World top quality and technology ! Japan Qualityeastonicpower.com/product_pdf/eta/ACDC_KM.pdf ·...
Transcript of World top quality and technology ! Japan Qualityeastonicpower.com/product_pdf/eta/ACDC_KM.pdf ·...
AC / DC CONVERTER
ErP COMPLIANCE MEDICAL MODEL WITH LOW POWER CONSUMPTION
COMPACT SIZE, OPEN FRAME MEDICAL MODELCOMPACT SIZE, OPEN FRAME MEDICAL MODEL
KMseries 2015.0818.P
MEDICALMEDICALForMMMMMMMMMMMMMMMMMEEEEEEEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDDDDDDDDIIIIIIIIIIIICCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLMEDICALMMMMMMMMMMMMMMMEE AAAAAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLMEDICALFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFoooooooooooooooooooooooorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrFor
ETA-SEI develops earth-friendly power supplies
Bright future, Bright power
World top quality and technology !
Japan Quality
We are making continuous efforts to meet new demands of customers, and it is our mission as a market-leading innovator of switching power supply.
ETA-SEI always pursue the high efficiency,high cost-performance, compact size.
To be your best partner of power supply
Please note that specification data & mounted parts are subject to change without any prior notice.Contents described in this catalog are applicable from Aug. 2015 onwards.
ISO14001ISO9001
03COMPACT SIZE, OPEN FRAME MEDICAL MODELCOMPACT SIZE, OPEN FRAME MEDICAL MODEL02
115W180W
Air Forced Cooling
would be the best match for medical applicationswould be the best match for medical applications
Convection CoolingAir Forced CoolingDimension(H×W×D)Output VoltageEfficiencyPFC
Convection CoolingAir Forced CoolingDimension(H×W×D)Output VoltageEfficiencyPFC
100W(Peak 115W)115W31.7×50.8×101.6mm12/24/4890%×
120W(Peak 180W)180W35.3×76.2×127mm12/2487%○
KMS120
KMS100
, DESIGN TO MEET MOPP
● Comply with ErP, Low power consumption● Maximum 50% miniaturized● High efficiency up to 90% ▼ KMS100
POWER UP BY FAN COOLING, PEAK POWER MODE WHEN CONVECTION COOLING
KM S ー ー■ Part number coding
■ Safety and Compliance
(IEC61000-3-2)
■ UL(C-UL)60601-1■ PSE complied with□ FCC classB□ VCCI Part15-B classB□ EN55022 classB[KMS120]
Peak Load Conditions
Rated100W120W
▼ KMS120
15UP
%
50UP
%
COMPLIANTED ErP, NO LOAD POWER CONSUMPTION
This series comply with ErP (Energy-related Products for energy saving, improving the environmental performance through eco-design).
ErP COCCOCCOCCOCCOCCO
Then
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEErrrrrrrrrrrrrrrrrrrrrrPPPPPPPPPPPPPPPPPPPPPPEEEEEEEEEEEEEEEEEEEEEEEEEEEErrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPEEEEEEErrrErP
ECOLOGY WNo load power consumption 0.5<
COMPACT SIZE, OPEN FRAME MEDICAL MODEL
15%~50% Power-up by air forced cooling
15%UP!50%UP!
■ CE MARKING
EN60601-1IEC 60601-1:2005 +CoRR.1 (2006) +CoRR.2 (2007)(Medical Device Directive(93/42/EEC))EN50581:2012 (RoHS Directive(2011/65/EU))
■ UL/C-UL
ANSI/AAMI ES60601-1:2005CAN/CSA C22.2 No.60601-1:08
100W 115W
120W 180W
HighEfficiency
SizeDown
MINIATURIZED AND HIGH EFFICIENCY
HighPower
POWPPOOWWPPOOWPPOOWWPPOOWPPOOWW
Rated
15%~1
HighHigPowerPower
gHighPower
SizeDown
MEDICALMEDICALForMMMMMMMMEEEEEEEEEEDDDDDDDDDDDDDDDDDIIIIIICCCCCCCCCCCCCCCCCCCCCCCAAAAAAAAAAAAAAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLMEDICALMMMMMMMEEE AAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLLLMEDICALFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFoooooooooooooooooooooorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrFor
(In case of KMS100)
50%Maximum
Comparing with equivalent models(In case of KMS100)
90typ.%
Maximum
Input at AC230V
The Peak Load can't be above the limit of Rated Peak Load CurrentPeak Load have to be under 10 Sec.The Duty cycle of the Peak Load have to meet the formulate below
1
2
3
25% Miniaturized!
Comparing 100Wequivalent models
Comparing 150Wequivalent models
50% Miniaturized!
S:single outputD:Dual output
Series Name Output Power Output Voltage Option CodesOutput TypeSB:5v Standby output and Remote Control for KMS120V:JST connector type
Ⅱ
T
lo Peak
O [A]
Ton
l
lo2 (lo Peak)2 × (Ton / T)+I2× (1-(Ton / T))>=
10[s]Ton >= lo : Rated output currentlo Peak : Peak currentI : Arbitrary loadT : CycleTon : Time that “lo Peak” flows
05COMPACT SIZE, OPEN FRAME MEDICAL MODELCOMPACT SIZE, OPEN FRAME MEDICAL MODEL04
AC/DC CONVERTER
COMPACT SIZE, OPEN FRAME MEDICAL MODEL COMPACT SIZE, OPEN FRAME MEDICAL MODEL
KMS100
*Specifications subject to be change without notice*Specifications subject to be change without notice*Specifications subject to be change without notice
CN1
CN2
1 2 1
1 4 12 3 2
3 2 3
4 1 4
2 1 3
AC in(L)
AC in(N)
+V
+V
0V
0V
VAR-2
VHR-4N
SVA-41T-P1.1
SVH-21T-P1.1
09-50-1031(5195-03) or09-52-4034(5239-03)
09-50-1041(5195-04) or09-52-4044(5239-04)
5194 or 52252478,2578,
5167 or 5168
5194 or 52252478,2578,
5167 or 5168
Model Name Contents Parts Name
KMS100Wire Harness Set for Input and OutputWire Harness Set for "-V" Option
WH-KMS100WH-KMS100-V
*See the Dimension sheet
for the details
Wire Harness Set
■ OPTIONAL ACCESSORIES
Transformer
SKM 100V:JST connector type
Option Codes
12:12V 24:24V 48:48V
Output VoltageSeries Name Output PowerSingle Output
■ PART NUMBER CODING
Out
put P
ower
(W)
Air Forced Cooling:0.2m3/min (7CFM)
Convection Cooling
Operating Temperature (℃)-20
40
60
80
100
120
100W
100W
115W
70W
-10 0 10 20 30 40 50 60 70
■ TEMPERATURE DE-RATING CURVE■ BLOCK DIAGRAM
■ DIMENSION
<Air Forced Cooling Condition> 0.2 m3/min (7CFM) (Blow to Transformer)
Connector Function-V Type -V Type
JST JST
PIN Number
Loc MOLEX JST MOLEX MOLEX
Proposed Housing Proposed Terminals
128.4A (Air Forced Cooling 9.6A)
120120120
48
10.1-13.2-
24 4.2A (Air Forced Cooling 4.8A)
240240240Non96
5.04-26.4-
482.1A (Air Forced Cooling 2.4A)
480480480
192
2.52-52.8-
KMS100-12 KMS100-24 KMS100-48
[V]
[A]max.
[W]max.
[V] AC Input
[Hz][Hz]
[Φ]
[A]typ.AC115V Input,Ta=25℃[A]typ.AC230V Input,Ta=25℃[%]typ.AC230V Input,Ta=25℃[mA]max. Ta=25℃
Rated Input VoltageRated Input CurrentNo load Power Consumption
Input Voltage Range
Rated Input Frequency
Input Frequency Range
Phase
Inrush Current
Efficiency
Leakage Current
N/AN/A
Non
AC100-2402.50.5
85~ 26450/60
47~ 631
30 (Cold Start)60 (Cold Start)
900.3(AC in 264V,64Hz,Io=100%,Single fault condition)
Automatic Recovery
N/A (N+1 Operation is Applicable by Diode-OR)N/A
-20~+70℃(100% Load till 50℃) See Temperature De-rating Curve
5~ 95%RH (Non-condensation)
-40~ +85℃5~ 95%RH (Non-condensation)
AC4000[V]1minute. Sense Current=20[mA] DC500V 100[mΩ] min.
5~ 10[Hz]10mm, 10~ 55[Hz]19.6[m/s2] (2G) X, Y, Z axis(Non-operating)
196[m/s2] (20G) X, Y, Z axis
Designed to meet FCC Part15-B classB, VCCI classB, EN55022 classB
31.7×50.8×101.6mm(H×W×D) / 190g max.
Convection Cooling or Air Forced Cooling
INPUT SPECIFICATIONS
Rated Output VoltageRated Output Current
Output Voltage Adjustment Range
Ripple and Noisea.Line Regulation
b.Load Regulationc.Temperature Effect
d.Drift
Start-up TimeHold-up Time
Overcurrent Protection
Overvoltage Protection
Remote Sensing(RS)
Remote ON/OFF Control(RC)
Parallel Operation
Series Operation
Operating Indicator
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Isolation Resistance
Vibration
Shock Test
Safety Standards
Conducted Emissions
DIMENSION AND WEIGHTDimensions / Weight
Cooling
[V]
[A]
[V]
0~ +50℃[mVp-p]max.[mV]max.
[mV]max.
[mV]max.
[ms]typ. Ta=25℃[ms]min. Io=100%
[A]
[V]
Primary - Secondary
Without DC Input
50012
N/A
Output Ratings / Characteristics
Input Ratings / Characteristics
VoltageRegulation
Protections and Functions
Environment and Isolation
Safety Standards / EMC
Specifications Parts Number
Mechanical
Single Output (KMS100)
INPUT
L OUTPUT
AC250VT3.15A
N
FUSE
FUSE
AC250VT3.15A
SubP.S&Smooth
NoiseFilter
InrushCurrentLimiter
Rectifying RectifyingSwitching
Control Control
Smoothing
OCP
OVP
3.4
CN2
1
4.3
2.5
50 m
ax.
50.8
44.4
8
43.1
9
CN1
1
93.94
95.26
101.62
34.2
・ANSI/AAMI ES60601-1:2005 ・CAN/CSA C22.2 No.60601-1:08 ・CE In conformance with EN60601-1, IEC 60601-1:2005 +CoRR.1 (2006) +CoRR.2 (2007) (Medical Device Directive (93/42/EEC)) EN50581:2012 (RoHS Directive(2011/65/EU))・INSULATION CLASSⅡ
07COMPACT SIZE, OPEN FRAME MEDICAL MODELCOMPACT SIZE, OPEN FRAME MEDICAL MODEL06
AC/DC CONVERTER
COMPACT SIZE, OPEN FRAME MEDICAL MODEL COMPACT SIZE, OPEN FRAME MEDICAL MODEL
KMS120
*Specifications subject to be change without notice*Specifications subject to be change without notice*Specifications subject to be change without notice
CN1
CN2
CN3
1 3
1 62 53 44 3
2 1AC in(L)AC in(N)
+V+V+V0V
VAR-2(JST)
VHR-6N(JST)
XHP-3(JST)
SVA-41T-P1.1(JST)
SVH-21T-P1.1(JST)
1 32 23 1
+5V STB+OVRC
SXH-001T-P0.6(JST)
5 26 1
0V0V
-20
180
150
120
90
60
30
0
150W
120W
180W
72W
-10 0 10 20 30 40 50 60 70
CN1
CN2
CN3
1
1234
2AC in(L)AC in(N)
+V+V+V0V
09-50-1031(5195-03) or09-52-4034(5239-03)
09-50-1041(5195-04) or09-52-4044(5239-04)
22-01-1032(5251-03) or51191-0300
5194 or 52252478,2578,5167 or 5168
5194 or 52252478,2578,
5167 or 5168
123
+5V STBOVRC
2759 or 515950802
56
0V0V
■ DIMENSION
Single Output (KMS120)
1210A (Air Forced Cooling 12.5A)
120120120
48
17.5-13.8-
24 5A (Air Forced Cooling 6.25A)
320240240
96
8.82-27.6-
KMS120-12 KMS120-24
[Standard model, -V option model]
CN1
76.2 64.8
5.5
1
50 max.
CN2
CN3
1
115.6
127
5.7
1
4-Ø3.5
T2
37.8
2.5
Q1
C7
[V][A]max.[W]max.[V] AC Input[Hz][Hz][Φ][A]typ.AC115V Input,Ta=25℃[A]typ.AC230V Input,Ta=25℃[%]typ.AC230V Input,Ta=25℃[mA]max. Ta=25℃Typ.AC115V Input Io=100%
Input Frequency Range
N/A
Non
AC100-2402.50.5
85~ 26450/60
47~ 631
50 (Cold Start)100 (Cold Start)
870.3(AC in 264V,64Hz,Io=100%,Single fault condition)
0.9
Automatic Recovery
N/A (N+1 Operation is Applicable by Diode-OR)
N/A
Standby Power +5V/0.1ARemote Control (ON when 3rd PIN of CN3 and 4th or 5th or 6th PIN of CN2 is Short)
-20~+70%(100% Load till 50℃) See Temperature De-rating Curve5~ 95%RH (Non-condensation)
-40~ +85℃5~ 95%RH (Non-condensation)
AC4000[V]1minute. Sense Current=20[mA] DC500V 100[mΩ] min.5~ 10[Hz]10mm, 10~ 55[Hz]19.6[m/s2] (2G) X, Y, Z axis(Non-operating)
196[m/s2] (20G) X, Y, Z axis
Designed to meet FCC Part15-B classB, VCCI classB, EN55022 classB
35.3×76.2×127mm(H×W×D) / 190g max.Convection Cooling or Air Forced Cooling
a.Line Regulationb.Load Regulation
d.Drift
Hold-up Time
Options
+5V Standby Power,Remote Control
[V][A][V] 0~ +50℃[mVp-p]max.[mV]max.[mV]max.
[mV]typ.
[ms]max. AC100V Input Io=100%,Ta=25℃[ms]min. Over AC 100V Input
[A][V]
*Option Model with "-SB"
Primary - Secondary
Without DC Input
400025
N/A
Non
(IEC61000-3-2)
SKM 120Option Codes
12:12V 48:48V
Output VoltageSeries Name Output PowerSingle Output
■ PART NUMBER CODING
SB:5v Standby output and Remote ControlV:JST connector type
KMS120
WH-KMS120WH-KMS120-VWH-KMS120-OPWH-KMS120-VOP
*See the Dimension sheet
for the details
Wire Harness Set Model Name Contents Parts NameWire Harness Set for Input and OutputWire Harness Set for "-V" OptionWire Harness Set for "-SB" OptionWire Harness Set for "-VSB" Option
■ OPTIONAL ACCESSORIES
Out
put P
ower
(W)
Operating Temperature (℃)
■ TEMPERATURE DE-RATING CURVE■ BLOCK DIAGRAM
<Air Forced Cooling Condition> 0.33 m3/min (11.7CFM) (Blow to PFC choke coil T2)
Air Forced Cooling:0.33m3/min (11.7CFM)
Convection Cooling
Connector FunctionPIN Number
Loc JST
-V option model
Standard model
Connector FunctionPIN Number MOLEX MOLEXProposed Housing Proposed Terminals
Proposed Housing Proposed Terminals
INPUT
OUTPUT
AC250VT3.15A
FUSE
AC250VT3.15A
FUSE
L
NActiveFilter
SubP.S&Smooth
NoiseFilter
InrushCurrentLimiter
Rectifying
Control Control Control
Switching
OCP
OVP
RectifyingSmoothing
Specifications Parts Number
Input Ratings / CharacteristicsRated Input VoltageRated Input CurrentNo load Power Consumption
Input Voltage RangeRated Input Frequency
Phase
Inrush Current
EfficiencyLeakage CurrentPower FactorOutput Ratings / Characteristics
Rated Output VoltageRated Output CurrentOutput Voltage Adjustment RangeRipple and Noise
c.Temperature Effect
Start-up Time
Protections and Functions
Overcurrent Protection
Overvoltage ProtectionRemote Sensing(RS)Parallel Operation
Series OperationOperating Indicator
Operating Temperature
Operating HumidityStorage TemperatureStorage HumidityIsolation ResistanceVibrationShock Test
Environment and Isolation
Safety Standards
Conducted Emissions
Dimensions / WeightCooling
Safety Standards / EMC
Mechanical
・ANSI/AAMI ES60601-1:2005・CAN/CSA C22.2 No.60601-1:08・CE In conformance with EN60601-1, IEC 60601-1:2005 +CoRR.1 (2006) +CoRR.2 (2007) (Medical Device Directive (93/42/EEC)) EN50581:2012 (RoHS Directive(2011/65/EU))・INSULATION CLASSⅡ
VoltageRegulation