€¦ · XLS file · Web view · 2018-03-13EN 62488-2:2017 Power line communication systems for...

SECTIUNEA 1, CAPITOLUL 1

Minister CT Indicativ EN Titlu

1 MAI 55 EN ISO 7010:2012

2 MAI 55 EN ISO 7010:2012/A1:2014

3 MAI 55 EN ISO 7010:2012/A2:2014

4 MAI 55 EN ISO 7010:2012/A3:2014

5 MAI 55 EN ISO 7010:2012/A4:2014

6 MAI 55 EN ISO 7010:2012/A5:2015

7 MAI 55 EN ISO 7010:2012/A6:2016

8 MAI 55 EN ISO 7010:2012/A7:2017

9 MAI 216 EN 3-9:2006

10 MAI 216 EN 3-9:2006/AC:2007

11 MAI 216 EN 54-1:2011

12 MAI 216 EN 1846-1:2011

13 MAI 216 EN 12845:2015/AC:2016

14 MAI 217 EN 1365-3:1999

15 MAI 217 EN 13501-2:2016

16 MAI 217 CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test

Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române

Nr crt

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011)

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012)




Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2011/Amd 5:2014)



Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers

Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers

Fire detection and fire alarm systems - Part 1: Introduction

Firefighting and rescue service vehicles - Part 1: Nomenclature and designation

Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance

Fire resistance tests for loadbearing elements - Part 3: Beams

Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services

17 MAP 52 EN ISO 7393-2:2018

18 MAP 52 EN 12678:2016

19 MAP 52 EN ISO 12846:2012

20 MAP 52 EN 16056:2012

21 MAP 52 EN 16057:2012

22 MAP 52 EN 16058:2012

23 MAP 52 EN ISO 17294-2:2016

24 MCSI 208 EN ISO/IEC 27000:2017

25 MCSI 208 EN ISO/IEC 27001:2017

26 MCSI 208 EN ISO/IEC 27002:2017

27 MCSI 208 EN ISO/IEC 27038:2016

28 MCSI 208 EN ISO/IEC 27040:2016

29 MCSI 208 EN ISO/IEC 27041:2016

Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)

Chemical used for treatment of water intended for human consumption - Potassium peroxomonosulfate

Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)

Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels

Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method

Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method

Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)

Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016)

Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015)

Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 including Cor 1:2014 and Cor 2:2015)

Information technology - Security techniques - Specification for digital redaction (ISO/IEC 27038:2014)

Information technology - Security techniques - Storage security (ISO/IEC 27040:2015)

Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015)

30 MCSI 208 EN ISO/IEC 27042:2016

31 136 HD 60364-6:2016/AC:2017-11 Low-voltage electrical installations - Part 6: Verification

32 136 HD 60364-7-708:2009/A11:2017

33 207 CEN/TR 15232-2:2016

34 207 EN 15232-1:2017

35 207 CEN/TR 15500-2:2016

36 207 EN 15500-1:2017

37 218 EN 13331-1:2002 Trench lining systems - Part 1: Product specifications

38 218 EN 13331-2:2002

39 240 CEN/TR 15193-2:2017

40 240 EN 15193-1:2017

41 281 EN ISO 6781-3:2015

42 281 EN ISO 9972:2015

43 281 EN ISO 10077-1:2017

44 281 EN ISO 10077-2:2017

45 281 EN ISO 12569:2017

46 281 EN ISO 12572:2016

47 281 EN ISO 12631:2017

48 281 EN ISO 13786:2017

Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015)

MDRAPFE

MDRAPFE

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

MDRAPFE

Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10

MDRAPFE

Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10

MDRAPFE

Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5

MDRAPFE

Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5

MDRAPFE

MDRAPFE

Trench lining systems - Part 2: Assessment by calculation or test

MDRAPFE

Energy performance of buildings - Energy requirements for lighting - Part 2: Explanation and justification of EN 15193-1, Module M9

MDRAPFE

Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9

MDRAPFE

Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)

MDRAPFE

Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)

MDRAPFE

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017)

MDRAPFE

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)

MDRAPFE

Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)

MDRAPFE

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)

MDRAPFE

Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)

MDRAPFE

Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017)

49 281 EN ISO 14683:2017

50 281 EN ISO 15148:2002/A1:2016

51 281 EN ISO 52017-1:2017

52 281 CEN ISO/TR 52018-2:2017

53 281 EN ISO 52018-1:2017

54 281 CEN ISO/TR 52019-2:2017

55 281 CEN ISO/TR 52022-2:2017

56 281 EN ISO 52022-1:2017

57 281 EN ISO 52022-3:2017

58 302 EN 253:2009+A2:2015

59 302 EN 448:2015

60 302 EN 488:2015

61 302 EN ISO 5801:2017

62 302 EN ISO 5802:2008/A1:2015

63 302 EN ISO 9806:2017

MDRAPFE

Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017)

MDRAPFE

Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd 1:2016)

MDRAPFE

Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017)

MDRAPFE

Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1 (ISO/TR 52018-2:2017)

MDRAPFE

Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017)

MDRAPFE

Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017)

MDRAPFE

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

MDRAPFE

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017)

MDRAPFE

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017)

MDRAPFE

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene

MDRAPFE

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

MDRAPFE

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

MDRAPFE

Fans - Performance testing using standardized airways (ISO 5801:2017)

MDRAPFE

Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015)

MDRAPFE

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)

64 302 EN ISO 11855-1:2015

65 302 EN ISO 11855-2:2015

66 302 EN ISO 11855-3:2015

67 302 EN ISO 11855-4:2015

68 302 EN ISO 11855-5:2015

69 302 EN ISO 12759:2015

70 302 EN 12976-1:2017

71 302 EN 13141-11:2015

72 302 EN 13141-3:2017

73 302 EN ISO 13350:2015 Fans - Performance testing of jet fans (ISO 13350:2015)

74 302 EN 14037-2:2016

75 302 EN 14037-3:2016

76 302 EN 14037-4:2016

77 302 EN 14037-5:2016

78 302 EN 15316-4-1:2017

MDRAPFE

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012)

MDRAPFE

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012)

MDRAPFE

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)

MDRAPFE

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012)

MDRAPFE

Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)

MDRAPFE

Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013)

MDRAPFE

Thermal solar systems and components - Factory made systems - Part 1: General requirements

MDRAPFE

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units

MDRAPFE

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan

MDRAPFE

MDRAPFE

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output

MDRAPFE

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output

MDRAPFE

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity

MDRAPFE

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output

MDRAPFE

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1

79 302 EN 15316-4-5:2017

80 302 EN 15316-5:2017

81 302 EN ISO 16170:2016

82 302 EN 16211:2015

83 302 EN 16282-1:2017

84 302 EN 16282-2:2016

85 302 EN 16282-3:2016

86 302 EN 16282-4:2016

87 302 EN 16282-5:2017

88 302 EN 16282-7:2017

89 302 EN 16282-8:2017

90 302 EN 16573:2017

91 302 CEN/TR 16798-14:2017

92 302 CEN/TR 16798-16:2017

93 302 CEN/TR 16798-18:2017

MDRAPFE

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5

MDRAPFE

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7

MDRAPFE

In situ test methods for high efficiency filter systems in industrial facilities (ISO 16170:2016, Corrected version 2017-04)

MDRAPFE

Ventilation for buildings - Measurement of air flows on site - Methods

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; design and safety requirements

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; design and safety requirements

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems

MDRAPFE

Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing

MDRAPFE

Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 16: Interpretation of the requirements in EN 16798-15 - Calculation of cooling systems (Module M4-7) - Storage

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)

94 302 CEN/TR 16798-2:2017

95 302 CEN/TR 16798-6:2017

96 302 CEN/TR 16798-8:2017

97 302 EN 16798-13:2017

98 302 EN 16798-15:2017

99 302 EN 16798-17:2017

100 302 EN 16798-3:2017

101 302 EN 16798-5-1:2017

102 302 EN 16798-5-2:2017

103 302 EN 16798-7:2017

104 302 EN 16798-9:2017

105 302 FprEN 16798-1

106 302 CEN/TR 16798-10:2017

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2 - Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General

MDRAPFE

Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 10: Interpretation of the requirements in EN 16798-9 - Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) - General

107 302 CEN/TR 16798-4:2017

108 302 EN ISO 16891:2016

109 302 EN ISO 22975-1:2016

110 302 EN ISO 22975-2:2016

111 321 EN 206:2013+A1:2016

112 321 EN 451-2:2017

113 321 EN 480-13:2015

114 343 EN 1991-1-3:2003/A1:2015

115 343 EN 1993-1-4:2006/A1:2015

116 343 EN 1993-1-5:2006/A1:2017

117 343 EN 1993-1-6:2007/A1:2017

118 343 EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos

119 343 EN 1993-4-2:2007/A1:2017

120 346 EN 62561-3:2017

121 361 EN ISO 22476-4:2012

122 ME 15 EN 62772:2016

123 ME 19 EN 60068-1:2014 Environmental testing - Part 1: General and guidance

124 ME 19 EN 60068-2-14:2009

125 ME 19 EN 60068-2-31:2008

126 ME 19 EN 60068-2-6:2008

MDRAPFE

Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)

MDRAPFE

Test methods for evaluating degradation of characteristics of cleanable filter media (ISO 16891:2016)

MDRAPFE

Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016)

MDRAPFE

Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance (ISO 22975-2:2016)

MDRAPFE

Concrete - Specification, performance, production and conformity

MDRAPFE

Method of testing fly ash - Part 2: Determination of fineness by wet sieving

MDRAPFE

Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures

MDRAPFE

Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads

MDRAPFE

Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels

MDRAPFE

Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements

MDRAPFE

Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures

MDRAPFE

MDRAPFE

Eurocode 3 - Design of steel structures - Part 4-2: Tanks

MDRAPFE

Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)

MDRAPFE

Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012)

Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

Environmental testing - Part 2-14: Tests - Test N: Change of temperature

Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens

Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

127 ME 23 EN 60534-8-2:2011

128 ME 23 EN 60770-1:2011

129 ME 23 EN 61003-1:2004

130 ME 23 EN 61508-5:2010

131 ME 26 EN 60318-4:2010

132 ME 26 EN 61672-2:2013

133 ME 27 EN 60839-11-2:2015

134 ME 39 EN ISO 14271:2017

135 ME 39 EN ISO 19285:2017

136 ME 39 EN ISO 23279:2017

137 ME 58 EN ISO 12180-1:2011

138 ME 58 EN ISO 12180-2:2011

139 ME 58 EN ISO 12181-1:2011

140 ME 58 EN ISO 12181-2:2011

141 ME 58 EN ISO 80000-1:2013

142 ME 59 EN ISO 898-2:2012

Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves

Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation

Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels

Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts

Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests

Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines

Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)

Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)

Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)

Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)

Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)

Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)

Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)

Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)

143 ME 59 EN ISO 16426:2002

144 ME 66 EN 926-1:2015

145 ME 66 EN 16051-1:2012

146 ME 84 EN ISO 505:2017

147 ME 103 EN ISO 13935-1:2014

148 ME 103 EN ISO 13935-2:2014

149 ME 103 EN ISO 13938-2:1999

150 ME 109 EN 12405-3:2015

151 ME 109 EN 16314:2013 Gas meters - Additional functionalities

152 ME 131 EN 60061-2:1993/A46:2013

153 ME 131 EN 60061-3:1993/A47:2013

154 ME 131 EN 62612:2013/AC:2016-10

155 ME 145 EN 60352-5:2012

156 ME 164 EN 62052-11:2003/A1:2017

157 ME 164 EN 62053-11:2003/A1:2017

158 ME 164 EN 62053-21:2003/A1:2017

159 ME 164 EN 62053-22:2003/A1:2017

160 ME 164 EN 62053-23:2003/A1:2017

161 ME 207 EN 14597:2012

Fasteners - Quality assurance system (ISO 16426:2002)

Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength

Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters

Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017)

Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)

Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)

Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999)

Gas meters - Conversion devices - Part 3: Flow computer

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Temperature control devices and temperature limiters for heat generating systems

162 ME 225 EN 12952-12:2003

163 ME 225 EN 12952-13:2003

164 ME 225 EN 12953-10:2003

165 ME 225 EN 15036-1:2006

166 ME 225 EN 15456:2008

167 ME 230 EN ISO 11146-1:2005

168 ME 230 EN ISO 11146-2:2005

169 ME 230 EN ISO 11670:2003

170 ME 230 EN ISO 13694:2015

171 ME 230 EN ISO 15367-1:2003

172 ME 230 EN ISO 15367-2:2005

173 ME 230 EN ISO 17526:2003

174 ME 231 EN 1968:2002

175 ME 231 EN ISO 11114-2:2013

176 ME 231 EN ISO 11363-1:2018

Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality

Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems

Shell boilers - Part 10 : Requirements for feedwater and boiler water quality

Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators

Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005)

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005)

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015)

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003)

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005)

Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)

Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders

Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)

177 ME 231 EN ISO 15245-1:2001

178 ME 238 EN 60734:2012

179 ME 338 EN ISO 787-1:2017

180 ME 338 EN ISO 787-22:2017

181 ME 338 EN ISO 787-4:2017

182 ME 357 EN 1918-2:2016

183 ME 357 EN 1918-5:2016

184 ME 357 EN ISO 15403-1:2008

185 ME 357 EN ISO 16664:2017

186 ME 357 EN 16723-2:2017

187 ME 357 CEN/TR 16940:2016

188 ME 357 prEN ISO 20765-2

189 MM 19 EN 50625-1:2014

190 MM 19 EN 50625-2-1:2014

191 MM 19 EN 50625-2-2:2015

192 MM 19 EN 50625-2-3:2017

193 MM 19 EN 50625-2-4:2017

194 MM 53 EN 482:2012+A1:2015

195 MM 53 EN 13284-1:2017

Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001)

Household electrical appliances - Performance - Water for testing

General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)

General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)

General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)

Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields

Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities

Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)

Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)

Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification

Domestic gas installations - Recommendations for safety

Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)

Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements

Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps

Collection, logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays

Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC

Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels

Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents

Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

196 MM 53 EN 13284-2:2017

197 MM 276 EN ISO 10140-1:2016

198 MM 276 EN ISO 10848-1:2017

199 MM 276 EN ISO 10848-2:2017

200 MM 360 EN 14405:2017

201 MM 360 EN 14429:2015

202 MM 360 EN 14582:2016

203 MM 360 EN ISO 14780:2017 Solid biofuels - Sample preparation (ISO 14780:2017)

204 MT 345 EN ISO 12813:2015/A1:2017

205 MT 345 EN ISO 14823:2017

206 MT 345 EN 15213-1:2013

207 MT 345 EN 15213-2:2013

208 MT 345 EN 16062:2015

209 MT 345 EN 16102:2011

210 MT 345 EN 16454:2015

211 MT 345 EN ISO 17261:2012

212 MT 345 EN ISO 24978:2009

213 MT 345 EN 28701:2012

Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)

Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition

Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods

Electronic fee collection - Compliance check communication for autonomous systems - Amendment 1 (ISO 12813:2015/Amd 1:2017)

Intelligent transport systems - Graphic data dictionary (ISO 14823:2017)

Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 1: Reference architecture and terminology

Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 2: Common status message elements

Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks

Intelligent transport systems - eCall - Operating requirements for third party support

Intelligent transport systems - ESafety - ECall end to end conformance testing

Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology (ISO 17261:2012)

Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures (ISO 24978:2009)

Intelligent transport systems - Public transport - Identification of Fixed Objects in Public Transport (IFOPT)

214 UE 1 EN 60034-12:2017

215 UE 6 CEN/CLC/ETSI TR 101550:2014

216 UE 6 CEN/CLC/ETSI TR 101551:2014

217 UE 6 CEN/CLC/ETSI/TR 101 552:2014

218 UE 30 EN 61000-4-29:2000

219 UE 30 EN 61000-4-4:2012

220 UE 36 EN 50598-2:2014/A1:2016

221 UE 39 EN ISO 544:2017

222 UE 52 EN 886:2004

223 UE 59 EN ISO 6103:2014

224 UE 78 EN ISO 15118-2:2016

225 UE 78 EN 15194:2017

226 UE 78 EN 16882:2016

227 UE 78 EN ISO 18246:2017

228 UE 95 EN ISO 10273:2017

229 UE 95 EN ISO 11290-2:2017

230 UE 95 EN ISO 16654:2001/A1:2017

231 UE 95 EN ISO 18465:2017

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

Documents relevant to EN 301 549 "Accessibility requirements suitable for public procurement of ICT products and services in Europe"

Guidelines on the use of accessibility award criteria suitable for public procurement of ICT products and services in Europe

Guidance for the application of conformity assessment to accessibility requirements for public procurement of ICT products and services in Europe

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters

Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)

Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate

Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014)

Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014)

Cycles - Electrically power assisted cycles - EPAC Bicycles

Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures

Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015)

Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO 10273:2017)

Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method (ISO 11290-2:2017)

Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 - Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/Amd 1:2017)

Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017)

232 UE 95 EN ISO 19020:2017

233 UE 95 EN ISO 21528-1:2017

234 UE 95 EN ISO 21528-2:2017

235 UE 95 EN ISO 21872-1:2017

236 UE 95 EN ISO 22964:2017

237 UE 108 EN 513:1999

238 UE 108 EN 917:1997

239 UE 108 EN 1120:1996

240 UE 108 EN 1228:1996

241 UE 108 EN 1277:2003

242 UE 108 EN 1393:1996

243 UE 108 EN 1394:1996

Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017)

Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017)

Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique (ISO 21528-2:2017)

Microbiology of the food chain - Horizontal method for the determination of Vibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO 21872-1:2017)

Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017)

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering

Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength

244 UE 108 EN ISO 9080:2012

245 UE 108 EN ISO 13968:2008

246 UE 108 EN 14830:2006

247 UE 108 CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content

248 UE 108 CEN/TS 16398:2012

249 UE 108 EN ISO 16871:2003

250 UE 109 EN 1434-2:2015 Heat meters - Part 2: Constructional requirements251 UE 113 CEN/TR 16220:2011

252 UE 113 EN 16516:2017

253 UE 113 CEN/TS 16637-3:2016

254 UE 113 CEN/TR 17105:2017

255 UE 113 CEN/TR 17113:2017

256 UE 118 EN 14322:2017

257 UE 118 EN 14323:2017

258 UE 118 EN 14354:2017 Wood-based panels - Wood veneer floor coverings

259 UE 118 CEN/TS 14966:2005

260 UE 122 EN 12150-1:2015

261 UE 122 EN 13541:2012

262 UE 122 EN 15682-1:2013

263 UE 146 EN 13146-1:2012+A1:2014

264 UE 146 EN 13146-4:2012+A1:2014

265 UE 146 EN 15839:2012+A1:2015

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)

Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)

Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet

Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)

Construction products - Assessment of release of dangerous substances - Complement to sampling

Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air

Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test

Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products

Construction products - Assessment of release of dangerous substances - Radiation from construction products - Dose assessment of emitted gamma radiation

Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification

Wood-based panels - Melamine faced boards for interior uses - Test methods

Wood-based panels - Small scale indicative test methods for certain mechanical properties

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description

Glass in building - Security glazing - Testing and classification of resistance against explosion pressure

Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description

Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint

Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading

Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces

266 UE 159 EN 50200:2015

267 UE 159 EN 50577:2015

268 UE 160 EN 50288-12-1:2017

269 UE 162 EN 60664-3:2017

270 UE 167 EN 50160:2010/A1:2015

271 UE 217 EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)

272 UE 238 CLC/TS 50594:2015

273 UE 238 EN 50597:2015 Energy Consumption of Vending Machines274 UE 270 EN 14045:2003

275 UE 270 EN ISO 16106:2006

276 UE 326 EN 14081-3:2012+A1:2017

277 UE 333 EN 61851-21-1:2017

278 UE 335 EN 15651-5:2017

279 UE 345 EN 15509:2014

280 UE 345 EN ISO 24534-1:2010

281 UE 345 EN ISO 24534-2:2010

282 UE 347 EN 772-5:2016

Method of test for resistance to fire of unprotected small cables for use in emergency circuits

Electric cables - Fire resistance test for unprotected electric cables (P classification)

Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

Voltage characteristics of electricity supplied by public electricity networks

Tumble dryers for commercial use - Methods for measuring the performance

Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions

Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006)

Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control

Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling

Electronic fee collection - Interoperability application profile for DSRC

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)

Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units

283 UE 347 EN 772-5:2016/AC:2017

284 UE 360 CEN/TR 15310-1:2006

285 UE 360 CEN/TR 15310-2:2006

286 UE 360 CEN/TR 15310-3:2006

287 UE 360 CEN/TR 15310-4:2006

288 UE 360 CEN/TR 15310-5:2006

289 UE 360 EN 15408:2011

290 UE 360 EN 15410:2011

291 UE 360 EN 15411:2011

292 UE 360 EN 15413:2011

293 UE 360 EN 15443:2011

294 UE 360 EN 15936:2012

295 UE 360 EN 16167:2012

296 UE 373 EN ISO 2603:2016

297 UE 373 EN ISO 4043:2016

298 UE 373 EN ISO 20108:2017

299 UE 373 EN ISO 20109:2016

300 UE 373 CEN/TS 99001:2008

301 UE 377 ENV 737-6:2003

302 UE 377 EN 1865-3:2012+A1:2015

Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units

Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions

Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques

Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field

Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery

Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan

Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content

Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)

Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)

Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

Solid recovered fuels - Methods for the preparation of the laboratory sample

Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion

Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)

Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016)

Simultaneous interpreting - Mobile booths - Requirements (ISO 4043:2016)

Simultaneous interpreting - Quality and transmission of sound and image input - Requirements (ISO 20108:2017)

Simultaneous interpreting - Equipment - Requirements (ISO 20109:2016)

Business support - Support services provided to small enterprises - Terminology, quality and performance

Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum

Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher

303 UE 377 EN 13726-3:2003

304 UE 377 EN 13726-4:2003

305 UE 377 EN 13726-6:2003

306 UE 388 CEN/TS 16931-2:2017

307 UE 388 CEN/TS 16931-3-1:2017

308 UE 388 EN 16931-1:2017

Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness

Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability

Non-active medical devices - Test methods for primary wound dressing - Part 6: Odour control

Electronic invoicing - Part 2: List of syntaxes that comply with EN 16931-1

Electronic invoicing - Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice

Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice

TC

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/SS F16

CEN/TC 70

CEN/TC 70

CEN/TC 72

CEN/TC 192

CEN/TC 191

CEN/TC 127

CEN/TC 127

CEN/TC 127

CEN/TC 230

CEN/TC 164

CEN/TC 230

CEN/TC 164

CEN/TC 164

CEN/TC 164

CEN/TC 230

CEN/SS F12

CEN/SS F12

CEN/SS F12

CEN/SS F12

CEN/SS F12

CEN/SS F12

CEN/SS F12

CLC/TC 64

CLC/TC 64

CEN/TC 247

CEN/TC 247

CEN/TC 247

CEN/TC 247

CEN/TC 53

CEN/TC 53

CEN/TC 169

CEN/TC 169

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 89

CEN/TC 107

CEN/TC 107

CEN/TC 107

CEN/TC 156

CEN/TC 156

CEN/TC 312

CEN/TC 228

CEN/TC 228

CEN/TC 228

CEN/TC 228

CEN/TC 228

CEN/TC 156

CEN/TC 312

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 130

CEN/TC 130

CEN/TC 130

CEN/TC 130

CEN/TC 228

CEN/TC 228

CEN/TC 228

CEN/TC 195

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 156

CEN/TC 195

CEN/TC 312

CEN/TC 312

CEN/TC 104

CEN/TC 104

CEN/TC 104

CEN/TC 250

CEN/TC 250

CEN/TC 250

CEN/TC 250

CEN/TC 250

CEN/TC 250

CLC/TC 81X

CEN/TC 341

CLC/SR 36

CLC/SR 104

CLC/SR 104

CLC/SR 104

CLC/SR 104

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/SR 29

CLC/SR 29

CLC/TC 79

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 290

CEN/TC 290

CEN/TC 290

CEN/TC 290

CEN/SS F02

CEN/TC 185

CEN/TC 185

CEN/TC 136

CEN/TC 136

CEN/TC 188

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 237

CEN/TC 237

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/SR 48B

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 13

CEN/TC 247

CEN/TC 269

CEN/TC 269

CEN/TC 269

CEN/TC 57

CEN/TC 57

CEN/TC 123

CEN/TC 123

CEN/TC 123

CEN/TC 123

CEN/TC 123

CEN/TC 123

CEN/TC 123

CEN/TC 23

CEN/TC 23

CEN/TC 23

CEN/TC 23

CLC/TC 59X

CEN/TC 298

CEN/TC 298

CEN/TC 298

CEN/TC 234

CEN/TC 234

CEN/TC 238

CEN/SS N21

CEN/TC 408

CEN/TC 234

CEN/TC 238

CLC/TC 111X

CLC/TC 111X

CLC/TC 111X

CLC/TC 111X

CLC/TC 111X

CEN/TC 137

CEN/TC 264

CEN/TC 264

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 444

CEN/TC 444

CEN/TC 444

CEN/TC 335

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 278

CLC/TC 2

CLC/TC 210

CLC/TC 210

CLC/TC 22X

CEN/TC 121

CEN/TC 164

CEN/TC 143

CEN/TC 301

CEN/TC 333

CEN/TC 301

CEN/TC 301

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/CLC/ETSI/JWG eAcc



CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 249

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 249

CEN/TC 249

CEN/TC 155

CEN/TC 176CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 112

CEN/TC 112

CEN/TC 112

CEN/TC 112

CEN/TC 129

CEN/TC 129

CEN/TC 129

CEN/TC 256

CEN/TC 256

CEN/TC 256

CLC/TC 20

CLC/TC 20

CLC/TC 46X

CLC/SR 109

CLC/TC 8X

CEN/TC 127

CLC/TC 59X

CLC/TC 59XCEN/TC 261

CEN/TC 261

CEN/TC 124

CLC/TC 69X

CEN/TC 349

CEN/TC 278

CEN/TC 278

CEN/TC 278

CEN/TC 125

CEN/TC 125

CEN/TC 292

CEN/TC 292

CEN/TC 292

CEN/TC 292

CEN/TC 292

CEN/TC 343

CEN/TC 343

CEN/TC 343

CEN/TC 343

CEN/TC 343

CEN/TC 444

CEN/TC 444

CEN/SS A07

CEN/SS A07

CEN/SS A07

CEN/SS A07

CEN/TC 374

CEN/TC 215

CEN/TC 239

CEN/TC 205

CEN/TC 205

CEN/TC 205

CEN/TC 434

CEN/TC 434

CEN/TC 434


Standarde europene propuse a se adopta ca standarde române prin publicarea notei de confirmare


1 MADR 95 EN 12014-2:2017

2 MADR 95 EN ISO 12099:2017

3 MADR 95 EN 15510:2017

4 MADR 95 EN 15550:2017

5 MADR 95 EN 15621:2017

6 MADR 95 EN 16939:2017

7 MADR 95 EN 17049:2018

8 MADR 95 EN 17050:2017

9 MADR 95 EN 17053:2018

10 MADR 105 EN 13368-2:2017

11 MADR 180 EN ISO 6571:2009/A1:2017

12 MADR 180 EN ISO 10399:2018

13 MADR 180 EN ISO 11746:2012/A1:2017

Nr crt

Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products

Animal feeding stuffs, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry (ISO 12099:2017)

Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES

Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES

Animal feeding stuffs: Methods of sampling and analysis - Detection of tylosin, spiramycin and virginiamycin - Thin Layer Chromatography and bioautography

Animal feeding stuffs: Methods of sampling and analysis - Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed - Confirmatory analysis by LC-MS

Animal feeding stuffs: Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS

Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)

Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography

Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) - Amendment 1 (ISO 6571:2008/Amd 1:2017)

Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017)

Rice - Determination of biometric characteristics of kernels - Amendment 1 (ISO 11746:2012/Amd 1:2017)

14 MADR 180 EN ISO 21294:2017

15 MADR 285 EN ISO 11504:2017

16 MAI 216 EN 1568-1:2018

17 MAI 216 EN 1568-2:2018

18 MAI 216 EN 1568-4:2018

19 MAI 216 EN 15004-10:2017

20 MAI 216 EN 15004-7:2017

21 MAI 216 EN 15004-8:2017

22 MAI 216 EN 15004-9:2017

23 MAI 216 EN 16750:2017

24 MAI 217 EN 1364-2:2018

25 MAI 217 EN 1634-1:2014+A1:2018

26 MAI 217 EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)

27 MAI 217 EN 15882-1:2011+A1:2017

28 MAP 52 EN 816:2017 Sanitary tapware - Automatic shut-off valves PN 10

29 MAP 52 EN 1111:2017

30 MAP 52 EN 1287:2017

31 MAP 52 EN 1406:2017

32 MAP 52 EN ISO 7393-2:2018

33 MAP 52 EN ISO 9696:2017

Oilseeds - Manual or automatic discontinuous sampling (ISO 21294:2017)

Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO 11504:2017)

Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids

Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids

Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids

Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified)

Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified)

Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified)

Fixed firefighting system - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified)

Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance

Fire resistance tests for non-loadbearing elements - Part 2: Ceilings

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows

Extended application of results from fire resistance tests for service installations - Part 1: Ducts

Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification

Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification

Chemicals used for treatment of water intended for human consumption - Modified starches

Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)

Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)

34 MAP 52 EN 17034:2018

35 MAP 52 EN ISO 19340:2017

36 MCIN 380 EN 15759-2:2018

37 MCIN 380 EN 16893:2018

38 MCSI 6 EN 62802:2017

39 MCSI 6 EN 300 718-1 V2.1.1:2018

40 MCSI 6 EN 300 718-2 V2.1.1:2018

41 MCSI 6 EN 302 054 V2.2.1:2018

42 MCSI 6 EN 303 454 V1.1.1:2018

43 MCSI 6 EN 305 174-1 V1.1.1:2018

44 MCSI 6 EN 305 174-2 V1.1.1:2018

45 MCSI 6 EN 305 174-8 V1.1.1:2018

46 MCSI 6 EN 305 200-2-1 V1.1.1:2018

47 MCSI 6 EN 305 200-3-1 V1.1.1:2018

48 MCSI 30 EN 61000-6-5:2015/AC:2018-01

49 MCSI 138 EN 60793-1-33:2017

Chemicals used for treatment of water intended for human consumption - Aluminium chloride anhydrous, aluminium chloride basic, dialuminium chloride pentahydroxide and aluminium chloride hydroxide sulfate

Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)

Conservation of cultural heritage - Indoor climate - Part 2: Ventilation management for the protection of cultural heritage buildings and collections

Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections

Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) Systems

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard for access to radio spectrum

Short Range Devices (SRD); Metal and object detection sensors in the frequency range 1 kHz to 148,5 kHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic aspects

Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 2: ICT Sites

Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT equipment (ICT waste/end of life)

Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1: ICT Sites

Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT Sites; Sub-part 1: DCEM

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

50 MCSI 138 EN 60793-1-48:2017

51 MCSI 138 EN 60793-2-10:2017

52 MCSI 138 EN IEC 60793-1-45:2018

53 MCSI 138 EN IEC 60793-1-47:2018

54 MCSI 138 EN 60794-2:2017

55 MCSI 138 EN IEC 60794-1-22:2018

56 MCSI 138 EN 60794-1-3:2017

57 MCSI 138 EN 61280-4-4:2017

58 MCSI 138 EN 61745:2017

59 MCSI 138 EN 61753-121-2:2017

60 MCSI 138 EN 61757-2-2:2017

61 MCSI 138 EN IEC 62148-1:2018

62 MCSI 138 EN 62150-5:2017

63 MCSI 138 EN 62343:2017 Dynamic modules - General and guidance

64 MCSI 138 EN 62496-2:2017

65 MCSI 204 EN 419212-2:2017

66 MCSI 204 EN 419212-1:2017

67 MCSI 204 EN 419212-3:2017

68 MCSI 207 EN 50090-3-4:2017

69 MCSI 207 EN 50090-6-1:2017

Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter

Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss

Optical fibre cables - Part 2: Indoor cables - Sectional specification

Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods

Optical fibre cables - Part 1-3: Generic specification - Optical cable elements

Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links

End-face image analysis procedure for the calibration of optical fibre geometry test sets

Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment

Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing

Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance

Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters

Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards

Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services

Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 1: Introduction and common definitions

Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 3: Device authentication protocols

Home and Building Electronic Systems (HBES) - Part 3-4: Secure Application Layer, Secure Service, Secure configuration and security Resources

Home and Building Electronic Systems (HBES) - Part 6-1: Interfaces - Webservice interface

70 MCSI 207 EN 50174-3:2013/A1:2017

71 MCSI 207 EN IEC 63044-3:2018

72 MCSI 220 EN 300 175-1 V2.7.1:2017

73 MCSI 220 EN 300 175-2 V2.7.1:2017

74 MCSI 220 EN 300 175-3 V2.7.1:2017

75 MCSI 220 EN 300 175-4 V2.7.1:2017

76 MCSI 220 EN 300 175-5 V2.7.1:2017

77 MCSI 220 EN 300 175-6 V2.7.1:2017

78 MCSI 220 EN 300 175-7 V2.7.1:2017

79 MCSI 220 EN 300 175-8 V2.7.1:2017

80 MCSI 220 EN 300 176-1 V2.3.1:2018

81 MCSI 220 EN 300 392-3-3 V1.4.1:2017

82 MCSI 220 EN 301 598 V2.1.1:2018

83 MCSI 268 EN 301 001-1 V1.2.2:1998

84 MCSI 268 EN 301 001-2 V1.2.2:1998

85 MCSI 268 EN 301 001-3 V1.1.3:1998

Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech and audio coding and transmission

Digital Enhanced Cordless Telecommunications (DECT); Test specification; Part 1: Radio

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 3: Additional Network Feature Group Call (ANF-ISIGC)

White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user

86 MCSI 268 EN 301 001-4 V1.1.4:1999

87 MCSI 268 EN 301 001-5 V1.1.3:1998

88 MCSI 268 EN 301 001-6 V1.1.4:1999

89 MCSI 268 EN 301 002-4 V1.2.1:2001

90 MCSI 268 EN 301 002-5 V1.2.1:2001

91 MCSI 268 EN 301 002-6 V1.2.1:2001

92 MCSI 268 EN 301 003-1 V1.1.3:1999

93 MCSI 268 EN 301 003-2 V1.1.3:1999

94 MCSI 268 EN 301 004-1 V1.1.3:1998

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network

Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network

Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]

Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection; Part 1: Protocol specification [ITU-T Recommendation Q.2210 (1996), modified]

95 MCSI 268 EN 301 005-1 V1.1.4:1998

96 MCSI 268 EN 301 005-2 V1.1.5:1998

97 MCSI 268 EN 301 006-1 V1.2.3:1998

98 MCSI 268 EN 301 007-1 V1.1.3:1998

99 MCSI 268 EN 301 008 V1.1.2:1998

100 MCSI 269 ETS 300 934 ed5:1998

101 MCSI 269 ETS 300 936 ed1:1997

102 MCSI 269 ETS 300 939 ed2:1997

103 MCSI 269 ETS 300 941 ed1:1997

104 MCSI 269 ETS 300 942 ed2:1997

105 MCSI 269 EN 300 943 V7.0.1:2000

106 MCSI 269 EN 300 944 V8.0.1:2000

107 MCSI 269 EN 300 945 V7.0.3:1999

108 MCSI 269 ETS 300 946 ed7:2000

V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 1: Interface specification

V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Q3 interface at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) subscriber lines; Part 1: Q3 interface specification

Integrated Services Digital Network (ISDN); Signalling System No.7; Operations, Maintenance and Administration Part (OMAP); Part 1: Protocol specification

Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling Connection Control Part (SCCP); Interoperability test specification

Digital cellular telecommunications system (Phase 2+) (GSM); Voice Broadcast Service (VBS); Stage 2 (GSM 03.69 version 5.5.1)

Digital cellular telecommunications system; Layer 1; General requirements (GSM 04.04 version 5.0.1)

Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio interface signalling layer 3; General aspects (GSM 04.07 version 5.2.1)

Digital cellular telecommunications system; Mobile radio interface layer 3; Supplementary services specification; General aspects (GSM 04.10 version 5.0.1)

Digital cellular telecommunications system (Phase 2+) (GSM); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface (GSM 04.11 version 5.2.1)

Digital cellular telecommunications system (Phase 2+) (GSM); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface (GSM 04.12 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Performance requirements on the mobile radio interface (GSM 04.13 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Rate adaption on the Mobile Station - Base Station System (MS - BSS) Interface (GSM 04.21 version 7.0.3 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface (GSM 04.22 version 5.6.1 Release 1996)

109 MCSI 269 EN 300 947 V7.0.1:2000

110 MCSI 269 EN 300 948 V8.0.1:2000

111 MCSI 269 EN 300 949 V8.0.1:2000

112 MCSI 269 ETS 300 950 ed4:1999

113 MCSI 269 EN 300 952 V7.0.2:1999

114 MCSI 269 EN 300 953 V7.0.1:2000

115 MCSI 269 EN 300 954 V7.0.1:2000

116 MCSI 269 EN 300 955 V7.0.1:2000

117 MCSI 269 ETS 300 956 ed2:1998

118 MCSI 269 EN 300 957 V7.0.1:2000

119 MCSI 269 EN 300 958 V7.0.1:2000

120 MCSI 269 EN 300 959 V8.1.2:2001

121 MCSI 269 EN 300 960 V8.0.1:2000

122 MCSI 269 EN 300 961 V8.1.1:2000

123 MCSI 269 EN 300 962 V8.0.1:2000

124 MCSI 269 EN 300 963 V8.0.1:2000

Digital cellular telecommunications system (Phase 2+) (GSM); enhanced Multi-Level Precedence and Pre-emption service (eMLPP); Stage 3 (GSM 04.67 version 7.0.0 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Group Call Control (GCC) protocol (GSM 04.68 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Broadcast Call Control (BCC) protocol (GSM 04.69 version 8.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio interface layer 3 supplementary services specification; Formats and coding (GSM 04.80 version 5.3.1 Release 1996)

Digital cellular telecommunications system (Phase 2+) (GSM); Call Forwarding (CF) supplementary services; Stage 3 (GSM 04.82 version 7.0.2 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting (CW) and Call Hold (HOLD) supplementary services; Stage 3 (GSM 04.83 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Multi Party (MPTY) supplementary services; Stage 3 (GSM 04.84 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Advice of Charge (AoC) supplementary services; Stage 3 (GSM 04.86 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring (CB) supplementary services; Stage 3 (GSM 04.88 version 5.1.0)

Digital cellular telecommunications system (Phase 2+) (GSM); Unstructured Supplementary Service Data (USSD); Stage 3 (GSM 04.90 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Explicit Call Transfer (ECT) supplementary service; Stage 3 (GSM 04.91 version 7.0.1 Release 1998)

Digital cellular telecommunications system (Phase 2+) (GSM); Modulation (GSM 05.04 version 8.1.2 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Processing functions (GSM 06.01 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Transcoding (GSM 06.10 version 8.1.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Substitution and muting of lost frames for full rate speech channels (GSM 06.11 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Comfort noise aspect for full rate speech traffic channels (GSM 06.12 version 8.0.1 Release 1999)

125 MCSI 269 EN 300 964 V8.0.1:2000

126 MCSI 269 EN 300 965 V8.0.1:2000

127 MCSI 269 EN 300 966 V8.0.1:2000

128 MCSI 269 EN 300 967 V8.0.1:2000

129 MCSI 269 EN 300 968 V8.0.1:2000

130 MCSI 269 EN 300 969 V8.0.1:2000

131 MCSI 269 EN 300 970 V8.0.1:2000

132 MCSI 269 EN 300 971 V8.0.1:2000

133 MCSI 269 EN 300 972 V8.0.1:2000

134 MCSI 269 EN 300 973 V8.0.1:2000

135 MCSI 269 ETS 300 974 ed11:2000

136 MCSI 269 ETS 300 975 ed1:1997

137 MCSI 269 ETS 300 976 ed9:2000

138 MCSI 269 ETS 300 977 ed5:1998

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Discontinuous Transmission (DTX) for full rate speech traffic channels (GSM 06.31 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Voice Activity Detector (VAD) for full rate speech traffic channels (GSM 06.32 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Half rate speech processing functions (GSM 06.02 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; ANSI-C code for the GSM half rate speech codec (GSM 06.06 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Test sequences for the GSM half rate speech codec (GSM 06.07 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Half rate speech transcoding (GSM 06.20 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Substitution and muting of lost frames for half rate speech traffic channels (GSM 06.21 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Comfort noise aspects for the half rate speech traffic channels (GSM 06.22 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Discontinuous Transmission (DTX) for half rate speech traffic channels (GSM 06.41 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Voice Activity Detector (VAD) for half rate speech traffic channels (GSM 06.42 version 8.0.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Application Part (MAP) specification (GSM 09.02 version 5.15.1 Release 1996)

Digital cellular telecommunications system (Phase 2+) (GSM); Interworking between a Public Land Mobile Network (PLMN)and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services (GSM 09.06 version 5.0.2)

Digital cellular telecommunications system (Phase 2+) (GSM); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN) (GSM 09.07 version 5.10.1 Release 1996)

Digital cellular telecommunications system (Phase 2+) (GSM); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface (GSM 11.11 version 5.10.1 Release 1996)

139 MCSI 269 EN 300 979 V8.0.1:2000

140 MCSI 269 EN 303 980 V1.1.1:2017

141 MCSI 279 EN 50360:2017

142 MCSI 279 EN 50385:2017

143 MCSI 279 EN 50401:2017

144 MCSI 279 EN 50566:2017

145 MCSI 319 EN ISO 11073-10101:2005/A1:2017

146 MCSI 319 EN ISO 11073-10424:2016/AC:2018

147 MCSI 319 EN ISO 11615:2017

148 MCSI 319 EN ISO 11616:2017

149 MCSI 319 EN ISO 12052:2017

150 MCSI 375 EN 60728-13-1:2017

151 MCSI 375 EN IEC 60728-3:2018

Digital cellular telecommunications system (Phase 2+) (GSM); In-band control of remote transcoders and rate adaptors for half rate traffic channels (GSM 08.61 version 8.0.1 Release 1999)

Satellite Earth Stations and Systems (SES); Harmonised Standard for fixed and in-motion Earth Stations communicating with non-geostationary satellite systems (NEST) in the 11 GHz to 14 GHz frequency bands covering essential requirements of article 3.2 of Directive 2014/53/EU

Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service

Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body

Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature - Amendment 1: Additional definitions (ISO/IEEE 11073-10101:2004/Amd 1:2017)

Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) - Technical Corrigendum 1 (ISO/IEEE 11073-10424:2016/Cor 1:2018)

Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO 11615:2017)

Health informatics - Identification of medicinal products - Data elements and structures for the Unique Identification and Exchange of regulated Pharmaceutical Product Information (ISO 11616:2017)

Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2017)

Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system

Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)

152 MCSI 375 EN IEC 61938:2018

153 MCSI 375 EN 62680-1-3:2017

154 MCSI 375 EN 62827-2:2017

155 MCSI 375 EN IEC 62919:2018

156 MCSI 375 EN 63005-1:2017

157 MCSI 375 EN 63028:2017

158 MCSI 375 EN 63029:2017

159 MCSI 375 EN 63029:2017/AC:2018-02

160 MCSI 375 EN 63035:2017

161 MCSI 375 EN 63080:2017 Accessibility terms and definitions

162 MCSI 379 EN 14615:2017

163 MCSI 379 EN ISO 19160-4:2017

164 111 EN 13639:2017 Determination of total organic carbon in limestone

165 113 EN 12691:2018

166 113 EN 13467:2018

167 113 EN 16516:2017

168 115 EN 12440:2017 Natural stone - Denomination criteria

169 115 EN 14157:2017

170 136 HD 60364-1:2008/A11:2017

171 136 HD 60364-4-41:2007/A11:2017

172 136 HD 60364-4-41:2017/A11:2017

173 136 HD 60364-5-51:2009/A12:2017

Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability

Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification

Wireless power transfer - Management - Part 2: Multiple device control management

Content management - Monitoring and management of personal digital content

Event video data recorder for road vehicle accidents - Part 1: Basic requirements

Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS)

Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books

Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books

MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015)

Postal services - Digital postage marks - Applications, security and design

Addressing - Part 4: International postal address components and template language (ISO 19160-4:2017)

MDRAPFE

MDRAPFE

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact

MDRAPFE

Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation

MDRAPFE

Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air

MDRAPFE

MDRAPFE

Natural stone test methods - Determination of the abrasion resistance

MDRAPFE

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

MDRAPFE

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

MDRAPFE

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

MDRAPFE

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

174 136 HD 60364-5-52:2011/A11:2017

175 136 HD 60364-5-53:2015/A11:2017

176 136 HD 60364-5-54:2011/A11:2017

177 136 HD 60364-5-559:2012/A11:2017

178 136 HD 60364-5-56:2010/A12:2017

179 136 HD 60364-7-701:2007/A12:2017

180 136 HD 60364-7-704:2007/A11:2017

181 136 HD 60364-7-705:2007/A12:2017

182 136 HD 60364-7-709:2009/A11:2017

183 136 HD 60364-7-715:2012/A11:2017

184 136 HD 60364-7-718:2013/A12:2017

185 136 HD 60364-7-729:2009/A11:2017

186 136 HD 60364-7-740:2006/A11:2017

187 136 HD 60364-7-708:2017

188 136 HD 60364-7-718:2013/A11:2017

189 186 EN 16933-2:2017

190 186 EN 16941-1:2018

191 187 EN 1436:2018

192 187 EN 1794-1:2018

193 187 EN 12675:2017

194 187 EN 12697-10:2017

MDRAPFE

Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

MDRAPFE

Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear

MDRAPFE

Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

MDRAPFE

Low-voltage electrical installations - Part 5-559: Selection and erection of electrical equipment - Luminaires and lighting installations

MDRAPFE

Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

MDRAPFE

Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

MDRAPFE

Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

MDRAPFE

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

MDRAPFE

Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations

MDRAPFE

Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations

MDRAPFE

Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces

MDRAPFE

Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

MDRAPFE

Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses

MDRAPFE

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

MDRAPFE

Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces

MDRAPFE

Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design

MDRAPFE

On-site non-potable water systems - Part 1: Systems for the use of rainwater

MDRAPFE

Road marking materials - Road marking performance for road users and test methods

MDRAPFE

Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements

MDRAPFE

Traffic signal controllers - Functional safety requirements

MDRAPFE

Bituminous mixtures - Test methods - Part 10: Compactability

195 187 EN 12697-13:2017

196 187 EN 12697-23:2017

197 187 EN 13303:2017

198 187 EN 13398:2017

199 187 EN 13399:2017

200 187 EN 13588:2017

201 240 EN 13032-2:2017

202 276 EN ISO 3822-3:2018

203 276 EN ISO 10848-1:2017

204 276 EN ISO 10848-2:2017

205 276 EN ISO 10848-3:2017

206 276 EN ISO 10848-4:2017

207 276 EN ISO 12354-1:2017

208 276 EN ISO 12354-2:2017

209 276 EN ISO 12354-3:2017

210 276 EN ISO 12354-4:2017

MDRAPFE

Bituminous mixtures - Test methods - Part 13: Temperature measurement

MDRAPFE

Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens

MDRAPFE

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

MDRAPFE

Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen

MDRAPFE

Bitumen and bituminous binders - Determination of storage stability of modified bitumen

MDRAPFE

Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

MDRAPFE

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places

MDRAPFE

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)

MDRAPFE

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)

MDRAPFE

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)

MDRAPFE

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)

MDRAPFE

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017)

MDRAPFE

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)

MDRAPFE

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017)

MDRAPFE

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017)

MDRAPFE

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017)

211 276 EN ISO 16283-1:2014/A1:2017

212 281 EN ISO 12569:2017

213 302 EN ISO 5801:2017

214 302 EN ISO 9806:2017

215 318 EN 12604:2017

216 318 EN 13126-8:2017

217 318 EN 16864:2017

218 321 EN 1504-10:2017

219 324 EN 14041:2018

220 335 EN ISO 8394-2:2017

221 335 EN 15643-5:2017

222 335 EN ISO 29481-1:2017

223 343 EN 1993-1-5:2006/A1:2017

224 343 EN 1993-1-6:2007/A1:2017

225 343 EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos

226 343 EN 1993-4-2:2007/A1:2017

227 346 EN 62561-4:2017

228 346 EN 62561-5:2017

229 361 EN ISO 14688-1:2018

230 361 EN ISO 14688-2:2018

231 361 EN ISO 14689:2018

MDRAPFE

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation - Amendment 1 (ISO 16283-1:2014/Amd 1:2017)

MDRAPFE

Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)

MDRAPFE

Fans - Performance testing using standardized airways (ISO 5801:2017)

MDRAPFE

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)

MDRAPFE

Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods

MDRAPFE

Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware

MDRAPFE

Building hardware - Mechatronic padlocks - Requirements and test methods

MDRAPFE

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

MDRAPFE

Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics

MDRAPFE

Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)

MDRAPFE

Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works

MDRAPFE

Building information models - Information delivery manual - Part 1: Methodology and format (ISO 29481-1:2016)

MDRAPFE

Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements

MDRAPFE

Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures

MDRAPFE

MDRAPFE

Eurocode 3 - Design of steel structures - Part 4-2: Tanks

MDRAPFE

Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners

MDRAPFE

Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals

MDRAPFE

Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017)

MDRAPFE

Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017)

MDRAPFE

Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017)

232 361 EN ISO 17892-7:2018

233 361 EN ISO 18674-3:2017

234 361 EN ISO 22476-10:2017

235 ME 2 EN 60445:2017

236 ME 2 EN 61360-1:2017

237 ME 2 EN 62569-1:2017

238 ME 2 EN 62656-5:2017

239 ME 3 EN 50588-1:2017

240 ME 3 EN 50629:2015/A2:2018

241 ME 5 EN 60674-2:2017/AC:2018-01

242 ME 5 EN IEC 60893-3-6:2004/A2:2018

243 ME 5 EN IEC 62677-1:2018

244 ME 5 EN IEC 62677-2:2018

245 ME 8 EN 62271-1:2017

246 ME 8 EN 62271-100:2009/A2:2017

247 ME 8 EN IEC 62271-110:2018

248 ME 8 EN 62689-2:2017

249 ME 9 EN 60947-2:2017

250 ME 9 EN 60947-5-1:2017

251 ME 9 EN 62683-1:2017

252 ME 11 EN 60669-1:2018

253 ME 11 EN 61242:1997/A13:2017

254 ME 11 EN 62606:2013/A1:2017 General requirements for arc fault detection devices

MDRAPFE

Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017)

MDRAPFE

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers (ISO 18674-3:2017)

MDRAPFE

Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)

Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors

Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods

Generic specification of information on products by properties - Part 1: Principles and method

Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

Energy performance of large power transformers (Um > 36 kV or Sr ? 40 MVA)

Specification for plastic films for electrical purposes - Part 2: Methods of test

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements

Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear

High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers

High-voltage switchgear and controlgear - Part 110: Inductive load switching

Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 2: System aspects

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data

Switches for household and similar fixed electrical installations - Part 1: General requirements

Electrical accessories - Cable reels for household and similar purposes

255 ME 15 EN 50180-3:2015/A1:2017

256 ME 15 EN 60137:2017

257 ME 16 EN ISO 15382:2017

258 ME 16 EN ISO 15651:2017

259 ME 16 EN ISO 16424:2017

260 ME 16 EN ISO 16638-1:2017

261 ME 16 EN ISO 17099:2017

262 ME 16 EN ISO 18589-2:2017

263 ME 16 EN ISO 18589-3:2017

264 ME 16 EN ISO 19017:2017

265 ME 16 EN ISO 19238:2017

266 ME 16 EN ISO 20553:2017

267 ME 16 EN ISO 20785-1:2017

268 ME 16 EN ISO 20785-2:2017

269 ME 16 EN ISO 20785-3:2017

270 ME 16 EN ISO 21483:2017

271 ME 16 EN ISO 21613:2017

272 ME 16 EN ISO 29661:2017

Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations

Insulated bushings for alternating voltages above 1 000 V

Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities (ISO 15382:2015)

Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method (ISO 15651:2015)

Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012)

Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015)

Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014)

Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2015)

Measurement of radioactivity in the environment - Soil - Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry (ISO 18589-3:2015, Corrected version 2015-12-01)

Guidance for gamma spectrometry measurement of radioactive waste (ISO 19017:2015)

Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)

Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006)

Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2012)

Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)

Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015)

Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 (ISO 21483:2013)

(U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine (ISO 21613:2015)

Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015)

273 ME 16 EN 60780-323:2017

274 ME 16 EN 61577-2:2017

275 ME 16 EN 62765-1:2017

276 ME 17 EN 60747-16-3:2002/A2:2017

277 ME 17 EN 60747-16-4:2004/A2:2017

278 ME 17 EN 60749-43:2017

279 ME 17 EN 60749-5:2017

280 ME 17 EN IEC 62969-1:2018

281 ME 18 EN 60679-1:2017

282 ME 18 EN 62884-1:2017

283 ME 18 EN 62884-2:2017

284 ME 19 EN 50625-2-3:2017

285 ME 19 EN 50625-2-4:2017

286 ME 19 EN IEC 60068-2-52:2018

287 ME 19 EN 62321-4:2014/A1:2017

288 ME 21 EN 60317-0-7:2017

289 ME 21 EN 60317-56:2017

290 ME 21 EN 60317-0-10:2017

Nuclear facilities - Electrical equipment important to safety - Qualification

Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments

Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters

Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters

Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches

Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans

Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test

Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors

Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification

Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement

Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method

Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC

Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels

Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)

Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire

Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180

Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire

291 ME 21 EN 60317-70:2017

292 ME 21 EN 60317-71:2017

293 ME 21 EN 60317-72:2017

294 ME 23 EN 61326-3-1:2017

295 ME 23 EN 61511-1:2017/A1:2017

296 ME 23 EN 61784-3:2016/A1:2017

297 ME 23 EN 61784-3-13:2017

298 ME 23 EN 61784-3-17:2017

299 ME 23 EN 61784-3-2:2017

300 ME 23 EN 61784-3-3:2017

301 ME 23 EN 61784-3-8:2017

302 ME 23 EN 61987-24-2:2017

303 ME 23 EN 61987-24-3:2017

304 ME 23 EN 62439-1:2010/A2:2017

305 ME 23 EN 62439-2:2017

Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155

Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180

Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications

Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) - Part 1: Framework, definitions, system, hardware and software requirements

Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions

Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13





Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange

Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods

Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP)

306 ME 23 EN IEC 62439-3:2018

307 ME 23 EN IEC 62439-5:2018

308 ME 23 EN 62453-301:2009/A1:2017

309 ME 23 EN 62453-302:2017

310 ME 23 EN 62453-303-2:2009/A1:2017

311 ME 23 EN 62453-309:2017

312 ME 23 EN 62453-315:2009/A1:2017

313 ME 23 EN IEC 62453-303-1:2009/A1:2018

314 ME 23 EN 62657-1:2017

315 ME 23 EN 62657-2:2017

316 ME 23 EN IEC 62828-1:2018

317 ME 23 EN IEC 62828-2:2018

318 ME 23 EN 62948:2017

319 ME 23 EN 62952-3:2017

320 ME 26 EN IEC 60118-4:2015/A1:2018

321 ME 26 EN 60645-1:2017

322 ME 26 EN 61252:1995/A2:2017

323 ME 26 EN 61260-2:2016/A1:2017

324 ME 26 EN 61391-1:2006/A1:2017

325 ME 26 EN 61672-2:2013/A1:2017

Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)

Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP)

Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1


Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6



Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2

Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations

Industrial communication networks - Wireless communication networks - Part 2: Coexistence management

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters

Industrial networks - Wireless communication network and communication profiles - WIA-FA

Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module

Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements

Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry

Electroacoustics - Specifications for personal sound exposure meters

Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests

Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response

Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests

326 ME 26 EN 62359:2011/A1:2018

327 ME 26 EN 62489-1:2010/A2:2018

328 ME 27 EN 50131-2-2:2017

329 ME 27 EN 50131-6:2017

330 ME 27 EN 50134-2:2017

331 ME 27 EN 50398-1:2017

332 ME 27 EN 62820-1-2:2017

333 ME 27 EN IEC 62820-2:2018

334 ME 30 EN 55016-1-2:2014/A1:2018

335 ME 30 EN 55016-2-1:2014/A1:2017

336 ME 30 EN 61000-2-2:2002/A1:2017

337 ME 30 EN 61000-4-12:2017

338 ME 30 EN 61000-4-5:2014/A1:2017

339 ME 30 EN 61000-4-11:2004/A1:2017

340 ME 31 EN IEC 60519-12:2018

341 ME 33 EN 60695-11-2:2017

342 ME 34 EN 61788-22-1:2017

343 ME 35 EN 50380:2017

344 ME 35 EN 60904-1-1:2017

Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components

Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors

Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies

Alarm systems - Social alarm systems - Part 2: Trigger devices

Alarm systems - Combined and integrated alarm systems - Part 1: General requirements

Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP)

Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors

Marking and documentation requirements for Photovoltaic Modules

Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices

345 ME 35 EN 60904-8-1:2017

346 ME 35 EN 61400-25-1:2017

347 ME 35 EN 61400-25-5:2017

348 ME 35 EN IEC 62688:2018

349 ME 35 EN 62805-1:2017

350 ME 35 EN 62805-2:2017

351 ME 35 EN 62817:2015/A1:2017

352 ME 35 EN 62920:2017

353 ME 35 EN 62979:2017

354 ME 36 EN 61954:2011/A2:2017

355 ME 36 EN 62501:2009/A2:2017

356 ME 36 EN IEC 62909-1:2018

357 ME 36 EN 62927:2017

358 ME 36 EN 62927:2017/AC:2018-01

359 ME 39 EN ISO 2063-1:2017

360 ME 39 EN ISO 2063-2:2017

361 ME 39 EN ISO 5175-1:2017

362 ME 39 EN ISO 5175-2:2017

363 ME 39 EN ISO 9017:2018

364 ME 39 EN ISO 9455-11:2017

Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices

Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models

Wind energy generation systems - Part 25-5: Communications for monitoring and control of wind power plants - Compliance testing

Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification

Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze

Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance

Photovoltaic systems - Design qualification of solar trackers

Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment

Photovoltaic module - Bypass diode - Thermal runaway test

Static VAR compensators (SVC) - Testing of thyristor valves

Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing

Bi-directional grid-connected power converters - Part 1: General requirements

Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing

Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing

Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)

Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)

Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017)

Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017)

Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017)

Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)

365 ME 39 EN ISO 9455-13:2017

366 ME 39 EN ISO 9455-14:2017

367 ME 39 EN ISO 9455-15:2017

368 ME 39 EN ISO 10675-2:2017

369 ME 39 EN ISO 11666:2018

370 ME 39 EN ISO 13916:2017

371 ME 39 EN ISO 13918:2018

372 ME 39 EN ISO 14114:2018

373 ME 39 EN ISO 15011-4:2018

374 ME 39 EN ISO 15296:2018 Gas welding equipment - Vocabulary (ISO 15296:2017)

375 ME 39 EN ISO 15653:2018

376 ME 39 EN ISO 17633:2018

377 ME 39 EN ISO 17640:2017

378 ME 39 EN ISO 17836:2017

379 ME 39 EN ISO 18278-3:2017

380 ME 39 EN ISO 22825:2017

381 ME 39 EN ISO 22829:2017

382 ME 39 EN ISO 26304:2018

383 ME 40 EN ISO 16371-2:2017

384 ME 40 EN ISO 18563-2:2017

385 ME 40 EN ISO 20485:2018

Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)

Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)

Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)

Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)

Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)

Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)

Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)

Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)

Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017)

Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)

Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)

Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)

Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017)

Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017)

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)

Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)

386 ME 40 EN ISO 20486:2018

387 ME 42 EN ISO 3887:2018

388 ME 42 EN ISO 4545-4:2018

389 ME 46 EN ISO 3927:2017

390 ME 46 EN ISO 4492:2017

391 ME 46 EN ISO 4496:2017

392 ME 46 EN ISO 5754:2017

393 ME 47 EN ISO 945-1:2018

394 ME 47 EN 12438:2017

395 ME 47 EN 12681-1:2017

396 ME 47 EN 12681-2:2017

397 ME 55 EN ISO 6412-1:2018

398 ME 55 EN ISO 6412-2:2018

399 ME 55 EN ISO 6412-3:2018

400 ME 55 EN ISO 13567-1:2017

401 ME 55 EN ISO 13567-2:2017

402 ME 56 EN ISO 15378:2017

403 ME 58 EN ISO 14253-1:2017

404 ME 58 EN ISO 17450-4:2018

405 ME 58 EN ISO 25178-71:2017

406 ME 59 EN ISO 16228:2018

Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)

Steels - Determination of the depth of decarburization (ISO 3887:2017)

Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)

Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)

Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)

Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)

Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017)

Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017)

Magnesium and magnesium alloys - Magnesium alloys for cast anodes

Founding - Radiographic testing - Part 1: Film techniques

Founding - Radiographic testing - Part 2: Techniques with digital detectors

Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)

Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)

Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)

Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017)

Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:2017)

Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)

Fasteners - Types of inspection documents (ISO 16228:2017)

407 ME 66 EN 748:2013+A1:2018

408 ME 66 EN 1069-1:2017

409 ME 66 EN 1069-2:2017 Water slides - Part 2: Instructions

410 ME 66 EN 1176-1:2017

411 ME 66 EN 1176-2:2017

412 ME 66 EN 1176-3:2017

413 ME 66 EN 1176-4:2017

414 ME 66 EN 1176-6:2017

415 ME 66 EN 1177:2018

416 ME 66 EN 1651:2018

417 ME 66 EN 16579:2018

418 ME 66 EN 16869:2017 Design/construction of Via Ferratas

419 ME 66 EN 16869:2017/AC:2018 Design/construction of Via Ferratas

420 ME 66 EN ISO 20380:2017

421 ME 66 EN ISO 20957-10:2017

422 ME 66 EN ISO 20957-8:2017

423 ME 66 EN ISO 23537-1:2016/A1:2018

424 ME 66 EN ISO 25649-1:2017

425 ME 66 EN ISO 25649-2:2017

Playing field equipment - Football goals - Functional and safety requirements, test methods

Water slides - Part 1: Safety requirements and test methods

Playground equipment and surfacing - Part 1: General safety requirements and test methods

Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings

Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides

Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways

Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment

Impact attenuating playground surfacing - Methods of test for determination of impact attenuation

Paragliding equipment - Harnesses - Safety requirements and strength tests

Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods

Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)

Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)

Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)

Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018)

Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)

Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017)

426 ME 66 EN ISO 25649-3:2017

427 ME 66 EN ISO 25649-4:2017

428 ME 66 EN ISO 25649-5:2017

429 ME 66 EN ISO 25649-6:2017

430 ME 66 EN ISO 25649-7:2017

431 ME 77 EN 16944:2017

432 ME 78 EN 1646-1:2018

433 ME 78 EN 1648-1:2018

434 ME 78 EN 1648-2:2018

435 ME 78 EN ISO 14469:2017

436 ME 78 EN 15194:2017

437 ME 78 EN ISO 18541-6:2018

438 ME 85 EN 1907:2017

439 ME 88 EN 131-3:2018 Ladders - Part 3: Marking and user instructions

440 ME 89 EN 593:2017

441 ME 89 EN 736-1:2018

442 ME 89 EN 12627:2017 Industrial valves - Butt welding ends for steel valves

443 ME 102 EN ISO 17231:2017

444 ME 102 EN ISO 20536:2017

445 ME 102 EN ISO 20701:2018

446 ME 103 EN ISO 105-B03:2017

Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017)

Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017)

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)

Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017)

Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements

Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans

Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017)

Cycles - Electrically power assisted cycles - EPAC Bicycles

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018)

Safety requirements for cableway installations designed to carry persons - Terminology

Industrial valves - Metallic butterfly valves for general purposes

Valves - Terminology - Part 1: Definition of types of valves

Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017)

Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials (ISO 20536:2017)

Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017)

Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017)

447 ME 103 EN ISO 1107:2017

448 ME 103 EN ISO 1833-11:2017

449 ME 103 EN ISO 1833-4:2017

450 ME 103 EN ISO 1833-7:2017

451 ME 103 EN ISO 2411:2017

452 ME 103 EN ISO 3175-1:2018

453 ME 103 EN ISO 3175-2:2018

454 ME 103 EN ISO 3175-3:2018

455 ME 103 EN ISO 6179:2017

456 ME 103 EN ISO 12138:2018

457 ME 103 EN 13402-3:2017

458 ME 103 EN ISO 15797:2018

459 ME 105 EN 13368-3:2017

460 ME 105 EN 14069:2017

461 ME 105 EN 16962:2018

462 ME 105 EN 16963:2018

463 ME 105 EN 16964:2018

464 ME 105 EN 16965:2018

465 ME 106 EN ISO 14644-15:2017

Fishing nets - Netting - Basic terms and definitions (ISO 1107:2017)

Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) (ISO 1833-11:2017)

Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) (ISO 1833-4:2017)

Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide with certain other fibres (method using formic acid) (ISO 1833-7:2017)

Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017)

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2017)

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2017)

Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)

Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:2017)

Size designation of clothes - Part 3: Size labelling based on body measurements and intervals

Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2017)

Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 3: Determination of [S,S]-EDDS by ion pair chromatography

Liming materials - Denominations, specifications and labelling

Fertilizers - Extraction of water soluble micro-nutrients in fertilizers and removal of organic compounds from fertilizer extracts

Fertilizers - Determination of boron, cobalt, copper, iron, manganese, molybdenum and zinc using ICP-AES

Fertilizers - Extraction of total micro-nutrients in fertilizers using aqua regia

Fertilizers - Determination of cobalt, copper, iron, manganese and zinc using flame atomic absorption spectrometry (FAAS)

Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO 14644-15:2017)

466 ME 106 EN ISO 14644-13:2017

467 ME 108 EN ISO 294-5:2017

468 ME 108 EN 438-9:2017

469 ME 108 EN 477:2018

470 ME 108 EN 478:2018

471 ME 108 EN 479:2018

472 ME 108 EN 514:2018

473 ME 108 EN ISO 899-1:2017

474 ME 108 EN 1451-1:2017

475 ME 108 EN ISO 1825:2017

476 ME 108 EN 1852-1:2018

477 ME 108 EN ISO 2507-1:2017

478 ME 108 EN ISO 2507-2:2017

479 ME 108 EN ISO 2507-3:2017

480 ME 108 EN ISO 3127:2017

481 ME 108 EN ISO 8028:2018

482 ME 108 EN ISO 9852:2017

Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017)

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints

Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)

Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)

Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)

483 ME 108 EN ISO 10210:2017

484 ME 108 EN ISO 10350-1:2017

485 ME 108 EN ISO 10619-1:2018

486 ME 108 EN ISO 10619-2:2018

487 ME 108 EN ISO 10960:2018

488 ME 108 EN ISO 11173:2017

489 ME 108 EN ISO 11295:2017

490 ME 108 EN ISO 11296-2:2018

491 ME 108 EN ISO 11296-4:2018

492 ME 108 EN ISO 11297-2:2018

493 ME 108 EN ISO 11297-4:2018

494 ME 108 EN ISO 11298-2:2018

495 ME 108 EN 13207:2018

496 ME 108 EN ISO 13254:2017

497 ME 108 EN ISO 13255:2017

498 ME 108 EN ISO 13257:2017

499 ME 108 EN ISO 13260:2011/A1:2017

Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)

Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)

Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)

Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)

Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017)

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)

Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)

Plastics - Thermoplastic silage films and tubes for use in agriculture

Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)

Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)

500 ME 108 EN ISO 13262:2017

501 ME 108 EN ISO 13263:2017

502 ME 108 EN ISO 13264:2017

503 ME 108 EN 13655:2018

504 ME 108 EN ISO 14853:2017

505 ME 108 EN 14932:2018

506 ME 108 EN 15534-1:2014+A1:2017

507 ME 108 EN 15534-6:2015+A1:2017

508 ME 108 EN ISO 15985:2017

509 ME 108 EN 17033:2018

510 ME 108 EN 17098-1:2018

511 ME 108 EN 17098-2:2018

512 ME 108 EN ISO 18830:2017

513 ME 108 EN ISO 19679:2017

514 ME 108 EN ISO 20029-1:2018

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)

Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture

Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016)

Plastics - Thermoplastic stretch films for wrapping silage bales

Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products

Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements

Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)

Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods

Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films

Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016)

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2016)

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017)

515 ME 108 EN ISO 20029-2:2018

516 ME 108 EN ISO 22007-1:2017

517 ME 108 EN ISO 22007-4:2017

518 ME 108 EN ISO 28017:2018

519 ME 109 EN ISO 6416:2017

520 ME 109 EN 12480:2018 Gas meters - Rotary displacement gas meters

521 ME 118 EN 847-1:2017

522 ME 118 EN 847-2:2017

523 ME 118 EN 1116:2018

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)

Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)

Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades

Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades

Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances

524 ME 118 EN 1309-3:2018

525 ME 118 EN 13227:2017 Wood flooring - Solid lamparquet products

526 ME 118 EN 13489:2017

527 ME 118 EN 14298:2017 Sawn timber - Assessment of drying quality

528 ME 118 EN 16121:2013+A1:2017

529 ME 118 EN 16755:2017

530 ME 119 EN ISO 18753:2017

531 ME 125 EN 71-7:2014+A2:2018

532 ME 125 EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use

533 ME 125 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use

534 ME 125 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements

535 ME 125 EN 71-7:2014+A1:2017

Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations

Wood-flooring and parquet - Multi-layer parquet elements

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)

Safety of toys - Part 7: Finger paints - Requirements and test methods

Safety of toys - Part 7: Finger paints - Requirements and test methods

536 ME 128 EN 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability

537 ME 128 EN 61810-2-1:2017

538 ME 129 EN IEC 62822-3:2018

539 ME 131 EN 60061-1:1993/A56:2017

540 ME 131 EN 60061-1:1993/A56:2017/AC:2017-11

541 ME 131 EN 60061-2:1993/A52:2017

542 ME 131 EN 60061-3:1993/A53:2017

543 ME 131 EN 60061-4:1992/A15:2017

544 ME 131 EN 60081:1998/A6:2017

545 ME 131 EN 60400:2017

546 ME 131 EN 60598-1:2015/A1:2018 Luminaires - Part 1: General requirements and tests

547 ME 131 EN IEC 60809:2015/A2:2018

548 ME 131 EN 60809:2015/A1:2017

549 ME 131 EN IEC 60810:2018

550 ME 131 EN 60838-1:2017/A1:2017

551 ME 131 EN 60901:1996/A6:2017

552 ME 131 EN 61184:2017 Bayonet lampholders

553 ME 131 EN IEC 62386-332:2018

554 ME 131 EN 62386-301:2017

555 ME 131 EN 62386-302:2017

556 ME 131 EN 62386-303:2017

557 ME 131 EN 62386-304:2017

558 ME 131 EN 62442-1:2011/A11:2017

Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values

Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

Double-capped fluorescent lamps - Performance specifications

Lampholders for tubular fluorescent lamps and starterholders

Lamps for road vehicles - Dimensional, electrical and luminous requirements

Lamps for road vehicles - Dimensional, electrical and luminous requirements

Lamps, light sources and led packages for road vehicles - Performance requirements

Miscellaneous lampholders - Part 1: General requirements and tests

Single-capped fluorescent lamps - Performance specifications

Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback

Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons

Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices

Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor

Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

559 ME 131 EN 62442-2:2014/A11:2017

560 ME 131 EN 62442-3:2014/A11:2017

561 ME 131 EN IEC 62554:2011/A1:2018

562 ME 131 EN 62612:2013/A11:2017

563 ME 131 EN 62612:2013/A11:2017/AC:2017-11

564 ME 131 EN 62717:2017

565 ME 131 EN 62931:2017 GX16t-5 capped tubular led lamp - Safety specifications

566 ME 133 EN 62256:2017

567 ME 135 EN 60286-1:2017

568 ME 135 EN 60384-15:2017

569 ME 140 EN 61970-452:2017

570 ME 140 EN 62325-451-3:2014/A1:2017

571 ME 140 EN 62325-451-4:2017

572 ME 140 EN 62351-7:2017

573 ME 140 EN 62351-9:2017

574 ME 140 EN 62488-2:2017

575 ME 144 EN 13306:2017 Maintenance - Maintenance terminology

576 ME 144 EN 17007:2017 Maintenance process and associated indicators

577 ME 145 EN 60153-4:2017

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear

Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear

Sample preparation for measurement of mercury level in fluorescent lamps



LED modules for general lighting - Performance requirements

Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement

Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes

Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte

Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles

Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market

Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market

Power systems management and associated information exchange - Data and communications security - Part 7: Network and System Management (NSM) data object models

Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment

Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC

Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

578 ME 145 EN 61076-3-104:2017

579 ME 145 EN 61076-3-122:2017

580 ME 145 EN 61169-59:2017

581 ME 145 EN 61587-6:2017

582 ME 147 EN 12102-1:2017

583 ME 147 EN 13771-2:2017

584 ME 147 EN ISO 14903:2017

585 ME 147 EN 17032:2018

586 ME 152 EN 13445-3:2014/A3:2017 Unfired pressure vessels - Part 3: Design

587 ME 157 EN ISO 2082:2017

588 ME 157 EN ISO 2360:2017

589 ME 157 EN ISO 9717:2017

590 ME 157 EN ISO 15589-1:2017

591 ME 157 EN 16866:2017

592 ME 157 EN ISO 18086:2017

593 ME 157 EN ISO 20274:2017

594 ME 157 EN ISO 27830:2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments

Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors

Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets

Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers

Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units

Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)

Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions

Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)

Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)

Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015)

Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2015)

Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)

Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)

595 ME 157 EN ISO 28706-3:2018

596 ME 159 EN 50655-1:2017

597 ME 159 EN 50655-2:2017

598 ME 159 EN 50655-3:2017

599 ME 159 EN 60811-201:2012/A1:2017

600 ME 159 EN 60811-202:2012/A1:2017

601 ME 159 EN 60811-401:2012/A1:2017

602 ME 159 EN 60811-410:2012/A1:2017

603 ME 159 EN 60811-508:2012/A1:2017

604 ME 159 EN 60811-509:2012/A1:2017

605 ME 159 EN 60811-511:2012/A1:2017

606 ME 161 EN 62282-3-201:2017

607 ME 161 EN 62282-4-102:2017

608 ME 164 EN 62056-5-3:2017

609 ME 164 EN 62056-6-1:2017

610 ME 164 EN 62056-8-5:2017

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017)

Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds

Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV

Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV

Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath

Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths

Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)

Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds

Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems

Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods

Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS)

Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks

611 ME 164 EN 62056-8-5:2017/AC:2018-01

612 ME 164 EN IEC 62056-6-2:2018

613 ME 164 EN 62056-8-6:2017

614 ME 165 EN 50341-2-13:2017/A1:2017

615 ME 165 EN 50341-2-8:2017

616 ME 165 EN 50341-2-9:2017

617 ME 166 EN 62586-1:2017

618 ME 166 EN 62586-2:2017

619 ME 166 EN 62754:2017 Computation of waveform Parameter uncertainties

620 ME 166 EN 62974-1:2017

621 ME 169 EN ISO 14692-1:2017

622 ME 169 EN ISO 14692-2:2017

623 ME 169 EN ISO 14692-3:2017

624 ME 169 EN ISO 14692-4:2017

625 ME 169 EN ISO 17781:2017

626 ME 169 EN ISO 18797-1:2017

627 ME 169 EN ISO 19901-2:2017

Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes

Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks

Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY (based on EN 50341-1:2012)

Overhead electrical lines exceeding AC 1 kV - Part 2-8: National Normative Aspects (NNA) for France (based on EN 50341-1:2012)

Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)

Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)

Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements

Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017)

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017)

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017)

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017)

Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017)

Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2017)

628 ME 169 EN ISO 24817:2017

629 ME 171 EN 1982:2017 Copper and copper alloys - Ingots and castings

630 ME 171 EN ISO 2143:2017

631 ME 171 EN ISO 2931:2018

632 ME 171 EN ISO 3210:2017

633 ME 171 EN ISO 7599:2018

634 ME 184 EN 10263-1:2017

635 ME 184 EN 10263-2:2017

636 ME 184 EN 10263-3:2017

637 ME 184 EN 10263-4:2017

638 ME 184 EN 10263-5:2017

639 ME 193 EN 61188-7:2017

640 ME 193 EN 61189-5-503:2017

641 ME 193 EN 61191-2:2017

642 ME 193 EN 61191-3:2017

643 ME 193 EN 61191-4:2017

644 ME 193 EN 62090:2017

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01)

Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)

Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)

Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions

Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working

Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels

Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering

Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels

Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction

Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards

Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies

Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies

Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies

Product package labels for electronic components using bar code and two- dimensional symbologies

645 ME 202 EN ISO 6149-4:2017

646 ME 202 EN ISO 21809-5:2017

647 ME 218 EN ISO 16001:2017

648 ME 221 EN ISO 287:2017

649 ME 225 EN 303-1:2017

650 ME 225 EN 303-2:2017

651 ME 225 EN 304:2017

652 ME 230 EN ISO 8596:2018

653 ME 230 EN ISO 8980-1:2017

654 ME 230 EN ISO 8980-2:2017

655 ME 230 EN ISO 11978:2017

656 ME 230 EN ISO 11981:2017

657 ME 230 EN ISO 11986:2017

658 ME 230 EN ISO 18369-1:2017

659 ME 230 EN ISO 18369-2:2017

660 ME 230 EN ISO 18369-3:2017

661 ME 230 EN ISO 18369-4:2017

662 ME 231 EN ISO 10156:2017

Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)

Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests (ISO 16001:2017)

Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)

Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking

Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners

Heating boilers - Test code for heating boilers for atomizing oil burners

Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017)

Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2017)

Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for power-variation lenses (ISO 8980-2:2017)

Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO 11978:2017)

Ophthalmic optics - Contact lenses and contact lens care products -Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:2017)

Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release (ISO 11986:2017)

Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO 18369-1:2017, Corrected version 2017-10-01)

Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)

Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO 18369-3:2017, Corrected version 2017-10-01)

Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01)

Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)

663 ME 231 EN ISO 11363-1:2018

664 ME 231 EN ISO 11363-2:2017

665 ME 231 EN ISO 14246:2014/A1:2017

666 ME 231 EN ISO 15996:2017

667 ME 231 EN ISO 17879:2017

668 ME 238 EN 50631-1:2017

669 ME 238 EN 60350-2:2018

670 ME 238 EN 62863:2017

671 ME 239 EN 60335-2-86:2003/A12:2017

672 ME 239 EN 60335-2-89:2010/A2:2017

673 ME 270 EN 15507:2017

674 ME 270 EN 15969-1:2017

675 ME 270 EN 15969-2:2017

676 ME 270 EN 16973:2017

677 ME 298 EN 12791:2016+A1:2017

678 ME 298 EN 16956:2017

679 ME 305 EN 1860-1:2013+A1:2017/AC:2017

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)

Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2014/Amd 1:2017)

Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)

Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)

Household appliances network and grid connectivity - Part 1: General Requirements, Generic Data Modelling and Neutral Messages

Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

Methods of measuring performances of electric hair clippers or trimmers for household use

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades

Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data

Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data

Road vehicles for combined transport - Semitrailer - Vertical transhipment

Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2)

Cosmetics - Analytical methods - HPLC/UV method for the identification and assay of hydroquinone, ethers of hydroquinone and corticosteroids in skin whitening cosmetic products

Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods

680 ME 311 EN IEC 60099-8:2018

681 ME 312 EN 50645:2017 Ecodesign requirements for small power transformers

682 ME 320 EN 1601:2017

683 ME 320 EN ISO 2592:2017

684 ME 320 EN ISO 4259-1:2017

685 ME 320 EN ISO 4259-2:2017

686 ME 320 EN ISO 5165:2018

687 ME 320 EN 15984:2017

688 ME 320 EN 16906:2017

689 ME 320 EN 16934:2017

690 ME 320 EN 16997:2017

691 ME 320 EN 17057:2018

692 ME 320 EN ISO 20623:2018

693 ME 324 EN ISO 10582:2018

694 ME 324 EN ISO 11378-2:2001/A1:2017

695 ME 324 EN 13329:2016+A1:2017

696 ME 324 EN 13553:2017

Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)

Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)

Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)

Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)

Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017)

Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method

Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method

Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE

Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method

Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID

Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)

Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017)

Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)

Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods

Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification

697 ME 324 EN 13845:2017

698 ME 336 EN 14450:2017

699 ME 338 EN 301:2017

700 ME 338 EN 302-2:2017

701 ME 338 EN 302-3:2017

702 ME 338 EN ISO 787-17:2017

703 ME 338 EN ISO 787-21:2017

704 ME 338 EN ISO 2812-1:2017

705 ME 338 EN ISO 2812-4:2017

706 ME 338 EN ISO 6270-1:2018

707 ME 338 EN ISO 6270-2:2018

708 ME 338 EN ISO 11126-10:2017

709 ME 338 EN ISO 11997-1:2017

710 ME 338 EN ISO 12944-1:2017

711 ME 338 EN ISO 12944-2:2017

712 ME 338 EN ISO 12944-3:2017

713 ME 338 EN ISO 12944-4:2017

714 ME 338 EN ISO 12944-6:2018

Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets

Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements

Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination

Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2002)

General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium (ISO 787-21:1979)

Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)

Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017)

Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)

Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017)

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017)

Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)

715 ME 338 EN ISO 12944-7:2017

716 ME 338 EN ISO 12944-8:2017

717 ME 338 EN ISO 12944-9:2018

718 ME 338 EN ISO 15110:2017

719 ME 338 EN 15773:2018

720 ME 338 EN ISO 18451-1:2017

721 ME 338 EN ISO 18451-2:2017

722 ME 338 EN ISO 19399:2017

723 ME 338 EN ISO 23900-1:2018

724 ME 338 EN ISO 23900-2:2018

725 ME 338 EN ISO 23900-3:2018

726 ME 357 EN ISO 6145-6:2017

727 ME 373 EN ISO 17100:2015/A1:2017

728 ME 373 EN ISO 18295-1:2017

729 ME 373 EN ISO 18295-2:2017

730 ME 373 EN ISO 20108:2017

731 ME 374 EN ISO/IEC 17011:2017

732 ME 375 EN 50672:2017

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)

Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)

Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines

Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2015)

Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO 18451-2:2015)

Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015)

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015)

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)

Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)

Translation services - Requirements for translation services - Amendment 1 (ISO 17100:2015/Amd 1:2017)

Customer contact centres - Part 1: Requirements for customer contact centres (ISO 18295-1:2017)

Customer contact centres - Part 2: Requirements for clients using the services of customer contact centres (ISO 18295-2:2017)

Simultaneous interpreting - Quality and transmission of sound and image input - Requirements (ISO 20108:2017)

Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017)

Ecodesign requirements for computers and computer servers

733 MEN 359 EN ISO 19115-1:2014/A1:2018

734 MEN 359 EN ISO 19157:2013/A1:2018

735 MM 53 EN 13284-1:2017

736 MM 53 EN 13284-2:2017

737 MM 323 EN ISO 14044:2006/A1:2018

738 MM 360 EN ISO 11508:2017

739 MM 360 EN 16766:2017 Bio-based solvents - Requirements and test methods

740 MM 360 EN ISO 17601:2018

741 MM 360 EN ISO 18187:2018

742 MM 360 EN ISO 18311:2018

743 MMJS 54 EN ISO 7243:2017

744 MMJS 54 EN ISO 7250-1:2017

745 MMJS 54 EN ISO 9241-125:2017

746 MMJS 54 EN ISO 9241-960:2017

747 MMJS 54 EN ISO 10075-1:2017

748 MMJS 59 EN 12013:2018

749 MMJS 59 EN ISO 16092-1:2018

750 MMJS 59 EN ISO 16092-3:2018

751 MMJS 66 EN 565:2017

752 MMJS 77 EN 1853:2017 Agricultural machinery - Trailers - Safety

753 MMJS 77 EN ISO 4254-7:2017

Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018)

Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018)

Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 1 (ISO 14044:2006/Amd 1:2017)

Soil quality - Determination of particle density (ISO 11508:2017)

Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016)

Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016)

Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016)

Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017)

Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017)

Ergonomics of human-system interaction - Part 125: Guidance on visual presentation of information (ISO 9241-125:2017)

Ergonomics of human-system interaction - Part 960: Framework and guidance for gesture interactions (ISO 9241-960:2017)

Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions (ISO 10075-1:2017)

Plastics and rubber machines - Internal mixers - Safety requirements

Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)

Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)

Mountaineering equipment - Tape - Safety requirements and test methods

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)

754 MMJS 77 EN ISO 5395-3:2013/A2:2018

755 MMJS 77 EN 15695-1:2017

756 MMJS 77 EN 15695-2:2017

757 MMJS 84 EN ISO 19225:2017

758 MMJS 85 EN 1459-1:2017

759 MMJS 85 EN 12999:2011+A2:2018 Cranes - Loader cranes

760 MMJS 85 EN 13001-3-1:2012+A2:2018

761 MMJS 85 EN 13001-3-6:2018

762 MMJS 85 EN 16719:2018 Transport platforms

763 MMJS 118 EN 1870-6:2017

764 MMJS 118 EN ISO 19085-3:2017

765 MMJS 118 EN ISO 19085-6:2017

766 MMJS 118 EN ISO 19085-8:2018

767 MMJS 118 EN ISO 19085-1:2017

768 MMJS 118 EN ISO 19085-2:2017

769 MMJS 118 EN ISO 19085-5:2017

770 MMJS 137 EN 14460:2018 Explosion resistant equipment

771 MMJS 137 EN IEC 60079-7:2015/A1:2018

772 MMJS 137 EN 60079-30-1:2017

773 MMJS 137 EN 60079-13:2017

774 MMJS 137 EN 60079-30-2:2017

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)

Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

775 MMJS 176 EN 61057:2017

776 MMJS 218 EN 474-1:2006+A5:2018

777 MMJS 223 EN ISO 14118:2018

778 MMJS 227 EN 342:2017

779 MMJS 227 EN 353-1:2014+A1:2017

780 MMJS 227 EN 13158:2018

781 MMJS 227 EN 13277-8:2017

782 MMJS 227 EN ISO 13506-1:2017

783 MMJS 227 EN 13634:2017

784 MMJS 227 EN 13911:2017

785 MMJS 227 EN 14058:2017

786 MMJS 227 EN 14225-1:2017

787 MMJS 227 EN 14225-2:2017

788 MMJS 227 EN 14225-3:2017

789 MMJS 227 EN ISO 19918:2017

790 MMJS 227 EN ISO 20349-1:2017

791 MMJS 227 EN ISO 20349-2:2017

792 MMJS 227 EN ISO 27065:2017

793 MMJS 230 EN ISO 11554:2017

794 MMJS 239 EN 50569:2013/A1:2018

Live working - Insulating aerial devices for mounting on a chassis

Earth-moving machinery - Safety - Part 1: General requirements

Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)

Protective clothing - Ensembles and garments for protection against cold

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line

Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods

Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors

Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)

Protective footwear for motorcycle riders - Requirements and test methods

Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

Protective clothing - Garments for protection against cool environments

Diving suits - Part 1: Wet suits - Requirements and test methods

Diving suits - Part 2: Dry suits - Requirements and test methods

Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirements and test methods

Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)

Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)

Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)

Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)

Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors

795 MMJS 239 EN 50570:2013/A1:2018

796 MMJS 239 EN 50571:2013/A1:2018

797 MMJS 255 EN 50636-2-107:2015/A1:2018

798 MMJS 255 EN 62841-2-1:2018

799 MMJS 255 EN 62841-2-17:2017

800 MMJS 255 EN 62841-3-1:2014/A11:2017

801 MMJS 255 EN 62841-3-10:2015/A11:2017

802 MMJS 255 EN 62841-3-14:2017

803 MMJS 255 EN 62841-3-4:2016/A11:2017

804 MMJS 255 EN 62841-3-6:2014/A11:2017

805 MMJS 255 EN 62841-3-9:2015/A11:2017

806 MMJS 255 EN 62841-3-13:2017

807 MMJS 274 EN ISO 389-1:2018

808 MMJS 274 EN ISO 28927-2:2009/A1:2017

809 MMJS 318 EN 12453:2017

Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers

Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills

Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017)

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)

Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods

810 MS 22 EN 50637:2017

811 MS 22 EN 82304-1:2017

812 MS 230 EN ISO 14889:2013/A1:2017

813 MS 230 EN ISO 15798:2013/A1:2017

814 MS 230 EN ISO 16671:2015/A1:2017

815 MS 230 EN ISO 21987:2017

816 MS 279 EN 50364:2018

817 MS 279 EN 50647:2017

818 MS 279 EN 50663:2017

819 MS 279 EN 50664:2017

820 MS 279 EN 50665:2017

821 MS 279 EN 62232:2017

822 MS 377 EN ISO 5359:2014/A1:2017

823 MS 377 EN ISO 6710:2017

824 MS 377 EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018)

825 MS 377 EN ISO 8536-14:2018

826 MS 377 EN ISO 9917-2:2017

827 MS 377 EN ISO 10555-1:2013/A1:2017

Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children

Health Software - Part 1: General requirements for product safety

Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses - Amendment 1 (ISO 14889:2013/Amd 1:2017)

Ophthalmic implants - Ophthalmic viscosurgical devices - Amendment 1 (ISO 15798:2013/Amd 1:2017)

Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment 1 (ISO 16671:2015/Amd 1:2017)

Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)

Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications

Basic standard for the evaluation of workers' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity

Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz)

Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ

Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)

Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure

Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017)

Single-use containers for human venous blood specimen collection (ISO 6710:2017)

Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016)

Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)

Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements - Amendment 1 (ISO 10555-1:2013/Amd 1:2017)

828 MS 377 EN ISO 10555-6:2017

829 MS 377 EN ISO 10993-16:2017

830 MS 377 EN ISO 10993-4:2017

831 MS 377 EN ISO 11608-7:2017

832 MS 377 EN ISO 11737-1:2018

833 MS 377 EN ISO 13897:2018

834 MS 377 EN ISO 14457:2017 Dentistry - Handpieces and motors (ISO 14457:2017)

835 MS 377 EN ISO 17664:2017

836 MS 377 EN ISO 18082:2014/A1:2017

837 MS 377 EN ISO 19023:2018 Dentistry - Orthodontic anchor screws (ISO 19023:2018)

838 MS 377 EN ISO 19448:2018

839 MS 377 EN ISO 20126:2012/A1:2018

840 MS 377 EN ISO 21533:2018

841 MS 377 EN ISO 22112:2017

842 MS 377 EN ISO 80601-2-55:2018

843 MT 4 EN 50126-1:2017

844 MT 4 EN 50126-2:2017

845 MT 4 EN 50239:2018

846 MT 4 EN 50343:2014/A1:2017

847 MT 4 EN 50463-1:2017

848 MT 4 EN 50463-2:2017

Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2017)

Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017)

Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment (ISO 11608-7:2016)

Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018)

Dentistry - Dental amalgam reusable mixing-capsules (ISO 13897:2018)

Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO 17664:2017)

Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases - Amendment 1 (ISO 18082:2014/Amd 1:2017)

Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)

Dentistry - Manual toothbrushes - General requirements and test methods - Amendment 1 (ISO 20126:2012/Amd 1:2018)

Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018)

Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017)

Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)

Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process

Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety

Railway applications - Radio remote control system of traction vehicle for shunting application

Railway applications - Rolling stock - Rules for installation of cabling

Railway applications - Energy measurement on board trains - Part 1: General

Railway applications - Energy measurement on board trains - Part 2: Energy measuring

849 MT 4 EN 50463-3:2017

850 MT 4 EN 50463-4:2017

851 MT 4 EN 50463-5:2017

852 MT 4 EN 50562:2018

853 MT 4 EN 50657:2017

854 MT 4 EN 60077-1:2017

855 MT 4 EN 60077-2:2017

856 MT 72 EN 2004-7:2017

857 MT 72 EN 2034:2017

858 MT 72 EN 2036:2017

859 MT 72 EN 2037:2017

860 MT 72 EN 2040:2017

861 MT 72 EN 2053:2017

862 MT 72 EN 2119:2017

863 MT 72 EN 2135:2017

864 MT 72 EN 2137:2017

865 MT 72 EN 2174:2017

866 MT 72 EN 2221:2017

867 MT 72 EN 2222:2017

868 MT 72 EN 2287:2017

869 MT 72 EN 2306:2017

870 MT 72 EN 2667-2:2018

871 MT 72 EN 2850:2017

872 MT 72 EN 3094:2017

Railway applications - Energy measurement on board trains - Part 3: Data handling

Railway applications - Energy measurement on board trains - Part 4: Communication

Railway applications - Energy measurement on board trains - Part 5: Conformity assessment

Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems

Railways Applications - Rolling stock applications - Software on Board Rolling Stock

Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules

Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules

Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys

Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11

Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8

Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12

Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16

Aerospace series - U-section aluminium alloy folded profiles - Dimensions

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ? D ? 10 mm - Rm ? 960 MPa

Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ? 40 mm

Aerospace series - Steel FE-PL75 - 1 100 MPa ? Rm ? 1 250 MPa - Bars - De ? 100 mm

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ? 100 mm - Rm ? 850 MPa

Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ? a ? 55 mm

Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings

Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads

Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars

Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear

Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction

Aerospace series - Sealants - Test method - Determination of the application time

873 MT 72 EN 3451:2017

874 MT 72 EN 3820:2017

875 MT 72 EN 3875:2017

876 MT 72 EN 3904:2017

877 MT 72 EN 4691-1:2017

878 MT 72 EN 4691-2:2018

879 MT 72 EN 4692:2017

880 MT 72 EN 4693:2017

881 MT 72 EN 4694:2017

882 MT 72 EN 4695:2017

883 MT 72 EN 4702-02:2017

884 MT 72 EN 4702-03:2017

885 MT 72 EN 4702-04:2017

886 MT 72 EN 4702-05:2017

887 MT 72 EN 4729:2017

888 MT 72 EN 6018:2017

889 MT 72 EN 6041:2018

890 MT 72 EN 6064:2017

891 MT 72 EN 6128:2017

892 MT 72 EN 9117:2017

893 MT 72 EN 9300-005:2017

894 MT 72 EN 9300-007:2017

Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ? 300 mm

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C

Aerospace series - Metallic materials, Filler metal for brazing - Technical specification

Aerospace series - Washers, wire locking in aluminium alloy, anodized

Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification

Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit

Aerospace series - Tie Rod with integrated bolts -Locking clip

Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C

Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F

Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer

Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys

Aerospace series - Test methods for metallic materials - Determination of density according to displacement method

Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)

Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)

Aerospace series - Blind bolt, 100° flush head, high strength

Aerospace series - Delegated Product Release Verification

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification

Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References

895 MT 72 EN 16603-70-41:2017

896 MT 72 EN 16603-10-24:2017 Space engineering - Interface management

897 MT 143 EN 62287-1:2017

898 MT 146 EN 12080:2017 Railway applications - Axleboxes - Rolling bearings

899 MT 146 EN 12081:2017 Railway applications - Axleboxes - Lubricating greases

900 MT 146 EN 12082:2017 Railway applications - Axleboxes - Performance testing

901 MT 146 EN 13103-1:2017

902 MT 146 EN 13848-5:2017

903 MT 146 EN 14478:2017 Railway applications - Braking - Generic vocabulary

904 MT 146 EN 15654-1:2018

905 MT 146 EN 16186-2:2017

906 MT 146 EN 16432-2:2017

907 MT 146 EN 16839:2017 Railway applications - Rolling stock - Head stock layout

908 MT 146 EN 16922:2017

909 MT 199 EN ISO 8099-1:2018

910 MT 199 EN ISO 8665:2017

911 MT 199 EN ISO 8846:2017

912 MT 199 EN ISO 8847:2017

913 MT 199 EN ISO 8848:2017 Small craft - Remote steering systems (ISO 8848:1990)

914 MT 199 EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015)

915 MT 199 EN ISO 9097:2017 Small craft - Electric fans (ISO 9097:1991)

916 MT 199 EN ISO 9775:2017

917 MT 199 EN ISO 10088:2017

918 MT 199 EN ISO 10133:2017

919 MT 199 EN ISO 10239:2017

920 MT 199 EN ISO 10592:2017

Space engineering - Telemetry and telecommand packet utilization

Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques

Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals

Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line, switches and crossings

Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service

Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators

Railway applications - Ballastless track systems - Part 2: System design, subsystems and components

Railway applications - Ground based services - Vehicle waste water discharge equipment

Small craft - Waste systems - Part 1: Waste water retention (ISO 8099-1:2018)

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)

Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)

Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

Small craft - Permanently installed fuel systems (ISO 10088:2013)

Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

Small craft - Hydraulic steering systems (ISO 10592:1994)

921 MT 199 EN ISO 11105:2017

922 MT 199 EN ISO 12217-1:2017

923 MT 199 EN ISO 12217-2:2017

924 MT 199 EN ISO 12217-3:2017

925 MT 199 EN ISO 13929:2017

926 MT 199 EN ISO 15584:2017

927 MT 199 EN ISO 15652:2017

928 MT 199 EN ISO 16147:2017

929 MT 199 EN ISO 18422:2017

930 MT 303 EN 2267-009:2017

931 MT 303 EN 2267-010:2017

932 MT 303 EN 2346-005:2017

933 MT 303 EN 2997-006:2017

934 MT 303 EN 3475-603:2018

935 MT 303 EN 3475-604:2018

936 MT 303 EN 3475-605:2018

937 MT 303 EN 3475-701:2017

938 MT 303 EN 3475-707:2017

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015)

Small craft - Steering gear - Geared link systems (ISO 13929:2001)

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)

Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)

Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons (ISO 18422:2014)

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly

939 MT 303 EN 3660-031:2017

940 MT 303 EN 3660-032:2017

941 MT 303 EN 3660-034:2017

942 MT 303 EN 3660-035:2017

943 MT 303 EN 3660-066:2017

944 MT 303 EN 4008-004:2017

945 MT 303 EN 4533-002:2017

946 MT 303 EN 4533-003:2017

947 MT 303 EN 4533-004:2018

948 MT 303 EN 4644-001:2017

949 MT 303 EN 4652-002:2017

950 MT 303 EN 4652-221:2017

951 MT 303 EN 4652-222:2017

952 MT 303 EN 4652-320:2017

953 MT 303 EN 4652-321:2017

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 034: Memory metal rings, style Z, for the attachment of screens - Product standard

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard

Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement

Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices

Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection

Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification

Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances

Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard

954 MT 303 EN 4652-322:2017

955 MT 303 EN 4652-420:2017

956 MT 303 EN 4652-421:2017

957 MT 303 EN 4652-220:2017

958 MT 303 EN 4674-004:2017

959 MT 303 EN 4708-104:2017

960 MT 303 EN 6049-008:2017

961 MT 303 EN 6059-303:2017

962 MT 303 EN 6059-503:2017

963 MT 345 EN ISO 16407-1:2017

964 MT 345 EN ISO 16410-1:2017

965 MT 345 EN ISO 25110:2017

Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 420: Type 4, C interface - Crimp assembly version - Straight plug - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 421: Type 4, C interface - Crimp assembly version - Right angle plug - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve

Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 1: Test suite structure and test purposes (ISO 16407-1:2017)

Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017)

Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017)

Standarde europene propuse a se adopta ca standarde române

TC

CEN/TC 275

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 327

CEN/TC 260

CEN/SS C01

CEN/SS C01

CEN/TC 338

CEN/TC 307

CEN/TC 345

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 191

CEN/TC 127

CEN/TC 127

CEN/TC 127

CEN/TC 127

CEN/TC 164

CEN/TC 164

CEN/TC 164

CEN/TC 164

CEN/TC 230

CEN/TC 230

CEN/TC 164

CEN/TC 230

CEN/TC 346

CEN/TC 346

CLC/SR 103

ERM TG28

ERM TG28

ERM TGAERO

ERM TG28

ATTM

ATTM

ATTM

ATTM

ATTM

CLC/TC 210

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/SR 86C

CLC/SR 86

CLC/TC 86BXA

CLC/SR 86C

CLC/SR 86C

CLC/SR 86C

CLC/SR 86C

CLC/SR 86

CEN/TC 224

CEN/TC 224

CEN/TC 224

CLC/TC 205

CLC/TC 205

CLC/TC 215

CLC/TC 205

DECT

DECT

DECT

DECT

DECT

DECT

DECT

DECT

DECT

TCCE 3

BRAN

SPS 5

SPS 5

SPS 5

SPS 5

SPS 5

SPS 5

SPAN 13

SPAN 13

SPAN 13

SPS 5

SPS 5

SPS 2

SPS 3

SPS 9

SPS 3

SPS 2

SPS 2

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 4

SMG 4

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 3

SMG 2

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

SMG 11

3GPP CN

SMG 4

SMG 4

SMG 9

SMG 2

SES

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CEN/TC 251

CEN/TC 251

CEN/TC 251

CEN/TC 251

CEN/TC 251

CLC/TC 209

CLC/TC 209

CLC/TC 100X

CLC/TC 100X

CLC/SR 100

CLC/SR 100

CLC/SR 100

CLC/TC 100X

CLC/SR 100

CLC/SR 100

CLC/SR 100

CLC/SR 100

CEN/TC 331

CEN/TC 331

CEN/TC 51

CEN/TC 254

CEN/TC 88

CEN/TC 351

CEN/TC 246

CEN/TC 246

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CEN/TC 165

CEN/TC 165

CEN/TC 226

CEN/TC 226

CEN/TC 226

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 336

CEN/TC 336

CEN/TC 336

CEN/TC 336

CEN/TC 169

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 126

CEN/TC 89

CEN/TC 156

CEN/TC 312

CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 104

CEN/TC 134

CEN/TC 349

CEN/TC 350

CEN/TC 442

CEN/TC 250

CEN/TC 250

CEN/TC 250

CEN/TC 250

CLC/TC 81X

CLC/TC 81X

CEN/TC 341

CEN/TC 341

CEN/TC 341

CEN/TC 341

CEN/TC 341

CEN/TC 341

CLC/SR 3

CLC/SR 3D

CLC/SR 3

CLC/SR 3D

CLC/TC 14

CLC/TC 14

CLC/SR 15

CLC/SR 15

CLC/SR 15

CLC/SR 15

CLC/TC 17AC

CLC/TC 17AC

CLC/TC 17AC

CLC/TC 38

CLC/TC 121A

CLC/TC 121A

CLC/TC 121A

CLC/TC 23BX

CLC/TC 23BX

CLC/TC 23E

CLC/TC 36A

CLC/TC 36A

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CEN/TC 430

CLC/TC 45AX

CLC/TC 45B

CLC/TC 45AX

CLC/SR 47E

CLC/SR 47E

CLC/SR 47

CLC/SR 47

CLC/SR 47

CLC/SR 49

CLC/SR 49

CLC/SR 49

CLC/TC 111X

CLC/TC 111X

CLC/SR 104

CLC/TC 111X

CLC/TC 55

CLC/TC 55

CLC/TC 55

CLC/TC 55

CLC/TC 55

CLC/TC 55

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/SR 29

CLC/SR 29

CLC/SR 29

CLC/SR 29

CLC/SR 87

CLC/SR 29

CLC/SR 87

CLC/SR 29

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 210

CLC/TC 210

CLC/TC 210

CLC/TC 210

CLC/TC 210

CLC/TC 210

CLC/SR 27

CLC/SR 89

CLC/SR 90

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 88

CLC/TC 88

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 22X

CLC/TC 22X

CLC/TC 22X

CLC/TC 22X

CLC/TC 22X

CEN/TC 240

CEN/TC 240

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 240

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 121

CEN/TC 138

CEN/TC 138

CEN/TC 138

CEN/TC 138

ECISS/TC 101

ECISS/TC 101

CEN/SS M11

CEN/SS M11

CEN/SS M11

CEN/SS M11

CEN/TC 190

CEN/TC 190

CEN/TC 190

CEN/TC 190

CEN/SS F01

CEN/SS F01

CEN/SS F01

CEN/SS F01

CEN/SS F01

CEN/SS F20

CEN/TC 290

CEN/TC 290

CEN/TC 290

CEN/TC 185

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 136

CEN/TC 144

CEN/TC 245

CEN/TC 245

CEN/TC 245

CEN/TC 301

CEN/TC 333

CEN/TC 301

CEN/TC 242

CEN/TC 93

CEN/TC 69

CEN/TC 69

CEN/TC 69

CEN/TC 289

CEN/TC 309

CEN/TC 289

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 243

CEN/TC 243

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 155

CEN/TC 218

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 218

CEN/TC 155

CEN/TC 249

CEN/TC 249

CEN/TC 218

CEN/TC 218

CEN/TC 218

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 249

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 218

CEN/TC 318

CEN/TC 237

CEN/TC 142

CEN/TC 142

CEN/TC 207

CEN/TC 175

CEN/TC 175

CEN/TC 175

CEN/TC 175

CEN/TC 207

CEN/TC 175

CEN/TC 184

CEN/TC 52

CEN/TC 52

CEN/TC 52

CEN/TC 52

CEN/TC 52

CLC/SR 94

CLC/SR 94

CLC/TC 26B

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/SR 4

CLC/SR 40

CLC/TC 40XA

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CEN/TC 319

CEN/TC 319

CLC/SR 46F

CLC/SR 48B

CLC/SR 48B

CLC/SR 46F

CLC/SR 48D

CEN/TC 113

CEN/TC 113

CEN/TC 182

CEN/TC 44

CEN/TC 54

CEN/TC 262

CEN/TC 262

CEN/TC 262

CEN/TC 219

CEN/TC 262

CEN/TC 219

CEN/TC 262

CEN/TC 262

CEN/TC 262

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/TC 20

CLC/SR 105

CLC/SR 105

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 13

CLC/TC 11

CLC/TC 11

CLC/TC 11

CLC/TC 85X

CLC/TC 85X

CLC/TC 85X

CLC/TC 85X

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 133

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

ECISS/TC 106

ECISS/TC 106

ECISS/TC 106

ECISS/TC 106

ECISS/TC 106

CLC/SR 91

CLC/SR 91

CLC/SR 91

CLC/SR 91

CLC/SR 91

CLC/SR 91

ECISS/TC 110

ECISS/TC 110

CEN/TC 151

CEN/TC 172

CEN/TC 57

CEN/TC 57

CEN/TC 57

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 23

CEN/TC 23

CEN/TC 23

CEN/TC 23

CEN/TC 23

CEN/TC 23

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 61

CLC/TC 61

CEN/TC 261

CEN/TC 296

CEN/TC 296

CEN/TC 119

CEN/TC 216

CEN/TC 392

CEN/TC 281

CLC/SR 37

CLC/BTTF 146-1

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 134

CEN/TC 134

CEN/TC 134

CEN/TC 134

CEN/TC 134

CEN/TC 263

CEN/TC 193

CEN/TC 193

CEN/TC 193

CEN/TC 298

CEN/TC 298

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 298

CEN/TC 298

CEN/TC 139

CEN/TC 298

CEN/TC 298

CEN/TC 298

CEN/SS N21

CEN/SS A07

CEN/SS A99

CEN/SS A99

CEN/SS A07

CEN/CLC/JTC 1

CLC/TC 100X

CEN/TC 287

CEN/TC 287

CEN/TC 264

CEN/TC 264

CEN/SS S26

CEN/TC 444

CEN/TC 411

CEN/TC 444

CEN/TC 444

CEN/TC 444

CEN/TC 122

CEN/TC 122

CEN/TC 122

CEN/TC 122

CEN/TC 122

CEN/TC 145

CEN/TC 143

CEN/TC 143

CEN/TC 136

CEN/TC 144

CEN/TC 144

CEN/TC 144

CEN/TC 144

CEN/TC 144

CEN/TC 196

CEN/TC 150

CEN/TC 147

CEN/TC 147

CEN/TC 147

CEN/TC 10

CEN/TC 142

CEN/TC 142

CEN/TC 142

CEN/TC 142

CEN/TC 142

CEN/TC 142

CEN/TC 142

CEN/TC 305

CLC/TC 31

CLC/TC 31

CLC/TC 31

CLC/TC 31

CLC/TC 78

CEN/TC 151

CEN/TC 114

CEN/TC 162

CEN/TC 160

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 161

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 161

CEN/TC 161

CEN/TC 162

CEN/TC 123

CLC/TC 61

CLC/TC 61

CLC/TC 61

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CLC/TC 116

CEN/TC 211

CEN/TC 231

CEN/TC 33

CLC/TC 62

CLC/TC 62

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 170

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CLC/TC 106X

CEN/TC 215

CEN/TC 140

CEN/TC 55

CEN/TC 205

CEN/TC 55

CEN/TC 205

CEN/TC 205

CEN/TC 206

CEN/TC 206

CEN/TC 205

CEN/TC 204

CEN/TC 55

CEN/TC 55

CEN/TC 204

CEN/TC 215

CEN/TC 55

CEN/TC 55

CEN/TC 55

CEN/TC 55

CEN/TC 55

CEN/TC 215

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4

ASD-STAN/D 4/WG 5

ASD-STAN/D 4/WG 1

ASD-STAN/D 4/WG 3

ASD-STAN/D 4/WG 11

ASD-STAN/D 4/WG 1

ASD-STAN/D 3/WG 1

ASD-STAN/D 4/WG 3

ASD-STAN/D 4/WG 8

ASD-STAN/D 4/WG 8

ASD-STAN/D 4/WG 7

ASD-STAN/D 3

ASD-STAN/D 4

ASD-STAN/D 3

ASD-STAN/D 3

ASD-STAN/D 3

ASD-STAN/D 3

ASD-STAN/D 3

ASD-STAN/D 3

ASD-STAN/D 4/WG 1

ASD-STAN/D 3/WG 1

ASD-STAN/D 3/WG 2

ASD-STAN/D 3/WG 2

ASD-STAN/D 3/WG 2

ASD-STAN/D 3/WG 2

ASD-STAN/D 4/WG 6

ASD-STAN/D 4/WG 5

ASD-STAN/D 4/WG 5

ASD-STAN/D 4/WG 5

ASD-STAN/D 3/WG 2

ASD-STAN/D 6/WG 1

ASD-STAN/D 1/WG 1

ASD-STAN/D 1/WG 1

CEN/CLC/JTC 5

CEN/CLC/JTC 5

CLC/SR 80

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/TC 15

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2/WG 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2/WG 3

ASD-STAN/D 2/WG 3

ASD-STAN/D 2/WG 3

ASD-STAN/D 2/WG 3

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

CEN/TC 278

CEN/TC 278

CEN/TC 278

ASD-STAN/D 2/WG 3

ASD-STAN/D 2/WG 8

ASD-STAN/D 2/WG 8

SECTIUNEA 2

Nr crt


1 MAI 216 EN 3-8:2006

2 MAI 216 EN 3-8:2006/AC:2007

3 MAI 216 EN 1866-2:2014

4 MCSI 30 EN 61000-6-3:2007/A1:2011

5 MCSI 164 EN 62052-21:2004

6 MCSI 164 EN 62054-11:2004

7 MCSI 164 EN 62054-21:2004

8 MCSI 218 EN 13309:2010

9 59 EN 14399-1:2015

10 59 EN 15048-1:2016

11 111 EN 13282-2:2015

12 111 EN 13915:2017

13 111 EN 14209:2017

Standarde europene armonizate propuse a se adopta ca standarde române prin publicarea versiunii române

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches

Construction machinery - Electromagnetic compatibility of machines with internal power supply

MDRAPFE

High-strength structural bolting assemblies for preloading - Part 1: General requirements

MDRAPFE

Non-preloaded structural bolting assemblies - Part 1: General requirements

MDRAPFE

Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria

MDRAPFE

Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods

MDRAPFE

Preformed plasterboard cornices - Definitions, requirements and test methods

14 111 EN 14216:2015

15 111 EN 14353:2017

16 111 EN 14496:2017

17 111 EN 15743:2010+A1:2015

18 113 EN 490:2011+A1:2017

19 113 EN 16153:2013+A1:2015

20 122 EN 15681-2:2017

21 169 EN 13160-2:2016

22 169 EN 13160-3:2016

23 169 EN 13160-4:2016

24 169 EN 13160-5:2016

25 169 EN 13160-7:2016

26 187 EN 12368:2015 Traffic control equipment - Signal heads

27 187 EN 13108-1:2016

28 187 EN 13108-2:2016

29 187 EN 13108-3:2016

30 187 EN 13108-4:2016

MDRAPFE

Cement - Composition, specifications and conformity criteria for very low heat special cements

MDRAPFE

Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

MDRAPFE

Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods

MDRAPFE

Supersulfated cement - Composition, specifications and conformity criteria

MDRAPFE

Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications

MDRAPFE

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

MDRAPFE

Glass in Building - Basic alumino silicate glass products - Part 2: Product standard

MDRAPFE

Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems

MDRAPFE

Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks

MDRAPFE

Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems

MDRAPFE

Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems

MDRAPFE

Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

MDRAPFE

MDRAPFE

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete

MDRAPFE

Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)

MDRAPFE

Bituminous mixtures - Material specifications - Part 3: Soft Asphalt

MDRAPFE

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt

31 187 EN 13108-4:2016/AC:2017

32 187 EN 13108-5:2016

33 187 EN 13108-6:2016

34 187 EN 13108-7:2016

35 187 EN 13108-9:2016

36 187 EN 14388:2015 Road traffic noise reducing devices - Specifications

37 216 EN 54-12:2015

38 216 EN 54-5:2017

39 216 EN 671-2:2012

40 216 EN 12101-2:2017

41 216 EN 12101-3:2015

42 302 EN 14037-1:2016

43 302 EN ISO 16890-1:2016

44 302 EN ISO 16890-2:2016

MDRAPFE

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt

MDRAPFE

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt

MDRAPFE

Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt

MDRAPFE

Bituminous mixtures - Material specifications - Part 7: Porous Asphalt

MDRAPFE

Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)

MDRAPFE

MDRAPFE

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam

MDRAPFE

Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors

MDRAPFE

Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose

MDRAPFE

Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators

MDRAPFE

Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)

MDRAPFE

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements

MDRAPFE

Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016)

MDRAPFE

Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)

45 302 EN ISO 16890-3:2016

46 302 EN ISO 16890-4:2016

47 318 EN 13561:2015

48 318 EN 13561:2015/AC:2016

49 318 EN 13637:2015

50 318 EN 13659:2015

51 321 EN 12602:2016

52 321 EN 16622:2015

53 324 EN 14041:2018

54 338 EN 14680:2015

55 338 EN 14814:2016

56 393 EN 16475-2:2017

57 393 EN 16475-3:2016

58 393 EN 16475-7:2016

59 393 EN 16497-1:2015

60 393 EN 16497-2:2017

61 ME 19 EN 62321-1:2013

62 ME 19 EN 62321-2:2014

63 ME 19 EN 62321-3-1:2014

64 ME 19 EN 62321-4:2014

65 ME 66 EN 15649-5:2009

MDRAPFE

Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)

MDRAPFE

Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016)

MDRAPFE

External blinds and awnings - Performance requirements including safety

MDRAPFE

External blinds and awnings - Performance requirements including safety

MDRAPFE

Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods

MDRAPFE

Shutters and external venetian blinds - Performance requirements including safety

MDRAPFE

Prefabricated reinforced components of autoclaved aerated concrete

MDRAPFE

Silica-calcium fume for concrete - Definitions, requirements and conformity criteria

MDRAPFE

Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics

MDRAPFE

Adhesives for non-pressure thermoplastics piping systems - Specifications

MDRAPFE

Adhesives for thermoplastic piping systems for fluids under pressure - Specifications

MDRAPFE

Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods

MDRAPFE

Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

MDRAPFE

Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods

MDRAPFE

Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications

MDRAPFE

Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications

Determination of certain substances in electrotechnical products - Part 1: Introduction and overview

Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation

Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices

66 ME 66 EN 15649-7:2009

67 ME 89 EN 1591-1:2013

68 ME 89 EN 12516-2:2014

69 ME 109 EN 1359:2017 Gas meters - Diaphragm gas meters

70 ME 125 EN 71-1:2014

71 ME 125 EN 71-12:2016

72 ME 125 EN 71-5:2015

73 ME 131 EN 60064:1995

74 ME 131 EN 62554:2011

75 ME 161 EN 61960:2011

76 ME 374 EN ISO/IEC 17025:2017

77 MM 323 EN ISO 14044:2006/A1:2018

78 MMJS 66 EN 565:2017

79 MMJS 66 EN 566:2017

80 MMJS 77 EN ISO 5395-2:2013/A1:2016

81 MMJS 77 EN ISO 5395-2:2013/A2:2017

82 MMJS 77 EN ISO 5395-3:2013/A1:2017

83 MMJS 77 EN ISO 10517:2009/A1:2013

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation

Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells

Safety of toys - Part 1: Mechanical and physical properties

Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

Sample preparation for measurement of mercury level in fluorescent lamps

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)

Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 1 (ISO 14044:2006/Amd 1:2017)

Mountaineering equipment - Tape - Safety requirements and test methods

Mountaineering equipment - Slings - Safety requirements and test methods

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016)

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017)

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and test probe (ISO 5395-3:2013/Amd 1:2017, Corrected version 2017-03)

Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)

84 MMJS 77 EN ISO 11681-2:2011/A1:2017

85 MMJS 77 EN ISO 11806-2:2011

86 MMJS 77 EN ISO 11850:2011/A1:2016

87 MMJS 77 EN ISO 19932-1:2013

88 MMJS 218 EN 474-5:2006+A3:2013

89 MMJS 223 EN ISO 14122-1:2016

90 MMJS 227 EN 374-2:2014

91 MMJS 227 EN ISO 374-1:2016

92 MMJS 227 EN ISO 374-5:2016

93 MMJS 227 EN 388:2016 Protective gloves against mechanical risks94 MMJS 227 EN ISO 9151:2016

95 MMJS 227 EN 13911:2017

96 MMJS 227 EN 16689:2017

97 MMJS 227 EN ISO 20349-1:2017

98 MMJS 227 EN ISO 20349-2:2017

99 MMJS 227 EN ISO 20471:2013/A1:2016

100 MMJS 358 EN 16263-2:2015

101 MMJS 358 EN 16263-5:2015

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017)

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)

Machinery for forestry - General safety requirements (ISO 11850:2011/Amd 1:2016)

Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)

Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)

Protective clothing against heat and flame - Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03)

Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue

Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)

Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)

High visibility clothing - Test methods and requirements - Amendment 1 (ISO 20471:2013/Amd 1:2016)

Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements

Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use

102 MS 22 EN 60601-1-3:2008/A11:2016

103 MS 22 EN 60601-1-6:2010

104 MS 22 EN 60601-1-8:2007/A11:2017

105 MS 22 EN 60601-2-28:2010

106 MS 22 EN 60601-2-33:2010/A12:2016

107 MS 377 EN ISO 7197:2009

108 MS 377 EN ISO 7376:2009

109 MS 377 EN ISO 7886-4:2009

110 MS 377 EN ISO 10535:2006

111 MS 377 EN ISO 10993-11:2009

112 MS 377 EN ISO 10993-12:2012

113 MS 377 EN ISO 10993-14:2009

114 MS 377 EN ISO 10993-15:2009

115 MS 377 EN ISO 10993-17:2009

116 MS 377 EN ISO 10993-18:2009

117 MS 377 EN ISO 10993-3:2014

118 MS 377 EN ISO 10993-5:2009

119 MS 377 EN ISO 10993-9:2009

Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007)

Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009)

Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006)

Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)

Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006)

Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)

Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001)

Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000)

Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002)

Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005)

Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014)

Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)

Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009)

120 MS 377 EN ISO 11137-1:2015

121 MT 143 EN 60092-507:2015 Electrical installations in ships - Part 507 - Small vessels

122 MT 146 EN 13129:2016

123 MT 146 EN 13230-1:2016

124 MT 146 EN 13230-2:2016

125 MT 146 EN 13230-3:2016

126 MT 146 EN 13674-1:2011+A1:2017

127 MT 146 EN 14033-1:2017

128 MT 146 EN 14531-1:2015

129 MT 146 EN 14531-2:2015

130 MT 146 EN 14535-3:2015

131 MT 146 EN 15220:2016 Railway applications - Brake indicators

132 MT 146 EN 15313:2016

133 MT 146 EN 15528:2015

134 MT 146 EN 15551:2017 Railway applications - Railway rolling stock - Buffers

135 MT 146 EN 16186-3:2016

136 MT 146 EN 16584-1:2017

137 MT 146 EN 16584-2:2017

138 MT 146 EN 16584-3:2017

Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)

Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests

Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements

Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers

Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running

Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles

Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles

Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification

Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance

Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure

Railway applications - Driver's cab - Part 3: Design of displays

Railway applications - Design for PRM use - General requirements - Part 1: Contrast

Railway applications - Design for PRM use - General requirements - Part 2: Information

Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics

139 MT 146 EN 16585-1:2017

140 MT 146 EN 16585-2:2017

141 MT 146 EN 16585-3:2017

142 MT 146 EN 16586-1:2017

143 MT 146 EN 16586-2:2017

144 MT 146 EN 16587:2017

145 MT 146 EN 16683:2015

146 MT 146 EN 16729-1:2016

147 MT 199 EN ISO 8665:2017

148 MT 199 EN ISO 8846:2017

149 MT 199 EN ISO 8847:2017

Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets

Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving

Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors

Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress

Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids

Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure

Railway applications - Call for aid and communication device - Requirements

Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)

Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)

Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)

150 MT 199 EN ISO 8848:2017 Small craft - Remote steering systems (ISO 8848:1990)

151 MT 199 EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015)

152 MT 199 EN ISO 9097:2017 Small craft - Electric fans (ISO 9097:1991)

153 MT 199 EN ISO 9775:2017

154 MT 199 EN ISO 10088:2017

155 MT 199 EN ISO 10133:2017

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

Small craft - Permanently installed fuel systems (ISO 10088:2013)

Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

156 MT 199 EN ISO 10239:2017

157 MT 199 EN ISO 10592:2017

158 MT 199 EN ISO 11105:2017

159 MT 199 EN ISO 11592-1:2016

160 MT 199 EN ISO 12217-1:2017

161 MT 199 EN ISO 12217-2:2017

Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

Small craft - Hydraulic steering systems (ISO 10592:1994)

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)

Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016)

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)

162 MT 199 EN ISO 12217-3:2017

163 MT 199 EN ISO 13929:2017

164 MT 199 EN ISO 14895:2016

165 MT 199 EN ISO 15584:2017

166 MT 199 EN ISO 15652:2017

167 MT 199 EN ISO 16147:2017

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015)

Small craft - Steering gear - Geared link systems (ISO 13929:2001)

Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)

Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)

168 MT 199 EN ISO 16315:2016

169 MT 199 EN ISO 18854:2015

170 MT 199 EN ISO 19009:2015

171 MT 199 EN ISO 21487:2012/A2:2015

172 UE 4 EN 50124-1:2017

173 UE 4 EN 50124-2:2017

174 UE 4 EN 50153:2014/A1:2017

175 UE 4 EN 50155:2017

176 UE 4 EN 62580-1:2016/A11:2017

177 UE 4 EN 62625-1:2013/A11:2017

178 UE 9 EN 60715:2017

179 UE 9 EN 60947-5-3:2013

180 UE 9 EN 60947-5-5:1997/A2:2017

181 UE 9 EN 62026-7:2013

182 UE 9 EN 62626-1:2014

183 UE 11 EN 60670-1:2005/A1:2013

184 UE 11 EN 61242:1997/A13:2017

Small craft - Electric propulsion system (ISO 16315:2016)

Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)

Small craft - Electric navigation lights - Performance of LED lights (ISO 19009:2015)

Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 2 (ISO 21487:2012/Amd 2:2015)

Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment

Railway applications - Insulation coordination - Part 2: Overvoltages and related protection

Railway applications - Rolling stock - Protective provisions relating to electrical hazards

Railway applications - Rolling stock - Electronic equipment

Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture

Electronic railway equipment - On board driving data recording system - Part 1: System specification

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

Electrical accessories - Cable reels for household and similar purposes

185 UE 11 EN 61534-21:2014

186 UE 11 EN 61914:2016 Cable cleats for electrical installations187 UE 11 EN 62275:2015

188 UE 22 EN 60601-2-25:2015

189 UE 22 EN 60601-2-26:2015

190 UE 22 EN 82304-1:2017

191 UE 23 EN 61010-2-201:2013

192 UE 24 EN 61010-031:2015

193 UE 39 EN ISO 15614-8:2016

194 UE 39 EN ISO 15614-1:2017

195 UE 39 EN ISO 15614-7:2016

196 UE 42 EN 10207:2017

197 UE 42 EN 10213:2007+A1:2016 Steel castings for pressure purposes198 UE 42 EN 10269:2013

199 UE 42 EN 10272:2016 Stainless steel bars for pressure purposes200 UE 42 EN 10273:2016

201 UE 59 EN ISO 28881:2013

202 UE 77 EN ISO 4254-1:2015

203 UE 78 EN 15997:2011

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

Cable management systems - Cable ties for electrical installations

Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs

Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs

Health Software - Part 1: General requirements for product safety

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)

Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

204 UE 78 EN 16029:2012

205 UE 85 EN 81-20:2014

206 UE 85 EN 81-50:2014

207 UE 85 EN 12929-2:2015

208 UE 85 EN 12930:2015

209 UE 89 EN 12516-4:2014

210 UE 97 EN ISO 12863:2010/A1:2016

211 UE 105 EN 13368-2:2017

212 UE 108 EN ISO 10931:2005/A1:2015

213 UE 108 EN ISO 15493:2003/A1:2017

214 UE 108 EN ISO 15494:2015

Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts

Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components

Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes

Safety requirements for cableway installations designed to carry persons - Calculations

Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Amd 1:2016)

Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)

215 UE 108 EN 15701:2016

216 UE 113 EN 492:2012+A1:2016

217 UE 113 EN 494:2012+A1:2015

218 UE 113 EN 13967:2012+A1:2017

219 UE 113 EN 15814:2011+A2:2014

220 UE 113 EN 16069:2012+A1:2015

221 UE 114 EN 997:2012+A1:2015 WC pans and WC suites with integral trap222 UE 114 EN 12004-1:2017

223 UE 114 EN 13310:2015

224 UE 114 EN 13407:2015

225 UE 114 EN 14428:2015

226 UE 114 EN 14516:2015 Baths for domestic purposes227 UE 114 EN 14527:2016 Shower trays for domestic purposes228 UE 114 EN 14528:2015 Bidets - Functional requirements and test methods229 UE 114 EN 14688:2015

230 UE 114 EN 14891:2017

231 UE 118 EN 716-1:2017

232 UE 118 EN 716-2:2017

233 UE 118 EN 13986:2004+A1:2015

234 UE 118 EN 14915:2013+A1:2017

235 UE 118 EN 14988:2017 Children's high chairs - Requirements and test methods

236 UE 118 EN 16890:2017

237 UE 137 EN 60079-28:2015

238 UE 137 EN 60079-29-1:2016

239 UE 137 EN 60079-30-1:2017

240 UE 137 EN 60079-18:2015/A1:2017

Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods

Fibre-cement slates and fittings - Product specification and test methods

Fibre-cement profiled sheets and fittings - Product specification and test methods

Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification

Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking

Kitchen sinks - Functional requirements and test methods

Wall-hung urinals - Functional requirements and test methods

Shower enclosures - Functional requirements and test methods

Sanitary appliances - Wash basins - Functional requirements and test methods

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking

Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Solid wood panelling and cladding - Characteristics, requirements and marking

Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

241 UE 146 EN 13481-2:2012+A1:2017

242 UE 146 EN 13481-5:2012+A1:2017

243 UE 146 EN 14033-3:2017

244 UE 146 EN 15153-1:2013+A1:2016

245 UE 146 EN 16241:2014+A1:2016 Railway applications - Slack adjuster

246 UE 159 EN 50620:2017 Electric cables - Charging cables for electric vehicles

247 UE 160 EN 50288-1:2013

248 UE 160 EN 50288-10-2:2015

249 UE 160 EN 50288-11-2:2015

250 UE 160 EN 50288-2-1:2013

251 UE 160 EN 50288-2-2:2013

252 UE 160 EN 50288-3-1:2013

253 UE 160 EN 50288-3-2:2013

254 UE 160 EN 50288-4-1:2013

255 UE 160 EN 50288-4-2:2013

Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers

Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps

Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification

Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications

Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications

Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables

Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables

Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables

256 UE 160 EN 50288-5-1:2013

257 UE 160 EN 50288-5-2:2013

258 UE 160 EN 50288-6-1:2013

259 UE 160 EN 50288-6-2:2013

260 UE 169 EN 13480-2:2017 Metallic industrial piping - Part 2: Materials

261 UE 169 EN 13480-4:2017

262 UE 176 EN 50321-1:2018

263 UE 186 EN 12566-7:2016

264 UE 202 EN 10216-1:2013

265 UE 202 EN 10216-2:2013

266 UE 202 EN 10216-3:2013

267 UE 202 EN 10216-4:2013

268 UE 202 EN 10216-5:2013

269 UE 202 EN 10305-6:2016

270 UE 225 EN 303-5:2012

271 UE 225 EN 13203-2:2015

272 UE 225 EN 13278:2013 Open fronted gas-fired independent space heaters

273 UE 225 EN 15502-1:2012+A1:2015

Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables

Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables

Metallic industrial piping - Part 4: Fabrication and installation

Live working - Footwear for electrical protection - Insulating footwear and overboots

Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption

Gas-fired heating boilers - Part 1: General requirements and tests

274 UE 225 EN 15502-2-1:2012+A1:2016

275 UE 238 EN 50229:2015

276 UE 238 EN 60312-1:2017

277 UE 238 EN 60350-1:2016

278 UE 238 EN 60456:2016

279 UE 238 EN 60730-2-5:2015

280 UE 239 EN 50569:2013

281 UE 239 EN 50570:2013

282 UE 239 EN 50570:2013/A1:2018

283 UE 239 EN 50571:2013

284 UE 239 EN 50571:2013/A1:2018

285 UE 239 EN 60335-1:2012/A13:2017

286 UE 239 EN 60335-2-103:2015

287 UE 239 EN 60335-2-3:2016

288 UE 239 EN 60335-2-31:2014

289 UE 239 EN 60335-2-5:2015

290 UE 239 EN 60335-2-58:2005/A12:2016

291 UE 239 EN 60335-2-58:2005/A2:2015

292 UE 239 EN 60335-2-6:2015

293 UE 239 EN 60335-2-95:2015

Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW

Electric clothes washer-dryers for household use - Methods of measuring the performance

Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance

Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance

Clothes washing machines for household use - Methods for measuring the performance

Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems

Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors





Household and similar electrical appliances - Safety - Part 1: General requirements

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

294 UE 255 EN 62841-1:2015

295 UE 255 EN 62841-2-10:2017

296 UE 318 EN 13120:2009+A1:2014

297 UE 318 EN 13120:2009+A1:2014/AC:2015

298 UE 326 EN 14081-1:2016

299 UE 333 EN 61851-23:2014

300 UE 333 EN 61851-23:2014/AC:2016-06

301 UE 333 EN 61851-24:2014

302 UE 335 EN 15651-1:2017

303 UE 335 EN 15651-2:2017

304 UE 335 EN 15651-3:2017

305 UE 335 EN 15651-4:2017

306 UE 335 EN 15651-4:2017/AC:2017

307 UE 338 EN 12878:2014

308 UE 338 EN 15274:2015

309 UE 338 EN 15275:2015

310 UE 347 EN 998-1:2016

311 UE 347 EN 998-2:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers

Internal blinds - Performance requirements including safety

Internal blinds - Performance requirements including safety

Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements

Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station

Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways

Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

General purpose adhesives for structural assembly - Requirements and test methods

Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

Specification for mortar for masonry - Part 1: Rendering and plastering mortar

Specification for mortar for masonry - Part 2: Masonry mortar

312 UE 347 EN 15824:2017

313 UE 364 EN 13361:2018

314 UE 364 EN 13362:2018

315 UE 364 EN 13491:2018

316 UE 364 EN 13492:2018

317 UE 364 EN 13493:2018

318 UE 364 EN 15382:2018

319 UE 364 EN 16993:2018

320 UE 364 EN 16994:2018

321 UE 375 EN 60950-1:2006/A2:2013

322 UE 375 EN 62623:2013

323 UE 377 EN 556-2:2015

324 UE 377 EN 1865-1:2010+A1:2015

325 UE 377 EN 1865-4:2012

326 UE 377 EN 1865-5:2012

327 UE 377 EN 1865-2:2010+A1:2015

328 UE 377 EN ISO 9170-2:2008

329 UE 377 EN ISO 10524-1:2006

330 UE 377 EN ISO 10524-2:2006

331 UE 377 EN ISO 10524-3:2006

Specifications for external renders and internal plasters based on organic binders

Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

Geosynthetic Barriers - Characteristics required for use in the construction of canals

Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures

Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites

Geosynthetic barriers - Characteristics required for use in transportation infrastructure

Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids

Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)

Information technology equipment - Safety - Part 1: General requirements

Desktop and notebook computers - Measurement of energy consumption

Sterilization of medical devices - Requirements for medical devices to be designated ''STERILE" - Part 2: Requirements for aseptically processed medical devices

Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair

Patient handling equipment used in road ambulances - Part 5: Stretcher support

Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher

Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)

Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)

332 UE 377 EN ISO 10524-3:2006/A1:2013

333 UE 377 EN ISO 10524-4:2008

334 UE 377 EN ISO 10651-4:2009

335 UE 377 EN ISO 10651-6:2009

336 UE 377 EN 14683:2014 Medical face masks - Requirements and test methods

337 UE 377 EN ISO 15002:2008

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO 10524-3:2005/Amd 1:2013)

Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)

Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002)

Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004)

Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)

TC

CEN/TC 70 2014/68/EU

CEN/TC 70 2014/68/EU

CEN/TC 70 2014/68/EU

CLC/TC 210 2014/30/EU

CLC/TC 13 2014/30/EU

CLC/TC 13 2014/30/EU

CLC/TC 13 2014/30/EU

CEN/TC 151 2014/30/EU

CEN/TC 185 305/2011

CEN/TC 185 305/2011

CEN/TC 51 305/2011

CEN/TC 241 305/2011

CEN/TC 241 305/2011

Directiva/ Regulament

CEN/TC 51 305/2011

CEN/TC 241 305/2011

CEN/TC 241 305/2011

CEN/TC 51 305/2011

CEN/TC 128 305/2011

CEN/TC 128 305/2011

CEN/TC 129 305/2011

CEN/TC 393 305/2011

CEN/TC 393 305/2011

CEN/TC 393 305/2011

CEN/TC 393 305/2011

CEN/TC 393 305/2011

CEN/TC 226 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 227 305/2011

CEN/TC 226 305/2011

CEN/TC 72 305/2011

CEN/TC 72 305/2011

CEN/TC 191 305/2011

CEN/TC 191 305/2011

CEN/TC 191 305/2011

CEN/TC 130 305/2011

CEN/TC 195 1253/2014

CEN/TC 195 1253/2014

CEN/TC 195 1253/2014

CEN/TC 195 1253/2014

CEN/TC 33 305/2011

CEN/TC 33 305/2011

CEN/TC 33 2014/35/EU

CEN/TC 33 305/2011

CEN/TC 177 305/2011

CEN/TC 104 305/2011

CEN/TC 134 305/2011

CEN/TC 193 305/2011

CEN/TC 193 305/2011

CEN/TC 166 305/2011

CEN/TC 166 305/2011

CEN/TC 166 305/2011

CEN/TC 166 305/2011

CEN/TC 166 305/2011

CLC/TC 111X 617/2013

CLC/TC 111X 617/2013

CLC/TC 111X 617/2013

CLC/TC 111X 617/2013

CEN/TC 136 2001/95/EC

CEN/TC 136 2001/95/EC

CEN/TC 74 2014/68/EU

CEN/TC 69 2014/68/EU

CEN/TC 237 2014/32/EU

CEN/TC 52 2009/48/EC

CEN/TC 52 2009/48/EC

CEN/TC 52 2009/48/EC

CLC/TC 34 244/2009

CLC/TC 34 244/2009

CLC/TC 21X 617/2013

CEN/CLC/JTC 1 765/2008

CEN/SS S26 765/2008

CEN/TC 136 89/686/EEC

CEN/TC 136 89/686/EEC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 151 2006/42/EC

CEN/TC 114 2006/42/EC

CEN/TC 162 89/686/EEC

CEN/TC 162 89/686/EEC

CEN/TC 162 89/686/EEC

CEN/TC 162 89/686/EECCEN/TC 162 89/686/EEC

CEN/TC 162 89/686/EEC

CEN/TC 162 89/686/EEC

CEN/TC 161 89/686/EEC

CEN/TC 161 89/686/EEC

CEN/TC 162 89/686/EEC

CEN/TC 212 2013/29/EU

CEN/TC 212 2013/29/EU

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CEN/TC 285 93/42/EEC














CLC/TC 18X 2013/53/EU

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CEN/SS T01 2013/53/EU

CLC/TC 9X 2008/57/EC






CLC/TC 121A 2014/35/EU

CLC/TC 121A 2006/42/EC

CLC/TC 121A 2014/35/EU

CLC/TC 121A 2014/35/EU

CLC/TC 121A 2014/35/EU

CLC/TC 23BX 2014/35/EU

CLC/TC 23BX 2014/35/EU

CLC/TC 213 2014/35/EU

CLC/TC 213 2014/35/EUCLC/TC 213 2014/35/EU

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CLC/TC 62 93/42/EEC

CLC/TC 65X 2014/35/EU

CLC/SR 66 2014/35/EU

CEN/TC 121 2014/68/EU

CEN/TC 121 2014/68/EU

CEN/TC 121 2014/68/EU

ECISS/TC 107 2014/29/EU

ECISS/TC 111 2014/68/EUECISS/TC 107 2014/68/EU

ECISS/TC 107 2014/68/EUECISS/TC 107 2014/68/EU

CEN/TC 143 2006/42/EC

CEN/TC 144 2006/42/EC

CEN/TC 354 2006/42/EC

CEN/TC 354 2006/42/EC

CEN/TC 10 2014/33/EU

CEN/TC 10 2014/33/EU

CEN/TC 242 2000/9/EC

CEN/TC 242 2000/9/EC

CEN/TC 69 2014/68/EU

CEN/TC 401 2001/95/EC

CEN/TC 260 2003/2003

CEN/TC 155 2014/68/EU

CEN/TC 155 2014/68/EU

CEN/TC 155 97/23/EC

CEN/TC 249 305/2011

CEN/TC 128 305/2011

CEN/TC 128 305/2011

CEN/TC 254 305/2011

CEN/TC 361 305/2011

CEN/TC 88 305/2011

CEN/TC 163 305/2011CEN/TC 67 305/2011

CEN/TC 163 305/2011

CEN/TC 163 305/2011

CEN/TC 163 305/2011

CEN/TC 163 305/2011CEN/TC 163 305/2011CEN/TC 163 305/2011CEN/TC 163 305/2011

CEN/TC 67 305/2011

CEN/TC 207 2001/95/EC

CEN/TC 207 2001/95/EC

CEN/TC 112 305/2011

CEN/TC 175 305/2011

CEN/TC 364 2001/95/EC

CEN/TC 207 2001/95/EC

CLC/TC 31 2014/34/EU

CLC/TC 31 2014/34/EU

CLC/TC 31 2014/34/EU

CLC/TC 31 2014/34/EU

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2006/42/EC

CEN/TC 256 2008/57/EC

CEN/TC 256 2008/57/EC

CLC/TC 20 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CLC/TC 46X 2014/35/EU

CEN/TC 267 2014/68/EU

CEN/TC 267 2014/68/EU

CLC/TC 78 89/686/EEC

CEN/TC 165 305/2011

ECISS/TC 110 2014/68/EU

ECISS/TC 110 2014/68/EU

ECISS/TC 110 2014/68/EU

ECISS/TC 110 2014/68/EU

ECISS/TC 110 2014/68/EU

ECISS/TC 110 2014/68/EU

CEN/TC 57 2006/42/EC

CEN/TC 109 811/2013

CEN/TC 62 2009/142/EC

CEN/TC 109 811/2013


CLC/TC 59X 96/60/EC

CLC/TC 59X 666/2013

CLC/TC 59X 66/2014

CLC/TC 59X 1015/2010

CLC/TC 72 2014/35/EU

CLC/TC 61 2006/42/EC

CLC/TC 61 2006/42/EC

CLC/TC 61 2006/42/EC

CLC/TC 61 2006/42/EC

CLC/TC 61 2006/42/EC

CLC/TC 61 2014/35/EU

CLC/TC 61 2006/42/EC

CLC/TC 61 2014/35/EU

CLC/TC 61 2014/35/EU

CLC/TC 61 2014/35/EU

CLC/TC 61 2006/42/EC

CLC/TC 61 2006/42/EC

CLC/TC 61 2014/35/EU

CLC/TC 61 2006/42/EC

CLC/TC 116 2006/42/EC

CLC/TC 116 2006/42/EC

CEN/TC 33 2001/95/EC

CEN/TC 33 2001/95/EC

CEN/TC 124 305/2011

CLC/TC 69X 2014/35/EU

CLC/TC 69X 2014/35/EU

CLC/TC 69X 2014/35/EU

CEN/TC 349 305/2011

CEN/TC 349 305/2011

CEN/TC 349 305/2011

CEN/TC 349 305/2011

CEN/TC 349 305/2011

CEN/TC 298 305/2011

CEN/TC 193 305/2011

CEN/TC 193 305/2011

CEN/TC 125 305/2011

CEN/TC 125 305/2011

CEN/TC 125 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CEN/TC 189 305/2011

CLC/TC 108X 2014/35/EU

CLC/TC 100X 617/2013











Minister CT Indicativ EN Titlu Faza

1 MADR 95 prEN ISO 9233-1 4020

2 MADR 95 prEN ISO 9233-2 4020

3 MADR 95 EN ISO 11133:2014/prA2 4020

4 MADR 95 prEN ISO 16140-5 4020

5 MADR 95 prEN ISO 16140-3 4020

6 MADR 95 prEN ISO 16140-6 4020

7 MADR 95 prEN ISO 16140-4 4020

8 MADR 95 FprCEN/TS 17174 5020

9 MADR 95 prEN 17194 4020

10 MADR 95 prEN 17203 4020

11 MADR 95 prEN 17212 4020

12 MADR 95 prEN ISO 17678 4020

13 MADR 180 prEN ISO 3961 4020

14 MADR 180 prEN ISO 7971-3 4020

Proiectele de standarde europene CEN-CENELEC cu faze de vot in 2018

Nr crt

Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO/FDIS 9233-1:2017)

Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO/FDIS 9233-2:2017)

Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 2 (ISO 11133:2014/DAmd 2:2017)

Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation of non-proprietary methods (ISO/DIS 16140-5:2017)

Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017)

Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO/DIS 16140-6:2017)

Microbiology of the food chain - Method validation - Part 4: Protocol for single-laboratory (in-house) method validation (ISO/DIS 16140-4:2017)

Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals

Animal feeding stuffs: Methods of sampling and analysis - Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1&B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS/MS

Foodstuffs - Determination of citrinin in food by liquid chromatography tandem mass spectrometry (LC-MS/MS)

Animal Feeding stuffs: Methods of sampling and analsysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)

Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO/DIS 17678:2017)

Animal and vegetable fats and oils - Determination of iodine value (ISO/DIS 3961:2017)

Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO/DIS 7971-3:2017)

15 MADR 180 prEN ISO 7971-2 4020

16 MADR 180 prEN ISO 9167 4020

17 MADR 180 prEN ISO 18363-2 4020

18 MADR 285 EN ISO 11074:2015/prA1 4020

19 MADR 285 prEN ISO 16133 4020

20 MADR 285 prEN ISO 25177 Soil quality - Field soil description (ISO/DIS 25177:2018) 402021 MAI 216 FprCEN/TS 54-14 5020

22 MAI 216 prEN 14972-16 4020

23 MAI 216 FprEN 16712-4 5020

24 MAI 216 prEN 16856 Portable aerosol dispensers for fire extinguishing purposes 4020

25 MAI 376 FprCEN/TS 17091 5020

26 MAI 376 prEN 17173 European CBRNE glossary 402027 MAP 52 prEN ISO 5667-3 4020

28 MAP 52 prEN ISO 5815-1 4020

29 MAP 52 prEN ISO 7027-2 4020

30 MAP 52 prEN ISO 12010 4020

31 MAP 52 EN 13077:2018 5020

32 MAP 52 prEN 17204 4020

33 MAP 52 prEN 17211 4020

34 MAP 52 prEN 17215 4020

35 MAP 52 prEN 17218 4020

36 MAP 52 prEN 17233 4020

Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO/DIS 7971-2:2017)

Rapeseed - Determination of glucosinolates content - Method using high-performance liquid chromatography (ISO/DIS 9167/2017)

Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol (ISO/DIS 18363-2:2017)

Soil quality - Vocabulary - Amendment 1 (ISO 11074:2015/DAM 1:2017)

Soil quality - Guidance on the establishment and maintenance of monitoring programmes

Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance

Fixed firefighting systems - Water mist systems - Part 16: Test protocol for industrial oil cookers for open nozzle systems

Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam generators - Part 4: High expansion foam generators PN16

Crisis management - Guidance for developing a strategic capability

Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO/FDIS 5667-3:2018)

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO/DIS 5815-1:2017)

Water quality - Determination of turbidity - Part 2: Semi-quantitative methods for the assessment of transparency of waters (ISO/DIS 7027-2:2017)

Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO/DIS 12010:2018)

Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B

Water quality - Guidance on analysis of mesozooplankton from marine and brackish water

Water quality - Guidance on mapping of seagrasses and macroalgae in the eulittoral zone

Chemicals used for treatment of water intended for human consumption - Iron-based coagulants - Analytical methods

Water quality - Guidance on sampling of mesozooplankton from marine and brackish water using mesh

Water quality - Guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry

37 MAP 52 FprCEN/TR 17244 5020

38 MAP 52 FprCEN/TR 17245 5020

39 MCIN 380 FprEN 17036 5020

40 MCIN 380 prEN 17187 4020

41 MCSI 138 CLC/FprTR 50682:2017 5020

42 MCSI 138 prEN 60793-1-31:2018 4020

43 MCSI 138 prEN 60793-1-40:2018 Optical fibres - Part 1-40: Attenuation measurement methods 4020

44 MCSI 138 prEN 60793-2-50:2018 4020

45 MCSI 138 prEN 60793-1-32:2018 4020

46 MCSI 138 prEN 60869-1:2018 4020

47 MCSI 138 FprEN 61290-4-3:2018 5020

48 MCSI 138 prEN 62148-21:2018 4020

49 MCSI 138 prEN 62149-10:2018 4020

50 MCSI 138 FprEN 62343-3-4:2018 5020

51 MCSI 204 FprCEN/TR 419030 5020

52 MCSI 204 FprCEN/TR 419040 5020

53 MCSI 204 FprEN 419221-5 5020

54 MCSI 204 FprEN 419241-1 5020

55 MCSI 207 FprEN 50173-1 5020

56 MCSI 207 FprEN 50173-2 5020

57 MCSI 207 FprEN 50173-3 5020

58 MCSI 207 FprEN 50173-6 5020

59 MCSI 207 FprEN 50173-4 5020

60 MCSI 207 FprEN 50173-5 5020

61 MCSI 319 prEN ISO 12381 4020

62 MCSI 319 FprCEN ISO/TS 19293 5020

Water quality - Technical report for the management of diatom barcodes

Water quality - Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses

Conservation of Cultural Heritage - Artificial ageing by simulated solar radiation of the surface of untreated or treated porous inorganic materials

Conservation of cultural heritage - Characterization of mortars used in cultural heritage

Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections

Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength

Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification

Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

Fibre optic active components and devices - Package and interface standards - Part 21: Design guide of electrical interface of PIC packages using Silicon Fine-pitch Ball Grid Array (S-FBGA) and Silicon Fine-pitch Land Grid Array (S-FLGA)

Fibre optic active components and devices - Performance standards - Part 10: RoF (radio over fiber) transceivers for mobile fronthaul

Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches

Rationalized structure for electronic signature standardization - Best practices for SMEs

Rationalized structure for electronic signature standardization - Guidelines for citizens

Protection Profiles for TSP Cryptographic Modules - Part 5: Cryptographic Module for Trust Services

Trustworthy Systems Supporting Server Signing - Part 1: General System Security Requirements

Information technology - Generic cabling systems - Part 1: General requirements

Information technology - Generic cabling systems - Part 2: Office spaces

Information technology - Generic cabling systems - Part 3: Industrial spaces

Information technology - Generic cabling systems - Part 6: Distributed building services

Information technology - Generic cabling systems - Part 4: Homes

Information technology - Generic cabling systems - Part 5: Data centre spaces

Health informatics - Time standards for healthcare specific problems (ISO/DIS 12381:2017)

Health Informatics - Requirements for a record of the dispense of a medicinal product (ISO/PRF TS 19293:2017)



65 MCSI 375 prEN 60268-4:2017 Sound system equipment - Part 4: Microphones 402066 MCSI 375 EN 62368-1:2014/prAB:2018 4020

67 MCSI 375 prEN 62680-1-4:2017 4020

68 MCSI 375 prEN 62680-1-3:2018 4020

69 MCSI 375 prEN 63006:2018 Wireless Power Transfer (WPT) Glossary of Terms (TA 15) 4020

70 MCSI 379 FprCEN/TS 17217 5020

71 MDRAPFE 111 EN 14195:2014/prA1 4020

72 MDRAPFE 113 prEN 13375 4020

73 MDRAPFE 113 prEN 13495 4020

74 MDRAPFE 113 FprEN 13497 5020

75 MDRAPFE 113 FprEN 14064-1 5020

76 MDRAPFE 113 prEN 14695 4020

77 MDRAPFE 113 prEN 16002 4020

78 MDRAPFE 113 FprCEN/TS 16637-1 5020

79 MDRAPFE 113 FprEN 17048 5020

80 MDRAPFE 113 FprEN 17101 5020

81 MDRAPFE 113 FprEN 17140 5020

Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017)

Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017)

Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified)

Universal Serial Bus interfaces for data and power - Part 1-4: Common Components - USB Type-C™ Authentication Specification


Postal services - Reverse envelope - Design and printing requirements

Metal framing components for gypsum board systems - Definitions, requirements and test methods

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation

Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)

Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation

Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics

Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics

Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)

Thermal insulation products for buildings - Factory made Vacuum Insulation Panels (VIP) - Specification

82 MDRAPFE 113 prEN 17190 Flexible sheets for waterproofing - Solar Reflectance Index 4020

83 MDRAPFE 113 FprCEN/TS 17195 5020






89 MDRAPFE 114 prEN ISO 10545-4 4020

90 MDRAPFE 114 FprCEN/TR 17221 5020

91 MDRAPFE 115 prEN 16140 4020

92 MDRAPFE 122 FprEN 1279-6 5020

93 MDRAPFE 122 FprEN 1279-5 5020

94 MDRAPFE 122 FprEN 1279-1 5020

95 MDRAPFE 122 FprEN 1279-4 5020

96 MDRAPFE 122 FprEN 1279-2 5020

97 MDRAPFE 122 FprEN 1279-3 5020

98 MDRAPFE 122 prEN 12150-2 4020

99 MDRAPFE 122 prEN 12898 Glass in building - Determination of the emissivity 4020100 MDRAPFE 122 prEN 14179-2 4020

101 MDRAPFE 122 prEN 14449 4020

102 MDRAPFE 122 prEN 16612 4020

103 MDRAPFE 122 FprEN 17074 5020

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates

Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES)

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS)

Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests

Construction products - Assessment of release of dangerous substances - Determination of activity concentrations of radium-226, thorium-232 and potassium-40 in construction products using semiconductor gamma-ray spectrometry

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO/DIS 10545-4:2017)

Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances

Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles

Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests

Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality

Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts

Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration

Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances

Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Product standard

Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Product standard

Glass in building - Laminated glass and laminated safety glass - Product standard

Glass in building - Determination of the lateral load resistance of glass panes by calculation

Glass in building - Environmental product declaration - Product category rules for flat glass products

104 MDRAPFE 136 FprHD 60364-7-719 5020

105 MDRAPFE 136 4020

106 MDRAPFE 136 HD 60364-4-42:2011/prAB:2017 4020

107 MDRAPFE 136 FprHD 60364-7-711:2017 5020

108 MDRAPFE 187 FprEN 1793-2 5020

109 MDRAPFE 187 FprEN 1793-6 5020

110 MDRAPFE 187 FprEN 12697-26 Bituminous mixtures - Test methods - Part 26: Stiffness 5020111 MDRAPFE 187 FprEN 12697-12 5020

112 MDRAPFE 187 FprEN 12697-24 5020

113 MDRAPFE 187 EN 12697-2:2015/prA1 4020

114 MDRAPFE 187 prEN 12697-32 4020

115 MDRAPFE 187 prEN 12697-31 4020

116 MDRAPFE 187 prEN 12697-54 4020

117 MDRAPFE 187 prEN 12697-55 4020

118 MDRAPFE 187 prEN 12697-53 4020

119 MDRAPFE 187 prEN 12697-56 4020

120 MDRAPFE 187 prEN 12767 4020

121 MDRAPFE 187 prEN 13074-2 4020

122 MDRAPFE 187 prEN 13074-1 4020

123 MDRAPFE 187 prEN 13108-31 4020

124 MDRAPFE 187 FprEN 13302 5020

Low-voltage installations - Part 7-719: Requirements for special installations or locations - Lighting installations for advertising signs with a rated output voltage not exceeding 1 000 V, which are illuminated by hot-cathode-fluorescent-lamps, luminous-discharge tubes (neon-tubes), inductive discharge lamps, light emitting diodes (LED) and/or LED modules

HD 60364-7-709:2009/prAA:2017

Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Harbours, marinas and similar locations - Special requirements for shore supply to ships

Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects

Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions

Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens

Bituminous mixtures - Test methods - Part 24: Resistance to fatigue

Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor

Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion

Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion

Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method

Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction

Passive safety of support structures for road equipment - Requirements and test methods

Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation

Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation

Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion

Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus

125 MDRAPFE 187 FprEN 13880-13 5020

126 MDRAPFE 187 FprEN 13880-10 5020

127 MDRAPFE 240 FprEN 12665 5020

128 MDRAPFE 276 prEN ISO 9053 4020

129 MDRAPFE 276 EN 16205:2013/FprA1 Laboratory measurement of walking noise on floors 5020130 MDRAPFE 276 FprCEN/TR 16961 Declaration of uncertainties in test reports 5020131 MDRAPFE 281 EN ISO 12570:2000/prA2 4020

132 MDRAPFE 302 prEN 448 4020

133 MDRAPFE 302 prEN 488 4020

134 MDRAPFE 302 prEN 14419 4020

135 MDRAPFE 302 prEN 15698-1 4020

136 MDRAPFE 302 prEN 15698-2 4020

137 MDRAPFE 302 prEN 17192 4020

138 MDRAPFE 302 prEN ISO 29463-4 4020

139 MDRAPFE 302 prEN ISO 29463-2 4020

140 MDRAPFE 302 prEN ISO 29463-3 4020

141 MDRAPFE 302 prEN ISO 29463-5 4020

142 MDRAPFE 318 prEN 1527 4020

143 MDRAPFE 318 FprEN 12519 Windows and pedestrian doors - Terminology 5020144 MDRAPFE 318 prEN 12978 4020

Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

Light and lighting - Basic terms and criteria for specifying lighting requirements

Acoustics - Determination of static airflow resistance (ISO/DIS 9053:2017)

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 2 (ISO 12570:2000/FDAM 2:2017)

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene

District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems

District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene

District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene

Ductwork - Non-metallic ductwork - Requirements and test methods

High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-Scan method (ISO 29463-4:2011)

High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)

High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011)

High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements (ISO 29463-5:2011)

Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods

Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods

145 MDRAPFE 318 FprEN 13126-6 5020

146 MDRAPFE 318 prEN 13126-17 4020

147 MDRAPFE 318 prEN 13126-15 4020

148 MDRAPFE 318 prEN 13126-16 4020

149 MDRAPFE 318 EN 16758:2016/prA1:2017 4020

150 MDRAPFE 318 prEN 17213 4020

151 MDRAPFE 321 prEN 1097-8 4020

152 MDRAPFE 321 prEN 1097-2 4020

153 MDRAPFE 321 FprEN 12390-15 5020

154 MDRAPFE 321 FprEN 12390-14 5020

155 MDRAPFE 326 EN 384:2016/prA1 4020

156 MDRAPFE 335 prEN ISO 19650-1 4020

157 MDRAPFE 335 prEN ISO 19650-2 4020

158 MDRAPFE 343 prEN 1337-2 Structural bearings - Part 2: Sliding elements 4020159 MDRAPFE 343 prEN 1337-3 Structural bearings - Part 3: Elastomeric bearings 4020160 MDRAPFE 343 prEN 1337-4 Structural bearings - Part 4: Roller bearings 4020161 MDRAPFE 343 prEN 1337-5 Structural bearings - Part 5: Pot bearings 4020162 MDRAPFE 343 prEN 1337-6 Structural bearings - Part 6: Rocker bearings 4020163 MDRAPFE 343 prEN 1337-7 4020

164 MDRAPFE 343 prEN 1337-8 4020

165 MDRAPFE 343 prEN 1337-1 Structural bearings - Part 1: General 4020166 MDRAPFE 343 FprEN 1992-4 5020

167 MDRAPFE 343 FprEN 15129 Anti-seismic devices 5020168 MDRAPFE 343 FprCEN/TR 17231 5020

169 MDRAPFE 346 prEN 62305-1:2017/prAA:2017 Protection against lightning - Part 1: General principles 4020

170 MDRAPFE 347 prEN 772-22 4020

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction stay)

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 17: Hardware for Tilt and Slide windows

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 15: Rollers for horizontal sliding and hardware for sliding folding windows

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows

Curtain walling - Determination of the strength of sheared connections - Test method and requirements

Windows and doors - Environmental Product Declarations - Product category rules for windows and pedestrian doorsets

Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value

Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation

Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process

Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process

Structural timber - Determination of characteristic values of mechanical properties and density

Organization of information about construction works - Information management using building information modelling - Part 1: Concepts and principles (ISO/DIS 19650-1:2018)

Organization of information about construction works - Information management using building information modelling - Part 2: Delivery phase of the assets (ISO/DIS 19650-2:2018)

Structural bearings - Part 7: Spherical and cylindrical PTFE bearings

Structural bearings - Part 8: Guide bearings and Restraint bearings

Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete

Eurocode 1: Actions on Structures - Traffic Loads on Bridges - Track-Bridge Interaction

Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units

171 MDRAPFE 347 prEN 1015-11 4020

172 MDRAPFE 347 prEN 17193 Clay blocks for floor plates 4020173 MDRAPFE 361 FprEN ISO 17892-9 5020

174 MDRAPFE 361 FprEN ISO 22477-4 5020

175 MDRAPFE 364 prEN ISO 11058 4020

176 MDRAPFE 364 prEN ISO 12957-1 4020

177 MDRAPFE 365 FprEN ISO 41001 5020

178 MDRAPFE 365 prEN ISO 41011 Facility management - Vocabulary (ISO 41011:2017) 4020179 MDRAPFE 365 prEN ISO 41012 4020

180 MDRAPFE 393 EN 16475-3:2016/prA1 4020

181 ME 1 4020

182 ME 3 EN 60076-3:2013/FprA1:2018 5020

183 ME 5 prEN 60112:2017 4020

184 ME 5 prEN 61857-32:2017 4020

185 ME 5 prEN 62631-3-4:2017 4020

186 ME 8 prEN 50064:2017 4020

187 ME 8 prEN 50068:2017 4020

188 ME 8 prEN 50069:2017 4020

189 ME 9 EN 60947-2:2017/prA1:2017 4020

190 ME 9 prEN 60947-7-4:2017 4020

191 ME 11 FprEN 50642 5020

192 ME 11 FprEN 60320-2-4:2017 5020

193 ME 11 FprEN 60320-2-3:2017 5020

Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/FDIS 17892-9:2017)

Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles dynamic load testing (ISO/FDIS 22477-4:2017)

Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO/DIS 11058:2017)

Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO/DIS 12957-1:2018)

Facility management - Management systems - Requirements with guidance for use (ISO/FDIS 41001:2018)

Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)

Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

EN 60034-18-41:2014/prA1:2018

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

Method for the determination of the proof and the comparative tracking indices of solid insulating materials

Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing

Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures

High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures

High-voltage switchgear and controlgear - Gas-filled wrought steel enclosures

High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

Cable management systems - Test method for content of halogens

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0

194 ME 11 EN 60320-3:2014/prA1:2017 4020

195 ME 11 EN 60320-1:2015/prA1:2017 4020

196 ME 11 FprEN 60320-2-1:2017 5020

197 ME 11 FprEN 60799:2017 5020

198 ME 11 EN 62423:2012/prAA:2017 4020

199 ME 11 EN IEC 62613-2:2018 5020

200 ME 11 EN IEC 62613-1:2018 5020

201 ME 11 prEN 62962:2017 Particular requirements for load-shedding equipment (LSE) 4020

202 ME 11 FprEN 63024:2017/FprAA:2017 5020

203 ME 12 EN 60269-6:2011/prA1:2018 4020

204 ME 15 EN IEC 65700:2018 Bushings for DC application 4020205 ME 17 FprEN 60749-13:2017 5020

206 ME 17 prEN 61967-1:2018 4020

207 ME 17 prEN 62435-6:2017 4020

208 ME 17 FprEN 62969-2:2017 5020

209 ME 17 prEN 63011-1:2017 4020

210 ME 17 prEN 63011-2:2017 4020

211 ME 17 prEN 63150-1:2018 4020

212 ME 18 prEN 61837-2:2017 4020

213 ME 18 prEN 62884-3:2017 4020

214 ME 19 CLC/FprTR 50625-6 5020

215 ME 20 FprEN 63093-7:2018 5020

Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

Appliance couplers for household and similar general purposes - Part 1: General requirements

Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers

Electrical accessories - Cord sets and interconnection cord sets

Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements

Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses

Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere

Integrated circuits - Measurement of electromagnetic emissions - Part 1: General conditions and definitions

Electronic components - Long-term storage of electronic semiconductor devices - Part 6: Packaged or Finished Devices

Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors

Integrated circuits - Three dimensional integrated circuits - Part 1: General conditions and definitions

Integrated circuits - Three dimensional integrated circuits - Part 2: Alignment of stacked dies having fine pitch interconnect

Semiconductor devices - Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment - Part 1: Arbitrary and random mechanical vibrations

Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures

Measurement techniques of piezoelectric, dieletric and electrostatic oscillators - Part 3: Frequency aging test methods

Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores

216 ME 20 prEN 63093-6:2018 4020

217 ME 20 prEN 63093-11:2018 4020

218 ME 20 prEN 63093-5:2018 4020

219 ME 20 prEN 63093-8:2018 4020

220 ME 21 FprEN 60317-74:2017 5020

221 ME 21 FprEN 60317-73:2017 5020

222 ME 23 FprEN 60204-1:2017 5020

223 ME 23 prEN 60746-4:2017 4020

224 ME 23 prEN 61131-10:2017 4020

225 ME 23 FprEN 62046:2018 5020

226 ME 23 prEN 62443-3-2:2017 4020

227 ME 23 FprEN 62714-1:2018 5020

228 ME 23 prEN 62769-100:2017 4020

229 ME 23 prEN 62769-115-2:2018 4020

230 ME 23 FprEN 62828-3:2018 5020

231 ME 24 prEN 61010-2-051:2017 4020

232 ME 24 prEN 61010-2-061:2017 4020

233 ME 24 prEN 61010-2-101:2017 4020

234 ME 24 prEN 61010-2-081:2018 4020

235 ME 26 prEN 61265:2017 4020

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores

Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180

Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors

XML Exchange Formats for Programs according to IEC 61131-3

Safety of machinery - Application of protective equipment to detect the presence of persons

Security for industrial automation and control systems - Part 3-2: Security risk assessment and system design

Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements

Field device integration (FDI) - Part 100: Profiles - Generic protocols

Field device integration (FDI) – Part 115-2: Profiles – Modbus-RTU

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft

236 ME 27 CLC/FprTS 50134-9:2018 5020

237 ME 27 EN 50136-1:2012/FprA1:2018 5020

238 ME 27 prEN 62676-2-32:2017 4020

239 ME 27 prEN 62676-2-31:2017 4020

240 ME 27 FprEN 62820-3-2:2017 5020

241 ME 30 prEN 55012:2017 4020

242 ME 30 prEN 55036:2017 4020

243 ME 30 EN 61000-2-2:2002/prA2:2017 4020

244 ME 35 prEN 60904-7:2017 4020

245 ME 35 prEN 60904-3:2017 4020

246 ME 35 prEN 62788-1-7:2017 4020

247 ME 35 prEN 62892:2017 Test procedure for extended thermal cycling of PV modules 4020

248 ME 36 prEN 60633:2018 4020

249 ME 36 EN 62747:2014/prA1:2018 4020

250 ME 36 EN 62751-2:2014/prA1:2018 4020

251 ME 39 FprEN 1395-5 5020

252 ME 39 FprEN 13507 5020

253 ME 39 FprEN ISO 14918 5020

254 ME 39 FprEN 17001 5020

255 ME 39 FprEN 17002 5020

256 ME 39 prEN ISO 20378 4020

Alarm systems - Social alarm systems - Part 9: IP Communications Protocol

Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems

Video surveillance systems for use in security applications - Part 2-32: Video transmission protocols - IP interoperability implementation based on Web services - Recording

Video surveillance systems for use in security applications - Part 2-31: Video transmission protocols - IP interoperability implementation based on Web services - Live streaming and configuration

Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems

Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

Electric and hybrid road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices

Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

Measurement procedures for materials used in photovoltaic modules - Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials

Terminology for high-voltage direct current (HVDC) transmission

Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems

Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters

Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers

Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying

Thermal spraying - Qualification testing of thermal sprayers (ISO/FDIS 14918:2018)

Thermal spraying - Components with thermally sprayed coatings - Coating specification

Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification

Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017)

257 ME 39 FprEN ISO 21904-3 5020

258 ME 40 prEN 12679 4020

259 ME 42 FprEN ISO 4829-1 5020

260 ME 42 prEN ISO 4885 4020

261 ME 42 prEN ISO 4945 4020

262 ME 42 prEN ISO 6892-2 4020

263 ME 42 prEN ISO 7500-1 4020

264 ME 42 EN 10139:2016/prA1 4020

265 ME 42 prEN 10225-4 4020

266 ME 42 FprEN 10277 Bright steel products - Technical delivery conditions 5020267 ME 42 prEN 10283 Corrosion resistant steel castings 4020268 ME 42 FprCEN/TR 10366 5020

269 ME 46 FprEN ISO 3923-1 5020

270 ME 46 FprEN ISO 4490 5020

271 ME 47 FprEN 1563 Founding - Spheroidal graphite cast irons 5020272 ME 56 FprEN ISO 9004 5020

273 ME 58 FprEN ISO 5458 5020

274 ME 58 prEN ISO 5459 4020

275 ME 59 FprEN 1114-3 5020

276 ME 59 prEN ISO 3506-1 4020

277 ME 59 prEN ISO 3506-2 4020

278 ME 59 FprEN 12012-1 5020

279 ME 66 FprEN 13451-11 5020

Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO/FDIS 21904-3:2017)

Non destructive testing - Determination of the size of industrial radiographic sources - Radiographic method

Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO/FDIS 4829-1:2016)

Ferrous materials - Heat treatments - Vocabulary (ISO/FDIS 4885:2017)

Steel - Determination of nitrogen - Spectrophotometric method (ISO/DIS 4945:2017)

Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO/FDIS 6892-2:2017)

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO/FDIS 7500-1:2017)

Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections

Steel for the reinforcement of concrete - Weldable reinforcing steels - Reinforcement bars de-coiled by processor

Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO/FDIS 3923-1:2018)

Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO/FDIS 4490:2018)

Quality management - Quality of an organization - Guidance to achieve sustained success (ISO/FDIS 9004:2018)

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO/FDIS 5458:2017)

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO/DIS 5459.2:2017)

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-1:2018)

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-2:2018)

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders

Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads

280 ME 66 prEN 14960-1 4020

281 ME 66 FprEN 17115 5020

282 ME 66 prEN 17206 4020

283 ME 66 FprCEN/TR 17207 5020

284 ME 77 FprEN 13525 Forestry machinery - Wood chippers - Safety 5020285 ME 78 prEN ISO 15118-1 4020

286 ME 78 prEN 16662-1 4020

287 ME 78 prEN 17186 4020

288 ME 78 FprEN ISO 18243 5020

289 ME 85 EN 81-28:2018 5020

290 ME 85 prEN 81-40 4020

291 ME 85 FprEN 81-71 5020

292 ME 85 prEN 1175 Safety of industrial trucks - Electrical/electronic requirements 4020

293 ME 85 prEN 1459-7 4020

294 ME 85 FprCEN/TS 1459-8 5020

295 ME 85 prEN 12016 4020

296 ME 85 EN 13001-3-5:2016/prA1 4020

297 ME 85 prEN 15011 Cranes - Bridge and gantry cranes 4020298 ME 85 prEN 16307-3 4020

299 ME 85 prEN 16307-2 4020

300 ME 85 prEN 16796-4 4020

301 ME 85 prEN ISO 24134 4020

302 ME 88 prEN 131-6 Ladders - Part 6: Telescopic ladders 4020303 ME 88 prEN 131-4 Ladders - Part 4: Single or multiple hinge-joint ladders 4020

Inflatable play equipment - Part 1: Safety requirements and test methods

Entertainment technology - Specifications for design and manufacture of aluminium and steel trusses

Entertainment Technology - Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry - Specifications for general requirements (excluding aluminum and steel trusses and towers)

Playground and recreational areas - requirements for quality of inspections and competence of inspectors

Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO/DIS 15118-1:2017)

Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 1 : General safety and performance requirements

Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply

Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts

Rough-terrain trucks - Safety requirements and verification - Part 7: Test method and determination of noise emission

Rough-terrain trucks - Safety requirements and verification - Part 8: Variable-reach tractors

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks

Industrial trucks - Safety requirements and verification - Part 3 Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)

Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks

Energy efficiency of industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks

Industrial trucks - Additional requirements for automated functions on trucks (ISO 24134:2006)

304 ME 89 EN 12516-4:2014/FprA1 5020

305 ME 89 EN 12516-1:2014/FprA1 5020

306 ME 102 prEN ISO 17226-2 4020

307 ME 102 prEN ISO 17226-1 4020

308 ME 102 FprEN ISO 20863 5020

309 ME 102 prEN ISO 22700 4020

310 ME 103 FprEN ISO 811 5020

311 ME 103 FprEN ISO 3175-4 5020

312 ME 103 prEN ISO 9092 Textiles - Nonwovens - Definition (ISO/DIS 9092:2018) 4020313 ME 103 prEN ISO 10325 4020

314 ME 103 FprEN ISO 15496 5020

315 ME 103 FprEN 16779-1 5020

316 ME 103 FprEN 16780 5020

317 ME 103 FprEN 16781 5020

318 ME 103 FprCEN/TR 17222 5020

319 ME 103 FprEN ISO 20418-1 5020

320 ME 105 prEN 12944-3 4020

321 ME 105 FprEN 17041 5020

322 ME 105 FprEN 17042 5020

323 ME 105 FprEN 17043 5020

324 ME 108 prEN ISO 307 Plastics - Polyamides - Determination of viscosity number 4020

325 ME 108 prEN 513 4020

326 ME 108 FprEN ISO 877-3 5020

Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells

Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO/DIS 17226-2:2017)

Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO/DIS 17226-1:2017)

Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO/FDIS 20863:2017)

Leather - Measurement of the colour and colour difference of finished leather (ISO/DIS 22700:2017)

Textile - Determination of resistance to water penetration - Hydrostatic pressure test (ISO/FDIS 811:2018)

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO/FDIS 3175-4:2017)

Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO/DIS 10325:2018)

Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO/FDIS 15496:2016)

Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 1: Duvet (excluding duvet covers)

Textile child care articles - Safety requirements and test methods for children's cot bumpers

Textile child care articles - Safety requirements and test methods for children's sleep bags for use in a cot

Textile products and nanotechnologies - Guidance on tests to simulate nanoparticle release - Skin exposure

Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO/FDIS 20418-1:2018)

Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials

Fertilizers - Determination of boron in concentrations ? 10 % using spectrometry with azomethine-H

Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration

Fertilizers - Determination of molybdenum in concentrations ? 10 % using spectrometry of a complex with ammonium thiocyanate

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering

Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO/FDIS 877-3:2018)

327 ME 108 prEN 1519-1 4020

328 ME 108 prEN 1762 4020

329 ME 108 prEN ISO 11296-7 4020

330 ME 108 prEN ISO 11299-1 4020

331 ME 108 prEN ISO 11299-3 4020

332 ME 108 prEN ISO 11299-2 4020

333 ME 108 FprEN ISO 11357-3 5020

334 ME 108 FprEN ISO 11357-6 5020

335 ME 108 prEN ISO 13257 4020

336 ME 108 FprEN ISO 13259 5020

337 ME 108 EN 13476-3:2018 5020

338 ME 108 EN 13476-1:2018 5020

339 ME 108 EN 13476-2:2018 5020

340 ME 108 prEN 14243-2 4020

341 ME 108 prEN 14243-3 4020

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system

Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO/DIS 11296-7:2018)

Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO/DIS 11299-1:2018)

Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO/DIS 11299-3:2018)

Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO/DIS 11299-2:2018)

Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO/FDIS 11357-3:2017)

Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/FDIS 11357-6:2017)

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO/DIS 13257:2018)

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO/DIS 13259:2017)

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining their dimension(s) and impurities, including free steel and free textile content

Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions

342 ME 108 prEN 14243-1 4020

343 ME 108 prEN 14728 Imperfections in thermoplastic welds - Classification 4020344 ME 108 prEN ISO 15494 4020

345 ME 108 FprEN 15860 5020

346 ME 108 FprEN 16903 5020

347 ME 108 FprEN 16904 5020

348 ME 108 prEN 17176-1 4020

349 ME 108 prEN 17176-2 4020

350 ME 108 prEN 17176-5 4020

351 ME 108 prEN 17176-3 4020

352 ME 108 FprCEN/TS 17188 5020

353 ME 108 FprCEN/TS 17189 5020

354 ME 108 FprCEN/TR 17219 5020

355 ME 108 FprEN ISO 21225-1 5020

356 ME 108 FprEN ISO 21225-2 5020

357 ME 108 FprEN ISO 29988-2 5020

358 ME 108 FprEN ISO 29988-1 5020

359 ME 109 EN 1434-2:2015/prA1 Thermal energy meters - Part 2: Constructional requirements 4020

Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)

Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods

Plastics piping systems - Environmental product declarations - Product Category Rules complementary to EN 15804, for buried plastics piping systems

Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, for plastic piping systems inside buildings

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes

Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system

Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings

Materials obtained from end of life tyres (ELTs) - Sampling method for granulates and powders stored in big-bags

Materials obtained from end of life tyres (ELTs) - Determination of the true density of granulates - Method based on water pycnometry

Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO/FDIS 21225-1:2017)

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO/FDIS 21225-2:2017)

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 29988-2:2018)

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/FDIS 29988-1:2018)

360 ME 109 EN 1434-6:2015/prA1 4020

361 ME 109 EN 1434-1:2015/prA1 Thermal energy meters - Part 1: General requirements 4020362 ME 109 EN 1434-5:2015/prA1 Thermal energy meters - Part 5: Intitial verification tests 4020363 ME 109 EN 1434-4:2015/prA1 Thermal energy meters - Part 4: Pattern approval tests 4020364 ME 109 prEN 12405-1 Gas meters - Conversion devices - Part 1: Volume conversion 4020

365 ME 109 prEN 13757-4 4020

366 ME 109 EN 13757-7:2018 5020

367 ME 109 EN 13757-3:2018 5020

368 ME 109 EN 13757-2:2018 5020

369 ME 109 FprCEN/TS 17171 Management of observed hydrometric data - Guidance 5020370 ME 118 prEN 844 Round and sawn timber - Terminology 4020371 ME 118 prEN 1130 4020

372 ME 118 FprEN 13756 Wood flooring and parquet - Terminology 5020373 ME 118 FprEN 16770 5020

374 ME 118 FprCEN/TS 16818 5020

375 ME 118 prEN 17191 4020

376 ME 118 prEN 17214 Visual assessment of furniture surfaces 4020377 ME 118 FprEN ISO 19085-4 5020

378 ME 119 prEN 14175-3 Fume cupboards - Part 3: Type test methods 4020379 ME 119 prEN ISO 20504 4020

380 ME 125 EN 71-3:2013+A2:2017/prA3 Safety of toys - Part 3: Migration of certain elements 4020381 ME 125 EN 1400:2013+A1:2014/FprA2 5020

382 ME 125 FprEN 1888-1 5020

383 ME 125 FprEN 1888-2 5020

384 ME 125 FprCEN/TR 13387-3 5020

385 ME 125 FprCEN/TR 13387-2 5020

386 ME 125 FprCEN/TR 13387-5 5020

387 ME 125 FprCEN/TR 15371-2:2017 5020

388 ME 125 FprCEN/TR 15371-2:2017 5020

389 ME 125 EN 16232:2013/FprA1:2018 Child use and care articles - Infant swings 5020390 ME 125 prEN 17072 4020

391 ME 128 prEN 60255-181:2018 4020

392 ME 128 FprEN 62246-1-1:2017 5020

Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance

Communication systems for meters - Part 4: Wireless M-Bus communication

Communication systems for meters - Part 7: Transport and security services

Communication systems for meters - Part 3: Application protocols

Communication systems for meters - Part 2: Wired M-Bus communication

Children's Furniture - Cribs and cradles - Safety requirements and test methods

Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements

Durability of wood and wood-based products - Moisture dynamics of wood and wood-based products

Children’s Furniture - Seating for children - Safety requirements and test methods

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO/FDIS 19085-4:2017)

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive behaviour (ISO/DIS 20504:2017)

Child use and care articles - Soothers for babies and young children - Safety requirements and test methods

Child use and care articles - Wheeled child conveyances - Part 1: Pushchairs and prams

Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg

Child care articles - General safety guidelines - Part 3: Mechanical hazards

Child care articles - General safety guidelines - Part 2: Chemical hazards

Child care articles - General safety guidelines - Part 5: Product information

Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series

Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series

Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods

Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection

Reed switches - Part 1-1: Generic specification - Blank detail specification

393 ME 129 FprEN 60974-9:2018 Arc welding equipment - Part 9: Installation and use 5020394 ME 129 prEN 60974-14:2018 Arc welding equipment - Part 14: Performance verification 4020

395 ME 129 prEN 60974-5:2018 Arc welding equipment - Part 5: Wire feeders 4020396 ME 129 prEN 60974-7:2018 Arc welding equipment - Part 7:Torches 4020397 ME 129 prEN 60974-2:2018 Arc welding equipment - Part 2: Liquid cooling systems 4020398 ME 129 prEN 60974-3:2018 4020

399 ME 131 EN 60061-4:1992/FprA16:2018 5020

400 ME 131 EN 60081:1998/A11:2018 5020

401 ME 131 prEN 60969:2017 4020

402 ME 131 FprEN 61167:2017 Metal halide lamps - Performance specification 5020403 ME 131 FprEN 61347-2-14:2017 5020

404 ME 131 FprEN 62031:2017 LED modules for general lighting - Safety specifications 5020405 ME 131 EN 62386-103:2014/prA1:2017 4020

406 ME 131 EN 62386-102:2014/prA1:2017 4020

407 ME 131 EN 62386-101:2014/prA1:2017 4020

408 ME 131 FprEN 62386-217:2018 5020

409 ME 131 FprEN 62386-218:2018 5020

410 ME 131 prEN 62386-220:2018 4020

411 ME 131 FprEN 62386-216:2018 5020

412 ME 131 FprEN 62386-222:2018 5020

413 ME 131 FprEN 62386-207:2018 5020

414 ME 131 EN 62504:2014/FprA1:2017 5020

415 ME 131 EN 62560:2012/prAA:2017 4020

416 ME 131 EN 62717:2017/prA2:2017 LED modules for general lighting - Performance requirements 4020

417 ME 135 prEN 60286-3:2018 4020

418 ME 135 prEN 60384-17:2018 4020

419 ME 135 prEN 60384-21:2018 4020

420 ME 135 prEN 60384-22:2018 4020

Arc welding equipment - Part 3: Arc striking and stabilizing devices

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

Double-capped fluorescent lamps - Performance specifications

Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements

Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps

Digital addressable lighting interface - Part 103: General requirements - Control devices

Digital addressable lighting interface - Part 102: General requirements - Control gear

Digital addressable lighting interface - Part 101: General requirements - System components

Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)

Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming Curve Selection (device type 17)

Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally Supplied DC Emergency Operation (device type 19)

Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)

Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)

Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors

Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

421 ME 140 EN 61850-4:2011/prA1:2017 4020

422 ME 140 prEN 61968-4:2017 4020

423 ME 140 FprEN 61970-456:2017 5020

424 ME 140 FprEN 61970-302:2018 5020

425 ME 140 FprEN 62325-301:2017 5020

426 ME 140 FprEN 62325-451-6:2018 5020

427 ME 140 prEN 62325-503:2018 4020

428 ME 144 prEN 31010:2017 Risk management - Risk assessment techniques 4020429 ME 145 prEN 60297-3-110:2017 4020

430 ME 145 prEN 60512-1:2017 4020

431 ME 145 prEN 60512-99-002:2017 4020

432 ME 145 prEN 60512-28-100:2017 4020

433 ME 145 EN 60603-7:2009/prA2:2017 4020

434 ME 145 prEN 61076-2-114:2017 4020

435 ME 145 EN 61076-1:2006/prA1:2017 4020

436 ME 145 prEN 61076-3-124:2018 4020

437 ME 147 prEN 12102-2 4020

438 ME 147 FprEN ISO 21012 Cryogenic vessels - Hoses (ISO/FDIS 21012:2017) 5020439 ME 152 EN 13445-2:2014/prA6 Unfired pressure vessels - Part 2: Materials 4020440 ME 152 EN 13445-3:2014/prA8 Unfired pressure vessels - Part 3: Design 4020441 ME 152 EN 13445-5:2014/prA2 Unfired pressure vessels - Part 5: Inspection and testing 4020

442 ME 154 prEN ISO 9902-6 4020

Communication networks and systems for power utility automation - Part 4: System and project management

Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management

Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles

Energy Management System Application Program Interface (EMS-API) - Part 302: Common information model (CIM) dynamics

Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets

Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets

Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC 62325-351 profile

Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) Series - Part 110: residential racks and cabinets for smart houses

Connectors for electronic equipment - Tests and measurements - Part 1: General

Connectors for electronic equipment - tests and measurements - Part 99-002: Endurance test schedules - Test 99b, Test schedule for unintended unmating under electrical load

Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Connectors for electronic equipment - product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz

Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO/DIS 9902-6:2018)

443 ME 157 FprEN ISO 2081 5020

444 ME 157 prEN ISO 4531 4020

445 ME 157 prEN ISO 7539-6 4020

446 ME 157 prEN ISO 11177 4020

447 ME 160 EN 62153-4-7:2016/FprA1:2018 5020

448 ME 161 prEN 62282-3-100:2017 4020

449 ME 161 prEN 62282-6-400:2018 4020

450 ME 161 FprEN 62485-2:2017 5020

451 ME 161 FprEN 62485-4:2017 5020

452 ME 161 FprEN 62485-1:2017 5020

453 ME 161 prEN 62660-1:2017 4020

454 ME 161 prEN 62660-2:2017 4020

455 ME 161 prEN 62902:2018 4020

456 ME 161 prEN 62932-2-1:2017 4020

457 ME 161 prEN 62932-1:2017 4020

458 ME 161 prEN 62932-2-2:2017 4020

459 ME 161 FprEN 62933-1:2017 Electrical Energy Storage (EES) systems - Part 1: Vocabulary 5020

460 ME 162 FprEN 60071-2:2017 5020

461 ME 166 prEN 60051-9:2018 4020

462 ME 167 EN 50160:2010/prA2:2017 4020

463 ME 167 EN 50160:2010/prA3:2017 4020

464 ME 169 prEN ISO 10426-3 4020

Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO/FDIS 2081:2017)

Vitreous and porcelain enamels - Migration from enamelled ware in contact with food - Method of test and permissible limits (ISO/DIS 4531:2017)

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO/DIS 7539-6:2017)

Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO/DIS 11177:2018)

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method

Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability

Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries

Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances

Safety requirements for secondary batteries and battery installations - Part 1: General safety information

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

Secondary batteries: Marking symbols for identification of their chemistry

Flow Battery Energy Systems for Stationary applications - Part 2-2: Performance general requirements and test methods

Flow battery systems for stationary applications - Part 1: Terminology

Flow Battery Systems for Stationary applications - Part 2-2: Safety requirements

Insulation co-ordination - Part 2: Application guidelines (Proposed horizontal standard)

Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods



Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO/DIS 10426-3:2018)

465 ME 169 prEN ISO 10426-4 4020

466 ME 169 FprEN ISO 10855-3 5020

467 ME 169 FprEN ISO 10855-1 5020

468 ME 169 FprEN ISO 10855-2 5020

469 ME 169 FprEN 12285-1 5020

470 ME 169 EN 13480-1:2017/prA1:2017 Metallic industrial piping - Part 1: General 4020471 ME 169 prEN 14015 4020

472 ME 169 prEN ISO 19345-2 4020

473 ME 169 prEN ISO 19900 4020

474 ME 169 prEN ISO 19901-7 4020

475 ME 169 prEN ISO 19904-1 4020

476 ME 171 EN 485-2:2016/prA1 4020

477 ME 171 prEN ISO 2085 4020

478 ME 171 prEN ISO 2376 4020

479 ME 171 prEN ISO 3211 4020

480 ME 171 prEN ISO 6581 4020

481 ME 171 prEN ISO 8993 4020

482 ME 171 prEN ISO 8994 4020

483 ME 171 prEN 14726 4020

Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO/DIS 10426-4:2018)

Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO/FDIS 10855-3:2018)

Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO/FDIS 10855-1:2018)

Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO/FDIS 10855-2:2018)

Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

Petroleum and natural gas industry - Pipeline transportation systems -Pipeline integrity management specification - Part 2: Full-life cycle integritymanagement for offshore pipeline (ISO/DIS 19345-2:2017)

Petroleum and natural gas industries - General requirements for offshore structures (ISO/DIS 19900:2018)

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2017)

Petroleum and natural gas industries - Floating offshore structures - Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO/DIS 19904-1:2017)

Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties

Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO/DIS 2085:2017)

Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO/DIS 2376:2017)

Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO/DIS 3211:2017)

Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO/DIS 6581:2017)

Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO/DIS 8993:2017)

Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO/DIS 8994:2017)

Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry

484 ME 175 prEN 61340-6-1:2017 4020

485 ME 193 prEN 61188-6-4:2018 4020

486 ME 193 prEN 61189-2-630:2017 4020

487 ME 193 prEN 61191-1:2018 4020

488 ME 201 prEN 16480 4020

489 ME 201 prEN 17038-3 4020

490 ME 201 prEN ISO 20361 4020

491 ME 202 prEN 598 4020

492 ME 202 prEN ISO 6149-1 4020

493 ME 202 prEN 10253-2 4020

494 ME 202 prEN 10253-4 4020

495 ME 202 prEN 15655-1 4020

496 ME 218 prEN 1009-3 4020

497 ME 218 prEN 1009-1 4020

498 ME 218 prEN 1009-5 4020

499 ME 218 prEN 1009-2 4020

500 ME 218 prEN 1009-4 4020

501 ME 218 FprEN 15597-1 5020

Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities

Printed boards and printed board assemblies - Design and use - Part 6-4: Generic requirements for dimensional drawings of SMD from viewpoint of land-pattern design

Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test methods for base materials for rigid printed boards - Moisture Absorption after pressure vessel conditioning

Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies

Pumps - Rotodynamic Pumps - Minimum required efficiency of water pumps and methods of qualification and verification

Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of ener-gy efficiency index (EEI) of booster sets

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO/DIS 20361:2018)

Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO/DIS 6149-1:2018)

Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements

Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings

Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery

Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for partly completed machinery and processing plants

Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery

Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment

Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery

Winter maintenance equipment - Spreading and spraying machines - Part 1: General requirements and definitions

502 ME 218 FprEN 15597-2 5020

503 ME 221 prEN ISO 7263-1 4020

504 ME 221 prEN ISO 7263-2 4020

505 ME 221 prEN ISO 12625-1 4020

506 ME 225 prEN 416 4020

507 ME 225 prEN 419 4020

508 ME 225 prEN 12953-5 4020

509 ME 225 prEN 13203-2 4020

510 ME 225 FprEN 13203-6 5020

511 ME 225 FprEN 13203-5 5020

512 ME 225 prEN 17175 4020

513 ME 230 FprEN ISO 11979-7 5020

514 ME 230 FprEN ISO 11979-10 5020

515 ME 230 prEN ISO 11979-1 4020

516 ME 231 EN 1440:2016/prA1:2017 4020

517 ME 231 FprEN 12542 5020

518 ME 231 FprEN 12807 5020

519 ME 231 prEN 12817 4020

520 ME 231 prEN 12819 4020

521 ME 231 prEN 13175 4020

522 ME 231 EN 14071:2015/prA1 4020

523 ME 231 prEN ISO 14245 4020

Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test

Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO/DIS 7263-1:2017)

Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO/DIS 7263-2:2017)

Tissue paper and tissue products - Part 1: Vocabulary (ISO/DIS 12625-1:2017)

Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency

Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency

Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler

Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption

Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps

Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas fired appliances combined with electrical heat pump

Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency

Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO/FDIS 11979-7:2017)

Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO/FDIS 11979-10:2017)

Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO/DIS 11979-1:2018)

LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection

LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture

LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction

LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m3

LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m3

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings

LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment

Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO/DIS 14245:2018)

524 ME 231 FprCEN/TR 14473 5020

525 ME 231 prEN 15202 4020

526 ME 231 prEN ISO 15995 4020

527 ME 231 prEN 16652-2 4020

528 ME 238 FprEN 50594 5020

529 ME 238 FprEN 50640 5020

530 ME 238 CLC/FprTR 50674 5020

531 ME 238 EN 60675:1995/prA2:2017 4020

532 ME 238 prEN 60704-3:2018 4020

533 ME 238 EN 60704-2-14:2013/prA1:2018 4020

534 ME 238 prEN 60704-3:2018/prAA:2018 4020

535 ME 238 EN 60705:2015/FprA2:2018 5020

536 ME 238 prEN 60879:2017 4020

537 ME 238 prEN 62885-6:2017 4020

538 ME 239 prEN 50679 4020

539 ME 239 EN 60335-2-30:2009/prAC:2017 4020

540 ME 239 FprEN 60335-2-97:2017 5020

541 ME 239 FprEN 60335-2-114:2018 5020

542 ME 239 FprEN 60335-2-86:2018 5020

543 ME 264 prEN 62961:2017 4020

544 ME 270 prEN 12726 4020

545 ME 270 FprEN 13317 5020

Transportable gas cylinders - Porous materials for acetylene cylinders

LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections

Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO/DIS 15995:2018)

LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training

Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use

Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended for commercial use

Guidelines for the verification of household appliances under energy labelling and eco design

Household electric direct-acting room heaters - Methods for measuring performance

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

Household microwave ovens - Methods for measuring performance

Comfort fans and regulators for household and similar purposes - Methods for measuring performance

Surface cleaning appliances - Part 6: Wet hard floor cleaning appliances for household or similar use - Methods for measuring the performance

Household and similar electrical appliances with a radio communication interface and/or a radio determination interface - Safety

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment

Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for selfbalancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method

Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules

Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly

546 ME 270 prEN 14025 4020

547 ME 270 prEN 14564 Tanks for the transport of dangerous goods - Terminology 4020

548 ME 270 FprEN 14596 5020

549 ME 270 FprEN 17110 5020

550 ME 270 prEN 17177 4020

551 ME 298 prEN 1656 4020

552 ME 298 FprEN 13704 5020

553 ME 298 EN 16437:2014/prA1 4020

554 ME 305 prEN 30-1-1 4020

555 ME 305 prEN 13611 4020

556 ME 311 5020

557 ME 320 prEN 589 Automotive fuels - LPG - Requirements and test methods 4020

558 ME 320 prEN ISO 3104 4020

559 ME 320 prEN ISO 3405 4020

560 ME 320 EN 14214:2012+A1:2014/prA2 4020

561 ME 320 CEN/TR 15993:2018 5020

562 ME 320 prEN 17178 4020

563 ME 320 prEN 17181 4020

564 ME 324 prEN ISO 10581 4020

565 ME 324 prEN 14215 4020

Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction

Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve

Glass packaging - Crown cap - 26 mm intermediate depth crown cap

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)

Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)

Domestic cooking appliances burning gas - Part 1-1: Safety - General

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements

FprEN 61643-31:2017/FprAA:2017

Low-voltage surge protective devices - Part 31: Surge protective devices connected to the d.c. side of photovoltaic installations - Requirements and test methods

Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2017)

Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure (ISO/DIS 3405:2017)

Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods

Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination

Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence

Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production

Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO/DIS 10581:2018)

Textile floor coverings - Classification of machine-made rugs and runners

566 ME 333 prEN 50436-4 4020

567 ME 336 prEN 1047-1 4020

568 ME 336 prEN 1047-2 4020

569 ME 336 prEN 15659 4020

570 ME 338 prEN ISO 150 4020

571 ME 338 prEN 927-10 4020

572 ME 338 FprEN 927-6 5020

573 ME 338 prEN ISO 3681 4020

574 ME 338 prEN ISO 8504-3 4020

575 ME 338 prEN ISO 11126-7 4020

576 ME 338 FprEN ISO 12944-5 5020

577 ME 338 prEN ISO 18314-3 4020

578 ME 338 prEN ISO 18314-1 4020

579 ME 338 prEN ISO 18314-2 4020

580 ME 338 prEN ISO 18473-1 4020

581 ME 357 FprCEN/TR 17238 5020

582 ME 373 prEN ISO 20700 4020

583 ME 388 CEN/TR 17014-101:2018 5020

584 ME 388 CEN/TR 17015-101:2018 5020

585 ME 388 FprCEN/TR 17016-101:2018 5020

586 ME 390 prEN ISO/ASTM 52911-1 4020

Alcohol interlocks - Test methods and performance requirements - Part 4: Connectors for the electrical connection between the alcohol interlock and the vehicle

Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts

Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container

Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units

Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO/DIS 150:2018)

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO/DIS 3681:2018)

Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO/DIS 8504-3:2017)

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO/DIS 11126-7:2017)

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO/FDIS 12944-5:2017)

Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)

Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)

Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power (ISO 18314-2:2015)

Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application (ISO 18473-1:2015)

Proposed limit values for contaminants in biomethane based on health assessment criteria

Guidelines for management consultancy services (ISO 20700:2017)

Electronic public procurement - Business interoperability interfaces (BII), e-Tendering - Part 101: Overview

Electronic public procurement - Business interoperability interfaces (BII), e-Catalogue - Part 101: Overview

Electronic public procurement - Business interoperability interfaces (BII), e-Ordering - Part 101: Overview

Additive manufacturing - Technical Design Guideline for Powder Bed Fusion - Part 1: Laser-based Powder Bed Fusion of metals (ISO/ASTM DIS 52911-1:2017)

587 ME 390 prEN ISO/ASTM 52911-2 4020

588 MEN 173 FprEN 60375:2018 Conventions concerning electric circuits 5020589 MEN 359 prEN ISO 19112 4020

590 MEN 359 EN ISO 19115-1:2014/A1:2018 5020

591 MEN 359 FprEN ISO 19115-2 5020

592 MM 53 FprEN 689 5020

593 MM 53 FprCEN/TS 17198 5020

594 MM 53 prEN 17199-4 4020

595 MM 53 prEN 17199-1 4020

596 MM 53 prEN 17199-3 4020

597 MM 53 prEN 17199-2 4020

598 MM 53 prEN 17199-5 4020

599 MM 323 prEN ISO 14024 4020

600 MM 323 prEN ISO 14064-3 4020

601 MM 323 prEN ISO 14067 4020

602 MM 360 prEN 1501-2 4020

603 MM 360 prEN 1501-3 4020

604 MM 360 prEN 1501-5 4020

605 MM 360 prEN 1501-1 4020

606 MM 360 FprEN ISO 11260 5020

Additive manufacturing - Technical Design Guideline for Powder Bed Fusion - Part 2: Laser-based Powder Bed Fusion of Polymers (ISO/ASTM DIS 52911-2:2017)

Geographic information - Spatial referencing by geographic identifiers (ISO/DIS 19112:2018)

Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018)

Geographic information - Metadata - Part 2: Extensions for acquisition and processing (ISO/FDIS 19115-2:2017)

Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values

Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance

Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 4: Small rotating drum method

Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 1: Requirements and choice of test methods

Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 3: Continuous drop method

Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 2: Rotating drum method

Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 5: Vortex shaker method

Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO/FDIS 14024:2017)

Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO/DIS 14064-3:2017)

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO/DIS 14067:2017)

Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO/FDIS 11260:2017)

607 MM 360 FprEN ISO 14254 5020

608 MM 360 prEN 14702-3 4020

609 MM 360 prEN 16167 4020

610 MM 360 prEN 16181 4020

611 MM 360 prEN 16190 4020

612 MM 360 FprCEN/TS 16675 5020

613 MM 360 prEN 17183 Evaluation of sludge density 4020614 MM 360 prEN ISO 23161 4020

615 MM 360 prEN ISO 23470 4020

616 MM 360 prEN ISO 23753-2 4020

617 MM 360 prEN ISO 23753-1 4020

618 MMJS 54 prEN ISO 10551 4020

619 MMJS 137 prEN 1127-1 4020

620 MMJS 137 FprEN 17077 Determination of burning behaviour of dust layers 5020621 MMJS 137 FprEN 50291-1 5020

622 MMJS 137 prEN 60079-31:2018 4020

623 MMJS 148 EN 12042:2014/prA1:2017 4020

624 MMJS 223 prEN ISO 13851 4020

625 MMJS 223 prEN ISO 13857 4020

626 MMJS 223 FprEN 16985 5020

627 MMJS 223 EN ISO 19353:2016/prA1 4020

628 MMJS 223 prEN ISO 20607 4020

Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO/FDIS 14254:2017)

Characterization and management of sludge - Determination of settling properties - Part 3: Determination of zone settling velocity (ZSV)

Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)

Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)

Waste - Test methods for the determination of the monolithic status of waste to be landfilled

Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO/DIS 23161:2017)

Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO/DIS 23470:2017)

Soil quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO/DIS 23753-2)

Soil quality - Determination of dehydrogenase activity in soils - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO/DIS 23753-1:2017)

Ergonomics of the physical environment - Subjective judgement scales for assessing physical environments (ISO/DIS 10551:2017)

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

Food processing machinery - Automatic dough dividers - Safety and hygiene requirements

Safety of machinery - Two-hand control devices - Functional aspects and design principles (ISO/DIS 13851:2017)

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO/DIS 13857:2017)

Spray booths for organic coating material - Safety requirements

Safety of machinery - Fire prevention and fire protection - Amendment 1 (ISO 19353:2016/DAmd 1:2017)

Safety of machinery - Instruction handbook - General drafting principles (ISO/DIS 20607:2018)

629 MMJS 227 EN 144-1:2018 5020

630 MMJS 227 EN 144-2:2018 5020

631 MMJS 227 FprEN 358 5020

632 MMJS 227 EN ISO 374-1:2016/prA1 4020

633 MMJS 227 EN 388:2016/prA1:2018 Protective gloves against mechanical risks 4020634 MMJS 227 EN 1073-1:2016/FprA1:2018 5020

635 MMJS 227 FprEN 1149-5 5020

636 MMJS 227 prEN ISO 12402-3 4020

637 MMJS 227 prEN ISO 12402-8 4020

638 MMJS 227 prEN ISO 12402-9 4020

639 MMJS 227 prEN ISO 12402-2 4020

640 MMJS 227 prEN ISO 12402-6 4020

641 MMJS 227 prEN ISO 12402-5 4020

642 MMJS 227 prEN ISO 12402-4 4020

643 MMJS 227 prEN ISO 12402-7 4020

644 MMJS 227 prEN ISO 12402-10 4020

645 MMJS 227 prEN 12941 4020

646 MMJS 227 prEN 12942 4020

647 MMJS 227 FprEN 14593-1 5020

648 MMJS 227 FprEN 14594 5020

649 MMJS 227 prEN ISO 21420 4020

Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections

Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections

Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/DAmd 1:2017)

Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract

Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements

Personal flotation devices - Part 3: Lifejackets, performance level 150 Safety requirements (ISO/DIS 12402-3:2017)

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (ISO/DIS 12402-8:2017)

Personal flotation devices - Part 9: Test methods (ISO/DIS 12402-9:2017)

Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements (ISO/DIS 12402-2:2017)

Personal flotation devices - Part 6: Special application lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO/DIS 12402-6:2017)

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO/DIS 12402-5:2017)

Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requirements (ISO/DIS 12402-4:2017)

Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO/DIS 12402-7:2017)

Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO/DIS 12402-10:2017)

Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking

Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking

Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking

Protective gloves - General requirements and test methods (ISO/DIS 21420:2018)

650 MMJS 255 5020

651 MMJS 255 prEN 62841-3-7:2018 4020

652 MMJS 274 FprEN ISO 4869-2 5020

653 MMJS 274 FprEN ISO 4869-1 5020

654 MMJS 274 prEN 13819-1 Hearing protectors - Testing - Part 1: Physical test methods 4020

655 MMJS 274 prEN 13819-2 Hearing protectors - Testing - Part 2: Acoustic test methods 4020

656 MS 22 EN 60601-2-4:2011/FprA1:2017 5020

657 MS 22 FprEN 60601-2-16:2018 5020

658 MS 22 FprEN 60601-2-39:2018 5020

659 MS 22 FprEN 60601-2-76:2018 5020

660 MS 22 prEN 61223-3-5:2017 4020

661 MS 22 prEN 62985:2017 4020

662 MS 22 FprEN 80601-2-30:2017 5020

663 MS 22 FprEN 80601-2-49:2017 5020

664 MS 22 prEN 80601-2-77:2017 4020

665 MS 22 prEN 80601-2-78:2017 4020

666 MS 279 prEN 50413 4020

667 MS 279 prEN 50499:2017 4020

668 MS 377 FprEN ISO 5832-2 5020

669 MS 377 FprEN ISO 7488 5020

FprEN 62841-2-21:2017/FprAA:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws

Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO/FDIS 4869-2:2018)

Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation (ISO/FDIS 4869-1:2018)

Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment

Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

Medical Electrical Equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment

Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment

Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography

Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers

Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment

Medical Electrical Equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment

Medical Electrical Equipment - Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)

Procedure for the assessment of the exposure of workers to electromagnetic fields

Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO/FDIS 5832-2:2017)

Dentistry - Mixing machines for dental amalgam (ISO/FDIS 7488:2018)

670 MS 377 prEN ISO 7886-4 4020

671 MS 377 EN ISO 9687:2015/FprA1 5020

672 MS 377 EN ISO 10079-1:2015/FprA1 5020

673 MS 377 FprEN ISO 10637 5020

674 MS 377 EN ISO 11070:2014/prA1 4020

675 MS 377 prEN ISO 13017 Dentistry - Magnetic attachments (ISO/DIS 13017:2018) 4020676 MS 377 EN 13060:2014/prA1:2017 Small steam sterilizers 4020677 MS 377 FprEN ISO 14607 5020

678 MS 377 prEN ISO 16054 4020

679 MS 377 FprCEN/TS 16826-3 5020

680 MS 377 prEN 17180 4020

681 MS 377 CEN/TR 17223:2018 5020

682 MS 377 FprEN ISO 18618 5020

683 MS 377 prEN ISO 20186-3 4020

684 MS 377 FprEN ISO 20608 5020

685 MS 377 FprEN ISO 28319 5020

686 MS 377 EN ISO 80601-2-13:2012/FprA2 5020

687 MT 4 prEN 50367:2017 4020

688 MT 4 CLC/FprTR 50542-1 5020

689 MT 4 prEN 50591 4020

690 MT 4 FprEN 61375-2-6:2018 5020

691 MT 72 FprEN 2369 5020

692 MT 72 FprEN 2564 5020

693 MT 72 FprEN 2944 5020

Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO/DIS 7886-4:2017)

Dentistry - Graphical symbols for dental equipment - Amendment 1 (ISO 9687:2015/FDAM 1:2017)

Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/FDAM 1:2018)

Dentistry - Central suction source equipment (ISO/FDIS 10637:2017)

Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/DAM 1:2017)

Non-active surgical implants - Mammary implants - Particular requirements (ISO/FDIS 14607:2017)

Implants for surgery - Minimum data sets for surgical implants (ISO/DIS 16054:2017)

Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 3: Isolated DNA

Sterilizers for medical purposes - Low temperature vaporized hydrogen peroxide sterilizers - Requirements and testing

Guidance on the relationship between EN ISO 13485: 2016 (Medical devices - Quality management systems - Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation

Dentistry - Interoperability of CAD/CAM systems (ISO/FDIS 18618:2018)

Molecular in-vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Cellular RNA - Part 3: Isolated circulating cell free DNA from plasma (ISO/DIS 20186-3:2018)

Dentistry - Mixing machines for dental amalgam (ISO/FDIS 20608:2018)

Dentistry - Laser welding and filler materials (ISO/FDIS 28319:2017)

Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 2 (ISO 80601-2-13:2011/FDAM 2:2017)

Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access)

Railway applications - Driver's cab train display controller (TDC) - Part 1: General architecture

Specification and verification of energy consumption for railway rolling stock

Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication

Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm ? D ? 8 mm - Dimensions

Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents

Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004

694 MT 72 FprEN 4730 5020

695 MT 72 FprEN 6109 5020

696 MT 72 FprEN 12312-8 5020

697 MT 143 FprEN 61162-460:2018 5020

698 MT 146 FprEN 13231-5 5020

699 MT 146 prEN 14033-4 4020

700 MT 146 EN 14067-4:2013/prA1:2017 4020

701 MT 146 FprEN 14067-6 5020

702 MT 146 prEN 15152 Railway applications - Windscreens for trains 4020703 MT 146 FprEN 16727-1 5020

704 MT 146 FprEN 16727-2-1 5020

705 MT 146 FprEN 16989 5020

706 MT 146 FprEN 17065 5020

707 MT 199 prEN ISO 6185-1 4020

708 MT 199 prEN ISO 6185-2 4020

709 MT 199 prEN ISO 6185-3 4020

710 MT 199 prEN ISO 6185-4 4020

711 MT 199 prEN ISO 7840 Small craft - Fire-resistant fuel hoses (ISO 7840:2013) 4020712 MT 199 prEN ISO 8469 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) 4020

713 MT 199 prEN ISO 8666 Small craft - Principal data (ISO 8666:2016) 4020714 MT 199 prEN ISO 8849 4020

715 MT 199 prEN ISO 9093-2 4020

716 MT 199 prEN ISO 9093-1 4020

Aerospace series - Anthropometric dimensioning of aircraft seats

Aerospace series - Static seal elements elastomer, moulded, phosphate ester resistant - Technical specification

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security

Railway applications - Track - Acceptance of works - Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices

Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail

Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track

Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue

Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat

Railway applications - Braking - Passenger coach test procedure

Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001)

Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001)

Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)

Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)

Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)

Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)

Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

717 MT 199 prEN ISO 11192 Small craft - Graphical symbols (ISO 11192:2005) 4020718 MT 199 prEN ISO 11547 Small craft - Start-in-gear protection (ISO 11547:1994) 4020719 MT 199 prEN ISO 11812 4020

720 MT 199 prEN ISO 12215-6 4020

721 MT 199 prEN ISO 12215-3 4020

722 MT 199 prEN ISO 12215-2 4020

723 MT 199 prEN ISO 12215-8 4020

724 MT 199 prEN ISO 12215-9 4020

725 MT 199 prEN ISO 12215-7 4020

726 MT 199 prEN ISO 12215-4 4020

727 MT 199 prEN ISO 12215-5 4020

728 MT 199 prEN ISO 12215-1 4020

729 MT 199 prEN ISO 12216 4020

730 MT 199 prEN ISO 13297 4020

731 MT 199 prEN ISO 13590 4020

732 MT 199 prEN 14504 4020

733 MT 199 prEN ISO 14509-3 4020

734 MT 199 prEN ISO 14509-1 4020

735 MT 199 prEN ISO 15083 Small craft - Bilge-pumping systems (ISO 15083:2003) 4020736 MT 199 prEN ISO 15084 4020

737 MT 199 prEN 15869-1 4020

738 MT 199 prEN 15869-3 4020

739 MT 199 prEN 15869-2 4020

740 MT 199 FprEN ISO 16147 5020

741 MT 199 prEN ISO 16180 4020

Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)

Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)

Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)

Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)

Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)

Small craft - Hull construction and scantlings - Part 7: Scantlings determination of multihulls (ISO/DIS 12215-7 :2017)

Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)

Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002)

Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)

Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)

Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, tests

Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)

Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)

Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 1: General requirements

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements

Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO/FDIS 16147:2018)

Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)

742 MT 199 prEN ISO 21487 4020

743 MT 199 prEN ISO 25197 4020

744 MT 303 FprEN 2591-228 5020

745 MT 303 FprEN 3646-006 5020

746 MT 303 FprEN 3660-001 5020

747 MT 303 FprEN 3745-411 5020

748 MT 303 FprEN 3745-506 5020

749 MT 303 FprEN 4533-001 5020

750 MT 303 FprEN 4611-005 5020

751 MT 303 FprEN 4611-006 5020

752 MT 303 FprEN 4611-007 5020

753 MT 303 FprEN 4641-001 5020

754 MT 303 FprEN 4839-001 5020

755 MT 303 FprEN 4839-003 5020

756 MT 303 prEN 62239-1:2018 4020

757 MT 345 FprCEN/TS 17182 5020

758 MT 345 FprCEN/TS 17184 5020

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)

Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012)

Aerospace series - Elements of electrical and optical connection - Test methods - Part 228: Ferrule withdrawal force

Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance

Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification

Aerospace series - Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification

Aerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard

Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan

Intelligent transport systems - eSafety - eCall via an ITS-station

Intelligent transport systems - eSafety - eCall High level application Protocols (HLAP) using IMS packet switched networks

TC

CEN/TC 302

CEN/TC 302

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 275

CEN/TC 327

CEN/TC 327

CEN/TC 275

CEN/TC 327

CEN/TC 302

CEN/TC 307

CEN/TC 338

CEN/TC 338

CEN/TC 307

CEN/TC 307

CEN/TC 345

CEN/TC 345

CEN/TC 345CEN/TC 72

CEN/TC 191

CEN/TC 192

CEN/TC 70

CEN/TC 391


CEN/TC 230

CEN/TC 230

CEN/TC 230

CEN/TC 164

CEN/TC 230

CEN/TC 230

CEN/TC 164

CEN/TC 230

CEN/TC 230

CEN/TC 230

CEN/TC 230

CEN/TC 346

CEN/TC 346

CLC/TC 86BXA

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86A

CLC/TC 86BXA

CLC/SR 86C

CLC/SR 86C

CLC/SR 86C

CLC/SR 86C

CEN/TC 224

CEN/TC 224

CEN/TC 224

CEN/TC 224

CLC/TC 215

CLC/TC 215

CLC/TC 215

CLC/TC 215

CLC/TC 215

CLC/TC 215

CEN/TC 251

CEN/TC 251

CEN/TC 251

CEN/TC 251

CLC/TC 100XCLC/TC 108X

CLC/TC 100X

CLC/TC 100X

CLC/TC 100X

CEN/TC 331

CEN/TC 241

CEN/TC 254

CEN/TC 88

CEN/TC 88

CEN/TC 88

CEN/TC 254

CEN/TC 254

CEN/TC 351

CEN/TC 254

CEN/TC 88

CEN/TC 88

CEN/TC 254

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 351

CEN/TC 67

CEN/TC 163

CEN/TC 246

CEN/TC 129

CEN/TC 129

CEN/TC 129

CEN/TC 129

CEN/TC 129

CEN/TC 129

CEN/TC 129


CEN/TC 129

CEN/TC 129

CEN/TC 129

CLC/TC 64

CLC/TC 64

CLC/TC 64

CLC/TC 64

CEN/TC 226

CEN/TC 226


CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 227

CEN/TC 226

CEN/TC 336

CEN/TC 336

CEN/TC 227

CEN/TC 336

CEN/TC 227

CEN/TC 227

CEN/TC 169

CEN/TC 126

CEN/TC 126CEN/TC 126CEN/TC 89

CEN/TC 107

CEN/TC 107

CEN/TC 107

CEN/TC 107

CEN/TC 107

CEN/TC 156

CEN/TC 195

CEN/TC 195

CEN/TC 195

CEN/TC 195

CEN/TC 33

CEN/TC 33CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 33

CEN/TC 154

CEN/TC 154

CEN/TC 104

CEN/TC 104

CEN/TC 124

CEN/TC 442

CEN/TC 442

CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167

CEN/TC 167



CLC/TC 81X

CEN/TC 125

CEN/TC 125


CEN/TC 341

CEN/TC 189

CEN/TC 189

CEN/TC 348


CEN/TC 166

CLC/TC 2

CLC/TC 14

CLC/SR 112

CLC/SR 112

CLC/SR 112

CLC/TC 17AC

CLC/TC 17AC

CLC/TC 17AC

CLC/TC 121A

CLC/TC 121A

CLC/TC 213

CLC/SR 23G

CLC/SR 23G

CLC/SR 23G

CLC/SR 23G

CLC/SR 23G

CLC/SR 23G

CLC/TC 23E

CLC/TC 23H

CLC/TC 23H

CLC/SR 23K

CLC/TC 23E

CLC/SR 32B

CLC/TC 36ACLC/SR 47

CLC/SR 47A

CLC/SR 47

CLC/SR 47

CLC/SR 47A

CLC/SR 47A

CLC/SR 47

CLC/SR 49

CLC/SR 49

CLC/TC 111X

CLC/SR 51

CLC/SR 51

CLC/SR 51

CLC/SR 51

CLC/SR 51

CLC/TC 55

CLC/TC 55

CLC/TC 44X

CLC/TC 65X

CLC/TC 65X

CLC/TC 44X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/TC 65X

CLC/SR 66

CLC/SR 66

CLC/SR 66

CLC/SR 66

CLC/SR 29

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 79

CLC/TC 210

CLC/TC 210

CLC/TC 210

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 82

CLC/TC 22X

CLC/TC 22X

CLC/TC 22X

CEN/TC 240

CEN/TC 240

CEN/TC 240

CEN/TC 240

CEN/TC 240

CEN/TC 121

CEN/TC 121

CEN/TC 138

ECISS/TC 102

ECISS/TC 100

ECISS/TC 102

ECISS/TC 101

ECISS/TC 101

ECISS/TC 109

ECISS/TC 103

ECISS/TC 105ECISS/TC 111ECISS/TC 104

CEN/SS M11

CEN/SS M11

CEN/TC 190CEN/SS F20

CEN/TC 290

CEN/TC 290

CEN/TC 145

CEN/TC 185

CEN/TC 185

CEN/TC 145

CEN/TC 136

CEN/TC 136

CEN/TC 433

CEN/TC 433

CEN/TC 136


CEN/TC 301

CEN/TC 301

CEN/TC 301

CEN/TC 10

CEN/TC 10

CEN/TC 10

CEN/TC 150

CEN/TC 150

CEN/TC 150

CEN/TC 10

CEN/TC 147


CEN/TC 150

CEN/TC 150

CEN/TC 150

CEN/TC 93CEN/TC 93

CEN/TC 69

CEN/TC 69

CEN/TC 289

CEN/TC 289

CEN/TC 309

CEN/TC 289

CEN/TC 248

CEN/TC 248


CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 248

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 260

CEN/TC 249

CEN/TC 249

CEN/TC 249

CEN/TC 155

CEN/TC 218

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 249

CEN/TC 249

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 366

CEN/TC 366

CEN/TC 366


CEN/TC 249

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 155

CEN/TC 366

CEN/TC 366

CEN/TC 249

CEN/TC 155

CEN/TC 155

CEN/TC 249

CEN/TC 249

CEN/TC 176

CEN/TC 176

CEN/TC 176CEN/TC 176CEN/TC 176CEN/TC 237

CEN/TC 294

CEN/TC 294

CEN/TC 294

CEN/TC 294



CEN/TC 38

CEN/TC 207



CEN/TC 52CEN/TC 252

CEN/TC 252

CEN/TC 252

CEN/TC 252

CEN/TC 252

CEN/TC 252

CEN/TC 52

CEN/TC 52


CLC/TC 95X

CLC/SR 94

CLC/TC 26ACLC/TC 26A

CLC/TC 26ACLC/TC 26ACLC/TC 26ACLC/TC 26A

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34CLC/TC 34

CLC/TC 34CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/TC 34

CLC/SR 40

CLC/TC 40XA

CLC/TC 40XA

CLC/TC 40XA

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/TC 57

CLC/SR 56CLC/SR 48D

CLC/SR 48B

CLC/SR 48B

CLC/SR 48B

CLC/SR 48B

CLC/SR 48B

CLC/SR 48B

CLC/SR 48B

CEN/TC 113

CEN/TC 268CEN/TC 54CEN/TC 54CEN/TC 54

CEN/TC 214

CEN/TC 262

CEN/TC 262

CEN/TC 262

CEN/TC 262

CLC/TC 46X

CLC/SR 105

CLC/SR 105

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/TC 21X

CLC/SR 120

CLC/SR 28

CLC/TC 85X

CLC/TC 8X

CLC/TC 8X

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 265


CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 12

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

CEN/TC 132

CLC/SR 101

CLC/SR 91

CLC/SR 91

CLC/SR 91

CEN/TC 197

CEN/TC 197

CEN/TC 197

CEN/TC 203

ECISS/TC 110

ECISS/TC 110

ECISS/TC 110

CEN/TC 203

CEN/TC 151

CEN/TC 151

CEN/TC 151

CEN/TC 151

CEN/TC 151

CEN/TC 337

CEN/TC 337

CEN/TC 172

CEN/TC 172

CEN/TC 172

CEN/TC 180

CEN/TC 180

CEN/TC 269

CEN/TC 109

CEN/TC 109

CEN/TC 109

CEN/TC 180

CEN/TC 170

CEN/TC 170

CEN/TC 170

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 286

CEN/TC 23

CEN/TC 286

CEN/TC 286

CEN/TC 286

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 59X

CLC/TC 61

CLC/TC 61

CLC/TC 61

CLC/TC 61

CLC/TC 61

CLC/SR 10

CEN/TC 261

CEN/TC 296

CEN/TC 296

CEN/TC 296

CEN/TC 296

CEN/TC 296

CEN/TC 261

CEN/TC 216

CEN/TC 216

CEN/TC 216

CEN/TC 49

CEN/TC 58

CLC/TC 37A

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 19

CEN/TC 134

CEN/TC 134

CLC/BTTF 116-2

CEN/TC 263

CEN/TC 263

CEN/TC 263

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 139

CEN/TC 298

CEN/TC 298

CEN/TC 298

CEN/TC 298

CEN/TC 408

CEN/TC 381

CEN/TC 440

CEN/TC 440

CEN/TC 440

CEN/TC 438

CEN/TC 438

CLC/SR 25CEN/TC 287

CEN/TC 287

CEN/TC 287

CEN/TC 137

CEN/TC 264

CEN/TC 137

CEN/TC 137

CEN/TC 137

CEN/TC 137

CEN/TC 137

CEN/SS S26

CEN/SS S26

CEN/SS S26

CEN/TC 183

CEN/TC 183

CEN/TC 183

CEN/TC 183

CEN/TC 444

CEN/TC 444

CEN/TC 308

CEN/TC 444

CEN/TC 444

CEN/TC 444

CEN/TC 444


CEN/TC 444

CEN/TC 444

CEN/TC 444

CEN/TC 122

CEN/TC 305

CEN/TC 305CLC/TC 216

CLC/TC 31

CEN/TC 153

CEN/TC 114

CEN/TC 114

CEN/TC 271

CEN/TC 114

CEN/TC 114

CEN/TC 79

CEN/TC 79

CEN/TC 160

CEN/TC 162


CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 162

CEN/TC 79

CEN/TC 79

CEN/TC 79

CEN/TC 79

CEN/TC 162

CLC/TC 116

CLC/TC 116

CEN/TC 211

CEN/TC 211

CEN/TC 159

CEN/TC 159

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 62

CLC/TC 106X

CLC/TC 106X

CEN/TC 55

CEN/TC 55

CEN/TC 205

CEN/TC 55

CEN/TC 215

CEN/TC 55

CEN/TC 205


CEN/TC 285

CEN/TC 140

CEN/TC 102

CEN/CLC/JTC 3

CEN/TC 55

CEN/TC 140

CEN/TC 55

CEN/TC 55

CEN/TC 215

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

CLC/TC 9X

ASD-STAN/D 4/WG 1

ASD-STAN/D 4/WG 8

ASD-STAN/D 3/WG 2

ASD-STAN/D 1/WG 7

ASD-STAN/D 3

CEN/TC 274

CLC/SR 80

CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/TC 256


CEN/TC 256

CEN/TC 256

CEN/TC 256

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01CEN/SS T01


CEN/SS T01

CEN/SS T01

CEN/SS T01CEN/SS T01CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/TC 15

CEN/SS T01

CEN/SS T01


CEN/TC 15

CEN/TC 15

CEN/TC 15

CEN/SS T01

CEN/SS T01

CEN/SS T01

CEN/SS T01

ASD-STAN/D 2

ASD-STAN/D 2/WG 3

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2

ASD-STAN/D 2/WG 5

ASD-STAN/D 2/WG 5

CLC/SR 107

CEN/TC 278

CEN/TC 278

ASD-STAN/D 2/WG 10

ASD-STAN/D 2/WG 10

Proiectele de standarde internaţionale ISO-IEC cu faze de vot în 2018Nota: Lista contine proiectele elaborate în comitetele tehnice de standardizare internationale în care Romania este membru participant

Minister CT Indicativ EN

1 MADR 97 ISO/DIS 21160




5 MAI 376 ISO/DIS 22381

6 MAI 376 ISO/DIS 22382

7 MCSI 204 ISO/IEC 7816-4:2013/DAmd 18 MCSI 204 ISO/IEC 7816-4:2013/DAmd 29 MCSI 204 ISO/IEC 10373-6:2016/Amd 3

10 MCSI 204 ISO/IEC FDIS 14443-1

11 MCSI 204 ISO/IEC DIS 15693-1



14 MCSI 204 ISO/IEC DIS 24787





19 MCSI 208 ISO/IEC 19896-1:2018




23 MCSI 208 ISO/IEC 24760-1:2011/DAmd 1.2


Nr Crt




28 MCSI 208 ISO/IEC 27000:2018


30 MCSI 208 ISO/IEC 29110-4-1

31 MCSI 208 ISO/IEC DIS 29110-4-3

32 MCSI 208 ISO/IEC/IEEE DIS 29148

33 MCSI 208 ISO/IEC/IEEE DIS 4203034 MCSI 208 ISO/IEC DIS 90003






40 MCSI 375 IEC 60268-4 ED641 MCSI 375 IEC TS 62312-1-1 ED2

42 MCSI 375 IEC TS 62312-2 ED2

43 MCSI 375 IEC 62680-1-4 ED1

44 MCSI 375 IEC 62680-1-3 ED3

45 MCSI 375 IEC 63006 ED146 MCSI 375 IEC 63033-2 ED1

47 MDRAPFE 335 ISO/DIS 19650-1.2

48 MDRAPFE 335 ISO/DIS 19650-2.2

49 MDRAPFE 397 ISO/FDIS 37157

50 MDRAPFE 397 ISO/DIS 37158

51 ME 2 ISO 81346-12 ED1

52 ME 2 IEC/IEEE 82079-1 ED2

53 ME 11 IEC 60320-3/AMD1 ED1

54 ME 11 IEC 60320-1/AMD1 ED3

55 ME 11 IEC 60320-2-1 ED3

56 ME 11 IEC 60320-2-3 ED2

57 ME 11 IEC 60320-2-4 ED2

58 ME 11 IEC 60799 ED3

59 ME 11 IEC 60898-3 ED1

60 ME 11 IEC 62955 ED1

61 ME 11 IEC 63052 ED1

62 ME 16 IEC 60709 ED3

63 ME 16 IEC 60744 ED2

64 ME 16 IEC 60772 ED2

65 ME 16 IEC 61225 ED3

66 ME 16 IEC 61500 ED3

67 ME 16 IEC 62244 ED2

68 ME 16 IEC/IEEE 62582-6 ED1

69 ME 16 IEC 62765-2 ED1

70 ME 16 IEC 62988 ED1

71 ME 16 IEC 63047 ED1

72 ME 23 ISO/DIS 18646-2

73 ME 23 IEC 60746-4 ED2

74 ME 23 IEC 61131-10 ED175 ME 23 IEC 62714-1 ED2

76 ME 23 IEC 62769-100 ED1

77 ME 23 IEC 62769-115-2 ED1

78 ME 23 IEC 62828-3 ED1

79 ME 23 IEC TR 63176 ED1

80 ME 23 IEC/DIS 80601-2-77

81 ME 23 IEC/DIS 80601-2-78

82 ME 24 IEC 61010-2-051 ED4

83 ME 24 IEC 61010-2-061 ED4

84 ME 24 IEC 61010-2-101 ED3

85 ME 24 IEC 61010-2-081 ED3

86 ME 30 Amd 2 Frag 3 to CISPR 11 Ed. 6

87 ME 30 CISPR 12 ED7


89 ME 30 CISPR 16-1-1/ISH1 ED4


91 ME 30 IEC 61000-2-2 Ed2 A2

92 ME 35 IEC 60904-3 ED4

93 ME 35 IEC 60904-7 ED4

94 ME 35 IEC TS 60904-1-2 ED1

95 ME 35 IEC 62788-1-7 ED1

96 ME 35 IEC 62892 ED197 ME 35 IEC TS 62994 ED1

98 ME 39 ISO 21904-3:2018

99 ME 56 ISO 9004

100 ME 56 ISO/FDIS 21001

101 ME 56 ISO/DIS 30401102 ME 56 ISO/DIS 30414

103 ME 56 ISO 45001

104 ME 59 ISO 12297-2

105 ME 78 ISO 15118-8:2018

106 ME 78 ISO 15118-4

107 ME 78 ISO 15118-5

108 ME 78 ISO/DIS 15118-1

109 ME 78 ISO/FDIS 16845-2

110 ME 78 ISO/DIS 17840-3

111 ME 78 ISO/DIS 17840-2

112 ME 78 ISO/DIS 20078-1

113 ME 78 ISO/DIS 20078-3

114 ME 78 ISO/DIS 20078-2

115 ME 78 ISO/DIS 20078-4

116 ME 78 ISO/DIS 20080

117 ME 109 ISO/DIS 5167-6

118 ME 118 ISO 19474:2018119 ME 131 IEC 61167 ED4120 ME 131 IEC 61347-2-14 ED1

121 ME 131 IEC 62031 Ed. 2122 ME 131 IEC 62386-101/AMD1 ED2

123 ME 131 IEC 62386-102/AMD1 ED2

124 ME 131 IEC 62386-103/AMD1 ED1

125 ME 131 IEC 62386-220 ED1

126 ME 131 IEC 62386-217 ED1

127 ME 131 IEC 62386-218 ED1

128 ME 131 IEC 62386-207 ED2

129 ME 131 IEC 62386-222 ED1

130 ME 131 IEC 62386-216 ED1

131 ME 131 IEC 62504/AMD1 ED1

132 ME 131 IEC 62717/AMD2 ED1

133 ME 144 IEC 31010 ED2134 ME 144 IEC 31010 ED2135 ME 159 IEC 60331-1 ED2

136 ME 159 IEC 60331-3 ED2

137 ME 159 IEC 60331-2 ED2

138 ME 159 IEC 60754-3 ED1

139 ME 159 IEC 61238-1-1 ED1

140 ME 159 IEC 61238-1-2 ED1

141 ME 159 IEC 61238-1-3 ED1

142 ME 164 IEC 62055-41 ED3

143 ME 166 IEC 60051-9 ED5

144 ME 166 IEC 61557-1 ED3

145 ME 166 IEC 61557-2 ED3

146 ME 166 IEC 61557-3 ED3

147 ME 166 IEC 61557-4 ED3

148 ME 166 IEC 61557-5 ED3

149 ME 166 IEC 61557-6 ED3

150 ME 166 IEC 61557-7 ED3

151 ME 169 ISO/DIS 19345-2

152 ME 169 ISO/DIS 19345-1

153 ME 169 ISO/DIS 21809-11

154 ME 230 ISO/DIS 9211-8

155 ME 238 IEC 60675/AMD2 ED2

156 ME 238 IEC 60705/AMD2 ED4

157 ME 238 IEC 60879 ED2

158 ME 333 ISO/DIS 8820-6159 ME 333 ISO/DIS 11452-2

160 ME 333 ISO 19453-1

161 ME 333 ISO 19453-3

162 ME 333 ISO 19453-4

163 ME 333 ISO 19453-5

164 ME 333 ISO/DIS 19642-5

165 ME 333 ISO/DIS 19642-8

166 ME 333 ISO/DIS 19642-1

167 ME 333 ISO/DIS 19642-2168 ME 333 ISO/DIS 19642-3

169 ME 333 ISO/DIS 19642-6

170 ME 333 ISO/DIS 19642-7

171 ME 333 ISO/DIS 19642-10

172 ME 333 ISO/DIS 19642-4

173 ME 333 ISO/DIS 19642-9

174 ME 373 ISO/DIS 20228.2175 ME 382 ISO/DIS 21632

176 MEN 173 IEC 60050-485 ED1

177 MM 53 ISO/DIS 28902-3

178 MMJS 137 IEC 60079-31 ED3

179 MS 22 Amd 1 to IEC 60601-2-4

180 MS 22 IEC TR 60601-4-3 ED2

181 MS 22 IEC 60601-2-76 ED1

182 MS 22 IEC 60601-2-16 ED5

183 MS 22 IEC 60601-2-39 ED3

184 MS 22 IEC 60601-2-43/AMD2 ED2

185 MS 22 IEC 61223-3-5 ED2

186 MS 22 IEC TR 61948-2 ED2

187 MS 22 IEC TR 61948-4 ED2

188 MS 22 IEC 62304 Ed. 2189 MS 22 IEC 62985 ED1

190 MS 22 IEC 80601-2-78 ED1

191 MS 22 IEC 80601-2-77 ED1

192 MS 22 IEC 80601-2-78 ED1

193 MS 22 IEC 80601-2-77 ED1

194 MS 22 IEC 80601-2-49 ED1

195 MS 22 IEC 80601-2-30 ED2

196 MS 22 ISO 80601-2-13/AMD2 ED1

197 MS 377 ISO 7488198 MS 377 ISO/DIS 7886-4

199 MS 377 ISO 9687:2015/Amd 1200 MS 377 ISO 10637201 MS 377 ISO 11070:2014/DAmd 1202 MS 377 ISO 14607

203 MS 377 ISO/DIS 16054204 MS 377 ISO 17327-1:2018

205 MS 377 ISO 19227

206 MS 377 ISO/DIS 19894207 MS 377 ISO/DIS 21802

208 MT 4 IEC 61375-2-6 ED1

209 MT 4 IEC 61991 ED2

210 MT 4 IEC 62236-1 ED3211 MT 4 IEC 62236-2 ED3

212 MT 4 IEC 62236-3-1 ED3

213 MT 4 IEC 62236-3-2 ED3

214 MT 4 IEC 62236-4 ED3

215 MT 4 IEC 62236-5 ED3

216 MT 4 IEC 62848-2 ED1

217 MT 4 IEC 62973-1 ED1

218 MT 4 IEC 62995 ED1219 MT 143 IEC 60092-302-2 ED1

220 MT 143 IEC 61892-1 ED4

221 MT 143 IEC 61892-2 ED3

222 MT 143 IEC 61892-3 ED4

223 MT 143 IEC 61892-4 ED2

224 MT 143 IEC 61892-5 ED4

225 MT 143 IEC 61892-6 ED4

226 MT 143 IEC 61892-7 ED4

227 MT 199 ISO/DIS 11711-1

228 MT 199 ISO/DIS 20661

229 MT 199 ISO/DIS 20662

230 MT 199 ISO/DIS 20663


Proiectele de standarde internaţionale ISO-IEC cu faze de vot în 2018Nota: Lista contine proiectele elaborate în comitetele tehnice de standardizare internationale în care Romania este membru participant

Titlu Faza TC

4020 ISO/TC 126

4020 ISO/TC 126

4020 ISO/TC 126

4020 ISO/TC 34/SC 2

4020 ISO/TC 292

4020 ISO/TC 292

Record handling 4020 ISO/IEC JTC 1/SC 17Waiting time management 4020 ISO/IEC JTC 1/SC 17PICC loading effect 5020 ISO/IEC JTC 1/SC 17

5020 ISO/IEC JTC 1/SC 17




Information technology -- Identification cards -- On-card biometric comparison 4020 ISO/IEC JTC 1/SC 17









Additional terminology and concepts 4020 ISO/IEC JTC 1/SC 27


Cigarettes -- Determination of selected carbonyls in the mainstream smoke of cigarettes -- Method using high performance liquid chromatography

Cigarettes -- Determination of selected volatile organic compounds in the mainstream smoke of cigarettes -- Method using GC/MS

Tobacco and tobacco products -- Determination of tobacco-specific nitrosamines in tobacco products -- Method using LC-MS/MS

Rapeseed -- Determination of glucosinolates content -- Method using high-performance liquid chromatography

Security and resilience -- Guidelines for establishing interoperability among object identification systems to deter counterfeiting and illicit trade

Security and resilience -- Authenticity, integrity and trust for products and documents -- Guidelines for the content, security, issuance and examination of excise tax stamps

Cards and security devices for personal identification -- Contactless proximity objects -- Part 1: Physical characteristics

Cards and security devices for personal identification -- Contactless vicinity objects -- Part 1: Physical characteristics

Cards and security devices for personal identification -- Contactless vicinity objects -- Part 2: Air interface and initialization

Identification cards -- ICC-managed devices -- Part 4: Test methods for logical characteristics

Information technology -- Security techniques -- Key management -- Part 2: Mechanisms using symmetric techniques

Systems and software engineering -- Systems and software assurance -- Part 1: Concepts and vocabulary

Information technology security techniques -- Encryption algorithms -- Part 6: Homomorphic encryption

Information technology -- Cloud computing -- Service level agreement (SLA) framework -- Part 4: Security and privacy

IT security techniques -- Competence requirements for information security testers and evaluators -- Part 1: Introduction, concepts and general requirements

Information technology -- Security techniques -- Competence requirements for information security testers and evaluators -- Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators

Information technology -- Security techniques -- Privacy enhancing data de-identification techniques

Information technology -- Security techniques -- Security guidelines for design and implementation of virtualized servers

Software and systems engineering -- Certification of software and systems engineering professionals -- Part 1: General requirements









Systems and Software Engineering -- Architecture Evaluation 4020 ISO/IEC JTC 1/SC 74020 ISO/IEC JTC 1/SC 7






Sound system equipment - Part 4: Microphones 4020 IEC/TC 1004020 IEC/TC 100

4020 IEC/TC 100

4020 IEC/TC 100

4020 IEC/TC 100

Wireless Power Transfer (WPT) Glossary of Terms (TA 15) 4020 IEC/TC 1004020 IEC/TC 100

4020 ISO/TC 59/SC 13

4020 ISO/TC 59/SC 13

Smart community infrastructures -- Smart transportation for compact cities 5020 ISO/TC 268/SC 1

4020 ISO/TC 268/SC 1

Information technology -- Software and systems engineering -- Tools and methods for product line realization

Information technology -- Software and systems engineering -- Tools and methods for product line testing

Information technology -- Software and systems engineering -- Tools and methods for product line organizational management

Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary

Information technology -- Security techniques -- Electronic discovery -- Part 2: Guidance for governance and management of electronic discovery

Systems and software engineering -- Lifecycle profiles for Very Small Entities (VSEs) -- Part 4-1: Software engineering - Profile specifications: Generic profile group

Systems and software engineering -- Lifecycle profiles for very small entities (VSEs) -- Part 4-3: Service delivery -- Profile specification

Systems and software engineering -- Life cycle processes -- Requirements engineering

Software engineering -- Guidelines for the application of ISO 9001:2015 to computer software

Information technology -- Radio frequency identification for item management -- Unique identification for RF tags -- Part 1: Unique identification for RF tags numbering systems

Information technology -- Radio frequency identification for item management -- Part 2: Unique identification for RF tags registration procedures

Information technology -- Conformance test methods for security service crypto suites -- Part 19: Crypto suite RAMON

Information technology -- Automatic identification and data capture techniques -- Part 21: Crypto suite SIMON security services for air interface communications

Information technology -- Automatic identification and data capture techniques -- Part 22: Crypto suite SPECK security services for air interface communications

Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General (TA 11)

Guideline for synchronization of audio and video - Part 2: Methods for synchronization of audio and video systems (TA 11)

Universal Serial Bus interfaces for data and power - Part 1-4: Common Components – USB Type-C™ Authentication Specification


Car multimedia systems and equipment - Drive monitor system Part 2: Camera interfaces and recording methods

Organization of information about construction works -- Information management using building information modelling -- Part 1: Concepts and principles

Organization of information about construction works -- Information management using building information modelling -- Part 2: Delivery phase of the assets

Smart community infrastructures -- Smart transportation using battery-powered buses for public transportation systems to realize the city centers with zero-emission of greenhouse gases and small particles, the quiet environment and safe bus rides

5020 IEC/TC 3

4020 IEC/TC 3

4020 IEC/SC 23G

4020 IEC/SC 23G

5020 IEC/SC 23G

5020 IEC/SC 23G

5020 IEC/SC 23G

Electrical accessories - Cord sets and interconnection cord sets 5020 IEC/SC 23G

4020 IEC/SC 23E

5020 IEC/SC 23E

4020 IEC/SC 23E

5020 IEC/SC 45A

5020 IEC/SC 45A

5020 IEC/SC 45A

4020 IEC/SC 45A

5020 IEC/SC 45A

4020 IEC/SC 45B

4020 IEC/SC 45A

4020 IEC/SC 45A

5020 IEC/SC 45A

4020 IEC/TC 45

4020 ISO/TC 299

4020 IEC/SC 65B

XML Exchange Formats for Programs according to IEC 61131-3 4020 IEC/SC 65B5020 IEC/SC 65E

4020 IEC/SC 65E

FIELD DEVICE INTEGRATION (FDI) – PART 115-2: Profiles – Modbus-RTU 4020 IEC/SC 65E

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 12: Buildings and building services

Preparation of information for use (instructions for use) of products – Part 1: Principles and general requirements

Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

Appliance couplers for household and similar general purposes - Part 1: General requirements

Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers

Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

Circuit-breakers for overcurrent protection for household and similar installations- Part 3: Circuit-breakers for d.c. operation

Residual Direct Current Detecting Device (RDC-DD) to be used for Mode 3 charging of Electric Vehicle

Power frequency overvoltage protective devices for household and similar applications (POP)

Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Separation

Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods

Nuclear power plants - Instrumentation systems important to safety - Electrical penetration assemblies in containment structures

Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems

Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions

Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials

Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance

Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors

Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices

Nuclear instrumentation - Data format for list-mode digital data acquisition used in radiation detection and measurement

Robotics -- Performance criteria and related test methods for service robots -- Part 2: Navigation

Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors

Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements

FIELD DEVICE INTEGRATION (FDI) – PART 100: Profiles – Generic protocols

5020 IEC/SC 65B

4020 IEC/SC 65B

4020 ISO/TC 299

4020 ISO/TC 299

4020 IEC/TC 66

4020 IEC/TC 66

4020 IEC/TC 66

4020 IEC/TC 66

4020 IEC/CIS/B

4020 IEC/CIS/D

5020 IEC/CIS/F

5020 IEC/CIS/A

4020 IEC/CIS/D

4020 IEC/SC 77A

4020 IEC/TC 82

4020 IEC/TC 82

4020 IEC/TC 82

4020 IEC/TC 82

Test procedure for extended thermal cycling of PV modules 4020 IEC/TC 824020 IEC/TC 82

5020 ISO/TC 44/SC 9

5020 ISO/TC 176/SC 2

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters

PROCESS ANALYSIS TECHNOLOGY SYSTEMS AS PART OF PROCESS CONTROL SAFETY EQUIPMENT

Medical electrical equipment -- Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment

Medical electrical equipment -- Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

Industrial, scientific and medical equipment – Measurement of radiated disturbances - Improvement of repeatability for measurements in the frequency range 1-18 GHz

Vehicles, boats and devices with internal combustion engines or traction batteries – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

Electric and hybrid road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices

Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices

Measurement procedures for materials used in photovoltaic modules – Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials

Environmental health and safety (EH&S) risk assessment of the PV module through the life cycle - General principles and definitions of terms

Health and safety in welding and allied processes -- Requirements, testing and marking of equipment for air filtration -- Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices

Quality management -- Quality of an organization -- Guidance to achieve sustained success

5020 ISO/PC 288

Knowledge management systems -- Requirements 4020 ISO/TC 2604020 ISO/TC 260

5020 ISO/PC 283

5020 ISO/TC 4/SC 5

5020 ISO/TC 22/SC 31

5020 ISO/TC 22/SC 31

5020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 31

5020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 36

4020 ISO/TC 22/SC 36

4020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 31

4020 ISO/TC 22/SC 31

4020 ISO/TC 30/SC 2

Round timber -- Visual characteristics -- Methods of determination 5020 ISO/TC 218Metal halide lamps - Performance specification 5020 IEC/SC 34A

5020 IEC/SC 34C

LED modules for general lighting - Safety specifications 5020 IEC/SC 34A4020 IEC/TC 34

4020 IEC/TC 34

4020 IEC/TC 34

4020 IEC/TC 34

5020 IEC/TC 34

5020 IEC/TC 34

5020 IEC/TC 34

Educational organizations -- Management systems for educational organizations -- Requirements with guidance for use

Human resource management -- Guidelines for human capital reporting for internal and external stakeholders

Occupational health and safety management systems -- Requirements with guidance for use

Rolling bearings -- Cylindrical rollers -- Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers

Road vehicles -- Vehicle to grid communication interface -- Part 8: Physical layer and data link layer requirements for wireless communication

Road vehicles -- Vehicle to grid communication interface -- Part 4: Network and application protocol conformance test

Road vehicles -- Vehicle to grid communication interface -- Part 5: Physical layer and data link layer conformance test

Road vehicles -- Vehicle to grid communication interface -- Part 1: General information and use-case definition

Road vehicles -- Controller area network (CAN) conformance test plan -- Part 2: High-speed medium access unit -- Conformance test plan

Road vehicles -- Information for first and second responders -- Part 3: Emergency response guide template

Road vehicles -- Information for first and second responders -- Part 2: Rescue sheet for buses, coaches and heavy commercial vehicles

Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 1: ExVe content

Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 3: ExVe security

Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 2: ExVe access

Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 4: ExVe control

Road vehicles -- Information for remote diagnostic support -- General requirements, definitions and use cases

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters

Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps

Amendment 1 - Digital addressable lighting interface - Part 101: General requirements - System components

Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear

Digital addressable lighting interface - Part 103: General requirements - Control devices

Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally Supplied Emergency Operation (device type 19)

Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)

Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device type 17)

Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

5020 IEC/TC 34

5020 IEC/TC 34

5020 IEC/TC 34

Amendment 2 - LED modules for general lighting - Performance requirements 4020 IEC/SC 34A

Risk management - Risk assessment techniques 4020 IEC/TC 56Risk management - Risk assessment techniques 4020 IEC/TC 56

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 20

5020 IEC/TC 13

4020 IEC/TC 85

4020 IEC/TC 85

4020 IEC/TC 85

4020 IEC/TC 85

4020 IEC/TC 85

4020 IEC/TC 85

Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)

Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)

Amendment 1 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm

Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conductors

Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

4020 IEC/TC 85

4020 IEC/TC 85

4020 ISO/TC 67/SC 2

4020 ISO/TC 67/SC 2

4020 ISO/TC 67/SC 2

4020 ISO/TC 172/SC 3

4020 IEC/SC 59C

5020 IEC/SC 59K

4020 IEC/SC 59L

Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links 4020 ISO/TC 22/SC 324020 ISO/TC 22/SC 32

5020 ISO/TC 22/SC 32

5020 ISO/TC 22/SC 32

5020 ISO/TC 22/SC 32

5020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

Road vehicles -- Automotive cables -- Part 2: Test methods 4020 ISO/TC 22/SC 324020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

Petroleum and natural gas industry -- Pipeline transportation systems -- Pipeline integrity management specification -- Part 2: Full-life cycle integritymanagement for offshore pipeline

Petroleum and natural gas industry -- Pipeline transportation systems -- Pipeline integrity management specification -- Part 1: Full-life cycle integrity management for onshore pipeline

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 11: Coating repairs on rehabilitation

Optics and photonics -- Optical coatings -- Part 8: Coatings used for laser optics

Amendment 2 - Household electric direct-acting room heaters - Methods for measuring performance

Amendment 2 - Household microwave ovens - Methods for measuring performance

Comfort fans and regulators for household and similar purposes – Methods for measuring performance

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 1: General

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 3: Mechanical loads

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 4: Climatic loads

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 5: Chemical loads

Road vehicles -- Automotive cables -- Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core copper conductor cables

Road vehicles -- Automotive cables -- Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables

Road vehicles -- Automotive cables -- Part 1: Terminology and design guidelines

Road vehicles -- Automotive cables -- Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables

Road vehicles -- Automotive cables -- Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core aluminium conductor cables

Road vehicles -- Automotive cables -- Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables

Road vehicles -- Automotive cables -- Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables

4020 ISO/TC 22/SC 32

4020 ISO/TC 22/SC 32

Interpreting services -- Legal interpreting -- Requirements 4020 ISO/TC 37/SC 54020 ISO/TC 130

International Electrotechnical Vocabulary - Part 485: Fuel cell technologies 4020 IEC/TC 1

4020 ISO/TC 146/SC 5

4020 IEC/TC 31

5020 IEC/SC 62D

4020 IEC/SC 62A

5020 IEC/SC 62D

5020 IEC/SC 62D

5020 IEC/SC 62D

4020 IEC/SC 62B

4020 IEC/SC 62B

4020 IEC/SC 62C

4020 IEC/SC 62C

Health software - Software life cycle processes 4020 IEC/SC 62A4020 IEC/SC 62B

4020 IEC/SC 62D

4020 IEC/SC 62D

4020 IEC/SC 62D

4020 IEC/SC 62D

5020 IEC/SC 62D

5020 IEC/SC 62D

Road vehicles -- Automotive cables -- Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables

Road vehicles -- Automotive cables -- Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables

Graphic technology -- Determination of the energy consumption of digital printing devices including transitional and related modes

Air quality -- Environmental meteorology -- Part 3: Ground-based remote sensing of wind by continuous-wave doppler lidar

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements

Medical Electrical Equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment

Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment

Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

Amendment 2 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and Constancy tests - Imaging performance of computed tomography X-ray equipment

Nuclear medicine instrumentation - Routine tests - Part 2: Scintillation cameras and single photon emission computed tomography imaging

Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators

Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography





Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors

Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers

5020 IEC/SC 62D

Dentistry -- Mixing machines for dental amalgam 5020 ISO/TC 106/SC 64020 ISO/TC 84

Dentistry -- Graphical symbols for dental equipment 5020 ISO/TC 106/SC 6Dentistry -- Central suction source equipment 5020 ISO/TC 106/SC 6Sterile single-use intravascular introducers, dilators and guidewires 4020 ISO/TC 84Non-active surgical implants -- Mammary implants -- Particular requirements 5020 ISO/TC 150

Implants for surgery -- Minimum data sets for surgical implants 4020 ISO/TC 150Non-active surgical implants -- Implant coating -- Part 1: General requirements 5020 ISO/TC 150

5020 ISO/TC 150

Walking trolleys - Requirements and test methods 4020 ISO/TC 1734020 ISO/TC 173

5020 IEC/TC 9

4020 IEC/TC 9

Railway applications - Electromagnetic compatibility - Part 1: General 5020 IEC/TC 95020 IEC/TC 9

5020 IEC/TC 9

5020 IEC/TC 9

5020 IEC/TC 9

5020 IEC/TC 9

4020 IEC/TC 9

5020 IEC/TC 9

Railway applications - Rolling stock - Rules for installation of cabling 5020 IEC/TC 94020 IEC/TC 18

4020 IEC/TC 18

Mobile and fixed offshore units - Electrical installations - Part 2: System design 4020 IEC/TC 18

Mobile and fixed offshore units - Electrical installations - Part 3: Equipment 4020 IEC/TC 18

Mobile and fixed offshore units - Electrical installations - Part 4: Cables 4020 IEC/TC 18

Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units 4020 IEC/TC 18

Mobile and fixed offshore units - Electrical installations - Part 6: Installation 4020 IEC/TC 18

4020 IEC/TC 18

4020 ISO/TC 8

4020 ISO/TC 8

4020 ISO/TC 8

Amendment 2 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation

Sterile hypodermic syringes for single use -- Part 4: Syringes with re-use prevention feature

Implants for surgery -- Cleanliness of orthopedic implants -- General requirements

Assistive products -- Guidelines on cognitive accessibility -- Daily time management

Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication

Railway applications - Rolling stock - Protective provisions against electrical hazards

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

Railway applications - Fixed installations - DC surge arresters and voltage limiting devices - Part 2: Voltage limiting devices

Railway applications - Batteries for auxiliary power supply systems - Part 1: General requirements

Electrical installations in ships - Part 302-2: Marine Power switchgear and controlgear assemblies

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions

Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas

Ships and marine technology -- Aquatic nuisance species -- Part 1: Ballast water discharge sample port

Ships and marine technology -- Cutter suction dredger supervisory and control system

Ships and marine technology -- Hopper dredger supervisory and control system

Ships and marine technology -- Grab dredger supervisory and control system 4020 ISO/TC 8


Standarde române originale în vigoare ce trebuie supuse procedurii de examinare

Minister CT Indicativ SR

1 MADR 97 SR 4895-5:19992 MADR 97 SR 4895-4:1997

3 MADR 97 SR 4895-6:19994 MADR 97 STAS 13076-925 MADR 97 STAS 13084-926 MADR 97 SR 13159:19937 MADR 97 SR 13160:19938 MADR 97 SR 13165:19939 MADR 97 SR 13244:1999

10 MADR 97 SR 13332:199611 ME 9 STAS 4264-8612 ME 9 STAS 6797-8113 ME 9 STAS 7208-8314 ME 9 STAS 10802-80

15 ME 11 STAS 552-8916 ME 11 STAS 3184/3-85

17 ME 11 STAS 3184/4-88

18 ME 11 STAS 4002-74

19 ME 42 STAS 436-9020 ME 42 SR 438-2:201221 ME 42 SR 438-4:2012

22 ME 42 SR 438-1:2012

23 ME 42 SR 438-3:201224 ME 42 STAS 505-8625 ME 42 STAS 564-8626 ME 42 STAS 794-9027 ME 46 STAS 4485-7628 ME 46 STAS 9144/7-7229 ME 46 STAS 9144/1-8630 ME 46 STAS 9144/2-8631 ME 46 STAS 9320-7832 ME 46 STAS 9472/6-7333 ME 46 STAS 9706-7434 ME 55 SR 74:199435 ME 55 STAS 185/6-89

36 ME 55 STAS 185/2-89

37 ME 55 STAS 185/4-90

38 ME 55 STAS 185/1-89

39 ME 55 STAS 185/3-89

40 ME 55 STAS 185/5-89

41 ME 59 STAS 139-7942 ME 59 STAS 250-61

Nr crt

43 ME 59 STAS 253-7744 ME 59 STAS 350-8245 ME 59 STAS 353-8646 ME 59 STAS 354-6747 ME 59 STAS 358-9048 ME 59 STAS 359-9149 ME 59 STAS 360-6750 ME 59 STAS 361-8051 ME 76 STAS 6581-81

52 ME 76 STAS 6635-87

53 ME 76 STAS 6688-86

54 ME 76 STAS 6927-8155 ME 76 STAS 7326-74

56 ME 76 STAS 7327-8057 ME 76 STAS 7636-8858 ME 76 STAS 9361-90

59 ME 76 STAS 9421-8760 ME 76 STAS 9815/1-91

61 ME 76 STAS 11040-88

62 ME 76 STAS 12880-9063 ME 77 STAS 269-7764 ME 77 STAS 495/3-8065 ME 77 STAS 495/2-7666 ME 77 STAS 495/1-7667 ME 77 STAS 496-8068 ME 77 STAS 657-7669 ME 77 STAS 839/6-87

70 ME 78 STAS 839/1-87

71 ME 78 STAS 839/2-8672 ME 78 STAS 839/4-87

73 ME 78 STAS 839/3-86

74 ME 78 STAS 839/5-87

75 ME 78 STAS 843/2-8376 ME 85 SR 1944-1:1999

77 ME 85 SR 1944-2:199978 ME 85 SR 1944-3:200079 ME 85 SR 1944-4:199980 ME 88 SR 3788:199481 ME 88 STAS 6627-8982 ME 88 STAS 7003-9083 ME 88 SR 10437:2000

84 MM 53 STAS 1253-8085 MM 53 STAS 2211-8086 MM 53 SR 9081:199587 MM 53 STAS 10195-7588 MM 53 STAS 10329-7589 MM 53 STAS 10331-9290 MM 53 STAS 10812-7691 MM 53 STAS 10813-7692 MM 360 SR 13330:2007

93 MM 360 SR 13343:1996

94 MM 360 SR 13350:199695 MM 360 SR 13387:1997

96 MM 360 SR 13481:2003

97 MM 360 SR 13493:2004

98 MM 360 SR 13526:2008


Standarde române originale în vigoare ce trebuie supuse procedurii de examinare

Titlu

Tutun şi produse de tutun. Determinarea conţinutului de azot total

Tutun şi produse de tutun. Determinarea conţinutului total de proteineTutun. Determinarea conţinutului de nervură principalăTutun. Determinarea masei unităţii de suprafaţă a limbului foliarTutun şi produse din tutun. Determinarea conţinutului de potasiuTutun şi produse din tutun. Determinarea anionului clorTutun. Seminţe pentru însămânţare

Tutun şi produse de tutun. Determinarea indicelui de fermentareSonerii şi buzere electrice. Condiţii tehnice de calitateLimitatoare de cursă pentru instalaţii de ridicat şi transportat. Condiţii tehnice de calitateElectromagneţi de acţionare. Condiţii tehnice speciale de calitate

Doze de aparat şi doze de ramificaţie pentru instalaţii electrice. Dimensiuni

Semifabricate de oţel. Blumuri, sleburi şi tagleProduse de oţel pentru armarea betonului. Partea 2: Sârmă rotundă trefilată

Produse de oţel pentru armarea betonului. Partea 3: Plase sudateOţel laminat la cald. Table groase. Condiţii tehnice de calitateOţel laminat la cald. Oţel UOţel laminat la cald. Oţel rotund pentru organe de asamblare. DimensiuniPulberi metalice. Pulberi de zincZinc praf. Determinarea granulaţieiPulbere de zinc. Indicaţii generale pentru efectuarea analizei chimicePulbere de zinc. Determinarea conţinutului de zinc metalicPulberi metalice. Pulberi de fierAliaje dure sinterizate. Determinarea rezistivităţiiPulberi metalice. Pulberi de tantalDesene tehnice. Împăturire

Notarea filetelorConuri pentru scule. Pene de evacuare pentru cozi metrice şi Morse. Dimensiuni

Tutun şi produse de tutun. Determinarea conţinutului în zaharuri reducătoare totale, zaharuri solubile şi substanţe reducătoare totale. Metoda manganometrică

Tutun şi produse de tutun. Determinarea conţinutului de polifenoli, exprimat ca acid clorogenic, prin metoda spectrometrică

Fiabilitatea aparatajului de joasă tensiune. Metoda statistică de determinare a anduranţei mecanice limitată la nivel de fiabilitate specificat

Prize, fişe şi cuple pentru instalaţii electrice până la 380 V curent alternativ şi 250 V curent continuu şi până la 25 A. Forme şi dimensiuni

Prize, fişe şi cuple pentru instalaţii electrice până la 380 V curent alternativ şi 250 V curent continuu până la 25 A. Calibre de verificare a prizelor şi fişelor până la 250 V şi până la 16 A

Materiale auxiliare pentru reţele şi instalaţii electrice. Cleme de şir pentru circuite cu conductoare din cupru şi aluminiu. Condiţii tehnice speciale de calitate

Produse de oţel pentru armarea betonului. Partea 4: Sârmă cu profil periodic obţinută prin deformare plastică la rece

Produse de oţel pentru armarea betonului. Partea 1: Oţel beton laminat la cald. Mărci şi condiţii tehnice de calitate

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Aparate de măsurat şi de control. Semne convenţionale

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Fitinguri şi piese auxiliare pentru conducte. Semne convenţionale

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Obiecte de uz gospodăresc, corpuri de încălzire, guri de aer. Semne convenţionale

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Conducte pentru fluide. Semne şi culori convenţionale

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Armături. Semne convenţionale

Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Agregate, aparate, rezervoare. Semne convenţionale

Conuri pentru scule. Racordarea la sculă a conurilor metrice şi MorseCuţite de strung, raboteză şi morteză. TerminologieCuţite de strung cu tăiş din oţel rapid. Cuţite pentru retezat. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţite lamă pentru retezat. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţit frontal. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţit lateral. DimensiuniCuţite de morteză cu tăiş din oţel rapid. Cuţit pentru canale de pană. DimensiuniCuţite de morteză cu tăiş din oţel rapid. Cuţit pentru canelat. Dimensiuni

Pistoane din aluminiu pentru motoare de autovehicule şi compresoare. Condiţii tehnice de calitate

Segmenţi de piston pentru motoare de autovehicule şi compresoare. Metode de încercarePulverizatoare pentru motoare cu aprindere prin compresie. Reguli şi metode de încercare

Motoare cu ardere internă. Pompe de injecţie în linie. Încercări pe standElement filtrat, cu hârtie, pentru motorinăMotoare cu ardere internă. Filtre fine pentru uleiul de ungere. Condiţii tehnice generale de calitate

Motoare cu aprindere prin comprimare. Injectoare mărimea S. DimensiuniRadiatoare de apă pentru motoare cu ardere internă, cu piston. Condiţii tehnice generale de calitate

Motoare cu ardere internă, cu piston. Metodă de măsurare a nivelurilor de zgomotUnelte agricole. SapeCazmale forjate. Tipuri şi dimensiuniCazmale presate. Tipuri şi dimensiuniCazmale. Condiţii tehnice generale de calitateUnelte de mână. Furci pentru agriculturăGreble pentru grădinărie

Valve pentru biciclete. DimensiuniValve tip AC şi AT pentru pneuri de autocamioane şi mijloace de transport uzinal. Dimensiuni

Valve tip M pentru camerele de aer ale motoretelor, motocicletelor şi scuterelor. Dimensiuni

Vehicule rutiere, tractoare şi maşini agricole. Accesorii de valve. Dimensiuni

Instalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 2: Cârlige cu tija neprelucratăInstalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 3: Cârlige cu tijă filetatăInstalaţii de ridicat. Cârlige simple forjate cu tijă. Partea 4: Filet rotundFoarfece de uz general. Condiţii tehnice generale de calitatePensule pentru vopsitorie şi pictură. Condiţii tehnice generale de calitatePerii din păr, fire sintetice şi fibre vegetale. Condiţii tehnice generale de calitate

Meteorologie. Mărimi caracteristice aerului umedRecalcularea masei materialelor şi produselor higroscopiceCalitatea aerului. VocabularPuritatea aerului. Determinarea pulberilor sedimentabilePuritatea aerului. Determinarea bioxidului de azotPuritatea aerului. Principii şi reguli generale de supraveghere a calităţii aeruluiPuritatea aerului. Determinarea amoniaculuiPuritatea aerului. Determinarea pulberilor în suspensieSalubrizarea localităţilor. Termeni şi definiţii

Pompe de injecţie pentru motoare termice. Pompe de alimentare cu piston. Parametri şi dimensiuni principale

Motoare cu ardere internă pentru autovehicule şi tractoare agricole. Reguli şi metode de încercare pe banc

Aparate pentru măsurarea opacităţii gazelor de evacuare la motoarelor cu aprindere prin comprimare

Valve hidropneumatice tip THP pentru camerele de aer ale tractoarelor, maşinilor agricole şi remorcilor agricole. Dimensiuni

Valve pentru camere de aer şi pentru anvelope fără camere de aer. Condiţii tehnice generale de calitate

Valve tip C pentru camerele de aer ale autobuzelor, vehiculelor utilitare şi vehiculelor tractate. Dimensiuni

Instalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 1: Condiţii tehnice pentru materiale, execuţie şi livrare

Articole de uz casnic de material plastic care intră în contact cu alimentele. Condiţii tehnice generale de calitate

Salubrizarea localităţilor. Deşeuri urbane şi rurale. ClasificareSalubrizarea localităţilor. Deşeuri urbane. Prescripţii de proiectare a punctelor pentru precolectare

Caracterizarea deşeurilor. Metodologie de caracterizare a deşeurilor menajere - ROMECOM

Salubrizarea localităţilor. Deşeuri urbane. Prescripţii generale de proiectare pentru depozitarea controlată

Recipiente de colectare a deşeurilor înţepătoare-tăietoare rezultate din activităţi medicale. Specificaţii şi încercări

Salubrizarea localităţilor. Deşeuri urbane. Prescripţii pentru proiectarea punctelor de precolectare selectivă


Teme de standarde române originale noi propuse a fi elaborate

Minister CT Indicativ SR Titlu

1 187 SR 1848-1:2018

2 187 SR 1848-2:2018

3 187 SR 1848-3:2018

4 187 SR 1848-3:2018

5 187 SR 1910:2017

6 187 SR 1948-1:2018

7 187 SR 1948-2:2018

8 187 SR 2920:2017 Poduri de şosea. Supravegheri şi revizii tehnice

9 187 SR 5626:2017 Poduri. Terminologie

10 187 SR 11348:2017

11 187 SR 12313:2017

12 187 SR 12313:2017

13 187 SR 12504:2017

14 187 SR 13576:2018 Mixturi bituminoase stocabile. Specifica?ii de material

15 ME 165 SR EN 50341-2-xx

16 ME 298 SR EN 13624:2014/C91:2018

17 MM 360 SR 13493:2018

Nr crt

MDRAPFE

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 1: Clasificare, simboluri şi amplasare

MDRAPFE

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 2: Condiţii tehnice

MDRAPFE

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 3: Scriere, mod de alcătuire

MDRAPFE

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 3: Scriere, mod de alcătuire

MDRAPFE

Poduri de beton, beton armat şi beton precomprimat. Suprastructură. Condiţii generale de execuţie

MDRAPFE

Lucrări de drumuri. Stâlpi de ghidare şi parapete. Prescripţii generale de proiectare şi amplasare pe drumuri

MDRAPFE

Lucrări de drumuri. Parapete pe poduri. Prescripţii generale de proiectare şi amplasare

MDRAPFE

MDRAPFE

MDRAPFE

Lucrări de drumuri. Îmbrăcăminţi bituminoase pentru calea de pod. Condiţii tehnice generale de calitate

MDRAPFE

Poduri de cale ferată şi şosea. Încercarea pe stand a elementelor prefabricate din beton, beton armat şi beton precomprimat

MDRAPFE

Poduri de cale ferată şi şosea. Încercarea pe stand a elementelor prefabricate din beton, beton armat şi beton precomprimat

MDRAPFE

Poduri de cale ferată, de şosea şi pasarele. Încercarea suprastructurilor cu acţiuni de probă

MDRAPFE

Linii electrice aeriene mai mari de 45 kV, curent alternativ. Partea 2: Lista normativelor naţionale

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)

Caracterizarea deşeurilor. Metodologie de caracterizare a deşeurilor menajere - ROMECOM


Minister CT Titlu TC

1 MADR 180 ISO/TS 22003:2013 ISO/TC 34/SC 17

2 MAP 52 ISO 9174:1998 ISO/TC 147/SC 2

3 MCSI 208 ISO/IEC 27003:2017

4 MCSI 208 ISO/IEC 27004:2016

5 MCSI 208 ISO/IEC 27006:2015

6 MCSI 208

7 136 IEC/TC 64

8 147 ISO 16494:2014 ISO/TC 86/SC 6

9 201 ISO 13348:2007 ISO/TC 117

10 ME 55 ISO 3864-4:2011 ISO/TC 145/SC 2

11 ME 56 ISO 2859-3:2005 ISO/TC 69/SC 5

12 ME 56 ISO 3534-2:2006 ISO/TC 69/SC 1

13 ME 59 ISO 15243:2017 ISO/TC 4

14 ME 97 ISO 8243:2013 Cigarettes -- Sampling ISO/TC 126

15 ME 97 ISO 10315:2013 ISO/TC 126

16 ME 218 ISO 8133:2014 ISO/TC 131/SC 3

17 ME 357 ISO 12963:2017 ISO/TC 158

18 ME 357 ISO/TC 193

Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin publicarea versiunii române

Nr crt

Indicativ international

Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems

Water quality -- Determination of chromium -- Atomic absorption spectrometric methods

Information technology -- Security techniques -- Information security management systems -- Guidance

ISO/IEC JTC 1/SC 27

Information technology -- Security techniques -- Information security management -- Monitoring, measurement, analysis and evaluation

ISO/IEC JTC 1/SC 27

Information technology -- Security techniques -- Requirements for bodies providing audit and certification of information security management systems

ISO/IEC JTC 1/SC 27

ISO/IEC 27034-1:2011

Information technology -- Security techniques -- Application security -- Part 1: Overview and concepts

ISO/IEC JTC 1/SC 27

MDRAPFE

IEC TR 60479-5:2007/C1:2013

Corrigendum 1 - Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects

MDRAPFE

Heat recovery ventilators and energy recovery ventilators -- Method of test for performance

MDRAPFE

Industrial fans -- Tolerances, methods of conversion and technical data presentation

Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials

Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures

Statistics -- Vocabulary and symbols -- Part 2: Applied statistics

Rolling bearings -- Damage and failures -- Terms, characteristics and causes

Cigarettes -- Determination of nicotine in smoke condensates -- Gas-chromatographic method

Hydraulic fluid power -- Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

Gas analysis -- Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration

ISO/TR 15403-2:2006

Natural gas - Natural gas for use as a compressed fuel for vehicles -- Part 2: Specification of the quality

19 ME 357 ISO/TR 26762:2008 ISO/TC 193/SC 3

20 MEN 229 ISO 1086:1991 Information and documentation -- Title leaves of books ISO/TC 46

21 MEN 229 ISO 6357:1985 ISO/TC 46

22 MEN 229 ISO/TR 26122:2008 ISO/TC 46/SC 11

Natural gas -- Upstream area -- Allocation of gas and condensate

Documentation -- Spine titles on books and other publications

Information and documentation -- Work process analysis for records


Minister CT IndicativDocRef Titlu_EN

1 MCSI 208 ISO/IEC 27031:2011

2 ME 56 ISO 10667-1:2011

3 ME 103 ISO 8559-1:2017

4 MEN 229 ISO 690:2010

5 MEN 229 ISO 25964-1:2011

6 MEN 229 ISO 27729:2012

7 MEN 229 ISO/TR 28118:2009

8 MMJS 176 IEC 61482-2:2009

9 MMJS 227 ISO 11613:2017

Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare

Nr crt

Information technology -- Security techniques -- Guidelines for information and communication technology readiness for business continuity

Assessment service delivery -- Procedures and methods to assess people in work and organizational settings -- Part 1: Requirements for the client

Size designation of clothes -- Part 1: Anthropometric definitions for body measurement

Information and documentation -- Guidelines for bibliographic references and citations to information resources

Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 1: Thesauri for information retrieval

Information and documentation -- International standard name identifier (ISNI)

Information and documentation -- Performance indicators for national libraries

Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements

Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting -- Laboratory test methods and performance

TC

ISO/IEC JTC 1/SC 27

ISO/TC 260

ISO/TC 133

ISO/TC 46/SC 9

ISO/TC 46/SC 9

ISO/TC 46/SC 9

ISO/TC 46/SC 8

IEC/TC 78

ISO/TC 94/SC 14

Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare

MinisterMADRMAIMCMDRAPMECRMAMENCSMMFPSPVMMAPMSMCSIMT

Directiva

1015/2010

1016/2010

1060/2010

107/2009

1194/2012

1275/2008

1907/2006

2014/53/EU 1999/5/EC

2001/16/EC2001/95/EC2003/2003

2003/44/EC

223/2012

2002/40/EC2004/22/EC

2006/42/EC2007/23/EC

2007/47/EC

2008/57/EC

2009/125/EC

2009/105/EC 2014/29/EU

2009/142/EC2009/48/EC2009/128/EC

2010/30/EU2011/65/EU2013/53/EU 94/25/EC

2014/31/EU2014/33/EU 95/16/EC

2014/34/EU 94/9/EC

2014/68/EU

2015/1095

2016/2281

206/2012

244/2009

245/2009

278/2009

305/2011

392/2012

547/2012

548/2014552/2004

65/2014

2014/30/EU 2004/108/EC

2014/35/EU 2006/95/EC

66/2014

617/2013

640/2009

641/2009643/2009

665/2013

666/2013

765/200889/686/EEC

811/2013

812/2013

813/2013

814/2013

90/385/EEC

92/42/EEC

92/75/EEC93/42/EEC

93/95/EEC

96/60/EC

97/23/EC97/67/EC

98/79/EC

932/2012

DenumireMinisterul Agriculturii şi Dezvoltării RuraleMinisterul Afacerilor InterneMinisterul CulturiiMinistrul Dezvoltării Regionale şi Administraţiei PubliceMin Economiei, Comerţului şi Relaţiilor cu Mediul de AfaceriMin Educaţiei Naţionale şi Cercetării ŞtiinţificeMinisterul Muncii, Familiei, Protecţiei Sociale şi Persoanelor VârstniceMinistrul Mediului, Apelor şi PădurilorMinisterul SanătăţiiMin Comunicaţiilor şi pentru Societatea InformaţionalăMinisterul Transporturilor

Descriere

Directiva 1999/5/EC privind echipamentele radio și echipamentele terminale de telecomunicații

Securitatea generală a produselor (GPS)Regulamentul (CE) 2003/2003 al Parlamentului European și al Consiliului din 13 octombrie 2003 privind îngrășămintele

Directiva privind mijloacele de măsurare

Pyrotechnic articles directive

Regulamentul (UE) nr. 1015/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat rufe de uz casnic

Regulamentul (UE) nr. 1016/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat vase de uz casnic

Completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului cu privire la cerințele de etichetare energetică a aparatelor frigorifice de uz casnic

Regulamentul (CE) nr. 107/2009 al Comisiei din 4 februarie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru unitățile simple de conversie semnal

Regulamentul (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminiscente și echipamentele aferente

Regulamentul (CE) nr. 1275/2008 al Comisiei din 17 decembrie 2008 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de ecoproiectare pentru consumul de energie electrică în modul standby și oprit al echipamentelor electrice și electronice de uz casnic și de birou

Regulamentul (CE) nr. 1907/2006 al Parlamentului European și al Consiliului privind înregistrarea, evaluarea, autorizarea și restricționarea substanțelor chimice (REACH)

Directivei 2001/16/CE a Parlamentului European și a Consiliului din 19 martie 2001 privind interoperabilitatea sistemului de transport feroviar convențional transeuropean

Directiva 2003/44/CE a Parlamentului European și a Consiliului din 16 iunie 2003 de modificare a Directivei 94/25/CE privind apropierea actelor cu putere de lege și a actelor administrative ale statelor membre referitoare la ambarcațiunile de agrement

Commission Regulation (EU) No 223/2012 of 14 March 2012 amending Regulation (EC) No 2003/2003 of the European Parliament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV thereto to technical progress Text with EEA relevance

Directiva 2002/40/CE a Comisiei din 8 mai 2002 de aplicare a Directivei 92/75/CEE a Consiliului cu privire la etichetarea energetică a cuptoarelor electrice de uz casnic

Directiva 2006/42/CE a Parlamentului European și a Consiliului din 17 mai 2006 privind echipamentele tehnice și de modificare a Directivei 95/16/CE (reformare)

Directiva 2007/47/CE a Parlamentului European și a Consiliului din 5 septembrie 2007 de modificare a Directivei 90/385/CEE a Consiliului privind apropierea legislațiilor statelor membre referitoare la dispozitivele medicale active implantabile, a Directivei 93/42/CEE a Consiliului privind dispozitivele medicale și a Directivei 98/8/CE privind comercializarea produselor biodestructive (AIMD amendament)

Directiva 2008/57/CE a Parlamentului European și a Consiliului din 17 iunie 2008 privind interoperabilitatea sistemului feroviar în Comunitate (reformare)

Directiva 2009/105/CE a Parlamentului European și a Consiliului din 16 septembrie 2009 referitoare la recipientele simple sub presiune

Directiva 2009/125/CE a Parlamentului European și a Consiliului din 21 octombrie 2009 de instituire a unui cadru pentru stabilirea cerințelor în materie de proiectare ecologică aplicabile produselor cu impact energetic

Directiva 2009/48/CE a Parlamentului European și a Consiliului din 18 iunie 2009 privind siguranța jucăriilorPesticide

Restricţionarea utilizării anumitor substanţe periculoase în echipamentul electric şi electronicDirectiva referitoare la ambarcațiunile de agrement (RCD)

Compatibilitatea electromagnetică (EMC)

Ascensoare

Iinteroperabilitatea rețelei europene de gestionare a traficului aerian

Directiva 2009/142/CE a Parlamentului European și a Consiliului din 30 noiembrie 2009 privind aparatele consumatoare de combustibili gazoși

Indicarea, prin etichetare și informații standard despre produs, a consumului de energie și de alte resurse al produselor cu impact energetic

Directiva 2014/31/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislației statelor membre referitoare la punerea la dispoziție pe piață a aparatelor de cântărit cu funcționare neautomată

Directiva 2014/34/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislațiilor statelor membre referitoare la echipamentele și sistemele de protecție destinate utilizării în atmosfere potențial explozive (reformare) (ATEX)

Directiva 2006/95/CE a Parlamentului European și a Consiliului din 12 decembrie 2006 privind armonizarea legislațiilor statelor membre referitoare la echipamentele electrice destinate utilizării în cadrul unor anumite limite de tensiune (versiune codificată) (LVD)

Directiva 2014/68/UE a Parlamentului European și a Consiliului din 15 mai 2014 privind armonizarea legislației statelor membre referitoare la punerea la dispoziție pe piață a echipamentelor sub presiune

Regulamentul (UE) 2015/1095 al Comisiei din 5 mai 2015 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică aplicabile dulapurilor frigorifice de depozitare profesionale, dulapurilor frigorifice de răcire și congelare rapidă, unităților de condensare și răcitoarelor pentru procese

Regulamentului (UE) 2016/2281 al Comisiei de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile produselor pentru încălzirea aerului, produselor pentru răcire, răcitoarelor industriale cu temperaturi înalte și ventiloconvectoarelor

Regulamentul (UE) nr. 206/2012 al Comisiei din 6 martie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aparatele de climatizare și ventilatoarele de confort

Regulamentului (CE) nr. 244/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpi de uz casnic nondirecționale, modificat prin Regulamentul (CE) nr. 859/2009 al Comisiei din 18 septembrie 2009 în ceea ce privește cerințele de proiectare ecologică referitoare la radiația ultravioletă a lămpilor de uz casnic nondirecționale și a Regulamentului delegat (UE) nr. 874/2012 al Comisiei din 12 iulie 2012 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a lămpilor electrice și a corpurilor de iluminat, precum și a Regulamentului (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminiscente și echipamentele aferente

Regulamentul (CE) nr. 245/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile lămpilor fluorescente fără balast încorporat, lămpilor cu descărcare de intensitate ridicată, precum și balasturilor și corpurilor de iluminat compatibile cu aceste lămpi, și de abrogare a Directivei 2000/55/CE a Parlamentului European și a Consiliului

Regulamentul (CE) nr. 278/2009 al Comisiei din 6 aprilie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru puterea absorbită în regim fără sarcină și pentru randamentul mediu în regim activ al surselor externe de alimentare

Regulamentul (UE) nr. 305/2011 al Parlamentului European şi al Consiliului din 9 martie 2011 de stabilire a unor condiţii armonizate pentru comercializarea produselor pentru construcţii şi de abrogare a Directivei 89/106/CEE a Consiliului (CPR)

Regulamentul (UE) nr . 392/2012 al Comisiei din 1 martie 2012 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului cu privire la cerințele de etichetare energetică a uscătoarelor de rufe de uz casnic cu tambur

Regulamentul (UE) nr. 547/2012 al Comisiei din 25 iunie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru pompele de apă

Regulamentul (UE) nr. 548/2014 al Comisiei din 21 mai 2014 privind punerea în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește transformatoarele de putere mici, medii și mari

Regulamentul delegat (UE) nr. 65/2014 al Comisiei din 1 octombrie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a cuptoarelor și a hotelor de bucătărie de uz casnic

Cerințele de proiectare ecologică pentru aparatele frigorifice de uz casnic

Echipament individual de protecție (PPE)

Directiva referitoare la Dispozitivele Medicale Active Implantabile (AIMD)

Directiva 93/42/CEE a Consiliului din 14 iunie 1993 privind dispozitivele medicaleEchipament individual de protecție. Amendament 89/686/EEC

Servicii postale

Regulamentul (UE) nr. 66/2014 al Comisiei din 14 ianuarie 2014 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile cuptoarelor, plitelor de gătit și hotelor de bucătărie de uz casnic

Regulamentului (UE) nr. 617/2013 al Comisiei de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile computerelor și serverelor informatice

Regulamentul (CE) nr. 640/2009 al Comisiei din 22 iulie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru motoarele electrice

Regulamentul (CE) nr. 641/2009 al Comisiei din 22 iulie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile pompelor de circulație fără etanșare independente și pompelor de circulație fără etanșare integrate în produse

Regulamentul delegat (UE) nr. 665/2013 al Comisiei din 3 mai 2013 de completare a Directivei 2010/30/UE a Parlamentului European şi a Consiliului în ceea ce priveţte etichetarea energetică a aspiratoarelor

Regulamentul (UE) nr. 666/2013 al Comisiei din 8 iulie 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aspiratoare

Regulament (EC) Nr 765/2008 al Parlamentului European și a Consiliului din 9 Julie 2008 de stabilire a cerinţelor pentru acreditare şi supravegherea pieţei referitor la marketing-ul produselor şi abrogând Regulamentul (EEC) Nr 339/93

Regulamentul delegat (UE) nr. 811/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea incintelor, a instalațiilor de încălzire cu funcție dublă, a pachetelor de instalație pentru încălzirea incintelor, regulator de temperatură și dispozitiv solar și a pachetelor de instalație de încălzire cu funcție dublă, regulator de temperatură și dispozitiv solar

Regulamentul delegat (UE) nr. 812/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea apei, a rezervoarelor pentru apă caldă și a pachetelor de instalație pentru încălzirea apei și dispozitiv solar

Regulamentul (UE) nr. 813/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea incintelor și instalațiile de încălzire cu funcție dublă

Regulamentul (UE) nr. 814/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea apei și rezervoarele de apă caldă

Directiva 92/42/CEE a Consiliului din 21 mai 1992 privind cerințele de randament pentru cazanele noi de apă caldă cu combustie lichidă sau gazoasă

Directiva 92/75/CEE a Consiliului din 22 septembrie 1992 privind indicarea, prin etichetare și informații standard despre produs, a consumului de energie și de alte resurse la aparatele de uz casnic

Directiva 96/60/CE a Comisiei din 19 septembrie 1996 de punere în aplicare a Directivei 92/75/CEE a Consiliului cu privire la etichetarea energetică a mașinilor combinate de spălat și uscat rufe de uz casnic

Directiva 97/23/CE a Parlamentului European și a Consiliului din 29 mai 1997 de apropiere a legislațiilor statelor membre referitoare la echipamentele sub presiune

Directiva 98/79/CE a Parlamentului European și a Consiliului din 27 octombrie 1998 privind dispozitivele medicale pentru diagnostic in vitro

Regulamentul (UE) nr. 932/2012 al Comisiei din 3 octombrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile uscătoarelor de rufe de uz casnic cu tambur

€¦ · XLS file · Web view · 2018-03-13EN 62488-2:2017 Power line communication systems for...

Documents

Transcript of €¦ · XLS file · Web view · 2018-03-13EN 62488-2:2017 Power line communication systems for...