X-Treme Shank HSK X-Treme Chuck (INCH Series) X-TREME  · PDF fileJAPAN,EU PAT....

Click here to load reader

  • date post

    14-Apr-2018
  • Category

    Documents

  • view

    223
  • download

    2

Embed Size (px)

Transcript of X-Treme Shank HSK X-Treme Chuck (INCH Series) X-TREME  · PDF fileJAPAN,EU PAT....

  • U.S.A LYNDEX-NIKKENTel.+1-847-367-4800

    MEXICO HERRAMIENTAS LYNDEX-NIKKEN S.A.de C.V.Tel.+52-55-8421-8421

    FRANCE PROCOMO-NIKKEN S.A.STel.+33-(0)-1-69.19.17.35

    UK NIKKEN KOSAKUSHO UK LTD.Tel.+44-(0)-1709-366306

    F.R.GERMANY NIKKEN DEUTSCHLAND GmbHTel.+49-(0)-6142-550600

    ITALY VEGA INTERNATIONAL TOOLS S.P.ATel.+39-011-9497911

    SWITZERLAND NIKKEN SWITZERLAND AGTel.+41-(0)-41-748-5000

    SCANDINAVIA NIKKEN SCANDINAVIA ABSWEDEN Tel.+46-(0)-303-440-600SPAIN CUTTING TOOL S.L (TOOLING)

    Tel.+34-(0)-902-820090PORTUGAL NIKKEN EUROPE DIVISORES ESPANA (CNC ROTARY TABLE)

    Tel.+34-(0)-669-603433D.JB.5

    TURKEY NIKKEN KESICI TAKIMLAR SAN. VE ULUSLARARASI TIC. A.STel.+90-(0)-216-518-1010

    KOREA KOREA NIKKEN LTD.Tel.+82-(0)-32-763-4461

    P.R.CHINA SHANGHAI ZHONG YAN TRADING CO., LTDTel.+86-(0)-216210-2506

    SINGAPORE NIKKEN KOSAKUSHO ASIA PTE, LTDTel.+65-6362-7980

    THAILAND SIAM NIKKEN Co., LTD.Tel.+66(02)178-0503

    http://www.nikken-kosakusho.co.jpe-mail:[email protected]

    Please give your order to the following agent.

    NIKKEN KOSAKUSHO WORKS,LTD. OSAKA, JAPAN.5-1, 1-chome, Minamishinden, Daito-shi, Osaka-fu, Japan. Telephone+81072-869-5820 Telefax+81072-869-6220

    L2

    C1D

    Material: Ti6Al4V Titanium25mm, 6teethCarbide Roughing End Mill25 X Depth 50mm 1 Path MillingNever Pull-Out

    2525mmmm

    mmmm5050

    PAT.P

    Please use direct chucking without KM collet. MAX. 7MPa of center through coolant is available with the stopper. Please use J-type X-Treme chuck, when end mill without oil hole is used. eg) HSK100A-C1 1/4EX-120-J In case of J-type X-Treme chuck, J-type stopper and J-type face cap (with Jet grooves) are attached. 9MC1 1/4HEX-7L-J, 9C1 1/4L-FS-EX-J J-type X-Treme chuck is used for the pocket milling and side milling.

    1 Please contact us for the stopper for X-Treme chuck Inch series.2 The Code No. of the stopper for NBT40-C20EX,HSK63A-C20EX and C8-C20EX is MC20HEX-7L-J X-Treme chuck with nose ring for C spanner is available as an option. Please add "-A" at the end of Code No. eg) NBT50-C25EX-115-J-A

    Nose ring with C spanner

    Photo shows HSK Shank.

    Centre Through MAX. 7MPa

    Please select the proper stopper and the face cap according to your application. end mill with/without coolant hole The stopper and the face cap for the end mill with oil hole are attached as standard accessory.

    Selection of the Accessories

    HSK100A

    TAPER 2

    576770768285

    L

    95105115115120135

    C1

    404855556886

    Weight(kg)

    2.73.03.63.54.05.7

    Handle

    GH16GH20GH25GH25GH329HC42

    NCAT50

    576770768285

    95105105110115125

    404855556886

    4.04.45.04.85.36.6

    GH16GH20GH25GH25GH329HC42

    HSK100A-C 1/2EX- 95-C 5/8EX-105-C 3/4EX-115-C1 EX-115-C1 1/4EX-120-C1 1/2EX-135

    NCAT50-C 1/2EX- 95U-C 5/8EX-105U-C 3/4EX-105U-C1 EX-110U-C1 1/4EX-115U-C1 1/2EX-125U

    Code No.(D - L)

    End mill with oil holeStopper

    9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L

    Face cap9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A

    9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L

    9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A

    C12EXC16EXC20EXC25EXC32EXC42EX

    Stopper9C12SL-FS-EX-A9C16SL-FS-EX-A9C20 -FS-EX-A9C25SL-FS-EX-A9C32SL-FS-EX-A9C42SL-FS-EX-A

    Face cap9MC12HEX- 6L-J9MC16HEX- 6.5L-J

    9MC20HEX- 12L-J29MC25HEX- 6.2L-J9MC32HEX- 7L-J9MC42HEX- 9L-J

    Stopper19C12SL-FS-EX-J9C16SL-FS-EX-J9C20 -FS-EX-J9C25SL-FS-EX-J9C32SL-FS-EX-J9C42SL-FS-EX-J

    Face cap V grooves1

    M12 20L

    M16 20L

    Drive boltEnd mill with oil hole End mill without oil hole

    FSMB10-16FSMB12-16-H8FSMB12-20

    FSMB16-20-H8

    Support bolt

    12EX--A16EX--A20EX--A25EX--A32EX--A42EX-

    Chuck9HC169HC229HC259HC259HC329HC42

    Handle

    Explanation of the Code No.HSK100A C1 1/4EX 120

    Nominal Gauge LengthX-Treme Chuck

    J: J-Type (Jet Groove)

    Symbol of Milling ChuckChucking Capacity

    Shank No.

    J

    Industry proven to eliminate Pull-Out.Exclusively developed for demandingApplications and materials associated With the aircraft and energy industry.

    Inch series is for USA and semi-standard items.

    O-ringPlease insert the stoper which small hole diameter is located at the end mill side. C42: Same hole diameter

    Cross groovePlease insert the stoper which cross groove is located at the end mill side.

    NIKKEN KOSAKUSHO WORKS, LTD.2880

    Excellent Run-out

    Powerful Gripping&

    JAPAN,EU PAT.USA.CHINA. PAT.P

    X-Treme Shank HSK X-Treme Chuck (INCH Series)

    9MC12HEX- 6L9MC16HEX- 6.5L 9MC20HEX- 12L29MC25HEX- 6.2L9MC32HEX- 7L9MC42HEX- 9L

  • X-Treme Shank NBT X-Treme Chuck

  • X-Treme Shank NBT X-Treme Chuck

  • U.S.A LYNDEX-NIKKENTel.+1-847-367-4800

    MEXICO HERRAMIENTAS LYNDEX-NIKKEN S.A.de C.V.Tel.+52-55-8421-8421

    FRANCE PROCOMO-NIKKEN S.A.STel.+33-(0)-1-69.19.17.35

    UK NIKKEN KOSAKUSHO UK LTD.Tel.+44-(0)-1709-366306

    F.R.GERMANY NIKKEN DEUTSCHLAND GmbHTel.+49-(0)-6142-550600

    ITALY VEGA INTERNATIONAL TOOLS S.P.ATel.+39-011-9497911

    SWITZERLAND NIKKEN SWITZERLAND AGTel.+41-(0)-41-748-5000

    SCANDINAVIA NIKKEN SCANDINAVIA ABSWEDEN Tel.+46-(0)-303-440-600SPAIN CUTTING TOOL S.L (TOOLING)

    Tel.+34-(0)-902-820090PORTUGAL NIKKEN EUROPE DIVISORES ESPANA (CNC ROTARY TABLE)

    Tel.+34-(0)-669-603433D.JB.5

    TURKEY NIKKEN KESICI TAKIMLAR SAN. VE ULUSLARARASI TIC. A.STel.+90-(0)-216-518-1010

    KOREA KOREA NIKKEN LTD.Tel.+82-(0)-32-763-4461

    P.R.CHINA SHANGHAI ZHONG YAN TRADING CO., LTDTel.+86-(0)-216210-2506

    SINGAPORE NIKKEN KOSAKUSHO ASIA PTE, LTDTel.+65-6362-7980

    THAILAND SIAM NIKKEN Co., LTD.Tel.+66(02)178-0503

    http://www.nikken-kosakusho.co.jpe-mail:[email protected]

    Please give your order to the following agent.

    NIKKEN KOSAKUSHO WORKS,LTD. OSAKA, JAPAN.5-1, 1-chome, Minamishinden, Daito-shi, Osaka-fu, Japan. Telephone+81072-869-5820 Telefax+81072-869-6220

    L2

    C1D

    Material: Ti6Al4V Titanium25mm, 6teethCarbide Roughing End Mill25 X Depth 50mm 1 Path MillingNever Pull-Out

    2525mmmm

    mmmm5050

    PAT.P

    Please use direct chucking without KM collet. MAX. 7MPa of center through coolant is available with the stopper. Please use J-type X-Treme chuck, when end mill without oil hole is used. eg) HSK100A-C1 1/4EX-120-J In case of J-type X-Treme chuck, J-type stopper and J-type face cap (with Jet grooves) are attached. 9MC1 1/4HEX-7L-J, 9C1 1/4L-FS-EX-J J-type X-Treme chuck is used for the pocket milling and side milling.

    1 Please contact us for the stopper for X-Treme chuck Inch series.2 The Code No. of the stopper for NBT40-C20EX,HSK63A-C20EX and C8-C20EX is MC20HEX-7L-J X-Treme chuck with nose ring for C spanner is available as an option. Please add "-A" at the end of Code No. eg) NBT50-C25EX-115-J-A

    Nose ring with C spanner

    Photo shows HSK Shank.

    Centre Through MAX. 7MPa

    Please select the proper stopper and the face cap according to your application. end mill with/without coolant hole The stopper and the face cap for the end mill with oil hole are attached as standard accessory.

    Selection of the Accessories

    HSK100A

    TAPER 2

    576770768285

    L

    95105115115120135

    C1

    404855556886

    Weight(kg)

    2.73.03.63.54.05.7

    Handle

    GH16GH20GH25GH25GH329HC42

    NCAT50

    576770768285

    95105105110115125

    404855556886

    4.04.45.04.85.36.6

    GH16GH20GH25GH25GH329HC42

    HSK100A-C 1/2EX- 95-C 5/8EX-105-C 3/4EX-115-C1 EX-115-C1 1/4EX-120-C1 1/2EX-135

    NCAT50-C 1/2EX- 95U-C 5/8EX-105U-C 3/4EX-105U-C1 EX-110U-C1 1/4EX-115U-C1 1/2EX-125U

    Code No.(D - L)

    End mill with oil holeStopper

    9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L

    Face cap9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A

    9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L

    9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A

    C12EXC16EXC20EXC25EXC32EXC42EX

    Stopper9C12SL-FS-EX-A9C16SL-FS-EX-A9C20 -FS-EX-A9C25SL-FS-EX-A9C32SL-FS-EX-A9C42SL-FS-EX-A

    Face cap9MC12HEX- 6L-J9MC16HEX- 6.5L-J

    9MC20HEX- 12L-J29MC25HEX- 6.2L-J9MC32HEX- 7L-J9MC42HEX- 9L-J

    Stopper19C12SL-FS-EX-J9C16SL-FS-EX-J9C20 -FS-EX-J9C25SL-FS-EX-J9C32SL-FS-EX-J9C42SL-FS-EX-J

    Face cap V grooves1

    M12 20L

    M16 20L

    Drive boltEnd mill with oil hole End mill without oil hole

    FSMB10-16FSMB12-16-H8FSMB12-20

    FSMB16-20-H8

    Support bolt

    12EX--A16EX--A20EX--A25EX--A32EX--A42EX-

    Chuck9HC169HC229HC259HC259HC329HC42

    Handle

    Explanation of the Code No.HSK100A C1 1/4EX 120

    Nominal Gauge LengthX-Treme Chuck

    J: J-Type (Jet Groove)

    Symbol of Milling ChuckChucking Capacity

    Shank No.

    J

    Industry proven to eliminate Pull-Out.Exclusively developed for demandingApplications and materials associated With the aircraft and energy industry.

    Inch series is for USA and semi-standard items.

    O-ringPlease insert the stoper which small hole diameter is located at the end mi