Work report of Sarah Ourimi & Sonia Torkhani during March … · Sarah Ourimi & Sonia Torkhani...
-
Upload
duonghuong -
Category
Documents
-
view
213 -
download
0
Transcript of Work report of Sarah Ourimi & Sonia Torkhani during March … · Sarah Ourimi & Sonia Torkhani...
Work report of
Sarah Ourimi & Sonia Torkhani
during March 2015
Place: Energy Team S.p.a Trezzano sul Naviglio (Milan) Italy
PERIOD: from 2/03/2015 to 30/03/2015
1
Monday 2/03/2015
First day of work, first contact with the Energy Team staff. We did : 1- Energy Team familirazation. 2- Install in our desk. 3- A meeting with engineers and techniciens working on the project in order to share informations collected during our month of work in the embassy.
2
Tuesday 3/03/2015
Second day of work, familiarization with the products and services of Energy Team throught catalogs, website: 1-Softwares: ES Web, SEM and ES3 evo : http://www.energyteam.it/en/products/software/ 2-Hardwares: X-Meter, Efficiency Terminal and NG9: http://www.energyteam.it/en/products/multimeters-area-network-analyzers/
http://www.energyteam.it/en/
3
Wednesday 4/03/2015
1-We read the l’Efficiency Terminal manual and try to learn how to manipulate it. 2-Installation of the apparatus in electrical board.
4
Monday 9/03/2015 1- Decide which loads to control and first draw of the connection between the equipements and electrical board. 2- Decide which equipement to be used to monitor electrical consumption in the embassy : NG9.
7
NG9
Why NG9? • The world smallest analyzer featuring 9 channels within 9cm. •Price and occupied volume are reduced during installation. •Reduced installation errors to allow a simple and correct start up.
8
Tuesday 10/03/2015
1- Do the electrical skim for each NG9 and the general connection between them. 2- Labelling of the TA. 3- Test: comparison between NG9 and Efficiency terminal mesurements
9
Thursday 12/03/2015
Finish the connection between the different NG9. The box is ready to be send to be installed in the embassy.
11
Friday 13/03/2015
1-Working on ESweb software of acquisition data from NG9. 2-Change the configuration according of the operation mode in Tunisisa. 3- Manipulation of the software options.. 4- Configuration of the Pc box
12
Monday 16/03/2015
Schedule activities:
•We did the statement of accounts of the last two weeks. • We met with the team work to schedule next steps and tasks to accomplish.
13
Tuesday 17/03/2015
14
Day on Energy Sentinel Web, we learned: How to do a report. Understand the graphs. Configure algebraic modules. To handle software options (historical Data and real time data).
Wednesday18/03/2015
15
We read reports about historical cases. We did discussion to reply to our questions and improve our critical and analytic mind.
Wednesday18/03/2015
16
We read reports about historical cases. We did discussion to reply to our questions and improve our critical and analytic mind.
Thursday 19/03/2015
17
We established a study case about compressed air in French which was a good example of energy audit in the industry of compressed air. We did a discussion about the solutions with team member. Manipulation of data, collected through Efficiency Terminal, with ES3.
Friday 20/03/2015
18
Configuration of NG9 according to modifications decided with Energy Team technicians . We received the electrical schemes of equipment’s installation, in general an in detail of connections of each NG9.
Monday 23/03/2015
19
General report on consumption’s graphs of the registration period of data from Energy Sentinel Web.
We have been working on the Energy Team consumption more precisely about the storage room lightning:
Tuesday 24/03/2015
20
We continued working on storage room lightning:
Detailed report on wastes and gains of energy Creation of three scenario based on different utility factor in order to better modelize our study case.
Wednesday 25/03/2015
21
Work done, revision with the team work and discussion on the hypothesis proposed for this case.
Thursday 26/03/2015
22
Finishing the configuration of the PC box.
Working on Efficiency Terminal, and importation of data to ES3 software with master working on this device.
Friday 27/03/2015
23
The NG9s are ready to be send and installed in the embassy. Training with Efficiency Terminal. Finishing the audit energy report on lightning of the storage room.
25
During this two month we have been working on:
Increasing knowledge about energy team services and products. Learning analysing data collected from energy team’s softwares. Studying old report of real cases in order to understand how to work on an energy audit report. Doing an energy audit report about the lightning consumption of storage room. Finishing configuration of PC Box in order to send equipment to the embassy. Closing the activities to be done in order to finish the training and learn how to manipulate the equipment to be installed (NG9, PC BOX, Efficiency Terminal.
Conclusion