Web viewPlease make every effort to fill out this form electronically and in “word ... (Apple)...
Transcript of Web viewPlease make every effort to fill out this form electronically and in “word ... (Apple)...
Client:
POC:
Address: Date:
Phone:
E-Mail:
1
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
To obtain a detailed Bulldog quote you must fill out the attached spec sheet. Please make every effort to fill out this form electronically and in “word” format. If you prefer to fill out this form by hand you may do so and fax it back to H&H at: 207-247-2755 or mail to:
Howe & Howe TechnologiesAttn: Bulldog Department
661 Main Street Waterboro, ME 04087
Please note that filling the form out by hand is acceptable but is not the preferred method as it will result in a longer wait time for receiving your detailed quote.
Fill out the form by clicking inside the check box next to the item desired, this should put an “x” in the box (see Example 1 below). Mac (Apple) users may not have compatibility with the check box feature. If you are unable to mark the check box please insert a “Y” in front of the check box next to the desired item (see Example 2 below).
Example 1: ☒Example 2: Y☐E-Mail your completed spec sheet to:
Geoffrey Howe - [email protected]
If you require any assistance in filling out your spec sheet please feel free to contact the Howe & Howe Technologies Bulldog Department by phone: 207-247-2777 or by e-mail: [email protected].
Thank you and we look forward to hearing from you!
--
Howe & Howe Technologies
Bulldog Dept.
2
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Truck☐- 2 Wheel Drive ☐- 4 Wheel Drive – HH RECOMMENDED☐- Single Axle – HH RECOMMENDED☐- 2 Door Cab – HH RECOMMENDED☐- 4 Door Cab☐- Automatic – HH RECOMMENDED☐- Front Axle 14K☐- Front Axle 16K – HH RECOMMENDED☐- Rear Axle 23K – HH RECOMMENDED☐- Rear Axle 26K☐-Engine Exhaust Brake☐- Steering Stabilizer – HH RECOMMENDED☐-VSS (Vehicle Stability System: anti-rollover)☐- 35,000 GVW – HH RECOMMENDED☐- 300+ Horse Power – HH RECOMMENDED FOR TIER 1 ☐- 50gal Fuel Tank Minimum - HH RECOMMENDED☐- Visor: Top of Cab☐- Air Horns (Hood Mounted) – HH RECOMMENDED☐- Rear Sliding Window☐- VDL (Vehicle Data Logger)☐- Air Ride Drivers Seat w/ Officer Seat – HH RECOMMENDED☐- Rear Passenger Seats (4 Door Only)☐- Heated Mirrors w/ Electronic Control☐- Cruise Control☐- Air Conditioning – HH RECOMMENDED☐- AM/FM Radio☐- Custom Center Console☐- Extra Interior Lighting☐- Tires: Heavy Duty 54” XZL (Top Speed Rating: 55mph)☐- Tires: Heavy Duty 46” On/Off Road☐- Steel Wheels – HH RECOMMENDED
Desired Truck Specs
Overall Height ___ 54” =10’9” _____ 46” = 10’4”_____
Maximum Step Height ______________
Maximum Speed __________________ - HH RECOMMENDED: (55mph 54”) (65mph 46”)
3
Truck Tier Selection
☒- Tier 1: New 2016-2017 Chassis: International 7400-7600 4x4
Tier 2 & 3 Special order only call for details ☐- Tier 2: 2003-2008 Chassis:International 7400-7600 4x4
☐-Tier 3: 1992-2002 Chassis:International 4800 4x4
Tire Selection
When selecting a tire option please keep in mind what type of terrain your Bulldog will be traveling on. The 54” XZL tires have a top speed rating of 55mph. They are designed for slow speed of travel across mostly off road terrain and very limited low speed highway travel. The 46” On/Off Road tires are more suitable for longer distance highway travel at normal rates of speed.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Truck (continued)
Siren☐- HH Siren – HH RECOMMENDED☐- Speaker: One (1)☐- Speakers: Dual☐-Radio Rebroadcast Function☐-Multifunction Controller with auxiliary switches
Specify Desired Siren Specs:
Watts: _______100___ - HH RECOMMENDS 100 WATTS
Mounted Location on Truck: _________________
Radio☐- Headsets w/ PTT on Headset
Specify Desired Radio Specs:
Radio Brand: __________________
Mounted Location: ________________
Skid Plates:
☐- Front Bumper to Front Axle
☐- Cover Transmission and Transfer Case
☐- Fuel Tank and Battery Box
☐- Additional Skid Protection Required:
Specify: ____________________________________
___________________________________________
___________________________________________
Apparatus Body
4
Truck Notes/Comments:
Reflective OptionsReflectives:☐- None (Not for U.S.)☐- Standard DOT ☐- Standard NFPA☐- Custom
Truck Logo OptionsDepartment Logos: ☐- None☐- Reflective☐-Custom
Radio Installation Options
☐- Customer Handles Install☐- Installed by H&H
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Apparatus BodyWorkstations: Locations☐- Front Right (Not for U.S.)☐- Front Left: (Not for U.S.)☐- Middle Right – HH RECOMMENDED☐-Middle Left – HH RECOMMENDED☐- Rear Right☐- Rear Left
Crosswalks: Location Options☐- Rear Cab (middle of truck) – HH RECOMMENDED☐- Rear Vehicle
Crosswalks: Material☐- Non Slip Surface☐- Diamond Plate☐- Epoxy Grit – HH RECCOMMENDED
Specify Desired Toolbox/Storage Specifications
Number of Toolboxes: _____________
Toolbox Sizes: L-_________ W-_________ H-____________
Toolbox Locations: ________________ ☐- Toolboxes on both sides below bed – HH RECOMMENDED
Toolboxes/Storage: Options
☐- Hinge Doors w/ Slam Latches☐- LED Lights in Box☐-In-Bed Tool Storage☐- Chemical Barrel Holders☐- Store Pick Poles and Hard Section
Front Bumper☐- OEM Front☐- Bulldog Custom – HH RECOMMENDED☐-Receiver Hitch
Front Bumper: Winch (if Applicable select type and material)☐-No Winch☐- Electric 15,000lb – HH RECOMMENDED☐- PTO Winch (specify lbs) __________________☐- Steel Cable☐- Synthetic RopeSpecify Desired Length (feet) ________________
5
Workstations vs. Crosswalks
Crosswalks function like a bridge between workstations, allowing the operator to travel
directly from one workstation to another. You may choose to have workstations not connected by crosswalks. The Rear Cab (middle) Crosswalk connects the two workstations in the middle of the truck directly behind the cab. A rear vehicle crosswalk connects two workstations at the rear
of the truck Rear crosswalks cannot always be accommodated due to apparatus and lack of
available space at the rear of the truck. Please inquire further with the H&H Bulldog
Department if necessary.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Apparatus Body (continued)Front Bumper: Finish☐- Diamond Plate☐- Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) _________________
Rear Bumper☐-OEM Rear☐-Bulldog Custom ☐- Receiver Hitch☐-HH Retractable Rear Bumper (Stow Away) – HH RECOMMENDED
Rear Winch Package ☐- No Winch – HH RECOMMENDED☐- Electric 15,000lb ☐- PTO Winch (specify lbs) _______________☐- Steel Cable☐- Synthetic RopeSpecify Desired Length (feet)_________________
Rear Bumper: Finish☐- Diamond Plate☐-Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) __________________
Other Apparatus Body Options☐- Quick Release Mud Flaps☐- Heavy Duty Head Board☐- Battery Auto Eject System☐-Aux 120 volt A/C System☐- Air Supply System☐- Air Auto Eject System☐- Main Battery Disconnect – HH RECOMMENDED
Location: ☐- In Cab ☐- On Battery Box
☐-Back – Up Camera☐- Forward Facing Camera☐- Grille Guard – HH RECOMMENDED☐- Hood Guard – HH RECOMMENDED☐- Body Guard – HH RECOMMENDED☐-Windshield Risers (nose to roof)☐- Tow Points Front and Rear
6
Rear Winch PackageDue to the amount of equipment and lack
of space on the back of a Bulldog a permanent rear winch cannot be
accommodated. To account for this, H&H has created a detachable rear winch
system. A Reese hitch is mounted on the rear of the truck, when desired the winch
can be fastened to the hitch and then detached when not in use. The winch is
stored in a custom built H&H winch storage box mounted to the truck.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Apparatus Body (continued)☐- Porta-Tank (Drop pool) Location: ☐- under truck (Complete HH Roller Mounted System 2200ga) – HH RECOMMENDED
☐-Top ( standard mounting) ☐- Side ( standard mounting) ☐- Side ( standard mounting) ☐- Other _________________
Size ___________________ Frame Material ______________________
Brand __________________
7
Apparatus Body Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
LightsWork Lights☐- LED Lights in Compartments – HH RECOMMENDED☐-LED Ground Lights (360° coverage)☐- LED Lights: illuminate all work platforms - HH RECOMMENDED☐- LED Lights: illuminate pump and valve area – HH RECOMMENDED☐- LED Lights: illuminate water gauge – HH RECOMMENDED
Scene Lights☐- Adjustable and Telescoping
Specify Location: __________________☐- Rear light on reverse circuit☐- Off-road LED bar front – HH RECOMMENDED☐-LED lights for front and angles – HH RECOMMENDED
Warning Lights☐- HH 360° (standard) – HH RECOMMENDED☐- Dual Color
Specify Colors: _____________________☐- Amber Traffic Advisor
Specify Mounted Location______________
8
Lights/Logos Notes/Comments:
Light Package Selection
☐- HH Standard Light Package
☐- Premium Brand Light Package
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
TankSize Options:☐- 500gal☐- 750gal☐- 1000gal☐- 1250gal☐- 1500gal – HH RECOMMENDED☐- 2000gal☐- Other
Specify: __________________________
Material Options☐- Poly – HH RECOMMENDED☐- Steel☐- Custom Steel
Additional Tank Options☐- Additional Foam Tank – HH RECOMMENDED: 30GAL☐- Top fills☐- Sight Glass (see through)☐- Skirted sides of tank☐- Digital Water Level Gauge – HH RECOMMENDED
Location: ☐- In Cab ☐- On Pump Panel ☐- At Work Station
☐- Baffle Balls
9
Tank Notes/Comments:
Maximum tank size on a 4 Door truck is 1,500 gallons.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
P ump
Power Options: Diesel Divorced Pump☐- 5-10hp☐-10-20hp☐- 20-30hp – HH RECOMMENDED (CET PFP – 25HP – DSL-MR)☐- 30-40hp
Power Options: Gas Divorced Pump☐- 5-10hp☐- 10-20hp☐- 20-30hp – HH RECOMMENDED (CET PRP-27HP-2D)☐- 30-40hp
Power Options: PTO Pump☐- PTO Trans Take-off☐- PTO Engine Take Off
Specify Desired GPM: __________________________
Pump Options: Maximum GPM Desired☐- GPM: 100-200☐- GPM: 200-300☐- GPM: 300-400☐- GPM: 400-600☐- GPM: 600-800☐- GPM 800-1200
Pump Options: Maximum PSI Desired☐- PSI: 100-150☐- PSI: 150-200☐- PSI: 200-250☐- PSI: 250-350☐- PSI: 400+
Additional Pump Options☐- Share fuel from truck tanks☐- All Stainless Steel/Brass for all plumbing☐- Y-Strainer w/ Ball Valve Flush for water☐- Drafting Primer☐- Separate Fuel Filter/Water Separator☐- Foam System (Scotty)
10
Divorced vs. PTO Pumps
HH recommends the use of Divorced Pumps on Bulldog 4x4 Truck.
Benefits of Divorced Pumps- Divorced pumps do not derive
their power from the truck’s transmission
- - Divorced pumps give you the ability to “Pump and Roll”
- Divorced Pumps are considerably less expensive than PTO Pumps.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Pump (continued)Pump Controls: Location Options**Start, Stop, Throttle, and Pressure Gauges☐- At Pump☐- Rear of Truck☐- Crosswalk☐- Inside Cab
Pump Controls: Inside Cab**If you have selected “Inside Cab” above as a desired pump control location please checkall of the following controls that you would like tohave inside the cab: ☐-Start & Stop☐-Throttle☐- Pressure Gauges
11
Pump Notes/Comments:
Up to two (2) locations may be selected for pump controls.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
PlumbingFire Hydrant Hook Up: Location☐- Driver Side Rear – HH RECOMMENDED☐- Passenger Side Rear
Fire Hydrant Hook Up: Specifications
Size: ________________________
Thread Male or Female: ____________________
2.5” Discharge to Fill: Specifications
Size: __________________________
Thread: ☐- Male or ☐- Female
Location: ☐- Front or ☐- Rear
Location: ☐- Left or ☐- Right
Discharge Connections for Work Stations: Size (select one)☐- 1” – HH RECOMMENDED☐- 1.5”☐- 2”
Discharge Connections for Work Stations: Location☐- Middle Cab Left Station☐- Middle Cab Right Station☐-Rear Left Station☐- Rear Right Station
Plumbing Options: Other☐- Quick Fill Hatch Top – HH RECOMMENDED☐-Hose Reel 100’ 1” – HH RECOMMENDED☐-Electric Retractable Reel☐- High Volume Dump Gate☐-Electric dump☐- Swivel DumpHose Type (specify): _______________________________
Fire Apparatus12
Plumbing Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Hose Reels☐- Hose Reels
Mount Location____________________☐- Electric Rewind☐- 1” x 100’ Mounted Above Pump – HH RECOMMENDED☐- 1.5” x 100’ Mounted Above Pump☐- Straight End – HH RECOMMENDED☐- Pistol End
Hose Type☐- Rubber☐- Reel Lite
Hose Bed☐- Hose Bed on Top of Tank – HH RECOMMENDED☐- Hose Bed Covered☐- Cascade Holder on Top of Tank
Hose Bed Cover: If selected above☐- Rolling Cover - HH RECOMMENDED☐- Canvas Cover☐- Custom HH Doors
Hose Bed Specifications: (If checked above)
Feet of Hose Required: ________________________
Hose Kind: ______________________
Chemical Barrel Holders
☐- Chemical Barrel Holders
Specify (If checked above)
Location: ________________________
Number of Barrels: ________________
13
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Fire Apparatus (continued)Front Corner Bumper Nozzles☐- Front Corner Bumper Nozzles – HH RECOMMENDED☐- Control outside Valve☐- In Cab Electric Valve Control – HH RECOMMENDED☐- Separate Right and Left Nozzle Controls
Front Remote Monitor☐- Front Remote Monitor System – HH RECOMMENDED☐- Tethered☐- WirelessSpecify desired GPM: ________________
Front Remote Monitor Brand Selection:☐- Akron☐- Task Force ☐- Elkhart
14
Front Remote Monitor System
HH recommends using a monitor with Fog Nozzle, quick disconnect and
stream shaper for the front remote monitor system.
Fire Apparatus Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet 5/5/2023
Pricing with Above Specifications
IMPORTANT NOTE: This is a simple non-binding quote EXAMPLE to provide a general idea of final truck pricing. Final pricing may vary depending on availability of base chassis and parts at the time of purchase. Final detailed quote can be obtained by contacting Howe & Howe Technologies and setting up a formal purchasing request. This quote does not include shipping.
15
TIER 1: NEW INTERNATIONAL CHASSIS (105K ALLOWANCE) 7400 4X4 RETAIL PRICE XXX,XXX USD
If ORDERED WITHIN 60 DAY DISCOUNTED PRICE XXX,XXX USD