WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL...
Transcript of WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL...
WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL PROCESSING & FINISHING MACHINES. MADE IN INDIA.
Copyright © All rights reserved.
Indeed, in this interface of vision & reality , the idea is born. For Stefab,
it all began in the year 1975. A desire to simply do what no other Indian
company had done before: “Make user-friendly, cost-effective, industrial
Laundry, Drycleaning, Apparel Processing & Steam Finishing machines.
At par with world standards, right here, in India.” Where did this take us ?
Today, 18000 square meters of ‘state-of-the-art’ manufacturing facilities,
Computer aided designs and 400 qualified & experienced workforce
attribute to the high standards of Stefab machines used worldwide. With
over 7000 major installations & many more projects later, Stefab quality
& expertise continue to remain unqualified. Facts, that have translated
into Stefab becoming the largest & most preferred manufacturer of India.
“ uality is as much in the actual product, as in the mind.”Q
Deepak Arora Founder & Managing Director
ISO 9001-2008 CERTIFIED
JAS-ANZ
®
NORWEGIANACCREDITATION
MSYS 013PCMS
F ER
C
E
T
P
I O
N
CO
M M
T
I T
N
M E
• •
M3111204IN C E R T I F I E D
Inverter Drive.
Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low & normalspin. The energy efficient drive consumes less energy & reduces electric peak load demands.
Washer Extractors. High Spin. Soft Mount.
Micro Computer.
Fully programable computer captures all the features for any customized process. The preset programs can be easily modified or erased. Step by step LCD display provides cycle advance, variable time signal & diagnostic checks. Easy to operate.
Front Loading. Stainless Steel Cabinet. Computer Controlled.15, 30, 60 & 120 kg. Capacity.
Bearing Housing.
The housing has wide roller bearings to have large contact area to disperse dynamic forces. Packed with lubricants & sealed. The self lubricating twin water seals & bearing seal are air separated. Prevents contact of water with the bearings.
2700for
AXS1 20T
W
H
ELECTRICCONNECTION
AIR VENT WATERCONNECTION
STEAM CONNECTION
DRAIN
D
DRAIN for AXS 120T
2nd
5 Compartment Dispenser.
Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely flush out the chemicals as and when signaled by the computer. Optional : Liquid chemical supply connections for automatic Dozing Pumps.
Self Unloading.
Hydraulic forward tilt on 120kg machine drops the entire load into a trolley in less than 30 seconds. One operator can handle upto4 machines. No pulling or tearing of linen. Huge savings on time & labor.
Model AXS-Steam Heated • AXE-Electric Heated • T-Forward Tilt
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES. HIGHER ‘G FORCE’ ON REQUEST.
MODEL
AXS 30AXE 30
AXS 60AXE 60
AXS 120TForward
Tilt
30 Kg
60 Kg
120 Kg
Ø 900 x 500
318 Ltrs
CYLINDER SIZE
Ø 1100 x 650
617 Ltrs
Ø 1350 x 850
1216 Ltrs
3.75 KW
DRIVEMOTOR
7.5 KW
15 KW
1.5 KW
CYLINDER SPEEDS
WASH FINAL EXTRACT
40 to 50RPM
35 to 45RPM
30 to 35RPM
Ø 500
Ø 650
Ø 800
LOADINGDOOR
OPENING
WATERCONNECTION
CONSUMPTION
Ø25 (1” BSP)
400 Ltrs / cycle
Ø38 (1.5” BSP)
800 Ltrs / cycle
Ø50 (2” BSP)
1600 Ltrs / cycle
Ø 65
Ø 65
Ø 652Nos
DRAIN
HEATING
STEAM CONN.
STEAM CONSUMP. LOAD
AXS 30Ø15 (0.5” BSP)
30 Kg / hr
AXS 60Ø15 (0.5” BSP)
60 Kg / hr
AXS 120TØ25 (1” BSP)
120 Kg / hr
AXE 3012-18 KW
AXE 6024-36 KW
-
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
1380 Kg / 1560 Kg1600 x 1700 x 2025
5.5 M³
2380 Kg / 2670 Kg1900 x 2000 x 2350
4250 Kg / 4670 Kg2250 x 2350 x 2600
13.74 M³
AXS 15AXE 15
15 Kg
Ø 720 x 380
154 Ltrs
1.5 KW 45 to 55RPM
Ø 400Ø20 (0.75” BSP)
200 Ltrs / cycleØ 65
AXS 15Ø15 (0.5” BSP)
15 Kg / hr
AXE1512 KW
790 Kg / 880 Kg1350 x 1360 x 1800
3.3 M³
1050 x 1060 x 1500
1300 x 1400 x 1725
1950 x 2050 x 2300
1600 x 1700 x 2025
VOLUMEELECTRIC
Tilt Motor
dry weight per charge (1:10)
CAPACITY
8.93 M³
G FORCE
780 to 840 RPM
700 to 760 RPM
635 to 685 RPM
870 to 940 RPM
304 to 353 G
301 to 355 G
305 to 354 G
304 to 355 G
‘AX’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Inner Cylinder
DOORS
Outer Drum
1 No. Open Pkt
2 Nos.
1 No. Open Pkt2 Nos.
2 Nos. ‘D ' Shape2 Nos.
Model BXS-Steam Heated • BXE-Electric Heated
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES. HIGHER ‘G FORCE’ ON REQUEST.
MODEL
BXS 30BXE 30
BXS 60BXE 60
BXS 120
30 Kg
60 Kg
120 Kg
Ø 750 x 730
322 Ltrs
CYLINDER SIZE
Ø 950 x 900
637 Ltrs
Ø 1200 x 1100
1243 Ltrs
3.75 KW
DRIVEMOTOR
7.5 KW
15 KW
CYLINDER SPEEDS
WASH FINAL EXTRACT
40 to 50RPM
35 to 45RPM
30 to 35RPM
WATERCONNECTION
CONSUMPTION
Ø25 (1” BSP)
400 Ltrs / cycle
Ø38 (1.5” BSP)
800 Ltrs / cycle
Ø50 (2” BSP)
1600 Ltrs / cycle
Ø 65(2.5” BSP)
Ø 65(2.5” BSP)
Ø 65 - 2Nos(2.5” BSP Each)
DRAIN
HEATING
STEAM CONN.
STEAM CONSUMP. LOAD
BXS 30Ø15 (0.5” BSP)
30 Kg / hr
BXS 60Ø15 (0.5” BSP)
60 Kg / hr
BXS 120Ø25 (1” BSP)
120 Kg / hr
BXE 3012-18 KW
BXE 6024-36 KW
-
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
1310 Kg / 1430 Kg1900 x 1500 x 1950
5.55 M³
2280 Kg / 2460 Kg2400 x 1750 x 2300
4100 Kg / 4320 Kg2900 x 2050 x 2600
15.45 M³
1600 x 1200 x 1650
2600 x 1750 x 2300
2100 x 1450 x 2000
VOLUMEELECTRIC
dry weight per charge (1:10)
CAPACITY
9.66 M³
G FORCE
820 to 890 RPM
740 to 800 RPM
670 to 730 RPM
300 to 357 G
305 to 357 G
300 to 354 G
Clean Linen Area
Clean / Sterlized Linen out
D
Infected &Contaminated Linen Area
Glazed Partition
Contaminated Linen in
H
W
STOP
LINEN
INFECTION
Inverter Drive
Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low, normal & high spin. The energy efficient drive consumes less energy & reduces electric peak load demands.
Infection Barrier Washer Extractors.
Micro Computer
Fully programable computer captures all the features for any customized process. The preset programs can be easily modified or erased. Step by step LCD display provides cycle advance, variable time signal & diagnostic checks. Easy to operate.
High Spin. Soft Mount. Stainless Steel Cabinet. Computer Controlled.30, 60 & 120 kg. Capacity.
Tuned Suspension
Dynamically tuned topsuspension with HydraulicCushions absorb even severeout-of-balance load vibrationsand remains silent. No specialfoundations required & themachine can be installedon any floor that can hold itsdead weight.
Powerful Brake
Electro-Pneumatic / Electro Magnetic Powerful Brake applies automatically as the machine stops. Activates instantly at the time of alignment of inner cylinder door with the outer drum door. Self adjusting brake liners. Easily adjustable brake pressure.Fail safe.
‘BX’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
5 Compartment Dispenser
Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely
flush out the chemicals as and when signaled by the computer. Optional : Liquid chemical supply connections for automatic Dozing Pumps.
STEAM CONNECTION
WATER CONNECTION
“Non Clog Full Clear Port” motorized drain valve flushes all the lint during drain. Easily accessible electric motor is splash proof. Manual lever to activate drain in case of motor failure. Fail safe, rust free operation through out Its life.
AIR VENT
Efficient, Inverter Drive.
Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low & normalspin. The energy efficient drive consumes less energy & reduces electric peak load demands.
Motorized Drain Valve.
ELECTRIC CONNECTION
Washer Extractors. Normal Spin. Hard Mount.
DRAINCONNECTION
5 Compartment Dispenser.
Easy to use Computer.
Fully programable computer captures all the features for any customized process. The preset programs can be easily modified or erased. Step by step LCD display provides cycle advance, variable time signal & diagnostic checks. Easy to operate.
Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely flush out the chemicals as and whensignaled by the computer. Optional : Liquid supply connections for automaticDozing Pumps.
Front Loading. Stainless Steel Cabinet. Computer Controlled.15, 23 & 30 kg. Capacity.
D
H
W
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
RIGID MOUNT MACHINES ARE RECOMMENDED FOR INSTALLATIONS ON GROUND / BASEMENT FLOOR & ON BOARD SHIPS. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
Model NXS-Steam Heated • NXE-Electric Heated
MODEL
Ø 720 x 570
232 Ltrs
CYLINDER SIZE
Ø 900 x500
318 Ltrs
2.2 KW
DRIVEMOTOR
3.75 KW
CYLINDER SPEEDS
WASH FINAL EXTRACT
45 to 55RPM
40 to 50RPM
500 RPM
450 RPM
Ø 400
Ø 500
LOADINGDOOR
OPENING
WATERCONNECTION
CONSUMPTION
Ø20 (0.75” BSP)
300 Ltrs / cycle
Ø25 (1” BSP)
400 Ltrs / cycle
Ø 65
Ø 65
DRAIN
HEATING
STEAM CONN.
STEAM CONSUMP. LOAD
NXS 23Ø15 (0.5” BSP)
23 Kg / hr
NXS 30Ø15 (0.5” BSP)
30 Kg / hr
NXE 2312 KW
NXE 3012-18 KW
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
Ø 720 x 380
154 Ltrs1.5 KW 45 to 55
RPM500 RPM Ø 400
Ø20 (0.75” BSP)
200 Ltrs / cycle Ø 65
NXS 15Ø15 (0.5” BSP)
15 Kg / hr
NXE1512 KW
870 x 1000 x 1480
870 x 1200 x 1480
1050 x 1200 x 1630
VOLUMEELECTRIC
NXS 15NXE 15
NXS 23NXE 23
NXS 30NXE 30
23 Kg
15 Kg
30 Kg
690 Kg / 820 Kg1170 x 1500 x 1780
810 Kg / 930 Kg1350 x 1500 x 1930
610 Kg / 715 Kg1170 x 1300 x 1780
3.9 M³
3.12 M³
2.70 M³
‘NX’ Range
dry weight per charge (1:10)
CAPACITY
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
`
Front Loading Washing Machines with Low Spin Extract.
STEAM CONNECTION
WATER CONNECTIONAIR VENT
DRAINCONNECTION
ELECTRICCONNECTION
DW
H
Front, inner cylinder, loading door, outer drum & chemical dispenser all in S.S. Electrically interlocked door stops the machine when opened. Hot painted structure frame. Front & back service. Requires little space on sides. Long Rust Free Life.
Electrical Control Panel. Low Spin Extract.
All Stainless Steel.
Motorized Drain Valve
Automatic Time, Temperature & Level Control.30, 60 & 120 kg. Capacity.
“Non Clog Full Clear Port” motorized drain valve flushes all the lint during drain. Easily accessible electric motor is splash proof. Manual lever to activate drain in case of motor failure. Fail safe, rust free operation through out Its life.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model LXS-Steam Heated • LXE-Electric Heated
MODEL
Ø 1100 x 650
617 Ltrs
CYLINDER SIZE
Ø 1350 x850
1216 Ltrs
WASH MOTORCYLINDER SPEEDS
WASH EXTRACT
33RPM
26RPM
200 RPM
160 RPM
Ø 650
Ø 800
LOADINGDOOR
OPENING
WATERCONNECTION
CONSUMPTION
Ø38 (1.5” BSP)
800 Ltrs / cycle
Ø50 (2” BSP)
1600 Ltrs / cycle
Ø 65
Ø 652 Nos.
DRAIN
HEATING
STEAM CONN.
STEAM CONSUMP. LOAD
LXS 60Ø15 (0.5” BSP)
60 Kg / cycle
LXS 120Ø25 (1” BSP)
120 Kg / cycle
LXE 6018-24 KW
-
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
Ø 900 x 500
318 Ltrs2.2 KW
33RPM
200RPM
Ø 500Ø25 (1” BSP)
400 Ltrs / cycleØ 65
LXS 30Ø15 (0.5” BSP)
30 Kg / cycle
LXE3012-18 KW
1050 x 1200 x 1600
1300 x 1450 x 1800
1550 x 1900 x 2000
VOLUMEELECTRIC
LXS 30LXE 30
LXS 60LXE 60
LXS 120
60 Kg
30 Kg
120 Kg
910 Kg / 1060 Kg1600 x 1750 x 2100
1460 Kg / 1710 Kg1850 x 2200 x 2300
750 Kg / 870 Kg1350 x 1500 x 1900
9.36 M³
5.88 M³
3.84 M³
EXTRACT MOTOR
0.75 KW
3.75 KW
2.2 KW
7.5 KW
3.75 KW
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
‘LX’ Range
dry weight per charge (1:10)
CAPACITY
Mounted on top front. Individual controls for automatic time of wash, rinse & low spin extract. Auto reverse. Automatic digital temperature control. Automatic 3 water level control. Solenoid operated of water & steam valves. Intermediate Low Spin Extract flushes out soap. Final Extract makes articles lighter to unload. Reduced number of rinses. Saves water, time & labor.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Side Loading Washing Machines. Full Stainless Steel Body. Automatic Time & Temperature Control. 15, 30, 60, 120 & 240 kg. Capacity.
Idler / Gear Box Positive Drive.Multi V belts driven on multi groove idler pulleys or through an electric motor coupled with Reduction Gear Box unit provide positive drive to the
Side plates, outer drum, inner cylinder, doors, chemical dispenser, front, sides, top & back covers all in S.S. Side hinged door
Electrical Control Panel.All Stainless Steel.
with inner cylinder. Electrically interlocked sliding door with outer drum stops the machine when opened. Long rust free life. Operator’s safety.
Model WMS-Steam Heated • WME-Electric Heated.
W
H
DW
H
WATER CONNECTION
STEAM CONNECTION
WMS 240WATER CONNECTION
STEAM CONNECTION ELECTRICCONNECTION
DRAINCONNECTION
Individual push button timed controls for wash & rinse. Auto reverse. Digital temperature control. Solenoid operated steam valve. Easy to operate..
main drive pulley of the inner cylinder. Simple V- belts tensioning device. Silent drive. No cylinder speed loss.
1220 Kg / 1410 Kg2800 x 1580 x 1620
2280 Kg / 2580 Kg4620 x 1960 x 1620
WMS 60WME 60
14.66 M³
7.16 M³
930 Kg / 1080 Kg2220 x 1380 x 1490
4.56 M³
WMS 30WME 30
Ø 700 x 830
319 Ltrs0.75 KW
2.2 KW
3.75 KW
7.5 KW
MODEL SIZE VOLUME
WASHMOTOR
NET WT / CRATED WT CRATED SIZE WxDxH
CRATED VOLUME
WMS 120
WMS 240
LOADINGDOORSIZE
WATER
CONNECTION
CONSUMPTION
DRAIN STEAM CONN.
STEAM CONSUMP.ELECTRIC
HEATINGDIMENSIONS
W x D x H
550 x 350
650 x 400
800 x 450
800 x 4502 Nos
Ø25 (1” BSP)
500 Ltrs / cycle
Ø38 (1.5” BSP)
1000 Ltrs / cycle
Ø50 (2” BSP)
2000 Ltrs / cycle
Ø75 (3” BSP)
4000 Ltrs / cylce
Ø 65(2.5” BSP)
Ø 75(3” BSP)
Ø 100(4” BSP)
Ø 150(6” BSP)
WMS 30 15 (0.5” BSP)
40 Kg / hr
WMS 60
15 (0.5” BSP)
80 Kg / hr
WMS 24025 (1” BSP)300 Kg / hr
WME 3018 KW
WME 6024 KW
-
1550 x 880 x1090
1920 x 1080 x1190
2500 x 1280 x1320
4320 x 1660 x1320
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
WMS 15WME 15
15 Kg
Ø 550 x 650
154 Ltrs0.37 KW 400 x 300
Ø20 (0.75” BSP)
250 Ltrs / cycle
30 Kg
60 Kg
Ø 50(2” BSP)
WMS 15 15 (0.5” BSP)
20 Kg / hr
WME 1512 KW
1050 x 720 x950
120 Kg
240 Kg
570 Kg / 690 Kg1850 x 1180 x 1390
3.03 M³
360 Kg / 450 Kg1350 x 1020 x 1250
1.72 M³
-
WASHSPEED
45 RPM
40 RPM
37 RPM
32 RPM
32 RPM
Ø 900 x 970
616 Ltrs
Ø 1100 x 1300
1234 Ltrs
Ø 1100 x 2600
2468 Ltrs
CYLINDER
Ø
Ø
Ø
Ø
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
25 (1” BSP) ØWMS 120
150 Kg / hr
‘WM’ Range
dry weight per charge (1:10)
CAPACITY
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Hydro Extractors. Direct Drive. Self Balancing.Stainless Steel Body. Automatic DC Injection Brake.15, 30 & 60 kg. Capacity.
Inner cylinder can be dismantled without dismantling outer drum. Electrically interlockedtop Lid stops the machine when opened. Three position drain
DC ( Direct current - Low voltage ) brake applies automatically after timed run of the machine. Running and braking time are digitally controlled.
Stainless Steel Cylinder & Outer Drum.
Cylinder is directly mounted on to a specially designed high torque heavy duty motor resting on spigot of the base frame with built-in Rubber Buffer cushion
Direct Drive, Self Balancing. Automatic DC injection Brake.
W
DRAINCONNECTION
ELECTRICCONNECTION
H
REAR DRAIN
D
DRAINCONNECTION
connection with outer drum. Outer casing mounted on galvanized & hot painted heavy base frame. Long rust free life & strength.
No foot pedals. No levers. No brake liners. No maintenance. Convenience & safety for the operator.
for self balancing. No ‘V’ Belts. No speed loss. Quick self balancing. Noiseless & vibration less performance.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
370 Kg / 470 Kg1240 x 1440 x 1400
880 Kg / 1030 Kg1550 x 1850 x 1450
HX 30
4.15 M³
2.49 M³
270 Kg / 350 Kg1100 x 1300 x 1350
1.93 M³HX 15
MODELNET WT / CRATED WT CRATED SIZE: WxDxH
CRATED VOLUME
HX 60
DIMENSIONSW x D x H
CYLINDER
SIZE
VOLUME
CYLINDERSPEED
MOTOR DRAIN
15 Kg
30 Kg
60 Kg
550 x 30071 Ltrs
Ø
700 x 300115 Ltrs
Ø
1000 x 300235 Ltrs
Ø
1000RPM
1000RPM
750RPM
2.2 KW
3.75 KW
7.5 KW
Ø 65 (2.5” BSP)
Ø 65 (2.5” BSP)
Ø 75 (3” BSP)
800 x 1000 x 1050
940 x 1140 x 1100
1250 x 1550 x 1150
CAPACITYDry weight per charge
‘HX’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Drying Tumblers.
Stainless Steel Cylinder. Microprocessor Control. Reversible.15, 30, 60, 120 & 200 kg. Capacity.
Not RequiredFor MultipleInstallation
ELECTRICCONNECTION
STEAMCONNECTION
EXHAUSTDUCT
W D
H
NET WT / CRATED WTCRATED SIZE (WxDxH)
CRATED VOLUMEMODEL
15 Kg
410 Kg / 490 Kg
1200 x 1500 x 2080
3.74 M³
DRE 15
9 / 13.5 KW
STEAM CONNECTION
CONSUMPTION
THERMIC FLUIDCONNECTION
CONSUMPTION
HEATING
W x D x H
0.37 KW
0.37 KW
DRD 60
900 x 1200
x 1780
CYLINDERSIZE
VOLUME
LOADINGDOOR
OPENING
EXHAUSTDUCTSIZE
ELECTRICLOAD
DIESELCONN.
CONSUMP.
DIMENSIONS
Ø 800 x 600
Ø 1280 x 950
Ø 1600 x 1200
Ø 500
Ø 800
Ø 1000
1.5 KW
1.5 KW
2.25 KW
180 x 180
300 x 300
2 Nos
DRS 15Ø15 (0.5” BSP)
15 Kg / hr
DRS 60Ø15 (0.5” BSP)
60 Kg / hr
DRS 120Ø25 (1” BSP)
120 Kg / hr
1380 x 1700
x 2340
1760 x 2100
x 2900
920 Kg / 1090 Kg
1680 x 2000 x 2640
8.87 M³
1720 Kg / 1950 Kg
2060 x 2400 x 3200
15.8 M³
DRIVEMOTOR
BLOWERMOTOR
120 Kg
301 Ltrs
1221 Ltrs
2411 Ltrs1.5 KW 2 Nos
DRS 120 - DRT 120
DRD 120 - DRG 120
DRS 200T - DRT 200TDRD 200T - DRG 200T
30 Kg
60 Kg
200 Kg
Ø 950 x 850
602 Ltrs
Ø 1800 x 1600
4069 Ltrs
0.75 KW
0.75 KW
3.75 KW
2.2 KW
Ø 650
Ø 1200
DRS 30Ø15 (0.5” BSP)
30 Kg / hr
DRS 200Ø25 (1” BSP)
200 Kg / hr
DRT 30
DRT 200
1050 x 1500
x 1980
1970 x 2600
x 3250
570 Kg / 690 Kg
1350 x 1800 x 2280
5.54 M³
2680 Kg / 3030 Kg
2270 x 2900 x 3550
23.36 M³
GAS CONN.
CONSUMP.
DRT 60
DRT 120
DRE 60
36 / 48 KW
DRD 30
DRD 120
DRE 30
18 / 24 KW
DRG15/DRL15
EXHAUSTDUCT for120 & 200 kgModels
2 Nos
210 x 210
300 x 300
400 x 280
2 Nos
Forward Tilt Models
3500for
ForwardTilt Models
Model DS-Steam Heated • DE-Electric Heated • DT-Thermic Fluid Heated • DD-Diesel Radiator Heated • DG-Gas Radiator Heated • DL-Live Gas Heated
2nd
Steam/Thermic Fluid Radiator.
Steam Radiator is of copper coils & aluminumfins. Thermic Fluid Radiator is of steel coils & aluminum fins.Maximum thermalconductivity.
Live Gas Radiator.
Enclosed box type construction. Full length burner tube.Regulated gas & fire flame Interlocked with fresh air intake.Safe & efficient.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
DRS 15 - - -
DRE 15
DRG 15DRL 15DRT 15
DRD 15
Dry weightper charge
(1:20)
CAPACITY
Ø6 (0.25” BSP)1.8 Ltrs / hr
Ø6 (0.25” BSP)2.5 Ltrs / hr
Ø15 (0.5”BSP)7.5 Ltrs / hr
Ø15 (0.5”BSP)11 Ltrs / hr
DRT 15
Ø6 (0.25” BSP)1 Kg / hr
Ø6 (0.25” BSP)2 Kg / hr
DRG 30/DRL 30
DRG 60/DRL 60
DRG 120Ø15 (0.5”BSP)
8 Kg / hr
DRG 200Ø15 (0.5”BSP)
12 Kg / hr
8000 KCal / hr
32000 KCal / hr
64000 KCal / hr
110000 KCal / hr
Ø15 (0.5”BSP)4 Kg / hr
Ø15 (0.5”BSP)4 Ltrs / hr
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
16000 KCal / hr
DRD 200
DRD 15Ø15 (0.5” BSP)
Ø15 (0.5” BSP)
Ø20 (0.75” BSP)
Ø25 (1” BSP)
Ø25 (1” BSP)
Micro ComputerControl.
Self CleaningLint Screen.
For automatic drying & cool-down time with digital temperature control. Step by step LCD display shows cycle status.Easy to use.
The wire mesh screen drops the lint by itself at the bottom at the end of each cycle. Cleaning not required after every operation.
Diesel/Gas Radiator.
Main Chamber & Return Flue Gas pipes in thick steel tubes. Fitted with Diesel or Gas burner.Maximum heatutilization.
Self Unloadingon 200kg Machine.
Forward tilt drops the load into a trolley within 30 sec. Savings on time & labor.
200 KG FORWARD TILT MACHINE REQUIRES AN AIR CONNECTION OF ø12 WITH CONSUMPTION OF 80 LTRS / MINUTE.
DRS 30 - - -
DRE 30
DRG 30DRL 30DRT 30
DRD 30
DRS 60 - - -
DRE 60
DRG 60DRL 60DRT 60
DRD 60
‘DR’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Flatwork Drying Ironer. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )
Fabricated in steel. Precision machined with drilled perforations. Zinc electroplated. Runs on self aligning ball bearings with moisture exhaust. Padded with galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.
Roller & Padding.
.
Inverter Drive.
Single motor working in conjunction with variable frequency drive (VFD) provides precision & variable speeds for roller. Digital temperature control. Rocker switch for automatic chest movement. Auto cut for false feeding and finger safety guard. Operator’s safety & convenience.
Precision machined,ground smooth & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as ironing of flat linen.
Gear Box & Chain Drive.
Roller is driven by an electric motor coupledwith a reduction gear box unit which is lubricant packed & sealed. The final transmission is through sprockets & chain. Easy chain tensioning device. Silent & maintenance free. No slippage or cylinder speed loss.
W
H
ELECTRICCONNECTION
D
MOIST AIREXHAUST
Front Feed - Front Return. Can be Installed against a wall.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
THE ABOVE MODEL SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. ELECTRIC LOAD IS FOR THE PURPOSE OF DESIGNING UTILITY.
NET WT / CRATED WT) CRATED SIZE (WxDxH)
CRATED VOLUMEMODEL
0.2 KW280 Kg / 360 Kg2300 x 700 x 1230
1.98 M³
ROLLERDIA
(Padded)
ROLLER
LENGTH
ROLLER
SPEED
DRIVE
MOTOR
SUCTION
MOTOR
ELECTRIC
HEATINGDIMENSIONS
W x D x H
250 1500
1 to 4
Mtrs / Min
(Variable)0.37 KW 2100 x 500
x 1030FRE 25-150 4.5 / 9 KW
‘FR’ Range. Roller Size: Ø250 x 1500L
Ironing Chest.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Flatwork Drying Ironers. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )
W
H
STEAM / THERMIC FLUID CONNECTION
Front Feed-Front Return. Can be installed against a wall.
D
ELECTRICCONNECTION
MOIST AIREXHAUST
STEAM CONDENSATE
.
Variable Frequency Drive.
Single Motor with VFD provides precision speeds for roller. All digital controls.Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.
Roller is precision machined with drilled perforations. Axial moisture exhaust. Gear driven. Padded with galvanized springs & polyester padding. Long roller & padding life.
Roller &Padding.
Precision machined & polished. Slides on pneumatic cylinders. Adjustable & uniformironing pressure across the entire roll. Finest drying & Ironing.
Ironing Chest.
Conveyor Feed Belts.
Polyester belts with welded seams are joined with detachable S.S. Combs. The feed roller is chain driven. Quick belt tensioning with easy replacement. No slippage or speed loss.
Roller is driven through a reduction gear box unit coupled with an electric motor. Simultaneous drive transmission to the conveyor feed belts. Silent drive. No speed loss.
‘FR’ Range. Roller Size: Ø380 x 2000L
Gear Box &Chain Drive.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model FRS-Steam Heated • FRE-Electric Heated • FRT-Thermic Fluid Heated
ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
Ø
NET WT / CRATED WT
CRATED SIZE (WxDxH)
CRATED VOLUME
MODEL
0.37 KW1100 Kg / 1300 Kg3250 x 1100 x 1530
5.46 M³
ROLLERDIA
(Padded)
ROLLER
LENGTH
ROLLER
SPEED
DRIVE
MOTOR
SUCTION
MOTORSTEAM
CONNECTIONCONSUMPTION
THERMIC FLUIDCONNECTION
CONSUMPTION
HEATINGAIR CONNECTION
AIR CONSUMPTIONDIMENSIONS
W x D x H
380 2000
2 to 6
Mtrs / Min
(Variable)
0.75 KW 20 (0.75”BSP) 15 Ø (0.5”BSP)
2950 x 800
x 1230
FRS 38-200
FRE 38-200
FRT 38-200
FRS 38-200 FRT 38-200
ELECTRIC
15 Ø (0.5”BSP)12 / 18 KW
Ø50 Ltrs / hr
FRE 38-200
50 Kg / hr 27000 KCal / hr
Flatwork Drying Ironers. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )
W
H
STEAM / THERMIC FLUID CONNECTION
Front Feed-Front Return. Can be installed against a wall.
D
ELECTRICCONNECTION
MOIST AIREXHAUST
STEAM CONDENSATE
.
Variable Frequency Drive.
Single Motor with VFD provides precision speeds for roller. All digital controls.Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.
Roller is precision machined with drilled perforations. Axial moisture exhaust. Gear driven. Padded with galvanized springs & polyester padding. Long roller & padding life.
Roller &Padding.
Precision machined & polished. Slides on pneumatic cylinders. Adjustable & uniformironing pressure across the entire roll. Finest drying & Ironing.
Ironing Chest.
Conveyor Feed Belts.
Polyester belts with welded seams are joined with detachable S.S. Combs. The feed roller is chain driven. Quick belt tensioning with easy replacement. No slippage or speed loss.
Roller is driven through a reduction gear box unit coupled with an electric motor. Simultaneous drive transmission to the conveyor feed belts. Silent drive. No speed loss.
‘FR’ Range. Roller Size: Ø380 x 3000L
Gear Box &Chain Drive.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model FRS-Steam Heated • FRE-Electric Heated • FRT-Thermic Fluid Heated
ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
NET WT / CRATED WT
CRATED SIZE (WxDxH)
CRATED VOLUME
MODEL
0.56 KW
ROLLERDIA
(Padded)
ROLLER
LENGTH
ROLLER
SPEED
DRIVE
MOTOR
SUCTION
MOTORSTEAM
CONNECTIONCONSUMPTION
THERMIC FLUIDCONNECTION
CONSUMPTION
HEATINGAIR CONNECTION
AIR CONSUMPTIONDIMENSIONS
W x D x H
380 3000
2 to 6
Mtrs / Min
(Variable)1.5 KW 20 Ø (0.75”BSP)
15 Ø (0.5”BSP) 3950 x 800
x 1230
1500 Kg / 1800 Kg
4250 x 1100 x 15307.15 M³
FRS 38-300
FRE 38-300
FRT 38-300
20 Ø (0.75”BSP)FRS 38-300 FRT 38-300
ELECTRIC
18 / 27 KW
FRE 38-300
50 Ltrs / hr75 Kg / hr 40000 KCal / hr
Flatwork Drying Ironer. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )
Roller is driven by an electric motor coupledwith a reduction gear box unit. The final drive to the roller & Conveyor Feed belts isthrough sprockets & chain. Easy chaintensioning device. Silent drive. No speed loss of roller & conveyorfeed belts.
.
Variable Frequency Drive.
Single Motor workingin conjunction with Variable FrequencyDrive (VFD) provides precision & variable speeds for Roller Digital Temperature Control. Rocker switch for forward- reverse roller rotation. Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.
Roller is fabricated in steel & is precision machined with drilled perforations. Runs on self aligning ball bearings with moisture exhaust. Gear driven. Padded with steel galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.
Roller &Padding.
Fabricated in steel, precision machined, & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as Ironing of flat Linen.
Ironing Chest.
Conveyor Feed Belts.
Polyester feed belts with welded seams. Both ends joined with detachable S.S. Combs. Run on coarse rubberized surface of the conveyor feed roller. The conveyor feed roller is chain driven. Easy chain & feed belts tensioning device. Easily replaceable feed belts. No slippage.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model FRS-Steam Heated • FRE-Electric Heated • FRT-Thermic Fluid Heated
ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
NET WT / CRATED WT
CRATED SIZE (WxDxH)
CRATED VOLUME
MODELROLLER
DIA(Padded)
ROLLER
LENGTH
ROLLER
SPEED
DRIVE
MOTOR
SUCTION
MOTORSTEAM
CONNECTIONCONSUMPTION
THERMIC FLUIDCONNECTION
CONSUMPTION
HEATINGAIR CONNECTION
AIR CONSUMPTIONDIMENSIONS
W x D x HELECTRIC
0.75 KW530 3000 2.2 KW 25 Ø (1”BSP) 20 Ø (0.75”BSP)
Ø15 (0.5”BSP) 4220 x 1150
x 1300
FRS 53-300
FRE 53-300
FRT 53-300
FRS 53-300 FRT 53-300
36 KW
2450 Kg / 2750 Kg4520 x 1450 x 1600
10.48 M³
2 to 10
Mtrs / Min
(Variable)
FRE 53-300
100 Ltrs / hr100 Kg / hr 50000 Kcal / hr
‘FR’ Range. Roller Size: Ø530 x 3000L
Gear BoxDrive.
H
MOISTURE EXHAUST
STEAM / THERMIC FLUID CONNECTION
Model FS, FE & FT 53-300
WD
ELECTRIC CONNECTION
Front Feed - Front Return. Can be installed against a wall.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Flatwork Drying Ironers. Chest Heated. Pass Through Type. ( Front Feed, Rear Return. )
Model FS-Steam Heated • FT-Thermic Fluid Heated
NET WT / CRATED WTCRATED SIZE (WxDxH)
CRATED VOLUMEMODEL
NUMBEROF
ROLLS
ROLLERDIA
(Padded)
ROLLER
LENGTH
ROLLER
SPEED
MOTORS
DRIVE
HEATING
AIR CONNECTION
AIR CONSUMPTION
DIMENSIONSW x D x H
SUCTION
FS 53-300FT 53-300 530 3000
2 to 10Mtrs / Min(Variable)
2.2 KW
0.75 KW
2450 Kg / 2750 Kg4520 x 1450 x 1600
10.48 M³
15 Ø (0.5”BSP)
4220 x 1150
x 13001
STEAM CONNECTION
THERMIC FLUIDCONNECTION
CONSUMPTION CONSUMPTION
25 FS 53-300
Ø (1”BSP)
100 Kg / Hr 20 (0.75”BSP)
50000 KCal / hrØ
FT 53-300
100 Ltrs / hr
H
MOISTURE EXHAUST
STEAM / THERMIC FLUID CONNECTION D
ELECTRIC CONNECTION
2000 2000
Recommended*
* *
Adaptable to Automatic FolderModel FS & FT 53-300
W
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
.
Variable Frequency Drive.
Single Motor workingin conjunction with Variable FrequencyDrive (VFD) provides precision & variable speeds for Roller Digital Temperature Control. Rocker switch for forward- reverse roller rotation. Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.
Roller is fabricated in steel & is precision machined with drilled perforations. Runs on self aligning ball bearings with moisture exhaust. Gear driven. Padded with steel galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.
Roller &Padding.
Fabricated in steel, precision machined, & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as Ironing of flat Linen.
Ironing Chest.
Conveyor Feed Belts.
Polyester feed belts with welded seams. Both ends joined with detachable S.S. Combs. Run on coarse rubberized surface of the conveyor feed roller. The conveyor feed roller is chain driven. Easy chain & feed belts tensioning device. Easily replaceable feed belts. No slippage.
‘FS’ Range. Roller Ø 530
Roller is driven by an electric motor coupledwith a reduction gear box unit. The final drive to the roller & Conveyor Feed belts isthrough sprockets & chain. Easy chaintensioning device. Silent drive. No speed loss of roller & conveyorfeed belts.
Gear BoxDrive.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Flatwork Drying Ironers. Chest Heated. Pass Through Type. ( Front Feed, Rear Return. )
Gear BoxDrive.
.
Variable Frequency Drive.
Single Motor with VFD provides precision speeds for roller. All digital controls.Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.
Roller is precision machined with drilled perforations. Axial moisture exhaust. Gear driven. Padded with galvanized springs & polyester padding. Long roller & padding life.
Roller &Padding.
Precision machined & polished. Slides on pneumatic cylinders. Adjustable & uniformironing pressure across the entire roll. Finest drying & Ironing.
Ironing Chest.
Conveyor Feed Belts.
Polyester belts with welded seams are joined with detachable S.S. Combs. The feed roller is chain driven. Quick belt tensioning with easy replacement. No slippage or speed loss.
Roller is driven through a reduction gear box unit coupled with an electric motor. Simultaneous drive transmission to the conveyor feed belts. Silent drive. No speed loss.
H
W
MOISTURE EXHAUST
STEAM / THERMIC FLUID CONNECTION
D
D
D
Adaptable to Automatic FolderModel FS & FT 83-330. 1, 2 & 3 Roll
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model FS-Steam Heated • FT-Thermic Fluid Heated
NET WT / CRATED WTCRATED SIZE (WxDxH)
CRATED VOLUMEMODEL
NUMBEROF
ROLLS
13.75 KW
1.5 KW
4650 Kg / 5170 Kg
5150 x 2100 x 2000
21.63 M³
2
3
5.5 KW
1.5 KW
(2 Nos)
7.5 KW1.5 KW(3 Nos)
ROLLERDIA
(Padded)
ROLLER
LENGTH
ROLLER
SPEED
MOTORS
DRIVE
HEATING
AIR CONNECTION
AIR CONSUMPTION
DIMENSIONSW x D x H
830
830
830
3300
3300
3300
3 to 15Mtrs / Min(Variable)
5 to 25Mtrs / Min(Variable)
7 to 35Mtrs / Min(Variable)
20 Ø (0.75”BSP)
25 Ø (1”BSP)
4850 x 1800
x 1700
4850 x 2900
x 1700
4850 x 4000
x 1700
8720 Kg / 9630 Kg5150 x 2100 x 2000 (1 No.)
21.63 M³ + 15.45 M³
12790 Kg / 14090 Kg
FS 83-330 x 2
FT 83-330 x 2
FS 83-330 x 3
FT 83-330 x 3
FS 83-330 x 1
FT 83-330 x 1
15 Ø (0.5”BSP)
SUCTION
ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
25
STEAM CONNECTION
THERMIC FLUIDCONNECTION
180 Kg / hr
38 Ø (1.5”BSP)360 Kg / hr
CONSUMPTION CONSUMPTION
FS 83-330
FS 83-330-2
50 Ø (2”BSP)540 Kg / hr
FS 83-330-3
50 Ø (2”BSP)270000 KCal / hr
38 Ø (1.5”BSP) 180000 KCal / hr
25 Ø (1”BSP)90000 KCal / hr
Ø (1”BSP)FT 83-330
FT 83-330-2
FT 83-330-3
200 Ltrs / hr
400 Ltrs / hr
800 Ltrs / hr
5150 x 1500 x 2000 (1 No.)
5150 x 2100 x 2000 (1 No.)
21.63 M³ + 15.45 M³ + 15.45 M³ 5150 x 1500 x 2000 (2 Nos.)
‘FS’ Range. Roller Ø 8301, 2 & 3 Roll
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Micro Computer.
Programmed Computerprovides options of light shades, dark shades, gentle wash, strong wash, normal spin, high spin, short cycle & full cycle. Step by step LCD displayprovides cycle status &variable time signal. Easy to operate.
Inverter Drive.
Computer controlled single motor Variable Frequency Drive ( VFD ) gets all the speeds required for drycleaning, distribution, low, normal & high spin. The energy efficient drive reduces electric peak load demands.
Soft Mount. Tuned Suspension.
Dynamically tuned suspension with hydraulic cushions absorb even severe out-of-balance load vibrations. No special foundations required & the machine can be installed at any floor that can hold its dead weight.
2 Tanks, Twin Filters, Individual Pumps.
Separate tanks for light & dark shade solvent. Solenoid operated drains. Separate pumps inject the solvents into their respective filters for re-use. Intake of fresh solvent by pump. Simple filter system & operator’s convenience.
D
H
ELECTRICCONNECTION
W
MODEL
dry weight per charge (1:10)
Ø 900 x 500
318 Ltrs
CYLINDER SIZE
Ø 1100 x 650
617 Ltrs
5.5 KW
DRIVEMOTOR
11 KW
CYLINDER SPEEDS
WASH FINAL EXTRACT
40 to 50RPM
35 to 45RPM
800 RPM
720 RPM
Ø 500
Ø 650
LOADINGDOOR
OPENING
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
1520 Kg / 1720 Kg1600 x 1700 x 2420
6.58 M³
2650 Kg / 2910 Kg1900 x 2000 x 2700
10.26 M³
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
DMX 15 15 Kg
Ø 720 x 380
154 Ltrs2.2 KW 45 to 55
RPM900 RPM Ø 400
950 Kg / 1080 Kg1350 x 1360 x 2280
4.1 M³
1050 x 1060 x 1980
1300 x 1400 x 2120
1600 x 1700 x 2400
VOLUME
DMX 30
DMX 60
30 Kg
60 Kg
BASETANK
1
BASETANK
2
75Ltrs
75Ltrs
125Ltrs
125Ltrs
200Ltrs
200Ltrs
FILTER 1Surface
Area
FILTER 2Surface
Area
PUMP 1
PUMP 2
0.37 KW
0.37 KW
0.37 KW
0.37 KW
0.37 KW
0.37 KW
8006cm²
8006cm²
10832cm²
10832cm²
13660cm²
13660cm²
Drycleaning Machine. High Spin, Soft Mount. Multi Solvent. Computer Controlled. Upto 80% Solvent Recovery. 15, 30 & 60 kg. Capacity.
CAPACITY
‘DMX’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Firbimatic-Italy, Dry-to-Dry Perc Drycleaning Machines. Perchloroethylene Solvent. Computer Controlled. Upto 99.9% Solvent Recovery.8 kg. to 120 kg. Capacity.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Rear View. Vapour Induction Drying. Smart 10 Computer. PC Programmable.
1090 Kg / 1150 Kg1775 x 1640 x 2245
6.53 M³
MODELCYLINDER
SIZE DIMENSIONSW x D x H
NET WT / PACKED WTPACKED SIZE: WxDxH
CRATED VOLUMEVOLUME
10 Kg
15 Kg
Ø 700 x 505
Ø 800 x 560
Ø 1000 x 640
BASE TANKSDISTILL
CHAMBER
ECOFILTERVolumeSurface
DECOFILTERVolumeTubes
CONNECTION
FLOW RATE
75 Ltrs
100Ltrs
164Ltrs
260Ltrs
35 Ltrs
2.2 M²
75 Ltrs
5.5 M²
13 Ltrs
1 No
25 Ltrs
1 No
0.75” BSP
10 Ltrs/Min
0.75” BSP
15 Ltrs/Min
1575 x 1440 x 2045
1685 x 1505 x 2065
2080 x 1752x 2250
1220 Kg / 1300 Kg1885 x 1705 x 2265
7.27 M³
1980 Kg / 2080 Kg2280 x 1952 x 2450
10.9 M³
1 2 3
75 Ltrs
-
ELECTRIC POWER
STEAMHEATED
ELECTRICHEATED
4.5 KW 14 KW
WATER STEAMFor Steam
Heated Models
40 Kg/hrF 10 LT2
F 15 LT2105 Ltrs
105 Ltrs
- 35 Ltrs
2.2 M²13 Ltrs
1 No40 Kg/hr 4.5 KW 16 KW
9253 TANK
170 Ltrs
170 Ltrs
210 Ltrs 80 Kg/hr
0.75” BSP
30 Ltrs/Min
7.5 KW 22.5 KW25 Kg
Steam or Electric Heated
FIRBIMATIC MACHINES ARE AVAILABLE FROM 8 KG TO 120 KG CAPACITY & FOR USE WITH PERC OR HYDROCARBON SOLVENTS. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
Dry WeightPer Charge
CAPACITY
Self diagnostic Smart10 microprocessor system with manual override.
Stainless steel Cylinder, condenser still, water- separator & air circuit.
Step by step L.E.D. Display for operation cycle & maintenance.
Closed circuit with heat pump.
Large capacity refrigeration system with automatic cool down.
Continuous as well as batch distillation.
Large rotating nylon filter.
Additional carbon filter.
Double air filter with large surface area.
Automatic dry control.
Option of 2 & 3 storage tanks.
Tank to tank automatic solvent transfer.
Drum exhaust fan with active carbon filter.
Built in air compressor.
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Apparel Processing Machines with Low Spin Extract. Front Loading, Open Pocket. For Enzyme/Stone Washing, Dyeing & Speciality Washes.120, 240 & 360 kg. Capacity.
D
H
WSTEAM CONNECTION
WATER CONNECTION
AIR VENT
DRAIN
ELECTRIC CONNECTION
2750 for
PLS 360T
Model PLS-Steam Heated • T-Hydraulic Forward Tilt
THE LOADING ENZYME/STONE WASHING, DYEING & OTHER SPECIALITY WASHES, THE CAPACITY MAY REDUCE BY 50% OR MORE.CAPACITY IS FOR REGULAR SOAP WASH. FOR
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Apparel Sampling Machine with Normal Spin Extract. 15 kg Capacity. PXS-Steam Heated • PXE-Electric Heated
Ø 720 x 380
154 Ltrs
15 to 50RPM
(Variable)
500RPM Ø 500
Ø20 (0.75” BSP)
200 Ltrs / cycleØ 75 Ø15 (0.5” BSP)
15 Kg / hr
PXS 15PXE 15
15 Kg640 Kg / 750 Kg
1250 x 1300 x 17802.89 M³
2.2 KW 950 x 1000
x 1480
6 / 12 KW
PXS 30 PXE 30
MODEL
Ø 1600 x 1250
2410 Ltrs
CYLINDER SIZE
Ø 1800 x1450
3687 Ltrs
WASH MOTOR
CYLINDER SPEEDS
WASH EXTRACT
120 RPM
100 RPM
Ø 1000
Ø 1000
LOADINGDOOR
OPENING
WATERCONNECTION
CONSUMPTION
Ø50 (2” BSP)
3200 Ltrs / cycle
Ø50 (2” BSP) 2 Nos.
4800 Ltrs / cycle
Ø 150
Ø 150
DRAIN
STEAM
CONNECTIONCONSUMPTION
Ø25 (1” BSP)
240 Kg / hr
Ø25 (1” BSP)
360 Kg / hr
DIMENSIONSW x D x H
NET WT / CRATED WTSHIPPING SIZE: WxDxH
SHIPPING VOLUME
Ø 1350 x 850
1216 Ltrs
15 to 50RPM
(Variable)
160RPM Ø 800
Ø50 (2” BSP)
1600 Ltrs / cycleØ 100
Ø25 (1” BSP)
120 Kg / hr
VOLUME
PLS 120
PLS 240
PLS 360TForward Tilt
120 Kg
360 Kg
2850 Kg / 3290 Kg2100 x 2700 x 2450
4700 Kg / 5200 Kg2300 x 3150 x 2650
1560 Kg / 1810 Kg1850 x 2200 x 2300
19.1 M³
13.8 M³
9.36 M³5.5 KW
11 KW
18.5 KW
15 to 50RPM
(Variable)
15 to 50RPM
(Variable)
1550 x 1900 x 2000
1800 x 2400 x 2150
2000 x 2850 x 2350
AIR
CONNECTIONCONSUMPTION
Ø15 (0.5” BSP)
30 Ltrs / hr
Ø15 (0.5” BSP)
60 Ltrs / hr
Ø15 (0.5” BSP)
100 Ltrs / hr
dry wt. per
charge (1:10)
CAPACITY
Simple, Efficient Inverter Drive.Single motor inverter drive gets all precision speeds required for enzyme/stone washing, dyeing, turbo dyeing & other speciality washes. Low spin extract is affected by the same motor. The energy efficient drive reduces electric peak load demands.
Digital Time & Temperature Control.A digital timer runs the process for the preset time & gives flash light signal at the end of each cycle. Another digital timer controls the low spin extract time. Auto digital temperature control. Individual controls for cylinder speed, water, steam & drain valve. Easy to operate.
Sampling Machine with Normal Spin Extract.Front loading, open pocket. Single motor variable frequency drive. Precision speeds for special washes & turbo dyeing. Stainless steel front, outer drum & inner cylinder. Solenoid operated water & steam valves. Motorized drain valve. Auto timed & digital temperature control. Does not require separate Hydro Extractor.
Self Unloading on 360 kg Machine.Hydraulic forward tilt on 360kg machine drops the entire load into a trolley in less than 30 seconds. Optional : 5 tankautomatic dozing. One operator can handle up to 4 machines. Huge savings on time & labor.
240 Kg
‘PL’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Simple, Efficient Inverter Drive.Single motor inverter drive gets all precision speeds required for enzyme/stone washing, dyeing, turbo dyeing & other speciality washes. Low spin extract is affected by the same motor. The energy efficient drive reduces electric peak load demands.
Digital Time & Temperature Control.A digital timer runs the process for the preset time & gives flash light signal at the end of each cycle. Another digital timer controls the low spin extract time. Auto digital temperature control. Individual controls for cylinder speed, water, steam & drain valve. Easy to operate.
Apparel Processing Machines with Resin Spray Attachment & Low Spin Extract. Front Loading, Open Pocket. For Wrinkle-free spray treatment,
D
2750 for
PLS360TH
W STEAM CONNECTION
WATER CONNECTION
AIR VENT
ELECTRICCONNECTION
Model PRS - Steam Heated T - Hydraulic Forward Tilt
THE LOADING CAPACITY IS FOR REGULAR SOAP WASH. FOR RESIN SPRAY, ENZYME / STONE WASHING, DYEING & OTHER SPECIALITY WASHES, THE CAPACITY MAY REDUCE BY 50% OR MORE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES ONLY.
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Ø 720 x 380
154 Ltrs
15 to 50RPM
(Variable)
500RPM Ø 500
Ø20 (0.75” BSP)
150 Ltrs / cycleØ 75
PXRS 15
PXRE 1515 Kg
760 Kg / 870 Kg1250 x 1300 x 1780 (1 No.)
2.89 M³ + 1.07 M³
2.2 KW 950 x 1000
x 1480
Apparel Sampling Machine with Normal Spin Extract. 15 kg Capacity. PXS - Steam Heated PXE - Electric Heated
Ø15 (0.5” BSP)
15 Kg / hr
PXRS 30
6 / 12 KW
MODEL
Ø 1600 x 1250
2410 Ltrs
CYLINDER SIZE
Ø 1800 x1450
3687 Ltrs
WASH MOTOR
CYLINDER SPEEDS
WASH EXTRACT
120 RPM
100 RPM
Ø 1000
Ø 1000
LOADINGDOOR
OPENING
WATERCONNECTION
CONSUMPTION
Ø50 (2” BSP)
2400 Ltrs / cycle
Ø50 (2” BSP) 2 Nos.
3600 Ltrs / cycle
Ø 150
Ø 150
DRAINSTEAM
CONNECTION
CONSUMPTION
Ø25 (1” BSP)
240 Kg / hr
Ø25 (1” BSP)
360 Kg / hr
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: WxDxH
CRATED VOLUME
Ø 1350 x 850
1216 Ltrs
15 to 50RPM
(Variable)
160RPM Ø 800
Ø50 (2” BSP)
1200 Ltrs / cycleØ 100 Ø25 (1” BSP)
120 Kg / hr
VOLUME
PRS 120
PRS 240
PRS 360T
240 Kg
120 Kg
360 Kg
3150 Kg / 3590 Kg2100 x 2700 x 2450 (1 No.)
5100 Kg / 5600 Kg2300 x 3150 x 2650 (1 No.)
1880 Kg / 2110 Kg1850 x 2200 x 2300 (1 No.)
19.1M³ + 1.68 M³
13.8M³ + 1.68 M³
9.36 M³ + 1.68 M³5.5 KW
11 KW
18.5 KW
15 to 50RPM
(Variable)
15 to 50RPM
(Variable)
1550 x 1900 x 2000
1800 x 2400 x 2150
2000 x 2850 x 2350
AIRCONNECTION
CONSUMPTION
Ø15 (0.5” BSP)
30 Ltrs / hr
Ø15 (0.5” BSP)
60 Ltrs / hr
Ø15 (0.5” BSP)
100 Ltrs / hr
PXRE 30
800 x 1400 x 1500 (1 No.)
800 x 1400 x 1500 (1 No.)
800 x 1400 x 1500 (1 No.)
750 x 1100 x 1300 (1 No.)
Enzyme/Stone Washing, Dyeing & Speciality Washes. 120, 240 & 360 kg. Capacity.
Resin Mist Spray.High pressure 7 nozzles manifold atomize the resininto a mist sprayfor uniform absorption.
Tremendous savings on resin costs.
Self Unloading.Hydraulic forwardtilt drops the load in less than 30 sec. Optional : Computerized high spin.
Savings on time & labor.
‘PR’ Range
dry wt. per
charge (1:10)
CAPACITY
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Stainless Steel Polished Head.
Curved pressing surface is steam jacketed & is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing. Operator’s safety & convenience.
Digital Timed Release.
Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resetsto preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.
Rocker Arms, Air Cylinder & Springs.
Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. A pneumatic cylinder with solenoid operated air control valves affect raising & lowering of head. Smooth operation of Rocker Arms & Head.
General Utility Laundry Press.
Pneumatically Operated.S.S Polished Head.Padded Buck. Auto Timed Release.
1200R
H
1900
D
300480
1400
W
MODEL STEAMCONNECTION
STEAMCONSUMPTION
AIR CONSUMPTION
1450 x 1250 x 1280
CRATED SIZE: WxDxHCRATED VOLUME
LGS 140Ø15 (0.5” BSP)
at 6Kg / cm²
30Kg / hr 80 Ltrs/Minute
4.28 M³
AIR CONNECTION
NET WEIGHT
CRATED WEIGHT
480 Kg 580 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6Kg / cm²
1750 x 1550 x 1580
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Model : LGS 140
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Stainless Steel Polished Head.
Curved pressing surface is steam jacketed & is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing.Operator’s safety & convenience.
Digital Timed Release.
Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resets to preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.
Rocker Arms, Air Cylinder & Springs.
Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. A pneumatic cylinder with solenoid operated air control valves affect raising & lowering of head. Smooth operation of Rocker Arms & Head.
Twin Topper Laundry Press.
W
1200R
900
350
H
1900
D
MODEL STEAMCONNECTION
STEAMCONSUMPTION
AIR CONSUMPTION
1250 x 1250 x 1280
CRATED SIZE: WxDxHCRATED VOLUME
LGS 90 Ø15 (0.5” BSP)at 6Kg / cm²
25Kg / hr 80 Ltrs/Minute
1550 x 1550 x 1580 3.79 M³
AIR CONNECTION
NET WEIGHT
CRATED WEIGHT
440 Kg 540 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6Kg / cm²
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.S.S Polished Head.Padded Buck. Auto Timed Release.
Model : LGS 90
200
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Steaming Head &Steaming Buck.
Curved pressing surface is steam jacketed, perforated &is lined with heat resistant fabriccover. Head is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment & fine pressing.
Digital Timed Release.
Automatic sequential digital timers can be preset for head steam, buck steam, vacuum & head release besides foot operated switches. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of garments.
Rocker Arms, Air Cylinder & Springs.
Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. Apneumatic cylinder with solenoid operated air control valves affect raising & lowering of head.Smooth operation of Rocker Arms & Head.
General Utility Drycleaning Press.
Centrifugal Suction Blower.
Coupled with Bed through a flexible duct. Mounted on a high torque electric motor for quick start. Automatic start at the time of pressing & stop at the time of release. Keeps padding dry at all times. Efficient moisture suction. Quick drying of buck.
250
1200
5001200R
H
1900
DW
MODEL STEAMCONNECTION
STEAMCONSUMPTION
AIR CONSUMPTION
1450 x 1250 x 1280
CRATED SIZE: WxDxHCRATED VOLUME
GUS 120Ø15 (0.5” BSP)
at 6Kg / cm²
40Kg / hr 80 Ltrs/Minute
4.28 M³
AIR CONNECTION
NET WEIGHT
CRATED WEIGHT
460 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6Kg / cm²
560 Kg
1750 x 1550 x 1580
VACUUMBLOWER
0.75 KW
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.Steaming Head & Steaming Buck.Built in Centrifugal Vacuum. Foot Switches.Sequential Timers.
Model : GUS 120
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Steaming Head &Steaming Buck.
Curved pressing surface is steam jacketed, perforated &is lined with heat resistant fabriccover. Head is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment & fine pressing.
Digital Timed Release.
Automatic sequential digital timers can be preset for head steam, buck steam, vacuum & head release besides foot operated switches. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of garments.
Rocker Arms, Air Cylinder & Springs.
Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. Apneumatic cylinder with solenoid operated air control valves affect raising & lowering of head.Smooth operation of Rocker Arms & Head.
Twin Topper Drycleaning Press.
Centrifugal Suction Blower.
Coupled with Bed through a flexible duct. Mounted on a high torque electric motor for quick start. Automatic start at the time of pressing & stop at the time of release. Keeps padding dry at all times. Efficient moisture suction. Quick drying of buck.
1200R
900
350
H
1900
DW
MODELSTEAM
CONNECTIONSTEAM
CONSUMPTIONAIR
CONSUMPTION
1150 x 1250 x 1280
CRATED SIZE: WxDxHCRATED VOLUME
GUS 90Ø15 (0.5” BSP)
at 6Kg / cm²
35Kg / hr 80 Ltrs/Minute
3.55 M³
AIR CONNECTION
NET WEIGHT CRATED WEIGHT
430 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6Kg/cm²
530 Kg
1450 x 1550 x 1580
VACUUMBLOWER
0.75 KW
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.Steaming Head & Steaming Buck.Built in Centrifugal Vacuum. Push Button Operation. Foot Switches.Sequential Timers.Steam Heated.
Model : GUS 90
200
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Flat Bed Drying Press.
Digital Time & Temperature. Automatic release of head at preset time. Auto reset for next operation.Digital temperature controller for electric thermic fluid heated
Centrifugal Suction Blower.Connected with Bed. Mounted on a high torque electric motor for quick start. Auto start at the time of pressing & stop at the time of release.
Rocker Arms, Air Cylinder.Rocker arms move on ball bearings. Front head weight is counter balanced by springs. A pneumatic cylinder is activated by jumbo push buttons
1500
W
H
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model FPS-Steam Heated • FPE-Electric Thermic Fluid Heated • FPT-Thermic Fluid Heated.
at the front affect raising & lowering of head. Smooth operation of rocker arms & head.
Keeps padding dry at all times. Efficient moisture suction. Quick drying time.
model. Safe drying & fine pressing of flat linen or garments.
D
1900
750
Pneumatically Operated. Buck with Moisture Suction. Auto Timed Release. Head Size : 1500 x 750
MOIST AIREXHAUST
THE ABOVE MODEL SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & PRESS SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.
FPS 150
MODEL
FPE 150
HEAD &BED SIZE
1500 x 750
STEAM CONNECTION
CONSUMPTION
ELECTRICTHERMIC FLUID CONNECTION
CONSUMPTION
DIMENSIONSW x D x H
NET WT / CRATED WTCRATED SIZE: W x D x H
CRATED VOLUME
FPT 150
FPE 15012 / 18 KW
1600 x 1500 x 1280
580 Kg / 790 Kg1900 x 1800 x 1580
5.4 M³
HEATING
FPT 1500.5” x 0.5” BSP16000 KCal / hr
AIR
CONNECTION
Ø15 (0.5” BSP)
100 Ltrs / Minute
6 Kg / cm²
AIR CONSUMPTION
AIR PRESSURE
‘FP’ Range
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
FPS 150 15 Ø (0.5” BSP)
30 Kg / hr
Shirt Cuff & Collar Press.
Stainless Steel Polished Head.
Curved pressing surface is steam jacketed & is spring suspended onrocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing. Operator’s safety & convenience.
Digital Timed Release.
Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resets to preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.
Rocker Arms, Air Cylinder & Springs.
Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. A pneumatic cylinder with solenoid operated air control valves affect raising & lowering of head. Smooth operation of Rocker Arms & Head.
W
170
450200 200
H
1900
D
MODEL STEAMCONNECTION
STEAMCONSUMPTION
AIR CONSUMPTION
950 x 1250 x 1280
CRATED SIZE: WxDxHCRATED VOLUME
CFS 90Ø15 (0.5” BSP)
at 6Kg /cm²
25Kg / hr 80 Ltrs/Minute
1250 x 1550 x 1580
3.06 M³
AIR CONNECTION
NET WEIGHT
CRATED WEIGHT
470 Kg
570 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6Kg/cm²
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz,AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.S.S Polished Head.Padded Buck. Auto Timed Release.
Model : CFS 90
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Shirt Body & Sleeve Finisher. Cocchi, Italy.
Mobile Front & Back Pad.
Mobile front & back pads, actuated pneumatically, hold the garment firmly on to the mannequin. Adjustable pneumatic clamps hold the sleeves & keep the garment in upright position. The pads & clamps release the garment automatically at the end of each cycle. Accurate positioning results fine finishing.
Digital Sequential Timers.
3 nos. sequential timers activate live steam, steam hot air combination & super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.
Powerful Blower.
Connected to mannequin. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer & foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.
W D
MODELSTEAM
CONNECTIONSTEAM
CONSUMPTIONAIR
CONSUMPTION
2100 x 1800 x 2050
CRATED SIZE: WxDxHCRATED VOLUME
Ø15 (0.5” BSP)at 6 Kg/cm²
30 Kg / hr 80 Ltrs/Minute
3.75 M³
AIR CONNECTION
NET WEIGHT
CRATED WEIGHT
350 Kg 460 Kg
DIMENSIONSW x D x H
Ø15 (0.5” BSP) at 6 Kg/cm²
BLOWER MOTOR
0.75 KW1080 x 1480 x 2350
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.Mobile Front & Back Pad Application.Pneumatic Clamps.Sequential Timers.Foot Switches.
Model : CG-B EasyMAK III
H
CG-B EasyMAK III
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Knitwear Upsteam Finishing Press with Fabric Head Frame.
Foot Pedals for Upsteam & Suction.
Separate foot pedals for steam release & to activate suction through pneumatically operated steam/suction manifold. Conveniently located, spring loaded foot pedals release both hands of the operator to finish the garment in its proper shape with ease. Operator’s convenience.
Pneumatically OperatedSteam / Suction Manifold.
Centrifugal Suction Blower.
Connected to slanting table top. Mounted on ahigh torque electric motor for quick start. Activated by spring loaded foot pedals. Low noise & vibration less performance. Efficient moisture suction. Quick drying of table top& padding.
Silicon / Molleton Padding.
Perforated aluminum topwith reinforced steam jacket underneath. The top padding consist of layers of aluminum wire-mesh, silicon/molleton foam & heat resistant top cover. High porosity. Uniform distribution of upsteam. Quick suction.
Air actuated 2 way manifoldreleases upsteam or activates suction at the command of their respective foot pedals. Stainlesssteel construction, teflon seating,& high temperature resistant pneumatic cylinder make the manifold trouble free for continuous repeat operations. Reliable throughout its life time.
W D
2000
MODELVACUUMBLOWER
BLOWERCAPACITY
AIR CONNECTION
CONSUMPTION
KG 2001900 Ltrs / Sec
(850 CFM)
STEAM CONNECTION
CONSUMPTION
DIMENSIONSW x D x HBED SIZE
2000 x 1000 0.75 KWØ 15 (0.5” BSP)
40 Kg / hr
Ø 15 (0.5” BSP)
15 Ltrs / Min2170 x 1320 x 1050
NET WT / CRATED WTCRATED SIZE : W x D x H
SHIPPING VOLUME
560 Kg / 690 Kg2470 x 1620 x 1350
5.4 M³
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Large Slanting Table Top. Quick Steam Distribution.Powerful Suction.Bed Size : 2000 x 1000
Model : KG 200
H
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Dress Form Finisher.
Mobile Front Pad.
Mobile front pad, actuated pneumatically, hold the garment firmly on to the mannequin. Adjustable pneumatic clamps hold the sleeves & keep the garment in upright position. The front pad & sleeve clamps release the garment automatically at the end of each cycle. Accurate positioning results fine finishing.
Digital Sequential Timers.
3 nos. sequential timers activate live steam, steam hot air combination &super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.
Powerful Centrifugal Blower.
Connected to mannequin. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer & foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.
W D
MODEL STEAMCONNECTION
STEAMCONSUMPTION
AIR CONSUMPTION
CRATED SIZE: WxDxHCRATED VOLUME
AIR CONNECTION
NET WEIGHT CRATED WEIGHT
DIMENSIONSW x D x H
BLOWER MOTOR
2100 x 1800 x 1600SIF 500 20 Kg / hr 80 Ltrs/Minute
3.59 M³
350 Kg
460 Kg
Ø15 (0.5” BSP) at 6 Kg/cm²
0.75 KW1050 x 1800 x 1900Ø15 (0.5” BSP)
at 6 Kg/cm²
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.Mobile Front Pad Application.Pneumatic Clamps.Sequential Timers.Foot Switches.
Model : SIF 500
H
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Trouser Form Finisher.
Mobile Waist Band.
Mobile waist band & front clamp, actuated pneumatically, hold the trouser firmly. Pneumatic clamps with self adjusting height hold the bottoms firmly & keep the trouserin upright position. The waist band & bottom clamps release the trouser automatically at the end of each cycle. Accurate positioning results fine finishing.
Digital Sequential Timers.
3 nos. sequential timers activate live steam, steam hot air combination & super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.
Powerful Centrifugal Blower.
Connected to waist band duct. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer or foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.
W
H
D
MODELSTEAM
CONNECTIONSTEAM
CONSUMPTIONAIR
CONSUMPTIONCRATED SIZE: WxDxH
CRATED VOLUMEAIR
CONNECTION
NET WEIGHT
CRATED WEIGHT DIMENSIONS
W x D x HBLOWER MOTOR
750 x 1100 x 1950STP 500Ø15 (0.5” BSP)
at 6Kg/cm²
20Kg / hr 80 Ltrs/Minute
3.30 M³
350 Kg 460 Kg
Ø15 (0.5” BSP) at 6Kg/cm²
0.75 KW1050 x 1400 x 2250
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
Pneumatically Operated.Self Adjusting Waist Clamp.Self Adjusting Leg Length.Sequential Timers.Foot Switches.
Model : STP 500
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Vacuum Finishing Table.
Silicon Padding.S.S. Table Heater.
Perforated top has thermostatically controlled electric heating elementunderneath. On the top, layers of aluminum wiremesh, silicon foam & heat resistant top cover form high porosity padding. Efficient airflow. Padding remains dry at all times.
Centrifugal Suction Blower.
Connected to table top. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Efficient moisture suction. Quick drying of table top & padding.
Extended Exhaust Duct.Flourescent Tube light.
Moist air is exhausted upwards with extended duct. Garment shelf with concealed flourescent tube light is mounted on to the duct at a height so that the table top is uniformly illuminated & the garment shelf can be conveniently used. Clean environment. Operator’s convenience.
W D
H
SLEEVE BUCK MODEL SL 800
800
120
60
800
200
350
UTILITY BUCK MODEL UT 800
ATTACHMENTS
MODEL TABLE TOP SIZE SUCTION MOTOR OVERALL DIMENSIONS W x D x H NET WT CRATED WT CRATED SIZE W x D x H CRATED VOLUME
VF 120
VF 150
1200 x 750
1500 x 900
0.37 KW
0.75 KW
1230 x 890 x 1850
1550 x 1040 x 1850
165 Kg
190 Kg
220 Kg
265 Kg
1430 x 1090 x 1300
1750 x 1240 x 1300
2.02 M³
2.82 M³
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Rectangular Table Top.Extended Exhaust Duct withRack & tube light.
Model : VF 120Model : VF 150
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Silicon Padding.S.S. Table Heater.
Perforated top has thermostatically controlled electric heating elementunderneath. On the top, layers of aluminum wire mesh, silicon foam & heat resistant top cover form high porosity padding. Efficient airflow. Padding remains dry at all times.
Centrifugal Suction Blower.
Connected to dress board. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Efficient moisture suction. Quick drying of dress board top & padding.
Extended Exhaust Duct.Both Side Operation.
Moist air is exhausted upwards with an extended duct. Pressing top is Ideal for dresses including the one that are narrow from the waist & broader at the bottom. Foot pedals at both sides & extended swivelling type iron rest felicitates ironingfrom both sides of the dress board. Clean environment. Operator’s convenience.
W
H
D
1400
200 550
MODEL
VT 140
TABLE TOP SIZE
1400 x 550 x 200
SUCTION MOTOROVERALL DIMENSIONS
W x D x H NET WT CRATED WT CRATED SIZE W x D x H CRATED VOLUME
0.37 KW 1800 x 560 x 1850 170 Kg 225 Kg 1800 x 850 x 1300 1.98 M³
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
General Utility Table Top.Extended Exhaust Duct.Dual Foot Pedals.
Vacuum Dress Finishing Board. Model : VT 140
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
SB 20 with SE 4
Steam Irons & Accessories.
Electric Steam Iron All Steam Iron
Teflon Shoes
Hard Anodized die cast sole plate with 24 nos built in moisture traps. Rubberized handle with concealed soft micro switch.Thermostatically controlled die cast heating element. Complete with steam hose & electric cable.
Stainless Steel steam chamber & perforated stainless steel sole plate. No electric heating element. Steam heated. External thumb pressed steam release lever. Efficient continuous moisture removal. Complete with steam hose.
High Quality thick Teflon sheet heat sealed with aluminum plate, densely perforated. Aluminum armored, Spring loaded, perfect fit with sole plate. Anti shine & scorch free ironing.
200
120
210
125
Multi Table Installation Kit
Free Standing base frame & vertical columns. Interconnecting insulated steam lines with valves & flanged ends. Large capacity moisture trap at the end. Concealed cabling through steel conduits with DP switch. Quick & Neat Installation.
With steam solenoid valve & regulator. Inner shell in stainless steel duly insulated. Complete with metallic breaded insulated teflon hose for steam inlet & steam return with valve, interconnecting cable, switches & mounting stand.
MODEL
ES 20
WEIGHT WATTS
VOLTAGE
1.9 Kg900
220 Volts, AC250 x 150 x 160
PACKED SIZEPACKED WEIGHT
2.2 Kg
MODEL
AS 21
WEIGHT STEAM INLET
1.5 Kg
STEAM PRESSURE
230 x 150 x 150
PACKED SIZEPACKED WEIGHT
1.9 Kg
Ø 6(0.25” BSP)
3 to 5 Kg/cm²
STEAM
INLET
2 to 5 Kg/cm²
MODEL
TF 20
WEIGHTSOLETHICKNESS
0.1 Kg 230 x 140 x 20
PACKED WEIGHT
0.15 Kg
PACKED SIZE
3 mm
MODEL
SB 20
WEIGHT WATTSVOLTAGE
1.2 Kg900
220 Volts, AC450 x 150 x 125
PACKED SIZEPACKED WEIGHT
1.5 Kg
Ø 6 (0.25” BSP)
STEAM INLET
2 to 5 Kg/cm²Ø 6 (0.25” BSP)
MODEL
CS 3
WEIGHTELECTRIC POWER
4.5 Kg220 Volts, AC500 x 200 x 170
PACKED SIZEPACKED WEIGHT
5.5 Kg
STEAM INLET / DRAIN
2 to 5 Kg/cm²Ø 6 (0.25” BSP)
MODEL
IK 130
ELECTRICPOWER
1500 x 250 x 250
PACKED SIZE / KITPACKED WEIGHT / KIT
20 Kg
MAINSTEAM INLET
6 to 7 Kg/cm²Ø 15 (0.5” BSP)
STEAMOUTLETS
Steam Brush
Directly finishes on a hanger or a mannequin. Heat proof handle with push button for steam release. Easy to use. Imparts fine finish.
An Ideal Device to finish high fashion difficult to iron garments.
Ø 15 (0.25” BSP) 220 Volts, AC
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Electric Steam Iron, All Steam Iron, Teflon Shoes, Steam Brush,Condensate Separator & Installation Kit.
Model : ES 20 Model : AS 21
Model : TF 20 Model : SB 20
Model : CS 3 Model : IK 130Condensate Separator
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Pressure operated diaphragm type switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeat operations.
Stainless steel float ball working in conjunction with industrial type micro switches for low / high water level regulation prevents dry running of heating elements & at the same time prevents over filling of pressure vessel. Fail safe dry cut out. Easy to dismantle & refit.
S.S. 304 quality sheathing, porcelain insulation & thick flange to with stand high pressure in the stainless steel pressure vessel. The configuration of electric load can be modified from1 phase to 3 phase & vice-versa. Easy to dismantle & refit.
Steam Generator. Electric, Portable & Automatic.
For steam supply
of 4 kg/hr at 3 kg/cm².
Suitable for 1 Steam Iron
or equivalent.
Float Type Water Level Controller.
PressureControl Switch.
Stainless Steel Heating Element.
Stainless Steel Pressure Vessel. Audio/Video Signal for Low Water Level. Steam Solenoid Valve with Flow Control Knob.
H
W D
MODEL STEAM PRESSURE
STEAMCAPACITY
350 x 400 x 800
CRATED SIZE: WxDxHCRATED VOLUME
SE 4 3Kg / cm²4Kg / hr
0.22M³
NET WEIGHT CRATED WEIGHT
70 Kg 90 Kg
DIMENSIONSW x D x H
450 x 500 x 1000
PRESSUREVESSEL
12 Ltrs
ELECTRICHEATERS
2 / 3 Kw
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model : SE 4
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Steam Generator. Electric, Portable & Fully Automatic.
Pressure operated diaphragmtype switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeatoperations.
Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents dry running of heating elements &at the same time prevents overfilling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.
S.S. 304 quality sheathing,porcelain insulation & thick flange to with stand high pressure in the stainless steel pressure vessel. Theconfiguration of electric load can be modified from 1 phase to 3 phase & vice-versa. Easy to dismantle & refit.
Float Type Water Level Controller.
PressureControl Switch.
Stainless Steel Heating Element.
Stainless Steel Pressure Vessel. Built in Water Storage Tank. Audio/Video Signal for Low Water Level. Steam Solenoid Valves with Flow Control Knobs.
For steam supply
of 8 kg/hr at 4 kg/cm².
Suitable for 2 Steam Irons or equivalent.
Motorized Water Feed Pump.
A mono block type high pressure Peripheralpump automatically injects water into the pressure vessel as & when signaled by the water level regulator.The peripheral impeller eliminates any back pressure.Fail safe, positive water feed each time.
H
W D
WATERSTORAGETANK
MODELSTEAM
PRESSURESTEAM
CAPACITY
350 x 600 x 1000
CRATED SIZE: WxDxHCRATED VOLUME
SE 8 4 Kg / cm²8Kg / hr
0.37M³
NET WEIGHT CRATED WEIGHT
110 Kg 140 Kg
DIMENSIONSW x D x H
450 x 700 x 1200
PRESSUREVESSEL
12 Ltrs
ELECTRICHEATERS
2 / 4 / 6 Kw
WATER FEED PUMP
0.7 KW
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Model : SE 8
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Pressure operated diaphragmtype switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeatoperations.
Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents dry running of heating elements & at the same time prevents overfilling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.
S.S. 304 quality sheathing,porcelain insulation & thick flange to with stand high pressure in the carbon steel pressure vessel. Choice of 12,18 & 36 Kw with independent rockerswitches mounted with thefront control panel. Easy to dismantle & refit.
Steam Generator. Electric & Fully Automatic.
Float Type Water Level Controller.
PressureControl Switch.
Stainless Steel Heating Element.
A belt driven, high pressurepiston type pump automaticallyinjects water into the pressure vessel as & when signaled by the water level regulator.The dual pistons with built itnon return device eliminates any back pressure. Fail safe, positive water feed each time.
For steam supply
of 40 kg/hr at 6 kg/cm².
Suitable for 10 Steam Irons or
equivalent.
Motorized PistonWater Feed Pump.
H
W
STEAM OUTLET(On both sides)
D
WATER INLET
WATER STORAGETANK
MODEL STEAM PRESSURE
STEAMCAPACITY
800 x 650 x 1120
CRATED SIZE: WxDxHCRATED VOLUME
SE 40 6 Kg / cm²40 Kg / hr
1.48 M³
NET WEIGHT
CRATED WEIGHT
230 Kg 290 Kg
DIMENSIONSW x D x H
1100 x 950 x 1420
PRESSUREVESSEL
20 Ltrs
ELECTRICHEATERS
12 / 24 / 36 KW
WATER FEED PUMP
1.5 KW
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Carbon Steel Pressure Vessel. Built in Water Storage Tank.Audio/Vedio Signal for Low Water Level.
Model : SE 40
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Pressure operated diaphragmtype switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeatoperations.
Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents running of burner & at the same time prevents over filling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.
A vertically mounted, motorized burner fires fuel-air combination intoa 3-pass design, storagetype pressure vessel.Pressure of the fire flame & design of the vessel is such that maximum heatis used. High on economy,low on maintenance.
Steam Generator. Diesel/Gas Fired. Fully Automatic.
Float Type Water Level Controller.
PressureControl Switch.
A belt driven, high pressurepiston type pump automaticallyinjects water into the pressure vessel as & when signaled by the water level regulator.The dual pistons with built itnon return device eliminates any back pressure. Fail safe, positive water feed each time.
Motorized PistonWater Feed Pump.
For steam supply
of 60 kg/hr at 6 kg/cm².
Suitable for 14 Steam Irons or
equivalent.
Diesel/Gas fired Burner.
FLUE GASEXHAUST
STEAM OUTLET
(On both sides)
H
W D
WATER INLET
WATER STORAGETANK
MODELSTEAM
PRESSURESTEAM
CAPACITY
750 x 880 x 1780
CRATED SIZE: WxDxHCRATED VOLUME
SD 60SG 60
6 Kg / cm²60 Kg / hr
2.57 M³
NET WEIGHT CRATED WEIGHT
390 Kg 480 Kg
DIMENSIONSW x D x H
1050 x 1180 x 2080
PRESSUREVESSEL
20 Ltrs
HEATING WATER FEED PUMP
1.5 KW
DIESEL GAS
SD 603 Ltr / hr
SG 603 Kg / hr
Model SD-Diesel Fired SG-Gas Fired
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Carbon Steel Pressure Vessel. Built in Water Storage Tank.Audio/Vedio Signal for Low Water Level.
Model : SD 60Model : SG 60
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Powerful Centrifugal Suction Blower.
Thread Blowing Machine.
W
MODELBLOWER MOTOR
EXHAUSTDUCT SIZE
690 x 1400 x 1650
CRATED SIZE: WxDxHCRATED VOLUME
TBM 2000 3.75 KW 300 x 300 3.29 M³
NET WEIGHT CRATED WEIGHT
320 Kg
DIMENSIONSW x D x H
425 Kg
990 x 1700 x 1950
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
GARMENT DUCT OPENING
600 x 180
Connected to garment trough through a duct. Belt driven by a high torque electric motor for quick start. Fitted with air flow control damper. Activated by foot switch. Maintains powerful flow of air to blow away loose threads & dust. Vibration less performance.
GARMENT DUCTLENGTH
1150
Adjustable Foot Pedal.
A full length, spring loaded foot pedal working in conjunction with sturdy micro switch instantly activates the suction blower when press down & stops the suction when released. Can be extended or receded accordingto operator’s reach. Operator’s comfort & convenience.
All Metal Body. Acrylic see-through Garment Trough. Adjustable Air Flow. Built-in Garment Trap.
Model : TBM 2000
D
H
GARMENT TRAP
EXHAUST
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Stain Removing Machine.
Metal forged single piece spotting guns for high pressure “Air-chemical” combination jet spray. Spring suspended foreasy use & quick retraction. Replaceable nozzles. Single lever operation with built in air-chemical flow control. Long rust free life.
Stainless SteelSpotting Guns.
Stainless Steel Work Station.
Stainless steel tapered basin with fine meshnose. Narrow, swivelling type sleeve arm. Connected to powerful suction blower. Ecological suction, concealed tube light, chemical rack & underneath spill rack are integrally formed. Long rust free life. Operator’s convenience .
Centrifugal Suction Blower.
Connected to S.S basin. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Quick chemical suction. Keeps working area odour free. Hygienic for operator.
Steam-Air Combination Gun.
For hot spotting. Heatproof plastic cover with built in micro switches for steam, air & steam-air combination. Stainless steel nozzle. Built in manifold for steam & air.Connected to compressed air & condensate separator. Easy to use. Dry steamat all times.
W D
H
MODELSLEEVE
ARMSIZE
1360 x 600 x 1740SP 120 390 x 105 x 65 2.16 M³
OVERALLDIMENSIONS
W x D x H
170 Kg / 260 Kg1660 x 900 x 1450
MAINWORK STATION
SIZE
1200 x 340 x 140 Ø 15 (0.5” BSP)150 Ltrs / Min
Ø 6 (0.25” BSP)4 Kg / hr
OPTIONALBUILT IN COMPRESSOR
MOTOR & BLOCK TANK CAP.
1.5 KW(2 HP)
25 Ltrs
NET WT / CRATED WTCRATED SIZE : W x D x H
CRATED VOLUME
ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
AIR CONNECTION
CONSUMPTION
STEAM CONNECTION
CONSUMPTION
CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.
S.S Work Station.Swivelling Sleeve Arm.S.S Spotting Guns.Steam Air Gun.Ecological Suction.Lighting Device.
Model : SP 120
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com
Washroom Trolley. 100 kg. Capacity.
Shelf Trolley. 100 kg. Capacity.
Mobile Table.
Stainless steel polished top. Formed out Stainless Steel Tubes and Bars. Electro treated. Fitted with 4 nos swivelling type ball bearing wheels.
Laundry Scrub Station with 2 Sinks.
Formed out of Stainless Steel Tubes & Bars. Electro treated.Foldable Front. Fitted with 4 Nos. Swivelling type ball bearing wheels.
Washroom Trolley. 50 kg. Capacity.
Formed out of Stainless Steel Tubes & Bars. Electro treated. Fitted with 3 nos Shelves & 4 nos Swivelling type ball bearing wheels.
Formed out of Stainless Steel Tubes & Bars. Electro treated.Fitted with 4 Nos. swivelling type ball bearing wheels.
Formed out of Stainless Steel Tubes & Bars. Electro treated. Fitted with 4 Nos. swivelling type ball bearing wheels.
Dry Linen Trolley. 50 kg. Capacity.
0.31M³
0.69M³
MODEL
DTR 50
HOLDING CAPACITY
DIMENSIONS W x D x H
50 Kg 850 x 650 x1680
CRATED SIZECRATED VOLUME
NET WEIGHT
CRATED WEIGHT
44 Kg 70 Kg
1900 x 1050 x 350
MODEL
WTR 50
HOLDING CAPACITY
DIMENSIONS W x D x H
50 Kg 850 x 650 x 800
NET WEIGHT
CRATED WEIGHT
26 Kg 40 Kg
1050 x 850 x 350
CRATED SIZECRATED VOLUME
0.69M³
MODEL
STR 100
HOLDING CAPACITY
DIMENSIONS W x D x H
100 Kg 850 x 650 x1680
CRATED SIZECRATED VOLUME
NET WEIGHT
CRATED WEIGHT
48 Kg 73 Kg
1900 x 1050 x 350
0.43M³
MODEL
TS 113
HOLDING CAPACITY
DIMENSIONS W x D x H
50 Kg 1130 x 720 x800
CRATED SIZE
CRATED VOLUME
NET WEIGHT
CRATED WEIGHT
36 Kg / 56 Kg 1330 x 920 x 400 / 0.49M³
1.93M³
MODEL
WTR 100
HOLDING CAPACITY
DIMENSIONS W x D x H
100 Kg 1300 x 850 x 850
NET WEIGHT
CRATED WEIGHT
45 Kg 70 Kg
1500 x 1050 x 350 0.55M³
CRATED SIZECRATED VOLUME
Stainless steel construction. Separate Sinks for wash and Rinse. Hot & Cold water Mixers with both Sinks. S.S. Scrubbing board & underneath Shelf.
MODEL
LSR 160
CONNECTIONS DIMENSIONS W x D x H
1600 x 550 x 900
CRATED SIZECRATED VOLUME
NET WEIGHT
CRATED WEIGHT
55 Kg 95 Kg
1900 x 850 x 1200Ø 15 Each(0.5” BSP Each)
HOT & COLD WATER
0.31M³
0.69 M³
0.69 M³
1.93M³
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Trolleys, Tables & Scrub Station.
Model : WTR 50 Model : WTR 100
Model : DTR 50 Model : STR 100
Model : TS 113 & TS 235 Model : LSR 160
TS 235 100 Kg 2350 x 880 x800 78 Kg / 120 Kg 2550 x 1080 x 400 / 1.1M³
Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com