Xorcom XP Phones - Sangomaliterature.schmoozecom.com/Phones/Userguides/Xorcom-XP/... ·...
Transcript of Xorcom XP Phones - Sangomaliterature.schmoozecom.com/Phones/Userguides/Xorcom-XP/... ·...
Xorcom XP Phones
Admin Guide
Schmooze Com Inc.
XP0120P and XP0100P
0* #SEND
1 2ABC 3DEF
5 64
8 97
JKL MNOGHI
TUV WXYZPQRS
Menu DND Int Dir
16:25:20
5601
XP0120P
How To Find IP Address and MAC Address
Quick Steps 1. Press the “Menu” button.
2. Scroll down to “Status” and press the “Enter” softkey.
3. Scroll down to see either the IP address or the MAC address.
© Copyright Schmooze Com, 2012
How To Set the Configuration Server
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the ”Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
4. Scroll down to “Auto Provision” and press the “Enter” softkey.
5. Define the URL to your PBX. Generally this would be tftp://IPADDRESS such as tftp://10.10.0.1 in our example and press the “Save” button at the bottom.
How To Factory Default
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the “Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
Menu DND Int Dir
16:25:20
5601
XP0120P
Exit Enter
Main Menu 1/6
1. Status
2. Features
3. Settings
XP0120P
Back
Main Menu 1/4
1. IP: 10.4.0.180
2. MAC: 00:00:00:00:00:00
3. Firmware: 65.61.151.2
XP0120P
4. Scroll down to “Reset to Factory” and press the “Enter” softkey.
How To Find IP Address and MAC Address
Quick Steps 1. Press the “Menu” button.
2. Scroll down to “Status” and press the “Enter” softkey.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the ”Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
4. Scroll down to “Auto Provision” and press the “Enter” softkey.
© Copyright Schmooze Com, 2012
5. Define the URL to your PBX. Generally this would be tftp://IPADDRESS such as tftp://10.10.0.1 in our example and press the “Save” button at the bottom.
How To Factory Default
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the “Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
Menu DND Int Dir
16:25:20
5601
XP0120P
Exit Enter
Main Menu 3/6
1. Features
2. Settings
3. Messages
XP0120P
Back Enter
Setting Type 2/2
1. Basic Settings
2. Advanced Settings
XP0120P
Back Enter
Advanced Settings 8/9
6. Set Password
7. Set AES Key
8. Auto Provision
XP0120P
4. Scroll down to “Reset to Factory” and press the “Enter” softkey.
How To Find IP Address and MAC Address
Quick Steps 1. Press the “Menu” button.
2. Scroll down to “Status” and press the “Enter” softkey.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the ”Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
4. Scroll down to “Auto Provision” and press the “Enter” softkey.
5. Define the URL to your PBX. Generally this would be tftp://IPADDRESS such as tftp://10.10.0.1 in our example and press the “Save” button at the bottom.
How To Factory Default
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the “Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
© Copyright Schmooze Com, 2012
Back 2aB Del Save
Auto Provision 1/3
1. URL:
10.10.0.1
XP0120P
Exit Enter
Main Menu 3/6
1. Features
2. Settings
3. Messages
XP0120P
4. Scroll down to “Reset to Factory” and press the “Enter” softkey.
Menu DND Int Dir
16:25:20
5601
XP0120P
How To Find IP Address and MAC Address
Quick Steps 1. Press the “Menu” button.
2. Scroll down to “Status” and press the “Enter” softkey.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the ”Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
4. Scroll down to “Auto Provision” and press the “Enter” softkey.
5. Define the URL to your PBX. Generally this would be tftp://IPADDRESS such as tftp://10.10.0.1 in our example and press the “Save” button at the bottom.
How To Factory Default
Quick Steps 1. Select the “Menu” button.
2. Scroll down to “Settings” and press the “Enter” softkey.
3. Scroll down to “Advanced Settings” and press the “Enter” softkey.
Back Enter
Setting Type 2/2
1. Basic Settings
2. Advanced Settings
XP0120P
Back Enter
Advanced Settings 5/9
3. Softkey Label
4. Phone Settings
2. Reset to factory
XP0120P
4. Scroll down to “Reset to Factory” and press the “Enter” softkey.
© Copyright Schmooze Com, 2012
Schmooze Com Inc.
http://schmoozecom.com
(920) 886-8130