Winter Wonderland - Lammily€¦ · Winter Wonderland This winter, Lammily will have a blast...

patterns

WinterWonderlandThis winter, Lammily will

have a blast wearing this

amazing assemble! She

can’t wait to go skiing,

sledding, or just playing in the

snow! Enjoy this simple pattern

with step-by-step instructions.

SIZE: This pattern is custom designed to fit

Lammily dolls.

NOTE: good grasp on sewing, experience with patterns and

sewing terms are needed to complete this design.

This pattern is copyright © Lammily LLC. All Rights Reserved. Copying and/or distributing this pattern is strictly prohibited.

Winter Wonderland patterns designed by Chelly Wood

INTERMEDIATE

Download complete set at www.lammily.com

FREE SAMPLE


Print out pattern pieces on 8.5” X 11” (letter size) paper. Make sure to print at actual size (100%). Check the 1” reference lines on the pattern pages against a ruler, to ensure you have printed them out at the proper scale.

Separate the pattern pieces, cutting them out on the solid perimeter lines. Patterns that are larger than letter size paper will be printed on multiple pages and need to be assembled.Line up segmented pieces and tape them together.

Lay out pieces on fabric, making sure to line up the pattern pieces parallel to the grainline (arrow on pattern pieces). Pin down pieces and cut them out of fabric.

2

View C

View D

Ski Boots Pattern


3

1/8” seam allowance

1/8” seam allow

ance

SKI BOOTWRAP-AROUND PIECE

C & DCut 2 of Felt

SKIBOOT

SOLEC & D

Cut 2

1̋

1̋

1/8” seam allowance

SKI BOOTINNER-LEG

PIECE

C & D

Cut 2 of Felt

Ski Boots Instructions

1. Print and cut out Ski Boots Pattern

2. Cut out the pieces as shown, using felt.

3. Place inner-leg pieces on top of ski boot

wrap-around pieces.

4. Sew from the top of the boot to the toe,

where the inner boot and wrap-around

pieces meet at the front of the boot.

5. Press the seam open.

6. Use a washable fabric marker

to mark the tip of the boot’s

sole, where the arrow is

pointing.

7. Begin sewing the sole to the

upper portion of the boot at the

point where you’ve marked. Match the seam

in the upper boot with the marked point at

the tip of the sole.

Here is the

same boot,

looking from

the top:

Attach the

wrap-around

section FIRST

(sew from A

to C). Then,

sew the

shorter

portion (from

A to B).


4

SKIBOOT

SOLEC & D

Cut 2

9. Stitch three snaps along the edge of the felt

for a primary closure.

We’ll be using

double-folded

1/4˝ (6 mm)

bias tape for

boot’s straps. I

used royal

blue, but any

color will work.

10. Cut six strips of

double-folded bias tape,

3˝ (7.5 cm) long each.

11. Pin the

bias tape to both sides of

the boot first to make sure

you’ve positined it correctly.

12. Use a whip stitch to attach the boot strap

(bias tape) to the side of the boot that

doesn’t have snaps.


Keep stitching the inner-leg piece to the sole,

even after it starts to overlap the

wrap-around piece.

Now you

should have

two boots

that look like

this:

8. Use a

chopstick or

bamboo

knitting

needle to

invert the

boots.

Now the

wrap-around

piece will appear to wrap towards the front:

Ski Boots Instructions continued

5

When it’s all

snapped up, the

boot looks like this!

13. Attach three

strips of bias

tape to each

boot using

the

whipstitch.

14. Attach very

small snaps

(size 4/0) to

the bias tape

and its corre-

sponding

position on

the boot’s

wrap-around

flap.

Ski Boots Instructions continued

6This pattern is copyright © Lammily LLC. All Rights Reserved. Copying and/or distributing this pattern is strictly prohibited.

Winter Wonderland - Lammily€¦ · Winter Wonderland This winter, Lammily will have a blast...

Documents

Transcript of Winter Wonderland - Lammily€¦ · Winter Wonderland This winter, Lammily will have a blast...