Central Power Research Institute(Govt. of India Society, Ministry of Power)

Prof. Sir. C.V. Raman Road, P.B. No.8066, Bangalore - 560 080, Karnataka, Indiawww.cpri.in

C P R I

WORKSHOP ON TRENDS INSUBSTATION AUTOMATION - IEC 61850

01 - 03 December, 2014

This programme is organised by inviting Mr.Christoph Brunner, an authority in the subject and other eminent speakers. Details are available inside this brochure…

ABOUT CPRICentral Power Research Institute(CPRI) was set up in 1960 by the Government of India to function as a National organization for applied research in power sector and to serve as an independent body for the testing and certification of power equipment. It is a premier research and testing institute in the field of power sector meeting the expectations of industries and the Nation. CPRI laboratories have modern testing equipment to meet the testing requirements as per National and International standards. CPRI also provides consultancy services on various needs of power sector. It has been extending its services for over five decades to the power sector in its quest for innovation, new product development, quality assurance etc. CPRI is accredited by many International bodies and test reports issued by CPRI are accepted at worldwide. CPRI is member in UCA IUG (Utility Communication Architecture International User Group), USA, DLMS UA, Geneva and others. CPRI has a vast experience and expertise in the areas of material characterization, simulation, diagnostic, calibration, system analysis and several other areas. The Head Office and the main set-up of the institute is at Bangalore and our units are at Bhopal, Hyderabad, Nagpur, Noida, Guwahati and Kolkata.

ABOUT POWER SYSTEMS DIVISIONPower Systems Division, CPRI is engaged in automation activities for about a decade. The division has established laboratories for Relays and Substation Automation. The Substation Automation lab is equipped with the facility for Conformance Testing of IEC 61850 server devices. The test facility is accredited by UCA IUG as Level ‘A’ (Independent Test Lab with certified ISO 9000 or ISO 17025 Quality Systems). Certificates issued by CPRI for IEC 61850 conformances are accepted worldwide. This division also undertakes consultancy on SCADA, DAS, Smart Grid, Protection Audit, Power System Studies, etc.

EVOLUTION OF SUBSTATION AUTOMATION SYSTEM

The evolution of SAS rests on the strong technological development of large-scale integrated circuits, leading to the present availability of advanced, fast, and powerful microprocessors. The result was an evolution of substation secondary equipment, from electro-mechanical devices to digital devices. This in turn provided the possibility of implementing SAS using several Intelligent Electronic Devices (IEDs) to perform the required functions (protection, local and remote monitoring and control, etc.). Substation automation is essential in order to maintain an efficient and reliable electrical Infrastructure.

NEED FOR IEC 61850 STANDARD

As a consequence of SAS, the need arose for efficient communication among the IEDs, especially for a standard protocol. Specific proprietary communication protocols developed by each manufacturer had been used, requiring complicated and costly protocol converters when communicating with IEDs of different make.

The experiences had demonstrated the need and the opportunity for developing and using standard communication protocols, which would support interoperability of IEDs from different manufacturers, in an unified communication environment.

ABOUT THE PROGRAMME

CPRI is a leading provider imparting training and continuing education to the personnel of utilities and industries in the power sector. In this context, a three days workshop on “IEC 61850 in Substation Automation” is organised inviting International speakers and experts in the subject. This workshop is meant to disseminate the knowledge and experience in the field of Substation Automation and IEC 61850 protocol. The programme consists of lectures by experts followed by demonstrations, discussions and visit to the testing laboratories.

ABOUT THE SPEAKERS:

Most of the topics from Introduction to the in-depth of the Standard will be covered by Mr.Christoph Brunner during Day 1 & 2. Also, there will be other topics including the utility experience, Manufacturers experience and testing related topics covered by eminent speakers from the utility, manufacturer and CPRI officials.

Mr. Christoph Josef Brunner: He graduated as an electrical engineer at the Swiss Federal Institute of Technology in 1983. An Utility-Industry professional with over 25 years of industry experience with both knowledge across several areas within the Utility and of technologies from the Automation Industry. He is president of it4power in Switzerland, a consulting company to the power industry. He has worked as a project manager at ABB Switzerland Ltd., in the business area Power Technology Products in Zurich, Switzerland where he was responsible for the process close communication architecture of the substation automation system. He is convenor of the working group (WG) 10 of the IEC TC57 and member of WG 17, 18 and 19 of IEC TC57. He is IEEE Fellow, member of

IEEE-PES and IEEE-SA. He is active in several working groups of the IEEE-PSRC (Power Engineering Society – Relay Committee) and member of the PSRC main committee and the subcommittee. He is International advisor to the board of the UCA international users group.

TOPICS

A Refresh on IEC 61850 ● IEC 61850 Fundamentals - Data Models - Communication Concepts ● Extending the scope of IEC 61850 - IEC 61850 related standardization activities - Ed 2 of IEC 61850 Application Modelling in IEC 61850 ● Application Modelling for Substation Automation ● Advanced Modelling Concepts - Hierarchy of Logical Devices - Namespaces – Extension of the data model - Inputs and blocking references - Monitoring and supervision of data - Diagnostic support - Statistic and historical calculation ● Testing an IEC 61850 based application - New testing features of Edition 2 - Applying the new testing features to a practical use case Conceptual Design Exercise ● Modelling, ACSI and communication ● Design and explore the use case of operating switchgear - HTML version of the standard - Data models - Issuing commands through GOOSE and control services - Reporting–configuration - Control – services - GOOSE–configuration

Engineering and Design ● SpecificationandDesignofaSAsystem - Specification - Project realization - Understanding the challenges of interoperability ● Engineering Process with IEC 61850 - UnderstandingthevariousSCLfiletypes - Roles of tools - Vendor independent design - Naming of devices and variables ● SystemConfigurationSupport - ObjectmodelandcontentofSCLfiles - Planned Ed 2 extensions for function modelling ● Design of the Communication Network - IEC 61850-90-4 Building the Smart Grid with IEC 61850 ● DER Grid Integration - Modelling of DER in IEC 61850 - Integrating DER in transmission and distribution management system ● IEC 61850 for DA ● Communication between substations using IEC 61850 ● Transmission of Synchrophasor information with IEC 61850Utility Implementations and their experienceConformance Testing as per UCA IUG test procedures.Demo of Conformance testing

WHO SHOULD ATTEND?This programme is designed for utility engineers, manufactures, researchers, consultants, system integrators, academia etc. As the seats are limited, registration will be on first cum first serve basis.

DATE AND VENUEThe workshop will be held on 01-03 December, 2014 (Monday to Wednesday) at CPRI, Bangalore.

SPONSORSHIP OPPORTUNITIESThere is an opportunity for the sponsors to promote their product/services to the focused audience besides providing opportunity for networking with the stakeholders and utilities. Manufacturers, Integrators, Service Providers, Consultants etc., can showcase their technologies, products and services during the workshop. We invite stakeholders to make use of this opportunity during this event to enhance their business opportunities by way of sponsorship. The details of the Sponsorship fee and privileges are as follows…

Gold Sponsor Rs.3,00,000 Silver Sponsor Rs.2,00,000• Company logo at the Workshop venue and at the

Registration counter.• One Exhibition Space for display of products and

services.• Company logo in the proceedings/ CD label and

banners.• Distribution of product brochure with kits to delegates.• Display of company logo in conference website with

hyper link to the sponsors website.• Company logo on the programme sheet.• 5 complementary delegates for participation in the

conference.• 10 numbers of conference CDs.• Post-conference participants list.• Complimentary exhibition staff passes 2 Nos.• Display of Sponsor logo at lunch, tea & buffet

area.

• Company logo at the Workshop venue.• One Exhibition Space for display of products and

services.• Distribution of product brochure with kits to delegates.• Display of company logo in conference website. • 3 complementary delegates for participation in the

conference.• 5 numbers of conference CDs.• Complimentary one exhibition staff pass.

REGISTRATION AND FEESThe registration fee for this 3 day workshop is Rs.15,000 plus service tax at 12.36% (Rs.16,854). Payment shall be made in advance by the way of DD drawn in favour of “Senior Accounts Officer, CPRI, Bangalore”, payable at Bangalore. As the seats are limited, registration will be on first come first serve basis.

Discounts:● A discount of 10% will be offered for a group of three participants and 20% for a group of four or more

participants attending from the same organisation.

● For practicing Utility Engineers and Faculty members from Educational Institutes 30% discount on the registration fee is applicable.

● Students from educational Institutes will be offered 50% discount on the registration fee.

The registration fee includes delegate kit with course material, tea/coffee, snacks and lunch during the workshop.

Registration form, complete in all respect shall be sent to the programme coordinator along with the registration fee. Kindly use separate form for each participant, downloaded/photo copy of registration form is acceptable.

TRAVEL AND ACCOMMODATIONThis is a non-residential programme, participants may make their own arrangements for travel and accommodation. However, accommodation upon request can be arranged at CPRI on payment basis subject to availability.

CPRI is about 32KM from the Kempegowda International Airport, Bangalore and around 8 KM from the Bangalore City Railway station and City Bus Station.

Details about reaching CPRI is available at http://www.cpri.in/route-map.html

For details please contact:Organising Secretary

Mr. Pradish. MSmart Power & Energy System

Power Systems DivisionCentral Power Research Institute

Prof. Sir C V Raman Road, PO Box 8066, Sadashivanagar PO, Bangalore - 560 080, INDIAEmail: pradish@cpri.in Mobile:+91-9448722416 Fax: +91-80-23601213

Kindly visit www.cpri.in/events for any updates...

CENTRAL POWER RESEARCH INSTITUTE

PROF. SIR. CV RAMAN ROAD, PO BOX 8066,

SADASHIVANAGAR SUB PO, BANGALORE – 560 080

REGISTRATION FORM

WORKSHOP ON TRENDS IN SUBSTATION AUTOMATION – IEC 61850

VENUE: CPRI, Bangalore DATES: 01-03 December, 2014 www.cpri.in

Mr. Ms. Mrs. Dr. Prof. Others(Please Specify)___________________________

Full Name of the Participant

Designation Nationality

Full address of Organization_____________________________________________________________ (For Correspondence)

Country: ZIP/PIN Code: Phone/Fax Nos.: (Please Mention Country & STD Code)

Office:___________________________________________________________________________

Fax: ________________________________ Mobile/Cell: __________________________________

E-mail :___________________________________________________________________________

Present area of Responsibility:

Enclosed is a Demand Draft No:____________dated_________for Rs.________ drawn on

____________________________ bank towards delegate fee drawn in favor of “Accounts Officer, CPRI”

payable at “ Bangalore”.

Date: _______________ Signature:

Note: Kindly mention your Name, Name of the Company and Name of the conference behind the Demand Draft

I/We came to know about this conference through____________________________________________

If you feel that this conference is of interest to your peers from your organization or other organisations, it is requested to inform their contact details below and we will be more than happy to contact them.

Sponsors, Company nominations and individuals shall give full details of all the participants in this format.

CANCELLATIONS & SUBSTITUTIONS: Request for cancellations must be received in writing, 7 working days before the conference to get refund, with deduction of Rs.1000/- per delegate as handling charges. If the fee has been paid in full, substitutions can be made with prior intimation at no extra

cost. In case this event is cancelled, full refund will be made. CPRI reserves the right to postpone or cancel this event.

Kindly use separate form for each participant, downloaded / photocopies of this registration form is acceptable.

KINDLY VISIT CPRI WEBSITE FOR REGULAR UPDATES

Completely filled forms & DD shall be sent to:

Mr.Pradish. M Organising Secretary, Workshop on Trends in Substation Automation – IEC 61850 SP&ES - PSD, Central Power Research Institute, Prof. Sir C V Raman Road, PO Box 8066, Sadashivanagar Sub PO, Bangalore – 560080. INDIA Mobile: +91-9448722416 Fax:+91-80-23601213 E-mail:pradish@cpri.in