XDXRF Method for Tier 3 Ruling

8
© 2015 HORIBA, Ltd. All rights reserved. 1 EDXRF Method for Ultralow Level Sulfur in Gasoline Analysis to Comply with US EPA Tier 3 Ruling As per 40 CFR Part 80 Subpart H – Gasoline Sulfur HORIBA Sulfur-in-Oil Analyzers Part I in a Series on EDXRF for Tier 3 ULSG

Transcript of XDXRF Method for Tier 3 Ruling

Page 1: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 1

EDXRF Method for

Ultralow Level Sulfur in Gasoline Analysis to

Comply with US EPA Tier 3 RulingAs per 40 CFR Part 80 Subpart H – Gasoline Sulfur

HORIBA Sulfur-in-Oil Analyzers

Part I in a Series on EDXRF for Tier 3 ULSG

Page 2: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 2

Gasoline Supply Chain Responsible for ComplianceProducers .. Refiners .. Blenders .. Suppliers .. Transporters .. Terminals .. Storage

1) ULSG is an acronym for Ultra Low Sulfur in Gasoline.

2) The Tier 3 Ruling reduces allowed sulfur concentrations in gasoline from an average of 30 mg/kg to an average of 10 mg/kg beginning in 2017.

3) Refiners, importers and biofuel blenders of gasoline will be required to perform sulfur analysis at these ultra-low levels to report compliance throughout the supply chain.

4) The Ruling also enacted use of a PBMS (Performance Based Measurement System) approach to allow reporting laboratories new flexibility regarding the sulfur test method they may use.

5) Use of a consensus group (e.g. ASTM) standardized test method (e.g. ASTM D7220) and mandatory quality control practices validate adequate measurement quality.

5 Things to Know About the USA EPA Tier 3 Ruling for ULSG

Page 3: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 3

ASTM D7220 Method Complies with PBMS Requirements

The recently revised ASTM D7220 Sulfur Test Method, initially used for EPA’s 2006 Diesel Ruling which reduced allowed sulfur concentration down to 15PPM, can also be utilized to meet EPA’s Tier 3 Ruling.

Page 4: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 4

5 Things to Know About ASTM D7220-12 for Sulfur Testing

1) It is a standard test method for sulfur in automotive, heating & jet fuels using monochromatic Energy Dispersive X-ray Fluorescence (EDXRF) Spectrometry.

2) A monochromatic X-ray beam improves EDXRF detection limits of sulfur by producing a focused energy excitation for sulfur while reducing interfering signals from the x-ray tube background as well as other elements in the sample.

3) It has a sulfur determination range of 3-942 mg/kg sulfur with a Pooled Limit of Quantification (PLOQ) of 3 mg/kg sulfur, well below the Tier 3 average allowable limit of 10 mg/kg.

4) Its expansive analysis range for sulfur concentration in fuel is applicable to a variety of fuel types: gasoline, oxygen enriched gasoline (RFG), diesel, diesel/biodiesel blends containing up to 50% by volume biodiesel, kerosene, jet fuel, jet fuel/biodiesel blends containing up to 5% by volume biodiesel, and #2 home heating oil.

5) An EDXRF Spectrometer that meets ASTM D7220-12’s is commercially available.

Page 5: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 5

Results are in Immediately Usable Formats

Large Screen Display:Easy viewing screen displays real-time data to check the measurement conditions.

Large Printouts:Printouts show vital information including sample ID, X-ray spectrum, date and time, measurement average value, standard deviation ad calibration curve graph.

Connections:Two USB ports: one on the back and one on the side, a PS2 Connection and a USB port for a mouse or keyboard and a direct Ethernet connection to the web for customer support located on the rear panel.

The MESA-7220 Meets the ASTM D7220 Method Requirements

Page 6: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 6

5 Things to Know About the MESA-7220 for Tier 3 Sulfur Testing

1) The MESA-7220 requires minimal space because this vacuum based analyzer is compact and self-contained with integrated electronics and computer.

2) It requires only a stable source of electrical power (100/250 VAC), but no other utilities or gases.

3) It can be used at back-up locations and in mobile labs because of its low weight and transportable case.

4) It provides the cost benefit of measuring other elements simultaneously with sulfur if desired.

5) Its value for Tier 3 ULSG measurements may achieve a return on investment in less than one week for a 8/5/52 work schedule.

Page 7: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 7

http://www.horiba.com

1) Order Your Own2) Schedule a Demonstration3) Request a Quote4) Browse Our Website5) Call, e-Mail or Write Us

Learn More About the MESA-7220 EDXRF

1-800-446-7422

HORIBA INSTRUMENTS

SLFA Products9755 Research Drive

Irvine, CA 92618 USA

Page 8: XDXRF Method for Tier 3 Ruling

© 2015 HORIBA, Ltd. All rights reserved. 8

Danke

Gracias

Большое спасибо

GrazieاُشْكرΣας ευχαριστούμε

감사합니다Obrigado

Tacka dig

谢谢ขอบคณุครบั

ありがとうございました

धन्यवादநன்ற

Cảm ơn