YOUR FLUID CONTROL PARTNER - PACLINE | Valves · FLUID CONTROL DEVICES KLINGER PISTON VALVES •...
Transcript of YOUR FLUID CONTROL PARTNER - PACLINE | Valves · FLUID CONTROL DEVICES KLINGER PISTON VALVES •...
FLUID CONTROL DEVICES
KLINGER PISTON VALVES
• Leak-tight across the ports and to atmosphere• Economic, easy to service (In-line).• Virtually maintenance-free.• No erosion of sealing surfaces.• Saves Energy and Cost.• KVN: Not affected by solid matters in medium.• Cleaning effect of piston• Klinger piston valve: No leakage possible because of larger,
cylindrical sealing surfacesDesign: Standard KX-GT valve ring equipped with additional K-Flon gaskets
• Lowes leakage rates (2ppm)-best sealing performance.• Already installed KVN with standard sealing system could be
easily upgraded with KX1 valve rings.
Available diameter : DN15-200Pressure/Flanging range : PN16-63-ANS1150/300Material : Cast iron, cast steel, acid resistant & stainless cast steelTemperature : 10ºc - 400ºc
Available diameter : 1/4” - 3”Material : BrassTemperature : -30ºc - 150ºc
KLINGER BALL VALVEBALL-O-TOP VN-2000KHEKHA
KLINGER VAPOURLINE
PV.F DTF/TTF IBT KLINGER CONAXE
*ALL VALVES CAN BE ACTUATED HYDRAULICALLY OR PNEUMATICALLY
Available diameter : DN10-DN1000Pressure/Flange : PN6-40-ANS1150/30Material : Cast iron, cast steel, acid resistant & stainless cast steelTemperature : 10ºc - 400ºc
KLINGER LEVEL GAUGES
KLINGER GAUGE GLASSES
• Reflex• Transparent • Circular• Glass tube
REFLEX GAUGE TRANSPARENT GAUGE
BI-COLOURED GAUGE MAGNETIC GAUGE
BRONZE LEVEL GAUGE
KLINGER AB MANOMETER COCK
• Robust shut-off value which is developed for instrumentation services
KLINGER SHUT OFF FITTINGS
• DG cocks• RAV 9461947• D Cocks• DA Cocks• RAV 956/957• DVK2 Valves
KLINGER ACCESSORIES
• LED Illuminator• Anti-Frost block• Microprotective
shields
KLINGER KU16 GLAND RING KLINGER PACKING SLEEVESAB12 & AB18
KLINGER LASTIC CONE
PICTURE NAME APPLICATION MAX TEMPERATURE MAX PRESSURE
Klinger Universal 3XA
Extreme pressure, all media include hydrocarbons, alkalis and medium strength acids.
550‘C, 1022’F 14000(kPa)
Klingerit 3XA Steam, water and non-aggressive solvents and a wide range of chemicals 550‘C, 1022’F 13000(kPa),
Oilit 3XA Petrols, oils, solvents of all types including chlorinated hydrocarbons and aromatics 500 ‘C, 932’F 13000(kPa)
K1000 Extreme pulsating pressure and high temperature. 500‘C, 1022’F 20000(kPa)
K80 Plain/Graphite
Steam, gases, water and non aggrasive media 350 ‘C, 662’F 2500(kPa)
K200 Steam, gases, water and non aggrasive media 400 ‘C, 752’F 4000(kPa)
PICTURE NAME APPLICATION MATERIAL MAX TEMPERATURE MAX PRESSURE
KLINGERSIL C4243
Extreme pressure, all media include hydrocarbons, alkalis and medi-um strength acids.
Organic fibres bound with NBR. 200’C 50 Bar
KLINGERSIL C4400
Steam, water and non-aggressive sol-vents and a wide range of chemicals Aramid fibres bound with NBR. 400’C 65 Bar
KLINGERSIL 4403
General purpose use in oil, water and gases. Excellent alternatives to tradii-tional compressed asbestos fibre
Asbetstos fibre 3XA with anti stick coating on both side 300’c 50 Bar
KLINGERSIL C4430
Petrols, oils, solvents of all types includ-ing chlorinated hydrocarbons and aro-matics
Glass/aramid fibres bound with NBR. 400’C 65 Bar
KLINGERSIL C4500
Extreme pulsating pressure and high temperature.
Carbon fibres + heat resistant additives with NBR. 400’C 65 Bar
KLINGER QUAN-TUM
Steam, gases, water and non aggrasive media
Synthetic fibres bounds in high temperature HNBR matrix. Unique materials
425’C 100 Bar
KLINGERIT PSM Steam, gases, water and non aggrasive media
Pure exfoliated graphite with tanged stainless steel sheet re-inforcement.
460 ‘C (oxidising atmosphere), 3000 ‘C (non-oxidising)
180 Bar,130 Bar (oxygen)
TOP GRAPH 2000Oil, steam, hydrocarbons, oxygen, water applicaton. Ecellent resitant for hot water and steam
Expanded graphite and synthetic fibres 196’c up to 450’c 100 Bar
ASBESTOS
NON-ASBESTOS
Standard Dimensions (m) : 1.5x2.0Standard thickness (mm) : 0.5, 0.75, 1.0, 1.5, 2.0, 3.0, 4.0*Other materials, thickness & sizes on request*Cutting services are available for all sizes*Certain materials can be wire reinforced
Name &Type Picture DESCRIPTION
TEMP (‘C) PRESSURE (Bar)
SPEED (m/s) pH APPLICATION
Min Max
GRA
PHIT
E
STYL
E K3
222
Resistant to chemical attacks, high thermal conductivity & resilience, min gland seal pressure
-200 430 280 20 2-12 High pressure and temperature for valves application, cryogenic application
STYL
E K3
222W Resistant to chemical attacks, high
thermal conductivity & resistant, reinforce with Inconnel wire
-200 430 300 20 4-10 High pressure and temperature for valves application, cryogenic application
PTFE
STYL
E K5
4F Resistant to variety of chemicals, self-lubricate, low friction, non-contaminated packings
-240 260 200 - 2-12Wide range of media include strong acids & alkalis, oxygen(valves), water & food applications
STYL
E K5
4S Resistant to variety of chemicals, self-lubricate, low friction, non-contaminated packings
-240 280 200 1.5 - Wide range of media include strong acids & alkalis, water & food applications
STYL
E K5
5 Resistant to variety of chemicals, self-lubricate, low friction, non-contaminated packings
-200 280 250 20 - General valves and pumps application. Water, Mild acids, alkalis and slurries
SYN
THET
IC F
IBRE
STYL
E K1
0 Resistant to variety of chemicals. Graphite lubricant. Only affected by very (molten alkali metals)
-100 260
100 Bar (static), 30 Bar
(dynamic)
10 0-14 General valves and pumps application. Water, Mild acids, alkalis and slurries
STYL
E K1
1 Combination of acrylic yarn and graphite. Enhanced chemical resistant. Low friction
-100 300
100 Bar (static), 40 Bar
(dynamic)
15 0-14
General valves and pumps application. Water, Mild acids, alkalis and slurries. Suitable when non-contaminating packing is not important
Standard Dimensions (mm) : 3.2, 5.0, 6.5, 8.0, 9.5, 11.0, 12.5, 14.0, 16.0, 19.0, 22.0, 25.0 (square shape)Standard Length (m) : 8*Other materials are available, please consult us if requiredSEMI METALLIC GASKET
KLINGER SPIRAL WOUND GASKET
TYPER: CR TYPER: CRIR
METALLIC GASKET
Available in style :• R oval (flat & round bottom flang-
es) and octagonal (bottom groove flanges). Interchangeable
• RX (flat bottom groove flanges). Interchangeable with style R
• BX (only suited for API 6BX flanges)
KLINGER SEALEX
• Sealing on a roll
KLINGER INSULATION SETS
Klinger ISOMAX HPS, HPSFKlinger Flange insulator
• Type E (Full face gasket)• Type F (Ring gasket)• Type D (Ring join gasket)
• Klinger LPS (economical set, electrical flange isolation, general application)
GLAND PACKING
KLINGER KAMPROFILE
GLOBE VALVE
BALL VALVE BUTTERFLY VALVECHECK VALVE
CONTROL VALVE GATE VALVE
SAFETY VALVE
PLUG VALVE
• All P.Rating available: • DIN, ANSI, JIS• Materials: • Cast iron, cast steel, stainless steel,
bronze• Connection:• Flanged end, Butt weld, BSP screwed end
GESTRA BLOWDOWN VALVE ZETKAMA BS GLOBE VALVE ZETKAMA SAFETY VALVE
DIRECT ACTING SOLENOID VALVE
ASSISTED- SOLENOID VALVE
PISTON SOLENOIDVALVE
MANIFOLD BLOCKSOLENOID VALVE
OTHERS
PICTURE NAME APPLICATION MATERIAL MAX TEMPERATURE
MAX PRESSURE
TEMAFAST ECONOMY
Wide range of applications throughout various types of industries at lower parameters
Mixture of organic fibres with NBR/SBR rub-ber binder
210 (peak)140 (continual) 50 Bar
TEMASIL NG
Wide range of industries such as petrochemical, chemical, food and oil as well as engineering area regardful of environment
Blend of special temperature resisting fibres and other agents with NBR. Easy to cut due to its flexibility and smooth surface. Also available in wire insertion reinforced sheets ( NG metallic)
400 (peak)250 (continual)
200 (steam) 100 Bar
TEMASIL HT
Due to its hogh quality material, this grade is used in petrochemical, chemical and food industries, wide area of machinery. Suitable also for oils, fuels, lubricants, alcohol, gases, hydrocarbons, water, cooling liquids, and most diluted acids and alkalis
Blend of special heat resistant aramid fibre and high quality nitrile rubber binder. Suitable for elevated temperature and steam applications with excellent gas sealability. Superior performance
450 (peak)330 (continual)
250 (steam) 120 Bar
GRAFTEM
Non-asbestos gasking sheet that combines graphite powder reinforced with aramid fibres and low content of rubber binder system. Available also in economy version on request. Has excellent mechanical properties
Suitable for fuel, oil, coolants, hydrocarbons, gas and steam
350 (peak)250 (continual)
220 (steam) 100 Bar
TEMASIL TITAN
Unique jointing sheet material based upon HNBR binding system. Formulated using highest quality ingredients to ensure outstanding properties
For high temperature applications. Also suit-able for oil, fuel, steam, gas, water, hydro-carbons, solutions of organic and anorganic acids, refrigerants as well as lubricant
450 (peak)400 (continual)
350 (steam) 130 Bar
TEMA-GRAPH TI
Graphite laminate product reinforced with one or more tanged metallic insertions. Reliable long term service. No of insertion (pc) = 1 and more
Designed to be used in demanding applica-tion. Largely Aused in flanged connections for piping, vessels and other machinery. Suitable for steam systems and process duties in the chemical, petrochemical, power and manufacturing industries.
From -200 to +500 140 Bar
TYPE DESCRIPTIONTEMP (‘C) PRESSURE (Bar) SPEED (m/s)
pH APPLICATIONmin max Centrifugal
pumppiston pump armatura Centrifugal Piston
ACR
YLIC 22
10 With PTFE impregnation-50 +180 20 20 80 10 2 2-12 Weak acids, water, foodstuff,
solvents
2230 With graphite- tallow
impregnation -10 +180 20 20 50 8 1.5 4-10 Oils, steam, solvents, neutral solutions
ARA-
MID
3300 Aramid staple yarn + PTFE
impregnation + silicon oil -100 +280 25 100 100 20 1.5 2-12 Inert gases, oils, abrasive medium, solvents
PTFE
5100 With PTFE impregnation
only -200 +280 - 150 250 - - 0-14 drinking water, chemistry,
5110 Pure washed yarn with
PTFE impregnation -200 +280 - 150 250 - - 0-14 sugar refinery, papermill
EXPA
NDE
D GR
APHI
TE
6200
With PTFE impregnation
-200 +280 20 100 300 20 2 0-14 especially for oxygen, foodstuff, pharmacy, aggressive chemis
Standard Dimensions (m) : 1.5 x 1.5Standard Thickness (mm) : 0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0*Other materials, thickness & sizes on request*Cutting services available for all sizes*Certain materials can be wire reinforced
Standard Dimensions (mm) : 3, 4 , 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 25 (square shaped)Standard Length (m) : 8*Other materials are available, please consult us if required
NON-ASBESTOS
GLAND PACKING