GSPublisherVersion 945.57.78.19

CONTENTS

SITE PLANEXISTING FLOOR PLANGROUND FLOOR PLANELEVATIONS3D VIEWS3D VIEWS3D VIEWS3D VIEWS

DWG

DA - 01DA - 02DA - 03DA - 04DA - 05DA - 06DA - 07DA - 08

JOB 2027DATE 12/03/2021

64 THE MAIN BRACE, YAMBA, NSW

YAMBA SHORES TAVERN

DEVELOPMENT APPLICATION

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488570 Casuarina Way

Casuarina Beach NSW 2487

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: 1:1000 (@A3)© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 01

570 Casuarina WayCasuarina Beach NSW 2487

SITE PLAN

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

R 2,549

R 8,999

Yamba Shores Tavern

New - Alfresco seating area

Yamba Shores Tavern

New - Landscape areaArea = 70m2

Area = 52m2

Proposed New - Alfresco seating area

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: NTS© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 02

570 Casuarina WayCasuarina Beach NSW 2487

GROUND FLOOR PLAN

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

1 2 3 4 5 6 7 8 9

10

EXIT

PROPOSED NEW SEATING AREA

PROPOSED NEW LANDSCAPE AREA

PROP

OSED

NEW

LAND

SCAP

E AR

EA

EXISTING CARPARK

EXISTING TURNING AREA

EXISTING TURNING AREA

EXISTING CARPARK

EXISTING RAISED GARDEN BED

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: 1:100 (@A3)© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 03

570 Casuarina WayCasuarina Beach NSW 2487

GROUND FLOOR PLAN

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

Raised DeckOutdoor Seating Area

Bench

CarpetExisting Tavern

Fire ExitSkylight Skylight Skylight

Skyli

ght

Skyli

ght

Skyli

ght

RelocateFHR

Skyli

ght

Skylight

TV

Benc

h

Bench

Paving

Existing

laybac

k kerb

Existing

laybac

k kerb

Existing layback k

erb

2,6933502,6409,061

6,004

1,719

5601902,2924,6212,394

1,534

560

1,920

190

4,029

2,394

2,598

190

185190

185 2,420560

R 2,549

R 8,999

W

S

Raised Garden Bed

Raised Garden Bed

Exisitng compresser room

Mesh

Mesh

1.1m handrail

1.1m handrail

1.1m

hand

rail

1.1m

hand

rail

New

retai

ning w

all

New reatining wall

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: 1:100 (@A3)© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 04

570 Casuarina WayCasuarina Beach NSW 2487

ELEVATIONS

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

2,400

488

2,888

Relocated FHR

New - Whirly birds

New - ventilated skylighs

Existing Greenboard bulkhead

Existing Column

New - Aluminium framed double fire exit doors clad with FCsheeting painted with 70x45 feature battens

70x45 feature battens fixed to masonry block wall

200 series masonry block wall with smotth render and paint finish

New - NRG greenboard roof covering exit doors

Existing Gutter

Existing wall

Existing raised garden bed

70x45 feature battens fixed to masonry block wall

Exisitng masonry block wall

Existing stairsNew - Raised garden bed. 200 series masonry block wallwith smotth render and paint finish

New - opening under blockwork for drainage

Exisitng masonry block wall

Existing Ground Floor Level

GF Joinery HeadPitching Point

Exisitng Roof

Exisitng Roof

FHR

2,400

488

2,888

535

1,800

380

Existing fence

New - Whirly birds

New - ventilated skylighs

Existing Greenboard bulkhead

70x45 feature battens fixed to masonry block wall

200 series masonry block wall with smotth render and paint finish

New - NRG greenboard roof covering exit doorsExisting Gutter

Existing wall

70x45 feature battens fixed to masonry block wall

New - Raised garden bed. 200 series masonry block wallwith smotth render and paint finish

Exisitng masonry block wall

70x45 feature battens fixed to masonry block wall

200 series masonry block wall with smotth render and paint finish

Existing Ground Floor Level

GF Joinery HeadPitching Point

Exisitng Roof

Exisitng Roof

SOUTH ELEVATION

WEST ELEVATION

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: NTS© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 05

570 Casuarina WayCasuarina Beach NSW 2487

3D VIEWS

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: NTS© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 06

570 Casuarina WayCasuarina Beach NSW 2487

3D VIEWS

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: NTS© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 07

570 Casuarina WayCasuarina Beach NSW 2487

3D VIEWS

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383

GSPublisherVersion 945.57.78.19

SCALE: NTS© COPYRIGHT CREATE ARCHITECTURE

DATE: 12/03/2021

64 THE MAIN BRACE, YAMBA, NSWYAMBA SHORES TAVERN

JOB: 2027DWG: DA - 08

570 Casuarina WayCasuarina Beach NSW 2487

3D VIEWS

DISTRIBUTIONISSUE DATENOTES:DO NOT SCALE OFF DRAWINGSVerify all dimensions on site prior to commencement of work. Structure to be designed & certifiedby structural engineer. Manufacturers specifications and details take precedence over thesedrawings. Contractor to ensure all materials and installation methods used comply with allAustralian Standards, NCC and manufacturers specifications and details. Contractor to ensure allmaterials used are suitable in regards to proximity to the ocean. The purpose of these architectsdetails are to communicate design intent. Contractor to notify any discrepancies between thesedetails and or Australian Standards, NCC and manufacturers specifications to the Architect prior tocommencement of work.

info@createarchitecture.com.aucreatearchitecture.com.au

ARB 7017 3539 AIA No. 22721

02 6674 0488

19.02.2021A MASTER PLAN11.03.2021B SCHEMATIC DESIGN12.03.2021C DEVELOPMENT APPLICATION

Version: 1, Version Date: 30/08/2021Document Set ID: 2265383