wood chipper/wood crusher wood crushing machine
3
ZHANGQIU YULONG MACHINE CO., LTD EMAIL: [email protected] M.P:86-15662714581 Website: www.woodpelletmill.net www.yulongjixie.org chipper used in wood pellet making line/biomass wood chipper/wood crusher Wood chipper The complete set of this type of machine contains: machine base, rotor drum, upper and lower feed rollers, electrical motor, fed-in belt conveyer, hydraulic sustem, etc. The machine base is welding of high quality steel plate serving as a support of the whole machine. The process of chipping is fairly straightforward: The feeding system draws wood materials in, and the revolving drum (with fly knives on) cut the woods then chips fly out from the bottom of the machine. The common dimension of final chips is 15-40 mm. The chip size could be controlled via adjusting the counter knife.
-
Upload
yuongjixie -
Category
Retail
-
view
143 -
download
6
Transcript of wood chipper/wood crusher wood crushing machine
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.woodpelletmill.netwww.yulongjixie.org
chipper used in wood pellet making line/biomass wood chipper/wood
crusher
Wood chipperThe complete set of this type of machine contains: machine base, rotor drum, upper andlower feed rollers, electrical motor, fed-in belt conveyer, hydraulic sustem, etc. Themachine base is welding of high quality steel plate serving as a support of the wholemachine.
The process of chipping is fairly straightforward: The feeding system draws wood materialsin, and the revolving drum (with fly knives on) cut the woods then chips fly out from thebottom of the machine. The common dimension of final chips is 15-40 mm. The chip sizecould be controlled via adjusting the counter knife.
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.woodpelletmill.netwww.yulongjixie.org
The drum is mounted at the center of the machine and serves as the feed mechanism. It ispowered by a electrical motor, usually by means of a belt. With a feed and control system,this type of chipper could handle woods efficiently and safely, there will be less downtimeand will get more consistent final chips.
For the advantage of high capacity, reliablility and low maintenance requirements, the drummachine is becoming more and more popular in modern industry.They are our mainproducts which specially designed for round logs, square blocks, wood staff, wood piecesand chipping.Operation easy, maintenance simple, life is long and the noisy is low.Theywould be the best choices for dealing with wood scraps
wood chipper cutting is mainly small trail wood, lumbering remainds( such as branches, twigs, tress etc) and woodworking remainds ( such as slab, plank, logcore, waste veneer etc). It also can be used to chip non-lignin raw material (such as flaxpole, bulrush, bamboo etc).
Technical parameters
Product Characteristics
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.woodpelletmill.netwww.yulongjixie.org
