Y-Axis Turret 76mm Built-in Spindle Double ... - CNC Lathe
2
Competence and Capabilities CT1 Y-Axis Turret 76mm Built-in Spindle Double Spindle Versatility 2 Spindles 1 Turret The CT1’s double spindle design allows for the cutting of complex parts in a single setup, and coupled with a 16-station turret. When the Y-Axis turret is in the upper position, it can complete machining on parts in the main or sub spindle. In addition, tools can be placed facing either the main or sub spindle. The special structural design uses a 90° angle for the turret carriage so you maintain superb rigidity and stability in machining. Additionally, this allows you to use a simpler controller specification, reducing programming complexity and saving you money at the same time. The servo turrets are designed and built by CC Machinery especially for the CT series. This ensures maximum accuracy during machining, along with super fine finishes. Advanced Machining Solutions T +886-4-2533-7614 E [email protected]
Transcript of Y-Axis Turret 76mm Built-in Spindle Double ... - CNC Lathe
Competence and Capabilities
CT1Y-Axis Turret76mm Built-in SpindleDouble Spindle Versatility
2 Spindles1 Turret
The CT1’s double spindle design allows for the cutting of complex parts in a single setup, and coupled with a 16-station turret.
When the Y-Axis turret is in the upper position, it can complete machining on parts in the main or sub spindle. In addition, tools can be placed facing either the main or sub spindle.
The special structural design uses a 90° angle for the turret carriage so you maintain superb rigidity and stability in machining. Additionally, this allows you to use a simpler controller specification, reducing programming complexity and saving you money at the same time.
The servo turrets are designed and built by CC Machinery especially for the CT series. This ensures maximum accuracy during machining, along with super fine finishes.
Advanced Machining Solutions
T +886-4-2533-7614 E [email protected]
3862086
2061
1640 60
CT13125 1554
410
506
1774
41734779
100
Machine Layout
TEL: +886-4-2533-7614FAX: +886-4-2532-9524http://www.chiah-chyun.commail: [email protected] CHYUN MACHINERY CO., LTD.
* Design and specs subject to change without notice.* M: Mitsubishi, F: Fanuc
SpecificationsModel
Max. Turning Dia.Standard Turning Dia.Max. Turning LengthX1/Y1/Z1-Axis TravelX1/Y1/Z1-Axis MotorX1/Y1/Z1-Axis Rapid Travel SpeedB-Axis TravelB-Axis MotorB-Axis Rapid Travel SpeedMin. Input UnitMax. Bar Feeding Dia.Spindle MotorMax. Spindle SpeedSpindle NoseChuck SizeMax. Bar Feeding Dia.Spindle Motor Max. Sub Spindle SpeedSpindle NoseChuck SizeMin. Moving UnitC-Axis Rapid Travel RateO.D Turning Tool SizeI.D Turning Tool SizeRotating ModeLive Tooling rpmLive Tooling Motor Collet SizeTool Holder & Tool SizeHydraulic MotorSpindle Coolant PumpTurret Coolant MotorChip Flush Pump Sub Spindle Internal Coolant PumpHydraulic TankCoolant TankMachine Size (LxWxH) (includes chip conveyor)Machine N.W. (includes chip conveyor)
ControllerControl Unit
40 m/min0.001 mm
4000 rpmA2-6
8"∅65 mm
Capacity
Axes Specification
Live Tooling Turret
Hydraulic
Sub Spindle
L, R, C
Spindle
Tank Capacity
Coolant Pump
Machine
FANUC ∅325 mm∅210 mm
60 mm
16/6/40 m/min
4000 rpmA2-6
8"0.001°
600 min-1
□25 mm∅25 mm
Single Tool Transmission60~6000 min-1
ER∅32BMT65
5HP / 3.7 kW1HP / 0.75 kW1HP / 0.75 kW1HP / 0.75 kW1HP / 0.75 kW
45 L325 L
4779 x 2086 x 2061 mm8000 kg
Unit: mm
CT1-76
2.7kW
18 / 22kW
2.7kW
∅76 mm18 / 22kW
4.5kW
MITSUBISHI
6 mm225 mm/±50 mm/ 365
2.2 kW
2.2 kW
15 / 22 kW
7.5 / 11 kW
3.7/ 5.5 kW
90 mm.56
