Www.rustonil.co.in For any query, please contact at: [email protected] 1 Setting New Standards for...
-
Upload
shayla-staring -
Category
Documents
-
view
220 -
download
3
Transcript of Www.rustonil.co.in For any query, please contact at: [email protected] 1 Setting New Standards for...
www.rustonil.co.in For any query, please contact at: [email protected]
Setting New Standards for Anti CorrosiveSetting New Standards for Anti Corrosive
RUSTONIL
A Product by
Trimurti (India)(An ISO 9001:2000 Certified Company)
www.rustonil.co.in For any query, please contact at: [email protected]
Company IntroductionCompany Introduction
Trimurti India has existence as a premier manufacturing organization Since 1985 dedicated to fulfill the commitment of providing quality products to our customers, the Company has excelled over the years and today enjoys an enviable reputation of being a leading anticorrosive product manufacturing company. In 1995, we registered our firm as M/s Trimurti Drinks, and worked as whole sole suppliers of cold drinks, and have been using RUSTONIL for our individual purposes & since then we started marketing of our product in various private and government departments and got very good response, so we stepped in bulk manufacturing of RUSTONIL FZ105 in the year 1996 and change the firm from M/s Trimurti Drinks to M/s Trimurti (India).
www.rustonil.co.in For any query, please contact at: [email protected]
ArchivesArchivesSince corrosion is a major problem in our life, for finding a solution to this is a great achievement. Many persons worked on it at national & international level but none get a satisfactory result, we too have made great efforts in developing this product. Since 1985 we started manufacturing RUSTONIL & made a product which only removes the rust. Our R & D results in developing a product which not only removes rust but is a grade above it as it also converts rust into iron and forms molecular bounding which protects from further rusting. This is how we came to evolve this product of ours. In the evolution of this chemical Mr. K. N. Misra played a major role as he is the one who with his knowledge & Revolutionary Efforts in Iron & Steel Industry. Then in the year 2000 we launched this product in Indian International Trade Fare, New Delhi (Pragati Maidan) as we have been promoted by U.P. Government. After this we launched it as we get very good response from many companies of National & International levels, they not only took interest but also praised our product. This is how we came to know its importance & finally introduced it to the market.
www.rustonil.co.in For any query, please contact at: [email protected]
Our Product is a lead free. Since lead is a highly toxic metal that has detrimental health effects. Lead based paints have been found to poison waterways & rivers, causing cancer & illness. Our product is made with eco-friendly ingredients.
Anti corrosive properties of our product offer excellent UV & salt resistance. Lab tests have shown that RUSTONIL treated objects has best performance as compared to the existing anticorrosive products in the market when subject to the same salt spray & UV tests. RUSTONIL has an upper edge over the other existing products as it is a single – step application process for removing & converting rust into iron & further protecting iron from rusting.
RUSTONIL which, upon drying, will result in a long-lasting black surface on the treated object surface. This treated surface provides better bonding to the paint that ferrous phosphate (Primer) & the resulting surface after treatment gives exceptionally smooth finish.
Our TechnologyOur Technology
www.rustonil.co.in For any query, please contact at: [email protected]
RUSTONILRUSTONIL : Introduction : IntroductionIt is a anti corrosive chemical which convert the rust into iron.
Rustonil can easily remove the rust from any type of rusted iron and further protects iron from rusting for a period of 12 to 18 months.
Rustonil is a monopoly chemical.
Company supplies the chemical direct to the industries.
www.rustonil.co.in For any query, please contact at: [email protected]
ImportanceImportanceRUSTONIL can easily remove the rust from any type of oldest
iron and it protects iron for 12 to 18 months. It removes the
rust.
Protects the iron from further rusting for a period of 12 to 18
months.
There is no need of applying any primer or sand paper, before
or after application of RUSTONIL.
It saves time, money and labor.
Company is responsible to look after its shortcomings.
It is pollution free and has no side effect.
It’s a water based chemical and can be used very easily.
www.rustonil.co.in For any query, please contact at: [email protected]
UsesUses
It is used in all Civil and Maintenance
Department.
Can earn more money in less expenses.
Can be applied on all types of construction steel
materials or industrial finished products. e.g.
Rods, Channels, joists, sheets, jobs etc.
Is a labour saving product.
www.rustonil.co.in For any query, please contact at: [email protected]
Results of RUSTONILResults of RUSTONIL
www.rustonil.co.in For any query, please contact at: [email protected]
Application of RUSTONILApplication of RUSTONILRUSTONIL needs single step application as it requires minimal or
no surface preparation before application on the surface to be
treated (Iron & Steel).
Put the liquid in a Plastic or PVC Container. Clean the Steel Surface or Parts from Dust, Rusty Particles, Grease or Oil and allow the surface to dry. Thoroughly shake RUSTONIL before application. Wait for 10 minutes for completing the Reaction Process and Leave for 24 hours for curing before any other application. Any Skilled or Un-skilled Person can apply the “RUSTONIL”.
www.rustonil.co.in For any query, please contact at: [email protected]
It can be applied by any of the following process:
1. Using Cotton
2. Using Brush
3. Through Spray Gun
4. By direct dipping.
We use to prefer dipping process as it consumes less
material because larger surface area of the object to be
treated comes in contact with the chemical resulting in
excellent performance.
www.rustonil.co.in For any query, please contact at: [email protected]
USING COTTON
Clean the dust from rusted area to be treated and then apply
RUSTONIL by using cotton soaked in RUSTONIL. Then leave
the treated Object for atleast 15 to 20 minutes to dry to get best
result.
USING BRUSH
Repeat the same process as stated above, using brush.
USING SPRAY GUN
Repeat the same process as stated above, using spray gun
www.rustonil.co.in For any query, please contact at: [email protected]
DIRECT DIPPING
Immerse the object to be treated in the RUSTONIL for about 15
to 20 minutes, and then leave the object until it gets dried.
Apply RUSTONIL on the surface to be treated by any of the
above mentioned procedure & leave the object for atleast 15 to
20 minutes to let the reaction be completed which is
acknowledge when the treated surface gets dried rusting into
black surface which is free from rust & also strengthens the iron
bonding which gives protection from further rusting.
www.rustonil.co.in For any query, please contact at: [email protected]
Coverage AreaCoverage Area
By Brush 185 sq. ft.
By Spray 213 sq. ft.
By Cotton 200 sq. ft.
Through Dipping 300 sq. ft.
www.rustonil.co.in For any query, please contact at: [email protected]
PrecautionsPrecautionsShake well before use.
Object to be treated should be free from dust or paints or any
other kind of external covering as these external layers
prevent RUSTONIL to get in contact with the rusted iron
surface which results in poor performance.
Avoid contact with water until the treated surface gets dried
off.
There is no need to mix any other chemical in RUSTONIL.
Apply only on dry Iron surface.
Keep away from children's reach.
Refer MSDS for technical & safety measures.
www.rustonil.co.in For any query, please contact at: [email protected]
Frequently Asked QuestionsFrequently Asked QuestionsQ. 1. What is Rust?
Ans. Rust is a general term for iron oxides formed by the reaction of iron
with oxygen. Several forms of rust are distinguishable visually and
by spectroscopy, and form under different circumstances. The
chemical composition of rust is typically hydrated iron (III) oxide
(Fe2O3.nH2O), and under wet conditions may include iron (III) oxide-
hydroxide (FeO(OH)). Rusting is the common term for corrosion of
iron and its alloys, such as steel. Although oxidation of other metals
is equivalent, these oxides are not commonly called rust.
www.rustonil.co.in For any query, please contact at: [email protected]
Q. 2. How does Rust work?
Ans. Rust is the common name for a very common compound, iron oxide.
Iron oxide, the chemical Fe2O3, is common because iron combines
very readily with oxygen -- so readily, in fact, that pure iron is only
rarely found in nature. Iron (or steel) rusting is an example of
corrosion -- an electrochemical process involving an anode (a piece
of metal that readily gives up electrons), an electrolyte (a liquid that
helps electrons move) and a cathode (a piece of metal that readily
accepts electrons). When a piece of metal corrodes, the electrolyte
helps provide oxygen to the anode.
As oxygen combines with the metal, electrons are liberated. When
they flow through the electrolyte to the cathode, the metal of the
anode disappears, swept away by the electrical flow or converted
into metal cat ions in a form such as rust.
www.rustonil.co.in For any query, please contact at: [email protected]
For iron to become iron oxide, three things are required: iron, water and
oxygen. Here's what happens when the three get together:
When a drop of water hits an iron object, two things begin to happen
almost immediately. First, the water, a good electrolyte, combines with
carbon dioxide in the air to form a weak carbonic acid, an even better
electrolyte. As the acid is formed and the iron dissolved, some of the water
will begin to break down into its component pieces -- hydrogen and oxygen.
The free oxygen and dissolved iron bond into iron oxide, in the process
freeing electrons. The electrons liberated from the anode portion of the iron
flow to the cathode, which may be a piece of a metal less electrically
reactive than iron, or another point on the piece of iron itself.
The chemical compounds found in liquids like acid rain, seawater and the
salt-loaded spray from snow-belt roads make them better electrolytes than
pure water, allowing their presence to speed the process of rusting on iron
and other forms of corrosion on other metals.
www.rustonil.co.in For any query, please contact at: [email protected]
Q. 3. How RUSTONIL Works?
Ans. Rustonil works on our Core Technology. On applying Rustonil over
rusted surface, results into 3 simultaneous processes i.e. removing
& converting of rust into iron and further protection from rusting.
Rustonil works on the Principle of displacement i.e. it releases
oxygen molecules from ferric oxide resulting into pure iron & then it
strengthens the iron’s molecular bonding which results in providing
protection from further rusting.
Concept of Rust: Rust is scientifically called oxidation, which occur
when oxygen cover in long-term contact with certain metals.
www.rustonil.co.in For any query, please contact at: [email protected]
Q. 4. How Does RUSTONIL improves the strength and life of Construction?
Ans. Due to formation of micro crystals, the crystal arrangement is so close and interwoven that water and gases cannot penetrate through it, in addition to this it helps in developing massive and tenacious bond with cement concrete, improving strength and life of the construction.
Q. 5. Does water in the presence of oxygen cause metal corrosion or rust?
Ans. Yes it does, but the water in “RUSTONIL” emulsions contains a rust inhibitor to prevent this from happening. Will this anti corrosion coating wash off if it rains? Not once the emulsions dries. It is dry to the touch in less then 1-hour and after 24 hour cure, water will not remove the corrosion resistant coating. The cure time can be reduced with hot air blowers.
www.rustonil.co.in For any query, please contact at: [email protected]
Q. 6. How do I clean up after using RUSTONIL water based treatment?
Ans. Simply wash everything down with water. If spray equipment is used, run water through it until it is clear. How do I remove the cured protective coating? Heat the treated metal up to 600º C to make it read hot to loosen the grip of “RUSTONIL”.
www.rustonil.co.in For any query, please contact at: [email protected]
Thanks for Your Thanks for Your Precious TimePrecious Time