www.planet.com.tw

IPX-600IP PBX with Gateway Configuration

Internet Telephony PBX System

Copyright © PLANET Technology Corporation. All rights reserved.

2 / 12

www.planet.com.tw

Scenarios explain: SIP Proxy ModeWe're using the IPX-600 and VIP-281FO to perform the calling party.

Please refer to the following descriptions and insert proper parameters configurations into the each device for establish the voice communications.

3 / 12

www.planet.com.tw

11

22

Setup the WAN and LAN Setup the WAN and LAN interface of interface of IPX-600 IPX-600 follow follow the information of IP that the information of IP that provides by ISPprovides by ISP

Click the [Click the [Network SetupNetwork Setup] to set up the WAN and LAN ] to set up the WAN and LAN interface for the IP PBX, If the IP PBXs not under the interface for the IP PBX, If the IP PBXs not under the NAT, disable the STUN server.NAT, disable the STUN server.

4 / 12

www.planet.com.tw

Select the [Select the [IP PBX->Users Mgmt.IP PBX->Users Mgmt.] of ] of IP PBX IP PBX and click and click button in main page to create user accountbutton in main page to create user account for the for the SIP clientSIP client..

33

44

First Number: First Number: 100100 Number of users : Number of users : 22Password:Password: 100 100Check Auto-increaseCheck Auto-increaseGoTo VM after Ringing:GoTo VM after Ringing: 30 30

(As you requirement to creat(As you requirement to create users counts.)e users counts.)

5 / 12

www.planet.com.tw

Click the [Click the [ApplyApply] button to reload the IP PBX User Management ] button to reload the IP PBX User Management configuration. configuration.

55

6 / 12

www.planet.com.tw

After confirming the modification you’ve After confirming the modification you’ve does, please click on the [does, please click on the [ApplyApply] button to ] button to add the gateway, then will be return to add the gateway, then will be return to gateway list please click [gateway list please click [ApplyApply] again to ] again to make the gateway effective. make the gateway effective.

66

Select the [Select the [IP PBX->GatewayIP PBX->Gateway] of ] of IP PBX IP PBX and click button in and click button in main page to add gatewaymain page to add gateway for the for the IP PBXIP PBX..

Please fill in that gateway Please fill in that gateway informationinformationName : Name : VIP-281FOVIP-281FOGateway IP : Gateway IP : 192.168.0.10192.168.0.10Gateway port : Gateway port : 50605060 Number of Analog Ports : Number of Analog Ports : 22Gateway Location : Gateway Location : LANLAN

77

7 / 12

www.planet.com.tw

Select theSelect the[[IP PBX->Call RouteIP PBX->Call Route] of ] of IP PBX IP PBX to to create a call create a call route which connect route which connect with gateway.with gateway.

Create a Call Route :Create a Call Route :PABXPABXPattern : Pattern : 0. 0. (The ‘(The ‘..’ is represent the unlimited length of wildcards.)’ is represent the unlimited length of wildcards.)Drop Digits:Drop Digits: 0 0 (The first few digit of the dialer number will be removed a(The first few digit of the dialer number will be removed after going out the device when the dialed number matches pattern.)fter going out the device when the dialed number matches pattern.)Primary / Backup Route via:Primary / Backup Route via: VIP-281FO VIP-281FOThis Route is for user can to dial This Route is for user can to dial 0 + PABX ext. number0 + PABX ext. number for convenient t for convenient to make a call. o make a call.

Click the [Click the [ApplyApply] button to reload the IP PBX ] button to reload the IP PBX Call Route configuration. Call Route configuration.

88

99

1010

8 / 12

www.planet.com.tw

Select theSelect the[[IP PBX->Route GroupIP PBX->Route Group] of ] of IP IP PBX PBX to create a route rule to create a route rule which connect with which connect with gateway.gateway.

Add “Add “PABXPABX”” call route to call route to Activated call RouteActivated call Route field, than leave field, than leave after click [after click [ApplyApply] then will be return to Route Group list please ] then will be return to Route Group list please click [click [ApplyApply] again for activate the configuration.] again for activate the configuration.

1111

1212

9 / 12

www.planet.com.tw

Select theSelect the[[Advance Setup->WAN SettingAdvance Setup->WAN Setting] of ] of Gateway Gateway to to settings the WAN interface IP addresssettings the WAN interface IP address

WAN Type Setting :WAN Type Setting :Static IPStatic IPIP Address :IP Address :192.168.0.10192.168.0.10Subnet Mask :Subnet Mask :255.255.255.0255.255.255.0Default Router :Default Router :192.168.0.1192.168.0.1

1313

Click the [Click the [ApplyApply] button to complete the ] button to complete the WAN Port ConfigurationWAN Port Configuration

10 / 12

www.planet.com.tw

Select theSelect the[[Advance Setup->VoIP BasicAdvance Setup->VoIP Basic] of ] of Gateway Gateway to settinto settings the FXO port SIP accountgs the FXO port SIP account1414

VoIP Protocol Setting :VoIP Protocol Setting : SISIPPNumber : Number : 105105Check the RegCheck the RegAccount : Account : 105105Password : Password : 105105

Check EnableCheck Enable Use Public AUse Public Account (Port 1)ccount (Port 1)

Check Hunting Member pCheck Hunting Member port 1 and Port 2ort 1 and Port 2

11 / 12

www.planet.com.tw

SIP Proxy Settings :SIP Proxy Settings :Domain/Realm :Domain/Realm :192.168.0.1192.168.0.1SIP Proxy Server :SIP Proxy Server :192.168.0.1/5060192.168.0.1/5060SIP Authentication :SIP Authentication :EnableEnable

Click the [Click the [ApplyApply] button to complete the VoIP Ba] button to complete the VoIP Basic Configurationsic Configuration

1515

12 / 12

www.planet.com.tw

Select theSelect the[[Advance Setup->Dialing PlanAdvance Setup->Dialing Plan] of ] of Gateway Gateway to to added the dialing plan number.added the dialing plan number.

Incoming Dial Plan :Incoming Dial Plan : Incoming no : Incoming no : 00Length of Number :Length of Number :1 ~ 41 ~ 4Delete Length : Delete Length : 11Prefix no : Prefix no : NullNullDestination telephone Destination telephone Port :Port : 1,2 1,2

And click on the And click on the ADDADD button to loaded into button to loaded into the list.the list.

1616

13 / 12

www.planet.com.tw

Select theSelect the[[Advance Setup->Hot Line SettingAdvance Setup->Hot Line Setting] of ] of Gateway Gateway to to settings the hotline number.settings the hotline number.

HotLine number settingsHotLine number settingsPort 1 number :Port 1 number : 9997 9997Port 2 number :Port 2 number : 9997 9997Auto dialed 9997 for incomiAuto dialed 9997 for incoming calls.ng calls.

Click the [Click the [ApplyApply] button to complete ] button to complete the Hot Line Configurationthe Hot Line Configuration

Click the [Click the [Save ConfigurationSave Configuration] ] button to save parameter and button to save parameter and then click the [then click the [RebootReboot] button to ] button to restart after save configuration.restart after save configuration.

1717

1818

14 / 12

www.planet.com.tw

IP Phone AIP Type : Fixed IPFixed IPIP: 192.168.0.3 192.168.0.3Mask: 255.255.255.0 255.255.255.0Gateway: 192.168.0.1 192.168.0.1

IP Phone BIP Type : Fixed IPFixed IPIP: 219.39.241.13 219.39.241.13Mask: 255.255.255.0 255.255.255.0Gateway: 219.93.241.1 219.93.241.1

After confirming the modification After confirming the modification you’ve done, Please click on you’ve done, Please click on the the SubmitSubmit button to apply button to apply settings.settings.

1919

IP Phone A

IP Phone B

VIP-154T Network Settings

15 / 12

www.planet.com.tw

IP Phone AActive : OnOnDisplay Name: 104104Line Number : 104104Register Name: 104104Register Password: 123123Domain Server: 192.168.0.1 192.168.0.1Proxy Server: 192.168.0.1192.168.0.1

IP Phone BActive : OnOnDisplay Name: 105105Line Number : 105105Register Name: 105105Register Password: 123123Domain Server: 122.255.105.25 122.255.105.25Proxy Server: 122.255.105.25122.255.105.25

After confirming the modification After confirming the modification you’ve done, Please click on the you’ve done, Please click on the SubmitSubmit button to apply settings. button to apply settings.

2020

IP Phone A

IP Phone B

VIP-154T Settings for register IP PBX

16 / 12

www.planet.com.tw

Browser to Browser to Save & RebootSave & Reboot menu to reboot the menu to reboot the machine to make the settings effective.machine to make the settings effective.

2121

17 / 12

www.planet.com.tw

For example:1.From PABX make call to IP Phone A or BStep 1. Pick up the handset and input number 262 when listen to dial-tone.

Step 2. You will be listen to the greeting prompt voice from IP PBX.

Step 3. Enter an IP Phone extension number 100 or 101

Step 4. Then the IP Phone should be ring at this time.

Step 5. You pick up handset establish voice communication begin.

2.From IP Phone make call to PABX Ext.Step 1. Pick up the handset and hearing the dial-tone

Step 2. Enter a extension number of the PABX system, such as 0263 and end with #.

Step 2. Then the ext.263 Analog phone of the PABX, should be ring at this time.

Step 3. You can pick up handset establish voice communication begin.

NOTE:

The mentioned parameters and network settings in this sample be carefully modified to meet the real-world applications.

www.planet.com.tw