Www.hvac.vn Water Detectors The materials included in this compilation are for the use of Dwyer...
-
Upload
jody-bryan -
Category
Documents
-
view
215 -
download
0
Transcript of Www.hvac.vn Water Detectors The materials included in this compilation are for the use of Dwyer...
www.hvac.vn
www.hvac.vn
Water Detectors
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific,
written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
www.hvac.vn
Overview
WD – Water Detector and Sensor Tape
WD3 – Water Leak Detector
www.hvac.vn
WD - Introduction
Designed for dependable detection of low levels of conductive liquidsWater sensing tape attaches to module and if any liquid comes in contact with the tape the resistance is changed and the alarm will be triggeredTape is hydrophobic. Faster drying time since tape doesn’t absorb
www.hvac.vn
WD - Key Specifications
Switch Type: DPDTElectrical Rating: 1 A @ 24 VAC/VDCPower Requirements: 24 VAC, 24 to 30 VDCPower Consumption: 35 mA maximumEnclosure: Extruded aluminumSensor Tape: 1˝ (25.4 mm) wide and 5´ (1.5 meters), 10´, 15´ or 25´ (8 meters) long
www.hvac.vn
WD - FeaturesSensing tape is 1˝ wide and can be bought in lengths of 5´ (1.5meters), 10´, 15´ and 25´ (8meters)Multiple tapes can be connected together to extend the coverage area (120 meter max)Power and alarm LED’s,Other features include alarm test switch, continuous tape integrity self check and extendable tape sensor
www.hvac.vn
WD - Applications
Leak detection for large equipmentFurnaces, boilers, chillers,
Data Centers, etc
Tape can cover the whole floor under the equipment
www.hvac.vn
WD - Applications
Evaporator pans under refrigerators, freezers, and air handlersGeneral utility rooms in plants
www.hvac.vn
WD3 - Introduction
Detects the presence of water to prevent water damageAudible and visual alerts provide local indication of the alarm conditionInternal switch will give remote indication or control to prevent further build up of water
www.hvac.vn
WD3 -Key Specifications
Switch Type:Battery Powered Models: SPST NOExternal Powered Models: DPDT
Audible Alarm: At least 85 dB @ 1 foot distance (depends on model).Visual Alarm:
Red LED for water levelYellow LED for low battery (battery powered models only)Green LED for power condition (external powered models only)
www.hvac.vn
WD3 - Key Specifications
Enclosure Material: ABS and polycarbonate with flammability classification UL 94 V-0.Enclosure Rating:
Audible Alarm Models: Water-tight up to 3/4 of the body heightNon-Audible Alarm Models: NEMA 6P (IP 68) submersible
Agency Approvals: CE, RoHS
www.hvac.vn
WD3 - Technology
The sensor consists of two electrical contactsWhen the water level reaches a certain level, it bridges the contacts and allows current to flow
www.hvac.vn
WD3 - Features
Depending on the model orderedAudible and visual alerts provide local indication of the alarm conditionInternal switch will give remote indication or control to prevent further build up of water
Sensing height can be adjusted by using bracketMounting bracket can attach to any flat surface by either using the attached adhesive strips or mounting screwsCan be battery-powered or externally powered
www.hvac.vn
WD3 - Applications
Condensate leak detectionAir handlers, fan coil units, unit ventilators, data centers
www.hvac.vn
WD3 - Applications
Under-floor air systemsRaised floors serve as the air circulation space for heating and cooling