Wood Section
-
Upload
7043578600 -
Category
Documents
-
view
215 -
download
0
Transcript of Wood Section
-
8/2/2019 Wood Section
1/28
Alder Lumber
Grown on the west coast between Alaska andSouthern California Alder is commerciallyharvested in the moist regions of western Oregonand Washington. This Birch relative is fine-textured and light weight. The grain pattern issimilar to Birch, Cherry and Soft Maple; it can alsobe finished to blend with Walnut or Mahogany.
Ash Lumber
Best known for its stability and impact resistanceAsh lumber is widely used for ball bats, hockey sticksand tool handles. Ash is also well suited for furnitureuse and remains a popular wood for kitchencabinets. The heartwood ranges from tan to darkbrown and the sapwood will run white to off-white.
Basswood Lumber
Basswood can be found throughout most of theeastern United States and is one of the softesthardwood species in commercial use. Noted forfine, even grain its exceptionally stable.Heartwood is very light brown and the sapwood isnearly white. While its ideal for carving andturning Basswood is also used for picture framemouldings, wood novelties and other objects requiring a clean looking,light colored wood.
Beech LumberBeech is hard, heavy and strong. Its well suited forflooring, furniture and food containers. Beechaccepts stains and finishes well and can be used asan alternative to Hard Maple although darker in colorand slightly more coarse in texture. Heartwood runspale brown to reddish brown and the sapwood isusually distinct and light colored.
Birch Lumber
Birch is especially popular for furniture, fixtures,cabinetry and doors. The heartwood is cream or lightbrown and the sapwood is a yellowish white. Lumbercan also be sorted for White Birch (all sapwood oneface) or Red Birch (all heartwood one face). Birch ismoderately heavy, hard and strong.
Aromatic Cedar Lumber
The spicy cedar-like smell makes this specie widelyrecognized. Most commonly used in closets, storagecabinets and chests the lumber will have a white to creamcolored sapwood with light brown to red heartwood.Aromatic Cedar lumber is graded No. 1 Common and willhave 3-4 average widths and run 5-6 long.
Cherry Lumber
Cherry is considered one of the premier Americancabinet wood species. Its a fine-grained, hard and strongwood. Cherry can be finished to glass-like smoothnessand is exceptionally stable. Small gum pockets are anormal characteristic. Heartwood lumber will appearreddish-brown and the sapwood will be a lighter yellowbrown color.
Cypress Lumber
Lightweight, fine-grained and easily worked Cypress is used for millwork,cabinets, wall paneling, and furniture. It holds paint well and is resistant tochemicals, dampness and insects. Cypress lumber is light orange/brownin color.
Ref# Grade Thickness Ripped
44ALD superior surfaced straight line
44ALDC cabinet surfaced no
Ref# Grade Thickness Ripped
44ASH FAS 1 face & better surfaced straight line
84ASHNS FAS 1 face & better surfaced 1 no
Ref# Grade Thickness Ripped44BW select & better surfaced straight line
44BW1C #1 common surfaced straight line
44BW1CHH #1 common surfaced straight line
44BW78 select & better surfaced straight line
84BW select & better surfaced 1 straight line
84BWR select & better rough no
Ref# Grade Thickness Ripped
44BEECH select & 1 face better
44EB superior surfaced straight line
Ref# Grade Thickness Ripped
44BCH select & better surfaced straight line
84BCHR select & better rough no
White Birch
44BCHS select & better surfaced straight line
Ref# Grade Thickness Ripped
44ARC #1 common surfaced no
44ARCR #1 common rough no
Ref# Grade Surface Thickness Ripped44CH1C #1 common surfaced straight Line
44CH select & better surfaced straight line
44CH78 select & better surfaced straight line
44CHR select & 1 face better rough no
54CHR select & better rough no
64CHNS select & 1 face better surfaced 1 no
64CHR select & better rough no
84CHNS select & 1 face better surfaced 1 no
84CHR select & better rough no
Ref# Grade Thickness Ripped
44CYP select surfaced straight line
44CYPR select rough no
-
8/2/2019 Wood Section
2/28
Hickory Lumber
Hickory is the hardest, heaviest and strongestAmerican wood. The heartwood is pale to reddishbrown and the sapwood is white. The grain is straightbut can be wavy or irregular and the texture is coarse.Most commonly used for furniture, cabinetry andflooring.
Hickory and Pecan are members of the Walnut family
and are so closely related that individual specimensof Hickory and Pecan cannot be identified with any certainty.
Mahogany Lumber
The heartwood of mahogany is pale brown or pink to dark reddish brown.
The grain is straight and the growth rings are distinct. Texture is mediumand uniform. Mahogany is easy to work and produces very good results inall operations. Most commonly used in furniture, cabinets and flooring.
Soft Maple Lumber
Soft maple heartwood varies from light to darkreddish brown and the sapwood is greyish white.The wood glues, screws, and nails satisfactory. Itsgrain is usually straight and can be stained to anexcellent finish. It is good for steam-bending and islow in stiffness and shock resistance.
Hard Maple Lumber
Hard maple heartwood varies from light to darkreddish brown and its sapwood creamy white with a
slight reddish brown tinge. The wood is hard andheavy with good strength properties. The wood hasa close fine, uniform texture and is generally straight-grained, but it can also occur as curly, fiddleback,and birds-eye figure. Hard maple screws and gluessatisfactory but pre-boring is recommended fornailing. Most commonly used for furniture, kitchen cabinets, butcherblocks, ballroom and gymnasium floor.
Ref# Grade Thickness Ripped
44HIC FAS 1 face & better surfaced straight line
Ref# Grade Thickness Ripped
African Mahogany
44AMAH FAS surfaced straight line
54AMAH FAS surfaced 1 no
64AMAH FAS surfaced 1 no84AMAH FAS surfaced 1 no
Genuine Mahogany
44HMAH FAS surfaced straight line
44HMAHPG FAS surfaced straight line
44HMAHPGR FAS -pattern rough no
44HMAHR FAS rough no
54HMAHPGR FAS -pattern rough no
54HMAHR FAS rough no
64HMAHR FAS rough no
84HMAHPGR FAS-pattern rough no
84HMAHR FAS rough no
Ref# Grade Thickness Ripped
44SMAPS34 select & better surfaced straight line
44SMAPPT paint surfaced straight line
44SMAP select & better surfaced straight line
44SMAPPG paint rough no
44SMAP78 select & 1 face better surfaced straight line
44SMAP1516 select & better surfaced straight line
44SMAPR select & 1 face better rough no
54SMAPR select & better rough no
84SMAPNS select & 1 face better rough no
84SMAPR select & better rough no
Ref# Grade Thickness Ripped
44HMAP select & better surfaced straight line
44HMAP58NS select & better surfaced no
44HMAPPG paint surfaced straight line
44HMAPR select & better rough no
54HMAPR select & 1 face better rough no
64HMAPR select & better rough no
84HMAPR select & 1 face better rough no
84HMAPNS select & better surfaced 1 no
Curly Hard Maple
44CMAP pulled to figure surfaced straight line
Pacific Coast Maple
44PCMAP select & better surfaced straight line
Birdseye Maple
44BMAPR select & better rough no
-
8/2/2019 Wood Section
3/28
Red Oak Lumber
Red Oak heartwood is a pinkish reddish brownand the sapwood is white to light brown. Thewood is hard and heavy, with medium bendingstrength. The grain is mostly straight andcourse textured. Pre-boring is recommendedwhen nailing and screwing. Red oak can bestained to a good finish and a wide range of
finish tones can be used.
White Oak Lumber
The name White Oak is a misnomer becausethe wood is not actually white in color butrather tan or light brown. The hard and heavywood is very good for steam bending and hasgreat wear resistance. The grain is mostlystraight and has a medium course texture. Itstains to a good finish and a wide range of
finish tones can be used.
Furniture Grade Pine Lumber
The sapwood of pine is white to pale yellow andthe heartwood is cream to light brown. Thewood is very workable when it comes to nailing,
gluing, sanding, and carving. Paint, stain orvarnish can be applied to a good finish. Tightsound knots are admitted without limit infurniture grade.
Pine Shelving
Pines sapwood is white to pale yellow and the heartwood is cream to lightbrown. The wood can be stained, varnished or painted to a good finish.When it comes to building shelves, pine is not only strong but very durabletoo. Pine shelving come in a variety of sizes but the standard is 12.
Ref# Grade Thickness Ripped
Red Oak
44RO FAS 1 face & better surfaced straight line
44RO10+ FAS 1 face & better surfaced straight line
44RO1516 FAS 1 face & better surfaced straight line
44RO1516NS FAS 1 face & better surfaced no
44RO1516X8 FAS 1 face & better surfaced gang
44RO1C #1 common rough no
44RO78 FAS 1 face & better surfaced straight line
44ROR FAS 1 face & better rough no
54RONAR FAS 1 face & better surfaced 1 straight line
54ROR FAS 1 face & better rough no
54RONS FAS 1 face & better surfaced no
64RONS FAS 1 face & better surfaced 1 no64ROR FAS 1 face & better rough no
84RO FAS 1 face & better surfaced 1 straight line
84RONS FAS 1 face & better surfaced 1 no
84ROR FAS 1 face & better rough no
Northern Appalachian Red Oak
44RONA FAS 1 face & better surfaced straight line
44RONA1C #1 common surfaced straight line
Red Oak Pink Color
44ROP FAS 1 face & better surfaced straight line
Quarter Sawn Red Oak
44ROQTRS select & better surfaced straight line
Rift Red Oak
44RORIFTR select & better rough no
Red Oak Wheat Color
44ROW FAS 1 face & better surfaced straight line
Ref# Grade Thickness Ripped
White Oak
44WO FAS 1 face & better surfaced straight line
54WOR FAS 1 face & better rough no
84WONS FAS 1 face & better surfaced 1 no
84WOR FAS 1 face & better rough no
Quarter Sawn White Oak
44WOQTRS FAS 1 face & better surfaced straight line
Ref# Grade Thickness Ripped
Eastern White Pine
44FGEP furniture surfaced straight line
44FGEP1516 furniture surfaced straight line
84FGEP furniture rough no
Ref# Grade Size
Ponderosa Pine
1122PP #2 common 1x12
1123PP #3 common 1x12
Sugar Pine
1122SP #2 common 12
-
8/2/2019 Wood Section
4/28
Poplar Lumber
Poplar heartwood is pale yellowish brown to olivegreen and the sapwood is creamy white. Withexposure to light the olive green color heartwoodwill turn to brown. The medium density wood hasexcellent strength and stability. The grain isstraight and the texture is medium to fine. Poplarcan be painted and stained to an excellent finish.
Wide widths and long lengths are more abundantin this than almost any other domestic species.
Walnut Lumber
Walnut heartwood is light brown to dark chocolatebrown and the sapwood is creamy white. The grainis generally straight but can be wavy or curly. Itnails, glues, and screws well and can be stained to
an exceptional finish. Walnut is a tough hardwoodof medium density and is good for steam bending.Most commonly used for furniture, cabinets, doorsand flooring.
Surfaced 4 Sides Lumber
Dont have time or the equipment to runthe lumber through the planer for asmooth surface? Then our S4S stock(surfaced four sides) might be a solution.Available in a wide variety of sizes,thickness and species.
Ref# Grade Thickness Ripped
44POP FAS & 1 face better surfaced straight Line
44POP10+ FAS & 1 face better surfaced straight Line
44POP1C #1 Common surfaced straight Line
44POP34 FAS & 1 face better surfaced straight Line
44POP78 FAS & 1 face better surfaced straight Line44POPR FAS & 1 face better rough no
54POP FAS & 1 face better surfaced 1 straight Line
54POPR FAS & 1 face better rough no
64POP FAS & 1 face better surfaced 1 straight Line
64POPNS FAS & 1 face better surfaced 1 no
64POPR FAS & 1 face better rough no
84POP FAS & 1 face better surfaced 1 straight Line
84POPNS FAS & 1 face better surfaced 1 no
84POPR FAS & 1 face better rough no
Ref# Grade Thickness Ripped
44WAL FAS 1 face & better surfaced straight Line
64WALR FAS 1 face & better rough no
84WALR FAS 1 face & better rough no
Ref# Nominal Size Actual Thickness Actual Width
Alder
AL18S4S 1 X 8 7
Cherry
CHE16S4S 1 X 6 5
Hickory
HIC16S4S 1 X 6 5
Knotty Pine
KP16S4S 1 X 6 5
Hard Maple
HM16S4S 1 X 6 5
Soft Maple
MAP16S4S 1 X 6 5
MAP18S4S 1 X 8 7
Poplar
POP110S4S 1 X 10 9
POP112S4S 1 X 12 11
POP16S4S 1 X 6 5
POP18S4S 1 X 8 7
Red Oak
12RO X
34RO X
RO112S4S 1 X 12 11
RO16S4S 1 X 6 5
RO18S4S 1 X 8 7
RO24S4S 2 X 4 1 3
RO26S4S 2 X 6 1 5
RO28S4S 2 X 8 1 5
RO110S4S 1 X 10 9
Walnut
W16S4S 1 X 6 5
-
8/2/2019 Wood Section
5/28
Faceplate
Face Frame cabinets are the most commonly builtcabinet style in the United States. To help yousave time in construction we offer the ready toassemble components. These S4S products comein a variety of species, sizes and are shipped inrandom lengths.
All items are 3/4 thick
Ref# Width
Alder
ALFP10* 10
ALFP125 1
ALFP2 2
ALFP225 2
ALFP325 3
ALFP4 4
ALFP425 4
ALFP525 5
ALFP625 6
Basswood
BWFP15 1
BWFIRRING 1
BWFP2 2
Cherry
CFP2 2
Maple
MFP10 10
MFP125 1
MFP2 2
MFP225 2
MFP325 3
MFP425 4
MFP525 5
MFP625 6
PoplarPOPFP10 10
POPFP125 1
POPFP15 1
POPFP2 2
POPFP225 2
POPFP325 3
POPFP425 4
POPFP525 5
POPFP625 6
Red Oak
ROFP10 10
ROFP125 1
ROFP15 1
ROFP2 2ROFP225 2
ROFP25 2
ROFP3 3
ROFP325 3
ROFP35 3
ROFP4 4
ROFP425 4
ROFP525 5
ROFP625 6
Ref# Width
-
8/2/2019 Wood Section
6/28
Hardwood Plywood Core OptionsMost of our hardwood plywood inventory is Veneer, MDF or Particleboardconstruction. These are the most commonly used substrates. There arehowever alternative options available. Please contact your salesrepresentative for pricing and availability.
Veneer Core - Made up of wood veneer inner plies (usually Poplar),Veneer core is light in weight and offers good strength and stability. The
drawback is that thickness variance can be +0 / -3/64; this is the HPVAindustry standard specification. Veneer core remains the most popularoption because of the all wood construction and light weightcharacteristics.
Particleboard (PBC) - This is the least expensive of the core options.PBC offers a smooth, void-free surface for veneer lay-up. PBC providestight thickness tolerances but is heavy; a 3/4 panel can weigh as much as100lbs. PBC has the least amount of structural strength compared toother cores and is subject to the greatest amount of expansion if exposedto moisture.
Medium Density Fiberboard (MDF) - MDF offers great stability and isthe least likely to react when subjected to a measurable change inenvironment. It offers a very smooth, void-free surface for veneer lay-up.MDF has greater strength and screw holding properties than PBC. LikePBC however, MDF is one of the heavier core options. This core isespecially well suited for thin panel applications such as door inserts andpaneling.
Woodstalk - This composite core is manufactured from wheat-straw.There is no added formaldehyde in the raw materials or the resin used tobond the core. It offers a very smooth and void free surface. ColumbiaForest Products uses a no added formaldehyde glue line to bond theveneers to the core. Woodstalk with veneer overlay is offered exclusivelythrough Columbia Forest Products.
Classic Core I - Constructed of veneer core inner plies with PBC cross-bands. It offers similar strength and stability to veneer core but has thevoid-free surface quality of PBC. Excellent substrate for the thin slicedwoods and even rotary woods, reducing the potential for core transfer.This core tends to offer more consistent tolerances than standard veneercore.
Classic Core II - Similar to Classic Core I except the cross band is MDFrather than PBC. Columbia introduced this core in response to customersissues with the potential for chip out with Classic Core I.
Jaycore - The two biggest issues end-uses have had with veneer core inrecent years are thickness variation and core transfer. As a result,Columbia introduced a panel which addresses both of these challenges.Jaycore is a calibrated platform. The core is sent through a size sanderbefore laminating the face and back veneers. With Jaycore, voids are
repaired in crossbands.
Jay-Classic IV - This is the Best of all possible cores. Originallyengineered for a large OEM, this core has a thinner MDF crossband thanClassic Core II, thus an overall increased volume of veneer inner plies. Italso weighs less than other Classic Core options. When you examine theprofile of this panel it is very difficult to see the composite line. The corecomes with a 2-step sanded blank which offers tighter thicknesstolerances than standard veneer cores. Jay-Classic IV is the best coreoffered in terms of strength, stability, surface quality and thicknesstolerance.
Types of Veneer CutsThe manner in which a log segment is cut with relation to the annual ringswill determine the appearance of the veneer. The principal methods ofslicing veneers are Rotary, Plain Slicing (or Flat Slicing), Quarter Slicing(or Quarter Cut), and Rift Slicing (or Rift Cut).
Rotary
The log is centeredmounted on a lathe andpeeled along the generalpath of the growth rings likeunwinding a roll of paper,providing a generally boldrandom appearance. Rotarycut veneers may vary inwidth and matching atveneer joints is extremelydifficult. The only way in
which a whole piece faceveneer can be cut.
Plain Sliced
This slicing method is most oftenused to product veneers for highquality architecturalwoodworking. Slicing is doneparallel to a line through thecenter of the log. A combinationof cathedral and straight grainpatterns results, with a naturalprogression of pattern.
-
8/2/2019 Wood Section
7/28
Matching Between Adjacent Veneer SegmentsIt is possible to achieve certain visual effects by the manner in whichveneer pieces are arranged. Rotary Cut veneers are usually whole pieceface, but if spliced, they are difficult to match. As a result, most matching isdone with sliced veneers. The most common types of matching are Book,Slip, and Random.
Book Matching
The most commonly used match in the industry. Every other piece ofveneer is turned over so adjacent pieces are opened like the pages of abook.
Slip Matching
Often used with quarter slicing and rift sliced veneers. Adjoining pieces
are placed (slipped out) in sequence without turning, resulting in all thesame face sides being exposed.
Random Matching
Veneer pieces are placed next to each other in a random order andorientation, producing a board-by-board effect in many species.
Rift Slicing
Rift veneers are produced mostoften in Red and White Oak, rarelyin other species. Note that riftveneers and rift sawn solid lumberare produced so differently that amatch between the two is highlyunlikely. In both cases the cuttingis done slightly off the radius linesminimizing the flake associatedwith quarter slicing.
Quarter Slicing
Quarter slicing simulates the quartersawing process of solid lumber,roughly parallel to a radius line throughthe log segment. In many species theindividual veneer segments are narrowas a result. A series of stripes isproduced, varying in density andthickness from species to species.Flake is a characteristic of thismethod in Red and White Oak.
-
8/2/2019 Wood Section
8/28
Guide to Hardwood Plywood GradesWere proud to offer our customers one of the most diverse plywoodofferings in the industry. But unlike laminate, veneer plywood in everygrade has defects. The number and size of the defects will determinethe grade.
What we present here is a representative guide to each grade. Pleasenote that each species is subject to specific grade rules. Please consultyour sales representative for further information.
Face Grades A B C D
Birch, Ash, Maple, and Poplar: Rotary Cut, Quarter Cut, Plain Sliced
Pin Knots and SmallBurls, Comb. Avg.
10 -
4 can be1/4
16 -
8 can be1/4
No Limit No Limit
Conspicuous Burls,Max.
3/8 1/2 No Limit No Limit
Sound and RepairedKnots in Comb.
No 4 8 10
Repaired Knots No 4 to 1/8 4 to 1/2 5 to 3/4
Mineral Streak Slight Yes Yes Yes
Vine Slight Yes Yes Yes
Rough cut No Slight Two 8
Areas
5% of
PanelBlended RepairedTapering HairlineSplits
Two
1/16x6
Four
1/8x8
Four
3/16x8
Six
1/4x10
Face Grades A B C D
Red and White Oak; Rotary Cut, Quarter Cut, Plain Sliced
Pin Knots and SmallBurls, Comb. Avg.
12 -
10 can be1/4
24 -
16 can be1/4
No Limit No Limit
Sound and RepairedKnots in Comb.
No 4 8 10
Repaired Knots No 4 to 1/8 4 to 1/2 5 to 3/4
Mineral Streak Slight Few to 8 Yes to 12 Yes
Sap 5% Up to 20% Yes Yes
Blended Repaired
Tapering HairlineSplits
Two
1/16x6
Four
1/8x8
Four
3/16x8
Six
1/4x10
Back Grades 1 2 3 4
Sound Tight Knots 16
up to 3/8
16
up to 3/4
Max 16
1/2-1-1/2
Yes
Knotholes No AllRepaired
All 3/8with 10 upto 1
Up to 4
Repaired Knots No 8
up to 1/2
No No
Sound Tight Burls Yes Yes Yes Yes
Mineral/Sap Yes/Yes Yes/Yes Yes/Yes Yes/Yes
Rough Cut Two 8Dia. Areas
Yes Yes Yes
Splits or Joints Six
1/8x12Repaired
Six
3/16x12
Repaired
3/8x1/4
LOP
1 x 1/4LOP, 1/2to 1/2LOP, 1/4
to full LOP
Veneer Selection Select Veneer is composed entirely of heartwood or sapwood and ismatched for grain, pattern and color.
Uniform Veneer is also composed entirely of heartwood or sapwood,but is matched for color only.
Natural Veneer is composed of both heartwood and sapwood and isgenerally less expensive than select or uniform veneers
Paint Grade Veneer has a smooth enough finish so none of the wood
grain characteristics show through the paint. Stain Grade Veneer is meant to take a clear or tinted stain and still showthe natural characteristics of the wood.
Shop GradeShop Grade plywood is available in every species on an accumulatedbasis. When the mill has produced enough shop in a specific specieswere able to offer the product at a discount.Shop Grade plywood is the result of a manufacturing defect; press faults,veneer overlap, core gaps/laps, splice lines, sand thru, etc. Each sheetshould allow 85% yield however.Shop is produced in one of two ways; Falldown or Manufactured. Falldown
panels have been downgraded during the manufacturing process whileManufactured Shop is produced to be Shop from designated veneers.
Face Grade ApplicationsAA - The best quality face grade for high end use such as architecturalpaneling, doors, and cabinets, case goods and quality furniture.
A - Where AA is not required but excellent appearance is very importantas in cabinets and furniture.
B - Where the natural characteristics and appearance of the species are
desirable.C and D - Provide sound surfaces but allow unlimited color variation.Should be used in applications where the surface will be hidden or a morenatural appearance is desired.
-
8/2/2019 Wood Section
9/28
COLUMBIA FOREST PRODUCTS
Alder Plywood
Alder has a color ranging from white to pinkish brown. The pattern is fine textured. Popular choice for cabinet and furniture of all types.
COLUMBIA FOREST PRODUCTS
Ash Plywoods
Ash is similar to oak with its prominent, open grain. Its heartwood is light tan to brown in color and its sapwood is creamy white.
COLUMBIA FOREST PRODUCTS
Birch Plywood
Rotary cut Birch is the most popular hardwood plywood. Available in select, uniform and natural veneers, birch ranges in color from cream to light brown.Adaptable as a paint or stain grade panel, top quality birch plywood is used for cabinets in many kitchens and in fine furniture. Lower grade panels areoften used for shelving and industrial furniture products.
Ref# Thickness Grade Cut Core Size
14ALDA4PS A-4 Plain Sliced Veneer 4 x 8
14ALDB4 B-4 Plain Sliced Veneer 4 x 8
34ALDA1PS A-1 Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
34AA1N A-1 Rotary Veneer 4 x 8
34AA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8
34AA1PS A-1 Select White Plain Sliced Veneer 4 x 8
14AG1SN B-4 Rotary Veneer 4 x 8
14AG1SPS B-4 Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
18BG1S B-4 Rotary Veneer 4 x 8
14BB2W1FCBEAD B-2 Uniform White Rotary, Whole Piece Face, Beaded MDF 4 x 8
14BB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
14BB2NPBC B-2 Rotary Particle Board 4 x 8
14BEADBIR B-4 Rotary, Beaded MDF 4 x 8
14BB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
14BB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
14BG1S B-4 Rotary Veneer 4 x 8
14BG2SFC
B-2 Rotary MDF 4 x 814BREDG1S B-4 Red Rotary Veneer 4 x 8
14BC4W1 C-4 Even Tone Rotary, Whole Piece Face Veneer 4 x 8
14BREDC21FC C-2 Red Rotary, Whole Piece Face MDF 4 x 8
14BSH Shop Rotary Veneer 4 x 8
12BB2N B-2 Rotary Veneer 4 x 8
12BB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
12BB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8
12BB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
12BREDB1FC B-1 Red Rotary MDF 4 x 8
-
8/2/2019 Wood Section
10/28
COLUMBIA FOREST PRODUCTS
Aromatic Cedar Plywood
Cedar has a sapwood that is nearly white and its heartwood is purplish to rose-red, matures to dull red or reddish brown. The pattern is straight grainedand fine textured. Cedar is most common in gift ware, furniture and cabinetwork.
12BB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
12BREDB2 B-2 Red Rotary Veneer 4 x 8
12BC2W1 C-2 Even Tone Rotary, Whole Piece Face Veneer 4 x 8
12BD3 D-3 Rotary Veneer 4 x 8
12BSH Shop Rotary Veneer 4 x 8
58BB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8
58BB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
34BA1N A-1 Rotary Veneer 4 x 8
34BA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8
34BA1N1PB A-1 Rotary, Whole Piece Face Particle Board 4 x 8
34BA1NFC A-1 Rotary MDF 4 x 8
34BA1W1PF9 A-1 Select White Rotary, Whole Piece Face 9-Ply Veneer 4 x 8
34BREDA1 A-1 Red Rotary Veneer 4 x 8
34BREDA11 A-1 Red Rotary, Whole Piece Face Veneer 4 x 8
3410BN B-2 Rotary Veneer 4 x 10
3458BB2NFC B-2 Rotary MDF 5 x 8
34BB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
34BB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8
34BB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
34BB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
34BB4NFC
B-4 Rotary MDF 4 x 834BREDB2 B-2 Red Rotary Veneer 4 x 8
34BREDB2FC B-2 Red Rotary MDF 4 x 8
34BREDBB B-B Red Rotary Veneer 4 x 8
34BC3N1 C-3 Rotary, Whole Piece Face Veneer 4 x 8
34BC2W1 C-2 Even Tone Rotary, Whole Piece Face Veneer 4 x 8
58BMSH Shop Rotary Veneer 4 x 8
34BD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8
34BSH Shop Rotary Veneer 4 x 8
1BB2N1 1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
1BD3 1 D-3 Rotary Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
14ARCG1S B-4 Plain Sliced Veneer 4 x 8
34AACEDAR A-A Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
-
8/2/2019 Wood Section
11/28
COLUMBIA FOREST PRODUCTS
Cherry Plywood
A beautiful close grained wood traditionally used in fine furniture. Its heartwood color ranges from light to medium reddish brown. Transparent finishesbring out the incredibly rich luster. This elegant species is one that will darken with age and sunlight.
COLUMBIA FOREST PRODUCTS
Hickory-Pecan Plywood
Hickory-Pecan is moderately heavy and hard. These extremely tough and resilient hardwoods are virtually impossible to tell apart. Its heartwood colorranges from creamy to pinkish brown, with dark streaks. The pattern is straight and close-grained.
Ref# Thickness Grade Cut Core Size
14CHA1PSPBC A-1 Plain Sliced Particle Board 4 x 8
14CHA2PSPBC A-2 Plain Sliced Particle Board 4 x 8
14CHB1PSFC B-1 Plain Sliced MDF 4 x 8
14CHB2PSFC B-2 Plain Sliced MDF 4 x 8
14CHG1S B-2 Plain Sliced Veneer 4 x 8
14CHB2PSFCBEAD B-2 Plain Sliced, Beaded MDF 4 x 8
14CHG2S B-4 Plain Sliced Veneer 4 x 8
12CHB2PS B-2 Plain Sliced Veneer 4 x 8
12CHB2PSFC B-2 Plain Sliced MDF 4 x 8
1210CHB2PSFC B-2 Plain Sliced face with Rotary Cutback
MDF 4 x 10
34CHA1PS A-1 Plain Sliced Veneer 4 x 8
34CHA1PSFC A-1 Plain Sliced MDF 4 x 8
34CHA1PSFCSMN A-1 Plain Sliced, Sequence Matched &Numbered
MDF 4 x 8
3410CHA1PS A-1 Plain Sliced Veneer 4 x 10
3410CHB1PS B-1 Plain Sliced Veneer 4 x 1034CHB2PSPB B-2 Plain Sliced Particle Board 4 x 8
34CHB2PS B-2 Plain Sliced Veneer 4 x 8
34CHB2PSFC B-2 Plain Sliced MDF 4 x 8
3458CHB2PSFC B-2 Plain Sliced MDF 5 x 8
34CHSH Shop Rotary Veneer 4 x 8
1CHB1PS 1 B-1 Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
14HB2PS B-2 Plain Sliced Veneer 4 x 8
14HB2PSFC B-2 Plain Sliced MDF 4 x 8
14HG1S B-4 Plain Sliced Veneer 4 x 8
34HA1PS A-1 Plain Sliced Veneer 4 x 8
-
8/2/2019 Wood Section
12/28
COLUMBIA FOREST PRODUCTS
Mahogany Plywood
Mahogany has a firm open grain, rich warm appearance with excellent stability and decay resistance. Colors vary from light red to yellowish tan to a richgolden brown to dark red.
COLUMBIA FOREST PRODUCTS
Maple Plywood
Pleasing, tight grained pattern suitable as both a stain and paint grade panel. Often used in combination with birch in cabinets and other fixtures. Colorranges from near white to reddish brown.
Ref# Thickness Grade Cut Core Size
Genuine Mahogany
14HMG1S B-4 Plain Sliced Veneer 4 x 8
12HMB2PS B-2 Plain Sliced Veneer 4 x 8
34HMA1PS A-1 Plain Sliced Veneer 4 x 8
34HMA1PSFC A-1 Plain Sliced MDF 4 x 8
34HMA1PSFCSMN A-1 Plain Sliced, SequenceMatched & Numbered
MDF 4 x 8
34HMSH Shop Rotary Veneer 4 x 8
Sapele Mahogany
34SAPA1QTR A-1 Quarter Sawn Veneer 4 x 8
Khaya Mahogany
14KHG1S B-4 Plain Sliced Veneer 4 x 8
12KHB2PS B-2 Plain Sliced Veneer 4 x 8
34KHA1PS A-1 Plain Sliced Veneer 4 x 8
34KHA1PSFC A-1 Plain Sliced MDF 4 x 8
Ref# Thickness Grade Cut Core Size
14MA1W1PBC A-1 Select White Rotary, Whole Piece Face ParticleBoard 4 x 8
14MB1W1FC B-1 Uniform White Rotary, Whole Piece Face MDF 4 x 8
14MUWB2BEAD B-2 Uniform White Rotary, Beaded 1 O.C. Veneer 4 x 8
14MB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
14MUWG2SFC B-2 Uniform White Rotary MDF 4 x 8
14MB2W1FCBEAD B-2 Uniform White Rotary, Whole Piece Face, Beaded MDF 4 x 8
14MB2WPSFC B-2 Uniform White Plain Sliced MDF 4 x 8
14MUWG2S
B-2 Uniform White Rotary Veneer 4 x 814MUWG1SBEAD B-4 Uniform White Rotary, Beaded 1 O.C. Veneer 4 x 8
14BEADMAP B-4 Uniform White Rotary, Beaded MDF 4 x 8
14MB4W1 B-4 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
14MB4WPS B-4 Uniform White Plain Sliced Veneer 4 x 8
14MNG1S B-4 Rotary Veneer 4 x 8
14MUWG1S B-4 Uniform White Rotary Veneer 4 x 8
12MB2N B-2 Spliced Face Veneer 4 x 8
12MB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
12MB2W B-2 Uniform White Rotary Veneer 4 x 8
-
8/2/2019 Wood Section
13/28
12MB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
12MB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
12MB2WFC B-2 Uniform White Rotary Spliced MDF 4 x 8
1210MB2WFC B-2 Uniform White Rotary MDF 4 x 10
12MD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8
34MA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8
34MA1NFC A-1 Spliced Face MDF 4 x 8
34MA1PSW A-1 Select White Plain Sliced Veneer 4 x 8
3410MA1WFC A-1 Select White Plain Sliced MDF 4 x 10
3410MA1WPS A-1 Select White Plain Sliced Veneer 4 x 10
34MA1N1PB A-1 Rotary, Whole Piece Face ParticleBoard
4 x 8
34MA1PSWFC A-1 Select White Plain Sliced MDF 4 x 8
34MA1WPSFCSMN A-1 Select White Plain Sliced, Sequence Matched &Numbered
MDF 4 x 8
34MA1WPSPB A-1 Select White Plain Sliced ParticleBoard
4 x 8
34MUWA4PSPB A-4 Select White Plain Sliced ParticleBoard
4 x 8
34MB1WPS B-1 Uniform White Plain Sliced Veneer 4 x 8
3410MB2WFC B-2 Uniform White Spliced Face MDF 4 x 10
34MB2WFC B-2 Uniform White Spliced Face MDF 4 x 8
34410MB2WPSPB B-2 Uniform White Plain Sliced ParticleBoard
4 x 10
3458MB2WFC B-2 Uniform White Plain Sliced MDF 5 x 8
34MB2N B-2 Spliced Face Veneer 4 x 8
34MB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8
34MB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8
34MB2W B-2 Uniform White Spliced Face Veneer 4 x 8
34MB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8
34MB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8
34MD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8
34MSH Shop Rotary Veneer 4 x 8
1MA1N1 1 A-1 Uniform White Rotary, Whole Piece Face MDF 4 x 8
118MB2W1FC 1 B-2 Uniform White Rotary, Whole Piece face MDF 4 x 8
Ref# Thickness Grade Cut Core Size
COLUMBIA FOREST PRODUCTS
-
8/2/2019 Wood Section
14/28
COLUMBIA FOREST PRODUCTS
Red Oak Plywood
With its open and abundant heartwood, red oak varies from reddish tan to brown. Its consistent coloration from panel to panel makes a good choice for awide variety of furniture, cabinets and fixtures.
Ref# Thickness Grade Cut Core Size
14ROA11 A-1 Rotary, Whole Piece Face Veneer 4 x 814ROA11PBC A-1 Rotary, Whole Piece Face Particle Board 4 x 8
3410ROA1PSFC A-1 Plain Sliced MDF 4 x 10
3410ROA2PS A-2 Plain Sliced Veneer 4 x 10
34ROA1 A-1 Rotary Spliced Veneer 4 x 8
34ROA11 A-1 Rotary, Whole Piece Face Veneer 4 x 8
34ROA1PS A-1 Plain sliced MDF 4 x 8
34ROA1PSFCSMN A-1 Plain Sliced, Sequence Matched & Numbered MDF 4 x 8
34ROAAPSPSFC A-A Plain Sliced MDF 4 x 8
34ROA1PSFC A-1 Plain Sliced MDF 4 x 8
1ROA1 1 A-1 Rotary Spliced Veneer 4 x 8
1ROAAPSPS 1 A-A Plain Sliced Veneer 4 x 8
14BEADRO B-4 Rotary, Beaded MDF 4 x 8
14ROB1PSFC B-1 Plain Sliced MDF 4 x 8
14ROPS B-4 Plain Sliced Veneer 4 x 8
14ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8
14ROB21FCBEAD B-2 Rotary, Whole Piece Face, Beaded MDF 4 x 8
14ROB2BEAD B-2 Rotary, Beaded Veneer 4 x 8
14ROG1S B-4 Spliced Face Veneer 4 x 8
14ROG2S B-2 Spliced Face Veneer 4 x 8
14ROG1SBEAD B-4 Rotary, Beaded Veneer 4 x 8
14ROG2SFC B-2 Spliced Face MDF 4 x 8
1210ROB2FC B-2 Spliced Face MDF 4 x 10
12ROB2 B-2 Spliced Face Veneer 4 x 812ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8
12ROB2FC B-2 Spliced Face MDF 4 x 8
58ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8
58ROB21FC B-2 Rotary, Whole Piece Face MDF 4 x 8
34ROBBWPF2STS B-B Rotary, Whole Piece Face Veneer 4 x 8
3458ROB2FC B-2 Rotary Spliced MDF 5 x 8
34ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8
34ROB21FC B-2 Rotary, Whole Piece Face MDF 4 x 8
34ROB2PSPB B-2 Plain Sliced Particle Board 4 x 8
34ROB2PSPBC B-2 Plain Sliced Particle Board 4 x 8
12ROSH Shop Rotary Veneer 4 x 8
34ROSH Shop Rotary Veneer 4 x 8
34ROD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8
1ROSH 1 Shop Rotary Veneer 4 x 8
COLUMBIA FOREST PRODUCTS
-
8/2/2019 Wood Section
15/28
COLUMBIA FOREST PRODUCTS
White Oak Plywood
White Oak has an open grain. Its hardness and strength making it a perennial favorite for furniture and fixtures. Varies considerably in color from lightgrayish tan to brown.
COLUMBIA FOREST PRODUCTS
Knotty Pine Plywood
Knotty Pine plywood captures the appearance of pine timber whose rustic charm adds beauty. Veneers have yellowish brown color streaks and/or spots.It also has small conspicuous burls and pin knots.
COLUMBIA FOREST PRODUCTS
Walnut Plywood
Walnut, a much sought after hardwood, has many interesting variations in its grain pattern that add to its distinctive nature. These become even morepronounced depending on how it is cut. Its heartwood varies from gray-brown to dark purplish-brown. It is mainly used in upscale homes and furniture.
Ref# Thickness Grade Cut Core Size
14WOG1S B-4 Plain Sliced Veneer 4 x 8
34WOA1PS A-1 Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
14KPB2PSFC B-2 Plain Sliced MDF 4 x 8
14KPG1S B-4 Plain Sliced Veneer 4 x 8
14KPG2S B-2 Plain Sliced Veneer 4 x 8
12KPB2KBFC B-2 Rotary, Tropical Back MDF 4 x 8
12KPB2PS B-2 Plain Sliced Veneer 4 x 8
34KPA1PS A-1 Plain Sliced Veneer 4 x 8
34KPB2KB B-2 Plain Sliced, Tropical Back Veneer 4 x 8
34KPB2KBFC B-2 Rotary, Tropical Back MDF 4 x 8
34KPB2PS B-2 Plain Sliced Veneer 4 x 8
34KPSH Shop Plain Sliced Veneer 4 x 8
Ref# Thickness Grade Cut Core Size
14WPSG1S B-4 Plain Sliced Veneer 4 x 8
3484WA1PS A-1 Plain Sliced Veneer 8 x 4 cross-grain
34WA1PS A-1 Plain Sliced Veneer 4 x 8
34WA1PSFC A-1 Plain Sliced MDF 4 x 8
34WA1PSFCSMN A-1 Plain Sliced, Sequence Matched MDF 4 x 8
COLUMBIA FOREST PRODUCTS
-
8/2/2019 Wood Section
16/28
COLUMBIA FOREST PRODUCTS
Prefinished PlywoodUV Prefinished
We have the prefinished hardwood plywood for any job. Well finish one or both sides to your specifications and before you even start, your work is par tiallydone.
By using UV finished plywood you can eliminate exposure to harmful VOC emissions. Choose from any combination of species, grade and core availablefor special order. Or select from our stock list below for prompt delivery.
Our UV plywood is perfect for use in cabinets, vanities, casegoods, end panels, shelving, drawer parts and any place a clean, durable clear finish isrequired.
Lowers sanding and finishing cost Improves productivity Quality - upgrade to a real wood interior Environmentally responsible
Ref# Thickness Grade Cut Core Size Prefinished
Birch
14BG1SUV1 B-4 Rotary Veneer 4 x 8 1 Side
12BB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
12BB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
12BSHUV2 Shop Rotary Veneer 4 x 8 2 Sides
58BSHUV2 Shop Rotary veneer 4 x 8 2 Sides
34BB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
34BB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
34BC3NUV1 C-3 Rotary Veneer 4 x 8 1 Side34BD31UV1 D-3 Rotary, Whole Piece Face Veneer 4 x 8 1 Side, Back
34BD31UV2 D-3 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
34BSHUV1 Shop Rotary Veneer 4 x 8 1 Side
34BSHUV2 Shop Rotary Veneer 4 x 8 2 Sides
1BB2N1UV2 1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
Cherry
14CHA4PSUV1 A-4 Plain Sliced Veneer 4 x 8 1 Side
34CHA1PSUV2 A-1 Plain Sliced Veneer 4 x 8 2 Sides
34CHB2PBCUV1B B-2 Plain Sliced Particle Board 4 x 8 1 Side, Back
Maple
14MB4N1UV1 B-4 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
14MB4NUV1 B-4 Rotary Veneer 4 x 8 1 Side
14MC4NUV1 C-4 Rotary Veneer 4 x 8 1 Side
12MB2NUV2 B-2 Rotary Veneer 4 x 8 2 Sides
12MB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side12MC2NUV1 C-2 Rotary Veneer 4 x 8 1 Side, Face
12MD2NUV2 D-2 Rotary Veneer 4 x 8 2 Sides
58MC2NUV1 C-2 Rotary Veneer 4 x 8 1 Side
58MC2NUV2 C-2 Rotary Veneer 4 x 8 2 Sides
58MC3NUV1 C-3 Rotary Veneer 4 x 8 1 Side
34MB2N1PBCUV1B B-2 Rotary, Whole Piece Face Particle Board 4 x 8 1 Side, Back
34MB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
34MB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
34MB2NPBCUV2 B-2 Rotary Particle Board 4 x 8 2 Sides
Ref# Thickness Grade Cut Core Size Prefinished
-
8/2/2019 Wood Section
17/28
Import Plywood
Imported from China, domestic veneer species are presented on veneer core panels. Available in a variety of thicknesses, grades, and cuts, all panels are4x8.
34MB2NUV1 B-2 Rotary Veneer 4 x 8 1 Side
34MB2NUV2 B-2 Rotary Veneer 4 x 8 2 Sides
34MC2NUV1 C-2 Rotary Veneer 4 x 8 1 Side
34MC2NUV2 C-2 Rotary Veneer 4 x 8 2 Sides
34MD2N1UV1 D-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
34MD2N1UV2 D-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides34MD3N1UV1 D-3 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
34MB2W1UV2 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
Poplar
14POPUV1 BB-CC Rotary Veneer 4 x 8 1 Side
12POPUV2 BB-CC Rotary Veneer 4 x 8 2 Sides
34POPUV2 BB-CC Rotary Veneer 4 x 8 2 Sides
Red Oak14ROG1SUV1 B-4 Rotary Veneer 4 x 8 1 Side
12ROB21UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
12ROB2UV2 B-2 Rotary Veneer 4 x 8 2 Side
34ROB21FCUV2 B-2 Rotary, Whole Piece Face MDF 4 x 8 2 Sides
34ROB21UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side
34ROB21UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides
34ROB2PBUV1 B-2 Rotary Particle Board 4 x 8 1 Side, Back
34ROSHUV1 Shop Rotary Veneer 4 x 8 1 Side
34ROSHUV2 Shop Rotary Veneer 4 x 8 2 Sides
Ref# Species Thickness Grade Description
14BIRIMP Birch 5.2mm good 1 side Plain Sliced
12BIRIMP Birch 12mm C-2 Rotary Cut
12BIRIMPC3UV2 Birch 12mm C-3 Prefinished 2Sides
12WBIRIMP White Birch 12mm C-D Rotary Cut WPF
34BIRIMP Birch 18mm C-2 Rotary Cut
34BIRSP Birch 18mm C-3 Rotary Cut
34BIRIMPC2W White Birch 18mm C-2 Rotary Cut
34BIRIMPC3UV2 Birch 18mm C-3 Prefinished 2
Sides
34WBIRIMP White Birch 18mm C-D Rotary Cut WPF
14CHIMP Cherry 5.2mm good 1 side Plain Sliced
34CHA2IMP Cherry 18mm A-2 Plain Sliced
14MAPIMP Maple 5.2mm good 1 side Plain Sliced
14POP Poplar 5.2mm DBB-CC Rotary Cut
12POP Poplar 12mm DBB-CC Rotary Cut WPF
34POP Poplar 18mm DBB-CC Rotary Cut WPF
14OAKIMP Red Oak 5.2mm good 1 side Plain Sliced
34ROABIMP Red Oak 18mm A-B Plain Sliced
Ref# Thickness Grade Cut Core Size Prefinished
Baltic Birch Plywood
-
8/2/2019 Wood Section
18/28
y
Baltic Birch is a multi-ply panel product made in Russia. It is available in a vast array of thicknesses and grades. Typically white in color, the multi-ply cross-bands have excellent screw-holding properties and provide a decorative edge when left uncovered.
Available in thicknesses ranging from 3mm to 25mm and panel sizes of 5x5 or 4x8, its most commonly used in furniture, casegoods, and cabinetry.
Baltic Birch is imported on GOST standards. We offer the following grades from stock:
Grade B-Select one-piece face veneer is generally light and even in color. Some small, closed, pin knots may be allowed, as well as some brownstreaks. NO patches or voids are allowed. The surface is well sanded.
Grade BB-One-piece face veneer is generally light and uniform in color. Occasional pin knots and mineral streaking is allowed. ALL open knots anddefects other than those allowed in grade B have been cut out and replaced with oval patches. The patch veneer is the same grade and specie, and istypically of the same color. The surface is sanded.
Grade C-This grade allows patches, open knots, and veneer splits. Grade C is not normally sanded.
Virola/Faviera Plywood
Faviera is a utility plywood produced in Latin America. It can be used as a substitute for Lauan/Meranti in most cases.
Faviera is an open grain wood that ranges in color from white to dark brown. Some mills are willing to sort for white wood. Its most commonly used forlamination and component build up.
Ref# Thickness Grade Core Size
185BB 3mm BB-BB Veneer Core 60 x 60
185BBB 3mm B-BB Veneer Core 60 x 60
4M5BB 4mm BB-BB Veneer Core 60 x 60
145BB 6mm BB-BB Veneer Core 60 x 60
145BBB 5.2mm B-BB Veneer Core 60 x 60
3848BB 9mm BB-BB Veneer Core 48 x 96
385BB 9mm BB-BB Veneer Core 60 x 60
385BBB 9mm B-BB Veneer Core 60 x 60
1248BB 12mm BB-BB Veneer Core 48 x 96
125BB 12mm BB-BB Veneer Core 60 x 60
125BBB 12mm B-BB Veneer Core 60 x 60
125CC 12mm C-C Veneer Core 60 x 60585BB 15mm BB-BB Veneer Core 60 x 60
585BBB 15mm B-BB Veneer Core 60 x 60
585CC 15mm C-C Veneer Core 60 x 60
15955BB 15.9mm BB-BB Veneer Core 60 x 60
3448BB 18mm BB-BB Veneer Core 48 x 96
345BB 18mm BB-BB Veneer Core 60 x 60
345BBB 18mm B-BB Veneer Core 60 x 60
Ref# Thickness Grade Core Size
14VIR 5.2mm OVL-BTR Veneer Core 48x96
12VIR 12mm BB-CC Veneer Core 48x96
58VIR 15mm BB-CC Veneer Core 48x96
34VIR 18mm BB-CC Veneer Core 48x96
34VIR4 18mm BB-CC Veneer Core 48x96
34XVIR 18mm PBB-CC Exterior Veneer Core 48x96
34VIRIND 18mm Industrial Veneer Core 48x96
Ivory Virola
14IVORY 5.2mm BB-CC Veneer Core 48x96
12IVORY 12mm BB-CC Veneer Core 48x96
34IVORY 18mm BB-CC Veneer Core 48x96
Feather White Virola
34FW 18mm BB-CC Veneer Core 48x96
Lauan/Meranti Plywood
-
8/2/2019 Wood Section
19/28
y
Lauan/Meranti is a well-known species imported from both Malaysia and Indonesia. Suitable for and abundance of uses its related to Mahogany. Theopen grain can range in color from red to pink to white.
Common uses include lamination, underlayment, furniture parts, and casegoods.
Sande Plywood
Sande is golden white species from Latin America. Primarily used for case goods and paint applications. Sande is imported under IWPA standards.
Fir Plywood
Fir is valued for its strength, light weight and resistance to decay. The AC-Fir has a A grade face and a C grade back. Our marine grade panels arecommonly used in boats or other applications where the wood will be exposed to moisture.
Ref# Thickness Grade Core Size
Lauan/Meranti Plywood
18LAU 2.7mm OVL-BTR Veneer Core 48x96
14LAU 5.2mm OVL-BTR Veneer Core 48x96
14XLAU 5.2mm OVL-BTR Veneer Core 48x96
38LAU 9mm BB-CC Veneer Core 48x96
12LAU 12mm BB-CC Veneer Core 48x96
58LAU 15mm BB-CC Veneer Core 48x96
34LAU 18mm BB-CC Veneer Core 48x96
34LAULC 18mm BB-CC Lumber Core 48x96
Platforms
1116PLATFORM 17.46mm BB-CC Veneer Core 48x96
716PLATFORM 11.11mm BB-CC Veneer Core 48x96
Bending Lauan
14BGLAU 5.2mm 96 Veneer Core 96x48 cross-grain
38BGLAU 9.52mm BB-CC Veneer Core 96x48 cross-grain
38BGLAU48 9.52mm BB-CC Veneer Core 48x96
Ref# Thickness Grade Core Size
14SANDE 5.2mm OVL-BTR Veneer Core 48 X 96
12SANDE 12mm BB-CC Veneer Core 48 X 96
34SANDE 18mm BB-CC Veneer Core 48 X 96
Ref# Thickness Width Length
12MARGF 48 96
34MARGF 48 96
34ACF 48 96
1ACF 1 48 96
UNIBOARD
-
8/2/2019 Wood Section
20/28
Panval Melamine
Whether your designing or manufacturing office furniture, store fixtures, kitchen cabinets or home furnishings, Panval thermofusedmelamine laminates set the industry standard for quality and performance. The Panval Collection offers you a choice of solids,woodgrains, abstracts and metallics to enhance the corporate, retail or home environment. For architects, manufacturers anddesigners alike, the Panval Collection opens up a whole new world of exciting possibilities.
Ref# Thickness (in.) Size Finish
1458251953P 5 x 8 Albany Oak/Captiva Maple
1448888920P 4 x 8 Almond
1248136P 4 x 8 Almond
1258136P 5 x 8 Almond
5848920P 4 x 8 Almond
5858136P 5 x 8 Almond
5859136P
5 x 9 Almond3448136P 4 x 8 Almond
3458136P 5 x 8 Almond
3459136P 5 x 9 Almond
3458810P 5 x 8 Antique White
3459810P 5 x 9 Antique White
1448810992P 4 x 8 Antique White/Hardrock Maple
3458175P 5 x 8 Bavarian Beech
1448175802P 4 x 8 Bavarian Beech/Willow Grey
3458809P 5 x 8 Blizzard
3448003P 4 x 8 Cabinet White
5848168P 4 x 8 Canadian Grey
3448168P 4 x 8 Canadian Grey
3459168P 5 x 10 Canadian Grey
3458168P 5 x 8 Canadian Grey
11859168P 1 5 x 10 Canadian Grey
3458953P 5 x 8 Captiva Maple
3458176P 5 x 8 Caramel Cherry
3458123P 5 x 8 Charcoal
1448123176P 4 x 8 Charcoal/Caramel Cherry
1458123176P 5 x 8 Charcoal/Caramel Cherry
34PVCHPS992PBC 4 x 8 Cherry/Hardrock Maple
3449CHPS992P 4 x 9 Cherry/Hardrock Maple
34PVCHPS555PBC
4 x 8 Cherry/Nova White3458383FFP 5 x 8 English Brown Oak
1458383388FFP 5 x 8 English Brown Oak/Finnish Oak
1448383971P 4 x 8 English Brown Oak/Pear
3458388FFP 5 x 8 Finnish Oak
3458987P 5 x 8 Grey Glace
3458826P 5 x 8 Haze
3448421PPC 4 x 8 Honduras Mahogany
1248992P 4 x 8 Hardrock Maple
1259992P 5 x 9 Hardrock Maple
Ref# Thickness (in.) Size Finish
-
8/2/2019 Wood Section
21/28
5848992P 4 x 8 Hardrock Maple
5859992P 5 x 9 Hardrock Maple
3448992P 4 x 8 Hardrock Maple
3458992P 5 x 8 Hardrock Maple
3459992P 5 x 9 Hardrock Maple
3458992PGBP 5 x 8 Hardrock Maple/Backer1458992555P 5 x 8 Hardrock Maple/Nova White
1448992555P 4 x 8 Hardrock Maple/White
1448M609968P 4 x 8 Imperial Maple
3458968P 5 x 8 Imperial Maple
3458704P 5 x 8 June Mahogany
3458832P 5 x 8 Limoges Pear
1258562P 5 x 8 Manitoba Maple
3458562P 5 x 8 Manitoba Maple
1448562978P 4 x 8 Manitoba Maple/Regal Cherry
3449MAPPS992P 4 x 9 Maple Veneer/Hardrock Maple
3449332555P 4 x 9 Maple/Nova White
3458806P 5 x 8 Marine
34PVBIRNRC555PBC 4 x 8 Natural Birch/Nova White
34PVMAPNRC555PBC 4 x 8 Natural Maple/Nova White
5848946P 4 x 8 Natural Oak
3458946P 5 x 8 Natural Oak
3458920P 5 x 8 New England Almond
1448888P 4 x 8 Nova Black
1248888P 4 x 8 Nova Black
1258888P 5 x 8 Nova Black
5848888P 4 x 8 Nova Black
3448MDFPE888 4 x 8 Nova Black-MDF
3448888P 4 x 8 Nova Black3458888P 5 x 8 Nova Black
3459888P 5 x 9 Nova Black
11859888P 1 5 x 10 Nova Black
1248888PGBP 4 x 8 Nova Black/Greenbay Twill
1448555P 4 x 8 Nova White
3458MDFPE555G1S 5 x 8 Nova White
1258555P 5 x 8 Nova White
1259555P 5 x 9 Nova White
5848555P 4 x 8 Nova White
5858555P 5 x 8 Nova White
5859555P 5 x 9 Nova White
3448555P 4 x 8 Nova White
3458555P 5 x 8 Nova White
3459555P 5 x 9 Nova White
34510555P 5 x 10 Nova White
341289491EBM 12 x 8 Nova White
148555P 1 4 x 8 Nova White
Ref# Thickness (in.) Size Finish
-
8/2/2019 Wood Section
22/28
158555P 1 5 x 8 Nova White
1448555136P 4 x 8 Nova White/Almond
1448555920P 4 x 8 Nova White/Almond
5848555T604P 4 x 8 Nova White/Antique White
5848555PGBP 4 x 8 Nova White/Greenbay Twill
3448555PGBP 4 x 8 Nova White/Greenbay Twill3458555PGBP 5 x 8 Nova White/Greenbay Twill
1248555PGBP 4 x 8 Nova White/Greenbay Twill
1248555P 4 x 8 Nova White
3458971P 5 x 8 Pear
3448765FFP 4 x 8 Port Maple
1448765978FFP 4 x 8 Port Maple/Regal Cherry
1448M610959P 4 x 8 Provencal Maple
3458959P 5 x 8 Provencal Maple
34PVROPS992PBC 4 x 8 Red Oak/Hardrock Maple
34PVROPS555PBC 4 x 8 Red Oak/Nova White
3449330555P 4 x 9 Red Oak/Nova White
3448978FFP 4 x 8 Regal Cherry
3458978P 5 x 8 Regal Cherry
3458978959P 5 x 8 Regal Cherry/Provencal Maple
1448978555P 4 x 8 Regal Cherry/White
3458972FFP 5 x 8 Royal Maple
1458972992FFP 5 x 8 Royal Maple/Hardrock Maple
3459113P 5 x 9 Super White
3458385P 5 x 8 Sapelli Mahogany
1448385826P 4 x 8 Sapelli Mahogany/Haze
1458385826P 5 x 8 Sapelli Mahogany/Haze
3458385808P 5 x 8 Sapelli Mahogany/Provence
5848805P 4 x 8 Sunset Grey3448805P 4 x 8 Sunset Grey
3458805P 5 x 8 Sunset Grey
1448805168P 4 x 8 Sunset Grey/Canadian Grey
1448933TW31P 4 x 8 Sycamore/Texas Walnut
1448C601946P 4 x 8 Virginia Pine/Natural Oak
3448WH39P 4 x 8 White
34PVMAPPS555PBC 4 x 8 White Maple/Nova White
34PVMAPPS992PBC 4 x 8 White Maple/Hardrock Maple
3458802P 5 x 8 Willow Grey
Nevamar Melamine
-
8/2/2019 Wood Section
23/28
MelaFace thermal fused melamine panels from Nevamar are value-engineered to provide durability and cost-efficiency,as well as distinctive design appeal.
The panels are highly resistant to moisture, stain, soiling, scuffing, and scratching. In manufacturing, panels are thermalfused under heat and pressure to permanently bond the super-saturated paper to the substrate. This eliminatesdelamination and provides a highly realistic, natural appearance.
Nevamar melamine panels provide a wide range of cost-efficient designs for furniture, fixture, and cabinet makers.
Ref# Thickness Size Color Substrate
14483341949M 4 x 8 Natural Oak - White Particle Board
14483346M 4 x 8 Natural Oak Particle Board
14484308948M 4 x 8 Hardrock Maple - White Particle Board
1448920M 4 x 8 Almond Particle Board
1448927961M 4 x 8 Folkstone - Fog Particle Board
1448949920M 4 x 8 White - Almond Particle Board
1248909MDF2S 4 x 8 Black MDF1248920M 4 x 8 Almond Particle Board
1248951M 4 x 8 Ultra White Particle Board
5848949M 4 x 8 White Particle Board
5848951M 4 x 8 Ultra White Particle Board
34489090M 4 x 8 Black Particle Board
3448909MDF2S 4 x 8 Black MDF
3448920M 4 x 8 Almond Particle Board
3448949M 4 x 8 White Particle Board
3448949PGBM 4 x 8 White - Glueable backer Particle Board
3448951M 4 x 8 Ultra White Particle Board
3448MDFLW1S 4 x 8 White - Raw Light MDF
3448MDFP949G1S 4 x 8 White - Raw MDF Plus
148951M 1 4 x 8 Premium White Particle Board
148MDF949G1S 1 4 x 8 White - Raw MDF
12589090M 5 x 8 Black Particle Board
1258920M 5 x 8 Almond Particle Board
1258927M 5 x 8 Folkstone Particle Board
1258949M 5 x 8 White Particle Board
1258951M 5 x 8 Ultra White Particle Board
1258961M 5 x 8 Fog Particle Board
58581168M 5 x 8 Galaxy White Particle Board
58589090M 5 x 8 Black Particle Board
5858920M
5 x 8 Almond Particle Board5858927M 5 x 8 Folkstone Particle Board
5858949M 5 x 8 White Particle Board
5858951M 5 x 8 White Particle Board
5858951MG1S 5 x 8 White - Raw Particle Board
5858961M 5 x 8 Fog Particle Board
34581097M 5 x 8 Antique White Particle Board
34583213M 5 x 8 Gunstock Walnut Particle Board
34581083M 5 x 8 California Almond Particle Board
34583341M 5 x 8 Natural Oak Particle Board
34583346M 5 8 N t l O k P ti l B d
Ref# Thickness Size Color Substrate
-
8/2/2019 Wood Section
24/28
Vinyl/Foil Panels
34583346M 5 x 8 Natural Oak Particle Board
34584308M 5 x 8 Hard Rock Maple Particle Board
34589090M 5 x 8 Black Particle Board
3458920M 5 x 8 Almond Particle Board
3458927M 5 x 8 Folkstone Particle Board
3458949M 5 x 8 White Particle Board3458949MR35M 5 x 8 White-Navy Particle Board
3458949PGBM 5 x 8 White - Glueable backer Particle Board
3458951C 5 x 8 Ultra White Particle Board
3458951M 5 x 8 Ultra White Particle Board
3458961M 5 x 8 Fog Particle Board
3458MDFP949G1S 5 x 8 White - Raw MDF Plus
158951M 1 5 x 8 Ultra White Particle Board
158949M 1 5 x 8 White Particle Board
3459951C 5 x 9 Ultra White Particle Board
3459951M 5 x 9 Ultra White Particle Board
118591097M 1 5 x 9 Antique White Particle Board
34510951M 5 x 10 White Particle Board
Ref# Thickness Front Back Core
48 X 96
14AV1SL Almond Raw Lauan
14BV1SMDF Black Raw MDF
14BV2SMDF Black Black MDF
14WV1SHBT White With Low Gloss Raw Fibrex
14WV1SL White With Low Gloss Raw Lauan
14WV1SMDF
White Raw MDF1848FIBREX Fibrex Raw Fibrex Raw Fibrex
1848WP1S White White Fibrex
1448WOF1S Western Oak Western Oak Fibrex
1448WP1S Pure White Pure White Fibrex
1448FOGF1S Fog Fog MDF
1448FIBREX Fibrex Raw Fibrex Raw Fibrex
1448300920F White St. Almond Fibrex
1448602F Hard Rock Maple Raw Fibrex
1448AF1S Almond Almond MDF
1448FOLF1S Folkstone Folkstone MDF
1448H1400F Cabinet Print Fibrex Raw Fibrex
1448BF1S Black Black MDF
1448WF1S White White Fibrex
1248311700G1SMDF Fairfield Maple Raw MDF
12WMOP1 White Raw Plywood
12WMOP2 White White Plywood
34WV1SL White Raw Veneer
34WMOP1IMP White Raw Import
Ref# Thickness Front Back Core
-
8/2/2019 Wood Section
25/28
Particle Board
Particleboard is used as a core material in office furniture, shelving, and kitchen cabinets. The surface is excellent for application of any laminates,veneers or painting. Choose from a large range of thickness and panel sizes.
34WMOP1IMP White Raw Import
34WMOP2 White White Import Plywood Plat-form
5848451MDF Walnut Walnut MDF
60 X 96
1458WV1SMDF White Raw MDF
1858FIBREX Fibrex Raw Fibrex Raw Fibrex
1458602F Hard Rock Maple Raw Fibrex
1458BF1S Black Black Fibrex
1458FIBREX Fibrex Raw Fibrex Raw Fibrex
1458MAPF1S Fashion Maple Fashion Maple Fibrex
1458WP1S Pure White Pure White Fibrex
1458WF1S White White Fibrex
60 X 108
1459WF1S White White MDF
Ref# Thickness Width Length
3848PB 49 97
1248PB 49 97
1258PB 61 97
583010PB 30 121
5848PB 49 97
5858PB 61 97
111648PB 49 97
111658PB 61 97
3448PB 49 97
34410PB 49 1213458PB* 61 109
3459PB* 61 97
34510PB* 61 121
34512PB 61 145
7848PB 49 97
151658PB 61 97
148PB 1 49 97
158PB 1 61 97
1512PB 1 61 145
118512PB 1 61 145
11848PB 1 49 97
11858PB 1 61 97
1316310PB 1 37 121
Cut To Size Particleboard
Our cut sizes of particleboard are designed to help reduce waste The smooth surface makes it highly suitable for all types of laminating Choose from a
-
8/2/2019 Wood Section
26/28
Our cut sizes of particleboard are designed to help reduce waste. The smooth surface makes it highly suitable for all types of laminating. Choose from awide variety of thicknesses and panel sizes.
Medium Density FiberboardMDF
Medium density fiberboard (MDF) is an engineered wood product composed of wood fibers and a synthetic resin joined together under heat and pressureto form large panels. This product features a uniform density for smooth machining and low tool wear.The wide range of sealers, primers, and coatings canbe used on MDF to produce a hard durable surface.
Ref# Thickness Width Length
34258PB 25 97
342510PB 25 121
342512PB
25 14534308PB 30 97
343010PB 30 121
343012PB 30 145
34368PB 36 97
343610PB 36 121
343612PB 36 145
15161128PB 1.5 97
118258PB 1 25 97
1182510PB 1 25 121
1182512PB 1 25 145
118308PB 1 30 97
1183012PB 1 30 145
Particle Board with Craft Paper Back
1182512PBCP 1 25 145
1183012PBCP 1 30 145
Particle Board Backsplash
58378PBBS 3.875 97
Ref# Thickness Width Length
Weyerhaeuser Premier Plus
3848MDFP 49 97
3858MDFP 61 97
38510MDFP 61 121
1248MDFP ' 49 97
12510MDFP 61 121
1258MDFP 61 975848MDFP 49 97
5858MDFP 61 97
58510MDFP 61 121
71658MDFP 61 97
341216MDFP 11.25 193
3448MDFP 49 97
34510MDFP 61 121
34512MDFP 61 145
3458MDFP 61 97
3459MDFP 61 109
Ref# Thickness Width Length
-
8/2/2019 Wood Section
27/28
148MDFP 1 49 97
158MDFP 1 61 97
11848MDFP 1 49 97
11858MDFP 1 61 97
11458MDFP 1
61 9711258MDFP 1 61 97
Premier Lite
3458MDFL 61 97
158MDFL 1 61 97
Premier Ultra Lite
3448MDFL 49 97
34512MDFL 61 145
Thin MDF
1448MDF 49 97
West Fraser Ranger MDF
1248MDFR 49 97
3448MDFR 49 97
Beaded
14MDFBEAD 49 97
14MDFBEADP 49 97
Uniboard Panfiber
1248MDFUL 49 97
3448MDFUL 49
3458MDFUL 61 97
148MDFUL 1 49 97
1448MDFPE 49 97
1458MDFPE 61 97
3848MDFPE 49 97
5848MDFPE 49 97
5858MDFPE 61 97
58510MDFPE 61 121
1248MDFPE 49 97
12410MDFPE 49 121
1258MDFPE 61 97
3448MDFPE 49 97
34410MDFPE 49 121
3458MDFPE 61 97
3459MDFPE 61 109
3410MDFPE 61 121
34512MDFPE 61 145
148MDFPE 1 49 97
158MDFPE 1 61 97
Hardboards
Hardboard is chemically treated to make it very durable and ridged. Used for drawer bottoms and backs of cabinets it can also be made into a pegboard
-
8/2/2019 Wood Section
28/28
when it is perforated with holes.
INTERIOR PRODUCTS
Timberflex
Timberflex is ideal for custom fabrication because it is the first and only high-quality 3/4 bendable panel that has three-plyItalian popular face ready to paint, stain or laminate without the need for patching or sanding. The panels can bend to a 5radius and are perfectly flat without dips, valleys and hard spots often found in bendable plywood.
INTERIOR PRODUCTS
Kerfkore
Choose Kerfkore for doing fast and accurate radius work. Kerfkore is a revolutionary substrate material that allows horizontal orvertical grade laminates, metals, 2-Ply and phenolic backed veneers to be laminated flat and then formed into virtually anyshape without stress cracks, delamination or telegraphing. Kerfkore provides for smooth and symmetrical inside and outside
radii up to 3-1/2 The face paper is a black lates impregnated paper.
INTERIOR PRODUCTS
EconoKore
Its a unique 2-Ply product that brings you the ability to form curves with less labor...and less cost.
Made of processed MDF core with High Density or Poplar overlay, youllfind it much easier and more economical to use than bending ply!
INTERIOR PRODUCTS
Flexboard
Flexboard is a low-cost alternative to bending plywood for radius application. Flexboard provides 10-inch radius fabrication
quickly and easily with no sanding, patching, multiple layers, special installation, or odor. The hardboard surface is ideal forpainting or laminating paper, vinyl, calibrated for uniform thickness throughout the manufacturing process.
Ref# Thickness Size Description
18TEMPHB 48x96 tempered hardboard
14PEGBD
48x96 pegboard14TEMPHB 48x96 tempered hardboard
Ref# Size12TIMBERFLEX in. 8 x 4
34TIMBERFLEX84 in. 8 x 4
Ref# Size
34KERFKORE1S in. Single Side 4 x 8
Ref# Size
38ECONO84 in. 8 x 4 MDF
38ECONOPOP84 in. 8 x 4 Poplar
Ref# Size
34FLEXBOARD84 in. 8 x 4