-00A 1502 M x F Standard 15,000 22,500 Lever 13.87 5.38 5.29 6.88 1.95 93.6
TECHNICAL DATA
No. Item Part No. Material Q'ty
1 Plug Seal PV2-1502-19P NBR 2
2 Plug PV2-1502-03M AISI 4140 1
3 Insert PV2-1502-06M AISI 60/40/8 2
4 Insert O-Ring PV2-1502-08P NBR 2
5 Adjusting Nut O-Ring PV2-1502-09P NBR 1
REPAIR KIT COMPOSITION
![Page 47: Your Growth Partner, SAMCHANG](https://reader031.fdocuments.us/reader031/viewer/2022020707/61fd93c4a1587266655a2343/html5/thumbnails/47.jpg)
(22744) 4, Saryeom-ro 32beon-gil, Seo-gu, Incheon, Korea
Tel. +82-32-561-7752
Fax. +82-32-561-1152
Homepage. www.scfcasting.com
970 E. Orangethorpe Ave., Unit B, Anaheim, CA 92801, USA
Tel. +1-714-525-2262
Fax. +1-714-525-2138
Homepage. www.gspvalve.com
Your Growth Partner,
SAMCHANG FOUNDRY CO., LTD.GLOBAL SAFETY PRODUCTS, INC.
Your Grow
th Partner, SAM
CH
AN
Gw
ww
.scfcasting.com