Test Scenario:Step 1: In [CS03] create/display BOM,

Observe the component raw material 100-210, and extend the WM and storage views for this finished product and component raw material (100-200 & 100-210) in [MM01]. Maintain stock for raw material at storage location level by goods receipt with 501 movement type and maintain stock at bin level by creating transfer requirement, transfer order and transfer order confirmation.[After posting goods at IM level via [MB1C] and movement type 501, a transfer order will be created in background ,go to [LT06] Transfer order creation w.r.t material document, or search for the open transfer requirements for the material and create transfer order, observe [MMBE]\[LS26] for the finished goods and the component raw material.]

To display transfer order by:

[LT24].

STEP I:a) Create control cycle [LPk1],

Enter the destination storage type,If this raw material has to be staged in production supply area storage type 100 then which staging method has to be followed is controlled by staging indicator.

Pick list item: If 1 is selected the this raw material has to be picked to destination storage type 100 against a particular production order.Release order part: If 3 is selected then raw material has to be picked against multiple production orders.Crate Part: Kanban technique. If 2is selected then in which crate part the specified quantity has fallen then that required quantity only has to be replenished into that Kanban.

Enter a storage bin or select Dynamic storage bin :

Save.

b) Go to existing work centre [CR02],

Assign production supply area.

c) Create Production Order [CO01],

Enter the total quantity for production, start and finish dates,

Click component overview button to enter the components or the raw materials, if BOM is created for this material then the components are taken from the BOM structure.

Click operation overview button , this shows ,for the production of the material what operations in what sequence and what time and date this has to be started for timely completion of the finished product.

Observe production schedule profile in Control tab:

This profile controls whether transfer requirements has to be created upon release of the production order.Click release order button and save.STEP II: Material Staging:

a) Material staging [LP10],

Material staging created w.r.t an existing production order.

Requested quantity of 10 PC is entered s the staging material in storage type 100 which is actually the production supply area. Partial quantity may be entered.Click , we get a message in status bar WM staging of materials executed without error and the quantity in the requested quantity field becomes blank.The above step need not be done if transfer requirement is already created.

After staging the material quantity is shown in storage type 100,here WM movement type 319 triggered to stage the stock in destination storage type 100 by creating transfer requirement.

Observe the created transfer requirement in [LB10].

b) Create transfer order to move material from storage type 123 to storage type 100.c) Confirm transfer order.d) Observe [LS26].e) Now, whenever the material is consumed in the production department, enter goods issue,

IM movement type 261,Observe goods issue display:

Now stock decreases at storage location level and production supply area location.f) Enter Production order confirmation [CO11],

Save.g) Enter goods receipt w.r.t production order with IM movement type 101after the production is complete (from factory to store).And post.Observe [MMBE]\[LS26].Here WM movement type 103 is triggered to post stock to 901 storage type.

h) Create transfer order.i) Confirm transfer order.