XCARRIER PRINTING SETUP - Honeywell PRINTING SETUP. ... •Double-click the shortcut of...
Transcript of XCARRIER PRINTING SETUP - Honeywell PRINTING SETUP. ... •Double-click the shortcut of...
Downloading and installing the print programXCARRIER PRINTING SETUP
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Overview1
• Honeywell has developed a new print solution that will eliminate suppliers
having to configure their browsers to use ActiveX components.
• Honeywell is doing this to simplify and reduce the steps needed for our
suppliers to configure their PC in order to ship to Honeywell.
• The slides that follow will help you uninstall the old printer setup program
and download and install the new printer setup program.
• You will need administrative privileges to perform some of these
steps.
• The free Adobe PDF Reader program will need to be installed prior to
this installation in order for the Honeywell print program to operate.
properly.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
New Honeywell xCarrier users
2
• If you have NEVER shipped to Honeywell using the Honeywell portal and
the xCarrier shipping solution then skip to slide 5
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Existing Honeywell xCarrier users
3
• Uninstall the old version if you shipped to Honeywell using the Honeywell portal
before.
• Follow these instructions starting on this slide to uninstall the existing print setup
program that you have installed on your PC.
• First we need to uninstall the old program
1. Click your Windows ‘Start’ button
2. In the program search field type
a. programs and features
3. Click on the ‘Programs and Features’
link.
1
2
3
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Uninstalling the old print setup program
4
1. Search for and click on (highlight) ECS_DIRECT_PRINT_SETUP
2. Click on ‘Uninstall’
- Follow the instructions to uninstall the program.
1
2
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Downloading the NEW print setup program
5
• First you will need to download a ZIP file from the Honeywell portal.
1. Log into the portal and click on the ‘Docs’ link.
2. Click on the ‘Shipping’ folder.
1
2
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Downloading the NEW print setup program
6
1. Look for and double-click on the ECS_PrintServer.zip file.
2. Download the latest version. (V1.1.0 as of 3/1/2018)
3. Click ‘Open’
1
2
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Installing the NEW print setup program
7
1. Double-click the ECS_PrintServer.msi file
2. Click the ‘Run’ button
2
1
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Installing the NEW print setup program (continued)
8
1. Click the ‘Next’ button
2. Click the ‘Next’ button
1
2
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Installing the NEW print setup program (continued)
9
1. Click the ‘Next’ button and the program installation will begin.
2. When the installation is complete, click the ‘Close’ button to finish.
1
2
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Changing the program to run as Administrator
1. Use Windows Explorer to open the ‘C:\Program Files (x86)\Processweaver
Inc\ECS_PrintServer1.0.8’ folder.
2. Right-click on the file ECS_PrintServer.exe file
3. Select ‘Properties’.
Installing the NEW print setup program (continued)
10
1
2
3
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
Installing the NEW print setup program (continued)
11
Changing the program to run as Administrator
1. Click on the ‘Compatibility’ tab.
2. Put a Check Mark in ‘Run this program as administrator’.
3. Click ‘Apply’.
1
2
3
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
12
Printer Configuration Section
• Double-click the shortcut of ECS_PrintServer which is displayed on the
desktop. Do this just once!
• Later after you logoff or reboot your PC, the program will start automatically
when you log into your PC.
• The application will run in the taskbar as shown in the below figure.
• You will now configure your printers.
• Steps:
1. Right-click on ECS_PrintServer in system tray (lower right-hand corner of your desktop).
2. Click on “Printer Configuration” to configure your printer/s.
2
1
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
13
Printer Configuration (continued)
1. Select your Label Printer from the drop down list **
2. Select your Laser Printer from the drop down list **
3. Confirm or enter the path of your Adobe PDF Reader executable.
(PDF Reader must be installed on your system)
4. Click “Save” to save the changes.
**Note: If you want to print your labels on your laser printer, you can pick your laser
printer for both label and laser printer.
1
2
3
4
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
14
Printer Configuration (continued)
Log into the Honeywell Portal and go to the shipping screen
1. On the Shipping Screen, click on the ‘Printer Setup’ button
2. Put a check mark for Labels, BOL, and ASN only!
The Packing Slip and Commercial Invoice are not needed.
3. Click “Save” to save the changes.
Your are ready to begin shipping!
1
2
3
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
15
Shipping with the new program (What to expect)
1. After clicking on the ‘Ship’ button a new tab will briefly open up in
your browser with a ‘Print’ button. This is normal. Do not click
anything and the window will disappear after a couple of
seconds.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
16
Troubleshooting the new program
• If you do not get any printouts,
check that the
ECS_Printserver program is
running. Refer to Slide 12.
• If the program is not running
you can double-click the
shortcut on your desktop
• or click on the Windows ‘Start’
button, click ‘All Programs’,
click on the ‘Startup’ Folder. In
this folder you can click on the
ECS_Printserver program to
start it.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
17
Troubleshooting (Continued)
• Problem: The BOL document or Pack List will not print
• Solution: Increase the wait time that Adobe PDF stays open.
- Right-click on ECS_PrintServer in system tray. Click on “Printer Configuration”
- Change the Adobe PDF close time to 5000.
- Click ‘Save’
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
18
Troubleshooting (Continued)
• Problem: Pop-up with error ‘Exception to start server: Failed to listen on
Prefix ‘http://127.0.0.1:2028/’ because it conflicts with an existing
registration on the machine.
• Solution: DO NOT double-click the shortcut of ECS_PrintServer which is
displayed on the desktop if the program is already running.
• The program is set to start automatically when you log into your PC.
• If you double-click the shortcut, and the program is already running, you will
get a pop-up. (See below)
• Just click ‘Ok’ and then click ‘Close Program’.
• Proceed to ship as normal.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
19
Troubleshooting (Continued)
• Problem: New tab or window pops-up with thousands of characters and no
printing occurs.
• Solution: We have seen this with users running Internet Explorer 8 or 9
- If you are running IE 8 or 9 then you need to add some settings to IE
- Go to Internet Options \ Security Tab \ Trusted Sites \ Custom Level
- Scroll down the ‘Miscellaneous’ section
- Change ‘Access data sources across domains’ to Enable
- Scroll down to the Scripting section and mark all the entries as Enable.
- Click ‘OK’ , Click ‘Ok’
- Restart Internet Explorer
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
20
Troubleshooting (Continued)
• Problem: Getting an error “Can’t create the key” when the
ECS_PrintServer tries to start and then a pop-up with a message:
ECS_PrintServer has stopped working.
• Solution:
- Contact your PC Support and have them follow the following
instructions.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
21
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer
tries to start and then a pop-up with a message:
ECS_PrintServer has stopped working.
• Solution:
- Contact your PC Support and have them follow these instructions.
Default permissions for the MachineKeys folders
Summary
The ECS_PrintServer program uses a Microsoft MAKECERT command to create
certificates that are stored in the MachineKeys folder. If the program cannot
access this folder you will see an "Access Denied" error when the program
starts.
The MachineKeys folder stores certificate pair keys for both the computer and
users. Both Certificate services and Internet Explorer use this folder. The default
permissions on the folder may be misleading when you attempt to determine the
minimum permissions that are necessary for proper installation and the accessing
of certificates.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
22
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Default permissions for the MachineKeys foldersMore Information
The MachineKeys folder is located under the
All Users Profile\Application Data\Microsoft\Crypto\RSA folder.
In a clean installation of Windows 7 you can find it under
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
In newer versions of Windows, try:
%SystemDrive%\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys
If the administrator did not set the folder to the minimum level, a user may receive
the "Failed to Generate Certificate Request" or "Access Denied" or "Internal
Server Error: The Private Key that you are importing might require a cryptographic
service provider that is not installed on your system" error messages when the
user generates a server certificate by using Microsoft Internet Information Server
(IIS).
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
23
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Default permissions for the MachineKeys foldersThe following settings are the default permissions for the MachineKeys folder:
• Administrators (Full Control) This folder only
• Everyone (Special) This folder only
To view the special permissions for the Everyone group, right-click
the MachineKeys folder, click Advanced on the Security tab, and then click
View/Edit.
The permissions consist of the following permissions:
• List Folder/Read Data
• Read Attributes
• Read Extended Attributes
• Create Files/Write Data
• Create Folders/Append Data
• Write Attributes
• Write Extended Attributes
• Read Permissions
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
24
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Default permissions for the MachineKeys folders
Select the Reset Permissions on all Child objects and enable propagation of
inheritable permissions check box. The administrator does not have full control
on child objects to protect a user's private part of the key pair. However, the
administrator can still delete certificates for a user.
The following slides will show screen shots from a Windows 7 PC.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
25
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
26
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
27
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.
Honeywell Confidential © 2016 by Honeywell International Inc. All rights reserved.
28
Troubleshooting (Continued)
• Problem: Getting a ‘Can’t create the key’ error when the ECS_PrintServer tries to
start and then a pop-up with a message: ECS_PrintServer has stopped working.