Working Drawing Check List

8/13/2019 Working Drawing Check List

1/12

1

EKURHULENI METROPOLITAN MUNICIPALITYBUILDING DEVELOPMENT SECTION

WORKING DRAWING CHECK LIST

LIST DRAWINGS TO BE PROVIDED

Site plan

Floor plans

Foundation plan

Ceiling plan

Roof plan

Sewer and storm water layout plan

Sewer elevations

Electrical layout plan

Water layout plan

Elevations

SectionsConstruction details

Window and door details

Bathroom, Sluice room and Toilet layouts

Kitchen layouts

Shelving and cupboard details

Joinery details

Window schedule

Shop front schedule

Door schedule

Finishing scheduleSanitary schedule

Exterior specifications

GENERAL INFORMATION TO APPEAR ON ALL DRAWINGS

Title block

Consultants data (name, address and tel. nos)

Clients data

Project name

Project address and stand number

Project number

Drawing numberScales

Date

Drawn block

Approved block

Revisions column with date column

General instructions to contractor

North point (pointing upward)

Orientation block plan

Drawing title with scale adjacent

Module linesNo loose furniture, shading or colouring to appear on working drawings

Minimum height of text to be 2mm


2/12

2

SITE PLAN (Scale 1 in 500 or 1 in 200)

Drawing list

Boundary dimensions

Detailed stand description

Position and description of all adjoining sites

Adjoining streets and roads (Names and widths)

Adjoining sidewalks and kerbs (position and width)

Existing elements on sidewalks (Trees, electrical mini subs, poles, manholes, storm waterinlets etc.)

Servitudes (description and width)

Building line & distance to boundary

Footprint of all new buildings with names and floor levels

Bench mark (position, level and full description)

Setting out points and distances of new buildings to nearest site boundary lines andexisting buildings

New paved areas, walkways, aprons, etc. (Materials, dimensions, etc.)Existing buildings and paved areas (names and levels)

Refuse removal areas + levels

Parking layout with dimensions, radii, kerbs, finishes, parking bay numbers

Position, dimensions and description of entrance

Gates (width and description)

Boundary fences and walls (new and existing, description and height)

Free standing walls and fences on site (New and existing, height and description)

Fences and walls to be removed or demolished

Trenches to be filled

Roads and paving to be removedTemporary roads and fencing

All existing elements on site (Trees, electrical mini subs, poles, manholes, storm waterinlets etc.)

Contours (existing)

New ground levels (excavated and filled)

Level changes (embankments, stairs, ramps, berms, retaining walls, etc.show levelsand describe materials.)

All existing services on site (Sewer lines, electrical cables, manholes, storm water drains,water lines, telephone lines, poles, etc.)

Sewer layout with manholes, GL, IL and D, ies, ces, gullys, pipe sizes, falls etc.

Municipal sewer (Position, direction of fall, sewer connection)Storm water layout (manholes, inlets, catch pits, pipe sizes, materials, falls, levels,outlets, connections etc.)

Site water layout (Water connection, pipe sizes, position and description of fire hydrantsand garden taps)

New trees (description, and drip line circumference of tree in mature state)

Existing trees (Position, and drip line circumference )

Trees to be removed (Position and trunk diameter)


3/12


4/12

4

CEILING PLAN (Scale 1 in 100 and 1 in 50)

Wall thicknesses

Chimneys and service ducts

Lintels

Truss and rafter lines

Width and direction of gypsum and fibre cement ceilings

Grid lines for suspended ceilings

Ceiling hatchesdescription and size

Position of geyser

Ceiling specification

Ceiling details

Section lines

ROOF PLAN (Scale 1 in 100 1 in 50)

Position of walls

Position of gables and parapets

Position of chimneys and service ductsDimensions of overhangs

Directions of falls

Gutters

Rain water down pipes

Trusses, beams and purlins with centreline distances

Position of geyser

Position of flashings ridges and valleys

Description of roof structure

Description of isolation

Specification of roof coveringSpecification of water proofing

Section lines

Reference symbols to details

SEWER AND STORM WATER LAYOUT PLAN (Scales 1 in 100 1 in 50)

Description, position and direction of fall of Municipal sewer line

Description, position and depth of municipal sewer connection

Position of all sanitary appliances

Sewer Layout

Sewer line levels (ground level, invert level and depth)

All wastewater pipesSewer Pipe dimensions and description

Sewer falls

Ramp pipes

Position, size and levels of manholes

Ventilation pipes

Anti siphon pipes

Gullies

Grease traps

Cleaning eyes

Inspection eyesFrench drains

Septic tanks

Storm water layout


5/12

5

Storm water pipe dimensions and description

Storm water connection (position and depth)

Storm water levels

Catch pits (position, size and levels)

SEWER ELEVATIONS (Scales 1 in 100 1 in 50)

Description, position and direction of fall of Municipal sewer line

Description, position and depth of municipal sewer connection

Position of all sanitary appliances

Sewer Layout

Sewer line levels (ground level, invert level and depth)

All wastewater pipes

Sewer Pipe dimensions and description

Sewer falls

Ramp pipes

Position, size and levels of manholes

Ventilation pipes

Anti siphon pipesGullies

Grease traps

Cleaning eyes

Inspection eyes

French drains

Septic tanks

ELECTRICAL LAYOUT PLAN (Scale 1 in 100 1 in 50)

Symbols key diagram

Light points (for ordinary and waterproof fittings)Light points (fluorescent)

Light switches (single, two way and pull)

Power skirtings (position and description)

Power points (low and high with heights above finished floor level)

Stove connection

Geyser connection

Floor, wall and ceiling mounted heaters

Distribution and sub-distribution boards

Electrical connection point position of meter

Position of supply cable

Position of sleevesTelephone points and connection

Television points and position of arial

Door alarms and bells

Communication system

Site lighting

Time switches

Incinerator connections

Extraction fan connections

Shaving connections

Schedule of fittings


6/12

6

WATER LAYOUT PLAN (Scale 1 in 10 1 in 50)

Water meter and connection point (position and size)

Reticulation over site (pipe sizes)

Garden and other outside taps

Fire hydrants (position and size)

Swimming pool or fountain supply

Reticulation in building (pipe sizes)

Supply to reservoirs, tanks and pressure tanks

Supply to geyser

Reticulation of hot water from geyser

Fire hose reels (position and size)

Closing valves

Taps

Pressure reducing valves

One way valves

Pressure valves

ELEVATIONS (Scales 1 in 100 - 1 in 50)

Module lines

Natural ground level

Excavated ground level

Back filled ground level

Floor levels at level changes, stairs, ramps, inside and outside (top of concrete TOC)

Show height of floor above ground level

Lintel levels

Top of slab levels

Soffit of slab levelsTop of beam levels

Soffit of beam levels

Landing levels

Wall plate level

Foundation walls

Windows (indicate opening sections and show cills)

Lintels

Doors

Other openings and height references

Air bricks, grills and louvres

Thresholds, stairs and rampsPodiums, platforms berms, retaining walls, screen walls etc, (show and describe )

Verandas and pergolas

Roof finishes and flashings (describe)

Parapets and copings (describe)

Fascias and barge boards (show and describe)

Rainwater gutters and down pipes (show and describe)

Expansion joints

Wall finishes


7/12

7

SECTIONS (Scale 1 in 100 1 in 50 1 in 20))

Natural ground level

Excavated ground level

Back filled ground level

Floors with levels, inside and outside (top of concrete TOC)

Stairs and ramps

Show height of floor above ground levelShow height from FFL to underside of ceiling

Lintel levels

Top of slab levels

Soffit of slab levels

Top of beam levels

Soffit of beam levels

Landing levels

Wall plate level

Foundations (min 255 x 600mm)

Foundation walls (min 220 mm)Consolidated fill

Hardcore fill

Damp proof membrane (describe)

Concrete bed

Screed

Brick walls

Slabs and beams

Damp proof courses at floor and window cill level

Room names and numbers

Wall finishes

Tile lines and dado heights

Window and door openings

Thresholds

Sanitary ware in elevation (name)

Window cills (describe)

Door and window lintels (describe)

Wall plate (Size and description)

Beam filling

Ceiling (describe material, thickness, fixing and finish)

Ceiling brandering (describe material, spacing, size and fixing)

Roof insulationRoof truss (material, spacing, fixing and sizes of rafters, tie beams, struts and posts)

Purlins and battens (describe material, spacing, size and fixing

Flashings and counter flashings (describe)

Parapets and side walls (show vertical height above roof finish)

Copings (show and describe)

Flat roof water proofing (screed, waterproofing material, fixing and finishing)

Roof insulation (material, size and fixing)

Roof finish (material, size and fixing)

Rain water gutters and downpipes (material and sizes)

Sections through concrete beams, slabs, stairs and landingsReferrals to details and detailed sections

Hatching to SABS


8/12

8

CONSTRUCTION DETAILS (Scale 1 in 10 1 in 5)

Foundation and wall details showing fill, hardcore, dpm, bed, screed skirting and plaster

Cill details showing brickwork, outer cill, inner cill, dpc and plaster

Lintel details showing brickwork and plaster

Beam and slab details showing brickwork, screed, floor finish and plaster

Eaves details showing brandering, ceiling, cornice, wall plate, beam filling, rafters, purlins,battens, tilting batten, underlay, roof tiles/sheeting, fascia, gutter

Verge details showing rafters, purlins/battens, underlay, roof tiles/sheeting, barge board

Ridge details showing rafters, purlins/battens, underlay, roof tiles/sheeting, ridge tile,ridge flashing, serrated closers, sealing strips

Valley details showing rafters, purlins/battens, underlay, roof tiles/sheeting, valley gutter

Hip details showing rafters, purlins/battens, underlay, roof tiles/sheeting, hip tile

Top and side parapet details showing brickwork, rafters, purlins/battens, underlay, rooftiles/sheeting, flashing, counter flashing, serrated closers, sealers, concealed gutter

Box gutter details showing brickwork, timberwork and sheet metal work, dimensions

Stair details showing brickwork, concrete, plaster, screed, floor finish, balustrade with

handrail, bottom rail and stiles, dimensions of risers, treads and handrail

BATHROOM/SLUICE ROOM/TOILET LAYOUTS (Scale 1 in 20)

Detailed plans

Wall thicknesses

Plaster

Floor tile layout

Sanitary equipment in plan and to scale

Windows in plan with cills

Doors in plan with door swings and frames

Sewer and waste water pipes in plan and to scale

Position of mirrors in plan

Toilet roll holders, trowel rails, towel roll holders, electric hand driers, sanitary padutensils, soap holders, soap dispensers, disposal bins in plan

Horizontal dimensions

Section lines and arrows

Detailed sectional elevations

Wall thicknesses, plaster and ceiling lines

Windows in elevation

Doors in elevation

Wall tiles in elevationSanitary equipment in elevation and to scale

Sewer and waste pipes in elevation and to scale

Mirrors in elevation showing position and size

Toilet roll holders, towel roll holders, electric hand driers, sanitary pad utensils, soapdispensers, disposal bins in elevation

Vertical dimensions


9/12

9

KITCHEN LAYOUTS (Scale 1 in 20)

Detailed plans

Wall thicknesses

Plaster

Floor tile layout

Kitchen cupboards, stove, sink and fridge in plan and to scale

Kitchen cupboard codes



Sewer and waste water pipes in plan and to scale



Detailed sectional elevations



Doors in elevation

Wall tiles in elevationKitchen cupboards, stove, sink and fridge in elevation and to scale

Sewer and waste pipes in elevation and to scale

Kitchen cupboard codes

Kitchen cupboard specifications

Vertical dimensions

SHELVING LAYOUT (Scale 1 in 20)

Detailed plans of storage areas

Wall thicknesses

PlasterShelving in plan and to scale





Detailed sectional elevations of storage areas



Doors in elevation

Shelving in elevation and to scale

Shelving in section and to scaleVertical dimensions

Brackets, fixing details, etc

Shelving specification (material and finishes)

JOINERY DETAILS ( Scale 1 in 10 1 in 5 - 1 in 2)

Plans of joinery items

Elevations of joinery items

Large scale detail sections

Horizontal and vertical dimensions

Description of material, fixing methodsDescription of any ironmongery like handles, rails, drawer slides etc

Description of finishes


10/12

10

WINDOW SCHEDULE (Scale 1 in 50 1 in 20)

Reference number

Number of windows

Drawing - Indicating unfinished floor level, fixed and opening sections and swing

DimensionsIndicating window size and lintel height above TOC

Description - Indicating material, profile type and profile size of frame and burglar bars,gauze and fixed louvres

Ironmongery - Indicating handles, stays, hinges etc.

GlazingIndicating type and thickness of glass, fixing method and type of opacity

FinishesIndicating factory finish, undercoat, final coats and colour of paint

SHOP FRONT SCHEDULE (Scale 1 in 50 1 in 20)

Reference number

Number of shop front units

Elevation - Indicating FFL, fixed and opening sections and indicating swing

Sections and plans if needed

DimensionsIndicating all sizes and heightsDescriptionDescribing material, profile type and profile size of frames, doors andopening sections, position of opaque panels etc

Ironmongery - Indicating handles, stays, hinges, door closers etc

GlazingIndicating type and thickness of glass, fixing method and type of opacity

FinishesIndicating factory finish, undercoat, final coats and colour of finish

DOOR SCHEDULE (Scale 1 in 50 1 in 20)

Reference number

Number of doors indicating LH or RH door swings

ElevationShowing door frame, door, glazing, louvers, fanlights kick plates, TOC andFFL

Section and plan if needed

DimensionsIndicating size of frame, size of door, height above TOC, size of insets, kickplates, louvers, glazed panels, fanlights, size of bottom gap in toilet doors etc.

Description of frameDescribing material, type and size of profile, number of rebates,sidelights, fanlights, striking plate

Description of doorDescribing material, construction method, sizes of stiles, rails,braces, lock blocks, door thickness, weather bar, door leaves, veneer, cover strips,rebates, kick plates

GlazingIndicating type and thickness of glass in sidelights, fanlights, and glazed insetsin doors, method of fixing

IronmongeryDescribing locks and lock sets, door handles, hinges, door closers, slidingbolts, door stops, name plates, indicator bolts, signage, sliding rails, panic bolts, masterkeys, clothes hooks

Finish on frameIndicating factory finish, undercoat, top coats

Finish on doors - Indicating factory finish, undercoat, top coats


11/12

11

FINISHING SCHEDULE

Column indicating all rooms and interior spaces

Differentiate between floors and separate buildings

FloorsDescribe type of fill, hardcore, damp proof membrane, ant poisoning, concretebed, screed, floor finish, floor tiles, carpet, colour, skirtings

WallsDescribe one or two coat plaster, undercoat, paint coats, wall tiles, specialfinishes, colours, curtain rails

Window cillsDescribe materials and method of laying of inside and outside cills

CeilingsDescribe material, method of fixing, cover strips, cornices, insulation, finish,colours

SANITARY SCHEDULE

Column indicating all rooms and interior spaces

Differentiate between floors and separate buildings

Sinks - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipe sizes,stop cocks

Wash troughs - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipesizes, stop cocks

Wash hand basins - Name, catalogue no, size, material, fixing method, taps, traps, plugs,pipe sizes, stop cocks

Showers - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipesizes shower roses

Baths - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipe sizes ,stop cocks

Water closets - Name, catalogue no, size, material, fixing method, flush valves flushpipes, cisterns, direction of S bend, pipe sizes, stop cocks

Urinals - Name, catalogue no, size, material, fixing method, flush valves flush pipes,

cisterns, traps, pipe sizes, stop cocksBidets and squat pans - Name, catalogue no, size, material, fixing method, flush valvesflush pipes, cisterns, traps, pipe sizes, stop cocks

Laboratory sinks - Name, catalogue no, size, material, fixing method, taps, traps, plugs,pipe sizes, stop cocks

Sanitary pad bins and incinerators

Toilet roll holders

Soap dispensers

Towel roll holders

Mounted bins

Electrical hand driersMirrors

Soap holders

Clothes hooks


12/12

Working Drawing Check List

Documents

Transcript of Working Drawing Check List