xa.yimg.comxa.yimg.com/.../21864811/1958259328/name/COMPANY+… · Web viewResponsible for body...

Light and Heavy Industry Design & Services

COMPANY PROFILE

Company Name: SPHEREtech Industries Your GREEN ECO-Friendly Company

Office Address: No. 792 San Jose St. Manuyo 1 Las Piñas City, Metro Manila, Philippines Telefax: (632) 824-38-74 Cp. No.: Smart-09499196152 / SUN +639328779615 Globe-09155877997 / SUN +639333354190 Email Address: [email protected] Google Search: www.spheretechindustries.besaba.com

Fabrication Office: AMDP CONTROLS SALES & SERVICES Blk. 1 Lot 9 President Aguinaldo Avenue, Malacaňang Village, Paraňaque City

Tel. No. (632) 824-38-74/546-52-37

Law Office: ARQUILLO, DELA CRUZ & ALBAO LAW OFFICES Suite 606 Don Santiago Bldg. 1344 taft Avenue, Ermita Z-1000 Manila, Philippines

Tel: 02-523-92-31 E-mail: [email protected] C-phone: 09215503505

DTI Registration Cert. No.: 01497729/Date Registered: Sept. 05, 2011

VAT/TIN No.: 204-126-579-000

SPHEREtech Industries your GREEN ECO-FRIENDLY company that designes, organizes, and custom built primarily to serve and offer industrial products such as air compressors, air dryers, industrial filters, High Density Flood And Or Sea Waste Water Recovery Filtration System to produce a Highly Alkaline Energized & Ionized Potable (100% Drinking & cooking Water) fully automated.

The company is built with only a single purpose in mind: Give The Customer Total Satisfaction With Our Quality Service with our friendly and dependable employees!

SPHEREtech Industries

792 San Jose St. Manuyo 1 Las Piňas City Tel. No.: (632) Email: [email protected]

SPHEREtech

Industries

mailto:[email protected]



CLEAN POWER SOURCE SYSTEM: 1. HYDRO POWER ENERGY

We at SPHEREtech Industries, your GREEN ECO-FRIENDLY company have been exploring alternative POWER SOURCES with ELECTRICAL OUTPUT from 1 MEGA WATTS expandable to 5 MEGAWATTS.

We use only WATER as the main source of material VERY MINIMAL STORAGE CAPACITY.

NO AIR POLLUTION! NO NOISE POLLUTION! NO MORE DIESEL ENGINES!NO MORE FUEL NEEDED! NO MORE EXPENSIVE ELECTRIC BILLINGS!NO MORE POWER OUTAGES!

WE CREATE MORE JOBS FOR OUR COUNTRYMEN HERE IN THE PHILIPPINES AND SOON ABROAD!

WE CREATE OTHER BUSINESSES USING THIS TECHNOLOGY!

2. Waste Water Refraction and Management Consultancy,Build machineries for this project for distribution global wide.

Another product line we have is our 3. HIGH DENSITY FLOOD, SEA, WATER AND WASTE WATER RECOVERY &

FILTRATION SYSTEM. From this system, we can produce an output from 660,000 liters of ALKALINE ENERGIZED & IONIZED WATER per day minimum up to what is required by our client.

WE DESIGN, CUSTOMIZED, FABRICATE, INSTALLATION, and MAINTAIN this system.

Product lines such as thermal insulation materials, rubber products, industrial hoses and mill supplies for manufacturing, mining, textile, semiconductor, electronics, FMC – waste food recovery system fully automated, steel, shipbuilding, construction, chemical and power generation and petroleum industries, at par with the required international standards. It also offers after-sales service for air compressors of any brand as well as air conditioning units, and also offers automation controls machine services.



THE COMPANY PRODUCT LINES & SERVICES CAPABILITIES

Design, Estimate, Installation and Commissioning of Electro-Mechanical, Construction and Maintenance Projects for the Manufacturing, Industrial, Commercial and all other sectors of society.

Operation and all types of Maintenance Management of Rotating Machineries and Equipment such as Predictive, Preventive, Corrective/Improvement and on-call Troubleshooting and Repairs’ for the following:

1. Design, Fabricate & Installation of our HYDRO POWER ENERGY SYSTEM for your Company needs. Producing 1 MEGAWATTS up to 5 MEGAWATTS of Electricity.

2. Design, Fabrication, and Installation of our GREEN ECO – FRIENDLY High Density Flood, Sea & Waste Water to Alkaline Energized & Ionized Potable Filtration System.

3. Air Conditioning System Such as Package, Split and Window-type units and all accessories such as Air Handling Units, Fan Coil Units, Condensers, Evaporators, Compressors, Blowers, Fans, Pumps, Piping System and Controls, etc.

4. INTER-COOLER SPECIALIST FOR OIL FREE AIR COMPRESSORS ALL BRAND NO REPAIRS LOCAL DESIGN ASSEMBLY WITH WARRANTY AS PER SAMPLE.

5. (Full Automation) PLC-Installation, Programming and Troubleshooting.

6. Hard Wiring Installation, Troubleshooting of any kind Machine Controls.

7. Switchgear (ATS) of Power Engine Generator Installation and Troubleshooting.

8. Motor Rewinding three phase single phase ac/dc, up to 500Hp.

9. All kinds of Screw & Piston Type Air Compressor’s Repair/Overhauling/Preventive Maintenance.

10. Cooled Storage System Such as chiller Package, Cooling Tower & Pumps.

11. Boiler System & Piping’s Installation.

12. We Also Design of All Kinds Steel Fabrication & Gears Fabrication.

13. Ducting System Design/Fabrication.

14. Alternative Power Source System



792 San Jose St. Manuyo 1 Las Piňas CityTel. No.: (632) Email: [email protected]

Industries


15. All other related rotating machineries and equipment in all sectors of society.


LIST OF PRODUCT LINES

Design, Fabricate & Installation of our HYDRO POWER ENERGY SYSTEM for Your Company needs. Producing 1 MEGAWATTS up to 5 MEGAWATTS EXPANDABLE of Electricity.WE SERVICE & MAINTAIN FOR YOUR COMPANIES SUCH AS:

PROCESSING PLANTS ASSEMBLY PLANTSMANUFACTURING PLANTS PHARMACEUTICAL PLANTS

CALL CENTERS DAIRY PLANTSHOSPITALS FOOD PROCESSING PLANTS

CITIES GARMENT FACTORIESMUNICIPALITIES AIR CRAFT MANUFACTURING PLANTS

RESORTS MILLING PLANTSSHIPPING LINE VESSELS ICE PLANTS

CONDOMINIUM BUILDINGS RADIO & TELEVISION COMPANIESUNIVERSITIES HOTELS

SCHOOLS TELECOMMUNICATION COMPANIESSHOPPING MALLS TELECOM PROVIDERS

AIR PORTS CAR FACTORIESSEA PORTS SEMI-CONDUCTOR FACTORIES

CEMENT PLANTS

Design, Fabrication, and Installation of High Density Flood, Sea & Waste Water Recovery to produce Alkaline Energized & Ionized Potable Filtration System




Industries


AIR COMPRESSORS Design and installation, commissioning, repair, service &(Servicing all brands) maintenance, overhauling, Original Embedded Machines parts (OEM) Replacement Parts Supply. Periodic check-up.

INTERCOOLER SPECIALIST FOR OIL FREE AIR COMPRESSORS ALL BRAND NO REPAIRS LOCAL DESIGN ASSEMBLY WITH WARRANTY AS PER SAMPLE.

DRYERS Desiccant/Refrigerated Air Dryers

COOLERS Oil Coolers & After Coolers, Fabrication and repair

HVAC (Refrigeration Repair & Maintenance, Installation & Air Conditioning)

INSTRUMENTATION Automation/PLC, Wiring Installation, Programming and Supply

INDUSTRIAL FILTERS For air compressor filters (oil separator, oil filters, air filters) Power Generators, Bag HEPA (clean room) Dynacel, Vacuum, Silo, Sandblasting, Powder Coating, Dust Collector, Mist filter

press, Basket Strainer, Roll (washable, disposable) Pocket Wire Cut, Hydraulic, Catalytic Converters, Silencing, Heavy Equipment or any made to order filters.

LUBRICANTS Industrial oils (Compressors oil, semi-synthetic/fully synthetic/mineral)

FOOD PROCESSING & Food packaging and processing machineriesRECOVERY SYSTEM

RUBBER PRODUCTS LOCAL FABRICATION: Molded or extruder rubber (seals, O-rings)

INSULATION MAT’LS Ceramic fiber blanket/board, rock wool, calcium silicate, perlite EXPANSION JOINTS Rubber, metallic or fabric material MOTOR REWINDING Three phase/single phase ac/dc ¼ HP to 500HP GENERATOR Repair / Overhauling / Service etc. CHILLER Repair/Overhauling & Piping’s BOILER Repair/Electrical & Mechanical/Piping’s STEEL All Kinds of Steel Works Fabrication/Gears & Pulley Fabrication DUCTING SYSTEM We Also Offered Ducting Fabrication/Design & Wire Tray

Fabrication

LIST OF CUSTOMER COMPANY ADDRESS CONTACT PERSON

1.) PHIL. BOBBIN CORP. ROSARIO CAVITE ENG’R JASON CALIANGA 2.) UNICORN METAL CORP. KALOOKAN CITY Mr. KIM 3.) SANRITSU SUBIC ENG’R BOBBY 4.) LEAN’S PROCESSING SAN PEDRO LAGUNA ENG’R BOY DE LEON 5.) IMPERIUM INC. MAKATI CITY JELYN QUIJANO 6.) TRIBU INC. TAGUIG CITY TEDDY 7.) PHILUX MUNTINLUPA CITY MARK ICASIANO

Others upon request.


792 San Jose St. Manuyo 1 Laspiňas CityTel. No.: (632) 377-51-55 Email: [email protected]



Company Organizational Chart


SPHEREtechIndustries


OPERATION HEAD

ADMINISTRATIVEMARKETING

HEAD

FINANCE MANAGER

GENERALMANAGER

SPHEREtech

Industries

CHIEF LATHE

CHIEF MECHANIC

CHIEF AUTOMATION

CHIEF FABRICATION PANEL

CHIEF FABRICATIONMACHINE

MAINTENANCE

ELECTRICAL ENG’R

ARCHITECH

OPERATION R&F

LEGAL

HRD

MKTG BUS DEVT MGR

SALES MANAGERS

SALES TRAINORS SUPERVISORS

SALES FORCE

TELESALES FORCE

SECURITY

PURCHASING

COMMUNITY RELATIONS

DRIVERS

OFFICE STAFF

UTILITY

ACCOUNTING

WAREHOUSE

LOGISTICS

BANKING

INVESTMENTS



THE SPHEREtech Industries HEADS

LEGASPI MACAS MALASABAS General Manager

Having 16 solid years in the field of electrical, mechanical, full automation and designing specificities as required by clients for their factories, plants, assembly car plants, shipping, power industry plants, company fire alarm and security systems.

Finish his educational attainment: College : A.I.T Agusan Institute of Technology Secondary : Tubay Newly Nationalize High School 1989 – 1993 Primary : Tubay Central Elementary School 1983 – 1989

Accumulated all the knowledge in these field and through company training and experienced, he has mastered his craft, delivered his work assignments as to what is expected from him to wit gained the trust and confidence of his fellow engineers and bosses.

Became one of the outstanding team leader in projects like NAPOCOR – Bicol Region 5,

Accomplished his project in full automation of the TOYOTA car assembly plant in Sta. Rosa, Laguna

Successfully, he rehabilitated GOODYEAR Philippines, in Las Piňas City, their manufacturing plant with updating its complete automation system

Company: NESTLE CAGAYAN DE ORO CITY Project: Automation control logix AB Performs: Wiring installation of PLC AB and mounting other electronics control device

Company: NESTLE LIPA BATANGAS CITY Project: Automation control logix AB Performs: 5 new control panel, wiring installation of PLC AB, mounting of 5 SMC soft

starter, 4 AB 1336 inverter motor drives, 12 danfoss inverter motor drives and other electronics control device.

Company: CMC UNILEVER LASPIÑAS CITY Project: Automation control of knorr cubes machine Performs: Wiring installation of PLC omron brand, sensors and PLC programming.

Company: CMC UNILEVER LAS PIÑAS CITY Project: Automation control of conveyor w/ servo motor


SPHEREtechIndustries


Industries


Performs: Wiring installation of PLC festo and servo amplifier

JAD Group Of Companies Inc. (An affiliate of Johnson & Johnson Philippines)Sanford Complex Km. 14 Leviste Ave.Bo. Ibayo Paranaque, Metro ManilaFrom April 2 1997- date separated June 28 2004.

Job Description: MAINTENANCE HEADReports to the Engineering Department Head.

Automation or PLC Control Technician, Air-conditioning Technician, Basic Welder, Experience Industrial Electronics, Experience Computer Tech., Hard wiring control panel for industrial, Tool keeper.

Coordinates with process and /or projects engineer in the installation and maintenance of electrical wiring, fixtures, apparatus, and control equipment.

Advice directives for modifications on equipment and carries out its installation to minimize waste of materials.

Provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications.

Installs control and distribution apparatus such as switches, relays, sensors, inverters, dc motor control, soft starter, wye-delta, reverse forward motor connections, hoist, temperature controls, circuit-breaker panels/lightings & other electronic control devices.

Test continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as digital multi-tester, clamp meter, and ohmmeter.

Observes proper functions of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.

Repairs faulty electrical equipment or system. Promotes cleanliness and orderliness in the line and work area. Implements GMP-GHK (ISO2000).

Career Highlights / Accomplishment:

Gained knowledge in PLC Allen Bradley slc 500/ 600, Omron installation & programming. Helped in reduction of waste through installation of electrical sensors and automation. Has been able to modify switches and wirings when the needed parts are unavailable. Gained knowledge in SERVO Control Motor Parameter Programming. Helped in the Safety program by installing Machine Guarding Safety switches. Provides maintenance on electrical motors up to 320 hp. Gained knowledge in operation and basic maintenance of ATLAS COPCO air compressor

units (up to 320 cubic foot meter) Troubleshoots, repair, & installs pneumatic solenoids valves (Festo & Air Tac units) Gained knowledge in the maintenance and trouble shooting of Hot melts units

(Nordson, Meltex ) Gained knowledge in maintenance and troubleshooting of temperature controllers

(eurotherm & Omron Units) Performed maintenance on Chiller Unit (50 Tonner) and diagnosed specific malfunctions

in the system. Performed installation of Allen Bradley 1336 AC motor control drive. Performed troubleshooting of Electrical Wiring of Panel Control of Oil-fired Boiler

(Rating: 50 horse power)


Performed operation and maintenance of Generator set unit Perkins brand ( rating: 325 kilo volt ampere )

Used skills in Oxy-Acetylene cutting & brazing operations in repairing damaged parts of machine when the assigned personnel are not available.

Lead - Building Electrician Classic Builders Corporation 1996 - 1997.

Job Description: Reports to Building Electrical Engineer Performs substituted supervisory functions such as delegating and supervising work of

15 electricians. Performs electrical wiring layout & troubleshooting. Performs installation of meter base. Performs Air-conditioning unit installation and troubleshooting.

Apprentice - Building Electrician Power Factor Company 1995Job Description: Performs electrical wiring layout & troubleshooting

Machine operator Standard Container Corp., (Paint Can Manufacturer) 1994Job Description: Tasked with operating Paint Can Fabricating Machine

MILES MARTINEZ ALCANTARA, JR. Operation Head The company is built with only a single purpose in mind: Give The Customer Total Satisfaction With Our Quality Service with our friendly and dependable employees!

Hard work, innovational approaches, excellent camaraderie and dedication has been the flames of his mighty heart for the designation given by him. Having the inspiration of his family, he gave his utmost service to his position, delivering the best results, and with satisfactory resolutions as per case of work load arises. “Mighty Might” we call him because there is no job too big for him unresolved. With his charisma, and honest opinions have made him the best man for the job.

Company Name: Business Care Enterprises

Position: Project Engineer, Salesman (2000- up to present)

Project Engineer Responsible for developing project objectives by reviewing project proposals and plans;

conferring with management. Determines project responsibilities by identifying project phases and elements; assigning

personnel to phases and elements; reviewing bids from contractors. Determines project specifications by studying product design, customer requirements, and

performance standards; completing technical studies; preparing cost estimates. Confirms product performance by designing and conducting tests. Determines project schedule by studying project plan and specifications; calculating time

requirements; sequencing project elements. Maintains project schedule by monitoring project progress; coordinating activities; resolving

problems. Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.

Controls project costs by approving expenditures; administering contractor contracts. Prepares project status reports by collecting, analyzing, and summarizing information and

trends; recommending actions. Contributes to team effort by accomplishing related results as needed.

Salesman Responsible for assuring to get a project for the company. Selling items like :generator, screw compressor, PLC controls, generators, air dryer, centralized

air conditioning, motor rewinding, motors etc,

Company Name: Z-WILLS Container Services. Position: Owner/ Manager (1996-2000) Responsible for body repair, car painting, light to heavy trucks, overhaul engines,

electrical wirings, jeep body design, assemble, repair container van (20 ft.-40 ft.), home service (if required).

Company Name: AL RAWAN Establishment UAE Position: Mechanical Engineer (1995-1996) Responsible for repair, assemble in air conditioning, boiler, hydraulics unit.

Company Name: Z-WILLS Container Services. Position: Owner/ Manager (1981-1994) Responsible for body repair, car painting, light to heavy trucks, overhaul engines,

electrical wirings, jeep body design, assemble, repair container van (20 ft.-40 ft.), home service (if required).

Company Name: Roan SA Corporation


Position: Mechanical Engineer (1979-1981) Responsible for discussing and solving complex problems with manufacturing

departments, sub-contractors, suppliers and customers; recommending modifications following prototype test results; considering the implications of issues such as cost, safety and time constraints; working with other professionals, within and outside the engineering specialism; monitoring and commissioning plant and systems.

Company Name: Santander Construction

Position: Heavy equipment mechanic (1977-1978) Responsible for diagnose and troubleshoot malfunctions in every equipment using computerize

and other testing paraphernalia. Test repaired equipment to ensure proper performance when used. Perform proper maintenance of the equipment; clean and lubricate. Train new workers in performing equipment inspection, repair and preventive maintenance. Inventory and order fuels and other supplies. Perform other related jobs

Educational Attainment:

Tertiary

Bachelor of Science in Electrical Engineering

1980-1981: Central Colleges of the Philippines Aurora Blvd. Quezon City

Bachelor of Science in Mechanical Engineering

1972-1978: Central Colleges of the Philippines Aurora Blvd. Quezon City

Secondary Education

1968-1972: St. Martin Technical Institute Escarpment Road Pasig city

Intermediate Level1962-1968: Pio Del Pilar Elementary School Poresa St. Sta. Mesa Manila

MAR FRANCIS T. BONTIGAO Administrative Marketing Head


There are several solid and strong points in the field of Marketing where I can share with the Corporation. More than 20 years in this field, from MANCOM core planning, its implementation, and back tract analysis, satisfactorily achieving the forecasted targets based on the day to day inputs from the data base per divisions’ targets versus actual reports. Enjoyed several stints in the Marketing Industry, and have achieved from 50% upon takeover increasing its input of 125% net of its dictated results where the management never knew how it can be activated through their present market contacts and creation of their new line of the market segment. Diversifying the collections and affiliations via banking accreditation maximizing all services and its potential to increase profit where it states the bottom line.

Personalized servicing to small, medium, and plant scale developmental build up requirements of client-market plant production base on a wider usage of the machineries potential upgrades and innovation.

Project Management Office establishing the direct monitoring of the operations of all corporate activities,

Direct Acquisition – Purchasing of all Stocks required pre project either local or abroad to facilitate inventories, deliveries of actual designed machineries as customized for the intended project specification, eg.: Cummins Diesel, Komatsu, Ingersoll Rand, Caterpillar, Airman to name a few.

Collections of Sales from serviced customers on contract based via banking services as stipulated on contract basis, Data Information Clientele. – Government and private clients served as part of After Sales.

Advertising campaign as one of the solid support for the company’s drive and has gain solid public awareness and increased sales output from 85% or Php25 Million to 250% or Php85 Million by the end of 2010, from community relations serving several areas were directly appreciated by the community residence and gave an edge when it comes to immediate services that we can render. Information Drive like Brochures, Corporate Presentation reports using Power point, Excel, Windows 7 application.

And website establishing from accredited providers to legitimized service for all clients requirements with corresponding Customer Sales – Telemarketing operations which is conducted daily via office operation. This has enabled the clients direct link to the company, thus getting additional sales in terms of services and sales, supported by quarterly program and incentive schemes as part of enhancing selling output and rewarding sales agents based on their monthly, quarterly, and annually performance delivery.

Observation of Plant Operation on Zero Accident and Safety First procedurals, as priority of the plants, offices Customer Direct Service ON CALL for Solutions Application for immediate operations

Directly affiliated with the international banking / trading sectors / catering to the international investors’ side via online investment packages designed and tailor made to fit their desired quality and quantity of projects for their perusal whose potential is from US$2.5Million up to US$25 Million gross monthly to annually having the right connections established for the projects intentions.

Covered High end and mid-rise condominium units, and their housing projects, where situations are of the same without any changes that can maximize their sales inputs, traditionally following pipelines without any intentions for the middleclass markets potential. This is a much diversified contract projects if given the right attention and properly calibrated strategies’ to be implemented. Where each developer has their own banking facilities neither as flexible nor appealing to the investors and buyers.

Tried up scaling approach through its market niche A & B but does not fit due to the traditional safety nets set by the traditional heads of each corporation.


Handled 12 Sales Executives each with average quota of Php50Million each and attained at 100% yearly

District Senior Sales Manager Zammer Sales Distribution1994 to 1997

National Capital Region – distribution operations of a bulk order monthly amounting to Php3.5Million and exceeded to an amount of Php5.7Million,

training of medical representative personnel, market niche, monitoring, warehousing operations, delivery, and quality control, all over the Philippine Archipelago.

Formulate & implement a cost based cargo handling tariffs, Develop & implement a pro-active access control and traffic of

distribution management.

Customer Service AgentSNAS – DHL Alkhobar, KSA 1993 to 1994

International Training operations in Bahrain for freight forwarding, conducted in Holiday Inn, safety measures and accident preventive trainings – close quarter’s facilitation.

FIRST – IN, FIRST - OUT (FIFO) system of service for the cargo of 50,000 tons weekly to and from its origin and destination, facilitated by International tracking system.

Establish & Implement International standards sanitation system involving the hub users and other environmental protection and beautification projects.

Finalize and implement general rules and regulations of the hub.

General Manager-Processed Meat Distribution1991 to 1993 Metro Manila

Ventured to Meat Business distribution in house-hold direct sales, small and medium size distribution outlets for the processed meat products of all brands, catering to Metro Manila markets only.

Catered to 100 restaurants in terms of choice cuts / prime cuts / and daily delicatessen requisites.

Territory Manager Mead Johnson Philippines1990 to 1991

Region 8 designation of operation for the direct promotion, distribution, sales, zero error risk preventive and backlog monitoring clinics. Conduct Analytical clinician statistics studies based on the data and the nutritional demand of the market niche distribution.

Catered to 10 government hospitals, 30 private hospitals, 300 clinics, 300 midwives with respective clinics in the area, 80 main department stores, general stores, groceries, supermarkets, 500 drug stores, and small sari-sari stores in the region.

Covered their requirements of Infant formulas, nutritional follow-on formulas, prescriptive and none-prescriptive medicines.

Direct contract arrangement as per requirement of clientele specified in the contract with corresponding additional billing subjective of any further arrangement as advance settlement.

Before takeover of the area, 57% delivery was the highest made and has increased the potential income to 250% covered only in 6 months.


EDUCATIONAL BACKGROUND: Bachelor of Science in Business Administration Graduate 1986 to 1990

Adamson University, Manila, PhilippinesStudent Adviser – Marketing &Management Students Society Organization

COBOL Computer Programming Graduate 1982 to 1983 Program AnalysisANSCORP. Rufino Towers, Ayala Avenue, Makati, City

Sta. Clara Parish School Graduate 1978 to 1982 Pasay City, PhilippinesTreasurer – Natural Science Society / Treasurer – Mathematics SocietySecretary – Parish Choir / Vice- President - Don Bosco Youth Council & Choir


RAMON SANTOS VICENTE CHEMIST CONSULTANT

We are proud and humbled by this soft spoken gentleman as our BLACK BELT of the team in terms of his unmatched performance in the field of CHEMISTRY for 38 years. From the helm of MIT Mapua Institute of Technology 1973 he took his licensure on October 1, 1974 earning his License Reg. No. 4152. Blessed in life of his better half Rosemarie Romero Manahan and with 5 wonderful children, Ramon Jr., Rafael, Ronald Allan, Remont Francis, and Rachelle Christine.

WORK EXPERIENCE:Jan 2012 to Present Sales & Technical Consultant Shinco Technique Inc.

Training of Sales Personnel Design of system seminars on Water & Waste Water System Conduct seminars on Facilities Engineering Maintenance

Jan 2011 to Present Technical Consultant Advantech Global Design & Technical Seminars on Industrial Water Treatment

System

Jan 2010 to Present Technical Consultant Milestones Water Industries Design of Water & Waste Water Treatment Systems Training of Technical Personnel for operation & maintenance

2008 to Present President FMV & Associates Consulting

Oct. 2008 to Dec. 2009 Manufacturing Manager Innobev Inc toll Manufacturer for Del Monte

Philippines FIT & RITE

Oct. 2004 to Aug. 2007 Consultant San Miguel CorporationSan Miguel Ave. Pasig, MM

May 2004 to Present President CEO Pest Attack Management System

Inc. (PAMSI), San Pedro Laguna

Aug. 2003 to Present President CEO Golden Paradigm, Paco Manila Water & Waste Water Treatment

Feb. 2002 to Oct. 2006 Technical Consultant Optodev (Essilor) LIIP, Mamplasan

Water & Waste Water Treatment Water Treatment System Reverse Osmosis System Mariveles, Bataan

Jun 2001 to Oct. 2009 Technical Consultant Yama Water Corporation, Paco Manila

Jan 2002 to Present Design Consultant JBC Engineering, Paranaque Water & Waste Water

2000 to Jun 2001 VP-Technology e-Foods, Paranaque


Business Development for specialty food Custom food Ingredients Formula & Process Development Package & Label Design, Technical Training Liaison, BFAD & other Government

Agencies1998 to 2000 VP-Operations J.H. Fernandez Services Inc.,

Malate, Manila OIC Manufacture, Sales, & distribution of Household consumer

products

Technical Consultant Permatech Industrial, Alabang, Muntinlupa

Design Water & Waste Water Treatment Plants Recommend Systems for Operation Recommend Systems for Productivity Technical Training for Project Management

Technical Consultant Green Coil Industries, Inc., Mandaue, Cebu

Design Tunnel Drying System Plant Layout System Development Productivity Quality Management Information Systems Hardware & Equipment Development Technical Training

Technical Consultant Fravel Foods ProductsSta. Maria, Bulacan

New Product & Process Development Analytical Chemical Micro Biological Testing Quality Control Technical Training

1996 to 1998 President Water Master Technology CorporationMakati, MM

Design of Water Treatment Waste Water Treatment Facilities & Equipment Execution & Installation of Process Water treatment plant for Novell

Food Corporation, LIIP, Laguna Design, Execution, and Installation of Water Treatment Plant for Non-

Wooven Spunbond Company, Silang Cavite Design Waste Water Treatment Plant for Adamson and Adamson, Binan,

Laguna Redesigned, Modified, Waste Water Treatment for RFM Tuna

Corporation, General Santos

Technical Consultant: RFM Food Corporation Pioneer, Pasig

Snacks and Diversified Food Division


Product and Process Development, Productivity and Quality Management training

Technical Consultant Monarch Foods, Pasig MM Product Development, Feasibility Study

1995 to 1996 VP-Operations Milestone Water Industries Inc San Pedro, Laguna

Design, Execute, supervise installation and commissioning of waste water, water treatment facility

Made Presentation for company proposals Represented the company on Public hearings and licensing and

registration requirements of LLDA, DENR, PAB, EMB Conduct Audits Waste Minimization Waste Management Reviews and other quotations Oversee project construction and commissioning

1994 to 1995 Technical Consultant Milestone Water IndustriesParanaque, MM

Design Water and Waste Water Treatment Systems Prepared proposals and quotation Oversea Project construction and commissioning

1992 to 1994 Technical Consultant KRAFT FOODS Inc.Paranaque, MM

Training of Quality Control Personnel Audits Quality Management Documents System for HACCP Trouble Shooting of various product / lines problems

1982 to 1992 Quality Management Manager KRAFT FOODS Inc.Paranaque, MM

Oversees all activities pertaining to product / process quality and integrity

Conducts technical training for key manufacturing personnel and management

Responsible for accurate and timely analytical, physico-chemical, microbiological and organoleptic evaluation and testing of raw materials in process products and finish products

Responsible for product development, shelf life, and market stability for consumer and institutional products

Develops and documents quality systems and disseminates them in training

Liaisons with BFAD on product Licensing with other agencies for external product testing.

Coordinates with other departments regarding product quality, plant upkeep, audits and other technical matters

1980 to 1982 Quality Control Manager San Miguel CorporationSan Fernando Brewery,San Fernando, Pampanga


Responsible for Quality Control and Quality Assurance systems and activities

In charge with the following departments: Analytical Laboratory, ProcessControl, Water Treatment, Micro Laboratory, Waste Water Treatment

Appointed Pollution Control Officer Liaisons with government agencies regarding operations, audits, and

inspections1978 to 1980 Department Head San Miguel Corporation

Quality Control Laboratory San Fernando Beer Bottling Plant, San Matias,

San Fernando, Pampanga Responsible for all activities pertaining to quality control Product inspection and testing Responsible for process control and productivity monitoring operations Conducts training for all product personnel on Good Manufacturing

Practices Responsible for process water treatment, plant sanitation, pest control,

and waste water treatment Designated Pollution Control Officer and Accredited by DENR (NPCC) Liaisons with government agencies for licensing, audits, and inspection Coordinates with other departments and divisions regarding product

quality and productivity Handles product complaints and consumer visitors

1975 to 1978 Chemist San Miguel CorporationPolo Brewery, Valenzuela,Bulacan

Analytical Chemist for Brewing, Storage, Treatment Bottling and bottled products

Conducted Physical, Chemical, Instrumental Analysis and Organoleptic evaluation for in process and finished goods

Analytical Chemist for Raw Materials: Conducted Physical, chemical, instrumental analysis and testing on all raw materials

Evaluated malt yield for brew house extracting efficiencies and blend calculations

Designed a programmable extraction apparatus for malt extract determination

Modified hops extraction evaluation and corresponding brew house extraction program

Microbiologist: Conducted micro biological assessments and evaluation on process, equipment, environment, raw materials, in-process products and finish products

Conducted test, evaluated efficacy of cleaning materials and methods Prepared pure yeast culture for fermenting department and other

Breweries of San Miguel Water Treatment Supervisor: Supervise the production of brewery, its

testing and evaluation Waste Treatment Supervisor: Supervised the operations of waste

treatment plant and analysis and testing of samples from various stages of treatment

Statistical Quality Control: Evaluated quality of products by statistical process control and specification


Evaluated Incoming packaging materials by statistical sampling and inspection

Other Trainings:1. Basic and Advance Pollution Control Management and Waste treatment:

Test Consultants Philippines Dr. Felimon Urierte2. Water and Waste Water Treatment

Degremont, Paris, France3. Instrumental Method of Analysis

PIPAC, Ateneo de Manila4. The Allen Management Program

Louis Allen Associates inc.5. Total Quality Management

Tennessee Associates Philippines6. HACCP

Dr. Donald Corlett Corlett Consulting Services7. Cheese / Salad Dressing Manufacturing & Controls

KRAFT Foods Inc. Melbourne, Victoria, Australia8. Quality Assurance / Statistical Process Control

KRAFT USA Chicago, USA9. Strategic Thinking

KRAFT Inc. Melbourne, Victoria, Australia

Other Proficiencies: Electronics: Analog / Digital Technology Industrial Application & Instrumentation PLC’s & Controls Calibration & Measurements Computer Microsoft Excel, MS Word, Access, Power Point, MS Project, Desk Top Publishing,

other various applications and programming languages Electro Pneumatics / Corrosion Technology Fiberglass Reinforced Plastic Technology


Ma. Teresa Buenafe T. Alcantara MKTG BUS. DEV’T. MANAGER

Executive Summary:

Quality Assurance Specialist with 3+ years’ experience in monitoring calls and evaluating back office processes of agents for different Telstra lines of business. My responsibilities included evaluating and coaching agents, sending daily, weekly and monthly performance reports, Analyzing of reports to identify trends, areas of achievement & development, creating and implementation of quality guidelines and providing suggestions and action plans to clients to improve overall process.

Core Competencies:

Quality Control Process Improvement Project Leadership Strategic Planning Proposal Development Client Relation

Professional Experience and Accomplishments:TELETECH Philippines May 2004 – January 2012 SM Central Business Park, Bay City, Pasay City

Quality Assurance Specialist (Nov 2008 - Jan 2012) Meets evaluation and coaching output targets on a consistent basis Completes assigned reports in a timely manner & ensures accuracy Analyzes reports to identify trends, areas of achievement & development of the whole account Formulate action plans to maintain consistency of program strengths & growth (e.g. participation in the data

generation & analysis, and ceremonies for the Quality Awards) Helps implement Quality Guidelines thru consistent team meetings, coaching sessions, quality discussions,

etc. Participates in client call calibration Handles general administrative duties for the quality department

Accenture Department (Nov 2008-Dec 2009)– Provides regular coaching sessions to assigned agents and attends team meetings to give updates and pointers on how to meet the criteria set by the Quality Team.

Telstra Department (Dec 2009-Jan 2012)- Responsible for monitoring agent calls and back office processes against client specified policies and procedures.- Served as Quality POC for Sales Support (Telstra Mobile, Bigpond, Foxtel and Fixed line), Mobile Number Portability and Telstra Shop Online lines of business.- Created guidelines for A-Team, Error Callback, Retail, Sales Support, and Telstra Shop Online approved by the clients.- Distributes agents to different specialists for weekly quota.- Designs Report Templates using Excel Macros

AchievementsValues in Action Awardee 2011 (3rd Quarter) Best Quality Specialist 2011 Awarded as one of the Top Performers in the Quality Department 2009 - 2010

Technical Support Representative (May 2004 - Nov 2008)

DSL Department – responsible for assisting members with connectivity and application software issues AT&TIS/AT&T Yahoo! related to their computer system and/or its configuration and settings.

Home Networking Department – responsible for assisting the member once a support call has been escalated from Tier1. HN issues are generally network related. Responsible for assisting members with internet connectivity and application software issues related to their computer system and 2wire home portal equipment.


Chronics Department - recognize members who contact repeatedly for assistance. Members may be calling about a recurring problem which can be extremely frustrating or unrelated issues ranging from member education to problems outside the current scope of support. Agent identifies why the member is having problems and ensures the member's issue is resolved and proactively checks for any issues the member might experience in the future. It is the agent's job to own the member, to the extent possible under the current scope of support and to ensure their issues are resolved prior to releasing the call.

Achievements Best in Reliability for 2008 Best Chronics Agent for 2nd Quarter 2007 Certificate of Excellence for Staying in Scope of Support Included in Agent's Wheel of Excellence 2007 TOP 6 Agent for Quality Assurance Month of October 2007 TOP 1 Agent for Quality Assurance Month of April 2007 TOP 5 Agent for Quality Assurance Month of January 2007 TOP 6 Agent for Quality Assurance Month of November 2006 TOP 2 Agent for Quality Assurance Month of October 2006 TOP 7 Agent for Quality Assurance Month of September 2006 TOP 4 Agent for Quality Assurance Month of February 2005 TOP 1 Agent for Quality Assurance Month of June 2004 One of the TOP Customer Service Representatives of Teletech 2004 Representative for STS extend a hand forum Named Teletech’s newspaper “Crickets”

Baron Enterprises March-May 20019507 Taguig St. Makati City

Secretary / Marketing AssistantDUTIES:

Responsible for the day-to-day operations of the corporation like ordering and inventory of stocks.

Coordinates all office workers Assists manager in maintaining up-to-date records Answers incoming customer inquiries. Responsible for answering incoming calls. Committed to meeting the customer needs and provides effective and timely

support in a positive manner.

Training and Seminars Attended:

2012 December Google Analytics2012 December 21 Days to Building a Web Business2011 Six Sigma White Belt Training2011 Managing Process ImprovementsDecember 2010 Word Choice for Coaching FacilitatorsFebruary 2010 S.M.A.R.T. WorkshopJanuary 2010 Critical Thinking Skills for ManagingFebruary 2009 Feedback 101February 2009 PESOS WorkshopFebruary 2009 Goal Setting and Action PlanningApril -July 2007 Xavier Technical Training Center April 11, 2006 Identifying Customer NeedsFebruary 2006 Customer Self Install and Chronics TrainingNovember 28, 2005 Improving Customer ExperienceNovember 28, 2005 Agent Confidence TrainingAugust 23-24, 2005 Home Networking TrainingMay 2004 Accenture Product TrainingMay 2004 Accent Neutralization Training (Accent and Conversational English)


Educational Background:

2013 Diploma in Social Media MarketingAlison Courses

1999-2004 University of Makati B.S. Computer Science Major in Object Oriented Programming

Special Skills:

Knowledgeable in Windows Operating System (98, 2000, ME, XP, Vista, 7) and MAC Operating System (MAC OS 9x, MAC OS10.1 to 10.4 and Leopard)

Familiarity in different software applications (Microsoft Office, Front Page, Adobe Premiere, Adobe Photoshop); Firewall Configurations; Mail and Related Services MS Outlook, Mac Mail and Windows Mail; Free Mail Services (Hotmail, Yahoo, g-mail) configurations and setup

Able to troubleshoot modem and router configuration (Speedstream, Siemens, Motorola, Netopia Cayman, Linksys, Belkin, D-Link and Netgear) and 2Wire Homeportal (including wireless configuration, HPNA, USB and ethernet)

Operate and maintain computer hardware and software, Knowledgeable in computer troubleshooting, system analysis, can do basic network operations, maintenance and configurations. Knows how to setup and install any software utilities and software with troubleshooting.

Familiarity in different databases (Siebel, UOMS (Unified Order Management Systems), Telstra Applications, EyeQ, CRM)

With background in programming (HTML, Visual Basic 6.0, Excel Macros, MS Access97)


GATMAITAN, ROBIN M. CHIEF AUTOMATION, ROBOTICS & ELECTRICAL

WORK EXPERIENCE:

MCS Mechanical and Control Solutions Inc. (March 2006 – Present) Electrician / SupervisorJob Descriptions

Panel Builder Components Lay-out and installation Wiring of components such as, PLC (Programmable Logic Controller), VFD (Variable

Frequency Drive), Soft Starter, Temperature Controller, Contactor, Relay’s . ETC Test & Commission

Electrical Estimator Electrician Supervisor

Grand Asean Builder & System Corporation (Contractor)Johnson & Johnson, Phils. (January 2001 – August 2004) Maintenance ElectricianJob Descriptions

Report to Immediate Supervisor / Engineer Do the Operation of Power Generating Machine when Power Interruption Occurred or when

it is Needed. Do the Modification of Machine Control as per plan and as per instruction by the Company

Engineer. Do the Troubleshooting, Required Repair, Corrective Actions to keep Electrical Machines,

Electrical Panels and other Equipments Safe to use and in Good Condition at all time. Preventive Maintenance

Inspection of all Electrical Panels and Perform the Required Preventive Maintenance.

Inspection of Power Generator, do a test run to ensure that the units are in good running Condition at all time.

Grand Asean Builder & System Corporation (Contractor)MSF Tires & Rubber Inc. / BF Goodrich formerly Fireston Industrial Technician (January 1996 – December 2000) Job Descriptions

Installation / Recondition of Electrical Machines Dismantling of Existing Electrical Components Cleaning & Reconditioning of Usable Components

(Contractors, Relays, Limit Switch, Etc.) Safekeeping of Components Rewiring of Control Panel Conduit Roughen-In Electrical Installation Test & Commission All Works must be Guaranteed.


Good Housekeeping Should Always be Maintained. Preventive Maintenance

Inspection of Machine, Old and that are Newly Reconditioned. Get P.M. Checklist of Scheduled Machine Regularly and Perform P.M.

Assist on Other Electrical Works to Expedite Completion of Priority Jobs.

Design Packaging Industries, Inc. (April 1991 – November 1995) Filling Machine TechnicianJob Descriptions

Maximize the Reject of Operator Inspection of Machine Regularly Do the Required Repair, Corrective Actions to keep Equipment Safe to use and in Good

Condition at all time.

California Manufacturing Company Inc. (March 1990 – August 1990) Production / Machine OperatorJob Descriptions:

Operates & Maintain a Continuous Production of Machine. List all Defects and Report to Group Leader. Ensure that all Equipment used are Running in Good Condition. Recommend all possible cause of Reject to Supervisor.

PERSONAL DATA:

Date of Birth :August 2, 1969 Place of Birth :Don Galo, ParanaqueCivil Status :Married Height :178 cm.Weight :70 kg. Citizenship :FilipinoReligion : Roman CatholicDependents

Spouse : Agnes Antonio Gatmaitan July 4, 1978 Children’s : Angel A. Gatmaitan February 18, 2002

Alesandra A. Gatmaitan March 16, 2005Avril A. Gatmaitan May 26, 2007Aryanna A. Gatmaitan November 23, 2010

EDUCATIONAL BACKGROUND:

International Electronics And Technical Institute : 1986 - 1988

Parañaque Municipal High School : 1982 – 1986

Don Galo Elementary : 1976 – 1982

EDSON C. DELA TONGA CHIEF MECHANIC


The story of this man brings the true meaning of real life hard work; dedication to his craft has placed him to be one of the experts in the helm of all engines man has ever built. Started his apprentice in the year 1988, he gained actual knowledge in direct trouble shooting and to full auto restoration. As the Chief Mechanic of an Auto Shop which he own just this year, he has been sought after by his neighbors and formercustomers and this has been expanding this is due to his dedication and excellent camaraderie as a good manager of his auto shop. WORK EXPERIENCE: Chief Mechanic: Automotive / Trucks for Gasoline and Diesel enginesCompany: Jun Punzalan Automotive Shop Address: Blk. 4 Lot 2 Haiti St. Better

Living Paraňaque CityFrom February 1987 to September 2012 25 Year’s Work ExperienceDuties and Responsibilities:

Direct engine analysis and examinationConducts body chassis inspection and direct recommendation to clientsEstimates engine cost repair or advice engine replacementConducts under chassis analysis and examination Estimates under chassis cost repair Conducts electrical analysis and examinationRepainting Jobs from strip to metal detailing to simple repaintingRepair Auto Mechanical Overhauling Gas/DieselGeneral Body Repairs from high end cars to sports utility vehiclesBasic Auto Electrical Trouble ShootingComplete Auto restoration detailing

EDUCATIONAL BACKGROUND: Vocational Education: Samson Institute of Technology Course: Automotive Technology Gas/Diesel

Year Graduate: 1987-1988 Secondary Education: Victoria Northern Samar National High School

Year Graduate: 1983-1984 Primary Education: Victoria Northern Samar Elementary School

Year Graduate: 1978-1979 PERSONAL DATA: Age: 46 Birth date: January 3, 1966 Place of birth: Victoria Northern Samar Sex : Male Citizenship : Filipino Religion : Roman Catholic Civil Status : Married Height : 5’6” Weight: 140 lbs.

MISCELLANEOUS INFORMATION: SSS # 33-9474868-0 PHIL HEALTH # 15-201127454-9 Pag-ibig # TIN # 402-690-039

ALEJANDRO L. PILAPIL CHIEF-PANEL FABRICATOR


Having 28 Long years in the field of electrical, mechanical and fabrication designing specificities as requiredby clients for their factories, plants, and assembly power industry plants.

WORK EXPERIENCE :

INTEGRATED ELECTRICAL CONTROLS ( 1985 – 1987 )

Contact Person :Mr. Benny Amurao Address: Brgy. Manuyo, Las Pinas City

Designated Position : Fabricator / Electrician / Lead Service Man MICROMATIC INDUSTRIES ( 1987 – 1989 )

Contact Person : Mr. Jean Vinta Address: Paranaque CityDesignated Position : Foreman Fabricator / Chief Painter

METRAWATT POWER CORPORATION ( 1989 – 2002 )

Contact Person : Mr. Joel Martinez Address : #10 Benedectine St., Designated Position : Operation Manager Brgy. Sun Valley, Paranaque City

TOM’ELEKT ELECTRICAL POWER SYSTEM ( 1994 – 1995 )Contact Person : Mr. Louie Tomas Address : Pandacan, ManilaDesignated Position : Operation Manager

AGA SYSTEM INC. ( 2003 – 2005 )Contact Person : Mr. Gerald A. Arevalo Address: #136 Saudi Arabia St., Better

Living Subd., Designated Position : President Brgy. Don Bosco., P’que City

AJ CONTROL PANEL SYSTEM INC. ( 2005 – 2009 )Contact Person : Mr. July Delos Santos Address: Block 1 Lot 9

Pres. Aguinaldo Ave., Malacanang Village., SAV-1, P’que City

Designated Position : Co-Owner / Operation Manager AMDP CONTROLS SALES AND SERVICES INC. ( 2009 – 2013 )

Address: Block 1 Lot 9 Pres. Aguinaldo Ave., Malacanang Village., SAV-1, P’que City

Designated Position : Co-Owner / President

Engineer * Manufacturer * Specialized Product Fabrication

Switch Board / Switchgear

Power and Distribution Panel

Motor Control Center (MCC )

Manual / Automatic Transfer Switch ( MTS / ATS )

Manual / Automatic Capacitor Bank

Buss-Ducts / Wire Gutters

Transformer Enclosure

SERVICES OFFERED


Wiring, Installation of the above mentioned products

Maintenance and Rehabilitation of Existing Electrical

System

EDUCATIONAL BACKGROUND:

College : Makati Polytechnic Community College

1979-1980

Secondary : Makati High School

1976-1979

Primary : San Isidro Elementary School


E I N S T E I N I T Z G . C A D O R N I G A

Talented and results-oriented Freelance Senior Design Architect with endless passion and appreciation for Modern Contemporary and Minimalist Designs and strong attention to architectural and construction details. Able to manage a series of complex Architectural Designs and Construction Projects from inception to completion, including planning, schematics, estimating, and maintain an excellent relationship by catering design, drafting, supervision services and setting up and attending to meetings and interactions for different firms, companies, and individual clients whenever possible only if available. Expertise in residential, commercial, religious, health care, and public projects; In depth knowledge with sustainable design intent, techniques, applications which conforms to the National Building Code guidelines, standards and jurisdictions. Able to efficiently deliver and complete projects on time with regards to strict but reasonable deadlines.

Working as Licensed Architect, who can handle and manage a series of jobs that will enhance my skills and broaden my knowledge towards the Company’s goals and objectives.

A Filipino Catholic, Married, born on October 24, 1981 in Pasay City and raised in Las Pinas City. I took my elementary years in Alamanza Elementary School from 1987-1994. My interest in Modern Contemporary and Minimalist Architecture grew a continuous learning experience, started way back in St. Mark’s Institute where I finished my high school years until 1999 while working part time every Saturday and Sunday for a Mobile Sounds and Lights System travelling and setting up P.A. systems, concerts and other events in various residences and well known hotels, malls, clubhouses, theaters. I have been fascinated with different structures having somewhat simple facades and interiors yet still turn out to be appealing, elegant, with prestige and showed a massive stand out from the others. Thus, I pursued my college degree taking up B.S. Architecture in Adamson University.

I had additional training and learning of Autocad Drafting and 3D Rendering at Microcadd Technologies located at SM Manila Branch.


SEMINARS / TRAININGS ATTENDED

PERSONAL DATA

CAREER OBLJECTIVE

DESIGN ARCHITECT’S STATEMENT

Advance skills and proficient in using Architecture Desktop 2008, Autocad 2010, Sketch Up 8 + Vray, 3D Studio Viz and 3D Studio Max 2009 + Vray, Adobe Photoshop CS4, Microsoft Office Word, Excel, Power Point.

Craving for additional knowledge, skills, actual work and in-field experience while still studying in the later part of my journey in college, I worked part time as Project Architect/CAD operator/3D/Renderer in a Korean Construction Firm in Sucat, Paranaque for 6 months drafting and preparing drawings for building permits for various projects such as offices, language centers, small apartments and resorts and also a clock tower landmark situated at corner Sucat and SLEX . I was then offered by another Korean Contractor working for him as Freelance Project Architect designing Korean stores and mall outlets until I graduated from college in 2006.

As a requirement for 2 years diversified experience before taking the board exam, I worked for an Architectural Firm in a village still in Sucat, Paranaque City where I continued my career as Junior Project Architect. I drafted and did some renderings of several residential, commercial, institutional, and architectural interior projects for 2 months and have been reassigned as Site Architect/Sub Contractor providing shop drawings and site supervision in reconstructing portions of “Mary de Liguori Parish” located in Magallanes, Makati City from finishing stage until full completion. I also handled and supervised several residential, commercial, institutional, religious and other public projects from design phase to construction phase. Some of which are “Sew-it-Right” and “Tsoko.nut” both located in Alphaland Southgate Mall located in Makati City. I also did supervision, construction methods, techniques, and details as Site Architect for the construction of the “Concierge Booths” located in NAIA Terminal 2 Arrival Area. I was also assigned for making the construction drawings, requirements for building permits, and supervision of the “Adoration Chapel” at Mary de Liguori Parish in Magallanes, Makati City.I took and passed the Architect Licensure Board Exam and started my professional role as Licensed Architect. I had the chance to design 2 residential projects and rendered several consultation services. I also did drafting and 3D renderings for various architectural firms, companies, and fellow architects usually used for building permits and other necessary requirements of the city hall.Currently, I’m handling 8 residential design projects, others in design phase and others already in construction phase. I’m still accepting freelance CAD drafting and consultation services. I usually communicate thru e-mail and phone calls. I attend meetings and site visits with clients only when scheduled and available.


SKILLS

WORK EXPERIENCE

November2010 – Present Las Pinas CityJob title: Worked as Freelance Principal Architect/ Designer / Cad Operator/3D/Renderer

October2008 – October 2010 Marcelo Green Village, West service rd., Sucat, Parañaque City. FCV ArchitectsJob title: Worked as Project Architect/Cad Operator/3D/Renderer

Work Description:

- Prepare working drawings for building permits. - Also provides necessary documents for biddings like; Specifications, Cost Estimates /Bill of Materials, and Scope of Works.- Prepare visual presentations like 3D perspectives, plans/schemes for the proposed project.

Projects:-Residential-Commercial Buildings-Interior Spaces

-Institutional -ReligiousApril 2006 – April 2008 Posadas Village, East service rd., Sucat, Parañaque City. V+M & AssociatesJob title: Worked as Project Architect/ Site Architect / Cad Operator/3D/Renderer

Work Description:

- Prepares working drawings for building permits. - Also provides necessary documents for biddings like; Specifications, Cost Estimates /Bill of Materials, and Scope of Works.- Prepares visual presentations like 3D perspectives, plans/schemes for the proposed project.


WORK EXPERIENCE AS FOLLOWS

Projects:-Residential-Commercial Buildings-Interior Spaces-Institutional

-Religious UNITED

UNITED ARCHITECTS OF THE PHILIPPINES (UAP) – DILIMAN CHAPTER

Note:Other information shall follow soon.


AFFILIATIONS

xa.yimg.comxa.yimg.com/.../21864811/1958259328/name/COMPANY+… · Web viewResponsible for body...

Documents

Transcript of xa.yimg.comxa.yimg.com/.../21864811/1958259328/name/COMPANY+… · Web viewResponsible for body...