WORKSURFACES - AISOiled Olivewood C Orange C Pecan Woodline C Red C Ribbonwood Ashen C Ribbonwood...

WORKSURFACES

September 2019 Price List

This page intentionally left blank.

3Electronic Libraries available at 2020.net and ProjectMatrix.com

Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Sep 2019© 2019, AIS, Inc.

TABLE OF CONTENTS

PRODUCT INFORMATIONUniversal Worksurfaces Statement of Line 5Universal Worksurface Finish Options 6Universal Worksurfaces Product Details 7Universal Worksurfaces Grommet Specifications 8

WorksurfacesRectangular Worksurfaces 10Rectangular Worksurfaces for Height Adjustable Tables 12System Specific Extended Rectangular Worksurfaces 13System Specific Bullpen Surfaces 14Rectilinear and Extended Rectilinear Corners 15Curvilinear Corners 16Cockpit Corners 17Extended Curvilinear Corners 18D-Tops and P-Tops 19System Specific Spanner Half Moons 20Rounds and 120° Corners 21Shelf Surfaces and Rectangular / Radius Transactions 22Grommet Hole Covers 23

WARRANTY & TERMS AND CONDITIONSFor Warranty & Terms and Conditions please visit:https://aiscmsprod.blob.core.windows.net/infocenter/AISTermsWarranty.pdf

UNIVERSAL WORKSURFACES

This page intentionally left blank



STATEMENT OF LINE2mm Edge Worksurfaces

WORKSURFACES2MM EDGE WORKSURFACES

Rectangular Worksurfaces Extended Rectangular WorksurfacesSystem Specific

Bullpen SurfacesSystem Specific

Standard Rectilinear Corners Type B Extended Rectilinear CornersLeft or Right Hand

Cockpit Corner ReturnsLeft or Right Hand

Extended Curvilinear CornersLeft or Right Hand

RoundsD-Top

Curvilinear Corners Type A Standard Curvilinear Corners Type B Cockpit Corner

P-TopLeft or Right Hand

Spanner Half MoonsSystem Specific

Standard 120° C, 90° L, 90° R Corner

Shelf Surface Rectangular Transaction Radius Transaction



Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Sep 2019

© 2019, AIS, Inc.

FINISH OPTIONSWorksurface Laminate Options

WORKSURFACE LAMINATE OPTIONSName GradeAbsolute Acajou AAimtoo Savatre ABlack ABrazilwood ACabinet Almond AChalk ACorporate Walnut ADark Rum Cherry AGrand Cherry ALeave Likatre ALinen ALooks Likatre AMidwest Maple ANightfall AParis White Potterware ARecon Oak AStorm ASummer Drops ATitanium EV ATrue White ATrytoo Savatre AAsian Night BAsian Sand BBeige Granite BCarbon EV BColombian Walnut BDesert Zephyr BFigured Mahogany BFonthill Pear BGreen Soapstone BGrey Mesh BGridlock in L.A. BHampton Walnut BKhaki Brown BLoden Zephyr BMadagascar BMahogany Clove B

WORKSURFACE LAMINATE OPTIONSName GradeMonticello Maple BNatural Tigris BPearl Soapstone BPewter Mesh BSatin Oxide BShadow BShadow Zephyr BSoft Gold Mesh BStreets of San Francisco BSunset BTungsten EV BWhite Spektrum BWhite Tigris BWindswept Pewter BYorkshire Cherry BBlue CEbony CBright White (Writable Surface) COiled Olivewood COrange CPecan Woodline CRed CRibbonwood Ashen CRibbonwood Ebony CRibbonwood Myriad CSatin Stainless CStrand Burnt CStrand Wenge CStrand Wheat CTwill Earthen CTwill Graphite CTwill Sarum CViolet CWarm White CYellow CZebrano C

Custom Edgeband Options

EDGEBAND OPTIONSName Color Code GradeAbsolute Acajou AA AAimtoo Savatre AS ABlack BK ABrazilwood BZ ACabinet Almond CA AChalk CK ACorporate Walnut CT ADark Rum Cherry DR ADark Tone DT AGrand Cherry GC AGrey Value 1 GV1 AInnertone HT ALeave Likatre LV A

EDGEBAND OPTIONSName Color Code GradeLight Tone LT ALooks Likatre LK AMedium Tone MT AMidwest Maple MM ANightfall NF ARecon Oak RC ASatin White / True White SW / TW AStorm ST ASummer Drops SD ATrytoo Savatre TS AWarm Brown 1 WB AWoodrose WR A

• A $450 net edge match fee will be assessed to custom match non-standard edgeband. • Minimum order size for any custom color is $75,000.00 list. Extended lead-time will apply.




Product Detail 1 2mm Edge Details

Product Detail 2 Worksurfaces for Height Adjustable Tables

2 mm edge banding (approximately 3/32”) is made of rigid, dent resistant PVC. Impregnated colors match panel trim colors and help to reduce visible scratches. Edges are rounded/beveled for comfort. 2mm edging is available on all worksurface shapes. All surfaces shown are 2mm unless noted otherwise.

Worksurfaces for Height Adjustable Tables require a 1” gap on all sides to prevent pinch points. When placing two Worksurfaces for Height Adjustable Tables side-by-side each worksurface requires the 1” gap resulting in a 2” gap between worksurfaces. See examples below.

PRODUCT DETAILSUniversal Worksurfaces Product Details

Laminate

Backer

2mm Edge

1/8" radius

1 1/16"

ParticleBoard




© 2019, AIS, Inc.

PRODUCT DETAILSUniversal Worksurfaces Grommet Specifications

RECTANGULAR GROMMET OPTIONSOption Location List

A No Grommets -

B Location 1 +38

C Location 2 +38

D Location 3 +38

E Locations 2 and 3 +76

F Locations 1, 2 and 3 +114

G Locations 1 and 2 +76

H Locations 1 and 3 +76

CORNER GROMMET OPTIONSOption Location List

A No Grommets -

B Location 1 (Default) -

C Location 1 and 2 +38

D Location 1 and 3 +38

E Locations 1, 2 and 3 +76

Applies to: Rectangulars, Extended Rectangulars, Cockpit Returns, 120° Returns Applies to: All Corners (Rectilinears, Curvilinears, Depth Transitions, Cockpit Corners, 120° Corners, 135° Corners, Corner Keyboards)

EXTENDED LEFT HAND CORNER GROMMET OPTIONSOption Location List

A No Grommets -




E Locations 1 and 3* +38


G Locations 1, 3 and 4* +76

EXTENDED RIGHT HAND CORNER GROMMET OPTIONSOption Location List

A No Grommets -




E Locations 1 and 3* +38


G Locations 1, 3 and 4* +76

*Available on 72” Wide only. *Available on 72” Wide only.

Applies to: All Extended Left Hand Corners (Rectilinears, Curvilinears, Depth Transitions, 120° Corners, 135° Corners). Excludes all Extended D-Tops.

Applies to: All Extended Right Hand Corners (Rectilinears, Curvilinears, Depth Transitions, 120° Corners, 135° Corners). Excludes all Extended D-Tops.

Notes

Grommet holes are 2 3/4” outside diameter with a 2 5/8” inside diameter (inside sleeve). Grommet covers are available in either grey or black and are included with grom-met options. Grommet covers may also be purchased separately.

3.5"3.5" Center

3.5"

12 3

3.5

3.5

3.5

2

3.5"

.5"

3.5"

3

1

"

3

"

"

3.5"3.5"

2

18"

3

3.5

3.5

"

1

4

3.5" "

3.5

"

3.5"3.5

3.5"

2

18 "

3

3.5"

.5"

. "

1

4

53

3 "




PRODUCT DETAILSGrommet Specifications

D-TOP GROMMET OPTIONSOption Location List

A No Grommets -

B Location 1 +38

C Location 2 +38

D Locations 1 and 2 +76

P-TOP GROMMET OPTIONSOption Location List

A No Grommets -

B Location 1 +38

C Location 2 +38

D Locations 1 and 2 +76

Applies to: D-Tops Applies to: P-Tops

Notes

Grommet holes are 2 3/4” outside diameter with a 2 5/8” inside diameter (inside sleeve). Grommet covers are available in either grey or black and are included with grom-met options. Grommet covers may also be purchased separately.

Center

. " 2 "

1 2

053

Center

. " 24"

1 2

53




© 2019, AIS, Inc.

WORKSURFACESRectangular Worksurfaces

18” DEEP RECTANGULAR WORKSURFACES

D W Model Number ListGrade C

Laminate18 18 W-WS1818 237 +21

18 24 W-WS1824 258 +21

18 30 W-WS1830 310 +28

18 36 W-WS1836 337 +28

18 42 W-WS1842 367 +30

18 48 W-WS1848 399 +33

18 54 W-WS1854 444 +41

18 60 W-WS1860 490 +41

18 66 W-WS1866 558 +46

18 72 W-WS1872 579 +51

18 78 W-WS1878 654 +58

18 84 W-WS1884 699 +58

18 90 W-WS1890 736 +68

18 96 W-WS1896 819 +68



Laminate24 24 W-WS2424 261 +21

24 30 W-WS2430 313 +25

24 36 W-WS2436 340 +28

24 42 W-WS2442 370 +30

24 48 W-WS2448 402 +33

24 54 W-WS2454 448 +41

24 60 W-WS2460 493 +41

24 66 W-WS2466 561 +46

24 72 W-WS2472 614 +51

24 78 W-WS2478 657 +54

24 84 W-WS2484 702 +58

24 90 W-WS2490 712 +68

24 96 W-WS2496 822 +68



Laminate36 24 W-WS3624 340 +28

36 30 W-WS3630 413 +34

36 36 W-WS3636 484 +40

36 42 W-WS3642 601 +50

36 48 W-WS3648 644 +53

36 54 W-WS3654 737 +61

36 60 W-WS3660 817 +68

36 66 W-WS3666 861 +72

36 72 W-WS3672 959 +80

36 78 W-WS3678 1,059 +88

36 84 W-WS3684 1,148 +96

36 90 W-WS3690 1.175 +99

36 96 W-WS3696 1,274 +99



Laminate30 24 W-WS3024 313 +25

30 30 W-WS3030 369 +30

30 36 W-WS3036 401 +34

30 42 W-WS3042 475 +39

30 48 W-WS3048 515 +42

30 54 W-WS3054 599 +50

30 60 W-WS3060 599 +50

30 66 W-WS3066 676 +56

30 72 W-WS3072 735 +61

30 78 W-WS3078 891 +69

30 84 W-WS3084 1,036 +87

30 90 W-WS3090 1,051 +96

30 96 W-WS3096 1,147 +96

Specify Notes

• Laminate Selection• Color Selection for 2mm Edge• Additional Grommet Locations (+38)• Grommet Cover Color (if applicable)

Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. It is highly recom-mened that a center support be used on all worksurfaces greater than 48” width. When spanning panel connections with a worksurface greater than 48” wide, an additional center cantilever is recommended for added support. Otherwise, a U-chan-nel is recommended for additional center worksurface support. It is not recommended that 36”, 42” and 48” deep worksur-faces be cantilevered to panels. If these size depths must be panel hung. it is highly recommended that an additional front support, such as a combination leg or full laminate support panel, also be specified.

Woodgrain Direction




WORKSURFACESRectangular Worksurfaces



Laminate42 24 W-WS4224 353 +30

42 30 W-WS4230 430 +39

42 36 W-WS4236 508 +50

42 42 W-WS4242 627 +52

42 48 W-WS4248 669 +57

42 54 W-WS4254 771 +63

42 60 W-WS4260 958 +67

42 66 W-WS4266 899 +68

42 72 W-WS4272 1,005 +77

42 84 W-WS4284 1,200 +96

42 90 W-WS4290 1,313 +99

42 96 W-WS4296 1,235 +99



Laminate48 24 W-WS4824 402 +33

48 30 W-WS4830 515 +42

48 36 W-WS4836 644 +53

48 42 W-WS4842 685 +57

48 48 W-WS4848 724 +60

48 54 W-WS4854 815 +68

48 60 W-WS4860 806 +67

48 66 W-WS4866 899 +75

48 72 W-WS4872 920 +77

48 84 W-WS4884 1,156 +97

48 90 W-WS4890 1,287 +99

48 96 W-WS4896 1,189 +99

Specify Notes


Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. It is highly recom-mened that a center support be used on all worksurfaces greater than 48” width. When spanning panel connections with a worksurface greater than 48” wide, an additional center cantilever is recommended for added support. Otherwise, a U-chan-nel is recommended for additional center worksurface support. It is not recommended that 36”, 42” and 48” deep worksur-faces be cantilevered to panels. If these size depths must be panel hung. it is highly recommended that an additional front support, such as a combination leg or full laminate support panel, also be specified.

Woodgrain Direction




© 2019, AIS, Inc.

WORKSURFACESRectangular Worksurfaces for Height Adjustable Tables

Specify Notes

• Laminate Selection• Color Selection for 2mm Edge

• Grommet Location• Color Selection for Grommet Cover

Rectangular Worksurfaces for Height Adjustable Tables have a 1 1/8” thickness. Height adjustable worksurface support base is specified separately. Grommet holes with covers are specified as options. These worksurfaces are for use with height adjust-able table bases only. Worksurfaces for Height Ad-justable Tables require a 1” gap around to prevent pinch points. See example in Product Details.

Woodgrain Direction

RECTANGULAR WORKSURFACES FOR HEIGHT ADJUSTABLE TABLESD1 W1 Model Number List23 46 W-WS2346 402

23 52 W-WS2352 466

23 58 W-WS2358 493

23 64 W-WS2364 561

23 70 W-WS2370 614

29 46 W-WS2946 515

29 52 W-WS2952 529

29 58 W-WS2958 599

29 64 W-WS2964 676

29 70 W-WS2970 735




Specify Notes


Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. Extended rectan-gulars are designed to compensate for the gap created when a panel is inserted into a panel run at a 3-way connection. Be sure to order worksurface that corresponds to the system you are specifying. It is highly recommended that a center support be used on all worksurfaces greater than 48” wide. When spanning panel connections with a worksurface greater than 48” wide, an additional center cantilever is recommended for added support. Otherwise a U-Channel is recommended for addi-tional center worksurface support.

MATRIX SYSTEM EXTENDED RECTANGULAR WORKSURFACE


Laminate24 27 1/4 W-WSE2424MX 282 +23

24 33 1/4 W-WSE2430MX 338 +28

24 39 1/4 W-WSE2436MX 367 +30

24 45 1/4 W-WSE2442MX 402 +33

24 51 1/4 W-WSE2448MX 437 +36

24 57 1/4 W-WSE2454MX 491 +41

24 63 1/4 W-WSE2460MX 537 +45

24 69 1/4 W-WSE2466MX 612 +51

24 75 1/4 W-WSE2472MX 667 +56

24 87 1/4 W-WSE2484MX 765 +64

30 27 1/4 W-WSE3024MX 377 +31

30 33 1/4 W-WSE3030MX 400 +33

30 39 1/4 W-WSE3036MX 444 +37

30 45 1/4 W-WSE3042MX 489 +41

30 51 1/4 W-WSE3048MX 527 +44

30 57 1/4 W-WSE3054MX 613 +51

30 63 1/4 W-WSE3060MX 652 +54

30 69 1/4 W-WSE3066MX 735 +62

30 75 1/4 W-WSE3072MX 798 +67

30 87 1/4 W-WSE3084MX 1,047 +88

MWALL AND DIVI SYSTEM EXTENDED RECTANGULAR WORKSURFACE


Laminate24 26 3/16 W-WSE2424MW 283 +23

24 32 3/16 W-WSE2430MW 340 +28

24 38 3/16 W-WSE2436MW 369 +30

24 44 3/16 W-WSE2442MW 404 +33

24 50 3/16 W-WSE2448MW 439 +36

24 56 3/16 W-WSE2454MW 493 +41

24 62 3/16 W-WSE2460MW 540 +45

24 68 3/16 W-WSE2466MW 615 +51

24 74 3/16 W-WSE2472MW 670 +56

24 86 3/16 W-WSE2484MW 769 +64

30 26 3/16 W-WSE3024MW 379 +31

30 32 3/16 W-WSE3030MW 402 +33

30 38 3/16 W-WSE3036MW 446 +37

30 44 3/16 W-WSE3042MW 491 +41

30 50 3/16 W-WSE3048MW 529 +44

30 56 3/16 W-WSE3054MW 616 +51

30 62 3/16 W-WSE3060MW 655 +54

30 68 3/16 W-WSE3066MW 738 +62

30 74 3/16 W-WSE3072MW 802 +67

30 86 3/16 W-WSE3084MW 1,053 +88

WORKSURFACESSystem Specific Extended Rectangular Worksurfaces

The following worksurface is designed for use with Matrix systems only: The following worksurface is designed for use with MWall/Divi systems only:

Woodgrain Direction Woodgrain Direction




© 2019, AIS, Inc.

DIVI BULLPEN SURFACES

D WNumber of

Panels Model Number ListGrade C

Laminate24 24 1/8 1 W-WSDV2424 280 +21

24 30 1/8 1 W-WSDV2430 330 +25

24 36 1/8 1 W-WSDV2436 359 +28

24 42 1/8 1 W-WSDV2442 389 +30

24 48 1/8 1 W-WSDV2448 420 +33

24 54 1/4 2 W-WSDV2454 513 +41

24 60 1/8 1 W-WSDV2460A 513 +41

24 60 1/4 2 W-WSDV2460B 513 +41

24 66 1/4 2 W-WSDV2466 580 +46

24 72 1/4 2 W-WSDV2472A 630 +51

24 72 3/8 3 W-WSDV2472B 630 +51

24 78 1/4 2 W-WSDV2478A 676 +54

24 78 3/8 3 W-WSDV2478B 676 +54

24 84 1/4 2 W-WSDV2484A 721 +58

24 84 3/8 3 W-WSDV2484B 721 +58

DIVI BULLPEN SURFACES

D WNumber of

Panels Model Number ListGrade C

Laminate30 24 1/8 1 W-WSDV3024 330 +25

30 30 1/8 1 W-WSDV3030 387 +30

30 36 1/8 1 W-WSDV3036 432 +34

30 42 1/8 1 W-WSDV3042 492 +39

30 48 1/8 1 W-WSDV3048 530 +42

30 54 1/4 2 W-WSDV3054 619 +42

30 60 1/8 1 W-WSDV3060A 619 +50

30 60 1/4 2 W-WSDV3060B 619 +50

30 66 1/4 2 W-WSDV3066 694 +58

30 72 1/4 2 W-WSDV3072A 755 +61

30 72 3/8 3 W-WSDV3072B 755 +61

30 78 1/4 2 W-WSDV3078A 911 +69

30 78 3/8 3 W-WSDV3078B 911 +69

30 84 1/4 2 W-WSDV3084A 1,055 +87

30 84 3/8 3 W-WSDV3084B 1,055 +87

Specify Notes


Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. Bullpen Rect-angular surfaces are designed to compensate for the gap created by natural panel creep for system specific (MWall or Divi) panels only. It is highly recommended that a center support be used on all workspaces greater than 48” wide. When spanning panel connections with a worksurface greater than 48” wide, an additional center cantilever is recommened for added sup-port. Otherwise a U-Channel is recommended for addtiional center worksurface support.

WORKSURFACESSystem Specific Bullpen Surfaces

The following worksurface is designed for use with Divi systems only: The following worksurface is designed for use with Divi systems only:





WORKSURFACESRectilinear and Extended Rectilinear Corners

STANDARD RECTILINEAR CORNER TYPE B

D1 W1 F Model Number ListGrade C

Laminate24 36 10.25 W-WSC2436B 542 +45

24 42 18.75 W-WSC2442B 652 +54

24 48 18.75 W-WSC2448 725 +60

30 42 10.25 W-WSC3042B 722 +60

30 48 18.75 W-WSC3048B 822 +69

Specify Notes


• Additional Grommet Locations (+38)

• Grommet Cover Color (if applicable)

Worksurface support hardware is specified separate-ly. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options.

EXTENDED RECTILINEAR LEFT HAND CORNERS

D1 W1 W2 F Model Number ListGrade C

Laminate24 36 42 17 W-WSCE244236 590 +50

24 36 48 17 W-WSCE244836 594 +51

24 36 60 17 W-WSCE246036 691 +59

24 36 72 17 W-WSCE247236 968 +83

24 42 48 21.25 W-WSCE244842 721 +61

24 42 60 21.25 W-WSCE246042 849 +72

24 42 72 21.25 W-WSCE247242 978 +83

24 48 60 21.25 W-WSCE246048 853 +73

24 48 72 21.25 W-WSCE247248 981 +84

EXTENDED RECTILINEAR RIGHT HAND CORNERS

D1 W1 W2 F Model Number ListGrade C

Laminate24 36 42 17 W-WSCE243642 590 +50

24 36 48 17 W-WSCE243648 594 +51

24 36 60 17 W-WSCE243660 691 +59

24 36 72 17 W-WSCE243672 968 +83

24 42 48 21.25 W-WSCE244248 721 +61

24 42 60 21.25 W-WSCE244260 849 +72

24 42 72 21.25 W-WSCE244272 978 +83

24 48 60 21.25 W-WSCE244860 853 +73

24 48 72 21.25 W-WSCE244872 981 +84

Specify Notes


Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options.

Woo

dgra

in D

irection

F

Woodgrain Direction

F

Woodgrain Direction

F




© 2019, AIS, Inc.

Specify Notes



WORKSURFACESCurvilinear Corners

CURVILINEAR CORNER TYPE A

D1 W1 Model Number ListGrade C

Laminate24 36 W-WSCC2436 567 +47

30 42 W-WSCC3042 754 +63

STANDARD CURVILINEAR CORNER TYPE B



24 48 W-WSCC2448 757 +64

30 48 W-WSCC3048 863 +72

Woo

dgra

in D

irection

Radius12”

Woo

dgra

in D

irection

Radius12”




LEFT HAND COCKPIT CORNER RETURNS

D1 D2 W1 Model Number ListGrade C

Laminate24 30 36 W-WSCRL36 611 +54

24 30 42 W-WSCRL42 670 +60

24 30 48 W-WSCRL48 734 +66

24 30 60 W-WSCRL60 797 +71

24 30 66 W-WSCRL66 861 +77

24 30 72 W-WSCRL72 920 +83

24 30 84 W-WSCRL84 984 +88

24 30 96 W-WSCRL96 1,047 +94

COCKPIT CORNER



RIGHT HAND COCKPIT CORNER RETURNS


Laminate24 30 36 W-WSCRR36 611 +54

24 30 42 W-WSCRR42 670 +60

24 30 48 W-WSCRR48 734 +66

24 30 60 W-WSCRR60 797 +71

24 30 66 W-WSCRR66 861 +77

24 30 72 W-WSCRR72 920 +83

24 30 84 W-WSCRR84 984 +88

24 30 96 W-WSCRR96 1,047 +94

Specify Notes



WORKSURFACESCockpit Corners

Radius24”


Radius24”

Woo

dgra

in D

irection

Radius24”




© 2019, AIS, Inc.

WORKSURFACESExtended Curvilinear Corners

EXTENDED CURVILINEAR LEFT HAND CORNER

D1 W1 W2 Model Number ListGrade C

Laminate24 36 42 W-WSCCE244236 620 +53

24 36 48 W-WSCCE244836 623 +53

24 36 60 W-WSCCE246036 729 +62

24 36 72 W-WSCCE247236 1,019 +87

24 42 48 W-WSCCE244842 755 +64

24 42 60 W-WSCCE246042 889 +76

24 42 72 W-WSCCE247242 1,023 +87

24 48 60 W-WSCCE246048 897 +76

24 48 72 W-WSCCE247248 1,028 +88

EXTENDED CURVILINEAR RIGHT HAND CORNER

D1 W1 W2 Model Number ListGrade C

Laminate24 36 42 W-WSCCE243642 620 +53

24 36 48 W-WSCCE243648 623 +53

24 36 60 W-WSCCE243660 729 +62

24 36 72 W-WSCCE243672 1,019 +87

24 42 48 W-WSCCE244248 755 +64

24 42 60 W-WSCCE244260 889 +76

24 42 72 W-WSCCE244272 1,023 +87

24 48 60 W-WSCCE244860 897 +76

24 48 72 W-WSCCE244872 1,028 +88

Specify Notes



Woodgrain Direction

Radius12”

Woodgrain Direction

Radius12”




WORKSURFACESD-Tops and P-Tops

D-TOPS


Laminate24 60 W-WSD2460 616 +51

24 66 W-WSD2466 643 +54

24 72 W-WSD2472 691 +58

24 84 W-WSD2484 801 +67

30 60 W-WSD3060 632 +53

30 66 W-WSD3066 691 +58

30 72 W-WSD3072 752 +63

30 84 W-WSD3084 865 +70

P-TOPS

Hand D1 D2 W1 Model Number ListGrade C

LaminateLeft 30 36 60 W-WSPL3060 806 +67

Left 30 36 66 W-WSPL3066 867 +72

Left 30 36 72 W-WSPL3072 925 +78

Left 30 36 84 W-WSPL3084 1,084 +91

Right 30 36 60 W-WSPR3060 806 +67

Right 30 36 66 W-WSPR3066 867 +72

Right 30 36 72 W-WSPR3072 925 +78

Right 30 36 84 W-WSPR3084 1,084 +91

Left Hand P-Top Right Hand P-Top

Specify Notes


Worksurface support hardware is specified separately. Grommet holes with covers are specified as options.

Woodgrain Direction

Radius18”

Woodgrain Direction

Radius18”

Woodgrain Direction

Radius12”




© 2019, AIS, Inc.

WORKSURFACESSystem Specific Spanner Half Moons

DIVI SPANNER HALF MOONS


Laminate24 25 1/8 50 1/8 W-WSHM2450DV 577 +48

30 31 1/8 61 3/4 W-WSHM3062DV 617 +51

The following worksurface is designed for use with Divi systems only:

Woodgrain Direction

Specify Notes


Worksurface support hardware is specified separate-ly. Be sure to order worksurface which corresponds to the system you are specifying.




WORKSURFACESRounds and 120° Corners

ROUNDS

W1 Model Number ListGrade C

LaminateSwing Hole

30 C-TBLR30 457 +39 +38

36 C-TBLR36 655 +56 +38

42 C-TBLR42 781 +67 +38

48 C-TBLR48 819 +70 +38

Woodgrain Direction

120° C, 90° L, 90° R CORNER


Laminate24 36 W-WSYCC2436 567 +47

24 42 W-WSYCC2442 685 +58

24 48 W-WSYCC2448 757 +64

30 42 W-WSYCC3042 754 +63

30 48 W-WSYCC3048 863 +72

Specify Notes


• Additional Grommet Locations (+38)

• Grommet Cover Color

Worksurface support hardware is specified separate-ly. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options.

Radius18”

120°

90°90° Woodgrain Direction

Specify Notes


Worksurface support hardware is specified separate-ly. Be sure to order worksurface which corresponds to the system you are specifying.




© 2019, AIS, Inc.

WORKSURFACESShelf Surfaces and Rectangular / Radius Transactions

SHELF SURFACE


Laminate12 24 W-CT1224 195 +17

12 30 W-CT1230 211 +18

12 36 W-CT1236 227 +19

12 42 W-CT1242 233 +20

12 48 W-CT1248 239 +21

12 54 W-CT1254 278 +24

12 60 W-CT1260 282 +24

12 66 W-CT1266 296 +27

12 72 W-CT1272 316 +27

12 78 W-CT1278 322 +28

12 84 W-CT1284 326 +28

12 90 W-CT1290 333 +29

12 96 W-CT1296 339 +29

RECTANGULAR TRANSACTION


Laminate15 24 W-CT1524 205 +17

15 30 W-CT1530 223 +18

15 36 W-CT1536 236 +19

15 42 W-CT1542 244 +20

15 48 W-CT1548 254 +21

15 54 W-CT1554 290 +24

15 60 W-CT1560 294 +24

15 66 W-CT1566 331 +27

15 72 W-CT1572 331 +27

15 84 W-CT1584 343 +28

15 96 W-CT1596 355 +29

RADIUS TRANSACTION


Laminate15 31.5 W-CT1524R 269 +17

15 37.5 W-CT1530R 285 +18

15 43.5 W-CT1536R 298 +19

15 49.5 W-CT1542R 311 +20

15 55.5 W-CT1548R 317 +21

15 61.5 W-CT1554R 353 +24

15 67.5 W-CT1560R 359 +24

15 73.5 W-CT1566R 394 +27

15 79.5 W-CT1572R 394 +27

15 91.5 W-CT1584R 406 +28

Specify Notes


Worksurface support hardware is specified separately.


Woodgrain Direction




WORKSURFACESGrommet Hole Covers

GROMMET HOLE COVERSColor Model Number ListBlack W-GRC3B 26

Grey W-GRC3GV1 26

White W-GRC3W 26

Specify Notes

• Color Selection Grommet Hole Covers for cord management may be specified when ordering worksurfaces. Grommet covers are included when worksurfaces are ordered with grommets. Order separately only if extra covers are required or if retrofitting grommets in the field. Grommet holes required are 2 3/4” outside diameter with a 2 5/8” inside diameter (inside sleeve). Grom-met covers are available in grey, black and white.


National Showrooms:

LeominsterAIS Headquarters25 Tucker DriveLeominster, MA 01453

For additional information on AIS:Dealer Showrooms, Representative Directory, Project Case Studies, Online Catalog & Product Showcase Visit: www.ais-inc.com

New YorkAIS New York257 Park Avenue SouthNew York, New York 10010

Washington, D.C.AIS Washington, D.C.1400 Eye St, NW, Suite 750Washington, D.C. 20005

ChicagoThe Merchandise MartSuite 1086Chicago, Illinois 60654

GSA SalesGSA Contract GS-29F-0006KFSC Group 71, Part 1 Office Furniture

800.434.7400 | 978.562.7500 | Fax: 978.562.0811 | www.ais-inc.com | September 2019

PRODUCT INFORMATIONUniversal Worksurfaces Statement of LineUniversal Worksurface Finish OptionsUniversal Worksurfaces Product DetailsUniversal Worksurfaces Grommet Specifications

WorksurfacesRectangular WorksurfacesRectangular Worksurfaces for Height Adjustable TablesSystem Specific Extended Rectangular WorksurfacesSystem Specific Bullpen SurfacesRectilinear and Extended Rectilinear CornersCurvilinear CornersCockpit CornersExtended Curvilinear CornersD-Tops and P-TopsSystem Specific Spanner Half MoonsRounds and 120° CornersShelf Surfaces and Rectangular / Radius TransactionsGrommet Hole Covers

WORKSURFACES - AISOiled Olivewood C Orange C Pecan Woodline C Red C Ribbonwood Ashen C Ribbonwood...

Documents

Transcript of WORKSURFACES - AISOiled Olivewood C Orange C Pecan Woodline C Red C Ribbonwood Ashen C Ribbonwood...