Wireless Sensor for Binary Measurement
Transcript of Wireless Sensor for Binary Measurement
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 1/6
TOR Version
www.beanair.com
ProcessSensor
Streaming10 KHz
IEEE 802.15.48-
Channel isolateddigital input
Wireless data acquision system— IEEE 802.15.4
8-Channel isolated digital input New Product Radio antenna
diversity
End of Stroke sensor
Object detecon sensor (IR Proximity sensor,.)
Level sensor
Applicaons
Main Features
Wireless data acquision system with
8-Channel isolated digital input
Excellent radio link thanks to the antenna
diversity developed by Beanair®
Radio Range : 300 m to 1000 m (L.O.S)
Ultra-Power Radio Technology IEEE
802.15.4
Current consumpon in sleeping mode : < 45 uA
Number of Input Channels : 8 channels
Streaming mode: 10 KHz sampling frequency on each
channel
M12 Sensor connector with IP67 degree of protecon
Embedded logger : up to 1 000 000 measurements records
(with events dang)
Enrely autonomous system : funcon either on
Lithium-thionyl chloride primary baery or on
Lithium-Ion rechargeable baery
Waterght Aluminium enclosure IP66 (dimensions Lxlxh :
111,5x64x21 mm) - suitable for Harsh Industrial Environment
Ultra-low
Power
Data Logger
1 000 000 dataacquision
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 2/6
2
TOR Version
www.beanair.com
ProcessSensor
Embedded Data Logger up to
1,000,0000 data acquision records
The BeanDevice® TOR integrates an embedded Data Logger, which can be used to log data when a Wireless
Sensor Networks can not be easily deployed on your site. All the data acquision are stored on the
embedded ash and then transmied to the BeanGateway® when a Wireless Sensor Networks is
established. The DataLogger feature is compable with all the data acquision mode available on your
BeanDevice® TOR:
LowDutyCycle Data Acquision
Alarm
Survey
Example: Bole Manufacturing
The BeanDevice® TOR is congured
with its dataLogger feature. A stan-
dalone installaon of the BeanDevice®
TOR will be done (mounted on the
walls), without the necessity for any
connecon to the BeanGateway®.
Proximity sensor interfaced with Bean-
Device® TOR counts every bole and
is recorded on the embedded ash.
When needed a technician working on
the site can send a request for a log
transmission. Then the BeanDevice®
TOR starts sending all its logs . If all the
logs are sucessfully transmied to the
BeanGateway®, the ash memory is
erased and new logs will be recorded .
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 3/6
3
TOR Version
www.beanair.com
ProcessSensor
Remote conguraon and monitoring
*Over -the- Air Conguraon
OTAC*
The BeanScape® applicaon allows the
user to view all the data transmied by
the BeanDevice® TOR
With the OTAC (Over-the-Air
conguraon) feature, the user can
remotely congure the
BeanDevice® TOR
Several data acquision modes are available on the
BeanDevice® TOR:
Low Duty Cycle Data Acquision mode (LDCDA): the data
acquision is immediately transmied by radio. The
transmission frequency can be congured from 1s to 24h.
Alarm Mode : the measured value is transmied by radio
whenever an alarm threshold (xed by the user) is
detected (4 alarm threshold levels High/Low).
Survey Mode : operates like the Alarm mode but the de-
vice sends frequently a beacon frame informing its
current status.
Math Mode : Values such as the mean value, minimum
value, maximum value and standard deviaon are
calculated on sample me series and transmied by
radio .
TOR
xxxxxx
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 4/6
4
TOR Version
www.beanair.com
ProcessSensor
RF Specicaons
Wireless Protocol Stack IEEE 802.15.4 (2006 version)
WSN Topology Point-to-Point / Star
Encrypon AES 128 bits (AES integrated coprocessor)
Data rate 250 Kbits/s
RF Characteriscs ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by Beanair®
TX Power +0 dBm to +18 dBm
Receiver Sensivity -95,5 dBm to -104 dBm
Max. Radio Range 1km (L.O.S)
Antenna Antenna diversity : 2 omnidireconal antenna with a gain of 2,2 dBi
Over-the-air conguraon (OTAC) parameters
Data Acquision mode
Low Duty Cycle Data Acquision (LDCDA) Mode: 1s to 24 hour
Alarm mode: the measured value is transmied by radio whenever an alarm threshold (xed
by the user) is detected (4 alarm threshold levels High/Low).
Streaming Packet Mode: all measured values are transmied (90 samples in a frame) within a
connuous ow
Sample Rate(SPS = sample per second)
Minimum: 1 SPS
Maximum: 10 kSPS maximum (on each channel )
Alarm Threshold 2 high levels alarms & 2 low levels alarms
Power Mode System on « Idle » or « Acve »
TX Power -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm
Product Reference
BND-TOR-IEEE
Specicaons Data acquision system specicaon
Signal Condionning 8 isolated digital inputs
AON Input Channels 5-24 Volts
Streaming measurement
mode
10 KHz Maximum on each channel
Sensor Connector M12-5Pins, degree of protecon IP67
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 5/6
5
TOR Version
www.beanair.com
ProcessSensor
Others specicaons
Embedded logger
Storage Capacity : up to 1 000 000 measurements
Integrated real me clock
Write/read Cycle: 400 000
Real Time Clock
Extremely Accurate Real Time Clock:
Accuracy ±2ppm from 0°C to +40°C
Accuracy ±3.5ppm from -40°C to +85°C
Integrated baery charger
Integrated Lithium-ion baery charger with high precision baery monitoring :
Overvoltage Protecon, Overcurrent/Short-Circuit Protecon, Undervoltage Protecon
Baery Temperature monioring
Current accumulaon measurement
Current consumpon
During data acquision : 20 to 30 mA
During Radio transmission : 40 mA @ 0dBm , 70 mA @ 18 dBm
During Idle : < 45 uA
Operang Temperature Industrial temperature : -40 °C to +85 °C
Enclosure
Aluminium & Waterght (IP66) enclosure
Dimensions in mm (LxWxH): 80x55x21 mm, Weight (baery included) : 135g
Shocks resistance 60g during 50 ms
Norms CE Labelling Direcve R&TTE (Radio) ETSI EN 300 328
ROHS - Direcve 2002/95/EC
External power supply External power supply : +8v to +28v
Rechargeable baery High density Lithium-Ion rechargeable baery capacity of 1.3 Ah (referenced as BAT1.3DMG)
Power-supply bloc (Opon) Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67)
Mechanical mounng
(Opon) Screw mounng
Product specicaons are subject to change without noce. Contact Beanair for latest specicaons.
8/6/2019 Wireless Sensor for Binary Measurement
http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 6/6
6
TOR Version
www.beanair.com
ProcessSensor
Descripon StarterKit Reference
Starterkit Wireless Light & Temperature Sensors
1 x BeanGateway Ethernet (Indoor version), Ref.: BGTW -ETH -IND 1 x BeanDevice TOR, Ref: BND-TOR-IEEE
1 x Beanscape Lite , Ref: BNSC_LITE
SK_BND_TOR_IND
Starterkit Wireless Light & Temperature Sensors
1 x BeanGateway Ethernet (Outdoor version), Ref.: BGTW -ETH -OUT 1 x BeanDevice TOR, Ref: BND-TOR-IEEE
1 x Beanscape Lite, Ref: BNSC_LITE
SK_BND_TOR_OUT
Starterkit Wireless Light & Temperature Sensors with hybrid IEEE 802.15.4 & GSM/GPRS Network
1 x BeanGateway Ethernet/GSM/GPRS (Indoor version), Ref: BGTW -GPRS-IND 1 x BeanDevice TOR, Ref: BND-TOR-IEEE
1 x OneSense - WebServer supervision sofware SK_BND_TOR_ONESENSE_IND
Starterkit Wireless Light & Temperature Sensors with hybrid IEEE 802.15.4 & GSM/GPRS Network
1 x BeanGateway Ethernet/GSM/GPRS (Oudoor version), Ref: BGTW -GPRS-OUT 1 x BeanDevice TOR, Ref: BND-TOR-IEEE
1 x OneSense - WebServer supervision sofware SK_BND_TOR_ONESENSE_OUT
Indoor Version
TOR
OR
Geng started with a Wireless Sensor Networks
Outdoor Version
WSN Supervision Soware
OR
OneSense® Lite Webserver
by
The BeanDevice® TOR operates only on our Wireless Sensor Networks , you will need the BeanGateway® and the BeanScape®
for starng a wireless sensor Networks .