PORTABLE MEASURING INSTRUMENTS

אא

15

15-50

WAVEFORM MEASURING INSTRUMENTS

Digital Oscilloscopes Digital Oscilloscopes DL 1540 • Full range 4-channel input • Maximum of 200 MS/s (8 bits) • Large memory capacity: Maximum of

120 kwords • 150 MHz analog bandwidth • Compact (base area smaller than A4

paper size) and lightweight (approx. 5 kg)

• Built-in printer (optional) Digital Oscilloscopes DL 1540L • Full range 4-channel input • Maximum of 200 MS/s (8 bits) • Large memory capacity: Maximum of

2 Mword • 150 MHz analog bandwidth • Compact (base area smaller than A4

paper size) and lightweight (approx. 6 kg)

• Built-in printer (optional) Digital Oscilloscope DL 1520 • Full range 2-channel input • Maximum of 200 MS/s (8 bits) • Large memory capacity: Maximum of

20 kwords (in roll mode) • 150 MHz analog bandwid • Compact (base area smaller than A4

paper size) and lightweight (approx. 6 kg)

• Built-in printer (optional) • With Centronics function (output to

remote printer available, for specific model of DL1520 only)

Digital Oscilloscope DL 1520L • Full range 2-channel input • Maximum of 200 MS/s (8 bits) • Large memory capacity: Maximum of

1 Mwords (in roll mode) • 150 MHz analog bandwid • Compact (base area smaller than A4

paper size) and lightweight (approx. 6 kg)

• Built-in printer (optional)

Isolator Isolator 700926 • Number of input channels: 2 • Frequency response: DC to 30MHz (-

3 dB point) • Internal low-pas filter: off/4 kHz/400

Hz/40Hz • DC accuracy: ±(2% of 8 div + offset Voltage accuracy) after being combined

with the DL 1540 or DL1540L and calibrated

Digital Oscilloscopes Digital Oscilloscopes DL2700 • Large memory capacity: maximum of

4Mwords • Input of up to 8 channels • Max. sampling rate of 500 MS/s • 8.4 TFT color LCD • Built-in printer (optional) • Logic probe input unit (optional) • User-set computation (optional) • Built-in 3.5-inch floppy disk drive Digital Oscilloscopes DL4100 • Vertical axis resolution: 10 bits • High accuracy: ±1% • Simultaneous 4-channel sampling:

100 MS/s sampling rate (150 MHz bandwidth)

• High-speed realtime signal processing

• Full range 4-channel input • Standard 3.5-inch floppy disk drive • Built-in printer (optional) Digital Oscilloscope DL4200 • Vertical axis resolution: 10 bits • High accuracy: ±1% • Simultaneous 4-channel sampling:

100 MS/s sampling rate (300 MHz bandwidth)

• Large memory capcity: 100 kwords/channel

• High-speed realtime signal processing

• Full range 4-channel input • Standard 3.5 inch floppy disk drive • Built-in printer (optional) Digital Oscilloscope DL5140 (4 ch.)/DL5180 (8 ch.) • Simultaneous 8-channel sampling: up

to 1 GS/s (500 MHz bandwidth) • History memory of 120 blocks per

channel • 640 by 480 dots TFT color LCD in

high resolution • Color accumulation function • Standard 3.5-inch floppy disk drive • Built-in printer (optional)

Digital Oscilloscopes DL3100B • High resolution: 12 bis • Simultaneous 2-channel sampling: 25

MS/s • Large memory capacity: total of 1

Mwords (optional) • Powerful trigger functions and high-

speed computation function (e.g., FFT)

• High sensitivity, differential input • Built-in printer (optional)

PORTABLE MEASURING INSTRUMENTS

אא

15

15-51

Digital Scopes Digital Scopes DL708 • Plug-in 8-input unit • Max. record length:

400 kwords (standard) 4 Mwords (1 Mwords/ch model) 8 Mwords (2 Mwords/ch model) 16 Mwords (4 Mwords/ch model)

• 10.4 TFT color LCD • Standard built-in printer, 3.5-inch

floppy disk drive, GP-IB, RS-232C, Centronics interface, VGA

• 1.2 GB hard disk drive (optional) • Compact and lightweight, approx. 6.8 kg (including 8-channel, high-speed

isolation module). DL708 Specifications Horizontal • Sweep time: 500 ns/div to 100000 s/div Trigger • Mode : Auto/auto-level/normal • Type: Edge/event/pattern/A —> B (n) A delay B/Edge on A/Pluse width/B> Time/ B<Time/B Time out/Window/OR General Specifications • External dimensions • Approx. 396 (W) x 260 (H) x 175 (D) mm excluding knobs and protrusions) • Weight: approx. 6.8 kg (including 8-channel, high-speed isolation module) Digital Scopes DL708 Input Plug-in Module • High Speed isolation module (701850) • Number of input channel: 1 • Input coupling: DC/AC/GND • Vertical resolution: 10 bits (A/D resolution)

Maximum of 14 bits (in executing “box” averaging or averaging) • High-speed sampling rate: 10 MS/s • Frequency band (-3 dB): DC to 2 MHz • Max. input voltage: 850 V (DC + C peak)

for combination with dedicated 700926 probe Between probe tips H and L 250 V (DC + AC peak) between signals H and L

• Input impedance: 1 MΩ±1% • Input connector: isolated BNC connector • Input filter: off/500kHz High speed module (701851) • Number of input channels: 1 • Input coupling: DC/AC/GND • Vertical resolution: 10 bits (A/D resolution)

Maximum of 14 bits (in executing “box averaging or averaging) • High speed sampling rate: 10 MS/s • Frequency band (-3 dB): DC to 8 MHz • Max. input voltage: 250V (DC + AC peak) • Input impedance: 1MΩ±1% • Input connector: BNC connector • Input filter: Off/5 MHz/500 kHz.

Signal Analyzer Realtime Signal Analyzer SA2400 • High speed, realtime processing FFT

analyzer • High resolution of 16 bits, measuring band

400 kHz. • Realtime measuring band 25 kHz (at 1-

channel operation) • Isolated, differential two-channel input • Servo analysis function and octave analysis

function • Built-in printer (Standard)

Analyzing Recorder AR1200 • Standard 3.5-inch floppy disk drive/

memory card slot • Wide input selection: isolated 4, 6, or

8-channel input • Programmed computation, zone statis-

tical computation, FFT analysis (optional), and waveform go/no-go functions

• Large memory capacity: maximum of

Analyzing recorder