OOvveerrhheeaadd DDiissttrriibbuuttiioonn

Fuse Service Equipment

Pole Mounted Cutouts Rated at 400A

Our industry standard unit is a very popularmodel.

Designed with ease of use and simplicity inmind, this pole mountable fused cutout isthe ideal method of providing rural dwellingswith a safe protected and reliable LowVoltage power supply.

Manufactured from our own track-resistantgrade of Glass Reinforced Polyester, thisfused Cutout is unobtrusive in appearance,but robust for outdoor applications.

Each fused Cutout includes M12 captivestuds with nuts and washers for thereception of cable sockets (lugs) up to300mm² (compression type only) withcopper or aluminium conductors.

For ease of mounting to either a wall or awooden pole, the fused cutout is suppliedwith an M12 coach screw.

Standard model

• Robust and tough design using ourown formulation of DMC.

• Slide fit front cover for ease of jointing.

• ‘Easy fit’ studs accept cable sockets(lugs) up to 300mm²

• Designed to accept standard ‘J’ typefuselinks

• Fully compliant with the requirementsof BS 7656:1993

• Fully meeting the design criteria of IP43

Note: Fuselink not included

FuselinksThis fused Cutout is designed to accommodatestandard wedge ‘J’ type fuselinks to BS 88 with82mm fixing centres.

Standard fuselink ratings range from 20 to 400A

WT Henley Church Manorway, Belvedere, Erith, Kent DA8 1EX ENGLANDA Division of Sicame UK LimitedTelephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: sales@wt-henley.com - Website: www.sicameuk.co.uk

Registered office: Church Manorway, Erith, Kent DA8 1EX United Kingdom - Registration No 3319466 VAT Registration No GB 683822508

14688 Pole Mounted Cutouts 400A:Layout 1 7/2/14 09:29 Page 1

Coach screw (supplied) or

No 8 wood screw fixing options

Spare fuse carrier (58424-06)

OOvveerrhheeaadd DDiissttrriibbuuttiioonn

Fuse Service Equipment

This version can be pole, cross arm or wallmounted, its compact size allowingoptimised arrangements resulting in lessobtrusive installations.

Mechanical terminals with shear head boltsreplace the studs usually associated withthis type of cutout, eliminating the need foradditional connecting lugs and specialisedtools to ensure a simple, safe and effectivejoint.

The terminals will accept solid or strandedaluminium and solid copper conductors inthe range 70 to 300mm². An adaptor isavailable for 25/35mm² copper oraluminium conductors.

The fuse carrier accepts ‘J’ type fuselinksto BS88 rated up to 400A.

With the PVC cable sealing grommets inplace, the cutout is IP43 rated and hasbeen designed to fully comply with theperformance requirements specified inBS7656: 1993 for LV pole mounting fuses.

The enclosure is moulded in our own highperformance, glass reinforced polyester,renowned and proven worldwide.

Compact model

• Compact design for optimisedmounting arrangements.

• Mechanical terminals require noadditional lugs.

• Shear bolts – needs no special tools.

• Accepts aluminium and copperconductors between 70 and 300mm²

• Designed for IP43 rating andperformance compliance with BS7656: 1993

FuselinksThis fused Cutout is designed to accommodatestandard wedge ‘J’ type fuselinks to BS 88 with82mm fixing centres.

Standard fuselink ratings range from 20 to 400ANote: Fuselink not included

Spare terminal assembly kit

(54614-18)

Compact size (compared with

conventional products)

General Note: The equipment in this publication should be installed by a suitably qualified person. Sicame UK Limited reserves theright to make changes in product specification without notice or liability. All information is subject to Sicame UK’s own data and isconsidered accurate at time this document was created.

© 2014 Sicame UK Limited. All rights reserved. No part of this document may be copied or reproduced in whole or in part without prior writtenapproval of Sicame UK Limited.

14688 2014-02-01

14688 Pole Mounted Cutouts 400A:Layout 1 7/2/14 09:29 Page 2