www.huawei.com

China Telecom grant a free, irrevocable license to 3GPP2 and its Organizational Partners to incorporate text or other copyrightable material contained in the contribution and any modifications thereof in the creation of 3GPP2 publications; to copyright and sell in Organizational Partner's name any Organizational Partner's standards publication even though it may include all or portions of this contribution; and at the Organizational Partner's sole discretion to permit others to reproduce in whole or in part such contribution or the resulting Organizational Partner's standards publication. China Telecom. is also willing to grant licenses under such contributor copyrights to third parties on reasonable, non-discriminatory terms and conditions for purpose of practicing an Organizational Partner’s standard which incorporates this contribution.This document has been prepared by China Telecom to assist the development of specifications by 3GPP2. It is proposed to the Committee as a basis for discussion and is not to be construed as a binding proposal on China Telecom. China Telecom specifically reserve the right to amend or modify the material contained herein and to any intellectual property of China Telecom other than provided in the copyright statement above.

ES Discussion

zhucq@ctbri.com.cn

Abstract: This contribution discusses several issues of CDMA ES.

Recommendation: For discussion

liujixing@huawei.com

Page 2

LTE ANR Review-Automatic Neighbor Relation

The ANR function resides in the eNB and manages the conceptual Neighbour Relation Table (NRT)

The ANR function also allows O&M to manage the NRT. O&M can add and delete NRs. The O&M system is informed about changes in the NRT.

If a configuration of an eNB is updated, its neighbour will be informed via X2 interface.

Neighbour Detection Function

Internal Iinformation

RRC

Mrmnt reports

Mrmnt requests

Add

/Upd

ate

Nei

ghbo

r R

elat

ions

NR

rep

ort

ANR function

eNB

O&M

NRadd

NRTManagemnt

Function

NeighbourRemovalFunction

NRremove

NRupdate

Neighbor Relation Table

1

2

TCI

3

No Remove

TCI#1

TCI#1

No HO No X2

O&M controlledNeighbour Relation Attributes

Neighbour Relation

NR

TCl#1

Page 3

LTE- ANR Updated

The ANR (Automatic Neighbour Relation) function relies on cells broadcasting their identity on global level, E-UTRAN Cell Global Identifier (ECGI).

Cell A Phy-CID=3 Global-CID =17

Cell B Phy-CID=5 Global-CID =19

1) report(Phy-CID=5, strong signal)

2) Report Global-CID Request (Target Phy-CID=5)

2b) Read BCCH()

3) Report Global-CID=19

Page 4

CDMA Neighbor Relation

MS makes periodic measurement of the neighbors based on the neighbor list broadcasted by the network.

The searcher checks pilots in nested loops. Actives and candidates occupy the fastest spinning

wheel. Neighbors are next, advancing one pilot for each Act+Cand revolution. Remaining is slowest, advancing one pilot each time the Neighbors revolve.

If a neighbor is not included in the neighbor list, It will take a long time to find it.

MS only reports the PN to the network, if PN conflicts, the network can not determine the neighbor cell uniquely.

Page 5

NR Discrepancy between CDMA and LTE

LTE CDMA(e.g. HRPD)

Measurement object E-UTRA carrier frequency. NR configuration doesn’t impact the search procedure.

Carrier frequency and PN.NR configuration impacts the search procedure.

HO impact HO can be executed with ANR support even if the target cell is not configured as a neighbor.

HO can not be executed if the target cell is not configured as a neighbor.

The NR issues in two systems are different and irrelevant.

Page 6

NR Update for ES

After ES Coverage Compensation, the neighbor RANs should know the new NR with the compensation Cell. The power-off cell/sector/carriers are removed from both system

broadcast parameter list and neighbor cells/sectors parameter list. The Compensation cell/sector/carriers are added into system

broadcast neighbor cell/sector parameter list and neighbor cells/sectors parameter list.

After ES Coverage Compensation withdraw, the neighbor RANs should restore the NR.

The Compensation cell/sector/carriers are removed from system broadcast neighbor cell/sector parameter list and neighbor cells/sectors parameter list.

The restored cell/sector/carriers are added into both system broadcast parameter list and neighbor cells/sectors parameter list.

Page 7

Coverage Compensation with NR Update

C2 requests C3 to perform coverage compensation, the request includes C2’s neighbor cells info(C1,C3,C4). C3 confirms to perform coverage expansion for C2 coverage area. C2 notifies the neighbor cells (C1,C4) that C2 is off and its

coverage is compensated by C3.C1,C4 update NR(i.e. remove C2 and add C3)

C1 C3C2Before ES

C4

C1C3

C2

C4

After ES coverage compensation (c2 is off, c3 extents coverage to C2 area)

Neighbour cells: C2

Neighbour cells: C2Neighbour cells: C2

Neighbour cells: C1,C3,C4

Neighbour cells: C4

Neighbour cells: C3Neighbour cells: C3

Page 8

Call Flow-Coverage Compensation Extension

Call Flow-Coverage Compensation Fallback

Page 10

Suggestion

ES coverage compensation contribution shall be independent from other RATs.

Page 11

Thanks