WORK PROGRAMME - DPS month Work Programme… · WORK PROGRAMME of General ... EN 60404-5:2015...

1

WORK PROGRAMME of General Directorate of Standardization - ALBANIA

(Period 1 July to 31 December 2016)

Technical Committee No. 1 “Quality assurance and social responsibility”, 1 standard

No. Standard number English title

1. EN ISO 15378:2015 Primary packaging materials for medicinal products - Particular requirements

for the application of ISO 9001:2008, with reference to Good Manufacturing

Practice (GMP) (ISO 15378:2015)

Technical Committee No. 3 “Electrical and electronical materials”, 78 standards


1. EN ISO/IEC 13273-1:2016 Energy efficiency and renewable energy sources - Common international

terminology - Part 1: Energy efficiency

2. EN ISO/IEC 13273-2:2016 Energy efficiency and renewable energy sources - Common international

terminology - Part 2: Renewable energy sources

3. EN 16247-5:2015 Energy audits - Part 5: Competence of energy auditors

4. EN 50180-1:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled

transformers - Part 1: General requirements for bushings

5. EN 50290-2-

21:2001/A1:2007/AC:2016

Communication cables - Part 2-21: Common design rules and construction -

PVC insulation compounds

6. EN 50525-2-21:2011/AC:2013 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750

V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked

elastomeric insulation

7. EN 60061-1:1993/A52:2016 Lamp caps and holders together with gauges for the control of

interchangeability and safety - Part 1: Lamp caps

8. EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications

9. EN 60317-31:2016 Specifications for particular types of winding wires - Part 31: Glass fibre

wound, resin or varnish impregnated, bare or enamelled rectangular copper

wire, temperature index 180







2

12. EN 60317-39:2016 Specifications for particular types of winding wires - Part 39: Glass-fibre

braided resin or varnish-impregnated, bare or enamelled rectangular copper


13. EN 60320-1:2015/AC:2016 Appliance couplers for household and similar general purposes - Part 1:

General requirements

14. EN 60404-5:2015 Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials -

Methods of measurement of magnetic properties

15. EN 60404-8-1:2015 Magnetic materials - Part 8-1: Specifications for individual materials -

Magnetically hard materials

16. EN 60534-2-3:2016 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures

17. EN 60598-1:2015/AC:2016 Luminaires - Part 1: General requirements and tests

18. EN 60599:2016 Mineral oil-filled electrical equipment in service - Guidance on the

interpretation of dissolved and free gases analysis

19. EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services -

Part 5: Headend equipment

20. EN 60793-2-10:2016 Optical fibres - Part 2-10: Product specifications - Sectional specification for

category A1 multimode fibre

21.

EN 60793-2-20:2016

Optical fibres - Part 2-20: Product specifications - Sectional specification for

category A2 multimode fibres


category A4 multimode fibres

23. EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures -

Numerical aperture measurement


class B single-mode fibres

25. EN 60794-1-21:2015 Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test

procedures - Mechanical tests methods

26. EN 60794-3-21:2016 Optical fibre cables - Part 3-21: Outdoor cables - Product specification for

optical self-supporting aerial telecommunication cables for use in premises

cabling

27. EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial

discharge measurements on lengths of extruded power cables

28. EN 60929:2011/A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps -

Performance requirements

29. EN 60966-2-7:2016 Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for

cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000

MHz, IEC 61169-47 connectors

30. EN 60968:2015/AC:2015 Self-ballasted fluorescent lamps for general lighting services - Safety

requirements

31. EN 61048:2006/A1:2016 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other

discharge lamp circuits - General and safety requirements

32. EN 61169-51:2015 Radio-frequency connectors - Part 51: Sectional specification for RF coaxial

connectors with inner diameter of outer conductors 13,5 mm with bayonet lock

- Characteristic impedance 50 Ohm (type QLI)

33. EN 61242:1997/A2:2016 Electrical accessories - Cable reels for household and similar purposes

34. EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters

3

35. EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters -

Optical power meter method

36. EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements

37. EN 61427-2:2015 Secondary cells and batteries for renewable energy storage - General

requirements and methods of test - Part 2: On-grid applications

38. EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components - Performance

standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-

NGA WWDM devices for category C - Controlled environment


standard - Part 381-2: Cyclic arrayed waveguide grating - Category C

(controlled environment)


standard - Part 381-6: Cyclic arrayed waveguide grating - Category O

(uncontrolled environment)

41. EN 61754-4-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic

connector interfaces - Part 4-100: Type SC connector family - Simplified

receptacle SC-PC connector interfaces

42. EN 61754-6-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic

connector interfaces - Part 6-100: Type MU connector family - Simplified

receptacle MU-PC connector interfaces

43. EN 61755-3-32:2016 Fibre optic interconnecting devices and passive components - Connector optical

interfaces - Part 3-32: Connector parameters of non-dispersion shifted single

mode physically contacting fibres - Angled thermoset epoxy rectangular

ferrules

44. EN 61914:2016 Cable cleats for electrical installations

45. EN 61970-452:2015 Energy management system application program interface (EMS-API) - Part

452: CIM model exchange specification

46. EN 61970-456:2013/A1:2016 Energy management system application program interface (EMS-API) - Part

456: Solved power system state profiles

47. EN 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications - Part

1: Specification template for essential ratings and characteristics

48. EN 62493:2015 Assessment of lighting equipment related to human exposure to

electromagnetic fields

49. EN

62560:2012/A1:2015/AC:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety

specifications

50. EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2:

Determination of resistive properties (DC Methods) - Surface resistance and

surface resistivity

51. EN 62631-3-3:2016 Dielectric and resistive properties of solid insulating materials - Part 3-3:

Determination of resistive properties (DC Methods) - Insulation resistance

52. EN 62722-1:2016 Luminaire performance - Part 1: General requirements

53. EN 62722-2-1:2016 Luminaire performance - Part 2-1: Particular requirements for LED luminaires

54. EN 62733:2015 Programmable components in electronic lamp controlgear - General and safety

requirements

55. EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss

dielectric rods

4

56. EN 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding

fluorescent lamps) - Performance requirements for low frequency squarewave

operation

57. EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding

50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications

58. IEC 60183:2015 Guidance for the selection of high-voltage A.C. cable systems

59. IEC 60189-1:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1:

General test and measuring methods


Cables in pairs, triples, quads and quintuples for inside installations


Equipment wires with solid or stranded conductor wires, PVC insulated, in

singles, pairs and triples

62. IEC 60724:2000 Short-circuit temperature limits of electric cables with rated voltages of 1 kV

(Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

63. IEC 60724:2000/A1:2008 Amendment 1 - Short-circuit temperature limits of electric cables with rated

voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

64. IEC/TR 60797:1984 Residual strength of string insulator units of glass or ceramic material for

overhead lines after mechanical damage of the dielectric

65. IEC 60800:2009 Heating cables with a rated voltage of 300/500 V for comfort heating and

prevention of ice formation

66. IEC 60803:1984 Recommended dimensions for hexagonal and square crimping-die cavities,

indentors, ganges, outer conductor crimp sleeves and centre contact crimp

barrels for R.F. cables and connectors

67. IEC 60803:1984/A1:1995 Amendment 1 - Recommended dimensions for hexagonal and square crimping-

die cavities, indentors, ganges, outer conductor crimp sleeves and centre

contact crimp barrels for R.F. cables and connectors

68. IEC 60874-14-1:1997 Connectors for optical fibres and cables - Part 14-1: Detail specification for fibre

optic connector type SC/PC standard terminated to multimode fibre type A1a,

A1b


optic connector type SC/PC tuned terminated to single-mode fibre type B1


optic adaptor (simplex) type SC for single-mode fibre


optic adaptor (simplex) type SC for multi-mode fibre


optic connector type SC-PC untuned terminated to single-mode fibre type B1


optic connector type SC-APC 9° tuned terminated to single-mode fibre Type B1

74. IEC 60874-14-9:1999 Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type

SC-APC tuned 8° terminated on single mode fibre type B1 - Detail specification

75. IEC 60874-14-10:1999 Connectors for optical fibres and cables - Part 14-10: Fibre optic pigtail or patch

cord connector type SC-APC untuned 8° terminated on single mode fibre type

B1 - Detail specification

76. IEC 60874-19-1:2007 Fibre optic interconnecting devices and passive components - Connectors for

5

optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-

PC (floating duplex) standard terminated on multimode fibre type A1a, A1b -

Detail specification

77. IEC 60874-19-2:1999 Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex)

type SC for single-mode fibre connectors - Detail specification

78. IEC 60874-19-3:2007 Fibre optic interconnecting devices and passive components - Connectors for

optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for

multimode fibre connectors - Detail specification

Technical Committee No. 4 “Electrical and electronic devices”, 38 standards


1. EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems

2. EN 50629:2015 Energy performance of large power transformers (Um > 36 kV or Sr ≥ 40 MVA)

3. CLC/TR 50656:2016 SPD application in conjunction with Class II equipment

4. EN 60086-2:2016 Primary batteries - Part 2: Physical and electrical specifications

5. CLC/TS 61643-22:2016 Low-voltage surge protective devices - Part 22: Surge protective devices

connected to telecommunications and signalling networks - Selection and

application principles

6. EN 61800-7-1:2016 Adjustable speed electrical power drive systems - Part 7-1: Generic interface

and use of profiles for power drive systems - Interface definition


and use of profiles for power drive systems - Profile type 1 specification








and use of profiles for power drive systems - Mapping of profile type 1 to

network technologies




13. EN 61800-7-303:2016 Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use

of profiles for power drive systems - Mapping of profile type 3 to network technologies




15. EN 61850-7-410:2013/A1:2016 Communication networks and systems for power utility automation - Part 7-410: Basic

communication structure - Hydroelectric power plants - Communication for monitoring

and control

6

16. EN 61851-24:2014/AC:2015 Electric vehicle conductive charging system - Part 24: Digital communication

between a d.c. EV charging station and an electric vehicle for control of d.c.

charging

17. EN 61968-8:2016 Application integration at electric utilities - System interfaces for distribution

management - Part 8: Interfaces for customer operations

18. EN 62087-1:2016 Audio, video, and related equipment - Determination of power consumption -

Part 1: General


Part 2: Signals and media


Part 3: Television sets

21. EN 62087-4:2016 Audio, video and related equipment - Determination of power consumption -

Part 4: Video recording equipment

22. EN 62087-5:2016 Audio, video and related equipment - Determination of power consumption -

Part 5: Set top boxes (STB)

23. EN 62231-1:2016 Composite station post insulators for substations with AC voltages greater than

1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical

characteristics

24. EN 62246-1:2015 Reed switches - Part 1: Generic specification

25. EN 62271-200:2012/AC:2015 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed

switchgear and controlgear for rated voltages above 1 kV and up to and

including 52 kV

26. EN 62271-202:2014/AC:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage

prefabricated substation

27. EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy

measurement

28. EN 62877-1:2016 Electrolyte and water for vented lead acid accumulators - Part 1: Requirements

for electrolyte

29. EN 62877-2:2016 Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water

30. IEC 60086-3:2016 Primary batteries - Part 3: Watch batteries

31. IEC 60214-2:2004 Tap-changers - Part 2: Application guide

32. IEC 60358:1990 Coupling capacitors and capacitor dividers

33. IEC 60805:1985 Guide for commissioning, operation and maintenance of storage pumps and of

pump-turbines operating as pumps

34. IEC 60947-5-1:2016 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and

switching elements - Electromechanical control circuit devices

35. IEC 61851-

23:2014/COR1:2016

Corrigendum 1 - Electric vehicle conductive charging systems - Part 23: DC

electric vehicle charging station

36. IEC/TR 62001-1:2016 High-voltage direct current (HVDC) systems - Guidance to the specification

and design evaluation of AC filters - Part 1: Overview

37. IEC/TR 62001-4:2016 High-voltage direct current (HVDC) systems - Guidance to the specification

and design evaluation of AC filters - Part 4: Equipment

38. IEC 62660-3:2016 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3:

Safety requirements

7

Technical Committee No. 6 “Technical safety and environment” 71 standards


1. CLC Guide 1:2015 Survey of Resolutions of the CENELEC General Assembly

2. CLC Guide 8:2016 The Vilamoura notification procedure for new national work and for the

revision of national standards

3. EN 50090-5-3:2016 Home and Building Electronic Systems (HBES) - Part 5-3: Media and media

dependent layers - Radio Frequency for HBES Class 1

4. EN 50229:2015/AC:2016 Electric clothes washer-dryers for household use - Methods of measuring the

performance

5. EN 60079-14:2014/AC:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and

erection

6. EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use

and maintenance of detectors for flammable gases and oxygen

7. EN 60335-2-

14:2006/A11:2012/AC:2016

Household and similar electrical appliances - Safety - Part 2-14: Particular

requirements for kitchen machines

8. EN 60335-2-37:2002/A12:2016 Household and similar electrical appliances - Safety - Part 2-37: Particular

requirements for commercial electric deep fat fryers


requirements for commercial electric dishwashing machines


requirements for commercial refrigerating appliances with an incorporated or

remote refrigerant condensing unit or compressor

11. EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular

requirements for gas, oil and solid-fuel burning appliances having electrical

connections

12. EN 60456:2016 Clothes washing machines for household use - Methods for measuring the

performance

13. EN 60601-2-3:2015 Medical electrical equipment - Part 2-3: Particular requirements for the basic

safety and essential performance of short-wave therapy equipment

14. EN 60601-2-8:2015/A1:2016 Medical electrical equipment - Part 2-8: Particular requirements for the basic

safety and essential performance of therapeutic X-ray equipment operating in

the range 10 kV to 1 MV


safety and essential performance of magnetic resonance equipment for medical

diagnosis


safety and essential performance of magnetic resonance equipment for medical

diagnosis

17. EN 60601-2-36:2015 Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and

essential performance of equipment for extracorporeally induced lithotripsy


safety and essential performance of ultrasonic medical diagnostic and

monitoring equipment

8

19. EN 60601-2-41:2009/A1:2015 Medical electrical equipment - Part 2-41: Particular requirements for basic

safety and essential performance of surgical luminaires and luminaires for

diagnosis


safety and essential performance of mammographic X-ray equipment and

mammographic stereotactic devices


safety and essential performance of medical beds


safety and essential performance of X-ray equipment for radiography and

radioscopy


safety and essential performance of high intensity therapeutic ultrasound

(HITU) equipment


safety and essential performance of dental extra-oral X-ray equipment


safety and essential performance of light ion beam medical electrical equipment


safety and essential performance of hearing instruments and hearing

instrument systems

27. EN 60601-2-68:2015 Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and

essential performance of X-ray-based image-guided radiotherapy equipment for use

with electron accelerators, light ion beam therapy equipment and radionuclide beam

therapy equipment

28. EN 60627:2015 Diagnostic X-ray imaging equipment - Characteristics of general purpose and

mammographic anti-scatter grids

29. EN 60745-2-3:2011/A13:2015 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular

requirements for grinders, polishers and disk-type sanders

30. EN 60839-11-2:2015/AC:2015 Alarm and electronic security systems - Part 11-2: Electronic access control

systems - Application guidelines

31. EN 61175-1:2015 Industrial systems, installations and equipment and industrial products -

Designation of signals - Part 1: Basic rules

32. EN 61427-2:2015 Secondary cells and batteries for renewable energy storage - General

requirements and methods of test - Part 2: On-grid applications

33. EN 61472:2013/AC:2015 Live working - Minimum approach distances for a.c systems in the voltage

range 72,5 kV to 800 kV - A method of calculation

34. EN 61675-2:2015 Radionuclide imaging devices - Characteristics and test conditions - Part 2:

Gamma cameras for planar, wholebody, and SPECT imaging

35. EN 61804-4:2016 Function blocks (FB) for process control and Electronic Device Description

Language (EDDL) - Part 4: EDD interpretation

36. EN 62080:2009/A2:2015 Sound signalling devices for household and similar purposes

37. EN 62264-4:2016 Enterprise-control system integration - Part 4: Object model attributes for

manufacturing operations management integration

38. EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems -

Performance test methods

39. EN 62304:2006/A1:2015 Medical device software - Software life-cycle processes

9

40. EN 62320-1:2015 Maritime navigation and radiocommunication equipment and systems -

Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum

operational and performance requirements, methods of testing and required

test results

41. EN 62320-3:2015 Maritime navigation and radiocommunication equipment and systems -

Automatic identification systems (AIS) - Part 3: Repeater stations - Minimum

operational and performance requirements - Methods of test and required test

results

42. EN 62467-1:2015 Medical electrical equipment - Dosimetric instruments as used in

brachytherapy - Part 1: Instruments based on well-type ionization chambers

43. EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy

measurement

44. EN 62682:2015 Management of alarms systems for the process industries

45. EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and

garden machinery - Safety - Part 2-11: Particular requirements for hand-held

reciprocating saws

46. EN ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications - Part 6:

Connectors for neuraxial applications

47. HD 60364-4-443:2016 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection

against voltage disturbances and electromagnetic disturbances - Clause 443:

Protection against transient overvoltages of atmospheric origin or due to

switching

48. HD 60364-5-534:2016 Low-voltage electrical installations - Part 5-53: Selection and erection of

electrical equipment - Isolation, switching and control - Clause 534: Devices for

protection against transient overvoltages

49. HD 60364-5-551:2010/A11:2016 Low-voltage electrical installations - Part 5-55: Selection and erection of

electrical equipment - Other equipment - Clause 551: Low-voltage generating

sets

50. HD 60364-5-557:2013/A11:2016 Low-voltage electrical installations - Part 5-557: Selection and erection of

electrical equipment - Auxiliary circuits

51. HD 60364-7-712:2016 Low-voltage electrical installations - Part 7-712: Requirements for special

installations or locations - Photovoltaic (PV) systems

52. HD 60364-7-722:2016 Low-voltage electrical installations - Part 7-722: Requirements for special

installations or locations - Supplies for electric vehicles

53. HD 62640:2015/A11:2016 Residual current devices with or without overcurrent protection for socket-

outlets for household and similar uses

54. IEC 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of

detectors for flammable gases

55. IEC 60335-2-72:2016 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements

for floor treatment machines with or without traction drive, for commercial use

56. IEC 60335-2-87:2016 Household and similar electrical appliances - Safety - Part 2-87: Particular

requirements for electrical animal stunning equipment

57. IEC 60530:1975 Methods for measuring the performance of electric kettles and jugs for

household and similar use

58. IEC 60530:1975/A1:1992 Amendment 1 - Methods for measuring the performance of electric kettles and

jugs for household and similar use

10

59. IEC 60530:1975/A2:2004 Amendment 2 - Methods for measuring the performance of electric kettles and

jugs for household and similar use

60. IEC/TR 60601-4-2:2016 Medical electrical equipment - Part 4-2: Guidance and interpretation -

Electromagnetic immunity: performance of medical electrical equipment and

medical electrical systems

61. IEC/TR 60788:2004 Medical electrical equipment - Glossary of defined terms

62. IEC 60839-5-2:2016 Alarm and electronic security systems - Part 5-2: Alarm transmission systems -

Requirements for supervised premises transceiver (SPT)

63. IEC 60839-5-3:2016 Alarm and electronic security systems - Part 5-3: Alarm transmission systems -

Requirements for receiving centre transceiver (RCT)

64. IEC/TS 61223-1:1993 Evaluation and routine testing in medical imaging departments - Part 1:

General aspects

65. IEC/TS 61223-2-1:1993 Evaluation and routing testing in medical imaging departments - Part 2-1:

Constancy tests - Film processors

66. IEC 61730-1:2016 Photovoltaic (PV) module safety qualification - Part 1: Requirements for

construction

67. IEC 61730-2:2016 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

68. IEC 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2:

Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants

and other polymeric materials

69. IEC 62793:2016 Protection against lightning - Thunderstorm warning systems

70. IEC/TR 80001-2-8:2016 Application of risk management for IT-networks incorporating medical devices

- Part 2-8: Application guidance - Guidance on standards for establishing the

security capabilities identified in IEC TR 80001-2-2

71. ISO/IEC 80079-20-2:2016 Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts

test methods

Technical Committee No. 7 “Semiconductor materials and devices. Electromechanical

components and mechanical structures for electronic devices”,

32 standards


1. IEC 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional

specification - Fixed aluminium electrolytic surface mount capacitors with solid

(MnO2) and non-solid electrolyte

2. IEC 60747-2:2016 Semiconductor devices - Part 2: Discrete devices - Rectifier diodes

3. IEC 60747-4:2007 Semiconductor devices - Discrete devices - Part 4: Microwave diodes and

transistors

4. IEC 60747-5-4:2006 Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices -

Semiconductor lasers

5. IEC 60747-5-6:2016 Semiconductor devices - Part 5-6: Optoelectronic devices - Light emitting

diodes

11

6. IEC 60747-5-7:2016 Semiconductor devices - Part 5-7: Optoelectronic devices - Photodiodes and

phototransistors

7. IEC 60747-6:2016 Semiconductor devices - Part 6: Discrete devices - Thyristors

8. IEC 60747-9:2007 Semiconductor devices - Discrete devices - Part 9: Insulated-gate bipolar

transistors (IGBTs)

9. IEC 60747-14-1:2010 Semiconductor devices - Part 14-1: Semiconductor sensors - Generic

specification for sensors

10. IEC 60747-14-2:2000 Semiconductor devices - Part 14-2: Semiconductor sensors - Hall elements

11. IEC 60747-14-3:2009 Semiconductor devices - Part 14-3: Semiconductor sensors - Pressure sensors

12. IEC 60747-14-4:2011 Semiconductor devices - Discrete devices - Part 14-4: Semiconductor

accelerometers

13. IEC 60747-14-5:2010 Semiconductor devices - Part 14-5: Semiconductor sensors - PN-junction

semiconductor temperature sensor

14. IEC 60748-3:1986 Semiconductor devices - Integrated circuits - Part 3: Analogue integrated

circuits

15. IEC 60748-3:1986/A1:1991 Amendment 1 - Semiconductor devices. Integrated circuits. Part 3: Analogue

integrated circuits

16. IEC 60748-3:1986/A2:1994 Amendment 2 - Semiconductor devices. Integrated circuits. Part 3: Analogue

integrated circuits

17. IEC 60748-3-1:1991 Semiconductor devices. Integrated circuits - Part 3: Analogue integrated circuits

- Section one: Blank detail specification for monolithic integrated operational

amplifiers

18. IEC 60748-4:1997 Semiconductor devices - Integrated circuits - Part 4: Interface integrated circuits

19. IEC 60748-4-1:1993 Semiconductor devices - Integrated circuits - Part 4: Interface integrated circuits - Section

1: Blank detail specification for linear digital-to-analogue converters (DAC)

20. IEC 60748-4-2:1993 Semiconductor devices - Integrated circuits - Part 4: Interface integrated circuits - Section

2: Blank detail specification for linear analogue-to-digital converters (ADC)

21. IEC 60748-5:1997 Semiconductor devices - Integrated circuits - Part 5: Semicustom integrated

circuits

22. IEC 60748-11:1990 Semiconductor devices - Integrated circuits - Part 11: Sectional specification for

semiconductor integrated circuits excluding hybrid circuits

23. IEC 60748-11:1990/A1:1995 Amendment 1 - Semiconductor devices - Integrated circuits - Part 11: Sectional

specification for semiconductor integrated circuits excluding hybrid circuits

24. IEC 60748-11:1990/A2:1999 Amendment 2 - Semiconductor devices - Integrated circuits - Part 11: Sectional

specification for semiconductor integrated circuits excluding hybrid circuits

25. IEC 60748-11-1:1992 Semiconductor devices - Integrated circuits - Part 11-1: Internal visual

examination for semiconductor integrated circuits excluding hybrid circuits

26. IEC 60748-20:1988 Semiconductor devices. Integrated circuits. Part 20: Generic specification for

film integrated circuits and hybrid film integrated circuits

27. IEC 60748-20:1988/A1:1995 Amendment 1 - Semiconductor devices. Integrated circuits. Part 20: Generic

specification for film integrated circuits and hybrid film integrated circuits

28. IEC 60748-20-1:1994 Semiconductor devices - Integrated circuits - Part 20: Generic specification for film

integrated circuits and hybrid film integrated circuits - Section 1: Requirements for

internal visual examination

29. IEC 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44:

Neutron beam irradiated single event effect (SEE) test method for

semiconductor devices

12

30. IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment

system for electronic components (IECQ) - Part 1: Generic specification -

Qualification approval

31. IEC 61253-2:1993 Piezoelectric ceramic resonators - A Specification in the IEC quality assessment

system for electronic components (IECQ) - Part 2: Sectional specification -

Qualification approval

32. IEC 61253-2-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system

for electronic components (IECQ) - Part 2: Sectional specification - Qualification

approval - Section 1: Blank detail specification - Assessment level E

Technical Committee No. 8 “Measuring equipment. Testing techniques”, 45 standards


1. EN 50545-1:2011/A1:2016 Electrical apparatus for the detection and measurement of toxic and

combustible gases in car parks and tunnels - Part 1: General performance

requirements and test methods for the detection and measurement of carbon

monoxide and nitrogen oxides

2. EN 50561-3:2016 Power line communication apparatus used in low-voltage installations - Radio

disturbance characteristics - Limits and methods of measurement - Part 3:

Apparatus operating above 30 MHz

3. EN 55016-1-3:2006/A1:2016 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 1-3: Radio disturbance and immunity measuring apparatus -

Ancillary equipment - Disturbance power

4. EN 55016-1-5:2015 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 1-5: Radio disturbance and immunity measuring apparatus -

Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

5. EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined

temperature or temperature and humidity with low air pressure tests

6. EN 60270:2001/A1:2016 High-voltage test techniques - Partial discharge measurements

7. EN 60603-7-81:2016 Connectors for electronic equipment - Part 7-81: Detail specification for 8-way,

shielded, free and fixed connectors, for data transmissions with frequencies up

to 2 000 MHz

8. EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,

voltage fluctuations and flicker in public low-voltage supply systems, for equipment

with rated current <= 16 A per phase and not subject to conditional connection

9. EN 61000-4-6:2014/AC:2015 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement

techniques - Immunity to conducted disturbances, induced by radio-frequency

fields

10. EN 61000-4-13:2002/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement

techniques - Harmonics and interharmonics including mains signalling at a.c.

power port, low frequency immunity tests

11. EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement

techniques - Test for immunity to conducted, common mode disturbances in

the frequency range 0 Hz to 150 kHz

13

12. EN 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement

techniques - Power quality measurement methods

13. EN 61987-24-1:2016 Industrial-process measurement and control - Data structures and elements in

process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of

positioners and I/P converters for electronic data exchange

14. EN 61987-23:2016 Industrial-process measurement and control - Data structures and elements in

process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators

for electronic data exchange


process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body

assemblies for electronic data exchange


process equipment catalogues - Part 21: List of Properties (LOP) of automated

valves for electronic data exchange - Generic structures

17. EN 61189-5-2:2015 Test methods for electrical materials, printed boards and other interconnection

structures and assemblies - Part 5-2: General test methods for materials and

assemblies - Soldering flux for printed board assemblies



assemblies - Soldering paste for printed board assemblies



assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed

board assemblies


structures and assemblies - Part 3-719: Test methods for interconnection

structures (printed boards) - Monitoring of single plated-through hole (PTH)

resistance change during temperature cycling

21. EN 62137-4:2014 Electronics assembly technology - Part 4: Endurance test methods for solder

joint of area array type package surface mount devices

22. EN 62137-4:2014/AC:2015 Electronics assembly technology - Part 4: Endurance test methods for solder

joint of area array type package surface mount devices

23. EN 62559-2:2015 Use case methodology - Part 2: Definition of the template for use cases, actor

list and requirements list

24. EN 62541-11:2015 OPC unified architecture - Part 11: Historical Access

25. EN 62541-13:2015 OPC unified architecture - Part 13: Aggregates

26. IEC 60068-3-13:2016 Environmental testing - Part 3-13: Supporting documentation and guidance on

Test T - Soldering

27. IEC 60603-7-82:2016 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way,

12 contacts, shielded, free and fixed connectors, for data transmission with

frequencies up to 2 000 MHz

28. IEC/TS 60695-5-2:2002 Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent -

Summary and relevance of test methods

29. IEC/TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

30. IEC/TS 60695-11-11:2016 Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic

heat flux for ignition from a non-contacting flame source

14

31. IEC/TS 60695-11-21:2005 Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method

for tubular polymeric materials

32. IEC 60721-2-4:1987 Classification of environmental conditions. Part 2: Environmental conditions

appearing in nature. Solar radiation and temperature

33. IEC 60721-2-4:1987/A1:1988 Amendment 1 - Classification of environmental conditions. Part 2:

Environmental conditions appearing in nature. Solar radiation and temperature

34. IEC 60721-2-5:1991 Classification of environmental conditions - Part 2: Environmental conditions

appearing in nature - Section 5: Dust, sand, salt mist


appearing in nature. Earthquake vibration and shock


appearing in nature. Fauna and flora

37. IEC/TR 60721-4-0:2002 Classification of environmental conditions - Part 4-0: Guidance for the

correlation and transformation of the environmental condition classes of IEC

60721-3 to the environmental tests of IEC 60068 - Introduction


correlation and transformation of environmental condition classes of IEC 60721-

3 to the environmental tests of IEC 60068 - Storage

39. IEC/TR 60721-4-1:2001/A1:2003 Amendment 1 - Classification of environmental conditions - Part 4-1: Guidance

for the correlation and transformation of environmental condition classes of

IEC 60721-3 to the environmental tests of IEC 60068 - Storage


correlation and transformation of environmental condition classes of IEC 60721-

3 to the environmental tests of IEC 60068 - Transportation

41. IEC/TR 60721-4-2:2001/A1:2003 Amendment 1 - Classification of environmental conditions - Part 4-2: Guidance

for the correlation and transformation of environmental condition classes of

IEC 60721-3 to the environmental tests of IEC 60068 - Transportation

42. IEC/TR 60725:2012 Consideration of reference impedances and public supply network impedances

for use in determining the disturbance characteristics of electrical equipment

having a rated current ≤75 A per phase

43. IEC/TR 60782:1984 Measurements of ultrasonic magnetostrictive transducers

44. IEC/TS 60816:1984 Guide on methods of measurement of short duration transients on low-voltage

power and signal lines

45. IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and

laboratory use - Part 2-020: Particular requirements for laboratory centrifuges

15

Technical Committee No. 9

“Information and communication technology”, 35 standards


1. EN 60065:2014/AC:2016 Audio, video and similar electronic apparatus - Safety requirements

2. EN 50083-2:2012/A1:2015 Cable networks for television signals, sound signals and interactive services - Part 2:

Electromagnetic compatibility for equipment

3. EN 61158-3-2:2014 Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer

service definition - Type 2 elements

4. EN 61158-3-3:2014 Industrial communication networks - Fieldbus specifications - Part 3-3: Data-

link layer service definition - Type 3 elements














link layer service definition - Type-24 elements

12. EN 61158-4-2:2014 Industrial communication networks - Fieldbus specifications -Part 4-2: Data-

link layer protocol specification - Type 2 elements














protocol specification - Type 19 elements





16



23. EN 61158-5-3:2014 Industrial communication networks - Fieldbus specifications - Part 5-3:

Application layer service definition - Type 3 elements
























Application layer service definition - Type-24 elements

Technical Committee No. 10 “Digital and analogue telecommunication systems”, 403 standards


1. EN 319 422 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and

time-stamp token profiles

2. EN 319 421 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Policy and Security

Requirements for Trust Service Providers issuing Time-Stamps

3. EN 319 412-5 V2.1.1:2016 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 5: QCStatements

4. EN 319 412-4 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4:

Certificate profile for web site certificates


Certificate profile for certificates issued to legal persons


Certificate profile for certificates issued to natural persons

17

7. EN 319 412-1 V1.1.1 2016 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:

Overview and common data structures

8. EN 319 411-2 V2.1.1:2016 Electronic Signatures and Infrastructures (ESI); Policy and security

requirements for Trust Service Providers issuing certificates; Part 2:

Requirements for trust service providers issuing EU qualified certificates

9. EN 319 411-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Policy and security

requirements for Trust Service Providers issuing certificates; Part 1: General

requirements

10. EN 319 401 V2.1.1:2016 Electronic Signatures and Infrastructures (ESI); General Policy Requirements

for Trust Service Providers

11. EN 319 162-2 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Associated Signature

Containers (ASiC); Part 2: Additional ASiC containers

12. EN 319 162-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Associated Signature

Containers (ASiC); Part 1: Building blocks and ASiC baseline containers

13. EN 319 142-2 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); PAdES digital signatures; Part 2:

Additional PAdES signatures profiles

14. EN 319 142-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); PAdES digital signatures; Part

1: Building blocks and PAdES baseline signatures

15. EN 319 132-2 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); XAdES digital signatures; Part

2: Extended XAdES signatures

16. EN 319 132-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); XAdES digital signatures; Part

1: Building blocks and XAdES baseline signatures

17. EN 319 122-2 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); CAdES digital signatures; Part

2: Extended CAdES signatures

18. EN 319 122-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); CAdES digital signatures; Part

1: Building blocks and CAdES baseline signatures

19. EN 319 102-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Procedures for Creation and

Validation of AdES Digital Signatures; Part 1: Creation and Validation

20. EN 319 102-1 V1.1.1:2016 Electronic Signatures and Infrastructures (ESI); Procedures for Creation and Validation

of AdES Digital Signatures; Part 1: Creation and Validation

21. EN 303 979 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on

Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit,

operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands

covering the essential requirements of article 3.2 of the Directive 2014/53/EU

22. EN 303 978 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on

Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit,

operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential

requirements of article 3.2 of the Directive 2014/53/EU

23. EN 303 609 V12.5.1:2016 Global System for Mobile communications (GSM); GSM Repeaters; Harmonised

Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

24. EN 303 372-2 V1.1.1:2016 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment;

Harmonised Standard covering the essential requirements of article 3.2 of the Directive

2014/53/EU; Part 2: Indoor unit

25. EN 303 340 V1.1.1:2016 Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential

requirements of article 3.2 of Directive 2014/53/EU

26. EN 303 213-6-1 V2.1.1:2016 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6:

Harmonised Standard covering the essential requirements of article 3.2 of the Directive

2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors

using pulsed signals and transmitting power up to 100 kW

18

27. EN 303 204 V2.1.1:2016 Network Based Short Range Devices (SRD); Radio equipment to be used in the

870 MHz to 876 MHz frequency range with power levels ranging up to 500

mW; Harmonised Standard covering the essential requirements of article 3.2 of

the Directive 2014/53/EU

28. EN 303 146-2 V1.2.1:2016 Reconfigurable Radio Systems (RRS); Mobile Device (MD) information models

and protocols; Part 2: Reconfigurable Radio Frequency Interface (RRFI)

29. EN 303 098 V2.1.1:2016 Maritime low power personal locating devices employing AIS; Harmonised

Standard covering the essential requirements of article 3.2 of the Directive

2014/53/EU

30. EN 303 039 V2.1.1:2016 Land Mobile Service; Multichannel transmitter specification for the PMR

Service; Harmonised Standard covering the essential requirements of article 3.2

of the Directive 2014/53/EU

31. EN 302 977 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-

Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands


32. EN 302 961 V2.1.1:2016 Maritime Personal Homing Beacon intended for use on the frequency 121,5

MHz for search and rescue purposes only; Harmonised Standard covering the

essential requirements of article 3.2 of the Directive 2014/53/EU

33. EN 302 885 V2.1.1:2016 Portable Very High Frequency (VHF) radiotelephone equipment for the

maritime mobile service operating in the VHF bands with integrated handheld

class D DSC; Harmonised Standard covering the essential requirements of

articles 3.2 and 3.3(g) of the Directive 2014/53/EU

34. EN 302 561 V2.1.1:2016 Land Mobile Service; Radio equipment using constant or non-constant

envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100

kHz or 150 kHz; Harmonised Standard covering the essential requirements of

article 3.2 of the Directive 2014/53/EU

35. EN 302 448 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking

Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands


36. EN 302 340 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite

Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency

bands allocated to the Fixed Satellite Service (FSS) covering the essential



mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency

bands covering the essential requirements of article 3.2 of the Directive

2014/53/EU

38. EN 301 908-21 V6.1.1:2016 IMT cellular networks; Harmonised Standard covering the essential

requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD

WMAN (Mobile WiMAXTM) FDD User Equipment (UE)



WMAN (Mobile WiMAXTM) TDD Base Stations (BS)



WMAN (Mobile WiMAXTM) TDD User Equipment (UE)


19

requirements of article 3.2 of the Directive 2014/53/EU; Part 15: Evolved

Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters


requirements of article 3.2 of the Directive 2014/53/EU; Part 14: Evolved

Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)


requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-

Carrier (cdma2000) Repeaters


requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct

Spread (UTRA FDD) Repeaters


requirements of article 3.2 of the Directive 2014/53/EU; Part 3: CDMA Direct

Spread (UTRA FDD) Base Stations (BS)

46. EN 301 843-6 V2.1.1:2016 ElectroMagnetic Compatibility (EMC) standard for marine radio equipment

and services; Harmonised Standard covering the essential requirements of

article 3.1b of the Directive 2014/53/EU; Part 6: Specific conditions for Earth

Stations on board Vessels operating in frequency bands above 3 GHz



article 3.1b of the Directive 2014/53/EU; Part 5: Specific conditions for MF/HF

radiotelephone transmitters and receivers



article 3.1b of the Directive 2014/53/EU; Part 4: Specific conditions for Narrow-

Band Direct-Printing (NBDP) NAVTEX receivers



article 3.1b of the Directive 2014/53/EU; Part 2: Specific conditions for VHF

radiotelephone transmitters and receivers



article 3.1b of the Directive 2014/53/EU; Part 1: Common technical requirements

51. EN 301 839 V2.1.1:2016 Ultra Low Power Active Medical Implants (ULP-AMI) and associated

Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405

MHz; Harmonised Standard covering the essential requirements of article 3.2 of

the Directive 2014/53/EU

52. EN 301 783 V2.1.1:2016 Commercially available amateur radio equipment; Harmonised Standard


53. EN 301 721 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth

Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth

Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential


54. EN 301 688 V1.2.1:2016 Technical characteristics and methods of measurement for fixed and portable

VHF equipment operating on 121,5 MHz and 123,1 MHz

55. EN 301 459 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite

Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting

20

towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz

frequency bands covering the essential requirements of article 3.2 of the

Directive 2014/53/EU


Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency

bands allocated to the Fixed Satellite Service (FSS) covering the essential


57. EN 301 443 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only

satellite earth stations operating in the 4 GHz and 6 GHz frequency bands


58. EN 301 442 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO

Mobile Earth Stations (MES) including handheld earth stations, for Satellite

Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2

010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth)

frequency bands under the Mobile Satellite Service (MSS) covering the essential


59. EN 301 430 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite

News Gathering Transportable Earth Stations (SNG TES) operating in the 11

GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential


60. EN 301 428 V2.1.1:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only

satellite earth stations operating in the 11/12/14 GHz frequency bands covering

the essential requirements of article 3.2 of the Directive 2014/53/EU

61. EN 301 406 V2.2.1:2016 Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard


62. EN 300 468 V1.15.1:2016 Digital Video Broadcasting (DVB); Specification for Service Information (SI) in

DVB systems

63. EN 300 433 V2.1.1:2016 Citizens' Band (CB) radio equipment; Harmonised Standard covering the


64. EN 300 390 V2.1.1:2016 Land Mobile Service; Radio equipment intended for the transmission of data

(and speech) and using an integral antenna; Harmonised Standard covering the


65. EN 300 341 V2.1.1:2016 Land Mobile Service; Radio equipment using an integral antenna transmitting

signals to initiate a specific response in the receiver; Harmonised Standard


66. EN 300 296 V2.1.1:2016 Land Mobile Service; Radio equipment using integral antennas intended

primarily for analogue speech; Harmonised Standard covering the essential


67. EN 300 065 V2.1.1:2016 Narrow-band direct-printing telegraph equipment for receiving meteorological

or navigational information (NAVTEX); Harmonised Standard covering the

essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

68. EN 302 094-1 V1.1.3:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling

System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call

Forwarding on Not Reachable (CFNRc) supplementary service for Cordless

Terminal Mobility (CTM) phase 1; Part 1: Protocol specification

21

69. EN 301 164 V1.1.1:1999 Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH);

SDH leased lines; Connection characteristics

70. EN 301 357 V1.1.1:1999 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical

characteristics and test methods for analogue cordless wideband audio devices

using integral antennas operating in the CEPT recommended 863 MHz to 865

MHz frequency range

71. EN 301 489-12 V1.1.1:2000

Electromagnetic compatibility and Radio spectrum Matters (ERM);

ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite

Interactive Earth Stations operated in the frequency ranges between 4 GHz and

30 GHz in the Fixed Satellite Service (FSS)

72. EN 300 698-2 V1.1.1:2000 Electromagnetic compatibility and Radio Spectrum Matters (ERM); Radio

telephone transmitters and receivers for the maritime mobile service operating

in the VHF bands used on inland waterways; Part 2: Harmonized EN covering

essential requirements of article 3.2 of the R&TTE Directive

73. EN 300 698-3 V1.1.1:2001 Electromagnetic compatibility and Radio Spectrum Matters (ERM); Radio


in the VHF bands used on inland waterways; Part 3: Harmonized EN covering

essential requirements of article 3.3 (e) of the R&TTE Directive

74. EN 300 718-3 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum matters (ERM); Avalanche

Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering

essential requirements of article 3.3e of the R&TTE Directive

75. EN 300 899-3 V1.1.1:2001 Integrated Services Digital Network (ISDN); Signalling System No.7;

Interworking between ISDN User Part (ISUP) version 2 and Digital Subscriber

Signalling System No. one (DSS1); Part 3: Test Suite Structure and Test

Purposes (TSS&TP) specification

76. EN 300 899-4 V1.1.1:2002 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);

Interworking between ISDN User Part (ISUP) version 2 and Digital Subscriber

Signalling System No. one (DSS1) protocols; Part 4: Abstract Test Suite (ATS)

and partial Protocol Implementation eXtra Information for Testing (PIXIT)

proforma specification

77. EN 301 160 V1.1.1:1998 Routeing of calls to European Telephony Numbering Space (ETNS) services

78. EN 301 161 V1.1.1:1998 Management of the European Telephony Numbering Space (ETNS)

79. EN 301 166 V1.1.1:1999 ElectroMagnetic Compatibility and Radio spectrum Matters (ERM); Land mobile

service; Technical characteristics and test conditions for radio equipment for analogue

and/or digital communication (speech and/or data) and operating on narrowband

channels and having an antenna connector

80. EN 301 166-2 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service;

Radio equipment for analogue and/or digital communication (speech and/or data) and

operating on narrow band channels and having an antenna connector; Part 2:

Harmonized EN covering essential requirements under article 3.2 of the R&TTE

Directive

81. EN 301 178 V1.1.1:1999 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical

characteristics and methods of measurement for portable Very High Frequency (VHF)

radiotelephone equipment for the maritime mobile service operating in the VHF bands

(for non-GMDSS applications only)

82. EN 301 178-2 V1.1.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable

Very High Frequency (VHF) radiotelephone equipment for the maritime

22

mobile service operating in the VHF bands (for non-GMDSS applications only);

Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

83. EN 301 192 V1.1.1:1997 Digital Video Broadcasting (DVB); DVB specification for data broadcasting

84. EN 301 215-3 V1.1.1:2001 Fixed Radio Systems; Point to Multipoint Antennas; Antennas for point-to-

multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 3:

Multipoint Multimedia Wireless System in 40,5 GHz to 43,5 GHz

85. EN 301 217-3 V1.1.1:2001 V interfaces at the digital Service Node (SN); Interfaces at the VB5.2 reference

point for the support of broadband or combined narrowband and broadband

Access Networks (ANs); Part 3: Test Suite Structure and Test Purposes

(TSS&TPP)



Access Networks (ANs); Part 4: Abstract Test Suite (ATS) and partial Protocol

Implementation eXtra Information for Testing (PIXIT)

87. EN 301 276-3 V1.1.1:2001 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber

Signalling System No. two (DSS2) protocol; Connection characteristics;

Modification procedures for sustainable cell rate parameters; Part 3: Test Suite

Structure and Test Purposes (TSS&TP) specification for the user



Modification procedures for sustainable cell rate parameters; Part 4: Abstract

Test Suite (ATS) and partial Protocol Implementation eXtra Information for

Testing (PIXIT) proforma specification for the user



Modification procedures for sustainable cell rate parameters; Part 5: Test Suite

Structure and Test Purposes (TSS&TP) specification for the network

90. EN 301 276-6 V1.1.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling

System No. two (DSS2) protocol; Connection characteristics; Modification procedures for

sustainable cell rate parameters; Part 6: Abstract Test Suite (ATS) and partial Protocol

Implementation eXtra Information for Testing (PIXIT) proforma specification for the

network

91. EN 301 357-2 V1.1.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); Analogue

cordless wideband audio devices using integral antennas operating in the CEPT

recommended 863 MHz to 865 MHz frequency range; Part 2: Harmonized EN

under article 3.2 of the R&TTE Directive

92. EN 301 390 V1.1.1:2000 Fixed Radio Systems; Point-to-point and Point-to-Multipoint Systems; Spurious

emissions and receiver immunity at equipment/antenna port of Digital Fixed Radio

Systems

93. EN 301 403 V1.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Mobile

Earth Stations (MMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and

direct printing for the Global Maritime Distress and Safety System (GMDSS); Technical

characteristics and methods of measurement

94. EN 301 484-1 V1.1.1:2000 Integrated Services Digital Network (ISDN); Line Hunting (LH) supplementary service;

Digital Subscriber Signalling System No. one (DSS1); Part 1: Protocol specification

95. EN 301 484-2 V1.1.1:2000 Integrated Services Digital Network (ISDN); Line Hunting (LH) supplementary

service; Digital Subscriber Signalling System No. one (DSS1); Part 2: Protocol

Implementation Conformance Statement (PICS) proforma specification

23


System No. one (DSS1); Line Hunting (LH) supplementary service; Part 3: Test

Suite Structure and Test Purposes (TSS&TP) specification for the user


System No. one (DSS1) protocol; Line Hunting (LH) supplementary service;

Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra

Information for Testing (PIXIT) proforma specification for the user


System No. one (DSS1); Line Hunting (LH) supplementary service; Part 5: Test

Suite Structure and Test Purposes (TSS&TP) specification for the network


System No. one (DSS1) protocol; Line Hunting (LH) supplementary service;


Information for Testing (PIXIT) proforma specification for the network


Signalling System No. two (DSS2) protocol; Connection characteristics; ATM

traffic descriptor modification with negotiation by the connection owner; Part 2:

Protocol Implementation Conformance Statement (PICS) proforma specification




Test Suite Structure and Test Purposes (TSS&TP) specification for the user




Abstract Test Suite (ATS) and partial Protocol Implementation eXtra





Test Suite Structure and Test Purposes (TSS&TP) specification for the network







Signalling No. two (DSS2) protocol; Switched virtual path capability; Part 1:

Protocol Specification [ITU-T Recommendation Q.2934 (1999), modified]


Signalling System No two (DSS2) protocol; B-ISDN user-network interface layer

3 specification for switched virtual path capability; Part 2: Protocol



Signalling System No. two (DSS2) protocol; Switched virtual path capability;



24



Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the

user



Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the

network





111. EN 301 489-11 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM);


services; Part 11: Specific conditions for analogue terrestrial sound broadcasting

(Amplitude Modulation (AM) and Frequency Modulation (FM)) service

transmitters



services; Part 14: Specific conditions for analogue and digital terrestrial TV

broadcasting service transmitters

113. EN 301 489-17 V1.1.1:2000 ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specific

conditions for Wideband data and HIPERLAN equipment

114. EN 301 489-22 V1.1.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic


conditions for ground based VHF aeronautical mobile and fixed radio equipment



services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread

(UTRA) Base Station (BS) radio, repeater and ancillary equipment



conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE)

radio and ancillary equipment



conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment

118. EN 301 489-7 V1.1.1:2000 ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic


conditions for mobile and portable radio and ancillary equipment of digital cellular

radio telecommunications systems (GSM and DCS)

119. EN 301 489-9 V1.1.1:2000 ElectroMagnetic compatibility and Radio spectrum Matters (ERM);


services; Part 9: Specific conditions for wireless microphones and similar Radio

Frequency (RF) audio link equipment

120. EN 301 649 V1.1.1:2000 Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio

Service (DPRS)

25

121. EN 301 657 V1.1.1:2000 Private Integrated Services Network (PISN); Specification, functional models

and information flows; Private User Mobility (PUM); Call handling Additional

Network Features (ANFs) [ISO/IEC 17877 (2000), modified]

122. EN 301 815-1 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling

System No. two (DSS2) protocol; Quality of Service Class and Parameters indication at

call/connection establishment; Part 1: Protocol specification [ITU-T Recommendations

Q.2965.1 (1999) and Q.2965.2 (1999), modified]


Signalling System No. two (DSS2) protocol; Quality of Service class and

parameters indication at call/connection establishment; Part 2: Protocol

Implementation Conformance Statement (PICS) proforma specification [ITU-T

Recommendations Q.2965.1B (2000) and Q.2965.2B (2000), modified]



parameters indication at call/connection establishment; Part 3: Test Suite

Structure and Test Purposes (TSS&TP) specification for the user



parameters indication at call/connection establishment; Part 4: Abstract Test

Suite (ATS) and partial Protocol Implementation eXtra Information for Testing

(PIXIT) proforma specification for the user



parameters indication at call/connection establishment; Part 5: Test Suite

Structure and Test Purposes (TSS&TP) specification for the network



parameters indication at call/connection establishment; Part 6: Abstract Test


(PIXIT) proforma specification for the network

128. EN 301 816-1 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); AAL Type 2

Signalling protocol; Capability Set 1; Part 1: Protocol specification [ITU-T

Recommendation Q.2630.1 (1999), modified]


Signalling protocol; Capability Set 1; Part 2: Protocol Implementation

Conformance Statement (PICS) proforma specification


Signalling protocol; Capability Set 1; Part 3: Test Suite Structure and Test

Purposes (TSS&TP) specification


and information flows; Private User Mobility (PUM); Registration

supplementary service [ISO/IEC 17875 (2000), modified]

132. EN 301 823-2-3 V1.1.1:2001 Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance

testing for the Data Link Control (DLC) protocol; Part 2: Radio Link Control

(RLC) sublayer; Sub-part 3: Abstract Test Suite (ATS) specification

133. EN 301 824 V1.1.1:2003 Private Integrated Services Network (PISN); Specification, functional model

and information flows; Wireless terminal location registration supplementary

26

service and wireless terminal information exchange additional network feature

[ISO/IEC 15428 (1999) modified]

134. EN 301 825 V1.1.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;

Wireless terminal location registration supplementary service and wireless

terminal information exchange Additional Network Feature (ANF) [ISO/IEC

15429 (2003), modified]


and information flows; Wireless terminal call handling additional network

features [ISO/IEC 15430 (1999) modified]


Wireless terminal call handling Additional Network Feature (ANF) [ISO/IEC

15431 (2003), modified]


and information flows; Wireless terminal authentication supplementary

services [ISO/IEC 15432 (1999) modified]


Wireless terminal authentication supplementary service [ISO/IEC 15433 (2003),

modified]

139. EN 301 839-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio

equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power

Active Medical Implants and Accessories; Part 1: Technical characteristics,

including electromagnetic compatibility requirements, and test methods


equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power

Active Medical Implants and Accessories; Part 2: Harmonized EN covering


141. EN 301 841-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-

ground Digital Link (VDL) Mode 2; Technical characteristics and methods of

measurement for ground-based equipment; Part 1: Physical layer


ground Digital Link (VDL) Mode 2; Technical characteristics and methods of

measurement for ground-based equipment; Part 2: Upper layers

143. EN 301 843-2 V1.1.1:2001 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific

conditions for radiotelephone transmitters and receivers


ElectroMagnetic Compatibility (EMC) standard for marine radio equipment

and services; Part 1: Common technical requirements


Compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific

conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers

146. EN 301 846 V1.1.1:2001 Private Integrated Services Network (PISN); Profile Standard for the use of

PSS1 (QSIG) in Air Traffic Services networks


Bearer Independent Call Control (BICC); Signalling procedures in an ATM/IP/..

backbone network; Capability Set 1 (CS1); Part 1: Protocol specification [ITU-T

Recommendations Q.1901 and Q.765.5, modified]

27


ISDN User Part (ISUP); Application transport mechanism; Support of the

generic addressing and transport protocol; Part 1: Protocol specification [ITU-T

Recommendation Q.765.4, modified)

149. EN 301 905 V1.1.1:2003 Corporate telecommunication Networks (CN); Signalling interworking

between QSIG and H.323; Generic functional protocol for the support of

supplementary services [ISO/IEC 21409 (2001) modified]


between QSIG and H.323; Call Diversion supplementary services [ISO/IEC

21411 (2001) modified]


between QSIG and H.323; Call transfer supplementary service [ISO/IEC 21410

(2001), modified]

152. EN 301 908-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base

Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation cellular

networks; Part 1: Harmonized EN for IMT-2000, introduction and common

requirements, covering essential requirements of article 3.2 of the R&TTE

Directive



networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA

FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive



networks; Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA

FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive

155. EN 301 908-4 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS)

and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4:

Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential

requirements of article 3.2 of the R&TTE Directive



networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier

(cdma2000) (BS) covering essential requirements of article 3.2 of the R&TTE

Directive



networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD)

(UE) covering essential requirements of article 3.2 of the R&TTE Directive



networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD)

(BS) covering essential requirements of article 3.2 of the R&TTE Directive



networks; Part 10: Harmonized EN for IMT-2000 FDMA/TDMA (DECT)

covering essential requirements of article 3.2 of the R&TTE Directive

28

160. EN 301 914 V1.1.1:2004 Private Integrated Services Network (PISN); Use of QSIG at the C reference

point between a PINX and an interconnecting network [ISO/IEC 20161 (2001),

modified]


and information flows; Single step call transfer supplementary service [ISO/IEC

19459 (2001) modified]


Single step call transfer supplementary service [ISO/IEC 19460 (2003), modified]


and information flows; Simple Dialog supplementary service [ISO/IEC 21407

(2001) modified]


Simple dialog supplementary service [ISO/IEC 21408 (2003), modified]


and information flows; Call identification and call linkage additional network

features (ANF) [ISO/IEC 21888 (2001) modified]


Call identification and call linkage Additional Network Feature (ANF) [ISO/IEC

21889 (2001), modified]

167. EN 301 924 V1.1.1:2002 Private Integrated Services Network (PISN); Mapping functions for the

employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-

multiplexing [ISO/IEC 17311 (2002) modified]

168. EN 301 925 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM);

Radiotelephone transmitters and receivers for the maritime mobile service

operating in VHF bands; Technical characteristics and methods of

measurement

169. EN 301 927 V1.1.1:2003 Satellite Earth Stations and Systems (SES); European Co-operation for Space

Standardization (ECSS); Satellite Software Data Handling Interfaces (SSDHI)

170. EN 301 929-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF

transmitters and receivers as Coast Stations for GMDSS and other applications

in the maritime mobile service; Part 1: Technical characteristics and methods of

measurement

171. EN 301 929-2 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF

transmitters and receivers as Coast Stations for GMDSS and other applications

in the maritime mobile service; Part 2: Harmonized EN under article 3.2 of the

R&TTE Directive

172. EN 301 933-1 V1.1.1:2003 Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent

Network Application Protocol (INAP); Test Suite Structure and Test Purposes

(TSS&TP) specification for Service Switching Function (SSF); Part 1: Basic

capability set of CS3

173. EN 301 933-2 V1.1.1:2003 Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network

Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP)

specification for Service Switching Function (SSF); Part 2: Call Party Handling (CPH)


Network Application Protocol (INAP); Test Suite Structure and Test Purposes

(TSS&TP) specification for Service Switching Function (SSF); Part 3: Specialized

Resource Function (SRF)

29

175. EN 301 934-1 V1.1.1:2003 Intelligent Network (IN); Intelligent Network Capability Set 3 (CS-3); Abstract

Test Suite (ATS) and Partial Protocol Implementation eXtra Information for

Testing (PIXIT) proforma specification; Part 1: Basic capability set of CS3

176. EN 301 934-2 V1.1.1:2003 Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Abstract

Test Suite (ATS) and Partial Protocol Implementation eXtra Information for

Testing (PIXIT) proforma specification; Part 2: Call Party Handling (CPH)

177. EN 301 937 V1.1.1:2002 Services and Protocols for Advanced Networks (SPAN); Number portability for

ETNS services


between QSIG and H.323; Call Completion supplementary services [ISO/IEC

21991 (2002) modified]


and information flows; Short message service supplementary service [ISO/IEC

21989 (2002) modified]


Short message service [ISO/IEC 21990 (2002) modified]


Transmitting equipment for the Frequency Modulated (FM) sound

broadcasting service; Part 1: Technical characteristics and test methods

182. EN 302 018-2 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting

equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2:

Harmonized EN under article 3.2 of the R&TTE Directive




Terminal Mobility (CTM) phase 1; Part 3: Test Suite Structure and Test

Purposes (TSS&TP) specification for the user




Terminal Mobility (CTM) phase 1; Part 4: Abstract Test Suite (ATS) and partial

Protocol Implementation eXtra Information for Testing (PIXIT) proforma

specification for the user

185. EN 302 094-5 V1.1.1 :2001 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling



Terminal Mobility (CTM) phase 1; Part 5: Test Suite Structure and Test

Purposes (TSS&TP) specification for the network




Terminal Mobility (CTM) phase 1; Part 6: Abstract Test Suite (ATS) and partial


specification for the network

187. EN 302 099 V1.1.1:2002 Environmental Engineering (EE); Powering of equipment in access network


Frequency Identification Equipment operating in the band 865 MHz to 868

30

MHz with power levels up to 2 W; Part 2: Harmonized EN under article 3.2 of

the R&TTE Directive

189. EN 302 583 V1.1.1:2008 Digital Video Broadcasting (DVB); Framing Structure, channel coding and

modulation for Satellite Services to Handheld devices (SH) below 3 GHz


ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical

characteristics and methods of measurement for aeronautical mobile (airborne)

equipment; Part 2: General description and data link layer




equipment; Part 3: Additional broadcast aspects




equipment; Part 4: Point-to-point functions

193. EN 300 632 V1.2.1:2002 Transmission and Multiplexing (TM); Fixed radio link equipment for the

transmission of analogue video signals operating in the frequency bands 24,25

GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz

194. EN 300 650 V1.2.1:2001 Integrated Services Digital Network (ISDN); Message Waiting Indication

(MWI) supplementary service; Service description

195. EN 300 676 V1.2.1:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Ground-

based VHF hand-held, mobile and fixed radio transmitters, receivers and

transceivers for the VHF aeronautical mobile service using amplitude

modulation; Technical characteristics and methods of measurement

196. EN 300 698-1 V1.2.1:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Radio


in the VHF bands used on inland waterways; Part 1: Technical characteristics

and methods of measurement

197. EN 300 706 V1.2.1:2003 Enhanced Teletext specification

198. EN 300 707 V1.2.1:2003 Electronic Programme Guide (EPG); Protocol for a TV Guide using electronic

data transmission

199. EN 300 708 V1.2.1:2003 Television systems; Data transmission within Teletext

200. EN 300 718-1 V1.2.1:2001 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Avalanche Beacons;

Transmitter-receiver systems; Part 1: Technical characteristics and test methods

201. EN 300 743 V1.2.1:2002 Digital Video Broadcasting (DVB); Subtitling systems

202. EN 300 751 V1.2.1:2003 Radio broadcasting systems; DAta Radio Channel (DARC); System for wireless

infotainment forwarding and teledistribution

203. EN 300 757 V1.2.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging

Service (LRMS) including Short Messaging Service (SMS)

204. EN 300 765-2 V1.2.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Radio in the Local

Loop (RLL) Access Profile (RAP); Part 2: Advanced telephony services

205. EN 301 160 V1.2.1:2002 Routeing of calls to European Telephony Numbering Space (ETNS) services

206. EN 301 161 V1.2.1:2002 Management of the European Telephony Numbering Space (ETNS)



31


Part 1: Technical characteristics and methods of measurement



and information flows; Advice of charge supplementary services [ISO/IEC

15049 (1997) modified]

210. EN 301 271 V1.2.1:2001 Telecommunications Management Network (TMN); Management interfaces

associated with the VB5.1 reference point;

211. EN 301 357-1 V1.2.1:2001 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Cordless

audio devices in the range 25 MHz to 2 000 MHz; Consumer radio microphones

and in-ear monitoring systems operating in the CEPT harmonized band 863

MHz to 865 MHz; Part 1: Technical characteristics and test methods

212. EN 301 357-2 V1.2.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless

audio devices in the range 25 MHz to 2 000 MHz; Consumer radio microphones

and in-ear monitoring systems operating in the CEPT harmonized band 863

MHz to 865 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE

Directive

213. EN 301 390 V1.2.1:2003 Fixed Radio Systems; Point-to-point and Multipoint Systems; Spurious

emissions and receiver immunity limits at equipment/antenna port of Digital

Fixed Radio Systems

214. EN 301 428 V1.2.1:2001 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only

satellite earth stations operating in the 11/12/14 GHz frequency bands covering

essential requirements under article 3.2 of the R&TTE directive

215. EN 301 443 V1.2.1:2001 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only

satellite earth stations operating in the 4 GHz and 6 GHz frequency bands

covering essential requirements under article 3.2 of the R&TTE Directive

216. EN 301 453-2 V1.2.1:2002 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;

Diversion supplementary services; Part 2: Abstract Test Suite (ATS) and partial


specification


Advice of Charge (AoC) supplementary services; Part 2: Abstract Test Suite

(ATS) and partial Protocol Implementation eXtra Information for Testing

(PIXIT) proforma specification



services; Part 10: Specific conditions for First (CT1 and CT1+) and Second

Generation Cordless Telephone (CT2) equipment



services; Part 11: Specific conditions for terrestrial sound broadcasting service

transmitters



services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite

32

Interactive Earth Stations operated in the frequency ranges between 4 GHz and

30 GHz in the Fixed Satellite Service (FSS)



services; Part 17: Specific conditions for 2,4 GHz wideband transmission

systems and 5 GHz high performance RLAN equipment



services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA)

equipment



services; Part 22: Specific conditions for ground based VHF aeronautical mobile

and fixed radio equipment








(UTRA) for Mobile and portable (UE) radio and ancillary equipment



services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on

frequencies between 9 kHz and 40 GHz



services; Part 4: Specific conditions for fixed radio links and ancillary

equipment and services



services; Part 7: Specific conditions for mobile and portable radio and ancillary

equipment of digital cellular radio telecommunications systems (GSM and DCS



services; Part 9: Specific conditions for wireless microphones, similar Radio

Frequency (RF) audio link equipment, cordless audio and in-ear monitoring

devices


Call transfer supplementary service for the VPN "b" service entry point; Part 2:


Information for Testing (PIXIT) proforma


Call offer supplementary service; Part 2: Abstract Test Suite (ATS) and partial


specification

33

232. EN 301 492-2 V1.2.1:2002 Private Integrated Services network (PISN); Inter-exchange signalling protocol;

Cordless terminal authentication supplementary services; Part 2: Abstract Test


(PIXIT) proforma specification for the VPN "b" service entry point


Service (DPRS)


and information flows; Call priority interruption and call priority interruption

protection supplementary service [ISO/IEC 15991 (2003), modified]


Call priority interruption and call priority interruption protection

supplementary services [ISO/IEC 15992 (2003), modified]


and information flows; Private User Mobility (PUM); Call handling Additional

Network Features (ANFs) [ISO/IEC 17877 (2000) modified]

237. EN 301 681 V1.2.1:2001 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth

Stations (MESs) of Geostationary mobile satellite systems, including handheld

earth stations, for Satellite Personal Communications Networks (S-PCN) in the

1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering essential

requirements under Article 3.2 of the R&TTE Directive

238. EN 301 744 V1.2.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence Code

Division/Time Division Multiple Access (DS-CD/TDMA); Point-to-multipoint

digital packet radio systems in frequency bands in the range 3 GHz to 11 GHz

239. EN 301 839-1 V1.2.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and


MHz; Part 1: Technical characteristics and test methods

240. EN 301 839-2 V1.2.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices

(SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and Peripherals (ULP-

AMI-P) operating in the frequency range 402 MHz to 405 MHz; Part 2: Harmonized EN


241. EN 301 841-1 V1.2.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground

Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for

ground-based equipment; Part 1: Physical layer and MAC sub-layer

242. EN 301 925 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone

transmitters and receivers for the maritime mobile service operating in VHF bands;

Technical characteristics and methods of measurement

243. EN 301 926 V1.2.1:2002 Satellite Earth Stations and Systems (SES); Radio Frequency and Modulation

Standard for Telemetry, Command and Ranging (TCR) of Geostationary

Communications Satellites

244. EN 301 929-1 V1.2.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF transmitters

and receivers as Coast Stations for GMDSS and other applications in the maritime

mobile service; Part 1: Technical characteristics and methods of measurement

245. EN 302 217-1 V1.2.1:2007 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment

and antennas; Part 1: Overview and system-independent common characteristics

246. EN 302 217-2-1 V1.2.1:2007 Fixed Radio Systems; Characteristics and requirements for point-to-point

equipment and antennas; Part 2-1: System-dependent requirements for digital

systems operating in frequency bands where frequency co-ordination is applied

34

247. EN 302 217-3 V1.2.1:2008 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment

and antennas; Part 3: Harmonized EN covering essential requirements of article 3.2 of

R&TTE Directive for equipment operating in frequency bands where simplified or no

frequency co-ordination procedures are applied

248. EN 302 217-4-1 V1.2.1:2007 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment

and antennas; Part 4-1: System-dependent requirements for antennas


equipment and antennas; Part 4-2: Harmonized EN covering essential

requirements of Article 3.2 of R&TTE Directive for antennas

250. EN 302 842-1 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground and air-air

Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of

measurement for aeronautical mobile (airborne) equipment; Part 1: Physical layer

251. EN 302 842-2 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground and

air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and

methods of measurement for aeronautical mobile (airborne) equipment; Part 2: General

description and data link layer




equipment; Part 3: Additional broadcast aspects




equipment; Part 4: Point-to-point functions

254. EN 300 676 V1.3.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-



modulation; Part 1:Technical characteristics and methods of measurement








258. EN 300 765-1 V1.3.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Radio in the Local

Loop (RLL) Access Profile (RAP); Part 1: Basic telephony services

259. EN 300 824 V1.3.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal

Mobility (CTM); CTM Access Profile (CAP)

260. EN 301 178-1 V1.3.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High

Frequency (VHF) radiotelephone equipment for the maritime mobile service operating

in the VHF bands (for non-GMDSS applications only); Part 1: Technical characteristics



262. EN 301 238 V1.3.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);

Isochronous data bearer services with roaming mobility (service type D, mobility class 2)


audio devices in the range 25 MHz to 2 000 MHz; Part 1: Technical

characteristics and test methods

35


audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN


265. EN 301 454-2 V1.3.1 :2002 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;

Cordless Terminal Location Registration (CTLR) supplementary service;

ECMA-QSIG-CTLR; Part 2: Abstract Test Suite (ATS) and partial Protocol

Implementation eXtra Information for Testing (PIXIT) proforma specification



services; Part 1: Common technical requirements











services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on

frequencies between 9 kHz and 40 GHz



services; Part 4: Specific conditions for fixed radio links and ancillary

equipment and services



conditions for wireless microphones, similar Radio Frequency (RF) audio link

equipment, cordless audio and in-ear monitoring devices


Service (DPRS)

273. EN 301 839-1 V1.3.1:2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and


MHz; Part 1: Technical characteristics and test methods

274. EN 301 841-1 V1.3.1:2010 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and

methods of measurement for ground-based equipment; Part 1: Physical layer

and MAC sub-layer

275. EN 301 893 V1.3.1:2005 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;

Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

276. EN 301 925 V1.3.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone

transmitters and receivers for the maritime mobile service operating in VHF bands;

Technical characteristics and methods of measurement

277. EN 302 217-1 V1.3.1:2010 Fixed Radio Systems; Characteristics and requirements for point-to-point

equipment and antennas; Part 1: Overview and system-independent common

characteristics

36





equipment and antennas; Part 4-1: System-dependent requirements for

antennas




281. EN 300 676-1 V1.4.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-



modulation; Part 1: Technical characteristics and methods of measurement

282. EN 300 676-2 V1.4.1:2010 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers

and transceivers for the VHF aeronautical mobile service using amplitude

modulation; Part 2: Harmonized EN covering essential requirements of article

3.2 of the R&TTE Directive






285. EN 300 757 V1.4.1;2002 Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging


286. EN 301 033 V1.4.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical

characteristics and methods of measurement for shipborne watchkeeping

receivers for reception of Digital Selective Calling (DSC) in the maritime MF,

MF/HF and VHF bands




Part 1: Technical characteristics and methods of measurement



audio devices in the range 25 MHz to 2 000 MHz; Part 1: Technical


290. EN 301 406 V1.4.1:2001 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for

Digital Enhanced Cordless Telecommunications (DECT) covering essential

requirements under article 3.2 of the R&TTE Directive; Generic radio

291. EN 301 451-2 V1.4.1:2002 Private Integrated Services Network (PISN); Cordless Terminal Mobility (CTM); Inter-

exchange signalling protocol; Cordless terminal outgoing call additional network feature

for the VPN "b" service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol



Call completion supplementary service for the VPN "b" service entry point; Part

2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra

Information for Testing (PIXIT) proforma specification

37


Cordless Terminal Mobility (CTM); Incoming call additional network feature for the

VPN "b" service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol







conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS)

radio, repeater and ancillary equipment






Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive




equipment and antennas; Part 4-2: Antennas; Harmonized EN covering the








303. EN 301 406 V1.5.1:2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for

Digital Enhanced Cordless Telecommunications (DECT) covering essential

requirements under article 3.2 of the R&TTE Directive; Generic radio





Harmonized EN covering the essential requirements of article 3.2 of the R&TTE

Directive





Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements

308. EN 301 649 V2.1.1:2010 Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service

(DPRS)

309. EN 301 908-10 V2.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS),

Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks;

Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential


38



services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile

Stations and ancillary equipment



services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base

Stations and ancillary equipment


Service (DPRS)


Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-

Generation cellular networks; Part 1: Harmonized EN for IMT-2000,

introduction and common requirements, covering essential requirements of

article 3.2 of the R&TTE Directive



Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA

Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2

of the R&TTE Directive




Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of

the R&TTE Directive




Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of

the R&TTE Directive




Multi-Carrier (cdma2000) (BS and Repeaters) covering essential requirements of





TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the

R&TTE Directive




TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the

R&TTE Directive



39


Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of





Multi-Carrier (cdma2000) (Repeaters) covering essential requirements of article

3.2 of the R&TTE Directive




introduction and common requirements, covering essential requirements of





Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2

of the R&TTE Directive




Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of

the R&TTE Directive




Multi-Carrier (cdma2000) (BS) covering essential requirements of article 3.2 of

the R&TTE Directive




TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the

R&TTE Directive



Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential





Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of





introduction and common requirements, covering the essential requirements of


40




Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering the essential





Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering the essential





Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile

Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the

R&TTE Directive




Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile

Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the

R&TTE Directive




TDD (UTRA TDD and E-UTRA TDD) (UE) covering the essential requirements

of article 3.2 of the R&TTE Directive



Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS)

covering the essential requirements of article 3.2 of the R&TTE Directive



Part 13: Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-

UTRA) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive




UTRA) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive




UTRA) (FDD Repeaters) covering the essential requirements of article 3.2 of the R&TTE

Directive

339. EN 300 919 V6.1.1:999 Digital cellular telecommunications system (Phase 2+) (GSM); Types of Mobile

Stations (MS) (GSM 02.06 version 6.1.1 Release 1997)

340. EN 300 959 V6.1.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); Modulation

(GSM 05.04 version 6.1.1 Release 1997)

41

341. EN 300 912 V6.6.1:2001 Digital cellular telecommunications system (Phase 2+); Radio subsystem

synchronization (GSM 05.10 version 6.6.1 Release 1997)



343. EN 302 403 V7.2.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); GSM Cordless

Telephony System (CTS), Phase 1; Service description; Stage 1 (GSM 02.56

version 7.2.1 Release 1998)

344. EN 300 912 V7.3.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem


345. EN 301 707 V7.3.1:2001 Digital cellular telecommunications system (Phase 2+) (GSM); Discontinuous

Transmission (DTX) for Adaptive Multi-Rate (AMR) speech traffic channels


346. EN 300 912 V8.3.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem


347. EN 301 178-1 V1.1.2:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Portable Very High

Frequency (VHF) radiotelephone equipment for the maritime mobile service operating

in the VHF bands (for non-GMDSS applications only); Part 1: Technical characteristics


348. EN 301 357-1 V1.1.2:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Analogue

cordless wideband audio devices using integral antennas operating in the CEPT

recommended 863 MHz to 865 MHz frequency range; Part 1: Technical


349. EN 301 384 V1.1.2:2001 Telecommunications Management Network (TMN); Performance monitoring

for Plesiochronous Digital Hierarchy (PDH) interfaces; Information model for

the Network Element (NE) view


Diversion supplementary services [ISO/IEC 13873 (1995) modified]; Part 1: Test

Suite Structure and Test Purposes (TSS&TP) specification


Call transfer supplementary service for the VPN "b" service entry point; Part 1:

Test Suite Structure and Test Purposes (TSS&TP) specification


Call offer supplementary service; Part 1: Test Suite Structure and Test Purposes

(TSS&TP) specification


Cordless terminal authentication supplementary services; Part 1: Test Suite Structure

and Test Purposes (TSS&TP) specification for the VPN "b" service entry point

354. EN 301 682 V1.1.2:2001 Satellite Personal Communications Networks (S-PCN); Network Control

Facilities (NCF) for Mobile Earth Stations (MESs), including handheld earth

stations, for S-PCN in the 1,5/1,6 GHz bands, providing voice and/or data

communications under the Mobile Satellite Service (MSS)


Signalling Protocol; Capability Set 1; Part 4: Abstract Test Suite (ATS) and

partial Protocol Implementation eXtra Information for Testing (PIXIT)

proforma specification


Application Protocol (INAP); Protocol specification; Part 2: SCF-SSF interface

42


Network Application Protocol (INAP); Protocol specification; Part 3: SCF-SRF

interface


Application Protocol (INAP); Protocol specification; Part 4: SDLs for SCF-SSF interface

359. EN 302 213 V1.1.2:2004 Services and Protocols for Advanced Networks (SPAN); Bearer Independent

Call Control (BICC) Capability Set 2 (CS2); Protocol specification [ITU-T

Recommendations Q.1902.1, Q.1902.2, Q.1902.3, Q.1902.4, Q.1902.5, Q.1902.6,

Q.765.5 Amendment 1, Q.1912.1, Q.1912.2, Q.1912.3, Q.1912.4, Q.1922.2, Q.1950,

Q.1970, Q.1990, Q.2150.0, Q.2150.1, Q.2150.2, Q.2150.3, modified]

360. EN 302 583 V1.1.2:2010 Digital Video Broadcasting (DVB); Framing Structure, channel coding and

modulation for Satellite Services to Handheld devices (SH) below 3 GHz

361. EN 300 632 V1.2.2:2002 Transmission and Multiplexing (TM); Fixed radio link equipment for the

transmission of analogue video signals operating in the frequency bands 24,25

GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz



Access Networks (ANs); Part 1: Interface specification

363. EN 301 473 V1.2.2:2001 Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES)

operating under the Aeronautical Mobile Satellite Service (AMSS)/Mobile

Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route

Service (AMS(R)S)/Mobile Satellite Service (MSS)


Advice of Charge (AoC) supplementary services [ISO/IEC 15049 (1997),

modified]; Part 1: Test Suite Structure and Test Purposes (TSS&TP)

specification

365. EN 301 814 V1.2.2:2002 ETSI endorsement of ATM Inter-Network Interface (AINI) signalling

specification [ATM Forum Specification ATM Inter-Network Interface (AINI) F-

CS-0125.000 (1999), modified]

366. EN 302 842-1 V1.2.2:2010 VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment;

Technical characteristics and methods of measurement for aeronautical mobile

(airborne) equipment; Part 1: Physical layer



(airborne) equipment; Part 4: Point-to-point functions


Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 2,4

GHz wideband transmission systems, 5 GHz high performance RLAN equipment and

5,8 GHz Broadband Data Transmitting Systems

369. EN 301 681 V1.3.2:2003 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations

(MESs) of Geostationary mobile satellite systems, including handheld earth stations, for

Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under

the Mobile Satellite Service (MSS) covering essential requirements under article 3.2 of

the R&TTE Directive





43




TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the

R&TTE Directive

373. EN 300 918 V7.1.2:1999 Digital cellular telecommunications system (Phase 2+) (GSM); General on

supplementary services (GSM 02.04 version 7.1.2 Release 1998)



375. EN 301 502 V8.1.2:2001

Harmonized EN for Global System for Mobile communications (GSM); Base

Station and Repeater equipment covering essential requirements under article

3.2 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999)



Access Networks (ANs); Part 2: Protocol Implementation Conformance

Statement (PICS) proforma specification

377. EN 301 165 V1.1.3:2002 Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH);

SDH leased lines; Network and terminal interface presentation

378. EN 301 239 V1.1.3:1998 Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);

Isochronous data bearer services for closed user groups (service type D, mobility class 1)



Modification procedures for sustainable cell rate parameters; Part 1: Protocol

specification [ITU-T Recommendation Q.2963.2 (1997), modified]



Modification procedures for sustainable cell rate parameters; Part 2: Protocol


381. EN 301 360 V1.1.3:2001 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite

Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting

towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands

covering essential requirements under article 3.2 of the R&TTE Directive




Protocol specification [ITU-T Recommendation Q.2963.3, modified]




Terminal Mobility (CTM) phase 1; Part 2: Protocol Implementation

Conformance Statement (PICS) proforma specification



characteristics




44



requirements of Article 3.2 of R&TTE Directive for digital systems operating in

frequency bands where frequency co-ordination is applied


equipment and antennas; Part 3: Harmonized EN covering essential

requirements of Article 3.2 of R&TTE Directive for equipment operating in

frequency bands where no frequency co-ordination is applied







Harmonized EN covering essential requirements of article 3.2 of the R&TTE

Directive



requirements of Article 3.2 of R&TTE Directive for digital systems operating in

frequency bands where frequency co-ordination is applied

392. EN 301 451-1 V1.1.4:2000 Private Integrated Services Network (PISN); Cordless Terminal Mobility

(CTM); Inter-exchange signalling protocol; Cordless terminal outgoing call

additional network feature (ANF-CTMO) for the VPN b service entry point;

Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification


Call completion supplementary service for the VPN b service entry point; Part

1: Test Suite Structure and Test Purposes (TSS&TP) specification


Cordless Terminal Location Registration (CTLR) supplementary service; Part 1:

Test Suite Structure and Test Purposes (TSS&TP) specification

395. EN 301 455-1 V1.1.4 :2000 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;

Cordless Terminal Incoming Call additional network feature (ANF-CTMI) for

the VPN b service entry point; Part 1: Test Suite Structure and Test Purposes

(TSS&TP) specification



characteristics



(airborne) equipment; Part 1: Physical layer

398. EN 301 515 V1.0.1:2001 Global System for Mobile communication (GSM); Requirements for GSM

operation on railways



conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment

400. EN 300 919 V6.0.1:1999 Digital cellular telecommunications system (Phase 2+) (GSM); Types of Mobile Stations

(MS) (GSM 02.06 version 6.0.1 Release 1997)

45

401. EN 300 919 V7.0.1:1999 Digital cellular telecommunications system (Phase 2+) (GSM); Types of Mobile

Stations (MS) (GSM 02.06 version 7.0.1 Release 1998)

402. EN 301 511 V7.0.1:2000 Global System for Mobile communications (GSM); Harmonized standard for

mobile stations in the GSM 900 and DCS 1800 bands covering essential

requirements under article 3.2 of the R&TTE directive (1999/5/EC) (GSM 13.11

version 7.0.1 Release 1998)

403. EN 301 502 V8.0.1:2001 Harmonized EN for Global System for Mobile communications (GSM); Base

Station and Repeater equipment covering essential requirements under article

3.2 of the R&TTE directive (GSM 13.21 version 8.0.1 Release 1999)


“Metrology and measurements”, 13 standards


1. CEN/TR 16911:2015 Heat meters - Recommendations for circulation water in industrial and district

heating systems and their operation

2. EN 12405-3:2015 Gas meters - Conversion devices - Part 3: Flow computer

3. EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment -

Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)

4. EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606:

Nominal characteristics of non-contact (focus variation) instruments (ISO

25178-606:2015)

5. EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of

workpieces and measuring equipment - Part 5: Uncertainty in verification

testing of indicating measuring instruments (ISO 14253-5:2015)

6. EN ISO 16610-49:2015 Geometrical product specifications (GPS) - Filtration - Part 49: Morphological

profile filters: Scale space techniques (ISO 16610-49:2015)


profile filters: Basic concepts (ISO 16610-40:2015)


profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)

9. EN ISO 16610-22:2015 Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile

filters: Spline filters (ISO 16610-22:2015)

10. EN ISO 16610-60:2015 Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal

filters: Basic concepts (ISO 16610-60:2015)

11. EN ISO 16610-61:2015 Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters

- Gaussian filters (ISO 16610-61:2015)

12. EN 13757-5:2015 Communication systems for meters - Part 5: Wireless M-Bus relaying

13. EN 13757-6:2015 Communication systems for meters - Part 6: Local Bus

46

Technical Committee No. 19 “Petroleum products, lubricants and related products”, 26 standards


1. EN ISO 19901-1:2015 Petroleum and natural gas industries - Specific requirements for offshore

structures - Part 1: Metocean design and operating considerations

2. CEN ISO/TR 12489:2016 Petroleum, petrochemical and natural gas industries - Reliability modelling and

calculation of safety systems (ISO/TR 12489:2013)

3. EN ISO 15156-1:2015 Petroleum and natural gas industries - Materials for use in H2S-containing

environments in oil and gas production - Part 1: General principles for selection

of cracking-resistant materials (ISO 15156-1:2015)


environments in oil and gas production - Part 2: Cracking-resistant carbon and

low alloy steels, and the use of cast irons (ISO 15156-2:2015)


environments in oil and gas production - Part 3: Cracking-resistant CRAs

(corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)

6. CEN ISO/TS 16530-2:2015 Well integrity - Part 2: Well integrity for the operational phase

7. EN ISO 19905-1:2016 Petroleum and natural gas industries - Site-specific assessment of mobile

offshore units - Part 1: Jack-ups (ISO 19905-1:2016)

8. EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas

chromatography method - Part 4: Light fractions of crude oil

9. CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance

correlation

10. EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates

- High performance liquid chromatography method with refractive index detection

11. EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel

by gas chromatography - Part 1: Method using single column technique

12. EN ISO 4263-3:2015 Petroleum and related products - Determination of the ageing behaviour of

inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for

synthetic hydraulic fluids (ISO 4263-3:2015)

13. CEN/TR 16885:2015 Liquid petroleum products - Investigation on test method for measurement of the

oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing

14. EN ISO 20844:2015 Petroleum and related products - Determination of the shear stability of

polymer-containing oils using a diesel injector nozzle (ISO 20844:2015)

15. EN 16761-2:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel

by gas chromatography - Part 2: Method using heart cut technique

16. EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of

performance of hot water deliveries

17. EN 16436-1:2014+A1:2015 Rubber and plastics hoses, tubing and assemblies for use with propane and

butane and their mixture in the vapour phase - Part 1: Hoses and tubings

18. EN ISO 18134-1:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 1:

Total moisture - Reference method (ISO 18134-1:2015)

19. EN ISO 17831-2:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes

- Part 2: Briquettes (ISO 17831-2:2015)

47

20. EN ISO 18122:2015 Solid biofuels - Determination of ash content (ISO 18122:2015)

21. EN ISO 17831-1:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes

- Part 1: Pellets (ISO 17831-1:2015)


Total moisture - Simplified method (ISO 18134-2:2015)


Moisture in general analysis sample (ISO 18134-3:2015)

24. EN ISO 18123:2015 Solid biofuels - Determination of the content of volatile matter (ISO 18123:2015)

25. EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)

26. EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets


“Chemistry”, 30 standards


1. EN 13727:2012+A2:2015 Chemical disinfectants and antiseptics - Quantitative suspension test for the

evaluation of bactericidal activity in the medical area - Test method and

requirements (phase 2, step 1)

2. EN 16847:2016 Fertilizers - Determination of complexing agents in fertilizers - Identification of

heptagluconic acid by chromatography

3. EN 16319:2013+A1:2015 Fertilizers and liming materials - Determination of cadmium, chromium, lead

and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-

AES) after aqua regia dissolution

4. EN 16318:2013+A1:2016 Fertilizers and liming materials - Determination of chromium(VI) by photometry

(method A) and by ion chromatography with spectrophotometric detection (method B)

5. EN ISO 4796-1:2016 Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2016)

6. EN ISO 4797:2015 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015)

7. EN ISO 3819:2015 Laboratory glassware - Beakers (ISO 3819:2015)

8. EN ISO 16496:2016 Laboratory glassware - Vacuum-jacketed vessels for heat insulation

9. EN ISO 384:2015 Laboratory glass and plastics ware - Principles of design and construction of

volumetric instruments (ISO 384:2015)

10. EN 10361:2015 Alloyed steels - Determination of nickel content - Inductively coupled plasma

optical emission spectrometric method

11. ISO 4319:1977 Surface active agents - Detergents for washing fabrics - Guide for comparative

testing of performance

12. ISO 697:1981 Surface active agents - Washing powders - Determination of apparent density -

Method by measuring the mass of a given volume

13. ISO 4324:1977 Surface active agents - Powders and granules - Measurement of the angle of repose

14. ISO 7535:1984 Surface active agents - Detergents for domestic machine dishwashing - Guide

for comparative testing of performance

15. ISO 758:1976 Liquid chemical products for industrial use - Determination of density at 20

degrees C

48

16. ISO 697:1981 Surface active agents - Washing powders - Determination of apparent density -

Method by measuring the mass of a given volume

17. ISO 6228:1980 Chemical products for industrial use - General method for determination of

traces of sulphur compounds, as sulphate, by reduction and titrimetry

18. ISO 4321:1977 Washing powders - Determination of active oxygen content - Titrimetric

method

19. ISO 2462:1973 Sodium chlorate for industrial use - Determination of moisture content -

Gravimetric method

20. ISO 1691:1976 Sodium and potassium silicates for industrial use - Determination of carbonates

content - Gas-volumetric method

21. ISO 6387:1983 Surface active agents -Determination of the power to disperse calcium soap -

Acidimetric method (Modified Schoenfeldt method)

22. ISO 456:1973 Surface active agents - Analysis of soaps - Determination of free caustic alkali

23. ISO 673:1981 Soaps - Determination of content of ethanol-insoluble matter

24. ISO 684:1974 Analysis of soaps -Determination of total free alkali

25. ISO 685:1975 Analysis of soaps - Determination of total alkali content and total fatty matter

content

26. ISO 1066:1975 Analysis of soaps - Determination of glycerol content - Titrimetric method

27. ISO 2272:1989 Surface active agents - Soaps - Determination of low contents of free glycerol by

molecular absorption spectrometry

28. ISO 4325:1990 Soaps and detergents - Determination of chelating agent content - Titrimetric

method

29. ISO 8212:1986 Soaps and detergents - Techniques of sampling during manufacture

30. ISO 4198:1984 Surface active agents- Detergents for hand dishwashing- Guide for comparative

testing of performance

Technical Committee No. 50 “Lighting columns and spigots, and their joints”, 5 standards


1. EN 13201-2:2015 Road lighting - Part 2: Performance requirements

2. EN 13201-3:2015 Road lighting - Part 3: Calculation of performance

3. EN 13201-4:2015 Road lighting - Part 4: Methods of measuring lighting performance

4. EN 13201-5:2015 Road lighting - Part 5: Energy performance indicators

5. ISO 23603:2005 Standard method of assessing the spectral quality of daylight simulators for

visual appraisal and measurement of color

49

Technical Committee No. 51 “Cement and building limes. Gypsum and gypsum based”, 3 standards


1. EN 1628:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar

resistance - Test method for the determination of resistance under static loading


resistance - Test method for the determination of resistance under dynamic

loading


resistance - Test method for the determination of resistance to manual burglary

attempts


“Safety of toys”, 3 standards


1. EN 13209-2:2015 Child use and care articles - Baby carriers - Safety requirements and test

methods - Part 2: Soft carrier

2. EN 1466:2014/AC:2015 Child use and care articles - Carry cots and stands - Safety requirements and

test methods

3. CEN/TR 16918:2015 Safety of toys - Children´s mouthing behaviour in contact with toys

Technical Committee No. 55 “Dentistry”, 14 standards


1. EN ISO 4823:2015 Dentistry - Elastomeric impression materials (ISO 4823:2015)

2. EN ISO 16954:2015 Dentistry - Test methods for dental unit waterline biofilm treatment (ISO

16954:2015)

3. EN ISO 18397:2016 Dentistry - Powered scaler (ISO 18397:2016)

4. EN ISO 16408:2015 Dentistry - Oral care products - Oral rinses (ISO 16408:2015)

5. EN ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental

restorations - Test methods for assessing accuracy (ISO 12836:2015)

6. EN ISO 3630-3:2015 Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and

spreaders (ISO 3630-3:2015)

7. EN ISO 22674:2016 Dentistry - Metallic materials for fixed and removable restorations and

appliances (ISO 22674:2016)

50

8. EN ISO 17937:2015 Dentistry - Osteotome (ISO 17937:2015)

9. EN ISO 13397-5:2015 Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette

scalers (ISO 13397-5:2015)

10. EN ISO 10650:2015 Dentistry - Powered polymerization activators (ISO 10650:2015)

11. EN ISO 13356:2015 Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal

zirconia (Y-TZP) (ISO 13356:2015)

12. EN ISO 15912:2016 Dentistry - Refractory investment and die material (ISO 15912:2016)

13. EN ISO 13017:2012/A1:2015 Dentistry - Magnetic attachments - Amendment 1 (ISO 13017:2012/Amd 1:2015)

14. EN ISO 6874:2015 Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015)

Technical Committee No. 67 “Ceramic in building. Thermal insulating materials and products.

Refractory products and materials”, 37 standards


1. EN ISO 10545-14:2015 Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:2015)

2. EN ISO 6781-3:2015 Performance of buildings - Detection of heat, air and moisture irregularities in

buildings by infrared methods - Part 3: Qualifications of equipment operators,

data analysts and report writers (ISO 6781-3:2015)

3. EN ISO 15148:2002/A1:2016 Hygrothermal performance of building materials and products - Determination

of water absorption coefficient by partial immersion - Amendment 1 (ISO

15148:2002/Amd 1:2016)

4. EN 1873:2014+A1:2016 Prefabricated accessories for roofing - Individual rooflights of plastics - Product

specification and test methods

5. EN 15991:2015 Testing of ceramic and basic materials - Direct determination of mass fractions

of impurities in powders and granules of silicon carbide by inductively coupled

plasma optical emission spectrometry (ICP OES) with electrothermal

vaporisation (ETV)

6. ISO 15733:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical

properties of ceramic composites at ambient temperature in air atmospheric

pressure - Determination of tensile properties

7. ISO 17092:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) -

Determination of corrosion resistance of monolithic ceramics in acid and

alkaline solutions

8. ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method

for antibacterial activity of semiconducting photocatalytic materials under

indoor lighting environment

9. ISO 17095:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method

for interfacial bond strength of ceramic materials at elevated temperatures

10. ISO 13765-1:2004 Refractory mortars - Part 1: Determination of consistency using the penetrating

cone method

11. ISO 13765-2:2004 Refractory mortars - Part 2: Determination of consistency using the

reciprocating flow table method

51

12. ISO 13765-3:2004 Refractory mortars - Part 3: Determination of joint stability

13. ISO 13765-4:2004 Refractory mortars - Part 4: Determination of flexural bonding strength

14. ISO 13765-5:2004 Refractory mortars - Part 5: Determination of grain size distribution (sieve

analysis)

15. ISO 13765-6:2004 Refractory mortars - Part 6: Determination of moisture content of ready-mixed

mortars

16. ISO 3187:1989 Refractory products - Determination of creep in compression

17. ISO 5013:1985 Refractory products - Determination of modulus of rupture at elevated

temperatures

18. ISO 5014:1997 Dense and insulating shaped refractory products - Determination of modulus

of rupture at ambient temperature

19. ISO 5016:1997 Shaped insulating refractory products - Determination of bulk density and true

porosity

20. ISO 5017:2013 Dense shaped refractory products - Determination of bulk density, apparent

porosity and true porosity

21. ISO 5018:1983 Refractory materials - Determination of true density

22. ISO 5019-1:1984 Refractory bricks - Dimensions - Part 1: Rectangular bricks

23. ISO 5019-2:1984 Refractory bricks - Dimensions - Part 2: Arch bricks

24. ISO 5019-3:1984 Refractory bricks - Dimensions - Part 3: Rectangular checker bricks for

regenerative furnaces

25. ISO 5019-4:1988 Refractory bricks - Dimensions - Part 4: Dome bricks for electric arc furnace

roofs

26. ISO 5019-5:1984 Refractory bricks - Dimensions - Part 5: Skewbacks

27. ISO 5019-6:2005 Refractory bricks - Dimensions - Part 6: Basic bricks for oxygen steel-making

converters

28. ISO 5022:1979 Shaped refractory products - Sampling and acceptance testing

29. ISO 528:1983 Refractory products - Determination of pyrometric cone equivalent

(refractoriness)

30. ISO 5417:1986 Refractory bricks for use in rotary kilns - Dimensions

31. ISO 836:2001 Terminology for refractories

32. ISO 8656-1:1988 Refractory products - Sampling of raw materials and unshaped products - Part

1: Sampling scheme

33. ISO 8840:1987 Refractory materials - Determination of bulk density of granular materials

(grain density)

34. ISO 8841:1991 Dense, shaped refractory products - Determination of permeability to gases

35. ISO 8890:1988 Dense shaped refractory products - Determination of resistance to sulfuric acid

36. ISO 8894-2:2007 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire

method (parallel)

37. ISO 9205:1988 Refractory bricks for use in rotary kilns - Hot-face identification marking

52

Technical Committee No. 74 “Flanges and their joints”, 1 standard


1. EN 13480-4:2012/A2:2015 Metallic industrial piping - Part 4: Fabrication and installation


“Concrete and related products. Automation and management in

construction”, 21 standards


1. EN 16622:2015 Silica-calcium fume for concrete - Definitions, requirements and conformity

criteria

2. CEN/TR 15728:2016 Design and use of inserts for lifting and handling of precast concrete elements

3. ISO 10406-1:2015 Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part

1: FRP bars and grids

4. ISO 10406-2:2015 Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part

2: FRP sheets

5. ISO 12439:2010 Mixing water for concrete

6. ISO 13315-1:2012 Environmental management for concrete and concrete structures - Part 1:

General principles

7. ISO 13315-2:2014 Environmental management for concrete and concrete structures - Part 2:

System boundary and inventory data

8. ISO 14484:2013 Performance guidelines for design of concrete structures using fibre-reinforced

polymer (FRP) materials

9. ISO 14824-1:2012 Grout for prestressing tendons - Part 1: Basic requirements

10. ISO 14824-2:2012 Grout for prestressing tendons - Part 2: Grouting procedures

11. ISO 14824-3:2012 Grout for prestressing tendons - Part 3: Test methods

12. ISO 15673:2005 Guidelines for the simplified design of structural reinforced concrete for

buildings

13. ISO 16204:2012 Durability - Service life design of concrete structures

14. ISO 16311-1:2014 Maintenance and repair of concrete structures - Part 1: General principles

15. ISO 16311-2:2014 Maintenance and repair of concrete structures - Part 2: Assessment of existing

concrete structures

16. ISO 16311-3:2014 Maintenance and repair of concrete structures - Part 3: Design of repairs and

prevention

17. ISO 16311-4:2014 Maintenance and repair of concrete structures - Part 4: Execution of repairs and

prevention

18. ISO 16711:2015 Seismic assessment and retrofit of concrete structures

19. ISO 17785-1:2016 Testing methods for pervious concrete - Part 1: Infiltration rate

53

20. ISO 18319:2015 Fibre-reinforced polymer (FRP) reinforcement for concrete structures -

Specifications of FRP sheets

21. ISO 1920-12:2015 Testing of concrete - Part 12: Determination of the carbonation resistance of

concrete - Accelerated carbonation method

Technical Committee No. 114 “Safety of machinery and fire safety”, 28 standards


1. EN 81-73:2016 Safety rules for the construction and installation of lifts - Particular applications

for passenger and goods passenger lifts - Part 73: Behavior of lifts in the event

of fire

2. EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat

detectors

3. EN ISO 19353:2016 Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)

4. EN ISO 9241-391:2016 Ergonomics of human-system interaction - Part 391: Requirements, analysis and

compliance test methods for the reduction of photosensitive seizures

5. CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how

end users perform their work with machines

6. CEN ISO/TR 9241-308:2015 Ergonomics of human-system interaction - Part 308: Surface-conduction

electron-emitter displays (SED) (ISO/TR 9241-308:2008)

7. CEN ISO/TR 9241-309:2015 Ergonomics of human-system interaction - Part 309: Organic light-emitting

diode (OLED) displays (ISO/TR 9241-309:2008)

8. CEN ISO/TR 9241-310:2015 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and

ergonomics of pixel defects (ISO/TR 9241-310:2010)

9. EN 13236:2010+A1:2015 Safety requirements for super abrasive products

10. EN 12895:2015 Industrial trucks - Electromagnetic compatibility

11. EN ISO 3691-2:2016 Industrial trucks - Safety requirements and verification - Part 2: Self-propelled

variable-reach trucks (ISO 3691-2:2016)

12. EN ISO 3691-5:2015 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-

propelled trucks (ISO 3691-5:2014)

13. EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety

and hygiene requirements

14. ISO 1204:1990 Reciprocating internal combustion engines - Designation of the direction of

rotation and of cylinders and valves in cylinder heads, and definition of right-

hand and left-hand in-line engines and locations on an engine

15. ISO 7919-2:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating

shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with

normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

16. ISO 7919-5:2005 Mechanical vibration - Evaluation of machine vibration by measurements on

rotating shafts - Part 5: Machine sets in hydraulic power generating and

pumping plants

17. ISO 4548-1:1997 Methods of test for full-flow lubricating oil filters for internal combustion

engines - Part 1: Differential pressure/flow characteristics

54


engines - Part 15: Vibration fatigue test for composite filter housings


engines - Part 14: Cold start simulation and hydraulic pulse durability for

composite filter housings


engines - Part 2: Element by-pass valve characteristics


engines - Part 3: Resistance to high differential pressure and to elevated

temperature


engines - Part 4: Initial particle retention efficiency, life and cumulative

efficiency (gravimetric method)


engines - Part 5: Test for cold start simulation and hydraulic pulse durability


engines - Part 6: Static burst pressure test


engines - Part 7: Vibration fatigue test


engines - Part 9: Inlet and outlet anti-drain valve tests


engines - Part 13: Static burst pressure test for composite filter housings


engines - Part 12: Filtration efficiency using particle counting, and contaminant

retention capacity

Technical Committee No. 129 “Glass”, 15 standards


1. EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1:

Definition and description

2. EN 1096-5:2016 Glass in building - Coated glass - Part 5 - Test method and classification for the

self-cleaning performances of coated glass surfaces

3. EN 15681-1:2016 Glass in building - Basic alumino silicate glass products - Part 1: Definitions and

general physical and mechanical properties

4. EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions

and general physical and mechanical properties

5. EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and

final cut sizes

6. ISO 9100-2:2005/Cor 1:2009 Glass containers - Vacuum lug finishes - Part 2: 33 medium

7. ISO 9100-3:2005 Glass containers - Vacuum lug finishes - Part 3: 38 regular

8. ISO 9100-3:2005/Cor 1:2009 Glass containers - Vacuum lug finishes - Part 3: 38 regular

55

9. ISO 9100-4:2005 Glass containers - Vacuum lug finishes - Part 4: 38 medium

10. ISO 9100-4:2005/Cor 1:2009 Glass containers - Vacuum lug finishes - Part 4: 38 medium

11. ISO 9100-5:2005 Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular

12. ISO 9100-6:2005 Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular

13. ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep

14. ISO 9100-8:2005 Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular

15. ISO 9100-9:2005 Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep


“Metals and their alloys”, 33 standards


1. EN ISO 18278-2:2016 Resistance welding - Weldability - Part 2: Evaluation procedures for weldability

in spot welding (ISO 18278-2:2016)

2. EN ISO 9454-1:2016 Soft soldering fluxes - Classification and requirements - Part 1: Classification,

labelling and packaging (ISO 9454-1:2016)

3. EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by

complex plane analysis (ISO 17643:2015)

4. EN ISO 636:2015 Welding consumables - Rods, wires and deposits for tungsten inert gas welding

of non-alloy and fine-grain steels - Classification (ISO 636:2015)

5. EN ISO 1071:2015 Welding consumables - Covered electrodes, wires, rods and tubular cored

electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)

6. EN ISO 14172:2015 Welding consumables - Covered electrodes for manual metal arc welding of

nickel and nickel alloys - Classification (ISO 14172:2015)

7. EN ISO 18273:2015 Welding consumables - Wire electrodes, wires and rods for welding of

aluminium and aluminium alloys - Classification (ISO 18273:2015)

8. EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas

shielded metal arc welding of non-alloy and fine grain steels - Classification

(ISO 17632:2015)

9. EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2:

Microhardness testing of welded joints (ISO 9015-2:2016)

10. EN ISO 9018:2015 Destructive tests on welds in metallic materials - Tensile test on cruciform and

lapped joints (ISO 9018:2015)

11. EN ISO 17641-2:2015 Destructive tests on welds in metallic materials - Hot cracking tests for

weldments - Arc welding processes - Part 2: Self-restraint tests

12. EN ISO 17683:2015 Ships and marine technology - Ceramic weld backing for marine use (ISO

17683:2014)

13. EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO

8430-1:2016)

14. EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO

8430-2:2016)

15. EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for

end thrust (ISO 8430-3:2016)

56

16. EN 16773:2016 Aluminium and aluminium alloys - Guideline for the production of foil-stock

in the field of semi rigid foodstuff containers

17. EN ISO 2746:2015 Vitreous and porcelain enamels - High voltage test (ISO 2746:2015)

18. EN ISO 28721-4:2015 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part

4: Quality requirements for glass-lined flanged steel pipes and flanged steel

fittings (ISO 28721-4:2015)

19. EN ISO 8044:2015 Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)

20. EN ISO 28706-4:2016 Vitreous and porcelain enamels - Determination of resistance to chemical

corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline

liquids using a cylindrical vessel (ISO 28706-4:2016)

21. EN ISO 28721-2:2015 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part

2: Designation and specification of resistance to chemical attack and thermal

shock (ISO 28721-2:2015)

22. EN ISO 28764:2015 Vitreous and porcelain enamels - Production of specimens for testing enamels

on sheet steel, sheet aluminium and cast iron (ISO 28764:2015)

23. EN ISO 28765:2016 Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or

treatment of water or municipal or industrial effluents and sludges (ISO

28765:2016)

24. EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials

parameters - Part 2: Verification and calibration of testing machines (ISO 14577-

2:2015)

25. EN ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing

machines - Part 1: Tension/compression testing machines - Calibration and

verification of the force-measuring system (ISO 7500-1:2015)

26. EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test

blocks (ISO 16859-3:2015)

27. EN ISO 16859-1:2015 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)

28. EN ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of

the testing devices (ISO 16859-2:2015)

29. EN ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test

method (ISO 14556:2015)

30. EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016)

31. EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies

32. EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully

processed state

33. EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical

delivery conditions

Technical Committee No. 136 “Sports, playground and other recreational equipment”, 16 standards


1. EN 15567-1:2015 Sports and recreational facilities - Ropes courses - Part 1: Construction and

safety requirements

57

2. EN 15567-2:2015 Sports- and recreational facilities - Ropes courses - Part 2: Operation

requirements

3. EN 16664:2015 Playing field equipment - Lightweight goals - Functional, safety requirements

and test methods

4. EN 13451-2:2015 Swimming pool equipment - Part 2: Additional specific safety requirements

and test methods for ladders, stepladders and handle bends

5. EN 926-1:2015 Paragliding equipment - Paragliders - Part 1: Requirements and test methods

for structural strength

6. EN 12491:2015 Paragliding equipment - Emergency parachutes - Safety requirements and test

methods

7. EN 16664:2015 Playing field equipment - Lightweight goals - Functional, safety requirements

and test methods

8. EN 1972:2015 Diving equipment - Snorkels - Requirements and test methods

9. EN 16804:2015 Diving equipment - Diving open heel fins - Requirements and test methods

10. EN 16805:2015 Diving equipment - Diving mask - Requirements and test methods

11. EN 568:2015 Mountaineering equipment - Ice anchors - Safety requirements and test

methods

12. EN 12277:2015 Mountaineering equipment - Harnesses - Safety requirements and test methods

13. EN ISO 4210-6:2015 Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods

(ISO 4210-6:2015)

14. EN ISO 42102:2015 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and

trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)

15. EN 16648:2015 Conservation of cultural heritage - Transport methods

16. EN 16572:2015 Conservation of cultural heritage - Glossary of technical terms concerning

mortars for masonry, renders and plasters used in cultural heritage

Technical Committee No. 138 “Non destructive testing”, 5 standards


1. EN ISO 9934-1:2015 Non-destructive testing - Magnetic particle testing - Part 1: General principles

(ISO 9934-1:2015)

2. EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media

(ISO 9934-2:2015)

3. EN ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO

9934-3:2015)

4. EN ISO 18563-3:2015 Non-destructive testing - Characterization and verification of ultrasonic phased

array equipment - Part 3: Combined systems (ISO 18563-3:2015)

5. EN 13018:2016 Non-destructive testing - Visual testing - General principles

58

Technical Committee No. 144 “Tractors and machinery for agriculture and forestry”, 5 standards


1. EN ISO 16230-1:2015 Agricultural machinery and tractors - Safety of higher voltage electrical and

electronic components and systems - Part 1: General requirements

2. EN ISO 17989-1:2015 Tractors and machinery for agriculture and forestry - Sustainability - Part 1:

Principles (ISO 17989-1:2015)

3. EN ISO 16231-2:2015 Self-propelled agricultural machinery - Assessment of stability - Part 2:

Determination of static stability and test procedures (ISO 16231-2:2015)

4. EN ISO 11850:2011/A1:2016 Machinery for forestry - General safety requirements (ISO 11850:2011/Amd

1:2016)

5. EN 15694:2009+A1:2015 Agricultural and forestry tractors - Passenger seat - Requirements and test

procedures

Technical Committee No. 154 “Aggregates and masonry”, 2 standards


1. EN 16475-7:2016 Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods

2. EN 13084-6:2015 Free-standing chimneys - Part 6: Steel liners - Design and execution

Technical Committee No. 172 “Pulp, paper and board”, 15 standards


1. ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by

transmitted light

2. ISO 5350-2:2006 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp

by transmitted light

3. ISO 638:2008 Paper, board and pulps - Determination of dry matter content - Oven-drying

method

4. ISO 7213:1981 Pulps - Sampling for testing

5. ISO 801-1:1994 Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form

6. ISO 801-3:1994 Pulps - Determination of saleable mass in lots - Part 3: Unitized bales

7. ISO 9184-5:1990 Paper, board and pulps - Fibre furnish analysis - Part 5: Lofton-Merritt staining

test (modification of Wisbar)

8. ISO/TR 24498:2006 Paper, board and pulps - Estimation of uncertainty for test methods

9. ISO/TR 25477:2008 Paper, board and pulps - Basic guidelines for image analysis measurements

10. ISO 18613:2014 Pallets for materials handling - Repair of flat wooden pallets

59

11. ISO 445:2013 Pallets for materials handling - Vocabulary

12. ISO 8611-2:2011 Pallets for materials handling - Flat pallets - Part 2: Performance requirements

and selection of tests

13. ISO 8611-3:2011 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

14. ISO/TS 8611-4:2013 Pallets for materials handling - Flat pallets - Part 4: Procedure for predicting

creep responses in stiffness tests for plastic pallets using regression analyses

15. ISO 3340:1976 Fibre building boards - Determination of sand content

Technical Committee No. 175 “Round and sawn timber”, 8 standards


1. EN 16718:2015 Wood and wood based products - Dosage of the total organic carbon (TOC) in

wood and wood based products

2. EN 16351:2015 Timber structures - Cross laminated timber - Requirements

3. EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners

4. EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners

5. EN 1381:2016 Timber structures - Test methods - Load bearing stapled joints

6. EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross

section - Part 1: General requirements

7. EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems - Specifications

8. EN 923:2015 Adhesives - Terms and definitions

Technical Committee No. 185 “Fasteners, screws and auxiliary elements”, 1 standard


1. EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)

Technical Committee No. 205 “Non-active medical devices”, 12 standards


1. EN 16578:2016 Ceramics sanitary appliances - Sustainability assessment

2. EN ISO 8536-8:2015 Infusion equipment for medical use - Part 8: Infusion sets for single use with

pressure infusion apparatus (ISO 8536-8:2015)

3. EN ISO 8536-10:2015 Infusion equipment for medical use - Part 10: Accessories for fluid lines for

single use with pressure infusion equipment (ISO 8536-10:2015)

4. EN ISO 1135-5:2015 Transfusion equipment for medical use - Part 5: Transfusion sets for single use

60

with pressure infusion apparatus (ISO 1135-5:2015)

5. EN ISO 26722:2015 Water treatment equipment for haemodialysis applications and related

therapies (ISO 26722:2014)

6. EN ISO 13958:2015 Concentrates for haemodialysis and related therapies (ISO 13958:2014)

7. EN ISO 23500:2015 Guidance for the preparation and quality management of fluids for

haemodialysis and related therapies (ISO 23500:2014)

8. EN ISO 13959:2015 Water for haemodialysis and related therapies (ISO 13959:2014)

9. EN ISO 11663:2015 Quality of dialysis fluid for haemodialysis and related therapies

10. EN ISO 5840-1:2015 Cardiovascular implants - Cardiac valve prostheses - Part 1: General

requirements (ISO 5840-1:2015)

11. EN ISO 5840-2:2015 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically

implanted heart valve substitutes (ISO 5840-2:2015)

12. EN ISO 12417-1:2015 Cardiovascular implants and extracorporeal systems - Vascular device-drug

combination products - Part 1: General requirements (ISO 12417-1:2015)

Technical Committee No. 206 “Biocompatibility of medical and dental materials and devices”,

4 standards


1. EN ISO 15883-6:2015 Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors

employing thermal disinfection for non-invasive, non-critical medical devices

and healthcare equipment (ISO 15883-6:2011)

2. EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers


employing chemical disinfection for non-invasive, non-critical thermolabile

medical devices and healthcare equipment (ISO 15883-7:2016)


employing thermal disinfection for non-invasive, non-critical medical devices

and healthcare equipment (ISO 15883-6:2011)

Technical Committee No. 211 “Acoustics”, 5 standards


1. EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference

sound sources used for the determination of sound power levels (ISO

6926:2016)

2. EN ISO 389-3:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 3:

Reference equivalent threshold vibratory force levels for pure tones and bone

vibrators (ISO 389-3:2016)

61

3. EN ISO 16283-2:2015 Acoustics - Field measurement of sound insulation in buildings and of building

elements - Part 2: Impact sound insulation (ISO 16283-2:2015)

4. EN ISO 16283-3:2016 Acoustics - Field measurement of sound insulation in buildings and of building

elements - Part 3: Façade sound insulation (ISO 16283-3:2016)

5. EN 16703:2015 Acoustics - Test code for drywall systems of plasterboard with steel studs -

Airborne sound insulation


“Respiratory and anaesthetic equipment”, 8 standards


1. EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1:

Components for the UV, visible and near-infrared spectral ranges (ISO 11151-

1:2015)

2. EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2:

Components for the infrared spectral range (ISO 11151-2:2015)

3. EN ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the

assessment of pulmonary function in spontaneously breathing humans (ISO

23747:2015)

4. EN ISO 11810:2015 Lasers and laser-related equipment - Test method and classification for the laser

resistance of surgical drapes and/or patient protective covers - Primary ignition,

penetration, flame spread and secondary ignition (ISO 11810:2015)

5. EN ISO 11197:2016 Medical supply units (ISO 11197:2016)

6. EN ISO 10079-1:2015 Medical suction equipment - Part 1: Electrically powered suction equipment

(ISO 10079-1:2015)

7. EN ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic

safety and essential performance of home healthcare environment ventilators

for ventilator-dependent patients (ISO 80601-2-72:2015)

8. EN 16372:2014 Aesthetic surgery services

Technical Committee No. 218 “Rubber and plastics hoses and piping”, 7standards


1. EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications -

Specification (ISO 5774:2016)

2. EN ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids

through hose and tubing walls (ISO 8308:2015)

3. EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin ...

4. ISO 247:2006 Rubber - Determination of ash

5. ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-

type durometer method

62

6. ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1:

Trouser, angle and crescent test pieces


Small (Delft) test pieces

Technical Committee No. 218 “Rubber and plastics hoses and piping”, 7standards


1. EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications -

Specification (ISO 5774:2016)

2. EN ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids

through hose and tubing walls (ISO 8308:2015)

3. EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin

system)

4. ISO 247:2006 Rubber - Determination of ash

5. ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-

type durometer method


Trouser, angle and crescent test pieces


Small (Delft) test pieces

Technical Committee No. 224 “Information processing systems”, 118 standards


1. EN 1573:2015 Bar code - Multi industry transport label

2. EN ISO 13940:2016 Health informatics - System of concepts to support continuity of care (ISO

13940:2015)

3. CEN ISO/TS 13972:2015 Health informatics - Detailed clinical models, characteristics and processes

(ISO/TS 13972:2015)

4. EN ISO 11073-

30200:2005/A1:2015

Health informatics - Point-of-care medical device communication - Part 30200:

Transport profile - Cable connected - Amendment 1 (ISO/IEEE 11073-

30200:2004/Amd 1:2015)

5. CEN ISO/TS 19844:2015 Health informatics - Identification of medicinal products - Implementation

guidelines for data elements and structures for the unique identification and

exchange of regulated information on substances (ISO/TS 19844:2015)

6. CEN ISO/TS 18530:2015 Health Informatics - Automatic identification and data capture marking and

labelling - Subject of care and individual provider identification (ISO/TS

18530:2014)

7. EN ISO 24014-1:2015 Public transport - Interoperable fare management system - Part 1: Architecture

63

8. CEN/TS 16157-6:2015 Intelligent transport systems - DATEX II data exchange specifications for traffic

management and information - Part 6: Parking Publications

9. EN ISO 12855:2015 Electronic fee collection - Information exchange between service provision and

toll charging (ISO 12855:2015)

10. EN ISO 17575-1:2016 Electronic fee collection - Application interface definition for autonomous

systems - Part 1: Charging (ISO 17575-1:2016)

11. CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015)

12. EN ISO 12813:2015 Electronic fee collection - Compliance check communication for autonomous

systems (ISO 12813:2015)

13. EN ISO 13141:2015 Electronic fee collection - Localisation augmentation communication for

autonomous systems (ISO 13141:2015)


systems - Part 2: Communication and connection to the lower layers


systems - Part 3: Context data (ISO 17575-3:2016)

16. CEN/TS 13149-7:2015 Public transport - Road vehicle scheduling and control systems - Part 7: System

and Network Architecture

17. CEN ISO/TS 14907-1:2015 Electronic fee collection - Test procedures for user and fixed equipment - Part 1:

Description of test procedures (ISO/TS 14907-1:2015)

18. EN 14508:2016 Postal services - Quality of service - Measurement of the transit time of end-to-

end services for single piece non-priority mail and second class mail

19. CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features

20. CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items

21. EN 13724:2013/AC:2016 Postal services - Apertures of private letter boxes and letter plates -

Requirements and test methods

22. CWA 15748-38:2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 -

Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 3.10


Part 39: XFS MIB Device Specific Definitions - Alarm Device Class MIB 3.10

24. CWA 15748-40:2011 Extensions for Financial Services (XFS) interface specification Release 3.10 - Part

40: XFS MIB Device Specific Definitions - Card Embossing Unit Device Class

MIB 3.10


Part 41: XFS MIB Device Specific Definitions - Cash In Module Device Class

MIB 3.10


Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Class

MIB 3.10


Part 44: XFS MIB Application Management MIB 3.10


Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB

3.10


Part 46: XFS MIB Device Specific Definitions - Barcode Reader Device Class

MIB 3.10

64


Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device

Class MIB Version 3.10


1: Application Programming Interface (API) Service Provider Interface (SPI)

Programmer's Reference


2: Service Class Definition Programmer's Reference


3: Printer and Scanning Device Class Interface Programmer's Reference


4: Identification Card Device Class Interface Programmer's Reference


5: Cash Dispenser Device Class Interface Programmer's Reference


6: PIN Keypad Device Class Interface Programmer's Reference


7: Check Reader/Scanner Device Class Interface Programmer's Reference


8: Depository Device Class Interface Programmer's Reference


9: Text Terminal Unit Device Class Interface Programmer's Reference


10: Sensors and Indicators Unit Device Class Interface Programmer's Reference


11: Vendor Dependent Mode Device Class Interface Programmer's Reference


12: Camera Device Class Interface Programmer's Reference


13: Alarm Device Class Interface Programmer's Reference


14: Card Embossing Unit Device Class Interface Programmer's Reference


15: Cash-In Module Device Class Interface Programmer's Reference


16: Card Dispenser Device Class Interface Programmer's Reference


17: Barcode Reader Device Class Interface Programmer's Reference


18: Item Processing Module Device Class Interface Programmer's Reference

49. CWA 16374-61:2011 Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 61:

Application Programming Interface (API) Service Provider Interface (SPI) Migration

from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference


62: Printer and Scanning Device Class Interface Migration from Version 3.10

(CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

65


63: Identification Card Device Class Interface Migration from Version 3.10



64: Cash Dispenser Device Class Interface Migration from Version 3.10 (CWA

15748) to Version 3.20 (this CWA) Programmer's Reference


65: PIN Keypad Device Class Interface Migration from Version 3.10 (CWA



66: Check Reader/Scanner Device Class Interface Migration from Version 3.10



67: Depository Device Class Interface Migration from Version 3.10 (CWA



68: Text Terminal Unit Device Class Interface Migration from Version 3.10



69: Sensors and Indicators Unit Device Class Interface Migration from Version

3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference


70: Vendor Dependent Mode Device Class Interface Migration from Version

3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference


71: Camera Device Class Interface Migration from Version 3.10 (CWA 15748) to

Version 3.20 (this CWA) Programmer's Reference


72: Alarm Device Class Interface Migration from Version 3.10 (CWA 15748) to



73: Card Embossing Unit Device Class Interface Migration from Version 3.10



74: Cash-In Module Device Class Interface Migration from Version 3.10 (CWA



75: Card Dispenser Device Class Interface Migration from Version 3.10 (CWA



76: Barcode Reader Device Class Interface Migration from Version 3.10 (CWA


65. CWA 16374-77:2011 Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 77: Item

Processing Module Device Class Interface Migration from Version 3.10 (CWA 15748) to



Part 29: XFS MIB Architecture and SNMP Extensions MIB 3.20

66


Part 30: XFS MIB Device Specific Definitions - Printer Device Class MIB 3.20


Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class

MIB 3.20


Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class MIB

3.20


Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class MIB

3.20


Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device

Class MIB 3.20


Part 35: XFS MIB Device Specific Definitions - Depository Device Class MIB

3.20


Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class

MIB 3.20


Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit

Device Class MIB 3.20


Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 3.20


Part 39: XFS MIB Device Specific Definitions - Alarm Device Class MIB 3.20


Part 40: XFS MIB Device Specific Definitions - Card Embossing Unit Device

Class MIB 3.20


Part 41: XFS MIB Device Specific Definitions - Cash-In Module Device Class

MIB 3.20

79. CWA 16374-43:2014 Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 43:

XFS MIB Device Specific Definitions - Vendor Dependent Mode Class MIB 3.20


Part 44: XFS MIB Application Management MIB 3.20


XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB 3.20


XFS MIB Device Specific Definitions - Barcode Reader Device Class MIB 3.20


Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device

Class MIB Version 3.20


1: Application Programming Interface (API) - Service Provider Interface (SPI) -

Programmer's Reference

67


2: Service Class Definition - Programmer's Reference


3: Printer and Scanning Device Class Interface - Programmer's Reference


4: Identification Card Device Class Interface - Programmer's Reference


5: Cash Dispenser Device Class Interface - Programmer's Reference

89. CWA 16926-6:2015 Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 6: PIN

Keypad Device Class Interface - Programmer's Reference

90. CWA 16926-7:2015 Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 7: Check

Reader/Scanner Device Class Interface - Programmer's Reference


8: Depository Device Class Interface - Programmer's Reference


9: Text Terminal Unit Device Class Interface - Programmer's Reference


Sensors and Indicators Unit Device Class Interface - Programmer's Reference


11: Vendor Dependent Mode Device Class Interface - Programmer's Reference


12: Camera Device Class Interface - Programmer's Reference


13: Alarm Device Class Interface - Programmer's Reference

97. CWA 16926-14:2015 Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 14: Card

Embossing Unit Device Class Interface - Programmer's Reference


Cash-In Module Device Class Interface - Programmer's Reference

99. CWA 16926-16:2015 Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 16: Card

Dispenser Device Class Interface - Programmer's Reference


Barcode Reader Device Class Interface - Programmer's Reference


18: Item Processing Module Device Class Interface - Programmer's Reference


Application Programming Interface (API) - Migration from Version 3.20 (CWA 16374) to

Version 3.30 (this CWA) - Service Provider Interface (SPI) - Programmer's Reference


Printer and Scanning Device Class Interface - Migration from Version 3.20 (CWA 16374)

to Version 3.30 (this CWA) - Programmer's Reference


Identification Card Device Class Interface - Migration from Version 3.20 (CWA 16374) to

Version 3.30 (this CWA) - Programmer's Reference

105. CWA 16926-64:2015 Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 64: Cash

Dispenser Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version

3.30 (this CWA) - Programmer's Reference


65: PIN Keypad Device Class Interface - Migration from Version 3.20 (CWA

16374) to Version 3.30 (this CWA) - Programmer's Reference

68


66: Check Reader/Scanner Device Class Interface - Migration from Version 3.20

(CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference


67: Depository Device Class Interface - Migration from Version 3.20 (CWA



68: Text Terminal Unit Device Class Interface - Migration from Version 3.20



69: Sensors and Indicators Unit Device Class Interface - Migration from Version

3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference


70: Vendor Dependent Mode Device Class Interface - Migration from Version



71: Camera Device Class Interface - Migration from Version 3.20 (CWA 16374)

to Version 3.30 (this CWA) - Programmer's Reference


72: Alarm Device Class Interface - Migration from Version 3.20 (CWA 16374) to

Version 3.30 (this CWA) - Programmer's Reference


73: Card Embossing Unit Device Class Interface - Migration from Version 3.20



74: Cash-In Module Device Class Interface - Migration from Version 3.20 (CWA



75: Card Dispenser Device Class Interface - Migration from Version 3.20 (CWA



76: Barcode Reader Device Class Interface - Migration from Version 3.20 (CWA



77: Item Processing Module Device Class Interface - Migration from Version


Technical Committee No. 230 “Water, air and soil quality”, 54 standards


1. EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1:

Definitions, classification, general principles of design, performance

requirements and test methods

69

2. EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully

tops and manhole tops made of steel or aluminium alloys


tops and manhole tops made of steel reinforced concrete


tops and manhole tops made of composite materials


tops and manhole tops made of polypropylene (PP), polyethylene (PE) or

unplasticized poly(vinyl chloride) (PVC-U)


tops and manhole tops made of cast iron

7. CEN/TR 16596:2013 Electric-electronic interface between chassis-cab and bodywork of refuse

collection vehicles (RCVs)

8. EN ISO 14238:2013 Soil quality - Biological methods - Determination of nitrogen mineralization

and nitrification in soils and the influence of chemicals on these processes (ISO

14238:2012)

9. CEN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of

aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using

gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-

2:2015)

10. EN ISO 28258:2013 Soil quality - Digital exchange of soil-related data (ISO 28258:2013)

11. EN ISO 11274:2014 Soil quality - Determination of the water-retention characteristic - Laboratory

methods (ISO 11274:1998 + Cor 1:2009)

12. EN ISO 11272:2014 Soil quality - Determination of dry bulk density (ISO 11272:1998)

13. EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method (ISO

11276:1995)

14. EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998)

15. EN ISO 11275:2014 Soil quality - Determination of unsaturated hydraulic conductivity and water-

retention characteristic - Wind's evaporation method (ISO 11275:2004)

16. EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using

coring sleeves - Gravimetric method (ISO 11461:2001)

17. EN ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared

spectrometry (NIRS) (ISO 17184:2014)

18. EN ISO 16198:2015 Soil quality - Plant-based test to assess the environmental bioavailability of

trace elements to plants (ISO 16198:2015)

19. EN ISO 10693:2014 Soil quality - Determination of carbonate content - Volumetric method (ISO

10693:1995)

20. EN ISO 18772:2014 Soil quality - Guidance on leaching procedures for subsequent chemical and

ecotoxicological testing of soils and soil materials (ISO 18772:2008)

21. CEN ISO/TS 29843-1:2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by

phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL)

analysis (ISO/TS 29843-1:2010)

22. CEN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by

phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction

method (ISO/TS 29843-2:2011, Corrected version 2012-02-01)

23. EN ISO 12404:2015 Soil quality - Guidance on the selection and application of screening methods

70

24. EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray

fluorescence spectrometry using a handheld or portable instrument

25. CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and

guidelines for quantification and communication (ISO/TS 14067:2013)

26. CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic

hydrocarbons (PAH) by gas chromatography (GC) and high performance

liquid chromatography (HPLC)

27. CEN/TS 16172:2013 Sludge, treated biowaste and soil - Determination of elements using graphite

furnace atomic absorption spectrometry (GF-AAS)

28. CEN/TS 15937:2013 Sludge, treated biowaste and soil - Determination of specific electrical

conductivity

29. EN ISO 17621:2015 Workplace atmospheres - Short term detector tube measurement systems -

Requirements and test methods (ISO 17621:2015)

30. EN 482:2012+A1:2015 Workplace exposure - General requirements for the performance of procedures

for the measurement of chemical agents

31. EN 1420:2016 Influence of organic materials on water intended for human consumption -

Determination of odour and flavour assessment of water in piping systems

32. CEN/TR 1295-4:2015 Structural design of buried pipelines under various conditions of loading - Part

4: Parameters for reliability of the design

33. CEN/TR 16815:2015 CleANopen - Application profile for municipal vehicles

34. EN ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter

media (ISO 16891:2016)

35. EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole

water samples - Method using solid phase extraction (SPE) with SPE-

36. EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether

(PBDE) in whole water samples - Method using solid phase extraction (SPE)

with SPE-disks combined with gas chromatography - mass spectrometry (GC-

MS)

37. EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons

(PAH) in whole water samples - Method using solid phase extraction (SPE)

with SPE-disks combined with gas chromatography mass spectrometry (GC-

MS)

38. EN 16698:2015 Water quality - Guidance on quantitative and qualitative sampling of

phytoplankton from inland waters

39. CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods

40. EN ISO 13160:2015 Water quality - Strontium 90 and strontium 89 - Test methods using liquid

scintillation counting or proportional counting (ISO 13160:2012)

41. EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water

by alpha spectrometry (ISO 13161:2011)

42. EN ISO 10703:2015 Water quality - Determination of the activity concentration of radionuclides -

Method by high resolution gamma-ray spectrometry (ISO 10703:2007)

43. EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of

air cleanliness by particle concentration (ISO 14644-1:2015)

44. CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) -

Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter

(PMF) and Sigma-2-sampler

71

45. CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) -

Pollen monitoring - Part 2: Biological pollen sampling using bee colonies

46. CEN/TS 16868:2015 Ambient air - Sampling and analysis of airborne pollen grains and fungal

spores for allergy networks - Volumetric Hirst method

47. CEN/TS 15864:2015 Characterization of waste - Leaching behaviour test for basic characterization -

Dynamic monolithic leaching test with continuous leachant renewal under

conditions relevant for specified scenario(s)

48. EN ISO 14046:2016 Environmental management - Water footprint - Principles, requirements and

guidelines (ISO 14046:2014)

49. CEN ISO/TS 14071:2016 Environmental management - Life cycle assessment - Critical review processes

and reviewer competencies: Additional requirements and guidelines to ISO

14044:2006 (ISO/TS 14071:2014)

50. CEN/TS 16201:2013 Sludge, treated biowaste and soil - Determination of viable plant seeds and

propagules

51. CEN/TS 16202:2013 Sludge, treated biowaste and soil - Determination of impurities and stones

52. CEN/TR 16193:2013 Sludge, treated biowaste and soil - Detection and enumeration of Escherichia

coli

53. CEN/TS 16175-1:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-

vapour atomic absorption spectrometry (CV-AAS)

54. CEN/TS 16175-2:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-

vapour atomic fluorescence spectrometry (CV-AFS)

Technical Committee No. 233 “Biotechnology and microbiology”, 11 standards


1. EN ISO 18416:2015 Cosmetics - Microbiology - Detection of Candida albicans (ISO 18416:2015)

2. EN ISO 21150:2015 Cosmetics - Microbiology - Detection of Escherichia coli (ISO 21150:2015)

3. EN ISO 22717:2015 Cosmetics - Microbiology - Detection of Pseudomonas aeruginosa

4. EN ISO 22718:2015 Cosmetics - Microbiology - Detection of Staphylococcus aureus

5. ISO 15932:2013 Microbeam analysis - Analytical electron microscopy - Vocabulary

6. ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for

determining the carbon content of steels using a calibration curve method

7. ISO 16700:2004 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating

image magnification

8. ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative

point analysis by wavelength dispersive X-ray spectrometry

9. ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point

analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy

10. ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary

11. ISO 23833:2013 Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary

72

Technical Committee No. 248 “Textiles and textile products”, 18 standards


1. EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)

2. EN ISO 10318-2:2015 Geosynthetics - Part 2: Symbols and pictograms (ISO 10318-2:2015)

3. EN 14574:2015 Geosynthetics - Determination of the pyramid puncture resistance of supported

geosynthetics

4. EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)

5. EN ISO 25619-2:2015 Geosynthetics - Determination of compression behaviour - Part 2:

Determination of short-term compression behaviour (ISO 25619-2:2015)

6. CEN/TR 16741:2015 Textiles and textile products - Guidance on health and environmental issues

related to chemical content of textile products intended for clothing, interior

textiles and upholstery

7. EN ISO 2061:2015 Textiles - Determination of twist in yarns - Direct counting method

8. EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay

geosynthetic barriers

9. CEN/TS 14237:2015 Textiles for healthcare and social services facilities

10. EN ISO 16373-1:2015 Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for

dyestuff identification (ISO 16373-1:2015)

11. EN 16711-2:2015 Textiles - Determination of metal content - Part 2: Determination of metals

extracted by acidic artificial perspiration solution

12. EN 16711-1:2015 Textiles - Determination of metal content - Part 1: Determination of metals

using microwave digestion

13. CEN/TS 16822:2015 Textiles and textile products - Self-declared environmental claims - Use of the

terms

14. EN 16732:2015 Slide fasteners (zips) - Specification

15. EN ISO 137:2015 Wool - Determination of fibre diameter - Projection microscope method (ISO

137:2015)

16. EN ISO 17881-2:2016 Textiles - Determination of certain flame retardants - Part 2: Phosphorus flame

retardants (ISO 17881-2:2016)

17. EN ISO 17881-1:2016 Textiles - Determination of certain flame retardants - Part 1: Brominated flame

retardants (ISO 17881-1:2016)

18. ISO 17617:2014 Textiles - Determination of moisture drying rate

Technical Committee No. 256 “Railway applications”, 12 standards


1. EN 14535-3:2015 Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs,

performance of the disc and the friction couple, classification

2. CEN/TR 16251:2016 Railway applications - Environmental conditions - Design guidance for rolling

stock

73

3. EN 14531-2:2015 Railway applications - Methods for calculation of stopping and slowing

distances and immobilization braking - Part 2: Step by step calculations for

train sets or single vehicles

4. EN 16683:2015 Railway applications - Call for aid and communication device - Requirements

5. EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running

characteristics of railway vehicles - Running Behaviour and stationary tests

6. EN 14531-1:2015 Railway applications - Methods for calculation of stopping and slowing

distances and immobilization braking - Part 1: General algorithms utilizing

mean value calculation for train sets or single vehicles

7. EN 15528:2015 Railway applications - Line categories for managing the interface between load

limits of vehicles and infrastructure

8. CEN/TR 16823:2015 Railway applications - Driver's cab - Background information on

anthropometric data

9. CEN/TS 16272-7:2015 Railway applications - Track - Noise barriers and related devices acting on

airborne sound propagation - Test method for determining the acoustic

performance - Part 7: Extrinsic characteristics - In situ values of insertion loss

10. EN 16404:2016 Railway applications - Re-railing and recovery requirements for railway

vehicles

11. EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2:

Requirements for fire behaviour of materials and components

12. EN 45545-5:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 5: Fire safety

requirements for electrical equipment including that of trolley buses, track

guided buses and magnetic levitation vehicles

Technical Committee No. 269 “Heating boilers, gas cylinders and pressure equipments”,

19 standards


1. EN 16647:2015 Fireplaces for liquid fuels - Decorative appliances producing a flame using

alcohol based or gelatinous fuel - Use in private households

2. EN 13445-10:2015 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels

of nickel and nickel alloys

3. EN 13445-6:2014/A1:2015 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of

pressure vessels and pressure parts constructed from spheroidal graphite cast iron

4. EN 15776:2011+A1:2015 Unfired pressure vessels - Requirements for the design and fabrication of

pressure vessels and pressure parts constructed from cast iron with an

elongation after fracture equal or less than 15 %

5. EN 16678:2015 Safety and control devices for gas burners and gas burning appliances -

Automatic shut-off valves for operating pressure of above 500 kPa up to and

including 6 300 kPa

6. EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or

liquid fuels - Control functions in electronic systems - Methods for classification

and assessment

74

7. EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame

supervision devices

8. EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1:

Pressure regulators for inlet pressures up to and including 50 kPa

9. EN 13611:2015/AC:2016 Safety and control devices for burners and appliances burning gaseous and/or

liquid fuels - General requirements

10. EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries (ISO

17292:2015)

11. EN 16722:2015 Industrial valves - End-to-end and centre-to-end dimensions for valves with

threaded ends

12. EN 736-2:2016 Valves - Terminology - Part 2: Definition of components of valves

13. EN 1503-4:2016 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys

specified in European Standards

14. EN 488:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried

hot water networks - Steel valve assembly for steel service pipes, polyurethane

thermal insulation and outer casing of polyethylene

15. EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried

hot water networks - Fitting assemblies of steel service pipes, polyurethane

thermal insulation and outer casing of polyethylene

16. EN 253:2009+A2:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried

hot water networks - Pipe assembly of steel service pipe, polyurethane thermal

insulation and outer casing of polyethylene

17. EN ISO 13350:2015 Fans - Performance testing of jet fans (ISO 13350:2015)

18. EN 12845:2015/AC:2016 Fixed firefighting systems - Automatic sprinkler systems - Design, installation

and maintenance

19. EN 12309-2:2015/AC:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat input

not exceeding 70 kW - Part 2: Safety

Technical Committee No. 275 “Food product analysis. Containers in contact with food”, 20 standards


1. EN ISO 18743:2015 Microbiology of the food chain - Detection of Trichinella larvae in meat by

artificial digestion method (ISO 18743:2015)

2. CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the

detection of food-borne pathogens - Detection of pathogenic Yersinia

enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015)

3. EN 16156:2010 Cigarettes - Assessment of the ignition propensity - Safety requirement

4. EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes

5. EN ISO 12863:2010/AC:2011 Standard test method for assessing the ignition propensity of cigarettes (ISO

12863:2010/Cor 1:2011)

6. ISO/TS 21872-1:2007 Microbiology of food and animal feeding stuffs - Horizontal method for the

detection of potentially enteropathogenic Vibrio spp. - Part 1: Detection of

Vibrio parahaemolyticus and Vibrio cholerae

75

7. ISO/TS 21872-1:2007/Cor 1:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the


Vibrio parahaemolyticus and Vibrio cholerae

8. ISO/TS 21872-2:2007 Microbiology of food and animal feeding stuffs - Horizontal method for the


species other than Vibrio parahaemolyticus and Vibrio cholerae

9. ISO/TS 22002-1:2009 Prerequisite programmes on food safety - Part 1: Food manufacturing

10. ISO/TS 22002-2:2013 Prerequisite programmes on food safety - Part 2: Catering

11. ISO/TS 22002-3:2011 Prerequisite programmes on food safety - Part 3: Farming

12. ISO/TS 22002-4:2013 Prerequisite programmes on food safety - Part 4: Food packaging

manufacturing

13. ISO/TS 22002-6:2016 Prerequisite programmes on food safety - Part 6: Feed and animal food

production

14. ISO/TS 22113:2012 Milk and milk products - Determination of the titratable acidity of milk fat

15. ISO/TS 3550-3:2015 Cigarettes - Determination of loss of tobacco from the ends - Part 3: Method

using a vibro-bench

16. ISO/TR 22305:2006 Cigarettes - Measurement of nicotine-free dry particulate matter, nicotine,

water and carbon monoxide in cigarette smoke - Analysis of data from

collaborative studies reporting relationships between repeatability,

reproducibility and tolerances

17. ISO 7210:2013 Routine analytical cigarette-smoking machine - Additional test methods for

machine verification

18. ISO 3400:1997 Cigarettes - Determination of alkaloids in smoke condensates - Spectrometric

method

19. ISO 13110:2012 Cigarettes - Determination of menthol in smoke condensates - Gas-

chromatographic method

20. ISO 10315:2013 Cigarettes - Determination of nicotine in smoke condensates - Gas-

chromatographic method

Technical Committee No. 286 “Liquefied petroleum gas equipment”, 10 standards


1. EN ISO 11118:2015 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test

methods (ISO 11118:2015)

2. EN ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing (ISO

11623:2015)

3. EN ISO 21007-2:2015 Gas cylinders - Identification and marking using radio frequency identification

technology - Part 2: Numbering schemes for radio frequency identification (ISO

21007-2:2015)

4. CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within

standards to minimize the environmental impact of gas infrastructure across

the whole life cycle

5. EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements

76

6. CEN/TR 16787:2014 Industrial Gas Installation - Guideline

7. EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas

installations for buildings

8. EN ISO 21009-2:2015 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational

requirements (ISO 21009-2:2015)

9. EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1

000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)

10. EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in

liquid phase and vapour pressure phase

Technical Committee No. 288 “Execution of special geotechnical works”, 1 standard


1. EN 16508:2015 Temporary works equipment - Encapsulation constructions - Performance

requirements and general design

Technical Committee No. 298 “Pigments and varnishes”, 18 standards


1. EN ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of

quantity and size of defects, and of intensity of uniform changes in appearance

- Part 1: General introduction and designation system (ISO 4628-1:2016)

2. EN ISO 4630:2015 Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015)

3. EN ISO 6271:2015 Clear liquids - Estimation of colour by the platinum-cobalt colour scale



- Part 2: Assessment of degree of blistering (ISO 4628-2:2016)



- Part 4: Assessment of degree of cracking (ISO 4628-4:2016)



- Part 4: Assessment of degree of cracking (ISO 4628-4:2016)



- Part 5: Assessment of degree of flaking (ISO 4628-5:2016)



- Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)

77



- Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016)

10. ISO 18314-1:2015 Analytical colorimetry - Part 1: Practical colour measurement

11. ISO 18314-2:2015 Analytical colorimetry - Part 2: Saunderson correction, solutions of the

Kubelka-Munk equation, tinting strength, hiding power

12. ISO 18314-3:2015 Analytical colorimetry - Part 3: Special indices

13. ISO 18451-1:2015 Pigments, dyestuffs and extenders - Terminology - Part 1: General terms

14. ISO 18451-2:2015 Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of

colouring materials according to colouristic and chemical aspects

15. ISO 18473-2:2015 Functional pigments and extenders for special applications - Part 2: Nanoscale

titanium dioxide for sunscreen application

16. ISO 23900-1:2015 Pigments and extenders - Methods of dispersion and assessment of

dispersibility in plastics - Part 1: General introduction


dispersibility in plastics - Part 2: Determination of colouristic properties and

ease of dispersion in plasticized polyvinyl chloride by two-roll milling


dispersibility in plastics - Part 3: Determination of colouristic properties and

ease of dispersion of black and colour pigments in polyethylene by two-roll

milling

Technical Committee No. 304 “Documentation and information”, 39 standards


1. EN ISO 19109:2015 Geographic information - Rules for application schema (ISO 19109:2015)

2. EN ISO 19119:2016 Geographic information - Services (ISO 19119:2016)

3. EN ISO 19135-1:2015 Geographic information - Procedures for item registration - Part 1:

Fundamentals (ISO 19135-1:2015)

4. ISO/IEC Guide 21-1:2005 Regional or national adoption of International Standards and other

International Deliverables - Part 1: Adoption of International Standards

5. ISO/IEC Guide 21-2:2005 Regional or national adoption of International Standards and other

International Deliverables - Part 2: Adoption of International Deliverables other

than International Standards

6. ISO/IEC Guide 59:1994 Code of good practice for standardization

7. ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards

8. ISO/IEC Guide 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation

9. ISO/IEC Guide 77-1:2008 Guide for specification of product properties and classes - Part 1: Fundamental

benefits

10. ISO/IEC Guide 77-2:2008 Guide for specification of product properties and classes - Part 2: Technical

principles and guidance

11. ISO/IEC Guide 77-3:2008 Guide for specification of product properties and classes - Part 3: Experience

gained

78

12. ISO 11107:2009 Recreational diving services - Requirements for training programmes on

enriched air nitrox (EAN) diving

13. ISO 11121:2009 Recreational diving services - Requirements for introductory training

programmes to scuba diving

14. ISO 13289:2011 Recreational diving services - Requirements for the conduct of snorkelling

excursions

15. ISO 13687:2014 Tourism and related services - Yacht harbours - Minimum requirements

16. ISO 13970:2011 Recreational diving services - Requirements for the training of recreational

snorkelling guides

17. ISO 24803:2007 Recreational diving services - Requirements for recreational scuba diving

service providers

18. ISO 14533-1:2014 Processes, data elements and documents in commerce, industry and

administration - Long term signature profiles - Part 1: Long term signature

profiles for CMS Advanced Electronic Signatures (CAdES)

19. ISO 14533-2:2012 Processes, data elements and documents in commerce, industry and

administration - Long term signature profiles - Part 2: Long term signature

profiles for XML Advanced Electronic Signatures (XAdES)

20. ISO 15000-5:2014 Electronic Business Extensible Markup Language (ebXML) - Part 5: Core

Components Specification (CCS)

21. ISO 17369:2013 Statistical data and metadata exchange (SDMX)

22. ISO 6422-1:2010 Layout key for trade documents - Part 1: Paper-based documents

23. ISO 8439:1990 Forms design - Basic layout

24. ISO 8440:1986 Location of codes in trade documents

25. ISO 8440:1986/Cor 1:2000 Location of codes in trade documents

26. ISO 8601:2004 Data elements and interchange formats - Information interchange -

Representation of dates and times

27. ISO 9735:1988 Electronic data interchange for administration, commerce and transport

(EDIFACT) - Application level syntax rules

28. ISO 9735:1988/Amd 1:1992 Electronic data interchange for administration, commerce and transport

(EDIFACT) - Application level syntax rules

29. ISO 9735-1:2002 Electronic data interchange for administration, commerce and transport

(EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax

release number: 1) - Part 1: Syntax rules common to all parts



release number: 2) - Part 10: Syntax service directories



release number: 1) - Part 2: Syntax rules specific to batch EDI



release number: 1) - Part 3: Syntax rules specific to interactive EDI



release number: 1) - Part 4: Syntax and service report message for batch EDI

(message type - CONTRL)

79



release number: 1) - Part 5: Security rules for batch EDI (authenticity, integrity

and non-repudiation of origin)



release number: 1) - Part 6: Secure authentication and acknowledgement

message (message type - AUTACK)



release number: 1) - Part 7: Security rules for batch EDI (confidentiality)



release number: 1) - Part 8: Associated data in EDI



release number: 1) - Part 9: Security key and certificate management message

(message type- KEYMAN)

39. ISO 9959-1:1992 Numerically controlled draughting machines - Drawing test for the evaluation

of performance - Part 1: Vector plotters

Technical Committee No. 305 “Potentially explosive atmospheres. Explosion prevention and

protection”, 7 standards


1. EN 16265:2015 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices

2. EN 15947-5:2015 Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 5:

Requirements for construction and performance

3. EN 15947-4:2015 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods

4. EN 15947-3:2015 Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3: Minimum

labelling requirements

5. EN 15947-1:2015 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 1: Terminology

6. EN 15947-2:2015 Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 2: Categories

and types of firework

7. CEN/TR 16793:2016 Guide for the selection, application and use of flame arresters

80

Technical Committee No. 307 “Food oils and fats. Oilseeds”, 23 standards


1. EN ISO 734:2015 Oilseed meals - Determination of oil content - Extraction method with hexane

(or light petroleum) (ISO 734:2015)

2. EN ISO 22630:2015 Oilseed meals - Determination of oil content - Rapid extraction method (ISO

22630:2015)

3. EN ISO 10519:2015 Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO

10519:2015)

4. EN ISO 29841:2014/A1:2016 Vegetable fats and oils - Determination of the degradation products of

chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO

29841:2009/AMD 1:2016)

5. ISO 10519:2015 Rapeseed - Determination of chlorophyll content - Spectrometric method

6. ISO 10565:1998 Oilseeds - Simultaneous determination of oil and water contents - Method

using pulsed nuclear magnetic resonance spectrometry

7. ISO 10632:2000 Oilseed residues - Simultaneous determination of oil and water contents -

Method using pulsed nuclear magnetic resonance spectroscopy

8. ISO 10633-1:1995 Oilseed residues - Determination of glucosinolates content - Part 1: Method

using high-performance liquid chromatography

9. ISO 14244:2014 Oilseed meals - Determination of soluble proteins in potassium hydroxide

solution

10. ISO 17059:2007 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty

acids for analysis by gas chromatography (Rapid method)

11. ISO 22630:2015 Oilseed meals - Determination of oil content - Rapid extraction method

12. ISO 542:1990 Oilseeds - Sampling

13. ISO 5507:2002 Oilseeds, vegetable oils and fats - Nomenclature

14. ISO 658:2002 Oilseeds - Determination of content of impurities

15. ISO 659:2009 Oilseeds - Determination of oil content (Reference method)

16. ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample

17. ISO 665:2000 Oilseeds - Determination of moisture and volatile matter content

18. ISO 734:2015 Oilseed meals - Determination of oil content - Extraction method with hexane

(or light petroleum)

19. ISO 7700-2:2011 Food products - Checking the performance of moisture meters in use - Part 2:

Moisture meters for oilseeds

20. ISO 8892:1987 Oilseed residues - Determination of total residual hexane

21. ISO 9167-1:1992 Rapeseed - Determination of glucosinolates content - Part 1: Method using

high-performance liquid chromatography

22. ISO 9167-1:1992/Amd 1:2013 Rapeseed - Determination of glucosinolates content - Part 1: Method using

high-performance liquid chromatography

23. ISO 9289:1991 Oilseed residues - Determination of free residual hexane

81

Technical Committee No. 316 “Medical devices utilizing tissues”, 3 standards


1. EN ISO 15225:2016 Medical devices - Quality management - Medical device nomenclature data

structure (ISO 15225:2016)

2. EN ISO 8362-1:2009/A1:2015 Injection containers and accessories - Part 1: Injection vials made of glass tubing

(ISO 8362-1:2009/Amd 1:2015)

3. EN ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials (ISO

8362-2:2015)

Technical Committee No. 320 “Transport. Logistics and services”, 121 standards


1. EN ISO 6218:2015 Inland navigation vessels - Manually- and power-operated coupling devices for

pushing units and coupled vessels - Safety requirements and main dimensions

(ISO 6218:2015)

2. EN ISO 18541-4:2015 Road vehicles - Standardized access to automotive repair and maintenance

information (RMI) - Part 4: Conformance test (ISO 18541-4:2015)

3. EN ISO 9094:2015 Small craft - Fire protection (ISO 9094:2015)

4. EN ISO 21487:2012/A2:2015 Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 2

(ISO 21487:2012/Amd 2:2015)

5. EN 2704:2015 Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn

bars - De ≤ 75 mm

6. EN 2591-315:2015 Aerospace series - Elements of electrical and optical connection - Test methods -

Part 315: Fluid resistance

7. EN 3155-082:2015 Aerospace series - Electrical contacts used in elements of connection - Part 082:

Contacts, electrical, female, type A, crimp, class S - Product standard

8. EN 3660-062:2016 Aerospace series - Cable outlet accessories for circular and rectangular electrical

and optical connectors - Part 062: Cable outlet, style K, 90°, for heat shrinkable

boot, shielded, sealed, self-locking for EN 3645 - Product standard


and optical connectors - Part 063: Cable outlet, style K, straight, for heat

shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard


and optical connectors - Part 064: Cable outlet, style K, straight, for heat

shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard


and optical connectors - Part 065 : Cable outlet, style K, 90°, for heat shrinkable

boot, shielded, sealed, self locking - Product standard

12. EN 4652-412:2015 Aerospace series - Connectors, coaxial, radio frequency - Part 412: Type 4, C

82

interface - Clamp nut assembly version - Square flange receptacle - Product

standard


interface - Clamp nut assembly version - Bulkhead receptacle - Product

standard

14. EN 2633:2015 Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded

bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control

15. EN 3997:2015 Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and

strip - 0,4 mm ≤ a ≤ 6 mm

16. EN 3982:2015 Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates

- 6 mm < a ≤ 160 mm

17. EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the

glass transition temperatures

18. EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method -

Determination of interlaminar fracture toughness energy - Mode I - GIC

19. EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method -

Determination of interlaminar fracture toughness energy - Mode II - GIIC

20. EN 6035:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of

notched and unnotched tensile strength


notched, unnotched and filled hole compression strength

22. EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-

plane shear properties (± 45° tensile test)

23. EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the

compression strength after impact


bearing strength


Contact, electrical, female, type A, crimp, class S, size 8 - Product standard

26. EN 3646-001:2015 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating

temperature 175 °C or 200 °C continuous - Part 001: Technical specification

27. EN 3646-004:2015 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating

temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut

mounting - Product standard


and optical connectors - Part 002: Index of product standards

29. EN 4165-026:2015 Aerospace series - Connectors, electrical, rectangular, modular - Operating

temperature 175 °C continuous - Part 026: Accessories for single module

connector - Product standard


temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug

for 2 and 4 modules, series 3 - Product standard

31. EN 4531-002:2016 Aerospace series - Connectors, optical, circular, single and multipin, coupled by

triple start threaded ring - Flush contacts - Part 002: Specification of

performance and contact arrangements


83

triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641

multimode cable -55 °C to 125 °C - Product standard


triple start threaded ring - Flush contacts - Part 201: Optical contact for EN 4641

singlemode cable -55 °C to 125 °C - Product standard

34. EN 4644-011:2015 Aerospace series - Connector, electrical and optical, rectangular, modular,

rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part

011: Plug, size 1, without mounting holes, class A, C and E - Product standard



012: Receptacle, size 1, class A, C and E - Product standard



013: Plug, size 1, with ground block, without mounting holes, class B and F -

Product standard



014: Receptacle, size 1, with ground block, class B and F - Product standard



021: Plug, size 2, without mounting holes, class A, C and E - Product standard



022: Plug, size 2, with mounting holes, class A, C and E - Product standard



023: Plug, size 2, with ground block, class B and F - Product standard



024: Receptacle size 2, class A, C and E - Product standard



025: Receptacle, size 2, with flange, class A, C and E - Product standard



026: Receptacle size 2 with ground block, class B and F - Product standard



131: Size 3 plug for rack and panel applications, class C and D - Product

standard



201: Locking and polarizing hardware - Product standard


Contacts, electrical, female, type A, crimp, class R - Product standard


84

Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard


and optical connectors - Part 001: Technical specification


temperature 175 °C continuous - Part 001: Technical specification

50. EN 4652-210:2015 Aerospace series - Connectors, coaxial, radio frequency - Part 210: Type 2, TNC

interface - Clamp nut assembly version - Straight plug - Product standard

51. EN 4652-213:2015 Aerospace series - Connectors, coaxial, radio frequency - Part 213: Type 2, TNC


standard

52. EN 4652-311:2015 Aerospace series - Connectors, coaxial, radio frequency - Part 311: Type 3, N

interface - Clamp nut assembly version - Right angle plug - Product standard


interface - Clamp nut assembly version - Square flange receptacle - Product

standard



standard


interface - Clamp nut assembly version - Straight plug - Product standard


interface - Clamp nut assembly version - Right angle plug - Product standard

57. EN 4710-01:2015 Aerospace series - Quick release fastening systems for non-structural

applications - Part 01: Technical specification


applications - Part 02: Spring clamp stud combination


applications - Part 03: Spring clamp


applications - Part 04: Spring clamp - One way tolerance compensation


applications - Part 05: Spring clamp - Two ways tolerance compensation


applications - Part 06: Stud - quick-release and locking


applications - Part 07: Retaining grommet

64. EN 4830-001:2015 Aerospace series - Connectors, optical, rectangular, modular, operating

temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification


temperature 125 °C, for EN 4639-10X contacts - Part 002: Specification of

performance


temperature 125 °C, for EN 4639-10X contacts - Part 003: Module - Product

standard


temperature 125 °C, for EN 4639-10X contacts - Part 004: Extraction tool -

85

Product standard

68. EN 9131:2016 Aerospace series - Quality Management Systems - Nonconformance Data

Definition and Documentation

69. EN 9102:2015 Aerospace series - Quality systems - First article inspection requirements

70. EN 9114:2015 Aerospace series - Quality systems - Direct Ship Guidance for Aerospace

Companies

71. EN 9116:2015 Aerospace series - Notice of Change (NOC) Requirements

72. EN 9103:2014/AC:2015 Aerospace series - Quality management systems - Variation management of key

characteristics

73. EN 4165-001:2015/AC:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating

temperature 175 °C continuous - Part 001: Technical specification

74. ISO 1964:1987 Shipbuilding - Indication of details on the general arrangement plans of ships

75. ISO 5572:1987 Shipbuilding and marine structures - Numbering of equipment and structural

elements in ships

76. ISO 14829:2002 Freight containers - Straddle carriers for freight container handling -

Calculation of stability

77. ISO 8864:1987 Air-conditioning and ventilation of wheelhouse on board ships - Design

conditions and basis of calculations

78. ISO 9099:1987 Air-conditioning and ventilation of dry provision rooms on board ships -

Design conditions and basis of calculations

79. ISO 16488:2015 Marine finfish farms - Open net cage - Design and operation

80. ISO 13795:2012 Ships and marine technology — Ship's mooring and towing fittings — Welded

steel bollards for sea-going vessels

81. ISO 5480:1979 Shipbuilding - Guardrails for cargo ships

82. ISO 15401:2000 Ships and marine technology - Bulk carriers - Construction quality of hull

structure

83. ISO 15402:2000 Ships and marine technology - Bulk carriers - Repair quality of hull structure

84. ISO 7462:1985 Shipbuilding - Principal ship dimensions - Terminology and definitions for

computer applications

85. ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using

manoeuvring speed - Part 1: Craft with a length of hull less than 8 m

86. ISO 15370:2010 Ships and marine technology - Low-location lighting (LLL) on passenger ships -

Arrangement

87. ISO 17339:2002 Ships and marine technology - Sea anchors for survival craft and rescue boats

88. ISO 7255:1985 Shipbuilding - Active control units of ships - Vocabulary

89. ISO 15583:2005 Ships and marine technology - Maritime standards list

90. ISO 6621-1:2007 Internal combustion engines - Piston rings - Part 1: Vocabulary

91. ISO 6621-2:2003 Internal combustion engines - Piston rings - Part 2: Inspection measuring

principles

92. ISO 6621-3:2000 Internal combustion engines - Piston rings - Part 3: Material specifications

93. ISO 6621-4:2015 Internal combustion engines - Piston rings - Part 4: General specifications

94. ISO 6621-5:2013 Internal combustion engines - Piston rings - Part 5: Quality requirements

95. ISO 6622-1:2003 Internal combustion engines - Piston rings - Part 1: Rectangular rings made of

cast iron

96. ISO 6622-2:2013 Internal combustion engines - Piston rings - Part 2: Rectangular rings made of

steel

86

97. ISO 6623:2013 Internal combustion engines - Piston rings - Scraper rings made of cast iron

98. ISO 6624-1:2001 Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast

iron

99. ISO 6624-2:2016 Internal combustion engines - Piston rings - Part 2: Half keystone rings made of

cast iron

100. ISO 6624-3:2001 Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel

101. ISO 6624-4:2016 Internal combustion engines - Piston rings - Part 4: Half keystone rings made of

steel

102. ISO 6625:1986 Internal combustion engines - Piston rings - Oil control rings

103. ISO 6626:1989 Internal combustion engines - Piston rings - Coil-spring-loaded oil control rings

104. ISO 6626-3:2008 Internal combustion engines - Piston rings - Part 3: Coil-spring-loaded oil

control rings made of steel

105. ISO 6626-2:2013 Internal combustion engines - Piston rings - Part 2: Coil-spring-loaded oil

control rings of narrow width made of cast iron

106. ISO 6627:2011 Internal combustion engines - Piston rings - Expander/segment oil-control rings

107. ISO 8861:1998 Shipbuilding - Engine-room ventilation in diesel-engined ships - Design

requirements and basis of calculations

108. ISO 8862:1987 Air-conditioning and ventilation of machinery control-rooms on board ships -

Design conditions and basis of calculations

109. ISO 11026:2010 Heavy commercial vehicles and buses - Test method for roll stability - Closing-

curve test

110. ISO 16333:2011 Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-

table test method

111. ISO 14794:2011 Heavy commercial vehicles and buses - Braking in a turn - Open-loop test

methods

112. ISO 14792:2011 Road vehicles - Heavy commercial vehicles and buses - Steady-state circular

tests

113. ISO 15037-2:2002 Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for

heavy vehicles and buses

114. ISO 15037-1:2006 Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for

passenger cars

115. ISO 7646:1986 Commercial vehicles and buses - Gearbox flanges - Type A

116. ISO 7647:1986 Commercial vehicles and buses - Gearbox flanges - Type S

117. ISO 1585:1992 Road vehicles - Engine test code - Net power

118. ISO 4093:1999 Diesel engines - Fuel injection pumps - High-pressure pipes for testing

119. ISO 4008-1:1980 Road vehicles - Fuel injection pump testing - Part 1: Dynamic conditions

120. ISO 12219-1:2012 Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification

and method for the determination of volatile organic compounds in cabin

interiors

121. ISO 4020:2001 Road vehicles - Fuel filters for diesel engines - Test methods

87

Technical Committee No. 336 “Bituminous binders. Road materials”, 13 standards


1. EN 16659:2015 Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test

(MSCRT)

2. EN 13924-1:2015 Bitumen and bituminous binders - Specification framework for special paving

grade bitumen - Part 1: Hard paving grade bitumens

3. EN 14227-15:2015 Hydraulically bound mixtures - Specifications - Part 15: Hydraulically

stabilized soils

4. CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining

the skid resistance of a pavement surface using a device with longitudinal

controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech

AS)

5. CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid

and liquid de-icing agents - Requirements and test methods

6. ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal

combustion engine driven cut-off machines - Safety requirements

7. ISO 11904-1:2002 Acoustics - Determination of sound immission from sound sources placed close

to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique)

8. ISO 11904-1:2002/Cor 1:2004 Acoustics - Determination of sound immission from sound sources placed close

to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique)

9. ISO 11904-2:2004 Acoustics - Determination of sound immission from sound sources placed close

to the ear - Part 2: Technique using a manikin

10. ISO 16:1975 Acoustics - Standard tuning frequency (Standard musical pitch)

11. ISO 16832:2006 Acoustics - Loudness scaling by means of categories

12. ISO 266:1997 Acoustics - Preferred frequencies

13. ISO 532:1975 Acoustics - Method for calculating loudness level

Technical Committee No. 360 “Fresh fruit and vegetables”, 23 standards


1. EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten

and gluten index by mechanical means (ISO 21415-2:2015)

2. EN ISO 11085:2015 Cereals, cereals-based products and animal feeding stuffs - Determination of

crude fat and total fat content by the Randall extraction method (ISO

11085:2015)

3. EN ISO 7973:2015 Cereals and milled cereal products - Determination of the viscosity of flour -

Method using an amylograph (ISO 7973:1992)

4. EN ISO 5223:2015 Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999)

5. EN 16760:2015 Bio-based products - Life Cycle Assessment

88

6. EN 16785-1:2015 Bio-based products - Bio-based content - Part 1: Determination of the bio-based

content using the radiocarbon analysis and elemental analysis

7. ISO 6820:1985 Wheat flour and rye flour - General guidance on the drafting of bread-making

tests

8. ISO 7970:2011 Wheat (Triticum aestivum L.) -Specification

9. ISO 874:1980 Fresh fruits and vegetables -Sampling

10. ISO 2167:1991 Round-headed cabbage - Guide to cold storage and refrigerated transport

11. ISO 6000:1981 Round-headed cabbage - Storage in the open

12. ISO 2166:1981 Carrots - Guide to storage

13. ISO 949:1987 Cauliflowers - Guide to cold storage and refrigerated transport

14. ISO 7560:1995 Cucumbers - Storage and refrigerated transport

15. ISO 9833:1993 Melons - Cold storage and refrigerated transport

16. ISO 6659:1981 Sweet pepper - Guide to refrigerated storage and transport

17. ISO 5525:1986 Potatoes - Storage in the open (in clamps)

18. ISO 2165:1974 Ware potatoes - Guide to storage

19. ISO 9376:1988 Early potatoes - Guide to cooling and refrigerated transport

20. ISO 6822:1984 Potatoes, root vegetables and round-headed cabbages - Guide to storage in silos

using forced ventilation

21. ISO 5524:1991 Tomatoes - Guide to cold storage and refrigerated transport

22. ISO 7304-2:2008 Alimentary pasta produced from durum wheat semolina -Estimation of

cooking quality by sensory analysis - Part 2: Routine method

23. ISO 7304-1:2016 Durum wheat semolina and alimentary pasta - Estimation of cooking quality of

alimentary pasta by sensory analysis - Part 1: Reference method

WORK PROGRAMME - DPS month Work Programme… · WORK PROGRAMME of General ... EN 60404-5:2015...

Documents

Transcript of WORK PROGRAMME - DPS month Work Programme… · WORK PROGRAMME of General ... EN 60404-5:2015...