Y Beach Umbrella Clamp - PrusaPrinters · A replacement part for beach umbrella clamp. I designed...
Transcript of Y Beach Umbrella Clamp - PrusaPrinters · A replacement part for beach umbrella clamp. I designed...
Stamos
Beach UmbrellaClamp
VIEW IN BROWSER
updated 3. 6. 2019 | published 3. 6. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
4.2 MBupdated 3. 6. 2019
PRUSAPRINTERS
Summary
A replacement part for beach umbrella clamp. I designed this part toreplace the broken quick release clamp. The diameter of the big tube is32mm and the smaller (that goes into the big one) 29mm. Design isavailable in Onshape if you want to modify dimensions according to yourumbrella's poll and your printer's tolerances.
Seasonal designs > Summer
umbrella clamp
umbrella-clamp.stl
3D M
ODEL
ONLY
3.2 MBupdated 3. 6. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
umbrella-clamp-bolt.stl