WURTH AUSTRALIA SUPPORTING THE...
Transcript of WURTH AUSTRALIA SUPPORTING THE...
WURTH AUSTRALIA SUPPORTING THE
MAINTENANCE INDUSTRY
2 MAINTENANCE INDUSTRY
The Wurth Group is the world leader in assembly and fastening material. With over 400 companies in more than 80 countries and 67,000 employees, the Wurth group is growing each and every day. Defining solutions for more than 3 million customers worldwide is the daily responsibility of the organisation's 30,000 plus sales employees.
We are a family business – Local in every sense. People and a very special corporate philosophy are the driving forces of the long-standing success enjoyed by the Wurth Group. Wurth is a family business that was founded by Adolf Wurth in 1945. Prof. Reinhold Wurth, today’s Chairman of the Supervisory Board of the Wurth Group’s Family Trusts, took over the business at the tender age of 19 after his father had passed away and developed it further in to the business that we know and love today. Starting from the early years of the company in post-war Germany, he turned the former two-man business into a dynamic, worldwide operating trading group, generating in excess of EUR 10 billion in the business year of 2014.
From humble beginnings both internationally and locally, Wurth Australia strives to be a leader in its field. June 1982 saw the commencement of operations in a small office located in Braeside, Victoria – with a handful of motivated staff the business focused on delivering high quality products and service to a small number of customers throughout Victoria.
With rapid expansion, several office moves, industry diversification and additional distribution centres, Wurth Australia now proudly employ in excess of 550 people servicing our growing customer base of 48,000.Compared to early days of operation, Wurth Australia now operates in all areas of Australia, from remote regional areas to metropolitan centres, allowing for local market diversification.
CLOSECLOSER
WURTH “Competence, Quality and a Strong Customer Focus Underpin Everything we Do” Prof. Dr. h.c. mult Reinhold Würth
3MAINTENANCE INDUSTRY
We are…. Where the hammer falls; where the sparks fly; where products are drilled, glued, grinded and fastened. Wurth Australia provides operators, across a diverse range of industries, fast and convenient access to 10,000 active articles. Customers in automotive, construction, transport or the metal trade can access anything from a single bolt to a pallet of silicone quickly and conveniently. • Drilling, Deburring, Threading • Sawing, Cutting, Abrasives • Lubricating, Cleaning, Maintenance • Sealing, Bonding, Painting • Fasteners, Fixtures, Fittings • Electrical • Safety, Protection • Workshop Equipment • ORSY, Storage, Assortments • Air Tools, Power Tools • Hand Tools • Vehicle Service, Engine, Pneumatic, Hydraulic
Quality is much more than a word at Wurth, it is the backbone and overarching ethos in everything we do, from efficient internal processes, a commitment to our ISO9001 accreditation, to our product range, every Wurth product is rigorously tested to our exacting quality standards, both locally and internationally.
4 MAINTENANCE INDUSTRY
At Wurth, service & speed go hand in hand.In today’s fast paced, competitive operating environment, Wurth Australia not only understand and appreciate the need for systems, but also spearheads technology and innovation to create market orientated and customer centric solutions for managing consumables in organisations of all shapes and sizes. Starting at the staple solution of ORSY – Organised Systems where customers leverage the modular system of components to provide maximum process transparency, making it easier to manage and visually monitor consumable usage. ORSY continues to grow and be enhanced, tailoring the solution for customers of all sizes, with the recent introduction of ORSY Scan allowing customers to easily scan consumables and replenish via online solutions. This includes the opportunity to create customer specific ‘punch out’ catalogues that contain barcodes for easy and efficient scanning and customer specific pricing – all designed to increase operating efficiencies. Wurth Select caters for controlled environments with a particular focus on 24/7 operations. Wurth Select leverages vending machine technology, and combined with a suite of reporting it allows for consistent monitoring and automated replenishment. Wurth Intershop – State of the art technology that allows online purchasing and management of consumables. Customers can create custom designed workflows that allow for cost controlling within predetermined time frames. Customers can search the Wurth Australia range, viewing technical information, accessing Safety Data Sheets and create order templates for easy replenishment. Wurth In Time – Designed for just in time manufacturing, this Kanban style of delivery provides manufacturers and operators the right amount of consumables, based on scheduling and production demands. All lines are conveniently provided in Wurth designed bins that provide quick access to even the smallest of parts.
We are inspired by YOU! Wurth Australia depends on the success of its customers. The development and implementation of solutions that aim to enhance customers' environments is the priority of all staff.
To ensure staff are educated in the product range and aware of the solutions we can offer, Wurth Australia prides itself on providing staff, cutting edge, customer orientated training. This includes having an internationally leading Training Academy, located in Melbourne, Australia. This training academy plays home to all staff within their initial phase of their Wurth career, ensuring they are fluent and aware of all Wurth solutions and the corporate philosophy of the global leader in assembly and fastening material.
The commitment to excellence in customer service and exceptional quality products is what sets Wurth Australia apart from the competition. All staff love selling, selling directly to customers, in person, so that each solution is personalised to service the individual. At Wurth Australia, the team understands that every customer is different.
5MAINTENANCE INDUSTRY
We are where you are… Serge Oppedisano is regarded as a visionary leader with a strong commitment to service excellence and innovation.
Some of Serge’s key principles include mentoring and coaching every member of his team to exceed their sales plan and reach their full potential. Serge loves connecting with people at all levels and treating them as equals, irrespective of their status in life. His empathetic nature and his desire to develop close relationships with his staff and customers, remains central to his leadership and management style. This style is enhanced by the values instilled in him by his father, one of respect, honesty, hard-work and a visionary perspective. As CEO, Serge has leveraged his passion for innovation by implementing world leading enterprise and mobility solutions to the Australian business, colloquially known as ‘Speedy’. As a result of Speedy, over 400 sales professionals across Australia have real time customer data at their fingertips via iPads. Serge has leveraged the learnings of Speedy by introducing the ‘next generation’ of integrated E-Commerce platforms to Wurth Australia in order to connect Enterprise customers with Wurth Australia’s distribution systems, enabling customers to access ‘real time’ inventory data and procurement capabilities – ultimately improving productivity and service for customers. Today under Serge’s leadership, Wurth Australia is at the forefront of Wurth Line companies within the Asia Pacific Region. The vision is to deliver $200 million in sales for the Wurth Group in Australia. According to Serge, the excellence in customer service, coupled with proactive customer relationships and exceptional, quality products are what sets Wurth apart from its competitors. In addition, Serge promotes a culture that loves personal selling, which includes treating every customer as an individual with unique tailored requirements. In accordance with the Wurth Philosophy, there is not one Wurth for all customers, instead every customer has their own Wurth.
Serge Oppedisano Chief Executive Officer Managing Director Australia and New Zealand Member of the Asia Pacific Strategy Board
6 MAINTENANCE INDUSTRY
Wurth Australia's industry leading drilling range. The Wurth drilling tools are number one in the industry. The quality and innovative design ensure that they cannot be compared with competitor products and prove to be a workshop's best solution, time and time again. Productivity and efficiency are key when drilling through all types of surfaces and Wurth offer a wide range of drilling tools that would suit almost any application.
The drilling range is available as single units, cassette case kits and also in ORSY assortments for the Wurth ORSY system, ensuring that there is a product solution for every business; small, medium or large.
DRILLING 01
7MAINTENANCE INDUSTRY
Art. No. 0626 001* HSCO TWIST DRILL BITS – METRIC
Art. No. 0964 632 901 B2000 HOLESAW HSS BI-METAL DESIGN ASSORTMENT
DIN 338
Technical Details:• Tip angle of 130°C.• Taper jacket grinding finish.• Side chip angle 35°C.• From diameter 13.0mm shank reduced to 12.7mm.• For drill depths up to approx. 4 times the diameter.
Cat. Page 02 0601
Dia.mm
Total Lengthmm
Flute Lengthmm
Art. No. Pack Qty.
10.0133 87
0626 001 000
1
10.2 0626 001 02011.0 142 94 0626 001 10012.0
151 1010626 001 200
13.0 0626 001 30014.0 160 108 0626 001 400
Cat. Page 10 2038
Similar to DIN 1897.
• Right hand cutting.• Single twist and short in length.
Ø mm Length mm Twist Length mm Art. No. Pack Qty.3.2 49.0 11.2 0636 32
1/103.3 49.0 11.2 0636 334.0 55.0 14.0 0636 404.1 22.0 14.0 0636 415.0 62.0 17.0 0636 50
Art. No. 0636* DOUBLE ENDED TWIST DRILLS HHS
The HSS bi-metal construction allows for a fast and clean cut.• Suitable for all steel materials including cast iron, copper, bronze,
aluminium, plastic and wood.• Diametral pitch: 6 teeth inch, Depth of cut: 32mm• The use of cutting oil is recommended.• 16 piece assortment.
Dimensions Art. No.19, 22, 25, 32, 35, 38,44, 51, 57, 64, 68, 76 0964 632 901
Drilling
Cat. Page 02 0641
8 MAINTENANCE INDUSTRY
Premium split point HSS Bright Finish drill bits. A truly universal drill bit for all your most demanding applications • Fully precision ground from premium M2 high speed material.• Drill bits undergo high temperature heat treatment creating a hard
wearing multipurpose drill.• The 118 degree split point provides for a self-centring tip. This reduces
drill ‘wander’ and allows for precise hole placement, particularly when hand drilling.
• The split point and precision machining also creates smaller chips while drilling, offering better swarf extraction and a safer work environment.
• The 118 degree angle is the optimum angle for high drilling performance in a variety of materials
• The bright finish of the drills means a less porous surface and better swarf extraction. This makes the drill bit more suitable for a wide range of materials without clogging near the cutting edge and in the flutes.
• HSS drill bits are ideal for use in a wide range of materials including ferrous based metals, non-ferrous materials, timber and plastic.
• The Wurth bright premium drill bits are fully ground so you can be certain that every drill you use will be perfectly round and is manufactured to the highest standards
• DIN 388
Contents Art. No. Pack Qty.
25 pieces from dia. 1.0 - 13.0mm at 0.5 mm intervals. (Cassette case)
0624 090 004 1
19 pieces from dia. 1.0 - 10.0mm at 0.5mm intervals. (Cassette case)
0624 090 001 1
Contents Art. No. Pack.Qty.
10 each dia. 1.0 - 6.0 x 0.5mm5 each dia. 6.5 - 10.5 x 0.5mm = 155 pieces. (ORSY 100 Case)
0624 090 005 1
Cat. Page 02 0522 PREMIUM BRIGHT - METRIC SETS
Drilling
Use this handy QR code to view our Bright Drill Bit Product Demonstration, or visit www.wurth.com.au
9MAINTENANCE INDUSTRY
Multipack, 12 pieceConsisting ofQty.
Dimensions in mm Art. No. Pack Qty.
3432
6 x160/100 8 x160/10010 x160/10012 x160/100
0648 000 002 1
Newly developed innovative 4-spiral hammer drill with SDS-plus mounting shaft, centreing tip and 4-edge all-carbide element for considerably more precisely drilled holes.
Hammer drill box, 7-pieceContent: Art. No. Pack Qty.1 piece each dia. 5x110/50, 6x110/50, 8x110/50, 6x160/100, 8x160/100, 10x160/100 and 12x160/100
0648 000 003 1
Dia.
in mm
TotalLengthin mm
Working Lengthin mm
Art. No. Pack Qty.
5110 50 0648 005 011
2/10160 100 0648 005 016
5.5110 50 0648 005 511160 100 0648 005 516
6
160 100 0648 006 016 2/10/50210 150 0648 006 021
2/10260 200 0648 006 026310 250 0648 006 031 1
6.5
160 100 0648 006 516 2/10210 150 0648 006 521
2260 200 0648 006 526310 250 0648 006 531 2/10
8
160 100 0648 008 016 2/10/50210 150 0648 008 021
2/10
260 200 0648 008 026310 250 0648 008 031
10
210 150 0648 001 021260 200 0648 001 026310 250 0648 001 031450 400 0648 001 045 1
12
210 150 0648 001 2212/10
260 200 0648 001 226310 250 0648 001 231
1450 400 0648 001 245
14
210 150 0648 001 421 2/10260 200 0648 001 426
1310 250 0648 001 431450 400 0648 001 445
16
210 150 0648 001 621
1
260 200 0648 001 626310 250 0648 001 631450 400 0648 001 645
18250 200 0648 001 825450 400 0648 001 845
20250 200 0648 002 025450 400 0648 002 045
22250 200 0648 002 225450 400 0648 002 245
24 450 400 0648 002 44528 450 400 0648 002 84530 450 400 0648 003 04532 450 400 0648 003 245
Drilling
Cat. Page 02 0692 LONGLIFE HAMMER DRILL WITH QUADRO DRILL HEAD
10 MAINTENANCE INDUSTRY
Properties:Tool life: ●●●●Drilling speed: ●●●●Drilled-hole quality: ●●●●Versatility: ●●●●Drilling behavior: ●●●●Drilling depth: 5 x drill bit dia.
Applications:tropical woods such as bangkirai, hardwoods, softwoods, fiberboards, plastic-coated fiberboards, laminates, soft plastics, hard plastics
Dia. in mm Total length in mm Chip flute length in mm
Art. No. P. Qty.
3.0 61 33 0650 810 300
1
4.0 75 43 0650 810 400 5.0 86 52 0650 810 500 6.0 93 57 0650 810 600 7.0 109 69 0650 810 700 8.0 117 75 0650 810 800 9.0 125 81 0650 810 900
110.0 133 87 0650 811 000
The hardwood professional for optimum centering and chip removal
• Precision-ground centering tip with two roughing taps.
• Special groove geometry and double bevel.• Extremely low production tolerances with
precisely defined surface and profile quality.• Cutting edges sharpened like a knife.• Double bevel.
Also available in an assortment!
Cat. Page 02 0715 HSCO WOOD TWIST DRILL BITS
Drilling
The problem solver even for extremely hard stoneware tiles to Mohs-/scratch hardness 9 as well as glass and porcelain.
Specially designed carbide plates geometry (multi-surface precision grinded tip).• Precide drilling.• Accurate and burst-free drilling.
Dry DrillingNo cooling required.
Applications• Rotary drilling in stoneware tiles, tiles, glass
(no seure glass) and porcelain.• Ideal for electric and cordless drill machines.
Product RangeDrill Dia.in mm
Total Lengthin mm
Shaft Dia Art No. Pack Qty.
6 11710
0641 406 01118 119 0641 408 011
10 122 0641 401 011
Cat. Page 02 0674 BRICK & TILE DRILL BITS
Non-impact
Set also available.Art. No. 0641 400 003
Contents of setOne each of 6, 8 and 10mm diameter
Art. No. 0650 810 001
11MAINTENANCE INDUSTRY
ABRASIVES 02CUT & GRINDWurth Australia provides an extensive range of cutting and grinding discs. Ask us about our full range TODAY!
12 MAINTENANCE INDUSTRY
Art. No. 0669* CUT-0FF DISCS
Art. No. 0664* SPEED CUT-OFF DISCS DISCS
Abrasives
Ø x Thickness mm Hole mm Design Max. min–1 Art. No. Pack Qty. 50 x 1.0
6.030,500 0664 130 501*
50 60 x 1.0 25,000 0664 130 601* 76 x 1.0 10.0 20,100 0664 130 761*115 x 1.0
22.2
13,300 0664 131 150
25
115 x 1.6 13,300 0664 131 151125 x 1.0 12,200 0664 131 250125 x 1.6 12,200 0664 131 251180 x 1.6 8,500 0664 131 801230 x 1.9 6,600 0664 132 301230 x 2.5 6,600 0664 132 302
Cut-Off Disc
Green for Stainl. Steel
Areas of Application:Cut-off work on pipes, ventilation ducts, metal sheets, (e.g. containers, sheet metal constructions), pipe sys tems, bars, steel reinforcements, profiles and rails (for bathrooms), cable trays and ducts, high-voltage cables, steel rope, composite materials, plastics, etc.
• Free from iron, chlorine and sulphur (≤ 0.1%).
• Meets KWU class II (e.g. for pipe system and reactor engineering).
Cat. Page 03 1022
Cat. Page 03 1028
Dimensions mmDia. x Thickness
Boremm
DesignMax. rpm
Art. No.
100 x 1.016 15,300
0669 231 001100 x 2.5 0669 101 025115 x 1.0
22.2
13,3000669 231 152
115 x 2.5 0669 101 155125 x 1.0
12,2500669 231 252
125 x 2.5 0669 101 255180 x 2.5 8,500 0669 101 825230 x 2.5 6,650 0669 102 325350 x 2.5
25.44,400
0669 103 502355 x 3.8 0669 103 553405 x 3.0 3,850 0669 104 053
High performance cut-off discs. Blue for Steel. Green for Stainless Steel.
• Reinforced with high-grade fabric (fibre-reinforced) for maximum fracture resistance.
• Synthetic resin bonding makes the wheels impact resistant.
13MAINTENANCE INDUSTRY
• Synthetic resin-bound, fibre-reinfor ced, high performance grinding discs.
• For freehand grinding with electric or compressed air angle grinders.
• An all-round harder disc.
• Very low incidence of breakage. • Minimal measurement and imbalance
tolerances. • Maximum peripheral speed 80 m/s.• Particularly long service life combined with
good metal-removing properties.• Discs meet the high safety requirements of
the European standard EN 12413 and of the OSA (Organisation for the Safety of Abrasives).
• Reinforced with high-grade fabric (fibre-reinforced) for maximum fracture resistance.
• Synthetic resin bonding makes the wheels impact resistant.
• Can be used for steel and iron.• Cool running, low noise.
• Low dust.• Complies with the most demanding safety
requirements of European Standard EN12413.
Ø x Thickness mm Hole mm Design Max. min–1 Art. No. Pack Qty.125 x 7.0 22.2 12,200 0670 171 257 25
Grinding Disc Yellow for Non-ferrous Metals/Aluminium
Areas of Application:For the grinding of cast-ons, casting skin and edges, and preparing weld seams, etc.
Cat. Page 03 1501 LONGLIFE GRINDING DISCS
Art. No. 0669* GRINDING DISCS
Cat. Page 03 1502
Abrasives
Grinding Disc Blue for Steel
Areas of Application:Grinding of edges, deburring, dressing of weld seams, etc.Ø x Thickness mm Hole mm Design Max. min–1 Art. No. Pack Qty.115 x 7.0
22.2
13,300 0670 161 15725125 x 7.0 12,200 0670 161 257
230 x 8.0 6,600 0670 162 308
Dimensions mmDia. x Thickness
Boremm
Design Max. rpm Art. No. Pack Qty.
100 x 6.0 16 15,300 0669 261 006
25115 x 6.0
22.2
13,300 0669 261 156125 x 6.0 12,250 0669 261 256180 x 6.0 8,500 0669 261 806230 x 7.0 6,650 0669 262 307 10
Grinding Disc Green for Stainless Steel
Areas of Application:Grinding of edges, deburring, dressing of weld seams, etc.
Ø x Thickness mm Hole mm Design Max. min–1 Art. No. Pack Qty.125 x 7.0 22.2 12,200 0670 181 257 25
Iron, chlorine and sulphur-free (≤ 0.1%). Meets KWU class II (e.g. for pipe system and reactor engineering).
14 MAINTENANCE INDUSTRY
With Fibre Backing Disc:• Backing disc made of several layers of fibre glass, curved design.
With Zirconium Corundum Grain.
Suitable for stainless steel.• Very long service life due to hard zirconium corundum.• Excellent grinding properties until the end of the service life.• Discs can be used up to 100%.• Self sharpening of the lamella, therefore no clogging.
Cat. Page 03 1591 LAMELLA FAN GRINDING DISCS
Abrasives
Dia.mm
Bore Dia.mm
Max.r.p.m.
Grit Curved
Art. No.
100 16 15,300
40 0579 430 30460 0579 430 30680 0579 430 308120 0579 430 301
115
22.2
13,300
40 0579 430 31460 0579 430 31680 0579 430 318120 0579 430 311
125 12,200
40 0579 430 32460 0579 430 32680 0579 430 328120 0579 430 321
178 8,60040 0579 430 37460 0579 430 37680 0579 430 378
Revolutionary development allows you to see your work.
• See the material being processed through the disc – allowing you more control.
• Prevents undesired excessive grinding and the need for reworking.
Dia.mm
Bore Dia,mm
max.r.p.m.
Grit Curved
Art. No.
125 22.2 12,20040 0578 812 54060 0578 812 56080 0578 812 580
Cat. Page 03 1585 SLOTTED ‘SEE-THROUGH LAMELLA GRINDING DISCS
15MAINTENANCE INDUSTRY
Cat. Page 03 1633 VULCANISED FIBRE GRINDING DISCS
Grain Ø 100 mm Ø 115 mm Ø 125 mm Ø 180 mm Pack Qty.Art. No. Art. No. Art. No. Art. No.
P 16 - - 0580 126 16 0580 181 16
25/50
P 24 0580 101 24 0580 116 24 0580 126 24 0580 181 24P 36 0580 101 36 0580 116 36 0580 126 36 0580 181 36P 60 0580 101 60 0580 116 60 0580 126 60 0580 181 60P 80 0580 101 80 0580 116 80 0580 126 80 0580 181 80P 100 - 0580 116 100 0580 126 100 -P 120 0580 101 120 0580 116 120 0580 126 120 0580 181 120
High quality Aluminium Oxide fibre disc.
• High quality, heavy vulcanised fibre discs, 0.8mm thick.
• Thick corundum coating (Aluminium Oxide).• Synthetic resin bound.• 22mm hole, (Diameter 100mm has 16mm
hole).• Aggressive grain for: – highest possible grinding properties. – even grinding – no clogging due to dust repellent coating. – long service life.• No breaking out of the grain.• No breaking or tearing at the edges during
grinding.• Maximum operating speed: 80 m/s.
Abrasives
A Zirconic Corundum topsize fibre disc with outstanding grinding results and long service life.
Electrostatic dispersion.• Constant removal rates.
Special Zirconic Corundum coating with cooling multi-bonding and active grinding fillers.• Aggressive grinding power.• Cool grinding - no tarnishing of workpieces.• Long service life.• Low noise level.• High self-sharpening effect of abrasive grain.
22mm hole, with cross recess.
Suitable for grinding the following materials:Corrosion-resistant and high-temperature steels (stainless steel), carbon steels, forged steel, non-ferrous metals, chromium and nickel alloys and grey castings.
Grain Ø115mm Ø125mm Ø180mm Pack Qty. Art. No. Art. No. Art. No.
36 0580 511 536 0580 512 536 0580 518 036
25/5060 0580 511 560 0580 512 560 0580 518 06080 0580 511 580 0580 512 580 0580 518 080120 0580 511 512 0580 512 512 -
16 MAINTENANCE INDUSTRY
Cat. Page 03 1001 - 2 DIAMOND CUT-OFF WHEELS
Abrasives
For Construction.• Excellent standard wheel for use at construction sites with changing
materials.• For dry and wet cutting.• Closed cutting edge.• Newly developed embossing - main blade embossed on 230 mm dia.
wheels.• Cooling holes. - Improved heat dissipation. - Extremely smooth running. - No wheel wobble or flutter. - Very clean cutting.• Not suitable for ceramic tiles.• Hole Dia 22.23mm• Segment connection: Sintered• Max. circumferential speed 80 m/s.
Dia.mm
SegmentHeight
Segment Thick.
Max.rpm.
Art. No.
1157.5mm
2.0mm13,300 0668 765 115
125 12,200 0668 765 125230 2.8mm 6,600 0668 765 230
Longlife - For Construction.• Long life diamond cutting wheel for tile, paving and brick layers,
plumbing companies, stone cutters and similar trades.• Optimized cutting quality. The fine segment structure enables a clean
cut.• Suitable for: angle grinders, stationary saws/table saws.• The Wurth construction site wheel is an ideal balance between function
and versatility.• A segment height of 10 mm ensures an extra long service life.• Max. circumferential speed 80m/s.• For material thicknesses up to approx. 20 mm.• Segment Connection: Laser• Segment Height: 10mm
Dia.mm
Hole mm
Segment Thickness mm
No. of segments
Max. rpm
Art No.
115 22.23 2.1 9 13300 5527 140 115125 22.23 2.2 10 12250 5527 140 125230 22.23 2.4 16 6650 5527 140 230350* 30/25.4** 3.2 19 4400 5527 140 350
* Stationary saws / table saws** With driver hole
Features:Versatility: ••••oService life: ••••oCutting speed: •••o oCutting quality: ••••o
For dry and wet cutting.
17MAINTENANCE INDUSTRY
Colour Code System:Using the 4 very different colours you will always find the right sabre saw blade for your application.
Star System:Three application-optimised quality stages. • Exactly the right strip saw blade for every
application.Optimum combination of material, tooth pitch and saw blade. • Excellent cut results.
Wood Metal Constr./ Stainless Universal steel
*** High performance Saw Blade for extreme applica tions, high cutting performance and long service life.
** Very good blade for more demanding applications.
* Good standard blade for conventional applica tions.
Special Blades for Special Areas of Application: Heavy Duty for solid, thick workpieces of 3-10 mm. Ideal for more demanding applications,
e.g. thick metal sheets and pipes. Demolition for demolition and rescue work, material thickness 4-12 mm. Ideal for working
with a pipe bracket. A right-angled cut is ensured by the extremely thick blade thickness of 1.6 mm.
Multi Blade with progressive tooth pitch for thin and thick materials for particularly fast cutting.
Tooth pitch in mm
1.0 Metals, Metal Sheets, Pipes and Profiles < 1.5 mm
1.4 Metals, metal sheets, pipes and profiles < 3.0 mm
1.8 Metals, metal sheets, pipes and profiles 3-8 mm
1.8-2.6 Metals, metal sheets, pipes and profiles 3-10 mm
2.9-3.2 Metals, pipes and profiles 4-12 mm
1/2” Universal shaft to fit in sabre, Recipro and Tiger saws manufactured by Würth, Atlas Copco, Black & Decker, Bosch, DeWalt/Elu, Fein, Flex, Hitachi, Holz-Her, Makita, Metabo, Millers-Falls, Milwaukee, Rems, Ridgid, Rockwell, Roller and Skil.
Colour Code System:Thanks to the 4 easily distinguishable colours, you will always find the right jigsaw blade for your application.
Star System:Three application optimised quality stages. • Exactly the right jig saw blade for every
application.The perfect combination of material, tooth pitch and saw blade. • Phenomenal cutting results.
*** High Performance Saw Blade • high cutting performance and
long service life.
** High Quality Jigsaw Blade for meeting tough requirements.
* Good Standard Blade for conventional applica tions.Cooling extends the service life of your
Wurth jig saw blades.
Special Blades: Multi Blade with progressive tooth pitch for thin and thick materials and particularly fast and
clean cutting.• Superb blade for use on the construction site, as the same blade can be used for all situations. The advantage for you: Saves time, as no need for lengthy blade-changing operations.
Abrasives
Ask me about blades...!
Cat. Page 03 0561 JIG SAW BLADES
Cat. Page 03 0521 SABRE SAW BLADES
Wood Metal Construc-tion/
Universal
Plastic Stainless steel
18 MAINTENANCE INDUSTRY
60 Second Registration
Customised Ordering
Approved Mechanisms
& Control
Barcode Scanning & Catalogue
Fast Access to Technical
Data
E-Procure-ment
OrderTemplates
OrderHistory
E-BUSINESSWITH WURTHSHOPPING MADE EASY
19MAINTENANCE INDUSTRY
FOOD SAFEPRODUCT RANGE 03
20 MAINTENANCE INDUSTRY
Food Safe Range
HACCP APPROVED
Wurth and HACCP Australia Being an industry leading supplier of quality products to the local food industry, Wurth Australia is proud to offer HACCP accreditation on an ever growing number of our products!
Who are HACCP Australia? HACCP Australia is the leading accreditation body in the country and offer a highly recognised certification mark for non-food products and services that are designed for the food and care industries. Products with a high standard of food safety, such as those offered by Wurth, carry this certification mark to identify a products’ ‘fitness for purpose’ within operations governed by a HACCP program. HACCP Ratings FZP Food Zone Primary - suitable for use in the food zone and can make contact with food.
FZS Food Zone Secondary - suitable for touching food contact surfaces but not food.
SSZ Splash or Spill Zone - suitable for use in food handling areas but not to make direct contact with food. Easy Access! You can rest assured in the fact that we provide hassle free, 24/7 access to MSDS and certification including both HACCP and NSF where applicable.
Speak to us today about our full range of certified solutions!
HACCP
21MAINTENANCE INDUSTRY
Products with the NSF logo have been tested and registered by the NSF. The NSF is the largest international conformity assessment body which assess and certifies products for use in the food processing industry so as to minimise health risks to the general public. NSF registration certificates are available on the Wurth website under the “products” tab, under the link “Chemical Certificates”.
NSF Ratings H1 May make incidental contact with foodstuffs. H2 May be used in a food production environment but must not make contact with foodstuffs. K1 Can be used as a cleaner containing solvents. A1 Aqueous basic cleaner. A7 Aqueous cleaner for metal. P1 Various applications.NSF/ANS161 Drinking water sytem components.
Certification Matrix of Food Safe ProductsArticle Number Description NSF HACCP
0893 130 Rost Off Crafty H2 SSZ
0893 121 2 Powerful Stainless Steel Cleaner A1 SSZ
0893 121 1 Metal Restorer A1, A7 SSZ
0890 109 6 Multiclean H1, K1 -
0893 107 002 Multipurpose Grease III H1 FZS
0893 107 003 Multipurpose Grease IV H1 FZS
0893 107 1 Food Safe Lubricating Oil H1 FZS
0893 221 000 Silicone Fluid H1 FZS
0893 056 Multi Plus H1 FZS
0893 107 6 Foodstuffs HHS H1 FZS
0893 577 050/0893 511 250 DOS Pipe Sealant ANSI 61 -
0893 243 050 DOS Thread Lock - Medium Strength ANSI 61 SSZ
0893 270 050 DOS Thread Lock - High Strength ANSI 61 SSZ
0892 550 1/2/3/4 Silicone Acetate Food Grade ANSI 61 FZP
0893 121 Stainless Steel Care Spray - SSZ
0893 121 0 Stainless Steel Care Oil - SSZ
0893 235 1/3 KD Bond & Seal Power P1 SSZ
0893 123 HSP 1400 H2 -
0893 140 Industry Cleaner K3 -
0890 107 Power Cleaner K1 -
0893 090 030 Super Fast Glue Easy Pen P1 -
0893 09 Super Fast Glue P1 -
0893 603 050 High Strength Bearing Retainer P1 -
0893 574 050 Flange Sealant Orange P1 -
0893 573 050 Flange Sealant Green P1 -
0890 900 90 Universal Cleaning Wipes C1 -
Various ORSY & ORSY 100 - NFZ
NSF APPROVEDNSF
Food Safe Range
22 MAINTENANCE INDUSTRY
COMPETITOR COMPARISON MATRIX
Food Safe Range
Article No. Description Competitor
Rocol Fuchs CRC INOX Bel Ray Lubrication Engineers
Loctite
0893 130 Rost Off Crafty FOODLUBE
Dismantling
Spray
- Penetr8 - - - -
0893 121 2 Powerful Stainless Steel Cleaner - Rivolta S.L.X.
Rapid
FG Aquasafe
Cleaner/
Degreaser
- - - -
0893 121 1 Metal Restorer - - - - - - -
0890 109 6 Multiclean Contact
Cleaner
Rivolta S.B.C. - - - - ODC-Free
Cleaner &
Degreaser
0893 107 002 Mulitpurpose Grease III FOODLUBE
ULTRA
Cassida
Grease RLS 1
- MX6FG No-Tox Food
Grade Clear
Grease
- -
0893 107 003 Multipurpose Grease IV FOODLUBE
PREMIER
Cassida
Grease RLS 2
- MX4G No-Tox FG
AR Grease
Quinplex
White Gear
Lubricant
Loctite FG
Grease
0893 107 1 Food Safe Lubricating Oil - - FG
Penetrating
Oil
- No-Tox FG
Oil
Quinplex
White Oil
-
0893 221 000 Silicone Fluid - Reniso Triton
SEZ 32
Food Grade
Silicone
- No-Tox FG
Silicone
Lubricant
Spray
- -
0893 056 Multi Plus - - FG Machine
Oil
MX3FG No-Tox
Food Grade
Multipurpose
Lubricant
Spray
Quinplex
Synthetic
Food Grade
Oil
-
0893 107 6 Foodstuffs HHS FOODLUBE
Chain Fluid
- Food Grade
Chain Lube
- No-Tox
FG Chain
Lubricant
- -
0893 577 050 DOS Pipe Sealant - - - - - - QuickStix
561 PST Pipe
Sealant
0893 243 050 DOS Thread Lock - Medium
Strength
- - - - - - Loctite 243
0893 270 050 DOS Thread Lock - High Strength - - - - - - -
0892 550 1/2/3/4
Silicone Acetate Food Grade - - - - - - -
0893 121 Stainless Steel Care Spray - - - - - - -
0893 121 0 Stainless Steel Care Oil - - - - - - -
0893 235 1/3 Bond & Seal Power - - - - - - -
23MAINTENANCE INDUSTRY
Art. No. 0893 130 ROST OFF CRAFTYSynthetic, biodegradable high-performance rust remover.
• Contains synthetic oil.• Optimum creeping and lubricating effect.• Biodegradable.• Extreme capillary activity ensures extremely fast penetration of rust and
corrosion.• Can be used in areas in which food is processed or stored; however,
direct contact of product with food must be prevented.• Excellent material compatibility; in contrast to many conventional rust
removers, does not attack rubber or plastic.• Optimum corrosion protection thanks to corrosion protection additives.• Resin and acid-free.• Silicone-free.
Description Cont. Cat. Page Pack Qty.Aerosol can 300 ml 04 0551 1/3/6
NSF H2 registered, (No: 124179) corresponds to the requirements of H1, 1998.
HACCP SSZ Certified: PE-717-WA-01.
Art. No. 0893 121 2 POWERFUL STAINLESS STEEL CLEANERSpecial cleaning fluid for preliminary cleaning of metal surfaces.
• Powerful removal of oil and grease.• Does not contain phosphates, organic solvents or acids.• Gentle on material.• > 95 % biodegradable.• Neutral colour and odour.• pH-value undiluted: 9.0–9.5.• AOX and silicone free.
Description Contents Cat. Page Pack Qty.Spray Bottle 500ml 04 4188 1/6/12
HACCP SSZ Certified: PE-717-WA-01.
NSF registration No. 135874, A1 - acceptable for use as a general cleaner on all surfaces in and around food processing areas where it is not intended for direct contact with foodstuffs.
Food Safe Range
Article No. Description Competitor
Rocol Fuchs CRC INOX Bel Ray Lubrication Engineers
Loctite
0893 130 Rost Off Crafty FOODLUBE
Dismantling
Spray
- Penetr8 - - - -
0893 121 2 Powerful Stainless Steel Cleaner - Rivolta S.L.X.
Rapid
FG Aquasafe
Cleaner/
Degreaser
- - - -
0893 121 1 Metal Restorer - - - - - - -
0890 109 6 Multiclean Contact
Cleaner
Rivolta S.B.C. - - - - ODC-Free
Cleaner &
Degreaser
0893 107 002 Mulitpurpose Grease III FOODLUBE
ULTRA
Cassida
Grease RLS 1
- MX6FG No-Tox Food
Grade Clear
Grease
- -
0893 107 003 Multipurpose Grease IV FOODLUBE
PREMIER
Cassida
Grease RLS 2
- MX4G No-Tox FG
AR Grease
Quinplex
White Gear
Lubricant
Loctite FG
Grease
0893 107 1 Food Safe Lubricating Oil - - FG
Penetrating
Oil
- No-Tox FG
Oil
Quinplex
White Oil
-
0893 221 000 Silicone Fluid - Reniso Triton
SEZ 32
Food Grade
Silicone
- No-Tox FG
Silicone
Lubricant
Spray
- -
0893 056 Multi Plus - - FG Machine
Oil
MX3FG No-Tox
Food Grade
Multipurpose
Lubricant
Spray
Quinplex
Synthetic
Food Grade
Oil
-
0893 107 6 Foodstuffs HHS FOODLUBE
Chain Fluid
- Food Grade
Chain Lube
- No-Tox
FG Chain
Lubricant
- -
0893 577 050 DOS Pipe Sealant - - - - - - QuickStix
561 PST Pipe
Sealant
0893 243 050 DOS Thread Lock - Medium
Strength
- - - - - - Loctite 243
0893 270 050 DOS Thread Lock - High Strength - - - - - - -
0892 550 1/2/3/4
Silicone Acetate Food Grade - - - - - - -
0893 121 Stainless Steel Care Spray - - - - - - -
0893 121 0 Stainless Steel Care Oil - - - - - - -
0893 235 1/3 Bond & Seal Power - - - - - - -
24 MAINTENANCE INDUSTRY
Art. No. 0890 109 6 MULTICLEAN
Contents in ml Cat. Page Pack Qty. 400 04 0511 1/3/6
Fluid for cleaning and temporary lubrication in physiologically and ecologically sensitive areas.
In this context, the product may come into contact with foodstuffs for technical reasons.
• Good cleaning and degreasing performance. Removes oils, resin encrustations and silicone residues.
• Suitable for use in physiologically and ecologically sensitive areas.
• Safe working.• Good material compatibility.• Acetone-free• AOX and silicone-free.
Art. No. 0893 121 1 METAL RESTORER
Contents Cat. Page Pack Qty. 400g 04 4182 1
Metal grinding paste for the removal of stubborn dirt from metal.• Contains activated citric acid.• Use of natural alumina as abrasive agent.• Protective additives and re-greasing
properties.• Highly viscous.• Not subject to mandatory identification
according to hazardous goods directive.• Made with natural raw materials.• pH-Value: 1.6.• Density: 1,4 kg/l.
Before After
HACCP SSZ Certified: PE-717-WA-01.
NSF A1 registered(No. 135792), corresponds to the requirements of USDA A1, A7.
NSF H1, K1 registered (No: 135926), corresponds to the requirements of USDA 1998 H1.
Food Safe Range
25MAINTENANCE INDUSTRY
Art. No. 0893 107 00* MULTI-PURPOSE GREASE III/IVPhysiologically safe grease with multi-functional additive combination.
In this context, the product may make incidental contact with foodstuffs for technical reasons.
• Good adhesive properties.• Stable against working and oxidation-resistant.• Supports the quality of the seal. • Dust and water-repellent.
Description Contents in ml
Art No. Pack Qty.
Multi-Purpose Grease III 400 0893 107 0021/3/6Multi-Purpose Grease IV 400 0893 107 003
Cat. Page 04 2505
NSF H1 registered (No: 135924 & 135928), corresponds to the requirements of USDA 1998 H1.
HACCP FZS Certified: PE-715-WA-01.
Art. No. 0893 107 1 FOOD SAFE LUBRICATING OIL
Penetrating, transparent special lubricant designed for the food processing and beverage industry. In addition to pharmaceutical and medical applications. Liquid, penetrating and transparent special lubricant.• Outstanding lubricating properties in hard to reach places due to low
viscosity.• Excellent creep and cleaning effect guarantees best protection for
water-exposed machinery and conveying equipment.• No visual impairment through occasional contact between lubricant
and product, neutral odour and taste.• Temperature stable from –10°C to 180°C.• Water displacing.
Contents Cat. Page Pack Qty.300 ml 04 0521 1/6/12
NSF H1 registered, (No: 126582) corresponds to the requirements of H1, 1998.
HACCP FZS Certified: PE-715-WA-01.
Food Safe Range
26 MAINTENANCE INDUSTRY
Art. No. 0893 221 000 SILICONE FLUID
High-quality, physiologically safe anti-friction and release agent.In this context, the product may come into contact with foodstuffs for technical reasons.• Contains highly concentrated, high-quality silicone oils.• Optimum anti-frictional and lubricating properties.• Eliminates unpleasant squealing noises.• Extremely good temperature resistance from -50°C to 250°C.• Especially user-friendly and safe handling.• Improved workplace safety and health protection.• Reduced marking with danger symbols. • Moisture repellent, e.g. protects rubber parts against frost.
Contents in ml Cat. Page Pack Qty.400 04 0532 1/3/6
Art. No. 0893 056 MULTI PLUS
Synthetic, physiologically safe multi-function spray with high-end properties for universal use.
A product for a broad spectrum of applications.· Rust penetrating agent with creeping properties.· Wear reducing lubricant.· Good long term corrosion protection.· Reliable release agent.· Suitable for use in physiologically and
ecologically sensitive areas.· Low danger potential. · Safe working.Colourless, non discolouring.· Can be used on bright backgrounds.· No discolouration in the case of occasional
contact with the product.Does not contain white oil / mineral oil. Good material compatibility. Resin-, acid- and silicone-free.
Contents in ml Cat. Page Pack Qty.
400 04 0522 1/3/6
NSF H1 registered (No: 135927), corresponds to the requirements of USDA 1998 H1.
HACCP FZS Certified: PE-715-WA-01.
NSF H1 registered (No: 135925), corresponds to the requirements of USDA 1998 H1.
HACCP FZS Certified: PE-715-WA-01.
Food Safe Range
27MAINTENANCE INDUSTRY
Art. No. 0893 107 6 FOODSTUFF HHS
Watertight, synthetic adhesive lubricant with creeping action.
Can be used in areas in which food is processed or stored.
In this context, the product may come into incidental contact with food for technical reasons.
Very good creeping action.• Lubrication of hard-to-reach areas.• Penetration of very tight spaces and
tolerances.
Good adhesive properties.• Wide range of applications,
e.g. on vertical lubricating points.• Resistant to centrifugal forces on turning
and rotating parts.
Provides long-lasting protection against corrosion, especially of non-ferrous metals.
Water resistant.Resin and acid-free.Silicone and AOX-free.
Description Contents in ml Cat. Page Pack Qty.
Foodstuffs HHS 500 04 0531 1/12
Technical dataChemical Basis Synthetic oil
with multi-functional additive combination
Colour ColourlessViscosity (after the evaporation of the solvent at 40°C)
1251 cSt
Base oil viscosity at 40°C 32 mm2/sTemperature Range -25oC to 180oCFlash Point 200oC
Areas of application:Suited for universal lubrication at high pressure loads, e.g. for chains, racks, joints, levers, bearings, sliding points, cables, open drives, and hinges.
Use:Clean the lubricating point and then apply where required. If used in areas in which food is processed or stored, only the technically necessary minimum quantity should be used.
NSF H1 registered (No: 140816), corresponds to the requirements of H1, 1998.
HACCP FZS Certified: PE-715-WA-01.
Food Safe Range
HACCP FZS Certified: PE-715-WA-01.
28 MAINTENANCE INDUSTRY
Art. No. 0893 577 050 DOS PIPE SEALANT
• Seals immediately under low pressure loads. Pipes can be pressurised immediately up to approximately. 5 bar,
after final curing up to 300 bar.• Also cures at temperatures below 0°C. Can be used in cold weather.• High resistance to chemicals. Will not react with most industrial liquids and gases.
Gas and fluid proof sealing of all pipe threads and fittings up to 3”.
Contents Cat. Page Pack Qty.50g 05 1520 1
NSF registered under ANSI Standard 61 - Drinking Water System Components.Resistant to chemicals and gases: see resistance list.
Cat. Pages 05 1502/07 DOS THREAD LOCK - MEDIUM & HIGH STRENGTH
• Provides medium strength connections.• Curing is assured even on untreated parts.• Can be used with uncleaned parts (e.g. as delivered).• Can also be applied to stainless steel and passive surfaces.• No "accelerators" or "activators" required.• Outstanding resistance to chemicals and heat.• Universal product with a wide range of applications.• Curing takes place anaerobically and takes only 5 - 15 mins to be
hand-tight.
Screw retaining and sealing compounds - removable or permanent.
Description Art. No. Contents Cat. PageMedium Strength 0893 243 050 50g 05 1502High Strength 0893 270 050 50g 05 1507
Meets the requirement of NSF/ANSI Standard 61 - Drinking Water System Components.
HACCP SSZ Certified: PE-717-WA-01.
Food Safe Range
29MAINTENANCE INDUSTRY
Art. No. 0892 550* SILICONE ACETATE FOOD GRADE
Special, high-quality sealant for sealing in food processing and drinking water sector, as well as for aquarium construction.
• Resistant to microorganisms.• Can be used in food handling and processing operations.
Colour Contents in ml
Cat. Page Art No. Pack Qty.
Transparent
310 05 0535
0892 550 1
1/6/12White 0892 550 2Stainless Steel 0892 550 3Silver 0892 550 4
Art. No. 0893 235* BOND + SEAL POWERHeavy-duty, elastic hybrid construction adhesive with high initial adhesion strength and high UV-resistance.• NSF (P1)-registered (No. 136996) – international approval for use in
areas where food is processed or stored.• HACCP Certified• Excellent adhesive range.• Minimally elastic.• Suitable for painting over.• UV-resistant.• Non-corrosive.• VOC- and solvent-free.• Isocyanate-, PVC- and silicone-free.
Colour Contents Art. No. Pack Qty.White 300 ml 0893 235 1
1/12Black 300 ml 0893 235 3
Meets the requirement of NSF/ANSI Standard 61 - Drinking Water System Components.
HACCP SSZ Certified: PE-717-WA-01.
Meets the requirement of NSF/ANSI Standard 61 - Drinking Water System Components.
HACCP FZP Certified: PE-717-WA-01.
Food Safe Range
30 MAINTENANCE INDUSTRY
Cat. Page 04 4187 STAINLESS STEEL CARE SPRAY & OIL
Description Contents Art. No. Pack Qty.Stainless Steel Care Spray 400ml 0893 121 1Stainless Steel Care Oil 0893 121 0
Stainless Steel Care Spray – 0893 121 Cleaning emulsion for metallic surfaces.• Creamy emulsion with cleaning effect.• Removes dirt, polish marks and streaks as well as oily finger prints.• Application on vertical surfaces possible.• AOX and silicone free.
Stainless Steel Care Oil – 0893 121 0 Quick and simple visual treatment of metallic surfaces.• Quick and problem-free application.• Removes light dirt, dust, streaks and greasy finger prints.• Suitable for daily use.• Care and protection oil.• Creates a surface with uniform shine.• Water-repellent protective film prevents renewed accumulation of dirt.• Cost efficient above all, if the product is used for daily cleaning.• AOX and silicone free.
HACCP SSZ Certified: PE-717-WA-01.
Food Safe Range
31MAINTENANCE INDUSTRY
CLEANING & MAINTENANCE 04
With a wide range of products, Wurth is an all round supplier for cleaning & maintenance products.
32 MAINTENANCE INDUSTRY
Tabl
e of
Tec
hnic
al V
alue
sH
HS
5000
H
igh-
Perfo
rman
ce
Fully
-Syn
thet
ic Cr
eep
Oil
w
ith P
TFE
PTFE
Tran
spar
ent
Al
l-syn
thet
ic oi
l no
t app
licab
le fo
r oil
fo
r oils
200
0.
77 –2
0 20
0 25
0 20
0 25
0 –3
0 15
8 Ve
ry g
ood
Ve
ry g
ood
Very
goo
d Ve
ry g
ood
0-1
30
A
eros
ol, 5
00 m
l1/
6/12
HH
S 20
00
Hig
h-Pr
essu
re R
esist
ant
Hig
hly
Adhe
sive
Sy
nthe
tic Lu
brica
ting
Oil
none
Yello
wish
Pa
rtial
ly-sy
nthe
tic
not a
pplic
able
for o
il
for o
ils 1
500
0.75
–35
180
200
180
230
–20 78
Goo
d
Very
Goo
d Ve
ry G
ood
Very
Goo
d 0-1
30
A
eros
ol, 5
00 m
l1/
6/12
/24
HH
S LU
BE
Dirt-
Repe
lling
Spra
yed
G
reas
e w
ith Lo
ng-Te
rm
Actio
n an
d O
MC
2
OM
C2
Opa
l Gre
en
Synth
etic g
reas
e + lit
hium
soap
2
not a
pplic
able
for g
reas
es
0.77
–25
150
170
150
240
–20
153
Goo
d
Very
Goo
d Ve
ry G
ood
Very
Goo
d 0-1
30
A
eros
ol, 5
00 m
l1/
6
HH
S G
REA
SE
Whi
te H
igh-
Perfo
rman
ce
Mai
nten
ance
Gre
ase
Co
ntai
ning
PTF
E
PTFE
Brig
ht W
hite
25
Min
eral
oil
+ lith
ium
soap
2
not a
pplic
able
for g
reas
es
0.78
–15
130
200
130
200
–20
163
Very
Goo
d
Very
Goo
d Ve
ry G
ood
Very
Goo
d 1 30
Aer
osol
, 400
ml
1/6/
12/2
4
HH
S D
RYLU
BE
Hig
h-Pe
rform
ance
Dry
Lu
brica
nt R
esist
ant t
o
Cent
rifug
al F
orce
PTFE
wax
Yello
wish
Synt
hetic
wax
3 no
t app
licab
le fo
r gre
ases
0.76
–30
100
180
100
130
–20
350
Goo
d
Very
Goo
d Ve
ry G
ood
Very
Goo
d 0 30
Aer
osol
, 400
ml
1/6
The
expl
anat
ions
of t
he te
rms p
rinte
d in
red
are
cont
aine
d in
the
"Glo
ssar
y of
the
mos
t im
porta
nt tr
ibol
ogica
l ter
ms"
.
HH
S FL
UID
Flu
id G
reas
e Re
sista
nt to
Ce
ntrif
ugal
For
ceno
neYe
llow
ish
Synt
hetic
oil
and
grea
se
1 20
00
0.77
–25
170
200
170
220
–20 86
Goo
d
Very
Goo
d Ve
ry G
ood
Very
Goo
d 0-1
30
Ae
roso
l, 50
0 m
l1/
6
Prod
uct
Type
So
lid L
ubri
cant
Colo
urCo
nsis
tenc
y, D
ensi
ty, V
isco
sity
Ba
se o
il N
LGI c
lass
Vi
scos
ity in
mm
2 /se
c De
nsity
at 2
0°C,
g/m
lTe
mpe
ratu
re
Low
er o
pera
ting
tem
pera
ture
rang
e, °
C
Upp
er o
pera
ting
tem
pera
ture
rang
e, °
C
Ope
ratin
g te
mpe
ratu
re ra
nge,
tem
pora
ry, °
C
Dro
p po
int,°
C F
lash
poi
nt,°
C (w
ithou
t sol
vent
) F
lash
poi
nt,°
C (w
ith so
lvent
)Lo
adab
ility
, Wea
r Pr
otec
tion,
Li
fe
SRV
(DIN
518
34)
Wea
r fac
tor
Resi
stan
ce
Oxi
datio
n re
sista
nce
Mat
eria
l res
istan
ce
Ela
stom
ers
Pla
stics
P
aint
ed su
rface
sCo
rros
ion
prot
ectio
n S
KF-E
mco
r met
hod
(DIN
518
02),
Deg
ree
of c
orro
sion
Shel
f Life
, Mon
ths
App
licat
ion
Met
hod
Shak
e ca
n w
ell.
Thor
ough
ly p
re-cl
ean
the
parts
to b
e tre
ated
with
HH
S CL
EAN
, Art.
No.
089
3 10
6 10
, the
n sp
ray
onto
the
clean
ed su
rface
from
a d
istan
ce o
f
appr
oxim
atel
y 20
cm
.Co
ntai
ner
Size
Pack
ing
Uni
t
Cat. Page 04 1002 HHS RANGE INFORMATION
33MAINTENANCE INDUSTRY
Protects, maintains, lubricates and insulates plastic and rubber surfaces.
• Suitable for bumpers, radiator grills, protective strips, plastic rails and guides, sealing rubbers (e.g. doors), rubber covers and rubber hoses.
• Protects electrical contacts against dampness and corrosion. • Excellent window channel (bailey channel) lubricant.• Serves as an assembly aid.• Anti-static. Resists dirt formation.
Description Contents Cat. Page Pack Qty.Silicone Spray 300g 04 1061 1/12
Art. No. 0893 221 SILICONE SPRAY
Cleaning & Maintenance
Use this handy QR code to view our Silicone Spray Product Demonstration, or visit www.wurth.com.au
Art. No. 0890 085 500 ULTRA 2040
Multi-purpose penetrant, lubricant and water displacer containing PTFE for long-term lubrication.
• Provides long term lubrication for locks, runners, guides and other items prone to wear.
• Prevents squeaking and creaking noises, e.g. door hinges.• Outstanding creep properties ensures product penetrates into the
tightest tolerances to provide lubrication.• Loosens seized and rusted parts.• Ideal for insulating electrical systems.• Perfect for use as a contact spray.• Improves electrical conductivity and eliminates leakage currents.• Drives water out of electrics.• Prevents corrosion.
Description Catalogue page P. Qty.500 ml Aerosol 04 1097 1/12
Technical Data:Colour Amber LiquidDensity 0.80 g/mlTemperature range -20oC to 140oCViscosity 22 cSt at 40oC
Use this handy QR code to view our Ultra 2040 Product Demonstration, or visit www.wurth.com.au
34 MAINTENANCE INDUSTRY
Art. No. 0893 240 ROST OFF ICE
Description Contents Cat. Page Pack Qty.Rost Off Ice 400ml 04 1068 1/6/12
High-grade rust loosener with cracking effect created by extreme cooling, and excellent creeping properties.
• Cracking effect.• Phenomenal capillary action.• Superior creeping properties combined with the cracking effect ensure
excellent penetration of rust.• Ideal rust removing capability.• Corrosion protection additives.• Long-term protection against subsequent corrosion.• Free from resins and acids.• Silicone-free.• No damage to rubber and seals.
Cleaning & Maintenance
Art. No. 0893 110 RUST CONVERTER
Dispersion-based, environmentally friendly rust converter.
• Suitable for painting over.*• Can be painted over with all common top-coating paints after
3 hours (once cured)*• Suitable for filler coating.• Environmentally friendly, as water based.• Safety product.• Reduced danger potential at workplace.• For ferrous metal only. • Not suited for aluminium.
Cat. Page 04 5622
35MAINTENANCE INDUSTRY
For thorough and quick cleaning of most surfaces without water, soap or a brush.
Ideal for mobile, daily use
Removes thoroughly, but gently, even the toughest dirt such as oils, greases, glues, tar and lubricants
Problem solverTool, surface and hand cleaning in a single product.
Also gently cleans handsProvides lasting skin care and has a pleasant, fresh scent.
Reusable, as the wipe can be washed out with water and remoistenedMultiple use means money saved.
Art. No. 0890 900 90 Pack Qty. 1 6Scent/Aroma Orange OrangeSuitable for storage from time of manufacture 30 months 30 monthsNumber of wipes 90 pc. 90 pc.Width x length 27 x 32 cm 27 x 32 cm
Cat. Page 04 3501 UNIVERSAL CLEANING WIPES
Cleaning & Maintenance
Cat. Page 04 4331 ACTIVE GLASS CLEANER
Cleaning foam for glass and smooth surfaces.
• Stable cleaning foam.• Extremely active cleaning foam.• Outstanding dirt dissolving power.• Gentle on material.• Silicone and AOX-free.
Description Contents Art. No.Aerosol 500ml 0890 25Container 5L 0890 250 5Pouring Tap for 5L - 0891 302 01
NSF C1 registered (No.150 555), corresponds to the requirements of USDA C1.
36 MAINTENANCE INDUSTRY
Art. No. 0893 90* HAND CLEANER
Art. No. 0899 900 107 MICROACTIVE CLEANING CLOTH
Cleans and protects at the same time.Does not contain alcohol. Free from silicone oil.
• Cleans dirty hands easily and thoroughly.• Protects and cares for skin due to dermatin skin protection.• Prevents skin irritation.• Pleasant smell.• Biologically degradable.• No blockage of drain pipes.• Extra additions of skin-caring and skin protecting substances.• Strengthened skin oiling effect.• PH neutral.• Tested dermatologically.
Cat. Page 04 3531
Description Contents Art. No. Pack Qty.Hand Cleaner Coarse 4000 ml 0893 900 099 1/6Hand Cleaner Fine 4000 ml 0893 900 0 1/6Hand Cleaner Tube (Fine) 350 ml 0893 900 01 1/6Dispenser System & Wall Bracket
- 0891 901 1
Description Dimensions Cat. Page Pack Qty.Microactive Cleaning Cloth 36cm x 32cm 04 6031 1
The active-surface microfibre cleaning cloth
Powerful cleaning. • Gets the job done in less time. • Non-streak cleaning. • No cleaning agents required.No need for cleaning fluid. • Saves money. • Ideally suited for polished work. • Low environmental impact. • Non-allergic.
Technical data
Absorption in 10 sec. 702.50%Maximum Absorption 704.30%Total Absorption time 30 sCoating Weight 35.8 g + 0.5 gComposition of Fibres PET/PA Microfibres
Cleaning & Maintenance
37MAINTENANCE INDUSTRY
Description Contents Art. No. Pack Qty.Hand Cleaner Coarse 4000 ml 0893 900 099 1/6Hand Cleaner Fine 4000 ml 0893 900 0 1/6Hand Cleaner Tube (Fine) 350 ml 0893 900 01 1/6Dispenser System & Wall Bracket
- 0891 901 1
Art. No. 0893 118 2 BMF CLEANER
The environmentally friendly cleaner for workshop, machines and vehicles.• Does not contain phosphates, solvents or etching substances.• Bio-degradable.• Can be applied mechanically, manually or with high pressure
applicators.• High degreasing capacity but gentle and kind to material.• Will not damage lacquer, rubber and plastic.• Self-emulgating, i.e. separates oil within the sewage water.• Silicone free.
Description Contents Art. No. P. Qty.BMF-Cleaner 5L 0893 118 2 1/4Pouring Tap for 5L – 0891 302 01 1BMF Cleaner Pump Bottle 1L 0891 511 8 1/6/12
Cat. Page 04 4362
Art. No. 0891 503 001 WURTH PUMP BOTTLE
• Capacity 1 litre.• Recommended for Wurth product only.• Environmentally safe method of spraying bulk products.• Adjustable from jet to fine mist.
Description Cat. Page Pack Qty.Universal Pump Bottle 04 6001 1
Cleaning & Maintenance
Use this handy QR code to view our BMF Cleaner Product Demonstration, or visit www.wurth.com.au
38 MAINTENANCE INDUSTRY
GRAFFITI-EX FOR OUTDOOR USE The graffiti remover for smooth, non-porous surfaces outdoors.The problem solver for large area extreme graffiti, particularly on painted surfaces.
• Extremely strong cleaning power.• With special paint solvents.• Gentle on materials and surface finishes.• Wide range of applications.• AOX-free.• Silicone free.
GRAFFITI-EX FOR INDOOR USEThe graffiti remover for smooth, non-porous surfaces indoors.The problem solver for graffiti, on sensitive surfaces.
• Extremely strong cleaning power.• With special paint solvents.• Gentle on materials and surface finishes.• Wide range of applications.• AOX-free.• Silicone free.
Description Contents Cat. PageGraffiti-ex for Outdoor Use 500ml 04 4152
Description Contents Cat. PageGraffiti-ex for Indoor Use 500ml 04 4152
Art. No. 0893 13* GRAFFITI REMOVER
Cleaning & Maintenance
GRAFFITI-EX SPECIALThe graffiti and chewing gum remover for upholstery and fabrics.
• Outstanding cleaning power.• Gentle on materials and surface finishes.• Short drying-time due to low moisture content.• Particularly well-suited for gentle dissolution of
chewing gum on various different surfaces.• AOX-free.• Silicone free.
Description Contents Cat. Page Pack Qty.Graffiti-ex Special 500ml 04 4157 1/12
39MAINTENANCE INDUSTRY
Art. No. 0893 050 011 CUT + COOL CUTTING AND DRILLING OIL/GEL ECO
Biodegradable, harmless cutting oil with Eco-Stop.
• Eco-Stop technology.• Easy to use.• Neutral behaviour.• Cutting gel for extreme loads.
Cat. Page 04 2002
Description Content Art. No. Pack Qty.Aerosol 400ml 0893 050 011 6Container 5 L 0893 050 012 1Tap for 5L Container - 0891 302 01 1
Ordinary Oil
Cutting Oil EcoThanks to adhesion of oil particles on machining tool, an optimum, long- term lubricating action is achieved.
Highly effective anti-wear additive assures best possible reduction of friction.• Prevents premature wear and binding of hammer drills in machine
chucks.• Excellent creep and cleaning capacity. - Keeps door and window hinges operating smoothly. - Lubricates and services all types of fine mechanics.• Resin and acid free. • Does not attack sensitive components.• Silicone free.• Also suitable for use as firearm lubrication oil.
Instructions for Use: Spray onto the area to be lubricated.
Area of Application:Lubrication of hinges, tool and machine chucks.
Description Contents Cat. Page Pack Qty.Maintenance Spray 150ml 04 1092 1/12
Art. No. 0893 051 MAINTENANCE SPRAY
Cleaning & Maintenance
40 MAINTENANCE INDUSTRY
Highly absorbent blue paper towel for general workshop use.• 1000 sheets = 360m roll.• Professional and neat workshop image and application.• Consistent in absorption, a quality wipe compared to ‘mixed rags’.• Suitable for all common dispensers.• Meets the requirements of LFGB and regulation (EC) No.1955/2004,
including recommendation XXXV1 of the BFR in all tested items.
Type Format in cm Sheets Art. No. Pack Qty.Blue, 3 ply 38 x 36 1,000 0899 800 823 2
PAPER TOWEL ROLLS
Description Art. No. Pack Qty.
Floor Stand for Paper Towel Rolls 0899 800 606 1
FLOOR STAND ROLL HOLDER
WALL-MOUNTED ROLL HOLDER
For paper towel rolls.• With wheels and garbage bag holder.• Width: 50 cm• Height: 86 cm• Depth: 68 cm• Max. roll width: 38 cm• Colour: red
Description Art. No. Pack Qty.
Wall Mounted Paper Towel Roll Holder 0899 800 607 1
For paper towel rolls.• With garbage bag holder.• Width: 50 cm• Height: 63 cm• Depth: 32 cm• Max. roll width: 38 cm• Colour: red
GARBAGE BAGS
Description Thickness Art. No. Pack Qty.
Garbage Bags - Blue 40µ 0899 800 550 25/250
• 120 litres.• 700 x 1,100 mm.• Material: Premium LDPE.• Suitable for paper towel stands.
Cat. Page 04 6021 PAPER TOWEL ROLLS & ACCESSORIES
Cleaning & Maintenance
Use this handy QR code to view our Paper Towel Product Demonstration, or visit www.wurth.com.au
41MAINTENANCE INDUSTRY
* Silicone based paints
Cat. Page 05 5062 LACQUER SPRAY PAINTS
Sealing, Bonding & Painting
SEALING, BONDING & PAINTING 05
Fast drying corrosion protection and paint primer for metallic surfaces.
High-quality nitroalkydal spray lacquer.• Quick drying.• High gloss.• Good coverage.May be painted over onto all known primers, fillers, lacquer types.• Wide range of uses, such as: - Commercial vehicles - Bodywork - Heating elements - Windows - Structural steel, etc.
Colour RAL No. Contents Art. No.High Gloss Chrome Yellow RAL 1007 600ml 0893 331 007High Gloss Zinc Yellow RAL 1018 600ml 0893 331 018High Gloss Gentian Blue RAL 5010 600ml 0893 335 010High Gloss Yellow Green RAL 6018 600ml 0893 336 018High Gloss Grey/White* RAL 9002 600ml 0893 339 002High Gloss Pure White RAL 9010 600ml 0893 339 010Satin Gloss Flame Red RAL 3000 400ml 0893 343 000Satin Gloss Emerald Green RAL 6001 400ml 0893 346 001High Gloss Clear Varnish RAL 1930 400ml 0893 351 930Silk Matt Clear Varnish RAL 1920 400ml 0893 351 920High Gloss Pearl White RAL 1013 400ml 0893 361 013High Gloss Yellow* RAL 4464 400ml 0893 364 464High Gloss Traffic Blue RAL 5017 400ml 0893 365 017High Gloss Light Grey RAL 7035 400ml 0893 367 035
Catalogue Page 05 5062
Colour Finish Contents Art. No. P. Qty.Black Matt 400 ml 0893 329 005
6
Red High gloss 600ml 0893 333 020Black High gloss 600ml 0893 339 005Black Satin 400ml 0893 349 005Silver Satin 400ml 0893 351 900CAT® Yellow High gloss 400ml 0893 360 200White High gloss 600ml 0893 369 016
Cat. Page 05 5091
42 MAINTENANCE INDUSTRY
Sealing, Bonding & Painting
Art. No. 0893 109 ZINC RICH WELD-THRU PRIMER
Pure Zinc 98–99%Long term protection for all metal surfaces such as wheel rims, truck building, air conditioning system.
• Provides long life double protection against climatic influences.• Heat resistant to 490 °C.• Very good conductor, especially suited to spot welding and mig welding.
Description Contents Cat. PageZinc Rich Weld-Thru Primer 400 ml 05 5031
Art. No. 0893 114 11* METAL SURFACE SPRAYS – PERFECT
Outstanding long term protection and optimum metal surface appearance.
• High layer thickness in 1st spraying pass. Can be used on residual rust.• For variable use thanks to adjustable spray head.• High resistance to running. High abrasion resistance.• Tested high level of corrosion pro tection according to DIN 50021 SS
in salt spray test.• Optimal for spot welding.
Description Contents Art. No. P. Qty.Zinc Spray Light Perfect 400ml 0893 114 114
1/12Aluminium Spray Matt Perfect 400ml 0893 114 115Stainless Steel Spray Perfect 400ml 0893 114 116
Cat. Page 05 5001
Heat Proof Lacquer Spray.• Heat proof to +650°C.• For painting parts subjected to high temperatures. e.g. assembly work, exhaust systems, radiators.
Partner Product:Primer
Cat. Page 05 5091 HEAT PROOF LACQUER SPRAY PAINT
Description Contents Art. No.Heat Proof Lacquer Spray - Matt Black 400 ml 0893 359 005
43MAINTENANCE INDUSTRY
What is the DOS System? A revolutionary system for one handedapplication of sealants.
The benefits of the DOS System.
Accessibility:• Bottles stored in the practical storage holder
means the right product is easy to find and always within reach.
• The storage holder may be set up anywhere, such as a work bench, on the wall or a tool trolley.
Practicality: The seven most important sealants for every work shop are included in the set.
Ease of Use: • The revolutionary "dosage cap" allows
accurate application of the product with no overflow.
• Each bottle can be operated easily with one hand.
• Because the bottles are stored lid-down in the holder, the product is always ready to use.
• Ensures that each bottle is completely used up.
Product Data
HydraulicSealant
Thread LockerHigh Strength
Thread LockerMedium Strength
Bearing RetainerHigh Strength
Flange Sealant Green
Flange Sealant Orange
Pipe Sealant Motor Sealant
Art. No.0893 545 050
Art. No.0893 270 050
Art. No.0893 243 050
Art. No.0893 603 050
Art. No.0893 573 050
Art. No.0893 574 050
Art. No.0893 577 050
Art. No.0893 260 100
For sealing pneumatic and hydraulic connections under high loads up to the bursting pressure of the hose.
For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration.
For securing bearings, gear wheels, bolts, screws, shafts and auxiliary joints. Prevents rattles due to load change.
For sealing precision machined flanges and surfaces with gaps to max. 0.3mm. Replacement for solid gaskets.
For sealing precision
machined flanges and
surfaces with gaps to
max. 0.5mm.
Replacement for solid
gaskets.
Gas & fluid proof sealant for all pipe threads and fittings up to R3”.
Motor Sealant is a transparent, red, viscous fluid sealant which bonds to all metals. Suitable for all engine gasket surfaces since no residue remains. All sealed surfaces are sealed against thermal, chemi-cal and mechanical stress. Sealed surfaces can be easily separated. Resistant to pet-rol, diesel, oil, grease, water, steam, frost and all normal chemicals. *Only suitable for use on engine components.
Description Art. No. P. Qty.DOS Sealants System 0893 964 1
Chemical Basis:
Colour:
Viscosity in mPas:
Stability in storage:
Full strength at 25ºC:
Break loose resistance:
Operating pressure:
Tensile strength:
Temp. resistance:
Max. gap bridging:
Max. thread joint:
Max. glue gap:
Instructions for use:
DOS SYSTEM APPLICATION GUIDE
RESISTANCE TABLE FOR DOS-SYSTEM• Kerosene • Alcohols • Formic Acids • Ethelacetate • Acetone • Petrol • Alkaline Solutions • Phosphoric acid (10%) • Diesel • Jet Fuel • Aviation Spirit • Frost protection • Gear oil • Heating oil • Hydraulic oil • Solvents (chlorinated) • Engine oil • Oils • Xilene • Steam • Coolants • Brake Fluid
Product
Application:
Properties:
Motor Sealant
Art. No.0893 260 100
Thread LockerHigh Strength
Art. No.0893 270 050
Thread LockerMedium Strength
Art. No.0893 243 050
Bearing Retainer
High StrengthArt. No.
0893 603 050
Flange SealantGreenArt. No.
0893 573 050
Flange SealantOrange
Art. No.0893 574 050
Pipe Sealant
Art. No.0893 577 050
Hydraulic Sealant
Art. No.0893 545 050
Motor Sealant is a transparent, red, viscous fluid sealant which bonds to all metals. Suitable for all engine gasket surfaces since no residue remains. All sealed surfaces are sealed against thermal, chemical and mechanical stress. Sealed surfaces can be easily separated. Resistant to petrol, diesel, oil, grease, water, steam, frost and all normal chemicals. *Only suitable for use on engine components.
For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration.
For securing bearings, gear wheels, bolts, screws, shafts and auxiliary joints. Prevents rattles due to load change.
For sealing precision machined flanges and surfaces with gaps to max. 0.3mm. Replacement for solid gaskets.
For sealing precision machined flanges and surfaces with gaps to max. 0.5mm. Replacement for solid gaskets.
Gas & fluid proof sealant for all pipe threads and fittings up to R3”.
Epoxy resin Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate
Transparent Red Green Fluorescent Blue Green Fluorescent Green Fluorescent Orange Fluorescent Yellow Violet
5,000 – 13,200 400 - 600 5,000 - 7,000 100 - 150 40,000 - 60,000 35,000 - 100,000 20,000 - 80,000 1,500 - 2,000
1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year
+80oC=6hrs, +180oC=5hrs 6 hours 3 hours 6 - 24 hours 6 - 24 hours 6 - 24 hours 3 hours 12 - 24 hours
– >30Nm 21Nm – 8 - 12Nm 17 - 22Nm 15 - 20Nm 2-3Nm
700 bar (10,290psi) – – – – – 300 bar (4410psi) 200 bar (2940psi)– – – – 2 - 4 N/mm2 8 - 10 N/mm2 – –
-50oC to +280oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC
approx 2mm up to 0.15mm up to 0.25mm up to 0.15mm up to 0.3mm up to 0.5mm 0.5mm 0.15mm
– M20 M36 M12 – – R3” (M80) R3/4”
approx 2mm – – – 0.3mm 0.5mm – –
Clean and dry the surfaces to be sealed.Apply a thin layer of the material on one side and leave for 5-20min to air, then join two surfaces. Thermal hardening possible from +60oC. It is relatively easy to separate the joined parts if necessary.
Universal product for all threads and cylindrical parts which would not normally be released again.
Can be released with special tools and/or heat.
A commonly used product, providing excellent protection against oil, water and heat.
Will harden even at very low temperature.
Can be released with normal tools.
Universal product for heavily stressed joints. High tear-resistance.
Can be used in small spaces between joined surfaces.
Excellent resistance to media.
Particularly suitable where a good coverage is essential e.g. with complicated castings, narrow links and smooth surfaces.
An easily detached low adhesion joint, which is particularly flexible.
Particularly suitable where a good coverage is essential e.g. with complicated castings, narrow links and smooth surfaces.
An easily detached low adhesion joint, which is particularly flexible.
Highly suitable for larger and rougher machined surfaces.
Excellent resistance to chemicals, gas, liquids, fuels and hydraulic fluids.
Motor Sealant Thread
LockerBearing Retainer Flange
Sealant Flange Sealant
PipeSealant Hydraulic
Sealant
For sealing pneumatic and hydraulic connections under high loads up to the bursting pressure of the hose.
Excellent resistance to chemicals, gas, liquids, fuels and hydraulic fluids.
Fast curing even at low temperatures.
Can be applied on slightly oily surfaces, no need for time consuming degreasing of threads.
For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration.
Clean add dry threads, applying a small amount of Thread Lock. Tighten to specifications.
Clean and dry all surfaces to be sealed with a suitable solvent (ie. Brake Cleaner - 0890 108 7).Apply a thin layer of Sealant to one side only and assemble parts immediately.
Apply a small amount of Hydraulic Sealant to threads and tighten to specifications.
Thread Locker
Article No. 0893 964 001/ Job No. 391110 - AUS/Revised/Reprint: 2/11 Wurth Australia Pty. Ltd. - T: 1300 65 77 65 - Contact us today
A product that adheres to most surfaces. It is permanently pliable and resistant to vibration. As the product only has to applied thinly to one side it is very economical. It can also be used as a replacement for solid gaskets.
Art. No. 0893 964 001
Patented dosage cap - with 3 different dose settings.Won't dry out and no need to cut.
Closed position, totally airtight
Open position, three settings
DOS System Poster.
Cat. Page 05 1501 DOS SYSTEM
Sealing, Bonding & Painting
44 MAINTENANCE INDUSTRY
One-part, fast curing solvent-free elastic adhesive for full surface elastic bonding of wood floors.
Features• One-component, ready for use.• Excellent workability.• Elastic, footfall sound dampening adhesive.• Suitable for most common types of wood
floors.• Suitable for bonding wood floors directly onto
old ceramic tiles.• Adhering parquetry to concrete and timber
floors.• Strip flooring to concrete or timber floors.• Adhesive can be sanded.• Solvent-free.• Odourless.
Description Contents in ml Art. No. Pack Qty.Woodfloor Bonding Adhesive 600 0890 111 181 20
Cat. Page 05 4321 WOODFLOOR BONDING ADHESIVE
Sealing, Bonding & Painting
Cat. Page 05 4213 KD BOND & SEAL
Elastic polyurethane adhesive and sealant for a broad range of uses.
• Outstanding adhesive strength on a wide range of materials and surfaces.
• Highly elastic (shore A hardness of +40).• Long skin formation time.• Can be ground and painted over.• Approved for use with foodstuffs (ISEGA certificate).• Non-corrosive. Nearly odourless. Silicone-free.• Physiologically safe to use and completely harmless when cured.• Can be smoothed with soapy water.• Shelf life of 12 months.Colour Content Art. No.
White 300ml 0890 100 1Grey 300ml 0890 100 2Black 300ml 0890 100 3Sand 300ml 0890 100 6
Use this handy QR code to view our KD Bond & Seal Product Demonstration, or visit www.wurth.com.au
45MAINTENANCE INDUSTRY
Sealing, Bonding & Painting
Fast-Acting Cyanoacrylate Adhesive with Measuring System.• For extremely fast connection of any combination of rubber, plastic and metal parts to one another.• Patented special cap. - Problem-free, one-handed use. - Precise dispensing. - The tips do not clog.• Bonds in seconds. - Immediate further processing possible. - Fast repairs. - Simple adhesion, without additional clamping required. - Increased temperature usually not necessary.• Solvent-free.
Attention:It is advisable to wear safety gloves and goggles.
Description Contents Art. No.Superfast Glue 20g 0893 09Superfast Glue Easy Pen 30g 0893 090 030
Also available in the Innovative EASY PEN design.• Even easier, more practical handling.• Fits ergonomically in your hand.• The base of Easy Pen provides stable, secure support.• The lever permits easy, problem-free use without great force.• High-precision work possible.• Large 30g container.
Cat. Page 05 4007 SUPERFAST GLUE
Very fast, high-strength adhesive.
• Proven adhesive properties.• High-strength connection.• Fast-hardening.• Special adhesive range.• Can be ground and painted over.• Resistant to weathering and ageing.
Contents Colour Art. No.310ml / 470g Beige 0893 100 110
Cat. Page 05 4271 MULTI HIGH-STRENGTH ADHESIVE
46 MAINTENANCE INDUSTRY
For sealing joints indoors with low movement absorption.
Can be painted/plastered over *Outstanding adhesion of common paints/plasters on sealant.
Areas of application:For sealing and connection joints with low compression and expansion loading indoors, e.g. for sealing cracks in masonry, plaster or concrete.
Typical application surfaces:With primer: Clinker, brick, wood, concrete, aerated concrete, gypsum, gypsum plasterboard, plaster, chalky sandstone
Note:* Due to the multitude of paint and lacquer formulas available,
we recommend that you always carry out preliminary testing in order to rule out interactions. Caution: Sealant joints that have been fully painted over tend to crack when movement occurs in the joint, as the applied paint is generally less elastic than the sealant.
Description/Container Colour Content in mL Art. No. Pack Qty.
Cartridge White 310 0892 165 24The colour information can differ from the original for printing-related reasons!
Cat. Page 05 0581 ACRYLIC SEALANT
Sealing, Bonding & Painting
Cat. Page 05 0532 SILICONE ACETATE
Colour Contents Art. No. Pack Qty.Clear
280ml0892 318 81
24Black 0892 318 82White 0892 318 83
For tile joints subject to medium loading.
Fungicide.• Prevents growth of mould fungus in bathroom
areas.
Excellent adhesion on tiles.• Ensures reliable sealing of the joints.
Broad range of uses.• Excellent adhesion on a large number of
surfaces, especially also on glazed surfaces.
Other advantages:• High resistance to chemicals.• Good smoothing behaviour.• Permanently elastic.
47MAINTENANCE INDUSTRY
Cat. Page 05 4532 DUCT TAPEHigh quality, highly flexible sealing and joining Duct Tape.
• Flame retardant.• Cold resistant.• Rated to 600V.• Highly flexible.• Excellent adhesion.
Colour Length Width Thickness Art. No.Silver 30 m 48 mm 0.13 mm 0874 100 298
Sealing, Bonding & Painting
Cat. Page 05 4501 CLOTH REINFORCED TAPE
Polycloth adhesive tape. The universal adhesive tape that is ideal for many applications.
Strong rubber adhesive.• Very strong adhesion, even on rough and fibrous surfaces.
Plastic-coating.• The tape is moisture resistant and suitable for writing on.
Can be torn off by hand.• Quick and easy application of the tape.
Colour Length Width Thickness Art. No.Silver
50m 50mm 0.28mm0874 050 01
Black 0874 050 02
48 MAINTENANCE INDUSTRY
High strength double sided adhesive tape with polyethylene carrier and acrylate adhesive.
• Very strong adhesion.• Foam carrier.• High temperature, UV and weather resistance.
Width Length Thickness Art. No.12mm
10m 0.8mm0894 910
24mm 0894 910 14mm 0894 910 4
Highly resistant, self-welding silicone tape for instant repairs and sealing applications.
• Resistant to a broad range of media.• Water and air-tight in seconds.• Very versatile.• Extremely simple, fast application.
Also optimally suited for breakdown and emergency service.• Functions even on damp or oily surfaces and under water.• Can be removed without residues.• Permanently elastic.Colour Width Length Thickness Art. No.
Black25.4 mm 3.65 m 0.5 mm
0985 077 230Red 0985 077 231White 0985 077 232
Cat. Page 05 4502 CLEAR DOUBLE SIDED TAPE
Cat. Page 05 4541 HR INSTANT REPAIR TAPE
Sealing, Bonding & Painting
Cat. Page 07 6001 PVC INSULATION TAPE
Flame retardant.
• Cold resistant.• Heat resistant to 85oC.• 600V.• Highly flexible.• Excellent adhesion.• Pack Qty: single roll or 10 roll tubes.
Colour Width mm
Lengthm
Art. No.
Red19 20
0985 301Black 0985 302
49MAINTENANCE INDUSTRY
Width Length Thickness Art. No.12mm
10m 0.8mm0894 910
24mm 0894 910 14mm 0894 910 4
• Self tapping Screws
• Stitching Screws
• Tapping Screw Assemblies
• Self Drilling Screws
• Thread Rolling Screws
• Decking Screws
• Construction Screws
• Zinc-Nickel Screws
• ASSY Screws
• Chipboard Screws
• Bugle Batten Screws
• Jamo Plus Screws
• Hexagon Head Coach Screws
• Cement Panel Screws
• Bugle Head Drywall Screws
• Bugle Head Drilling Screws
• Metric Washers
• Imperial Washers
• Hardened Washers
• Thick Washers
• Penny Washers
• Spring Lock Washers
• Hardened Spring Lock Washers
• Star Washers
• Serrated Lock Washers
• Wave Washers
• Shakeproof Washers
• Electrical Contact Washers
• Conical Spring Washers
• Cup Washers
• Metric/Imperial Nuts
• Nylock Nuts
• Metal Safety Nuts
• Conelock Nuts
• Safety Nuts
• Dome Nuts
• Wing Nuts
• Square Cage Nuts
• Drive In Nuts
• Hexagon Head Bolts
• Hexagon Head Screws
Our industry leading hardware range includes:
HARDWARE06
50 MAINTENANCE INDUSTRY
OVERVIEW OF DIN AND STANDARD PARTS
Zebra Pias - The Self Drilling Screw For MetalDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
W-206Pan head with AW drive
Steel, Zinc 0206 06 3641
W-206 1 Stainless Steel A2 0206 1 06 3662
―Caps for AW drive pias screws 4.2 & 4.8 (0206...)
Plastic 0202 001 06 3642
W-211Pan head with Phillips drive
Bimetal, Ruspert 0211 8 06 3661
―Countersunk head with AW drive
Steel, Zinc 0205 06 3681
W-214similar to(7504-K)
Hexagon head with collar
Steel, Zinc 0214 06 3621
Self Drilling ScrewDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
―Wafer head, for metal
Steel, Zinc yellow 5056 06 3682
ASSY Decking Construction ScrewDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
―
ASSY with AW drive
Stainless Steel A2 0166 1006 3721
ASSY with AW drive
Stainless Steel A4 0169 00
ASSY 3.0 Zinc-Nickel ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—Assy 3.0 Countersunk with AW Drive
Steel, Zinc-Nickel 0170 8 06 3722
Self Tapping ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
7981(ISO 7049)
Phillips Pan head, form C
Steel, Zinc 0115
06 3521Steel, black burnished 0134
Stainless Steel A2 0119Stainless Steel A4 0127 1
7982 (ISO 7050)
Phillips countersunk flat head
Steel, Zinc 0116
06 3562Stainless Steel A2 0123
Stainless Steel A4 0127 2
Fasteners
51MAINTENANCE INDUSTRY
OVERVIEW OF DIN AND STANDARD PARTS
Hexagon Head Coach ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
571 Hexagon headStainless Steel A2 0193
06 3821Stainless Steel A4 0191 0
Chipboard ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
―Milling head, thin shank, Phillips drive
Steel, Zinc, Class 2 017106 3761Steel, Galvanised,
Class 30171 1
L
ASSY ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—ASSY, Countersunk with AW drive
Steel, Zinc 0170 0
06 3741—
ASSY, Pan head with AW drive
Steel, Zinc 0153 0
—ASSY Countersunk Head with shaft and AW Drive
Steel, Zinc 0170 1
—Caps for ASSY screws AW 20/30
Plastic 0590 7 06 3742
Jamo Plus ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—Countersunk, drilling tip. milling ribs, AW drive
Steel, Zinc 0234 4 06 3801s
t
d k
Bugle Batten ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
AS 3566Countersunk, Hex socket drive
Steel, Galvanised, Class 3
0189 06 3782h
ø
L
sw
Fasteners
52 MAINTENANCE INDUSTRY
OVERVIEW OF DIN AND STANDARD PARTS
Cement Panel ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—Countersunk, milling ribs, Phillips drive
Steel, Zinc yellow 0189 5 06 3822
Bugle Head Drywall ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—
Fine thread with Phillips drive
Steel, Zinc yellow 0189 0
06 3841Fine thread with Phillips drive
Steel, Galvanised, Class 3
0189 1
—Course thread with Phillips drive
Steel, Zinc yellow 0189
Bugle Head Self Drilling ScrewsDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—With drilling tip, Phillips drive
Steel, Zinc yellow 0189 7
06 3841Steel, Galvanised, Class 3
0189 8
Washers - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
125(ISO 7089)
Flat washers
Steel, Zinc 0407
06 4501Polyamide 0421 00Stainless Steel A2 0409Stainless Steel A4 0412
Fasteners
53MAINTENANCE INDUSTRY
OVERVIEW OF DIN AND STANDARD PARTS
Penny Washers - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. PageTolerances according to 522
Penny washers
Steel, Zinc 0411 06 4562
9021(ISO 7093)
Stainless Steel A2 041906 4581
Stainless Steel A4 0412
Hardened Washers - Metric and ImperialDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
―
Washers,Metric
Steel, Zinc, 10.9 metric 040706 4522
Washers,Imperial
Steel, Zinc, grade 8 imperial
1902
Spring Lock Washers - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
127Type B,smooth
Steel, Zinc 0441 06 4601
Stainless Steel, A2 0447Stainless Steel, A4 0445
Nylock Nuts - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
985
hexagon nutself-locking, low form, with plastic insert
Steel, Zinc, 8.8 0368
06 5061Steel, Zinc, 10.9 0370Stainless Steel, A2 0391Stainless Steel, A4 0397
Nuts - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
934 (ISO 4032)
Hexagon nut
Steel, plain, 8.8 0310
06 5001
Steel, Zinc, 8.8 0317Steel, plain,10.9 0320Steel, Zinc, 10.9 0324 0Stainless Steel, A2 0322Stainless Steel, A4 0326
Dome Nuts - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
1587high form, hexagon, domed
Steel, Zinc, 6, 0356
06 5122Brass, Chrome 0352Stainless Steel, A2 0348Stainless Steel, A4 0349
Wing Nuts - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
315wing nut,German form
Stainless Steel A2, metric
034406 5141
Stainless Steel A4, metric
0340
Fasteners
54 MAINTENANCE INDUSTRY
Screws With Reduced Head Size - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
—Reduced head size screws with Phillips drive
Steel, Zinc TBA 06 5522L
ddk
Hexagon Head Screws And Bolts - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
933(ISO 4017)
Thread up to the head
Steel, Zinc, 8.8 0057
06 5581Steel, plain,10.9 0056Steel, Zinc, 10.9 0107Stainless Steel A2 0096Stainless Steel A4 0091
931(ISO 4014)
With shank
Steel, Zinc, 8.8 0053
06 5601Steel, plain,10.9 0052Steel, Zinc, 10.9 0105Stainless Steel A2 0095Stainless Steel A4 0090
960(ISO 8765)
With shank, metric fine thread
Steel, Zinc/Nickel,10.9
0263 4 06 5621
With shank, metric extra fine thread
Steel, Zinc, 8.8 0064 06 5641
961(ISO 8676)
Thread up to the head, metric fine thread
Steel, Zinc/Nickel,10.9
0263 5 06 5602
Thread up to the head, metric extra fine thread
Steel, Zinc, 8.8 0064 06 5622
Coach Bolts With Nut - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page603(ISO 8677) Coach bolts,
including nuts
Steel, Zinc, 4.8 (incl. nut)
0223
06 5781AS 1390 - AS 1112
Steel, Zinc, 4.6 (incl. nut)
NBB00008
603(ISO 8677)
Coach bolts,without nuts
Stainless Steel A2 0226
Threaded Rod - MetricDIN Figure Symbol Description Material/Finish/Tensile Art. No. Prefix Cat. Page
976-1 Threaded rod
Steel, Zinc, 4.8, (1 metre)
0958
06 6021Stainless Steel A2 (1 metre)
0954
Stainless Steel A4 (1 metre)
0953
OVERVIEW OF DIN AND STANDARD PARTS
Fasteners
55MAINTENANCE INDUSTRY
W-KLT BINS
• For a clear overview of C - Parts storage• Indicator function for safety: lid open = bin in use• Optimised access through front lid with bar• Requires up to 50% less rack space• Requires up to 50% less floor space• Up to 80% less spoiling of goods
• Circumferential stacking rim, recessed grips and reinforced floor
• Available in three sizes, in accordance with the VDA standard (W-KLT® 2115, 3215 and 4315)
56 MAINTENANCE INDUSTRY
Polyester styrene free, anchoring adhesive. WIT P200, 420 ml, incl. 1 static mixer.Art. No. 5918 200 420
Advantages :• No expansion stress on the concrete: Anchor close to the edges, close
anchor spacings.• Resealable for multiple uses. Therefore can be used up to the end of its
shelf life.• Seals drill holes and thus protects metal reinforcement.• Indoor usage due to low odour (styrene free).
Characteristics :
Temperature of Concrete
Gelling - Working Time
Min. Curing Time in Dry Concrete
5 oC to 10 oC 25 min 2 h
10 oC to 19 oC 15 min 80 min
20 oC to 29 oC 6 min 45 min
30 oC to 34 oC 4 min 25 min
35 oC 2 min 20 min
Key Features :• For use in concrete, solid brick and perforated brick.• Medium duty load applications.• For indoor or outdoor use including wet drill holes.
Cat. Page 06 2131 WIT-P 200
Fasteners
Anchor Dimensions M8 M10 M12 M16 M20
Overall Length(for threaded rods)
l (mm)110 130 160 190 260
Max. Attachment Thickness(for threaded rods)
h (mm)20 30 35 45 60
Art. No.Anchor Stud, Complete with Washer & Nut, Zinc
5915 108 110 5915 110 130 5915 112 160 5915 116 190 5915 120 260
Art. No.Anchor Stud, Complete with Washer & Nut, Galvanised Steel
0905 413 081 0905 413 101 0905 413 121 0905 413 161 0905 413 201
Packing Unit Pack Qty. 10 10 10 10 10
57MAINTENANCE INDUSTRY
Sieve Sleeve
Description Art. No. Image Pack Qty.
Blow Out Pump 0903 990 001 A 1
Application Gun 0891 003 104 B 1
Static Mixer 0903 420 001 C 10
Brush Set - 2 pcs 0903 990 002 D 1
A
C D
Description Dimensions(mm)
Art. No. Image PackQty.
DrillDia (mm)
Drill Hole Depth (mm)
Suitable For MortarContent (mm)(see graduation on cartridge)
Thread Bar Internal Screw Thread Sleeve
Sieve Sleeve Plastic
16 x 85 0903 44 160 10 16 90 M8, M10 - 12
16 x 135 0903 44 161 10 16 140 M8, M10 - 16
20 x 85 0903 44 200 10 20 90 M12 M10, M12 20
Cat. Page 06 2132 WIT-P 200 ACCESSORIES
Fasteners
Cat. Page 06 3721 ASSY PLUS A2/A4 DECKING SCREW
The screw for fastening decking boards. Many types of wood can be processed without pre-drilling thanks to the drilling tip. Pre-drilling is recommended for hardwoods*.Material: A2/304 or A4/316
Small countersunk head with under-head pockets.• The head can be sunk very easily and
cleanly with a small diameter. • The under-head pockets pick up protruding
chips. • However, with tropical hardwoods,
countersinking of the surface is recommended, as the wood has very short chips.
ETA-11/0190
dmm
L mm
bmm
dkmm
Drive A2/304 P. Qty. A4/316 P. Qty.Art. No. Art. No.
5.550 27
7.5 AW 200166 105 550 1,000 0169 005 550
25070 37 0166 105 570 250 0169 005 570
Container for 50mm A2/304 Decking Screw. Holds 1,000 screws.
58 MAINTENANCE INDUSTRY
The Wurth Zinc Nickel surface is highly corrosion resistant and is in line with the Australian Corrosion resistance class III. (AS. 3566-2).
Based on International Standards (ISO 9223), the Zinc Nickel surface is classified as a Class 5 corrosion resistant coating.
ISO 9223 is an accordance with AS 3566-2(Australian Corrosion Categories)• The ASSY® screw combines the stability of a steel screw with excellent
rust protection.• Suitable for use outdoor covered areas, ie. pergolas, carports etc.
(covered, open structures). It's coating gives the ASSY® a high-quality appearance.• Attention: Screws may not be used for
– Wood containing large amounts of tannic acid, – Boiler-pressure impregnated wood
• Chrome-VI-free.
dia.in mm
Lin mm
bin mm
dkin mm
Bit Endmill
Art. No. PackQty.
6.0 50 32 12.00 AW 30 with 0170 860 50 2506.0 80 50 12.00 AW 30 with 0170 860 80 1006.0 100 60 12.00 AW 30 with 0170 860 100 1006.0 120 70 12.00 AW 30 with 0170 860 120 1006.0 150 70 12.00 AW 30 with 0170 860 150 100
ETA-11/0190
Cat. Page 06 3722 ASSY 3.0 ZINC-NICKEL
Fasteners
The ASSY® 3.0 A2 of corrosion-resistant, austenitic stainless steel is designed especially for applications outdoors, in damp rooms and in salty atmospheres.
Tip: Ring thread → Minimal splitting effect, especially when screwing in near the edge
Thread: Asymmetrical coarse thread for short screw-in times.
Head: Milling pockets for clean countersinking.AW® drive.
Material: Corrosion-resistant, austenitic stainless steel A2 (1.4301; 1.4567).
Note: Pre-drilling to the core diameter in solid hard woods. ASSY® 3.0 A2 are conditionally resistant to acid and are not suitable for use in atmospheres containing chlorine gas.
Bit c
olou
r
Countersunk head* w/shaft
d inmm
l inmm
dk inmm
b inmm
A2 Pack Qty.
Art. No.
6.0
60
12.0
37
AW
® 3
0
0180 106 60 20080 50 0180 106 80
100100 60 0180 106 100120 70 0180 106 120140 70 0180 106 140
Cat. Page 06 3731 ASSY 3.0 A2
59MAINTENANCE INDUSTRY
Advantages:• Fast, low-cost installation.• No searching for the matching screw through pre-assembly.• For use in through-bolt mounting.• Can be released again through drive in screw head.• No premature spreading thanks to integrated and defined knock in lock.
Countersunk Head (Type SK)Nail Steel, ZincFlat Head (Type FK)Nail Steel, Zinc
Cat. Page 06 2251 ZEBRA NAIL PLUGS
Fasteners
Wall Plug DimensionOverall Length l(mm) 30 40 35 50 60 70 60 80 100 120 135
Max. Attaching Height da(m) 5 15 10 20 30 50 20 40 60 80 95
Description
W-Z
ND
5 x
30
W-Z
ND
5 x
40
W-Z
ND
6 x
35
W-Z
ND
6 x
50
W-Z
ND
6 x
60
W-Z
ND
6 x
70
W-Z
ND
8 x
60
W-Z
ND
8 x
80
W-Z
ND
8 x
100
W-Z
ND
8 x
120
W-Z
ND
8 x
135
Countersunk Head (type 5K)Nail Steel Zinc
0906
315
30
0906
315
40
0906
316
35
0906
316
50
0906
316
60
- 0906
318
60
0906
318
80
0906
318
100
- 0906
318
140
Flat Head (type FK)Nail Steel Zinc
0906
305
30
- 0903
306
351
0903
306
503
- - - 0906
308
80
- - -
Packing Unit Pack Qty. 200 100
60 MAINTENANCE INDUSTRY
Cat. Page 06 2171 AMO III SCREW 7.5MM DIAMETER
AMO®
1. Applications:• Tension-free spaced mounting for wooden, plastic and aluminium window frames .• Frame coupling.• For light duty loading.• Door frames, kitchen parts, window frames.• Ideal for fixing timber to concrete/brick, frame work, bottom plates to
floors.
2. Advantages:• Short installation times, as no setting tools are required.• Thanks to AW® drive, longer bit service life, improved force transmission and no ejection forces.• Removable.• Virtually no spreading forces during setting.
3. Properties:• Spreading pressure free, positive locking and removable anchoring.• Function of load pick-up is retained even under thermal loading.• Tested fire-resistance duration of 120 minutes.
Fasteners
Maximum Working Load (kN) in Tension
1kN=100kg
Dowel Type Embedment depth (mm)
Type 1 Type 2 Type 3
Tensile Load
30 0.8 - 0.8
40 1.3 - 1.3
50 1.6 - 1.6
Transverse or oblique pull up to 30o
30 0.5 0.5 0.5
20 MPa Concrete Grade
06 1552AU
S/m
etal
- pub
09/
09 -
©
55.1
0234
930 7
2
– 0234
930 1
02
0234
930 1
52
0234
830 7
2
0234
830 8
2
0234
830 1
02
0234
830 1
52
0234
730 7
2
– 0234
730 1
02
0234
730 1
52
72 82 102
152
Dowel dimensions
Total length l [mm]
Packing unit P. Qty. 200
Type 1 with AW30Head diameter 12.0 mm
Suitable application:Light countersinking with wood and plastic profiles
Type 2 with AW30Head diameter 8.0 mm
Suitable application:Preferably for use in concrete surface with the frame materials wood and plastic
Type 3 with AW30 Head diameter 12.5 mm
Suitable application: Thanks to the large flat head, the head makes clean contact on window profiles, providingadvantages when using cover capsSuitable cover caps: Art. No. 0590 790 …
Art. No.Galvanised steel, blue passivated
Art. No.Galvanised steel, blue passivated
Art. No.Galvanised steel, blue passivated
Amo® III Screw 7.5 mm dia.
Performance dataDowel type Type 1 Type 2 Type 3
F30 [kN] 0.80 – 0.80F60 [kN] 0.55 – 0.55F90 [kN] 0.45 – 0.45F120 [kN] 0.40 – 0.40F30 [kN] 0.50 0.50 0.50F60 [kN] 0.50 0.50 0.50F90 [kN] 0.50 0.50 0.50F120 [kN] 0.50 0.50 0.50
Characteristic valuesConcrete cmin [mm] 50
Chalky sandstone, solid brick, vertically perf. brick (at least 2 walls), pumice, 60light concr., aerated concr., coniferous wood
Concrete hnom,min[mm] 30
Chalky sandstone, solid brick 50
Vertically perf. brick (at least 2 walls), pumice,light concr., aerated concr., coniferous wood 60
Concrete d0 [mm] 6.5
Chalky sandstone, solid brick,vertically perf. brick (at least 2 walls), 6.0pumice, light concrete
Aerated concrete, coniferous wood No pre-drilling necessary
Drill hole depth h1 [mm] Screw-in depth + 10 mm + any existing plaster layer
Centred tensile load
Transverse or oblique pull up to 30°
Fire resistance durationConcrete strengthclass at least C20/25 and maximum C50/60
Minimum edge spacing
Minimum screw-in depth
Nominal drill-bit diameter
cmin [mm]
hnom,min[mm]
d0 [mm]
0234
730 5
252
--
I (mm)
52 72 82 102
152
Art. No. Galvanised steel, blue passivated
0234
730
52
0234
730
72
-
0234
730
102
0234
730
152
Art. No. Galvanised steel, blue passivated
-
0234
830
72
0234
830
82
0234
830
102
0234
830
152
Art. No. Galvanised steel, blue passivated
-
0234
930
72
-
0234
930
102
0234
930
152
P.Qty. 200
61MAINTENANCE INDUSTRY
Art. No. 0539* ZEBRA HOSE CLAMPS – 9MM
9mm Band Width.
• Off-set head style.• SW7mm
Advantage:Asymmetrical body.• Even distribution of force.• Clamp head does not tilt away during tightening.Smooth strap interior with rounded edges to prevent hose damage.
Clamping Range mm
Recommended Tightening Torque Nm
Hose Clamp Set Contents
Art. No. PackQty.
8 - 12*3.5
- 0539 28 12
25/50/100
10 - 16* - 0539 210 168 - 16 2 +0.5 20 0539 18 1612 - 22
3 +0.5
10 0539 112 2216 - 27 20 0539 116 2720 - 32
100539 120 32
25 - 40 0539 125 4030 - 45 - 0539 130 4532 - 50
10
0539 132 5040 - 60 0539 140 6050 - 70 0539 150 7060 - 80 0539 160 8070 - 90 0539 170 90
Technical Data
Material of Strap/Body 1.4016 Stainless Steel F1Material of Screw Galvanised Steel, Passivated, SealedScrew Type Phillips Head, SW7Strap Width 9mm
Description Contents Art. No. PackQty.
Zebra Hose Clamp Set, 9mm, SW7mm.
10 sizes from 8 - 16 to 70 - 90mm =120 clamps 1 Zebra Screwdriver withFlexible Shaft, Art. No. 0613 286 071 Wall Mounting Set.
0539 120 7 1
Partner Product:Zebra Flexible Screwdrivers - SW6, SW7
9mm Band Width.
* "Power" Hose Clamp. SW6 head. High tightening torque -3.5Nm.
Cat. Page 06 0598 ZEBRA HOSE CLAMP SET – 9MM
Cat. Page 06 0598
Fasteners
Use this handy QR code to view our Hose Clamp Product Demonstration, or visit www.wurth.com.au
62 MAINTENANCE INDUSTRY
Unbeatable battery power for energy-intensive jobs.
Flexible usesHigh capacity combined with a long service life.
EfficientParticularly recommended for devices with a high power requirement.
EconomicalLonger usage times and constant energy output at the highest level.
Good shelf lifeVery low self-discharge with a shelf life of 5 years.
Not rechargeable.
Description Voltage (V) Art. No. P. Qty.Alkaline AAA / Micro / LR03
1.5
0827 111 4/60Alkaline AA / Mignon / LR6 0827 112 4/40Alkaline C / Baby / LR14 0827 113 2/10Alkaline D / Mono / LR20 0827 114 2/10Alkaline / E Block / 6LR61 9 0827 115 1/20
Description System Voltage (V) Dia x Hin mm
Type. Art. No. P. Qty.
V V44 / LR44 Silver Oxide 1.5 11.6 x 5.4 a 0827 08 13
1/12
V23, A23, MN21 Alkali-magnanese 12 10.3 x 28.5 b 0827 08 23
CR/DL 1616 Lithium 3 16.0 x 1.6 c 0827 081 616CR/DL 1620 Lithium 3 16.0 x 2.0 c 0827 081 620CR/DL 2025 Lithium 3 20.0 x 2.5 c 0827 082 025CR/DL 2032 Lithium 3 20.0 x 3.2 c 0827 082 032CR/DL 2450 Lithium 3 14 x 4.9 c 0827 082 450
(b)(a)
Top quality cell batteries for use with vehicle remote controls and other electrical devices.
• Only minor auto discharging.• Can be used in large temperature range.• High system voltage.• Good shelf life:
for silver oxide > 2 years for alkali-manganese > 3 years for lithium cells > 5 years
(c)
Cat. Page 07 2001 “HIGH POWER” ALKALINE & CELL BATTERIES
Electrical
ELECTRICAL 07
63MAINTENANCE INDUSTRY
Art. No. 0942 1* RIVET NUTS WITH COUNTERSUNK FLANGE
Art. No. 0502* CABLE TIES NYLON
DIN 472Material: Stainless steel.Grade: A2/304 Class: 70 A2
dmm
RivetableThickness
Lmm
A2Art.No.
Pack Qty.
M4 .3 - 2.0 10.5 0942 1425/50/100
M5 .3 - 2.0 11.5 0942 15M6 .3 - 2.0 13 0942 16M8 .3 - 2.0 15.5 0942 18
Cat. Page 06 2571
Size TensileStrength(kg)
Art. No.Black
Art. No.Natural
PackQty.W
mmLmm
Total Ø ofbundle (mm)
2.5 100 24 11 0502 111 0502 11
100
3.5 140 36 20 0502 121 0502 123.5 200 55 20 0502 131 0502 133.5 280 80 20 0502 135 1 -4.5 180 38 28 0502 141 0502 144.5 280 76 28 0502 151 0502 154.5 360 101 28 0502 161 0502 167.5 200 48 65 0502 171 0502 177.5 360 101 65 0502 181 0502 189 780 260 79 0502 762 - 5012.5 500 140 79 0502 191 0 -
Cat. Page 07 7501
Art. No. 0502* CABLE TIES STAINLESS STEEL
• 304 (A2) Stainless Steel.• Not removable.
Size Art. No. PackQty.W
mmLmm
Total Ø ofBundle mm
4.6 200 50 0502 946 200
1004.6 360 102 0502 946 3607.9 200 50 0502 979 2007.9 360 102 0502 979 360
Cat. Page 07 7501
Electrical
64 MAINTENANCE INDUSTRY
WURTH SELECT A VENDING MACHINE PROGRAM
In today’s fast paced and competitive environment, organisations require efficient and effective solutions for procurement, coupled with strong visibility for cost control to achieve best practise management.
Working with Nat Vend, a leading organisation of simple, easy, affordable and cost-effective inventory solutions, Wurth are pleased to introduce Wurth Select.
Wurth Select provides operators the convenience of a vending machine with industry leading products and consumables.Just imagine, an independent, cashless vending machine operating 24 hours per day, 7 days per week in your remote site providing your team products when they require it with no manual intervention.
Combined with a web-based reporting service which enables you to see who is using what items and when.
Wurth understands and appreciates the need to protecting your bottom line, “knowing who took what” is the only answer and Wurth Select can do this for you and your team.
• Convenient • Cashless • 24/7 Access • Cost Saving
65MAINTENANCE INDUSTRY
Premium Safety Glasses.
• Adjustable side arms, with lock (A).• Fashionable one piece wrap around design providing side protection.• Nylon frames. Scratch resistant, Polycarbonate lens.• New anti-fog coating. Medium impact.• 99% UV Protection. AS/NZS 1337.• Safety and comfort. Ensures compliance by workers to OHS.
Standard Safety Glasses.
• Modern one piece wrap around design providing side protection.• Scratch resistant, Polycarbonate lens.• Medium impact. 99% UV Protection.• AS/NZS 1337. Safety and comfort.• Ensures compliance by workers to OHS.
PROTEGO® Safety Glasses.
• Fashionable design.Composite-wrapped on arms and nose piece for maximum wearing comfort.
• Adjustable formation nose piece to suit all face types.• Scratch resistant, Polycarbonate lens.
Description Art. No.PROTEGO® Safety Glasses - Black 0899 107 130PROTEGO® Safety Glasses - White 0899 107 131
Cat. Page 09 0501 SAFETY GLASSES
Safety
Premium Art. No.Clear 0899 103 110Tinted 0899 103 111Amber 0899 103 112Copper - Indoor/Outdoor 0899 103 113
Standard Art. No.Clear 0899 103 120Tinted 0899 103 121Amber 0899 103 122Copper - Indoor/Outdoor 0899 103 123
PERSONAL PROTECTIVE EQUIPMENT 08
66 MAINTENANCE INDUSTRY
• Conical shape and rounded tip.• Moulded, smoother surface.• Soft compressible material.• Controlled expansion.• Easy to insert.• Hygienic and comfortable.• Excellent protection for the wearer.• Low pressure in ear canal.• Made from non-toxic, non-irritating polyurethane foam.• Comfortable to wear for extended periods of time.• Lightweight.• Individually wrapped for your protection.• Complies with AS/NZS1270-1988 SLC80: 27 dB, Class 5.Description Contents Art. No. Pack Qty.
Foam Earplugs 200 pairs 0899 300 331 1
Description Contents Art. No. Pack Qty.Foam Earplugs With Cords
100 pairs 0899 300 332 1
Disposable ear plugs made of PU foam. Specially designed for increased comfort over long periods and maximum Class 5 protection.
Cat. Page 09 0523 FOAM EARPLUGS - CORDED / UNCORDED
Safety
Special folding design provides maximum comfort and hearing protection while allowing the user to fold away and store the earmuffs in the minimum amount of space.
• SLC (80) rated 32 dB (Class 5) over the head.• AS/NZS 1270:2002 approval. • Soft covering on cups helps muffle noise.• Sleek contoured and low profile shaping.• Headband made of lightweight plastic for comfort.• Cup adjustment is infinitely variable, distributing pressure evenly.• Keeps ears warm in cold environments.• Di-electric for use around high voltage.• Comfort when using for long term protection.• Compliance by workers to OHS.• Clamping force 10.2 Nm.• Lightweight. Only 237 g.
Descriptions Art. No. Pack Qty.Ear Muffs 0899 300 286 1
Cat. Page 09 0524 EAR MUFFS
67MAINTENANCE INDUSTRY
P1 Mask• To AS1716• Intended for use against mechanically generated dusts and mists.• Lightweight.• Box of 20 only.
Description Art. No. Pack Qty.P1 Respiratory Protection Mask 0899 110 400 20
P2 Mask• With valve.• To AS1716• Intended for use against mechanically and thermally generated dusts,
mists and fumes.• Exhalation valve gives greater user comfort.• Lightweight.• Box of 10 only.
Description Art. No. Pack Qty.P2 Respiratory Protection Mask 0899 121 100 10
Cat. Page 09 0561 RESPIRATORY PROTECTION MASKS
Safety
Cat. Page 09 0591 PVC CHEMICAL GLOVES
• Single dipped.• Suitable for use with oil and water based paints, dilute acids, dilute caustics, pool chemicals and house hold cleaning chemicals.
Description Size Art. No. Pack Qty.PVC Chemical Gloves - pair
Short (27 cm) 0899 430 2241
Long (45 cm) 0899 430 225
68 MAINTENANCE INDUSTRY
Cat. Page 09 0592 / 0621 DISPOSABLE NITRILE GLOVES
• Nitrile protective glove / black.• Tested as food-safe• Does not contain allergy-triggering latex proteins.• Silicone-free manufacturing process.• Powder-free.• Can be worn on either hand.• Material thickness: Finger: 0.11 - 0.16 mm. Palm: 0.09 - 0.12 mm. Cuff: 0.06 - 0.09 mm.• Total length: 240 mm.
Size Art. No. Pack Qty. 8/M 0899 470 398
1009/L 0899 470 39910/XL 0899 470 400
EN 420 / Cat.1 - food safe.
• Nitrile protective glove.• Can be worn on either hand.• Powder-free.• Silicone-free manufacturing process.• Finger textured, beaded cuff.• Material thickness: Finger: min. 0.11+/- 0.02 mm.
Palm: min. 0.07+/- 0.02 mm.• Total length: 240 mm.• CE cat. 1 certified in accordance with:
- EN 374 (Chemical penetration and permeation). - EN 420 (General glove standards).
Size Art. No. Pack Qty. M 0899 470 01
100L 0899 470 02XL 0899 470 03
Safety
Cat. Page 09 0592 CHEMICAL PROTECTION GLOVES
Material: Nitrile rubberColour: Green Length: 33cm• Universal protective glove for chemicals.• Good mechanical strength.• Very comfortable to wear.• Good grip under wet conditions.• International rating: CE 0493
Description Size Art. No. Pack Qty.Chemical Protection Gloves - pair
M 0899 435 08
1L 0899 435 09XL 0899 435 10XXL 0899 435 11
69MAINTENANCE INDUSTRY
Art. No. 0899 405 0* BLACK MECHANIC'S GLOVES
Art. No. 0899 400 295 GENERAL PURPOSE WORK GLOVES
Art. No. 0899 402 15* LEATHER RIGGER'S GLOVES
• Conforms to EN 420 and EN 388 standards.• Seamless nylon liner with latex coating.• Breathable open hand back.• Good abrasion resistance.• Very good grip and dexterity.• Silicone free.• CE/CAT.II/Performance values: 2131.
Description Size Art. No. Pack Qty.
Mechanic’s Gloves - pair
8/M 0899 405 0281/69/L 0899 405 029
10/XL 0899 405 030
Cat. Page 09 0571
• General Purpose• Work Gloves - pair Leather palm, cotton back.• Universal application.
• Fullgrain cowhide leather• Elastic wrist backing.• Premium quality and thickness.• Beige.• Compliance with EN 388 (2133).
Description Size Art. No. Pack Qty.
Wurth LeatherRiggers Gloves - pair
M 0899 402 149
1L 0899 402 150XL 0899 402 151XXL 0899 402 152
Cat. Page 09 0591
Cat. Page 09 0591
Description Art. No. Pack Qty.General Leather Gloves 0899 400 295 1
Safety
70 MAINTENANCE INDUSTRYAll Wurth signs are made from high quality sheet metal.
Size: 450 x 450 mmArt. No. 0899 075 170
Size: 450 x 225 mmArt. No. 0899 075 171
Size: 600 x 450 mmArt. No. 0899 075 172
Size: 600 x 450 mmArt. No. 0899 075 173
Size: 450 x 450 mmArt. No. 0899 075 174
Size: 600 x 450 mmArt. No. 0899 075 175
Size: 450 x 300 mmArt. No. 0899 075 176
Size: 450 x 600 mmArt. No. 0899 075 177
Size: 140 x 80 mmHeavy Duty PVC TagsPack of 25 onlyArt. No. 0899 075 178
Size: 140 x 90 mmCardboard TagsPack of 100 onlyArt. No. 0899 075 179
Size: 150 x 600 mmArt. No. 0899 075 181
Safety
Section 9 WORKPLACE SAFETY SIGNAGE
71MAINTENANCE INDUSTRY
All Wurth signs are made from high quality sheet metal.
PLEASE LEAVE THISLUNCH AREA CLEAN
KEEP CLEAN
Size: 300 x 225 mmArt. No. 0899 075 182
Size: 300 x 450 mmArt. No. 0899 075 183
Size: 450 x 600 mmArt. No. 0899 075 184
Size: 225 x 150 mmArt. No. 0899 075 187
Size: 300 x 450 mmArt. No. 0899 075 185
Size: 300 x 450 mmArt. No. 0899 075 180
Size: 145 x 350 mmLuminous MetalArt. No. 0899 075 186
Size: 75 mm x 50 mBarrier TapeArt. No. 0899 075 188
Size: 75 mm x 50 mCaution TapeArt. No. 0899 075 189
Extendable Cone Bar onlyArt. No. 0899 075 193
Standard Traffic Cone - 470 mmArt. No. 0899 075 191
Reflective Traffic Cone - 470 mmArt. No. 0899 075 192
Safety
Section 9 WORKPLACE SAFETY SIGNAGE
72 MAINTENANCE INDUSTRY
ORSY SCAN
73MAINTENANCE INDUSTRY
Much more than just a rack… Wurth ORSY! Wurth understand that 80% of consumable costs are contained within procurement and handling processes with only 20% of the value being the actual raw cost of the product itself.
Wurth is focussed on optimising operational efficiency to deliver real value to customers, through systems such as ORSY, Wurth Select and Wurth In Time.
ORSY ASSORTMENTS 09
74 MAINTENANCE INDUSTRY
Section 10 ORSY 100 ASSORTMENTS
Hexagon Head Screws and Hexagon Nuts UNC A2/304460 pcs - Art. No. 0964 072 1
Zebra Rivet Nuts/Countersunk Steel, Zinc and Gun506 pcs - Art. No. 0964 906 001
B2000 Hole Saws16 pcs - Art. No. 0964 632 901
Twist Drill Assortment HSS, DIN 338 Type N, short, Tip 118°155 pcs - Art. No. 0624 090 005
High load bearingcapacity.
Secure grip. Modular design.
Wurth Assortments. The ORSY 100 Assortment case features a compact and handy system for organised storage and provision of various small items. Individually adaptable to your needs and applications.
ORSY, Assortments
75MAINTENANCE INDUSTRY
AIR & POWER TOOLS 10Just as industry legend Dick Johnson tackled the race track with strength and endurance, Wurth Master Tools are changing the way in which workshops all around the country rely on powerful and robust tools.
With industry leading cordless battery technology providing extended runtime and class leading torque, Wurth Master Tools are a must for any workshop.
Just ask the team at Dick Johnson Racing, they know what quality is.
Wurth Master Tools – Professional Tools for the Professional User.
76 MAINTENANCE INDUSTRY
Long-life 5" Angle Grinder with automatic brush switch off.
• Powerful 750W motor delivering up to 10,000 rpm.
• Compact and slim design for comfortable use.• Light weight grinder weighing only 1.8kg.• Especially long life when compared with other
grinders in its category.• Burst resistant safety guard for best user
protection.• Auto brush switch off function to enhance tool
durability.• 4m cable for ultimate flexibility and working
reach.
Includes:Side handle, guard and spanner
Description Art. No. Pack Qty.
125mm (5") Angle Grinder - 750W 0702 481 0 1
Cat. Page 11 2907 125MM (5”) ANGLE GRINDER - 750W
Air & Power Tools
Art. No. 0700* 12V MASTER TOOL RANGE
12V 2-Speed Percussion Drill Art. No. 0700 113 019
12V 3/8" Impact Wrench Art. No. 0700 123 019
12V Grease Gun Art. No. 0700 124 09
The Wurth Master selection of high-quality manufacturer-direct power tools is designed to stand up to the rigours of the automotive, metal fabrication, construction and transport industries.
The 12V cordless Wurth Master range provides the best power-to-weight ratio on the market, and 240V corded tools deliver the high performance
customers associate with the Wurth name. Backed by quality German engineering and a two-year warranty, the exclusive and expanding range of Wurth Master power tools is only available direct from Wurth.
View the online catalogue today to see the real benefits in using a professional Wurth Master Tool.
77MAINTENANCE INDUSTRY
12V 3.0Ah High Capacity Battery Art. No. 0700 913 630
12V Lithium-ion Battery Charger Art. No. 0700 916
1.5Ah
12V 1.5Ah High Capacity Battery Art. No. 0700 913 615
3.0Ah
12V Batteries and Charger
12V Reciprocating Saw Art. No. 0700 203 019
Air & Power Tools
Art. No. 0700* 12V MASTER TOOL RANGE
Art. No. 0700* 18V MASTER TOOL RANGE18V MASTER TOOL RANGE
18V 2-Speed Percussion Drill Art. No. 0700 745 09
18V Angle Grinder Art. No. 0700 785 09
18V Batteries and Charger
18V 4.0Ah High Capacity Battery Art. No. 0700 913 740
18V Lithium-ion Battery Charger Art. No. 0700 917
18V 1.5Ah High Capacity Battery Art. No. 0700 913 715
18V 1/2” Impact Wrench Art. No. 0700 725 09
18V 3/4” Impact Wrench Art. No. 0700 735 09
18V 1/4” Hex Impact Driver Art. No. 0700 716 09
78 MAINTENANCE INDUSTRY
Art. No. 0715 66 013 SAFETY KNIFE
Art. No. 0715 66 015 RETRACTABLE KNIFE
Art. No. 0715 66 02 KNIFE BLADES
Suit Retractable and Safety Knives
• One box contains 10 blades.• Blades suit Retractable/Safety Knife.
Cat. Page 12 2521
Lock out position for cutting, retractable via manual slide.
• Blade changed in seconds without tools thanks to magnetic retainer.• Ergonomic, non-slip two-component handle.• Integrated blade magazine for five blades.
Automatic blade retraction via retracting spring.
• Blade changed in seconds without tools thanks to magnetic retainer.• Ergonomic, non-slip two-component handle.• Integrated blade magazine for five blades.
Cat. Page 12 2521
Cat. Page 12 2521
HAND TOOLS 11
79MAINTENANCE INDUSTRY
Art. No. 0715 53 110 INFRARED LASER THERMOMETER
Cat. Page 12 5561
For touch-free measurement of surface temperatures, with integrated laser pointer.
• Ergonomic, practical and suitable for use anywhere. Easy measurement of temperatures in just seconds.
• Thanks to the two-point laser beam, the measuring point can be focused even more precisely.
• Reliable, precise measurement.• Extremely slim measuring cone of 12:1. The slimmer the measuring cone, the more accurate the measuring
result (e.g. for a distance of 12 cm, the measuring diameter is 1 cm).• Digital setting of degree of emission.• Can be switched from Celsius to Fahrenheit.• With integrated display lighting.• Display of results with one decimal place.• Adjustable alarm with extremely high or low temperatures.
Hand Tools
Cat. Page 12 1561 VDE SCREWDRIVER PHILLIPS (PH)
Blade: Gunmetal finish, insulated. Tip: DIN 5260-PH, ISO 8764-PH.Standard DIN 7438, IEC 900, EN 60900.
• Routine check test in a water bath with test voltage 10 kV.• For work under voltages up to 1,000 volts (AC), up to 1,500 volts (DC).• Identification marking with year of manufacture.• Stricter low-temperature impact test.
Wide range of VDE tools available.
Amm
B/Cmm
Ainch
Art. No. Pack Qty.
80 83/27 3 1/8" 0613 632 0
1PH 1 80 96/31 3 1/8" 0613 632 1PH 2 100 106/35 4" 0613 632 2PH 3 150 114/38 6" 0613 632 3PH 4 200 114/38 8" 0613 632 4
Art. No. 0714 663 35 SCRAPE BLADE HOLDER 2C HANDLE
Ergonomic scraper blade with non slip 2-component handle.
• Includes 6 scraper blades. Robust stainless steel blade holder.• Features a removable blade protector.• Ideal for removing labels, window adhesive, paint and cleaning glass
cooktops.
Cat. Page 12 2522
80 MAINTENANCE INDUSTRY
Art. No. 0965 13 900 TWIST SOCKET WRENCH 1/2" DRIVE SET
Set of 13 sockets and special tool for the extraction of damaged screws and bolts.
Socket Wrench: 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27
Cat. Page 12 0646
Art. No. 0714 03 14 COMBINATION SHEARS
Cat. Page 12 2541
• Right/Left Hand Cutting
Inflatable bag to aid in window and door installation and for creating work space in tight spots.Material: Fibre-reinforced plastic. Load-bearing capacity: 100 kg per bag. Joint width: 3–50mm. • Avoid scratches – the soft air cushion is easy on the frames and painted
surfaces. Easy, precise positioning of the doors and windows.• Fully re-usable. Joints are left completely empty and are immediately
ready for mounting components or joint fillers.
Art. No. 0715 67 80 AMO BAG
Ideal for: Installation of doors, positioning windows, lifting doors, positioning cabinets.
Cat. Page 12 5582
Hand Tools
Use this handy QR code to view our Amo BagProduct Demonstration, or visit www.wurth.com.au
81MAINTENANCE INDUSTRY
Art. No. 0613 489 2 PRECISION SCREWDRIVER SET
Drive Thicknessmm
Widthmm
Lengthmm
0.30 1.5 400.4 2.0 600.4 2.5 750.5 3.0 75
Drive Tip Size
PH 00
PH 0
PH 1
• Screwdriver set in plastic cassette Slotted and Phillips Screwdriver Rotating handles tops.
• Oversized handle for easy grip.• Packaged in quality case for easy storage.
Cat. Page 12 1631
Art. No. 0984 990 300 GAS SOLDERING TORCH
Cat. Page 12 6001
A handy butane powered soldering iron for general soldering work. Also suitable for the application of heatshrink or shrinking connectors. Supplied in a case with 5 different tips and solder wire.
• A handy all-rounder: Can be used as a soldering iron or hot-air unit.
• For soldering, welding, tin-plating work etc.• Convenient Piezo ignition.• Continuously adjustable power level.
Hand Tools
Locking pliers with automatic self-adjustment to various material thicknesses with consistent clamping force.• Annoying, time-consuming adjustment of clamping width is eliminated.• Smooth-action release lever with spring mechanism.• One-hand operation – pulling instead of pressing.• Fast, simple adjustment of the jaw clamping force.• The clamping force can be individually adjusted as required.• Simple, reliable locking of the pliers.• The pliers remain securely closed until they are unlocked.• With wire cutters.
Total Length in mm
Clamping jaw clamping width in mm
Art. No. Pack Qty.
160 0 - 32 0714 09 060 1
Cat. Page 12 2053 AUTOMATIC LOCKING PLIERS : SEMI-CIRCULAR JAWS
82 MAINTENANCE INDUSTRY
Comprehensive set featuring all common hand tools required for most jobs.
Tools of the highest quality.Most components in the case are from the ZEBRA range, the top quality line within the Wurth handtool family.
Extremely versatile set.All common handtools in the one case makes this set suitable for almost any application.
Durable and sturdy case.High quality polymer case with folding aluminium clasps.Dimensions: 423 x 360 x 86 mm.
Contents of Tool SetDescription P. Qty.ZEBRA® combination spanner
11 parts: 8, 9, 10, 11, 12, 13, 14, 16, 17, 19, 22 mm
1
Combination piers 180 mmHammer 400 gWater Pump Pliers 250 mmVoltage tester 3.0mm 150 - 250 VoltZEBRA® 1/4" Ratchet 135 mmZEBRA® 1/4" Cardan Joint
-
ZEBRA® 1/4" Extension 50 + 100 mmZEBRA® 1/4" Socket Wrench Insert
12 parts: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
ZEBRA® 1/2" Ratchet 250mmZEBRA® 1/2 Cardan Joint
-
ZEBRA® 1/2" Extension 125, 250 mm
ZEBRA® 1/2: Socket Wrench Insert
19 parts: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 28, 30, 32 mm
ZEBRA® Screwdriver 1/4", SquareZEBRA® Straight-Blade Screwdriver
0.6 x 6.5 x 150 mm
ZEBRA® Screwdriver PH1ZEBRA® Screwdriver PH21/4" Bit Adapter -
Bit Assortment
30 parts:1 x AW 10, 25, 30/Internal Hex3,4,5 mm / TX 15, 401 Slot 4.5 x 0.6; 5.5 x 0.8; 6.5 x 1.2 mm2 x AW 20 / PH1, 2 / PZI / TX 10, 20, 25, 303 x PZ 2
1 x Bit Holder 51 mm
Art. No. 0965 93 120 UNIVERSAL TOOL SET
Hand Tools
Cat. Page 12 0609
83MAINTENANCE INDUSTRY
L in cm
W in mm
H in mm
Art. No. Pack Qty.
6020 50
0714 644 2061
120 0714 644 212
Sturdy, low-distortion rectangular profile.
• Plexiglas level block with inlaid, corrosion-free scale rings. Excellent readability and long service life.
• Fluorescent level fluid with high resistance to UV radiation. No discoloration of fluid, extremely precise in temperature fluctuations.
• With horizontal and vertical bubble.• Red electrostatic powder coating.
Extremely smooth surface enables easy cleaning.• Sturdy light-metal profile with milled measuring surface.
High accuracy.
Measuring accuracy:Normal position Overhead measurement0.029° = 0.5 mm/m 0.043° = 0.75 mm/m
H
W
6 piece set - Firmer Chisel for the most demanding tasks, in accordance to DIN 5139
• Ergonomic two-component handle offers anti-slip, fatigue-free work.• Metal striking cap provides optimum impact force transmission and long
service life.• With polished chrome-vanadium blade for clean cutting and high
endurance.• Firmer Chisels are suitable for general work such as paring or light
mortising.Blade width
Art. No.
12mm 0715 653 41214mm 0715 653 41418mm 0715 653 41822mm 0715 653 42235mm 0715 653 43540mm 0715 653 440
Other available sizes:
Blade widthin mm
Art. No.
10 0715 653 41016 0715 653 41620 0715 653 42024 0715 653 42426 0715 653 42630 0715 653 430
Description Art. No.Firmer Chisel Set 6 piece
0715 653 400
Set Contents:
Cat. Page 12 5601 LIGHT-METAL LEVEL
Cat. Page 12 4081 FIRMER CHISEL SET WITH TWO-COMPONENT HANDLE
Hand Tools
84 MAINTENANCE INDUSTRY
Suit Pias Headsw
Gauge for screw with thread
Dmm
lmm
Weightg
Art. No.
5.5mm - M3 9 2.1 18 0614 176 7121/4” 8 - 10 1.8 20 0614 176 7137mm - M4 11 2.8 22 0614 176 7148mm 10/12 M5 12 3.5 22 0614 176 7153/8" 14 - 14 4.2 29 0614 176 71610mm - M6 14 4.2 29 0614 176 717sw
1/4” 25mm
0.5 x 3.0mm 0614 175 650
1/5
0.6 x 4.5mm 0614 175 6520.8 x 5.5mm 0614 175 6531.0 x 6.0mm 0614 175 6541.2 x 6.5mm 0614 175 6551.2 x 8.0mm 0614 175 656
1/4”
25mmPH 1 0614 176 274
1/5PH 2 0614 176 461PH 3 0614 176 648
50mmPH 1 0614 176 735PH 2 0614 176 736
73mm PH 2 0614 176 775 1/3110mm PH 2 0614 176 739 1/5
1/4” 25mm
SW3 0614 176 93
1/5SW4 0614 176 94SW5 0614 176 95SW6 0614 176 96
1/4”
26mm
AW 10 0614 511 0
1/5
AW 20 0614 512 0AW 25 0614 512 5AW 30 0614 513 0AW 40 0614 514 0
50mm
AW 10 0614 521 0AW 20 0614 522 0AW 25 0614 522 5AW 30 0614 523 0AW 40 0614 524 0
110mm
AW 10 0614 581 0AW 20 0614 582 0AW 25 0614 582 5AW 30 0614 583 0
Cat. Page 12 1681 BITS & BIT HOLDERSBits - 1/4” Hex Drive
Drive Length Type Art. No. Pack Qty.
1/4" Ext Hex 75mm 1/4" Int Hex 0614 176 702 1
Hexagon Bit Holder with Permanent Magnet
Hexagon Holder with Magnet
Hand Tools
85MAINTENANCE INDUSTRY
Rubber MalletDIN 5128 shape B.• One flat face and one round face.• With lacquered ash shaft.
Diam.mm
Length of Head
Length of Shaft mm
Weightg
Art. No. Pack Qty.
65 115 340 480 0715 734 07 1
Rubber MalletDIN 5128 shape A.• Both face flat.• With lacquered ash shaft.
Diam.mm
Length of Head
Length of Shaftmm
Weightg
Art. No. PackQty.
65 115 340 510 0715 734 08 1
Claw HammerHeavy duty claw hammer.• Deluxe soft grip handle.• Fibreglass shaft.• Fully polished head.
Weightg
Art. No. Pack Qty.
566 0715 733 045 1
Copper Mallet For use on machines or steel where the user wants to reduce the risk of damage or sparking.• Double-face type, double-flared hickory handle.
Weightg
Length ofHandle mm
Art. No. PackQty.
1000 360 0715 733 100 1
Cat. Page 12 4501 HAMMERS / MALLETS
Hand Tools
86 MAINTENANCE INDUSTRY
High quality LED headlamp which offers excellent freedom of movement, extreme durability and up to 75 hours continuous illumination.
Advantages:• Advanced focus system with twist zoom.• Lamp angle can be adjusted at 0°, 30°, 60°, 90°.• Long life due to high quality LED's.• Strong and robust mechanical design.• Up to 75 hours of continuous light (at minimum illumination level).• Batteries included.
Description Art. No. P. Qty.Hi-Power LED Headlamp 0827 809 350 1
Cat. Page 12 7025 HI-POWER LED HEADLAMP
Includes:• Head lamp × 1• Wurth design pouch × 1• AAA Alkaline × 3• User manual × 1
Hand Tools
Cat. Page 12 7025 MINI VIDEO SCOPEIdeal portable inspection tool for Automotive, Aircraft, Marine, Maintenance & Building Industries.
Built on fibreoptic, LED lamp and micro camera technology. The colour image is displayed on the units screen intergrated. No need to connect to a computer. An A\V output is included for recording purposes if required.
• Fibreoptic: Lenth 100cm, Ø 6mm• Small powerful LED makes image clear and bright.• Includes: Hook, magnet, AV cable, 3 x mirrors.
Description Art. No. Pack Qty.Mini Video Scope 0715 53 962 1
Art. No. 0715 53 370 MINI DIGITAL MULTIMETER
Robust, splash water-protected rubber housing and film keyboard. • The measurement lines can be secured to the back of the unit, which
protects them from damage by the measurement points.• Measurement capabilities include V/AC, V/ DC, resistance
(Ω), contactless voltage testing; includes permanently- attached measurement lines, data hold, diode and throughput testing, integrated LED flashlight and automatic range acquisition.
Cat. Page 12 6141
87MAINTENANCE INDUSTRY
Extremely high light output in a handy pen size unit.
• Compact and easy-to-use with one button operation.• Comes complete with both car and wall charger to allow convenient
charging in any location.• Li-ion battery provides enhanced runtime per charge.• Additional LED on bottom of unit allows the user to illuminate even the
smallest of locations.• Strong composite housing provides a durable tool that is both water
and dust resistant (IP20).• With clip and magnet, allows light to be hung from shirt pocket or car
bonnet for maximum convenience. Permits two-handed working.
Description Art. No. P. Qty.Rechargeable LED Pen Light 0827 500 010 1
Cat. Page 12 7019 LED PEN LIGHT
Hand Tools
Cat. Page 12 7023 ERGOLIGHT
An ergonomical, LED cordless work light/spotlight with long light time and high resistance to dust and water.
• 2 component housing with moulded grip.• Long light-time per charge.• IP65 Protection against dust and water.• Strong magnetic base.• Adjustable angle.• Front light and spotlight.• Double hooks for high flexibility.• Strong belt clip for easy transportation.
Technical Data:
Main LightLuminous Flux 70 lumenLight intensity @ 0.5 Metre 1000 lux
Spotlight Light intensity @ 0.5 Metre 1300 luxPower Source/Mains Line 3.7V, 2100 mAhIllumination Angle 30o
Charge time approx. 4.5 hoursDischarge time approx. 7.5 hoursGrade of protection IP65Art. No. 0827 940 124P. Qty. 1
IncludedUser manual x 1AC/DC adaptor x 1 Australian Plug Car plug adaptor x 1
Wurth Australia Pty. Ltd.
Head Office2/1 Healey Road, Dandenong South, VIC. 3175
T: 1300 65 77 65 (Local Call) F: 1800 03 23 96
E: [email protected] W: www.wurth.com.au
Branches37 Motorway Circuit, Ormeau, QLD. 4208
28 Mumford Place, Balcatta, WA. 6021
PUB15. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.