1 out of 1 points

A period of planning and design is unnecessary before you start implementation of a file server deployment.Answer

Selected Answer:  False

Correct Answer:  False

Question 2

1 out of 1 points

If your organization has branch offices scattered around the world and uses relatively expensive wide area networking (WAN) links to connect them, it would probably be more economical to install a file server at each location rather than having all of your users access a single file server using the WAN links.Answer

Selected Answer:  True

Correct Answer:  True

Question 3

0 out of 1 points

When preparing a hard disk for use, Windows Server 2008 file servers can use the same settings as workstations.Answer

Selected Answer:  True

Correct Answer:  False

Question 4

1 out of 1 points

When you install additional hard disk drives on a file server, the Windows Server 2008 setup program automatically performs all of the preparation tasks.Answer

Selected Answer:  False

Correct Answer:  False

Question 5

0 out of 1 points

You can mark an existing dynamic disk as an active partition.Answer

Selected Answer:  True

Correct Answer:  False

Question 6

1 out of 1 points

The File Services role and other storage-related features included with Windows Server 2008 provide tools that enable system administrators to address many problems on a scale appropriate to a large enterprise network. However, before you implement the role or begin using these tools, what should you spend some time thinking about?Answer

Selected Answer: your users’ needs and how these needs affect their file storage and

sharing practices

Correct Answer: your users’ needs and how these needs affect their file storage and

sharing practices

Question 7

1 out of 1 points

Within each site, the number of file servers you need can depend on __________.Answer

Selected Answer:all of the above

Correct Answer:all of the above

Question 8

0 out of 1 points

The process of deploying and configuring a simple file server using Windows Server 2008 includes many of the most basic server administration tasks, including all of the following except __________.Answer

Selected Answer:installing disks

Correct Answer:partitioning drives

Question 9

1 out of 1 points

Most personal computers use basic disks because they are the easiest to manage. A basic disk uses what type of partitions and drives?Answer

Selected Answer:primary partitions, extended partitions, and logical disks

Correct Answer:primary partitions, extended partitions, and logical disks

Question 10

0 out of 1 points

The system partition contains what types of files?Answer

Selected Answer:operating system configuration files

Correct Answer:hardware-related files that the computer uses to boot

Question 11

1 out of 1 points

When you work with basic disks in Windows Server 2008, how many primary partitions can you create?Answer

Selected Answer:4

Correct Answer:4

Question 12

1 out of 1 points

How many active partitions can you have per hard drive?Answer

Selected Answer:1

Correct Answer:1

Question 13

1 out of 1 points

What volume type is essentially a method for combining the space from multiple dynamic disks into a single large volume?Answer

Selected Answer:spanned

Correct Answer:spanned

Question 14

0 out of 1 points

What volume type consists of space on three or more physical disks, all of which must be dynamic disks?Answer

Selected Answer:spanned

Correct Answer:RAID-5

Question 15

1 out of 1 points

Windows Server 2008 can support dynamic volumes as large as __________ terabytes.Answer

Selected Answer:64

Correct Answer:64

Question 16

1 out of 1 points

What tool can you use to perform disk-related tasks such as initializing disks, selecting a partition style, converting basic disks to dynamic disks, and more?Answer

Selected Answer:Disk Management MMC snap-in

Correct Answer:Disk Management MMC snap-in

Question 17

1 out of 1 points

What is the first step in designing a file-sharing strategy?Answer

Selected Answer: projecting anticipated storage needs and procuring the correct server

hardware and disk arrays to meet your needs

Correct Answer: projecting anticipated storage needs and procuring the correct server

hardware and disk arrays to meet your needs

Question 18

1 out of 1 points

What file system provides the most granular user access control and also provides other advanced storage features, including file encryption and compression?Answer

Selected Answer:NTFS

Correct Answer:

NTFS

Question 19

0 out of 1 points

Windows Server 2008 has several sets of permissions that operate independently of each other. Which permissions control access to folders over a network?Answer

Selected Answer:NTFS permissions

Correct Answer:share permissions

Question 20

1 out of 1 points

For network users to be able to access a shared folder on an NTFS drive, you must grant them __________ permissions.Answer

Selected Answer:both A & B

Correct Answer:both A & B

Question 21

0 out of 1 points

By default, what topology do replication groups use?Answer

Selected Answer:hub/spoke

Correct Answer:full mesh

Question 22

1 out of 1 points

The Distributed File System (DFS) implemented in the Windows Server 2008 File Services role includes two technologies: DFS Namespaces and __________.Answer

Selected Answer:DFS Replication

Correct Answer:DFS Replication

Question 23

0 out of 1 points

Regardless of the size of your network, your strategy for creating shared folders should consist of all the following information except what __________.Answer

Selected Answer:

folders you will share

Correct Answer:online file settings you will use for the shares

Question 24

1 out of 1 points

What server is responsible for maintaining the list of DFS shared folders and responding to user requests for those folders?Answer

Selected Answer:namespace server

Correct Answer:namespace server

Question 25

1 out of 1 points

Generally speaking, a well-designed sharing strategy provides each user with all of the following resources except __________ storage space.Answer

Selected Answer:

virtual

Correct Answer:virtual

Question 26

10 out of 10 points

Match the description with the terminology.Answer

QuestionCorrect Match

Selected Match

The __________ partition tells the computer which system partition and operating system it should use to start Windows.

G.active

 G.active

The alternative to using a basic disk is to convert it to a(n) __________ disk.

J.dynamic

 J.dynamic

On most enterprise networks, the principle of least __________ should apply when assigning permissions.

B.privilege

 B.privilege

Assigning permissions to __________ enables you to add new users or move them to other job assignments without modifying the permissions themselves.

E.groups

 E.groups

     To create multiple shares and exercise more granular control over their properties, you can use the __________ Folders snap-in.

F.Shared

 F.Shared

     __________ are privileges granted to specific system entities, such as users, groups, or computers, enabling them to perform a task or access a resource.

A.Permissions

 A.Permissions

By default, the __________ special identity receives the Allow Read share permission to any new shared folders you create.

C.Everyone

 C.Everyone

The __________ service enables the computer to share files with network users and is installed on all Windows Server 2008 computers by default.

D.Server

 D.Server

At its simplest, DFS is a virtual __________ technology that enables you to create a single directory tree that contains references to shared folders located on various file servers, all over the network.

I.namespace

 I.namespace

Multiple master __________ is a technique in which H.  H.

duplicate copies of a file are all updated on a regular basis, no matter which copy changes.

replication replication

Question 27

10 out of 10 points

Match the description with terminology.Answer

Question Correct Match Selected Match

What partition tells the computer which system partition and operating system it should use to start Windows?

C.

active partition

 C.

active partition

In what type of disk configuration does the system perform all read and write operations on both disks simultaneously so that they contain duplicate copies of all data stored on the volume?

G.

mirrored volume

 G.

mirrored volume

What principle states that users should have only the privileges they need to perform their required tasks and no more?

H.

principle of least privilege

 H.

principle of least privilege

What permissions control access to the files and folders stored on disk volumes formatted with the NTFS file system?

F.

NTFS permissions

 F.

NTFS permissions

What is a technique in which duplicate copies of a file are all updated on a regular basis no matter which copy changes?

A.

multiple master replication

 A.

multiple master replication

What is the name of the protocol included with DFS that conserves network bandwidth by detecting changes in files and transmitting only the modified data to the destination?

E.

remote differential compression

 E.

remote differential compression

What is the ability of DFS clients to revert to targets that were previously unavailable when they become available again and are of lower cost than the target the client is using?

B.

client failback

 B.

client failback

What is a collection of servers, known as members, each of which contains a target for a

D.  D.

particular DFS folder?replication group

replication group

CHAPTER 7: CONFIGURING A PRINT SERVICE

Question 1

1 out of 1 points

Although any Windows computer can function as a print server, it is not recommended that you use a workstation for this task.Answer

Selected Answer:  False

Correct Answer:  False

Question 2

1 out of 1 points

To stop a job that is currently printing, you must clear the print device’s memory (by resetting it or power-cycling the unit), as well as clear the job from the queue.Answer

Selected Answer:  True

Correct Answer:  True

Question 3

1 out of 1 points

A single computer can perform all of the roles in the Windows print architecture.Answer

Selected Answer:  False

Correct Answer:  False

Question 4

1 out of 1 points

To install the Internet Printing role service, you must also install the Web Server (IIS) role.

Answer

Selected Answer:  True

Correct Answer:  True

Question 5

1 out of 1 points

You must manually install the Print Management console when you add the Print Services role to the computer.Answer

Selected Answer:  False

Correct Answer:  False

Question 6

1 out of 1 points

Printing in Microsoft Windows typically involves all of the following components except a __________.Answer

Selected Answer:print router

Correct Answer:print router

Question 7

1 out of 1 points

What computer (or standalone device) receives print jobs from clients and sends them to print devices that are either locally attached or connected to the network?Answer

Selected Answer:print server

Correct Answer:print server

Question 8

1 out of 1 points

What standardized, highly portable print job format is the default format used by the Windows 2000, Windows XP, and Windows Server 2003 print subsystems?Answer

Selected Answer:Enhanced Metafile (EMF)

Correct Answer:Enhanced Metafile (EMF)

Question 9

1 out of 1 points

What is a disadvantage of letting each print client function as its own print server?Answer

Selected Answer: Administrators cannot implement advanced printing features.

 10.To share printers, which Network Sharing and Discovery setting must be turned on?

Correct Answer: Administrators cannot implement advanced printing features.

 10.To share printers, which Network Sharing and Discovery setting must be turned on?

Question 10

1 out of 1 points

Compared with NTFS permissions, printer permissions are __________.Answer

Selected Answer:simpler

Correct Answer:simpler

Question 11

1 out of 1 points

Which document management menu command causes the print server to stop sending jobs to the print device until you resume it by selecting the same menu item again?Answer

Selected Answer:Printer > Pause Printing

Correct Answer:Printer > Pause Printing

Question 12

1 out of 1 points

Which document management menu command enables users to send jobs to the printer, where they remain in the queue, unprocessed, until you select the same menu item again?Answer

Selected Answer:Printer > Use Printer Offline

Correct Answer:Printer > Use Printer Offline

Question 13

1 out of 1 points

To set printer priorities, you must do all of the following except __________.Answer

Selected Answer:create multiple print users

Correct Answer:create multiple print users

Question 14

1 out of 1 points

What is the only role service that is required when you add the Print Services role?Answer

Selected Answer:Print Server

Correct Answer:Print Server

Question 15

1 out of 1 points

Which of the following is not an option with the Print Services Management Console?Answer

Selected Answer:Installing a printer

Correct Answer:Installing a printer

Question 16

1 out of 1 points

Which of the following is not a node found in the Print Management console?Answer

Selected Answer:sharing and security

Correct Answer:sharing and security

Question 17

1 out of 1 points

Which version of Windows automatically supports automatic policy-based printer deployments by de-fault?Answer

Selected Answer:None of the above

Correct Answer:None of the above

Question 18

1 out of 1 points

The XML Paper Specification format is included with which of the following operating systems by de-fault?Answer

Selected Answer:Windows Vista

Correct Answer:Windows Vista

Question 19

1 out of 1 points

With network-attached print devices, what is the primary deployment decision that the administrator must make?Answer

Selected Answer:which computer will function as the print server

Correct Answer:which computer will function as the print server

Question 20

1 out of 1 points

Just as with folder shares, what must clients have to access a shared printer?Answer

Selected Answer:proper permissions

Correct Answer:proper permissions

Question 21

1 out of 1 points

Printer permissions, which are much simpler than NTFS permissions, basically dictate whether __________.Answer

Selected Answer:all of the above

Correct Answer:all of the above

Question 22

1 out of 1 points

By default, the Print Management console displays only which of the following in its list of print serv-ers?Answer

Selected Answer:local machine

Correct Answer:local machine

Question 23

1 out of 1 points

What is one of the major problems for printing administrators on large enterprise networks?Answer

Selected Answer:keeping track of print devices

Correct Answer:keeping track of print devices

Question 24

1 out of 1 points

How many possibilities of filter combinations exist in the Print Management Console?Answer

Selected Answer:more than 1,000

Correct Answer:more than 1,000

Question 25

10 out of 10 points

Match description to terminology.Answer

QuestionCorrect Match

Selected Match

     With __________-attached print devices, the primary deployment decision that the administrator must make is to decide which computer will function as the print server.

J.network

 J.network

You can connect a single print server to multiple print devices, creating what is called a printer __________.

A.printer pool

 A.printer pool

By default, all printers assign the Allow Print permission to the __________ special identity.

H.Everyone

 H.Everyone

Users with the Allow __________ Printers permission can go beyond just manipulating queued documents; they can reconfigure the printer itself.

I.Manage

 I.Manage

The values of the __________ spin box do not have any absolute significance; they are pertinent only in relation to each other.

C.Priority

 C.Priority

In the Print Management Console, if you right-click the filter in the __________ pane and select Show Extended View from the context menu, an additional pane appears containing the contents of the selected printer’s queue.

E.  scope

 E.  scope

Listing printers in the __________ Directory database enables users and administrators to search for printers by name, location, or model (as long as you populate the Location and Model fields in the printer object).

D.Active

 D.Active

To use Active Directory to deploy printers to clients, you must configure the appropriate policies in a Group __________ Object.

G.Policy

 G.Policy

Clicking Add Required Role Services causes the wizard to select the exact role services within Web Server (IIS) role that the __________ Printing service needs.

F.Internet

 F.Internet

The simplest form of print architecture consists of one print device connected to one computer, also known as a(n) __________ attached print device.

B.locally

 B.locally

Question 26

10 out of 10 points

Match the description to the terminology.

Answer

Question Correct Match Selected Match

     What device driver converts the print jobs generated by applications into an appropriate string of commands for a specific print device?

D.

print driver

 D.

print driver

What allows clients to print via HTTP traffic, either over an intranet or via the World Wide Web?

B. Internet Printing Protocol

 B. Internet Printing Protocol

What can distribute large numbers of incoming jobs among several identical print devices to provide more timely service and fault tolerance?

A.

printer pool

 A.

printer pool

What printer permissions allow a user to share a printer?

H.

Manage Printers

 H.

Manage Printers

What snap-in for MMC is an administrative tool that consolidates the controls for the printing components throughout the enterprise into a single console?

G.

Print Management

 G.

Print Management

To create a printer object in the Active Directory database, right-click a printer in the Print Management console and select what from the context menu?

E.

List in Directory

 E.

List in Directory

What is a new, platform-independent document format included with Windows Server 2008 and Windows Vista in which print job files use a single XPS format for their entire journey to the print device rather than being converted first to EMS and then later to PCL?

C.XPS

 C.XPS

What is the simplest form of print architecture, consisting of one print device connected to one computer?

F.

locally attached print device

 F.

locally attached print device