PROGRAMME OBJECTIVE

CFD has become widely used in many industry

sectors. Engineers and academicians should learn the

strength and limitations of numerical techniques in order to

gain maximum from limited resources. It is also important to

know how to interpret the results in order to avoid common

pitfalls.

This one day workshop on computational fluid

dynamics covers both basic and advanced levels of CFD and

its influence on heat transfer and fluid flow analysis. The

program is intended to deliver the best practices in

academics and industries.

Discussions are entertained and emphasis is laid on

the theoretical background. The course is completely code

independent, and the training program will cultivate the

interest in writing own or customized CFD codes from pre

processing, grid generation to post processing the results.

TOPICS TO BE COVERED

Basic concepts of CFD Governing Equation for fluid flow and heat transfer

analysis Hands on training on CFD Modeling, grid generation

and Post processing for basic fluid flow and heat transfer applications

SPEAKERS

The resource persons will be from leading academic

institutes such as Vellore Institute of Technology and PSG

College of Technology.

ELIGIBILITY

Faculty of Engineering and Polytechnic Colleges

and Practicing Engineers in Industries and R & D

Organizations.

Registration Fee: Rs. 300/- per participant.

The duly filled registration form along with a Demand Draft

drawn in favour of The Principal, PSG College of

Technology payable at Coimbatore.

ABOUT THE COLLEGE

PSG College of Technology, started in the year

1951, is an autonomous college for the past 25 years,

offering 22 undergraduate programmes, 37 postgraduate

programmes and Ph.D., programmes in all departments.

Several advanced centers are set up with financial support

from the MHRD, DST and other agencies. These include: the

CAD/CAM/CIM Centre, Virtual Reality Centre, Centre for

Non-Formal and Continuing Education, Project Impact

Centre, TIFACCORE, Rapid Prototyping and Manufacturing

Centre and CII TDB TNET Centre.

ABOUT TEQIP

Technical Education Quality Improvement

Programme of Government of India (TEQIP) is being

implemented as a World Bank assisted Project to improve the

quality of technical education system in the country.

TEQIP has the following Objectives:

Promotion of Academic Excellence

Networking of Institutions for quality enhancement and

resource sharing

Enhancing quality and reach of services to Community

and Economy

System Management Capacity Improvement

ABOUT THE DEPARTMENT

The Department of Automobile Engineering has

evolved a comprehensive student-centric learning approach,

designed to add significant value to the learner understands

in an integrated manner through workshops, lab sessions,

assignments, seminars, internships and projects. The

department also offers PG and Doctoral programmes. The

department is well equipped with laboratories and offers

consultancy in chassis design, engine testing, finite element

analysis and computational fluid dynamics. Faculty members

are continually publishing paper in journals and conferences

at international and national levels. The department is

engaged in a lot of research work sponsored from funding

agencies including AICTE, UGC and DST, EPSRC, INDO-

MEXICO Joint Research Bi-lateral Programme.

TEQIP II SPONSORED WORKSHOP ON

CFD FOR HEAT TRANSFER AND FLUID

FLOW ANALYSIS

14.06.2014

APPLICATION FORM Name (in Block Letters) : .......................... DOB:: Male/Female: ....... Designation: .... Department: .... Organization: Address for Communication: .. .... .... Office phone: .....Mobile:. ... E-mail ID: ..... Category: OC/BC/MBC/SC/SCA/ST Demand Draft No & Date: Bank :

Amount : Rs. 300 /- DECLARATION BY THE CANDIDATE The given information is true to the best of my knowledge. I agree to abide by the rules and regulations governing the programme. If selected, I shall attend the course for the entire duration. Place : Date : Signature of the candidate

Sponsorship

Mr./Ms./Dr.____________________________________ is an employee of our Institution / Industry and is hereby sponsored. He/she will be permitted to attend the workshop, if selected. Office Seal Signature of the Sponsoring Authority Place: Date :

The details of this TEQIP II Sponsored Workshop are available in the website http://www.psgtech.edu.

The applicant may also submit advance application as an attachment file through the following e-mail address: psgnationalworkshop@gmail.com.

The applicant can know the information regarding selection and programme schedule by visiting the above website.

DATES TO REMEMBER Last date for the receipt of application : 04 Jun 2014 Date of intimation regarding selection : 07 Jun 2014 Confirmation by participants : 11 Jun 2014 The duly sponsored application form is to be sent to: Mr. MAGESH KANNAN V

Assistant Professor Department of Automobile Engineering PSG College of Technology, Peelamedu Coimbatore 641 004, Tamil Nadu Contact No: +91 9865050507

ORGANISING COMMITTEE

Patron Dr. R. Rudramoorthy Principal, PSGCT

Chairman Dr. S. Neelakrishnan Professor & Head Automobile Engineering

Coordinators

Dr. P. Karthikeyan Associate Professor Automobile Engineering

Mrs. D. Rekha Assistant Professor (Sr.Gr.) Automobile Engineering

Mr. M. Karthikeyan

Assistant Professor Automobile Engineering

Mr. Magesh Kannan V Assistant Professor Automobile Engineering

TEQIP II SPONSORED WORKSHOP ON

CFD FOR HEAT TRANSFER AND FLUID

FLOW ANALYSIS

14.06.2014

Coordinators Dr. P. Karthikeyan

Mrs. D. Rekha Mr. M. Karthikeyan

Mr. V. Magesh Kannan

Organized by

Department of Automobile Engineering

PSG College of Technology

Peelamedu, Coimbatore 641 004

Phone: 0422-2572177, 2572477 Fax: 0422-2573833 http://www.psgtech.edu