YAMAHA - Touratech Thailand · PDF fileGPS Handlebar Bracket Adapter The bracket adapter is...

1

2

3

4

5

6

7

Engine guard | Cylinder protection | Fairing from p. 766

Tank bags from p. 778

Handlebar | Cockpit | Windscreens | Lighting from p. 756

Seats page from p. 772

Pannier systems from p. 780

Foot pegs from p. 771

Suspension from p. 774

754

YAMAHAXT1200ZSUPER TÉNÉRÉ

www.touratech.de//yamahaxt1200z

1

7

5

4

2

3

6

755

756

MADE IN THE EU (GERMANY )

Windscreen Adjuster with GPS Mounting Bar

Yamaha XT1200Z Super Ténéré (up to 2013)

Our customers and industry insiders have been impressed with our current Desierto conversions for the BMW-GS and its universal windscreen adjuster. Now we also bring you a windscreen with a similar level of comfort for the Super Ténéré. The best thing is that you keep the standard wind-screen, only now its tilt angle and height are steplessly ad-justable. In addition, it can be fitted in two different height ranges. And the cherry on top: there is also a steplessly height-adjustable bar for mounting a GPS device.

046-0622

XT

1200

Z S

UPE

R TÉ

NÉR

É

757

YAMAHA

GPS Handlebar Bracket AdapterThe bracket adapter is simply fitted to the handle-bar mounting clamps on your Yamaha.Our GPS brackets all fit perfectly on its 12 mm brace. For easy, safe attachment of your GPS. With virtually no impairment of the view of the instru-ments.

046-0601 up to 2013

046-5410 from 2014

Spoiler for WindscreenThis special spoiler for the windscreen is perfect for undertaking long, fast motorbike journeys in com-fort. There is a significant reduction in turbulence and wind pressure against the helmet.

It simply fits onto the windscreen, and is secured using the snap closure. When going off-road, the spoiler is easy to remove in seconds.

046-0647 lockable

Kaoko Cruise Control, Mechanical Cruise Control XT1200Z (up to 2013)

The original by the South African inventor!The Cruise control replaces the original handlebar end weights. The anti-slip knurled screw secu-res the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gen-tly - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle.Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incor-rectly. We are unable to accept any responsibility for it. Use at the owner’s/rider’s own risk.

330-0019

758


Handlebar Risers Yamaha XT1200Z Super Ténéré

The handlebar risers provide significant relief from your wrists and shoulders. In addition, it allows a more upright standing, which improves stamina and concentration when riding off road. In short, the handlebar risers improve the control of the motorcycle! The kind of increase we have specially adapted to the Super Ténéré and the height of 20 mm enables a simple installation, without the costly reconstruction of cables and wires.

046-5255 up to 2013 (Typ 30)

046-5260 from 2014 (Typ 43)

Touratech Handprotectors GDYamaha XT1200Z Super Ténéré

Enclosed, virtually indestructible hand guards with special fitting set for the Super Ténéré 1200.Reliably protects riders hands and levers from damage.

040-6836 black

040-6837 yellow

040-6838 blue

040-6839 red

040-6840 white

Spoiler for TT-Hand Protectors GDColours for hand protectors and spoilers can be combined as you wish.

040-7301 black

040-7302 yellow

040-7303 blue

040-7304 red

040-7305 white

End CapsTouratech end caps let you create visual highlights in colours to match your bike.• Individually interchangeable with many hand

protectors (M8), oil filler plugs and frame plugs• Made from colour anodised aluminium

040-5900 M6, gold anodized

040-5901 M6, red anodized

040-5902 M6, black anodized

040-5903 M6, titanium color anodized

040-5904 M8, gold anodized

040-5905 M8, red anodized

040-5906 M8, black anodized

040-5907 M8 , titanium colour anodized

1 unit per pack. For handguards please order 2 pieces.

XT

1200

Z S

UPE

R TÉ

NÉR

É

759

YAMAHA

045-

5467

760


040-5466

Daytime Running Lights Yamaha XT1200Z Super Ténéré

Increased safety and cool design now available for motorbikes too! Unmissable – powerful – domi-nant – LEDayFlex. The LEDayFlex daytime running lights system that we use is accommodated in a specially developed metal body for optimum mounting on the Yamaha. We have combined advanced design and innovative lighting technology into a perfect unit. More Information: shop.touratech.com

046-0650

LED Fog Lamp and Auxiliary Headlight

Yamaha XT1200Z Super Ténéré

We use innovative LED headlights of 70mm diameter for our auxiliary headlights. The excellent light output is made possible by the latest lighting technology and high-performance LEDS with a higher level of efficiency. Power consumption just 13 watts

per headlight! (Halogen: ~55 watts )

LED auxiliary light

set left + right fog,

silver

LED auxiliary light

set left + right fog,

black

LED auxiliary set light

fog right/beam left,

silver

LED auxiliary set light fog

right/beam left, black

046-5470 046-5471 046-5472 046-5473

Headlight protector for LED auxiliary headlight, set

040-5467 anodised black aluminium

040-5466 anodised natural aluminium

XT

1200

Z S

UPE

R TÉ

NÉR

É

761

YAMAHA

762


Headlight protector for Touratech fog headlight and Xenon headlight;

anodised black aluminium

Robust enough to protect against flying stones - filigree enough not to impair the lighting intensity!

040-5468 ( per piece)

Auxiliary LightsYamaha XT1200Z Super Ténéré

Our auxiliary lights deliver considerable improve-ments in active and passive safety. Thanks to the high-tech lamps that are used, the road is much better illuminated at night. During the day, the clearly visible light pattern makes you and your motorbike much easier to see. The fog light ensures significantly better close range visibility in hazy and foggy conditions. The Xenon headlight, which

operates in tandem with the full beam headlight, provides far brighter illumination. The auxiliary headlights are available separately, but are per-fect as a twin-pack. Carries the E-test mark.

046-0636 Fog light right

046-0634 Fog light left

046-0638 Xenon headlight

XT

1200

Z S

UPE

R TÉ

NÉR

É

763

YAMAHA

Front Panel


The Super Ténéré is a feast for the eyes, that of course. Just below the lighthouse it has an empty space, in our opinion, all a bit ugly.Therefore, we have developed specifically for the XT1200Z a front panel that fits like a glove to the contour and perfect impression. With it, the Super Ténéré looks a lot better from the front.Material: Aluminum black anodized.

046-0651

Stainless Steel Headlight Protector


Especially on gravel roads, headlights are always at risk of being damaged by stones thrown up by the vehicle in front. Touratech’s stainless steel head-light protector effectively prevents larger stones from damaging the headlight lens. The latticework creates a rugged off-road look and considerably modifies the bike’s appearance. As well as being a practical product made from laser-cut black

stainless steel, it also matches the style of a touring enduro.Another great feature is the quick release fastener that lets you easily clip on the headlight protector and detach it again as needed. And of course the protector comes with everything you need to fit it.

046-5095

764


Photo: Nick Sanders | USA

Lambda Sensor CoverYamaha XT1200Z Super Ténéré

Where as damage to the manifold is generally only cosmetic, a damaged lambda sensor will definitely put a dent in your wal-let when your bike has its next emissions test. A good enough reason to protect the sensitive sensor with a solid cover.

046-0629

Neopren Fork Protector with Velcro strap

Yamaha XT1200Z Super Ténéré (25cm)The Touratech fork protectors for the XT give utmost protec-tion to the stanchion. Forget about damage caused by flying stones, dust or mud. Our new fork protectors are made of soft neoprene and mount without tools. They are wrapped around the sensitive parts of the fork, fastened with Velcro and fixed.

420-5625

XT

1200

Z S

UPE

R TÉ

NÉR

É

765

YAMAHA

766


Crash Bars *Stainless Steel*Even minor falls can badly damage your Yamaha Super Ténéré tank and fairing. Repairing or replacing the tank or fairing is very expensive. Minimise the risk and use our extremely rugged Touratech crashbar.

The lines and forms of the refined Yamaha Super Ténéré have been used again and incorporated beautifully into the whole appearance of the motor cycle. In spite of the fact that they are so good to look at, they are certainly one of the best crash bars on the market. The crash bars are

Engine Guard, Large

We’ve incorporated the experience gained at countless rallyes in the large engine guard for the Super Ténéré. The engine guard, which was designed specifically for the Super Ténéré, distributes any shocks and loads over the entire engine block. The angled front makes it much easier to glide over stones, rocks and uneven road surfaces. The base plate of the engine guard is made of 3 mm aluminium sheet, reinforced by 2 mm stainless steel sheet. Rivets create a visually appealing, sturdy and highly resistant connection of the individual parts. The brackets are also made of indestructible stainless steel. The engine guard can easily be attached with our crash bars.

046-5137

046-5138 (black)

made of non-rust stainless steel. The XT1200Z really needs this high-quality, refined material. It is very easy and quick to fit. Most necessary maintenance work can be done without remov-ing the crash bars.• 25/18 mm stainless steel tubing• Fittings included

046-5160

046-5161 (black)

XT

1200

Z S

UPE

R TÉ

NÉR

É

767

YAMAHA

046-0628

048-0132

Manifold Protection GuardsWhen riding off-road, the manifolds are defenceless against flying stones and debris. Now we can supply two guards to protect the pipe-work on the XT1200Z. The flexible cover is a universal product that has proved its effectiveness on many different models. The „manifold guard, bottom right“, on the other hand, has been specially developed for the Super Ténéré. With these accessories, you can be assured longer lasting protection.

046-0628 Manifold guard, bottom right

048-0132 Manifold guard, flexible, universal

Rear Brake Reservoir Guard

Yamaha XT1200Z Super Ténéré (up to 2013)

Our cover protects the plastic brake fluid reservoir behind an elegant finish. Its special design almost completely surrounds the reservoir, which otherwise is exposed. The cover shields the reservoir from flying dirt and stones. With additional length at the bottom for that little extra protection!

046-0670

Oil Filler PlugYamaha XT1200Z Super Ténéré

Certain unsavoury characters might have stupid ideas in their heads, but they rarely have an Allen key in their pocket. So use our hex socket oil filler plug to protect the engine oil in your Super Ténéré against any unwanted “additives” – and it will definitely have a positive influence on the appearance of the engine block.

046-0646

768


Side Stand Base ExtensionIn the sorts of places where you’d ideally park an adventure bike, tarmacked parking spaces are hard to find. Parking a bike off-road is only a pleasant experience if the conditions are right. A side stand base extension makes life easier, saving you the strenuous effort of lifting the fully laden machine.

046-0603 up to 2013

046-5276 from 2014

Side stand Switch ProtectorYamaha XT1200Z Super Ténéré

The side stand switch often goes completely unnoticed. It’s only when it stops working and the bike keeps refusing to start that you realize just how important this component is.So we’ve made a stainless steel protector for the side stand switch. It’s effective and matches the engineering quality and design of the Super Ténéré.

046-5105

Drive Shaft Crash BungsYamaha XT1200Z Super Ténéré

Our Touratech crash bung protects the drive shaft against expensive damage in the event of a fall.Thanks to its solid construction, the crash bung ab-sorbs the forces and reliably protects the drive shaft tunnel against damage caused by contact with the road surface.

046-5051

XT

1200

Z S

UPE

R TÉ

NÉR

É

769

YAMAHA

ABS Sensor Protection (Set)Yamaha XT1200Z Super Ténéré

ABS cannot function without information about the wheel speed. Proper protection for the sen-sitive wheel speed sensors is therefore essential, especially on machines that often travel on rough ground. We have developed a made-to-measure set of protectors for the front and rear wheels on the Super Ténéré.

046-0630

Mudguard FlapYamaha XT1200Z Super Ténéré

• Effective mudguard flap for the rear wheel

• Your back and your luggage stay clean

• Also serves as a number plate reinforcement

• Aluminium plate with black plastic coating

046-0600

Side Panel SetYamaha XT1200Z Super Ténéré (up to 2013)

Discreet in appearance yet highly effective, the Tou-ratech side panels for the Yamaha XT1200Z Super Ténéré provide excellent protection against water, mud and stones.

Save yourself and your luggage from all that muck chucked up off the road!• Made of sturdy plastic• Easy to fit

046-5435

770


Brake Pedal Extension

You wear sturdy boots when riding off-road. They offer good protection, but they seriously limit what you can feel through the sole. It seems the people at Yamaha didn’t think about this when they designed their foot brake lever. Touratech has designed this large, serrated foot brake pedal extension so you can safely stop your Super Ténéré – even if you’re wearing mud-encrusted cross boots.

046-0607

Heel Protector Right/Left


The simple sheet-metal original shields offer only limited pro-tection on unpaved roads. We’ve developed a heel protector that meets the highest standards of both functionality and appearance so that you’re truly prepared for anything.Made from a material mix of resilient stainless steel and lightweight black anodised aluminium that will withstand just about anything, they also add a visual accent. This will make your Super Ténéré even more perfect!

046-0640 left

046-0642 right

Pivot Pegz - *Mark3* Yamaha XT1200Z Super Ténéré

An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees.

040-5511

*Works* long-distance foot pegsYamaha XT1200Z

The Touratech Works foot pegs have been specially strengthe-ned at the mounting point, making them significantly less susceptible to impacts. The Works products are an optical highlight as well.

046-5315

XT

1200

Z S

UPE

R TÉ

NÉR

É

771

YAMAHA

*Fresh Touch*

The high quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It reduces the surface temperature by significant-ly reflecting infrared light radiation and providing a cooler feeling when mounting a motorcycle parked in the sun. An additional, exclusive gain in comfort for your riding pleasure!

772


IN THE EU - (GERMANY)

Comfort seat *Fresh Touch*Yamaha XT1200Z

Yamaha‘s design for a large touring enduro, as equipped from the factory, does provide essentially continuous comfort over long distances for both rider and passenger.However, its seat was criticised because the foam used in its construction was too soft and its contours were less than ideal for longer distances, eventually causing pain and pressure points. Our comfort seat eliminates these nagging problems on those longer trips. It has optimised contours, a top-quality foam core available in three different heights and is upholstered in anti-slip and sweat-resistant sand-coloured fabric. This high

Holding strap for passenger seat Yamaha XT1200Z from model 2015 onwards

As Yamaha delivers the XT 1200 Z from model 2015 onwards without holding grips for passengers, but with holding straps on the passenger seat, it is ne-cessary to add this longer Touratech holding strap if one uses the Touratech passenger seat.

046-5903

low -2cm standard high +2cm pillon

Comfort seat *Fresh Touch* 046-5950 046-5951 046-5952 046-5957

Comfort seat *breathable* - 046-5904 046-5905 046-5910

quality seat is supplied complete and ready-to-fit - there is no delay waiting for reupholstery work. It does not require any modifications to your motor-bike and simply replaces the original seat, which you can keep.Seat *Breathable*The breathable seat offers tremendous advantages over the standard one, especially at high tempera-tures. It enables the air to circulate inside the seat, which efficiently eliminates perspiration in the seat area. This in turn helps to prevent the under-clothing from sticking and wrinkling.

XT

1200

Z S

UPE

R TÉ

NÉR

É

773

YAMAHA

Touratech Suspension Yamaha XT1200Z Super Ténéré

Many Advantages to Other High-End Brands!

Introducing the new Touratech suspen-sion Touratech have launched a range of topnotch shock absorbers that enable individual tuning for all kinds of uses and set standards for traction, comfort and dynamic safety. All shock absorber types are manufactured to the highest engineering and quality standards. You will certainly feel the difference in riding comfort! The shocks were developed for traction, comfort, dyna-mic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind.

The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by theToura-tech experts in Enduro use during the 2012 season.

Detailed information on Touratech Sus-pension and available variants can be found starting on page 1014!

Not for Yamaha XT 1200 ZE

XT1200Z Level2 *Extreme*

046-5880 046-5870

774


Detailed information on Touratech Suspension and available variants can be found starting on page 1014!

The Touratech Suspension ACE system responds at lightning speed to extreme forces such as emer-gency braking and powerful acceleration. When the bike is loaded for touring and/or carrying a pillion passenger, the ride characteristics can vary greatly and become very tiring. The Touratech Suspension ACE system offers the motorcyclist a high degree of active ride safety and touring comfort. The bike’s wheels stay where they should be: on the road.

Touratech ACE Suspension. ACE = Actively Controlled Electronic Suspension.

• The Electric Preload Adjuster (EPA) equalises the load on the motorcycle (“balance”).

• The Dynamic Damping Adjustment (DDA) can be adjusted from comfort to hard sports settings.

• The Actively Controlled Electronic Suspension (ACE) control unit detects positive or negative acceleration (braking) and actively adjusts the damping as required via the DDA valve.

046-5872 (Yamaha Super Tenere Z / Not for „ZE“)

XT

1200

Z S

UPE

R TÉ

NÉR

É

775

YAMAHA

Photo: TT-USA

776


Progressive replacement fork springs, front

Yamaha XT1200Z (Not for „ZE“)

Thanks to the progressive replacement springs by the renowned chassic specialists Hyperpro, the XT‘s forks can release undreamt-of possibilites. With fork oil.

046-0307

Hyperpro progressive replacement springs for fork and shock absorber (Not for „ZE“)

Full set by Hyperpro, the Dutch specialist for suspension products. The set includes replacement fork springs and a replacement spring for the shock absorber. The progressive springs have been designed to match the Yamaha XT1200Z Super Tenere perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. Re-placing the front and rear springs will lead to a significant improvement in your suspension system.

046-0308

XT

1200

Z S

UPE

R TÉ

NÉR

É

777

YAMAHA

Tank Bag, “Black Edition”*waterproof*Yamaha XT1200Z Super Tenere

The “Black Edition” tank bag packs an array of clever detail solutions: an aerodynamically optimised map pocket, document compartment with separate credit card pouch in the top cover, waterproof zips and two practical side pockets. Reflective panels lend the finishing touch to this black tank bag, which is made from completely waterproof PVC-coated polyester fabric.

Size: (l x w x h) approx. 35 x 26 x 18 / 25 cm. Volume: approx. 14/20 litres.Colour: blackSuitable for all model years! Made in Germany by KAHEDO.

046-5803

Water Protected Tank BagYamaha XT1200Z Super Ténéré

The tank bag for the new Super Ténéré is sheer elegance combined with outstanding functionality.

Features:• Basic shape fits the Yamaha Super Ténéré perfectly• Made from Teflon-coated CORDURA which is both waterproof

and dirt-resistant• Waterproof zips• Two slim side pockets for your wallet, various papers or a

multitool• Document compartment with separate credit card pouch in

the top cover• Map pocket holds maps up to A4 size• Zip to expand volume from 10 to 16 litres

The tank bag attaches quickly with two clip-buckles at the front and a Velcro panel on the back.The two additional straps can be used when riding off-road or with a heavy load. And the tank bag can still be worn as a ruck-sack using the supplied straps.

Dimensions: (l x w x h) 30 x 26 x 17 / 25 cmCapacity: approx. 10 / 16 litres

055-1197

778


Luggage Rack for Pillion Seat

A single seat with the luggage rack brought forward to the passenger seat – this is a solution which has proven itself on extreme trips and which we can now offer for the Super Ténéré. Heavy luggage is shifted closer to the bike’s centre of gravity, significantly improving handling on tricky roads. A must-have for individualists and globetrotters.

046-0616

Tail Bag for Pillion Seat

Go for a ride on your own once in a while – our rear pannier is the perfect companion and straps to the pillion seat where it is closer to the centre of gravity. Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO.

Dimensions (l x w x h): approx. 30 x 33 x 21 cm. Volume: approx. 20 litres.

055-1219

Luggage Rack

Our luggage rack is a solid bit of kit. The laser-cut aluminium plate bolts onto the existing mounting points above the rear mudguard. With belt slots all the way round, you can securely tie down even bulky luggage.

046-0612

XT

1200

Z S

UPE

R TÉ

NÉR

É

779

YAMAHA

ZEGA Pro Topcase RackYamaha XT1200Z Super Tenere

The special carrier for our ZEGA Pro Topcases!Made entirely of stainless steel and specifically designed for the Yamaha attachment points, the Topcase rack is the perfect way to attach ZEGA Pro Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system. You will find the available Topcases on page 842 and the following.

046-0610

046-5456 (black)

Pannier Rack Yamaha XT1200Z Super Ténéré

Perfectly matched to the bike’s geometry, the stainless steel rack clings closely to the Super Ténéré’s rear frame. For punishing off-road conditions this means less leverage, which reduces the stress on the rack and the tail of the bike. A choice of ZEGA Pro panniers are available with an aluminium or black anodised »AND-Black« finish.

046-5555

046-5561 (black)

Extra Bag under the ZEGA Pro Topcase Luggage RackFor design reasons, some of our ZEGA Pro Topcase luggage racks have a space between the carrier plate and the rear light. This space needn’t go to waste! Our extra bag adds four litres of additional storage space. The bag is specially designed to fit perfectly beneath the luggage rack. It offers space for all the smaller items you need, such as spare gloves, a first aid kit, or a tool roll. Colour: black. Dimensions: approx. 20 x 22 x 9 cm. Volume: approx. 4 litres.Made of Teflon-coated CORDURA, therefore water-repellent and dirt-resistant.

044-5814

780


96 cm

31 38

104 cm

38 45

ZEGA Pro Aluminium Pannier SystemThe aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The anodised version of the ZEGA Pro doesn‘t just shine in its fabulous natural

Pannier System with: stainless steel rack black stainless steel rack

ZEGA Mundo 31/38 L 046-6130 046-6180

ZEGA Pro 31/38 L 052-3611 046-5780

ZEGA Pro AND-S 31/38 L 052-3612 046-5781

ZEGA Pro AND-Black 31/38 L 052-3613 046-5782

Pannier System with: stainless steel rack black stainless steel rack

ZEGA Mundo 38/45 L 046-6135 046-6185

ZEGA Pro 38/45 L 052-3614 046-5785

ZEGA Pro AND-S 38/45 L 052-3615 046-5786

ZEGA Pro AND-Black 38/45 L 052-3616 046-5787

aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Aluminium pannier system, premounted.

XT

1200

Z S

UPE

R TÉ

NÉR

É

781

YAMAHA

Alu

And-S

And-Black

ZEGA PRO2

782


94 cm

31 | 38

102 cm

38 | 45

Complete information about the innovative aluminium case on page 812 or www.touratech.com/zegapro2_en

Pannier System with: stainless steel rack black

ZEGA Pro2 - 31/38 L 046-6030 046-6080

ZEGA Pro2 - AND-S 31/38 L 046-6031 046-6081

ZEGA Pro2 - AND-Black 31/38 L 046-6032 046-6082

Pannier System with: stainless steel rack black

ZEGA Pro2 - 38/45 L 046-6035 046-6085

ZEGA Pro2 - AND-S 38/45 L 046-6036 046-6086

ZEGA Pro2 - AND-Black 38/45 L 046-6037 046-6087

XT

1200

Z S

UPE

R TÉ

NÉR

É

783

YAMAHA

YAMAHA - Touratech Thailand · PDF fileGPS Handlebar Bracket Adapter The bracket adapter is...

Documents

Transcript of YAMAHA - Touratech Thailand · PDF fileGPS Handlebar Bracket Adapter The bracket adapter is...