WORKING WITH MACROS CHAPTER 10 WORKING WITH MACROS.
-
Upload
homer-chapman -
Category
Documents
-
view
264 -
download
7
Transcript of WORKING WITH MACROS CHAPTER 10 WORKING WITH MACROS.
CHAPTER 10WORKING WITH
MACROS
1. Introduction
A macro helps you perform routine tasks by automating them
Record a single macro that does the entire task all at once instead of manually performing a series of time-consuming, repetitive actions.
A macro is a set of one or more actions that perform a particular operation
2. Creating and Running a MacroSimple macros that automate a single
task, such as opening a form or report, are simple to create
Complicated macros with several steps or procedures require planing.
Before creating a complicated macro, identify what the macro will do and the individual actions that are required to complete this operation.
2. Creating and Running a MacroIn the database window, click the
macros icon in the objects bar and click the new button.
In action column, select the action you want the macro to perform.
Specify any required arguments for the action in the action arguments area.
Cick the save button on the toolbar
2. Creating and Running a Macro
2. Creating and Running a MacroClick the macros icon in the objects bar
and double-click the macro you want to run or click run button
3. Editing a Macro
Macros can contain many actions to automate even the most complicated tasks
Each action appears in its own row and is executed in the order in which it appears in the Macro window, from top to bottom.
To modify a macro:◦In the database window, click the
macros icon in the objects bar, select the macro you want to edit, and click the design button.
4. Working with Macro GroupsA macro group stores several related
macros together in a single macro objectTo create a macro group, give each
macro in the macro group its own unique name by entering the macro names in the Macro Name column (by clicking the Macro Names button on the toolbar).
When combine two or more macros within the same macro group, must run them separately, by referring to the macro group name, followed by the macro name
4. Working with Macro Groups
4. Working with Macro GroupsTo run a macro in a macro group:Select tools macro run macro from the
menu.Click the macro name list arrow, select
the macro you want to run, and click ok
5. Assigning a Macro to an Event
To assign a macro to a control on a form or report:
• Open the form or report in design view.• Click the control to which you want to
assign the macro and click the properties button on the toolbar.
5. Assigning a Macro to an Event• Click the event tab and click in the box
for the type of event you want to assign to the macro.
• Select the macro you want to assign to the event.
• Close the properties dialog box and save the form or report.
5. Assigning a Macro to an Event
Event Description
Before Update
Macro or function that runs when data in a field or record is changed but before the changes are actually saved to the database. Often used to validate data.
After Update
Macro or function that runs when data in a field or record is changed and is saved to the database.
5. Assigning a Macro to an Event
On Change
Macro or function that runs when the contents of a text box or combo box changes or when you move from one page to another page in a tab control.
On Enter
Macro or function that runs when a control first gets the focus. The Enter event occurs before the focus moves to a particular control. You can use an Enter macro or event procedure to display instructions when a form or report first opens.
On ExitMacro or function that runs when a control loses focus (is deselected) on the same form.
5. Assigning a Macro to an Event
On Got Focus
Macro or function that runs when a control gets the focus (is selected).
On Lost Focus
Macro or function that runs when a control loses the focus (is deselected).
On ClickMacro or function that runs when a control is clicked.
On Dbl Click
Macro or function that runs when a control is double-clicked.
5. Assigning a Macro to an EventOn Mouse Down
Macro or function that runs when the user presses the mouse button.
On Mouse Move
Macro or function that runs when the user moves the mouse over a control.
On Mouse Up
Macro or function that runs when the user releases the mouse button.
On Key Down
Macro or function that runs when the user presses a key on the keyboard.
On Key UpMacro or function that runs when the user releases a key on the keyboard.
On Key Press
Macro or function that runs when the user presses an ANSI key on the keyboard.
6. Creating Conditional ExpressionsThe macro condition states this
effectively: If this condition is true, run this action. If it is not true, go to the next action, if any.
Normally, a condition applies only to the action on the same row in the macro sheet. If the condition isn’t met, the next action is executed.
To continue the condition to the next action, enter an ellipsis (…) in the Condition column of the next row. You can apply the condition to several sequential actions
6. Creating Conditional Expressions
6. Creating Conditional ExpressionsTo add the Condition column to the
macro sheet, click the Conditions button or choose View | Conditions.
Type the logical expression for the condition in the row with the action you want to carry out if the condition is True.
If you want to use the Expression Builder to help with the expression, right-click in the Condition column and choose Build from the shortcut menu.
7. Some Common Uses for MacrosDisplaying a Message Box
MsgBoxdisplay warnings, alerts, and other information
Message Enter the text of the message you want displayed when the
Beep sound a beep signal when the message
Type Sets the type of message box, each of which displays a
Title Text that displays in the message box title bar
7. Some Common Uses for MacrosSetting Values and Properties
◦Set the value of a control based on the value of another control in the same or a different form or report
Many of the properties of forms, reports, and controls can be set by running a macro. For example, you can hide a control from view on the form or disable it so the user can’t enter data in it.
7. Some Common Uses for MacrosThe MsgBox function is similar to the MsgBox
action with the exception that the function returns one of seven different values, depending on which button the user clicks in the message box
The MsgBox function displays a dialog box containing the message and waits for the user to click a button indicating the user’s choice
The MsgBox function has three main arguments; only the first is required
7. Some Common Uses for Macros
◦Prompt is a string expression displayed in the dialog box.
◦Button is a number equal to the sum of three values that specify the visual characteristics of the message box
◦Title is a string expression displayed in the dialog box title bar
7. Some Common Uses for MacrosYou can also specify which of the buttons
is the defaultYou can also specify which of the buttons is the default
Value Buttons To Display:0 Display only the OK button.1 Display the OK and Cancel buttons.2 Display the Abort, Retry, and Ignore buttons.3 Display the Yes, No, and Cancel buttons.4 Display the Yes and No buttons.5 Display the Retry and Cancel buttons.
7. Some Common Uses for Macros
Icons To Display:
0 Display no icon.
16 Display the Critical Message icon.
32 Display the Warning Query icon.
48 Display the Warning Message icon.
64 Display the Information Message icon.
7. Some Common Uses for MacrosWhen you use the MsgBox function in a
macro condition, you can compare the returned value to a specific number and carry out the action if the comparison is True Button Returned Value
OK 1Cancel 2Abort 3Retry 4Ignore 5Yes 6No 7
8.Creating an AutoExec MacroYou can create a special macro that runs
when you first open a database. The AutoExec macro can carry out such actions as open a form for data entry, display a message box.
All you need to do is create the macro with the actions you want carried out at startup and save it with the name AutoExec. Adatabase can have only one macro named AutoExec
9. Macro Action Reference
(tự tham khảo)