WTF Severing Tool
Transcript of WTF Severing Tool
Electric Wireline
Weatherford International Ltd.
515 Post Oak Blvd., Suite 600Houston, Texas 77027 USATel: 713-693-4000www.weatherford.com
© 2005 Weatherford. All rights reserved. 3378.00
The Weatherford drill pipe severing tool is a JRC-supplied dual-end severing
device for cutting thick-wall tubulars. The cutting technique is based on the colliding
shock wave principle. Since its inception more than 20 years ago, the JRC tool has
been continuously refined, resulting in the industry's leading severance device for
cutting drill collars and drill pipe in a wide variety of stuck pipe scenarios.
The tool's latest refinement has resulted in a standard explosive column length with
superior performance. The tool success lies in the precisely timed detonation of two
equal and opposing shock fronts. The colliding shock, designed to help focus the
energy transmitted to the target, is matched to a cartridge assembly at the mid
point of the assembly.
Features, Advantages and Benefits
Applications
Industry-leading severance device for cutting drill collars and drill pipe in a wide
variety of stuck pipe scenarios.
Drill Pipe Severing Tool
�
�
�
�
�
�
�
�
�
Standardized construction and proven design from recognized industry
manufacturer helps ensure tool reliability.
Uses widely accepted colliding shock wave principle and precisely timed
detonation.
Performance has been maximized with a newly introduced design that’s based on
dependable, industry-proven technology.
Suitable for hostile environment up to 400°F (259.45°C) and 20,000 PSI
(138,000 kPa).
Higher temperature tools are available for extreme temperature applications.
Full range of sizes are available for virtually any severing requirement.
Slim design allows pass through smaller restrictions.
Shock attenuating mandrel helps protect wireline tools.
Rapid assembly and deployment saves rig time.
Drill Pipe Severing Tool
Electric Wireline
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request orat www.weatherford.com. For more information contact an authorized Weatherford representative. Unless notedotherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to changewithout notice.
© 2005 Weatherford. All rights reserved. 3378.00
Weatherford International Ltd.
515 Post Oak Blvd., Suite 600Houston, Texas 77027 USATel: 713-693-4000www.weatherford.com
Specifications
Diameter1-3/8 in. 1-3/4 in. 2 in. 2-5/8 in.
(34.93 mm) (44.45 mm) (50.80 mm) (66.68 mm)
Temperature
Pressure
Length
Explosive pellet size 22.7 g 22.7 g 22.7 g 22.5 g
Charge load (grain) 645 1,115 1,488 2,430
3.5 in. (88.90 mm) 6.5 in. (165.10 mm) 8 in. (203.2 mm) 11 in. (279.40 mm)
DC in. DC in. DC in. DC in.Application
400°F (HMX) or 475 F (HNS)(204.44 C) (246.11 C)° °°
20,000 PSI (137,894 kPa)
36 in. (914.40 mm)
Cuts in a variety of stuck
pipe scenarios