xConnect 2016 -...
Transcript of xConnect 2016 -...
xConnect 2016Quicker and simpler distribution with corrugated stainless steel
Valid pricelist from 1. 12. 2015. Above end prices are recommended with VAT.
EN
Quick and simple distribution with Flexira xConnect
House distribution can significantly influence living quality and the whole service of a building. Hygiene and reliability are on the first place, that's why we are introducing a smart piping system from surgical steel. During development we not only think about the utility value for the customer but also easy installation. Our own development and production enabled us to deliver a unique piping system with which it is pleasure to work.
“We make hoses on which people's lives depend, so you can trust us”— Jan Tumpach, production foreman
During special industrial hose production we can't afford to make a mistake. People's lives depend on this.We test each piece for leaks. We devote the same care to Flexira xConnect piping system.
Contents
PIPING
Piping system ________________________________________________________6
Piping – sold in meters ______________________________________________ 10
Tools ______________________________________________________________ 12
O-ring connections _________________________________________________ 14
Flat gasket connections ______________________________________________ 18
Piping for solar systems _____________________________________________ 22
Thermal fuses for gas distribution _____________________________________ 24
Gas faucets ________________________________________________________ 25
CONNECTION HOSES
Gas hoses __________________________________________________________ 26
Tap water hoses ____________________________________________________ 34
CONNECTION SETS
Connection sets ____________________________________________________ 38
Piping for fire sprinkler systems _______________________________________ 42
P. 10
PIPING FOR HEATING SYSTEMS
P. 42
PIPING FOR FIRE SPRINKLER SYSTEMS
P. 38
CONNECTION SETS
P. 25
GAS FAUCETS
P. 34
TAP WATER HOSES
P. 22
SOLAR SYSTEM PIPING
P. 26
GAS HOSES
6 PiPing 7PiPing
xConnect piping System
Using the corrugated stainless steel, in case of domestic distribution, has many advantages. You can easily bend the pipes and for example install them with thermal insulation straight away. This extremely quickens the job done. Plus stainless steel is the best material, which you can use for drinking water, heating and gas, because it's health harmless and it has unlimited service life.
O-RING CONNECTIONSYou can join corrugated stainless steel quickly and simply without tools. The perfectly tight joint, versatile for all utilities. The connection doesn't have to be accessible from the wall.*
FLAT GASKET CONNECTIONSThe easiest corrugated stainless steel pressing in the world. The unique handle presser easily makes a straight surface, which makes a perfectly tight joint together with a union nut and a flat gasket.
xConnect System xConnect System
O-RINGSFLAT GASKET
SEALING SURFACE
LOCKING RINGNUT NUT
* You can find detailed information about the correct installation in the PTN norm which is downloadable on www.flexira.eu.
NEW
8 PiPing 9PiPing
PROTECTIVE COATING STEELPROTECT
Limpid plastic coating adds protection against chemicals, cleaning products or walls to the stainless steel pipe. The price is the same as with the pipe without coating.
ONLY THE BEST STEEL ENSURES THE BIGGEST ENDURANCE
We care about the fact that distribution in the house lasts longer than the house itself and that the drinking water is being lead in the best possible material. That is why we use surgical steel AISI 316L. Not only is it very resistant, but it also provides absolute hygienic safety.
VERSATILE PIPE FOR ALL UTILITIES
Make your life easier. Use just one pipe and connection elements for all utilities. Flexira xConnect piping System O and T are certified for drinking water, gas and solar fillings and also other utilities* at an authorised person of EEA Brno. The certificate with number B-30-01237-15 is valid all over Europe.
xConnect piping System
QUALITY WHICH YOU DON'T FIND ANYWHERE ELSE, THANKS TO THE UNIQUE ANNEALING PROCEDURE
Not only do we care about the pipe quality, but also that your job goes well with it. The point is, that it bends easily and holds form perfectly. The ruffle of the pipe changes the crystal structure of the stainless steel material in a so called corrugator and that's why the pipe is more solid, flexible and doesn't bend so easily. To give the pipe the required features, we have set up a unique production procedure, where we anneal it in a protected atmosphere of hydrogen. That's why our pipes are more resistant, unstretchable and you can work better with them.
SIMPLE CONNECTION TO ANY PIPE
xConnect System For a joint tightened with O-rings you don't need any special tools. The created joint is perfectly tight.
xConnect System You need to make a sealing surface with the special Flexira xConnect T 120 press for a joint tightened by flat gasket.
O-RINGSLOCKING
KEYFLAT
GASKETCOUPLING COUPLING
PROTECTIVE COATING STEELPROTECT
H
PIPING, WHICH QUICKENS YOUR JOB
Each bend on a straight pipe means two joints with the potencial risk of leaks and a waste of time of up to 15 minutes. Minimalize the number of joints, not only do you have greater certainty, but also easier, quicker and more effective work done with corrugated stainless steel.
* You can find detailed information about correct installation in PTN norm which is downloadable on www.flexira.eu.
10 11PiPing PiPing
PIPE PROTECTOR
Protector
DIMENSION ARTICLE NUMBER PRICE*
DN8 yellow FLX.15-031-101 0,49 €
DN12 yellow FLX.15-031-201 0,69 €
DN16 yellow FLX.15-031-301 0,89 €
DN20 yellow FLX.15-031-401 1,19 €
DN25 yellow FLX.15-031-501 1,39 €
DN8 blue FLX.15-031-102 0,49 €
DN12 blue FLX.15-031-202 0,69 €
DN16 blue FLX.15-031-302 0,89 €
DN20 blue FLX.15-031-402 1,19 €
DN25 blue FLX.15-031-502 1,39 €
DN8 red FLX.15-031-103 0,49 €
DN12 red FLX.15-031-203 0,69 €
DN16 red FLX.15-031-303 0,89 €
DN20 red FLX.15-031-403 1,19 €
DN25 red FLX.15-031-503 1,39 €
Minimal consumption is 5 m
PIPE WITH A PROTECTIVE COATING STEELPROTECT
STEELPROTECT: PROTECTiVE COATing
5 YEARS gUARAnCY
QUALiTY STAinLESS STEEL AiSi 316L
VERSATiLE FOR WATER, gAS, HEATing
PIPE WITH INSULATION PES 20 MM
PIPE
QUALiTY STAinLESS STEEL AiSi 316L
VERSATiLE FOR WATER, gAS AnD HEATing
xConnect piping System – sold in meters
* Given end prices are recommended with VAT for 1 m.** Given end prices are recommended with VAT for the whole package
5 m 30 m 60 m
Pipe with protective coating Pipe with PES insulation
DIMENSION LENGTH ARTICLE NUMBER PRICE/m* PRICE** ARTICLE NUMBER PRICE/m* PRICE**
DN8
5 m FLX.14-002-861-5000 8,20 € 40,99 € — — —
30 m FLX.14-002-861-0003 7,83 € 234,99 € — — —
60 m FLX.14-002-861-0006 7,25 € 434,99 € — — —
DN12
5 m FLX.14-002-862-5000 9,40 € 46,99 € — — —
30 m FLX.14-002-862-0003 9,17 € 274,99 € FLX.03-220-330-0003 13,67 € 409,99 €
60 m FLX.14-002-862-0006 8,67 € 519,99 € FLX.03-220-330-0006 13,17 € 789,99 €
DN16
5 m FLX.14-002-863-5000 10,80 € 53,99 € — — —
30 m FLX.14-002-863-0003 10,50 € 314,99 € FLX.03-230-330-0003 15,00 € 449,99 €
60 m FLX.14-002-863-0006 10,00 € 599,99 € FLX.03-230-330-0006 14,50 € 869,99 €
DN18
5 m FLX.14-002-864-5000 12,20 € 60,99 € — — —
30 m FLX.14-002-864-0003 11,83 € 354,99 € FLX.03-240-330-0003 16,33 € 489,99 €
60 m FLX.14-002-864-0006 11,33 € 679,99 € FLX.03-240-330-0006 15,83 € 949,99 €
DN20
5 m FLX.14-002-865-5000 13,60 € 67,99 € — — —
30 m FLX.14-002-865-0003 13,17 € 394,99 € FLX.03-250-330-0003 17,67 € 529,99 €
60 m FLX.14-002-865-0006 12,67 € 759,99 € FLX.03-250-330-0006 17,33 € 1 039,99 €
DN23
5 m FLX.14-002-866-5000 14,80 € 73,99 € — — —
30 m FLX.14-002-866-0003 14,50 € 434,99 € FLX.03-260-330-0003 19,00 € 569,99 €
60 m FLX.14-002-866-0006 14,08 € 844,99 € FLX.03-260-330-0006 18,67 € 1 119,99 €
DN25
5 m preparing 16,20 € 80,99 € — — —
30 m preparing 15,83 € 474,99 € FLX.03-270-330-0003 20,33 € 609,99 €
60 m preparing 15,42 € 924,99 € FLX.03-270-330-0006 20,00 € 1 199,99 €
Pipe
DIMENSION LENGTH ARTICLE NUMBER PRICE/m* PRICE**
DN8
5 m FLX.14-002-921-5000 8,20 € 40,99 €
30 m FLX.14-002-921-0003 7,83 € 234,99 €
60 m FLX.14-002-921-0006 7,25 € 434,99 €
DN12
5 m FLX.14-002-922-5000 9,40 € 46,99 €
30 m FLX.14-002-922-0003 9,17 € 274,99 €
60 m FLX.14-002-922-0006 8,67 € 519,99 €
DN16
5 m FLX.14-002-923-5000 10,80 € 53,99 €
30 m FLX.14-002-923-0003 10,50 € 314,99 €
60 m FLX.14-002-923-0006 10,00 € 599,99 €
DN18
5 m FLX.14-002-924-5000 12,20 € 60,99 €
30 m FLX.14-002-924-0003 11,83 € 354,99 €
60 m FLX.14-002-924-0006 11,33 € 679,99 €
DN20
5 m FLX.14-002-925-5000 13,60 € 67,99 €
30 m FLX.14-002-925-0003 13,17 € 394,99 €
60 m FLX.14-002-925-0006 12,67 € 759,99 €
DN23
5 m FLX.14-002-926-5000 14,80 € 73,99 €
30 m FLX.14-002-926-0003 14,50 € 434,99 €
60 m FLX.14-002-926-0006 14,08 € 844,99 €
DN25
5 m FLX.14-002-927-5000 16,20 € 80,99 €
30 m FLX.14-002-927-0003 15,83 € 474,99 €
60 m FLX.14-002-927-0006 15,42 € 924,99 €
12 PiPing 13PiPing
Tools for the xConnect System
CUTTER 250
PRESS T 120 IN A DURABLE TRANSPORT CASE
GREASE IN A TUBE
O-RING FITTER
DESCRIPTION ARTICLE NUM. PRICE*
O-ring fitter DN12 FLX.14-080-026 7,49 €
O-ring fitter DN16 FLX.14-080-027 7,49 €
O-ring fitter DN20 FLX.14-080-028 7,49 €
O-ring fitter DN25 FLX.14-080-029 7,49 €
DESCRIPTION ARTICLE NUM. PRICE*
Presser T 120 in durable case FLX.03-001-002 299.99 €
DESCRIPTION ARTICLE NUM. PRICE*
Grease 25 ml FLX.15-052-007 11,29 €
DESCRIPTION ARTICLE NUM. PRICE*
Cutter O&T 250 FLX.03-002-003 44.99 €
* Given end prices are recommended with VAT for 1 piece.
Tech
nica
l par
amet
res
Dimension and delivered lengths Ø DN8 to Ø DN25 5 m, 30 m, 60 m
Operating temperature
O-ring joint:
Pressed endings:Solder endings: Welded endings: Pipes with coating:
Gas −20 to + 100°C, water −40 to +100°C, air −50 to + 150°C−40 to +200°C−20 to +250°C −40 to +350°C max +100°C
Pressure
Max. operating pressure:
Max. operating overpressure for heating gas:
PN 16 (16 bar)
pressed endings 0.5 bar (50 kPa), solder and welded endings 5 bar (0,5 MPa), O-ring 0.1 bar
Utilities Drinking water, gas, steam, other utilities after consultation with producer
Pipe
leng
ths
DIMENSION OUTER AVERAGE INNER AVERAGE WALL THICKNESS UNION NUT(UNION OUTER THREAD) NOTE
DN8 11.7 mm 8.1 mm 0.26 mm G3/8" (GA3/8")
DN12 15.6 mm 12.0 mm 0.30 mm G1/2" (GA1/2")
DN16 20.1 mm 15.7 mm 0.30 mm G3/4" (GA3/4")
DN18 21.6 mm 17.9 mm 0.30 mm G3/4"
DN20 25.0 mm 19.7 mm 0.30 mm G1" (GA1")
DN23 27.9 mm 23.0 mm 0.30 mm G1"
DN25 32.8 mm 26.5 mm 0.30 mm G5/4" (GA5/4")
Standard system measurement Optional size mounting of the system on customers request (possible to press with the press).
Dimensions DN32, DN40 and DN50 are possible to buy ended from production, not a part of this system.
Cut the pipe in the middle of a ruffle (at the point of the smallest bore) with the Flexira xConnect O&T 250 cutter, to the required length. Place the cutter on the pipe and gradually tighten the cutting wheel during the cutting procedure.
CUTTING A PIPE
Ending TypesR = external conical thread (EN ISO 10226-1)Rp = internal thread (EN ISO 10226-1)G = external and internal cylindrical thread (ISO 228-1) – for flat sealing
14 PiPing 15PiPing
xConnect System – Connection with O-rings
Fitting the O-ringsWith the Flexira O-ring Fitter the job will be done easily. You will not cut yourself on the edge and on the cartridge of the handle you will have enough O-rings ready.
Pipe connectionAfter fitting the nut, locking ring onto the third wave ad 2 O-rings and now it's enough to just grease the O-rings with a little grease, insert into the competent pipe fitting marked System O and tighten the nut.
2
1
CONNECTION PROCEDURE
CONNECTION ELEMENTSMARKING
All accessory elements for the connection with O-rings are marked with the symbol . Elements, which you can use for both systems are marked .
Connect the corrugated stainless steel without tools
Connect the corrugated stainless steel quickly and simply without tools. A perfectly tight joint for all utilities. It doesn't
have to be accessible from the wall.* * You can find detailed information about correct installation in PTN norm which is downloadable on www.flexira.eu.
NEW
SYMBOL FOR xCONNECT SYSTEM
SYMBOL FOR xCONNECT
SYSTEM
16 PiPing 17PiPing
xConnect System Connection elements COUPLING
SCREW COUPLING UNREDUCED
SCREW COUPLING UNREDUCED
DIMENSION ARTICLE NUM. PRICE*
DN12–G1/2" FLX.14-040-632 4.59 €
DN16–G3/4" FLX.14-040-633 6.39 €
DN20–G1" FLX.14-040-635 10.79 €
DN25–G5/4" FLX.14-040-637 22.99 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN16–R1/2" FLX.14-040-613 6.39 €
DN20–R3/4" FLX.14-040-615 8.99 €
DN25–R1" FLX.14-040-617 17.99 €
DN16–Rp1/2" FLX.14-040-623 6.39 €
DN20–Rp3/4" FLX.14-040-625 8.99 €
DN25–Rp1" FLX.14-040-627 17.99 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN16–DN16 FLX.14-040-653 4.59 €
DN20–DN20 FLX.14-040-655 6.39 €
DN25–DN25 FLX.14-040-657 10.79 €
Packed with 5 pcs
REDUCTION SET
DIMENSION ARTICLE NUM. PRICE*
DN20 > DN16 FLX.14-040-645 4.59 €
DN25 > DN20 FLX.14-040-647 5.39 €
Packed with 2 pcs
NIPPLE
DIMENSION ARTICLE NUM. PRICE*
DN20–G1 FLX.14-040-685 13.59 €
Packed with 2 pcs
* Given end prices are recommended with VAT for 1 piece. ** Other utilities according to PTN norm, which is downloadable on www.flexira.eu.
NUT T-COUPLING
DIMENSION ARTICLE NUM. PRICE*
DN16–DN16–DN16 FLX.14-040-603 8.99 €
DN20–DN16–DN20 FLX.14-040-695 13.59 €
DN25–DN20–DN25 FLX.14-040-697 17.99 €
Packed with 2 pcs
LOCKING RING
DIMENSION ARTICLE NUM. PRICE*
DN12 FLX.14-096-022 0.49 €
DN16 FLX.14-096-012 0.49 €
DN20 FLX.14-096-011 0.89 €
DN25 FLX.14-096-028 1.39 €
Packed with 50 pcs
DISTRIBUTOR
DIMENSION ARTICLE NUM. PRICE*
DN20–DN16– DN16–DN20 FLX.14-040-665 20.99 €
Packed with 2 pcs
WALL PLATE UNREDUCED
DIMENSION ARTICLE NUM. PRICE*
DN16–Rp1/2" FLX.14-040-673 7.49 €
DN20–Rp3/4" FLX.14-040-675 11.29 €
Packed with 2 pcs
O-RING GASO-RING WATER (DRINKING, HEATING, FOR SOLAR)**
DIMENSION ARTICLE NUM. PRICE*
DN12 FLX.15-022-402 0.25 €
DN16 FLX.15-022-403 0.25 €
DN20 FLX.15-022-405 0.35 €
DN25 FLX.15-022-407 0.49 €
DN20 with reduction set FLX.15-022-445 0.35 €
DN25 with reduction set FLX.15-022-447 0.49 €
Packed with 50 pcs
DIMENSION ARTICLE NUM. PRICE*
DN12 FLX.15-022-422 0.25 €
DN16 FLX.15-022-423 0.25 €
DN20 FLX.15-022-425 0.25 €
DN25 FLX.15-022-427 0.25 €
DN20 with reduction set FLX.15-022-465 0.25 €
DN25 with reduction set FLX.15-022-467 0.25 €
Packed with 50 pcs
VERSATiLE FOR WATER, gAS, HEATing
DIMENSION ARTICLE NUMBER PRICE*
DN12 G1/2" FLX.14-040-102 1.19 €
DN16 G3/4" FLX.14-040-103 1.39 €
DN20 G1" FLX.14-040-105 2.29 €
DN25 G5/4" FLX.14-040-107 4.59 €
Packed with 10 pcs
18 PiPing 19PiPing
xConnect System – connection with flat gasket
Pipe pressingInsert the pipe into the lower jaws, close it, so that the last 3 ruffles of the pipe stay loose for pressing. Press down the press handle to a horizontal position.
Pipe connectionBefore pressing it is necessary to put a nut on the pipe. After creating the sealing surface with the presser add a flat gasket and tighten the nut with a torque spanner to a pipe fitter type System T.
1
2
* You can find detailed information about the correct installation in the PTN norm which is downloadable on www.flexira.eu.
CONNECTION PROCEDURE
The easiest corrugated stainless steel press in the worldUnique handle presser easily makes a straight surface, which creates the perfect joint with the union nut and gasket.
CONNECTION ELEMENTS MARKING
All accessory elements for the connection with a flat gasket are marked with the symbol . Elements, which you can use for both systems are marked . SYMBOL FOR
xCONNECT SYSTEM
SYMBOL FOR xCONNECT
SYSTEM
20 PiPing 21PiPing
xConnect System Connection elements COUPLING
SCREW COUPLING UNREDUCED
T-COUPLING
SCREW COUPLING UNREDUCED
FLAT GASKET
SCREW COUPLING REDUCED
DIMENSION ARTICLE NUM. PRICE*
DN8 G3/8"–G3/8" FLX.14-040-301 1.39 €
DN12 G1/2"–G1/2" FLX.14-040-302 2.29 €
DN16 G3/4"–G3/4" FLX.14-040-303 3.19 €
DN20 G1"–G1" FLX.14-040-304 5.39 €
DN25 G5/4"–G5/4" FLX.14-040-305 11.29 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN8 3×G3/8" FLX.14-040-321 4.59 €
DN12 3×G1/2" FLX.14-040-322 5.39 €
DN16 3×G3/4" FLX.14-040-323 8.09 €
DN20 3×G1" FLX.14-040-324 13.59 €
Packed with 2 pcs
DIMENSION ARTICLE NUM. PRICE*
DN12 G1/2"–R3/8" FLX.14-040-502 3.19 €
DN16 G3/4"–R1/2" FLX.14-040-512 4.59 €
DN20 G1"–R3/4" FLX.14-040-522 6.79 €
DN25 G5/4"–R1" FLX.14-040-532 11.29 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN12 G1/2"–Rp3/8" FLX.14-040-501 3.19 €
DN16 G3/4"–Rp1/2" FLX.14-040-511 3.19 €
DN20 G1"–Rp3/4" FLX.14-040-521 4.59 €
DN25 G5/4"–Rp1" FLX.14-040-531 8.99 €
Packed with 5 pcs
DIMENSION ARTCLE NUM. PRICE*
3/8" 15/8×2 FLX.15-021-013 0.15 €
1/2" 18,5/12×2 FLX.15-021-023 0.15 €
3/4" 24/16×2 FLX.15-021-033 0.15 €
1" 30/20×2 FLX.15-021-043 0.20 €
1" 30/23×3 FLX.15-021-045 0.20 €
5/4" 38,5/25×2 FLX.15-021-053 0.20 €
Packed with 50 pcs
DIMENSION ARTICLE NUM. PRICE*
DN8 G3/8"–R3/8" FLX.14-040-351 1.89 €
DN12 G1/2"–R1/2" FLX.14-040-352 2.29 €
DN16 G3/4"–R3/4" FLX.14-040-353 3.19 €
DN20 G1"–R1" FLX.14-040-354 5.39 €
DN25 G5/4"–R5/4" FLX.14-040-355 11.29 €
Packed with 5 pcs
* Given end prices are recommended with VAT for 1 piece.
NUT
EXTERNAL REDUCER TO COPPER
EXTERNAL THREAD
INTERNAL REDUCER TO COPPER
DIMENSION ARTICLE NUM. PRICE*
G1/2"×15 mm FLX.24-001-001 3.19 €
G1/2"×18 mm FLX.24-001-002 3.19 €
G3/4"×15 mm FLX.24-001-007 3.19 €
G3/4"×18 mm FLX.24-001-003 3.19 €
G3/4"×22 mm FLX.24-001-004 3.19 €
G1"×22 mm FLX.24-001-006 4.59 €
G1"×28 mm FLX.24-001-005 4.59 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN8 G3/8" FLX.14-040-101 0.89 €
DN12 G1/2" FLX.14-040-102 1.19 €
DN16 G3/4" FLX.14-040-103 1.39 €
DN18 G3/4" FLX.14-040-104 1.39 €
DN20 G1" FLX.14-040-105 2.29 €
DN23 G1" FLX.14-040-106 2.29 €
DN25 G5/4" FLX.14-040-107 4.59 €
Packed with 10 pcs
DIMENSION ARTICLE NUM. PRICE*
G1/2"×15 mm FLX.24-001-011 3.19 €
G1/2"×18 mm FLX.24-001-012 3.19 €
G3/4"×15 mm FLX.24-001-017 3.19 €
G3/4"×18 mm FLX.24-001-013 3.19 €
G3/4"×22 mm FLX.24-001-014 3.19 €
G1"×22 mm FLX.24-001-016 4.59 €
G1"×28 mm FLX.24-001-015 4.59 €
Packed with 5 pcs
DIMENSION ARTICLE NUM. PRICE*
DN8 GA3/8" FLX.14-040-141 0.89 €
DN12 GA1/2" FLX.14-040-142 1.19 €
DN16 GA3/4" FLX.14-040-143 1.39 €
DN20 GA1" FLX.14-040-144 2.29 €
DN25 GA5/4" FLX.14-040-145 4.59 €
Packed with 10 pcs
VERSATiLE FOR WATER, gAS, HEATing
22 PiPing 23PiPing
PIPE WITH INSULATION PES 20 MM
SOLAR CONNECTION DUO
ACCESSORIES
DESCRIPTION ARTICLE NUMBER PRICE**
Fastening set for solar connection FLX.03-004-008 2.79 €
Gaskets for solar connection 3⁄4" 24/17" × 2 (Packed with 10 pcs) FLX.15-021-030 0.69 €
Gaskets for solar connection 1" 30/23" × 2 (Packed with 10 pcs) FLX.15-021-040 0.89 €
Two-core cable for solar connections FLX.15-039-201 0.49 €
Adhesive tape for solar connections FLX.15-059-001 4.59 €
xConnect piping System for solar systems
Did you know...If you only need one pipe for your solar instalation, you can use the pipe with PES 20mm insulation (page 10).
* Given end prices are recommended with VAT for 1 m.** Given end prices are recommended with VAT for 1 piece.** Given end prices are recommended with VAT for the whole
package
DNLENGTH 30 M LENGTH 60 M
ARTICLE NUMBER PRICE* PRICE** ARTICLE NUMBER PRICE* PRICE**
Premium
DN16 FLX.03-230-346-0003 29,00 € 869,99 € FLX.03-230-346-0006 28,17 € 1 689,99 €
DN20 FLX.03-250-346-0003 34,67 € 1 039,99 € FLX.03-250-346-0006 33,50 € 2 009,99 €
Basic
DN16 FLX. 03-730-420-0003 20,00 € 599,99 € FLX. 03-730-420-0006 19,00 € 1 139,99 €
Duo Premium – stainless steel AISI 316L, wall thickness 0.3 mm, insulation PES 20 mm • Duo Basic – stainless steel AISI 304, wall thickness 0.2 mm, insulation PES 10 mm
DNLENGTH 30 M LENGTH 60 M
ARTICLE NUMBER PRICE* PRICE** ARTICLE NUMBER PRICE* PRICE**
DN12 FLX.03-220-330-0003 13,67 € 409,99 € FLX.03-220-330-0006 13,17 € 789,99 €
DN16 FLX.03-230-330-0003 15,00 € 449,99 € FLX.03-230-330-0006 14,50 € 869,99 €
DN18 FLX.03-240-330-0003 16,33 € 489,99 € FLX.03-240-330-0006 15,83 € 949,99 €
DN20 FLX.03-250-330-0003 17,67 € 529,99 € FLX.03-250-330-0006 17,33 € 1 039,99 €
DN23 FLX.03-260-330-0003 19,00 € 569,99 € FLX.03-260-330-0006 18,67 € 1 119,99 €
DN25 FLX.03-270-330-0003 20,33 € 609,99 € FLX.03-270-330-0006 20,00 € 1 199,99 €
24 PiPing 25PiPing
DIMENSIONS ARTICLE NUMBER PRICE*
Rp1⁄2"–R1⁄2" FLX.02-010-011 14.99 €
Rp1⁄2"–Rp1⁄2" FLX.02-010-012 14.99 €
Rp3⁄4"–R3⁄4" FLX.02-010-015 22.99 €
Rp3⁄4"–Rp3⁄4" FLX.02-010-016 22.99 €
Rp1"–R1" FLX.02-010-019 29.99 €
Rp1"–Rp1" FLX.02-010-020 29.99 €
DN32 Rp5⁄4"–Rp5⁄4" FLX.22-010-001 189.99 €
DN32 Rp5⁄4"–R5⁄4" FLX.22-010-002 189.99 €
DN40 Rp6⁄4"–Rp6⁄4" FLX.22-010-003 229.99 €
DN40 Rp6⁄4"–R6⁄4" FLX.22-010-004 229.99 €
DN50 Rp2"–Rp2" FLX.22-010-005 304.99 €
DN50 Rp2"–R2" FLX.22-010-006 304.99 €
DIMENSION ARTICLE NUMBER PRICE*
Rp1⁄2"–Rp1⁄2" FLX.22-115-202 27.99 €
Rp3⁄4"–Rp3⁄4" FLX.22-115-203 37.99 €
Rp1"–Rp1" FLX.22-115-204 49.99 €
Rp5⁄4"–Rp5⁄4" FLX.22-115-205 194.99 €
Rp6⁄4"–Rp6⁄4" FLX.22-115-206 214.99 €
Rp2"–Rp2" FLX.22-115-207 304.99 €
DIMENSIONS ARTICLE NUMBER PRICE*
DN32 FLX.22-010-051 379.99 €
DN40 FLX.22-010-052 454.99 €
DN50 FLX.22-010-053 524.99 €
DN65 FLX.22-010-054 2,439.99 €
DN80 FLX.22-010-055 2,999.99 €
DN100 FLX.22-010-056 3,739.99 €
DN125 FLX.22-010-057 4,679.99 €
DN150 FLX.22-010-058 5,609.99 €
DN200 FLX.22-010-059 7,469.99 €
Thermal fuse for gas distribution
* Given end prices are recommended with VAT for 1 piece.
End typesR = male conical thread (EN ISO 10226-1)Rp = female thread (EN ISO 10226-1)G = external and internal cylindrical thread (ISO 228-1) – for flat sealingIn the title the thread valve inlet is shown first, then on the output.
GAS FAUCET
SAFETY GAS FAUCET
THREADED FUSES
FLANGED FUSES
FUSES WITH A VALVE
DIMENSION ARTICLE NUM. PRICE*
R1⁄2"–G1⁄2" – straight FLX.22-120-101 24.99 €
Rp1⁄2"–G1⁄2" – straight FLX.22-120-102 24.99 €
Rp1⁄2"–Rp1⁄2" – straight FLX.22-120-105 24.99 €
R1⁄2"–G1⁄2" – angle FLX.22-120-111 24.99 €
Rp1⁄2"–G1⁄2" – angle FLX.22-120-112 24.99 €
Rp1⁄2"–Rp1⁄2" – angle FLX.22-120-115 24.99 €
DIMENSION ARTICLE NUMBER PRICE*
R1⁄2"–G1⁄2" – angle with butterfly FLX.22-110-001 9.49 €
Rp1⁄2"–G1⁄2" – angle with butterfly FLX.22-110-002 9.49 €
R1⁄2"–G1⁄2" – angle with child's lock FLX.22-110-011 10.39 €
Rp1⁄2"–G1⁄2" – angle with child's lock FLX.22-110-012 10.39 €
Gas faucet
* Given end prices are recommended with VAT for 1 piece.
THERMAL FUSE
FLOW FUSE
PUSH AnD TURn FUSE
26 27COnnECTiOn HOSES COnnECTiOn HOSES
Gas connection hoses xConnect Gas
Disconnect your gas cooker safely at home!Safe bayonet quick release allows quick connection or disconnection with a simple turn of the handle.
Gas hoses which you can trust
Some detergents are very aggressive towards stainless steel. We thought about that too and we added limpid coating.
When respecting the manual conditions, the corrugated stainless steel has unlimited service life, just like piping.
The swivel ending protects the hose against damage, because it stops the torsion going into the hose.
All gas hoses Flexira xConnect Gas meet the requirements of fire endurance norm up to 650°C for 30 min.
Safe quick release allows quick and simple disconnection of the hose just by turning the handle.
28 29COnnECTiOn HOSES COnnECTiOn HOSES
Rp
G
G
R
Which endings to choose?The input on the gas appliance is always provided with an external thread. That is either cylindrical (flat sealing) or conical (sealed into the thread). According to that you choose the correct counterpart as shown in the picture.
Safety with steelprotect elements
Safe swivel ending protects stainless steel hose against damage, because it stops the torsion going into the hose.
Protective coating prevents aggressive chemicals (like detergents) disrupt the stainless steel.
Stainless steel braiding ensures maximum mechanical protection (only with Gas Plus and Premium).
Premium connection with safety quick release
1 Connect it by putting on the bayonet
2 Fix it, by turning
3 By finishing the turn you open the gas lock
Safety quick release allows you to disconnect the hose by an easy turn of the handle.
DESCRIPTION ARTICLE NUMBER PRICE*
Detect Spray 400 ml FLX.24-110-003 7.69 €
Detect Barrel 10 l FLX.24-110-010 93.99 €
Detect Barrel 200 l FLX.24-110-011 1,239.99 €
FUSION FOR LEAK DETECTION
Test the joint quality quickly and easily
* Given end prices are recommended with VAT for 1 piece.
30 31COnnECTiOn HOSES COnnECTiOn HOSES
150 cm150 cm
50 cm50 cm
Premium connection, which is worth it
Gas Premium With the intergated lockLength 50 cm
44.99 €
Gas Basic Length 150 cm Price 22.99 €
Total
47.48 €
Installation of a common gas hose Screw the hose to the gas cooker (1), then to the safety faucet (2) then move the cooker closer (3).
The Gas Premium hose installationScrew the hose to the gas appliance (1), move the cooker closer (2) and insert the bayonet lock (3).
Gas Standard Length 150 cm Price 29.99 €
Total
54.48 €
Gas Plus Length 150 cm Price 36.99 €
Total
61.48 €
The safety gas faucet Price 24.49 €
+
+
+
* Given end prices are recommended with VAT for 1 piece.
Thanks to the bayonet lock you will need a shorter hose then usual
1
1 2
2
3
3
The comparison of gas premium hoses and hoses without the integrated valve
32 33COnnECTiOn HOSES COnnECTiOn HOSES
Gas connection hoses xConnect Gas
Gas Plus
Gas Premium
Plus
LENGTHARTICLE NUMBER
PRICE*R1/2"–G1/2" R1/2"–RP1/2" G1/2"–G1/2"
50 cm FLX.01-103-418-0500 FLX.01-103-419-0500 FLX.01-103-613-0500 22.99 €
100 cm FLX.01-103-418-1000 FLX.01-103-419-1000 FLX.01-103-613-1000 29.99 €
125 cm FLX.01-103-418-1250 — — 33.99 €
150 cm FLX.01-103-418-1500 FLX.01-103-419-1500 FLX.01-103-613-1500 37.99 €
200 cm FLX.01-103-418-2000 FLX.01-103-419-2000 FLX.01-103-613-2000 44.99 €
Prem
ium
LENGTHARTICLE NUMBER
PRICE*G1/2"–DN12 + 657TAE RP1/2"–DN12 + 657TAE
50 cm FLX.01-103-647-0500 FLX.01-103-645-0500 44.99 €
100 cm FLX.01-103-647-1000 FLX.01-103-645-1000 51.99 €
150 cm FLX.01-103-647-1500 FLX.01-103-645-1500 59.99 €
FiRE RESiSTAnCE 650°C
FiRE RESiSTAnCE 650°C
STEELPROTECT: PROTECTiVE COATing
STEELPROTECT: PROTECTiVE COATing
STEELPROTECT: SWiVEL EnDing
STEELPROTECT: SWiVEL EnDing
10 YEAR gUARAnTEE
QUiCK RELEASE WiTH THE THERMAL FUSE
10 YEAR gUARAnTEE
Gas pressure 0.5 bar • diameter DN12 • it meets the norm requirements ČSN EN 14800, ČSN EN 1775, TPG 704 01
* Given end prices are recommended with VAT for 1 piece.
Gas Basic
Gas Standard
Basic
LENGTHARTICLE NUMBER
PRICE*R1/2"–G1/2"
100 cm FLX.01-103-098-1000 14.99 €
150 cm FLX.01-103-098-1500 22.99 €
Stan
dard
LENGTHARTICLE NUMBER
PRICE*R1/2"–G1/2" R1/2"–RP1/2" G1/2"–G1/2" R1/2"–G3/4"
50 cm FLX.01-103-105-0500 FLX.01-103-107-0500 FLX.01-103-106-0500 FLX.01-103-108-0500 14.99 €
100 cm FLX.01-103-105-1000 FLX.01-103-107-1000 FLX.01-103-106-1000 FLX.01-103-108-1000 22.99 €
150 cm FLX.01-103-105-1500 FLX.01-103-107-1500 FLX.01-103-106-1500 FLX.01-103-108-1500 29.99 €
200 cm FLX.01-103-105-2000 FLX.01-103-107-2000 FLX.01-103-106-2000 FLX.01-103-108-2000 37.99 €
300 cm FLX.01-103-105-3000 FLX.01-103-107-3000 FLX.01-103-106-3000 FLX.01-103-108-3000 51.99 €
Stan
dard
LENGTHARTICLE NUMBER
PRICE*R3/4"–G3/4"
50 cm FLX.01-103-109-0500 18.99 €
100 cm FLX.01-103-109-1000 25.99 €
150 cm FLX.01-103-109-1500 33.99 €
STEELPROTECT: PROTECTiVE COATing
STEELPROTECT: PROTECTiVE COATing
FiRE RESiSTAnCE 650°C
FiRE RESiSTAnCE 650°C
STEELPROTECT: SWiVEL EnDing
5 YEAR gUARAnTEE
Drinking water pressure 10 bars • gas 1 bar • dimension DN12 • meets the norm requirements ČSN EN 1775, ČSN EN 10380, TPG 704 01
34 35COnnECTiOn HOSES COnnECTiOn HOSES
Water connection hoses xConnect Aqua
NEW
The hose, that never floods you out!Through a ruptured rubber hose leaks approximately 1,500 litres of water in an hour. Such an amount we never let through to your house equipment, because we make only the most resistant hoses form corrugated stainless steel.
Our houses are made, so that they last forever.
Some detergents are very aggressive towards stainless steel. We thought about that too and added limpid coating.
Stainless steel braiding with rubber hoses isn't protected against detergents on chlorine basis, that's why it gets damaged and ruptures.
Stainless steel of the best quality AISI 316L is the supreme material for leading drinking water. It is absolutely health harmless.
With common hoses, rubber can change the taste of drinking water.
When respecting the manual conditions, the corrugated stainless steel has unlimited service life, just like piping.
Compared to that the common rubber hose lasts approximately 5 to 10 years.
Stainless steel endings welded straightly to the corrugated stainless steel never loosen. We tested it to 16 bars!
Rubber hoses are provided with pressed endings, which often don't resist water pressure over 10 bars.
36 37COnnECTiOn HOSES COnnECTiOn HOSES
xConnect AquaTap water hose connection
Tap water Toilet
PRESSURE TESTED UP TO 16 BAR
STEELPROTECT: PROTECTiVE COATing
UnLiMiTED SERViCE LiFE
Tap
LENGTHARTICLE NUMBER
PRICE*G3/8"–M10×1 S G3/8"–M10×1 L G1/2"–M10×1 L
30 cm FLX.01-102-101-0300 FLX.01-102-102-0300 FLX.01-102-103-0300 22.99 €
40 cm FLX.01-102-101-0400 FLX.01-102-102-0400 FLX.01-102-103-0400 22.99 €
60 cm LX.01-102-101-0600 FLX.01-102-102-0600 FLX.01-102-103-0600 22.99 €
80 cm FLX.01-102-101-0800 FLX.01-102-102-0800 — 25.99 €
120 cm FLX.01-102-101-1200 FLX.01-102-102-1200 — 29.99 €
Toile
t
LENGTHARTICLE NUMBER
PRICE*G3/8"–G3/8" G3/8"–G1/2" G1/2"–G1/2"
40 cm FLX.01-102-131-0400 FLX.01-102-132-0400 FLX.01-102-152-0400 22.99 €
60 cm FLX.01-102-131-0600 FLX.01-102-132-0600 FLX.01-102-152-0600 22.99 €
80 cm FLX.01-102-131-0800 FLX.01-102-132-0800 FLX.01-102-152-0800 25.99 €
120 cm FLX.01-102-131-1200 FLX.01-102-132-1200 — 29.99 €
200 cm FLX.01-102-131-2000 FLX.01-102-132-2000 — 37.99 €
* Given end prices are recommended and with VAT for 1 piece.
Washing machine and dishwasher
Gas Standard
Was
hing
m
achi
ne,
dish
wash
er LENGTHARTICLE NUMBER
PRICE*G3/4" W–G3/4"
150 cm FLX.01-108-141-1500 37.99 €
200 cm FLX.01-108-141-2000 44.99 €
The only gas hose which is certified for water and gas. If you need a bigger flow of water, use Gas Standard hose, which has cross-section DN12.
Gas
Stan
dard
LENGTHARTICLE NUMBER
PRICE*R1/2"–G1/2" R1/2"–RP1/2" G1/2"–G1/2" R1/2"–G3/4"
50 cm FLX.01-103-105-0500 FLX.01-103-107-0500 FLX.01-103-106-0500 FLX.01-103-108-0500 14.99 €
100 cm FLX.01-103-105-1000 FLX.01-103-107-1000 FLX.01-103-106-1000 FLX.01-103-108-1000 22.99 €
150 cm FLX.01-103-105-1500 FLX.01-103-107-1500 FLX.01-103-106-1500 FLX.01-103-108-1500 29.99 €
200 cm FLX.01-103-105-2000 FLX.01-103-107-2000 FLX.01-103-106-2000 FLX.01-103-108-2000 37.99 €
300 cm FLX.01-103-105-3000 FLX.01-103-107-3000 FLX.01-103-106-3000 FLX.01-103-108-3000 51.99 €
10 YEAR gUARAnTEE
Diameter DN8 (tap, toilet), DN12 (washing machine and dishwasher, Gas Standard) • certified for water pressure of up to 10 bars (tested to 16 bars) • the hose meets the requirements of norms ČSN EN 10380, ČSN EN 1775, TPG 704 01, ČSN EN 61770 (washing machine and dishwasher)
38 COnnECTiOn SETS 39COnnECTiOn SETS
Connection sets xConnect
PREMIUM SET FOR A BOILER CONNECTION DN16, DN20
Set contents:• pipe with coating DN16, G1/2" (2 pcs)• shrinkable insulating tube (2 pcs)• nuts DN16, G3/4" (2 pcs)• locking ring DN16 (2 pcs)• water O-ring (drinking, heating, for solar
systems) DN16 (4 pcs)• nipple DN16, R1/2" (2 pcs)• flat gasket 1/2" (2 pcs)
• pipe with coating DN20, G3/4" (2 pcs)• shrinkable insulating tube (2 pcs)• nuts DN20, G1" (2 pcs)• locking ring DN20 (2 pcs)• O-ring water (drinking, heating, for solar
systems) DN20 (4 pcs)• nipple DN20, R3/4" (2 pcs)• flat gasket 3/4" (2 pcs)
LENGTH ARTICLE NUM. PRICE*
500 mm FLX.03-015-015 134.99 €
AQUA SET FOR TAP WATER CONNECTION
Set contents:• connection hoses Aqua, DN8,
G3/8"–M10×1 L (2 pcs)• angle regulation valve SCHELL COMFORT,
DN15, G1/2" AG × DN10 G3/8" AG (2 pcs)
LENGTH ARTICLE NUM. PRICE*
400 mm FLX.01-010-101 48.99 €
VERSATiLE FOR WATER,
HEATing, gASAppliance connection easily and quicklyNew connection sets xConnect Premium increase the connection safety and make the installation easier. On the appliance side they are provided with a welded nipple from production and on the other side they allow a short and easy connection without the use of tools with the help of System O.
* Given end prices are recommended and with VAT for 1 piece.
FOR WATER
NEW
40 COnnECTiOn SETS 41COnnECTiOn SETS
LENGTH ARTICLE NUMBER PRICE*
500 mm FLX.03-015-011 59.99 €
1000 mm FLX.03-015-012 66.99 €
LENGTH ARTICLE NUM. PRICE*
500 mm FLX.03-015-013 73.99 €
1000 mm FLX.03-015-014 81.99 €
LENGTH ARTICLE NUM. PRICE*
400 mm FLX.03-015-001 29.99 €
800 mm FLX.03-015-002 33.99 €
LENGTH ARTICLE NUM. PRICE*
400 mm FLX.03-015-006 37.99 €
800 mm FLX.03-015-007 40.99 €
xConnect connection sets
VERSATILE SETPREMIUM DN16
Set contents:• pipe with coating DN16, G1/2" (2 pcs)• shrinkable insulating tube (2 pcs)• nuts DN16, G3/4" (2 pcs)• locking ring DN16 (2 pcs)• O-ring water (drinking, heating, for solar
systems) DN16 (4 pcs)• nipple DN16, R1/2" (2 pcs)• flat gasket 1/2" (2 pcs)
VERSATILE SETPREMIUM DN20
Set contents:• pipe with coating DN20, G3/4" (2 pcs)• shrinkable insulating tube (2 pcs)• nuts DN20, G1" (2 pcs)• locking ring DN20 (2 pcs)• O-ring water (drinking, heating, for solar
systems) DN20 (4 pcs)• nipple DN20, R3/4" (2 pcs)• flat gasket 3/4" (2 pcs)
VERSATiLE FOR WATER,
HEATing, gAS
VERSATiLE FOR WATER, gAS,
HEATing
VERSATiLE FOR WATER, gAS,
HEATing
VERSATiLE FOR WATER, gAS,
HEATing
VERSATILE SETSTANDARD DN12
Set contents:• pipe with coating DN12, G1/2"–G1/2" (2 pcs)• flat gasket DN12 (4 pcs)
VERSATILE SETSTANDARD DN16
Set contents:• pipe with coating DN16, G3/4"–G3/4" (2 pcs)• flat gasket DN16 (4 pcs)
For a quicker job, use our O-ring fitter.* Given end prices are recommended and with VAT for 1 piece.
42 PiPing FOR FiRE SPRinKLER SYSTEMS
PIPE DN23 FOR FIRE SPRINKLER SYSTEMS
ACCESSORIES
DESCRIPTION ARTICLE NUM. PRICE**
Nut O&T G1" for DN23 pipe (Packed with 10 pcs) FLX.14-040-106 2.29 €
Flat gasket T 1" 30/23 × 3 (Packed with 50 pcs) FLX.15-021-045 0.20 €
Screw coupling reduced T G1"–R1" (Packed with 5 pcs) FLX.14-040-354 5.39 €
Nipple 370 Rp1⁄2" cast-iron (flat) Zn FLX.15-011-093 3.19 €
Bearing plate SP1 FLX.14-080-007 2.29 €
Locking clamp SP10 FLX.14-080-008 0.89 €
xConnect piping System for fire sprinkler device
Reliable, functional and effective.Connect fire sprinkler systems with pipes Flexira xConnect and eliminate the possibility of a fire spreading to the minimum.
Flexira always brings more than just the standard— Ing. Petr Pokorny, the owner of Flexira
Flexira xConnect brings the solution of making house distribution quicker, with better quality and more comfortably. The history of the company reaches to 1993 when Petr Pokorny founded a business, which later in the 90s built its own production factory with construction and later with development. People in Flexira adapt products with empathy, to the needs of customers and discover new ways of how to do things better.
* Given end prices are recommended with VAT for 1 m.** Given end prices are recommended with VAT for 1 piece.
LENGTH ARTICLE NUMBER PRICE/m* PRICE**
30 m FLX.14-002-916-0003 11,33 € 339,99 €
60 m FLX.14-002-916-0006 11,33 € 679,99 €
© AZ-Pokorny Trade, s. r. o. Right for printing errors reserved. Some pictures can only be for illustration. 3003-EN-2016-02 Art. No.: 80-203-102
AZ-Pokorny Trade, s. r. o. 671 73 Cermakovice 20 Czech RepublicT: +420 778 760 760E: [email protected]