WINCH INFORMATION TO DIN 15020 PART 1 - Prolift Lifting … · winch information winch drive...

28

WINCH INFORMATION

WINCH DRIVE GROUP/DUTY CLASSTO DIN 15020 PART 1

CALCULATING FLEET ANGLEMinimum distance from drum to first sheave or load connection - metres

SLOPE & GRADE RESISTANCE

Minimum distance from drum to first sheave or load connection - metres

If the duration of an operating cycle is 12 minutes or longer, the rope may be graded one drive group lower than the drive group grading determined from the running time category and from the load collective.

18

15

12

9

6

3

0 129 254 380 508 635 767

Smooth drum1.5 degrees

Grooved drum3 degrees

SLOPE

(Percent per 100 Horizontal m)

GRADE RESISTANCE

(kg pull per ton to overcome

grade resistance)

1 9

2 18

3 27

4 36

5 45

6 54

7 63

8 73

9 82

10 90

11 99

12 108

13 117

14 126

15 134

16 143

17 151

18 160

19 169

20 178

25 220

30 260

35 299

40 337

45 372

50 406

55 437

60 464

65 492

70 519

75 543

80 565

85 587

90 607

95 624

100 638

RUNNING TIME CATEGORY

LIGHT MEDIUM HEAVY

(running time per day in hours, related to

one year)

Max load occurs only infrequently.

Low, average. max load occurs

with roughly equal frequency.

Max load occurs almost continuously.

V006 up to 0.125 1Em 1Em 1Dm

V012 over 0.125 - up to 0.25

1Em 1Dm 1Cm

V025 over 0.25 - up to 0.5

1Dm 1Cm 1Bm

V05 over 0.5 - up to 1 1Cm 1Bm 1Am

V1 over 1 - up to 2 1Bm 1Am 2m

V2 over 2 - up to 4 1Am 2m 3m

V3 over 4 - up to 8 2m 3m 4m

V4 over 8 - up to 15 3m 4m 5m

V5 over 15 4m 5m 5m

29

HAND WINCH TYPE HA-AG

Lifting capacity 45 kg or 100 kg for wall mounting

• Hand operated winches designed for light duty application raising blinds, shutters, clothes lines and chandeliers

• Not recommended for industrial application

• Aluminium die-cast construction, corrosion resistant parts and powder coated paint finish

• Self locking brake

• Quiet running with low crank effort, removable crank and low weight

Product code HA-AG45 HA-AG100

Lifting capacity 1st layer (kg) 45 100

Rope diameter (mm) 2 3

Rope capacity total (m) 12 8

Ratio 1:1 3:1

Lift per crank turn (mm) 96 38

Required effort (kg) 8 6

Weight (kg) 1 2.1

45 kg 100 kg

30

HAND WINCH TYPE HA-SW

Product code HA-SW80 HA-SW125


Lifting capacity last layer (kg) 47 60


Rope capacity 1st layer (m) 2.1 1.5


Number of layers 6 6

Ratio 1:1 1:1

Drum width (mm) 60 83



Duty class to DIN 15020 1Em 1Em

Weight (kg) 2.5 2.5

Capacity (kg) 80 125

A 142 142

B 150 250

C 105 144

D 85 126

Eø 40 40

F 100 100

G 150 150

H 180 180

J 70 70

Kø 9 9

125 kg Stainless Steel Winch is also available

Lifting capacity 80 kg - 125 kg for wall mounting

• Wall mounted spur gear winch with fixed crank

• Compact unobtrusive hand winches

• Pressed steel with zinc plating, corrossion resistant

• Easy, safe operation

• Rope outlet in any direction

• With automatic Siku type brake - self sustaining

• Stainless Steel version available - 125 kg

DIMENSIONS (mm)

31

HAND WINCH TYPE HD-SG

63 or 125 kg

Lifting capacity 63 - 250 kg for wall mounting

• Wall mounted spur gear winch with removable crank

• Solid aluminium housing

• Silent, enclosed load pressure brake with automatic adjustment

• Winch handle removable under load

• Rope outlet in any direction

• Complies with BS EN 13157

Product code HD-SG63 HD-SG125 HD-SG250

Lifting capacity 1st layer (kg) 63 125 250

Lifting capacity last layer (kg) 63 125 140

Rope diameter (mm) 3 3 4

Rope capacity 1st layer (m) 2 2 1.4

Rope capacity total (m) 20 20 15

Number of layers 6 6 6

Ratio 1:1 1:1 2.75:1

Lift per crank turn (mm) 135 135 57

Required effort (kg) 10 12 16

Weight (kg) 3 3 5

DIMENSIONS (mm)

Capacity (kg) 63 125 250

A 130 130 178

A1 110 110 134

B 243 270 270

B1 116 116 143

B2 90 90 90

B3 14 14 12

B4 51.5 51.5 81

C 130 130 247

C1 110 110 221

C2 55 55 53

C3 150 250 250

D 8.5 8.5 10.5

Drum Ø 40 40 46

Drum width 50 50 44

250 kg

32

HAND WINCH TYPE HA-SG

Product code HA-SG300 HA-SG500 HA-SG750 HA-SG1000 HA-SG2000 HA-SG3000

Lifting capacity 1st layer (kg) 300 500 750 1000 2000 3000

Lifting capacity last layer (kg) 203 330 580 750 1700 2500

Rope diameter (mm) 6 6.5 8 9 12 13

Rope capacity 1st layer (m) 2.7 2.1 3.7 3 3.6 2.9

Rope capacity total (m) 11 10 12 10 8 7

Number of layers 4 4 4 4 2 2

Ratio 3.2:1 7.4:1 12.25:1 18.37:1 25.7:1 42.8:1

Lift per crank turn (mm) 74 30 28 19 16 10

Required effort N 190 210 200 180 320 300

Weight (kg) 10 10 14 15 23 32

A (mm) 209 209 263.2 263.2 271.5 348.5

B (mm) 170 170 250 250 180 220

C (mm) 200 200 290 290 220 260

D (mm) 270 270 250 250 280 380

E (mm) 300 300 290 290 330 442.5

F (mm) 96 96 125 125 250 255

G (mm) 130 130 130 130 250 250

H (mm) 70 70 102 102 120 120

I (mm) 250 250 250 250 300 300

J (mm) 63 63 90 90 126 126

K (mm) 89 89 145.7 145.7 161.5 223.5

L (mm) 270 270 299 299 550 550

Lifting capacity 300 kg to 3000 kg for wall mounting • Wall mounted spur gear winch

• Robust spur gear hand winches with a high degree of safety

• With automaic SIKU type brake, self sustaining with folding handle

• Maintenance free bearings, corrosion resistant

• Painted finish as standard, orange

• Zinc plated finish available on capacities 300kg, 500kg, 750kg and 1000kg

• Suitable for manual ground support truss systems


DIMENSIONS (mm)

33

HAND WINCH TYPE HA-SGS

Lifting capacity 250 kg or 500 kg

• Wall mounted spur gear winch with removable crank handle

• Removable crank and handle fits either front or back faces - this avoids unintentional operation – useful in non secure areas like schools etc.

• Easily installed on flat surfaces - unobtrusive

• Internal automatic load brake, high security with a slack rope inhibiter

• Quiet in operation

• Painted finish as standard, orange

• Suitable for manual ground support truss systems


Product code HA-SGS250 HA-SGS500



Rope diameter (mm) 5 6.5




Ratio 5.06:1 9.2:1


Required effort daN 120 140


Weight (kg) 12 12

34

HAND WINCH TYPE HA-WV, HA-KV

Lifting capacity 300 kg or 500 kg

• Compact, modern, braked winch - for wall mounting (WV), base or wall mounting (KV)

• Innovative winch with large rope capacity

• Corrosion resistant zinc plated with fully enclosed gears and brake encased in plastic cover

• Self locking internal brake with proven security concept

• Lightweight and compact

• Folding Crank


• Available in 2 versions – wall mounting (WV) or base mounting with mounting frame (KV)

• Stainless Steel version available see page 46Base or wall mounting (KV)

Wall mounting (WV)

Product code WV (wall mounting)

HA-WV300 HA-WV500

Product code KV (base orwall mounting)

HA-KV300 HA-KV500







Ratio 3.1:1 4.5:1




Weight (kg) 5 5


A 337 337

B 170 170

C 135 135

D 105 105

E1 200 200

F 83 83

F1 65 65

G 160 160

H 250 250

J 130 130

K 140 140

L 60 60

MØ 11 11

NØ 13 13

DIMENSIONS (mm)

35

Product code GO-4 AFDPS GO-6 AFDPS GO-8 AFDPS GO-12 AFDPS

Lifting capacity - 1st layer (kg) 340 500 650 800

Lifting capacity - last layer (kg) 120 200 250 300

Webbing size (mm) 50 50 50 50

Drum capacity (m) 4.6 6 8 8

HAND WINCH TYPE GO-AFD

Lifting capacity 190 kg - 1994 kg

• General purpose braked winch for base or column mounting

• Large rope capacity

• Corrosion resistant zinc plated with fully enclosed gears and brake encased in plastic cover


• Lightweight and compact

• Stamped gears with gear protection

• Folding crank


• Stainless Steel version available see page 45

• supplied for webbing or wire rope

WIRE ROPE WINCHES

WEBBING WINCHES

Product code GO-4AFMD GO-4AFD GO-6AFD GO-8AFD GO-12AFD GO-20AFD GO-30AFD

Lifting capacity 1st layer (kg) 190 340 500 650 900 1180 1994

Lifting capacity last layer (kg) 80 190 240 270 490 650 1419

Rope diameter (mm) 3 4 5 6 7 8 9

Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76 2.0 3.6

Rope capacity total (m) 8 12 14 19 13 10 13

Drum diameter (mm) 27 40 45 54 63 76 80

Number of rope layers 8 4 5 7 5 4 2

Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1 9.71:1 21.85/1

Lift per crank turn (1st layer) (mm) 37 54 45 39 23 25 13

Required effort (kg) 15 24 24 23 25 19 24

Minimum load for brake function (kg) 10 10 10 10 10 10 50

Rolling load capacity on a 30% incline (kg) 350 500 750 850 1500 2500 3664

Weight (kg) 2.2 2.7 3.7 5.5 7.4 7.8 13.7

36

HAND WINCH TYPE GO-AFD

10x10 ø11 ø11

37

37

120

70 19

12

41

200.5

ø10.5

164 22HandleGO-12/20 AF/AFI

76.5 ø13 ø13

64

64

47

4730

171

20 210

270,5

8535

ø13Handle

GO-30 AF

Handle

R4,5

R4,5

31.5125

61 14.5

21.5

8.95

ø9

21.5

90.5R4,5

116

GO-4 AF/AFI

R4,5 Handle

ø9

16

156131.5

10.5 6

125

50

R4,5

GO-4 AFM

R5,5R6,25

37

11

11

178

39.5 25.5 14.5

ø11 32

32

100.5

GO-8 AF/AFI

Handle115

ø11

29

15540 26 14

ø11

32

32

67

10

10

GO-6 AF/AFI

Product code

GO-4AFM GO-4AF GO-4AFI GO-6AF GO-6AFI GO-8AF GO-8AFI GO-12AF GO-12AFI GO-12AFL GO-20AF GO-30AF

A 211 250 245 265 265 265 270 294 294 294 294 365

B 50 90.5 88.5 99 99 100 100 119.5 119.5 119.5 119.5 170

C 78 117 117 132 132 132 130 155 155 155 155 225

E 100 100 96 100 100 100 100 100 100 100 100 100

F 126 128 128 161 165 200 200 214 214 214 214 300

G 96 96 96 128 130 167 167 170 170 170 170 180

H 195 197 202 240 232 290 290 295 295 295 330 345

I 27 27 27 27 27 27 27 28 28 28 28 4

L - - - - - - - - - 40 - -

M 80 80 80 117 117 140 140 140 140 140 140 170

N 31 31 31 58 58 81 81 81 81 81 81 98

O 68 68 58 68 58 68 58 68 68 68 68 130

P 92 92 92 92 92 92 92 92 92 92 92 162

DIMENSIONS (mm)

Base Dimensions

37

HAND WINCH TYPE HA-KWV

Lifting capacity from 300kg to 1250kgModern base or column mounted winch ideal for heavy duty applications

• Column or base mounting

• Lightweight

• High efficiency through spur gearing

• Smooth running

• All components are zinc plated and corrosion resistant

• Automatic load pressure brake prevents unintentional lowering of the load

• Enclosed solid gears

• Complies with BS EN13157

• Also available as a stainless steel unit

Product code HA-KWV300 HA-KWV650 HA-KWV1250



Wire rope diameter (mm) 4 6 8

Wire rope capacity 1st layer (m) 2.5 2.4 1.9

Wire rope capacity total (m) 22 23 28.5


Drum diameter (mm) 36 70 75


Required effort (N) 270 240 240

Weight (kg) 4 9 16

1250 kg

650 kg

Stainless Steel Version

300 kg

38

HAND WINCH TYPE HA-KWV

DIMENSIONS (mm)

39

HAND WINCH TYPE F-QW

Lifting capacity 100 kg – 1700 kg

• General purpose column or base mounted winch, large drum capacity

• A range of spur gear winches suitable for lifting, lowering and pulling applications

• Safe and reliable double tipped brake pawl

• Especially suited for vehicle winch or trailer applications

• The QW winch will freewheel when unloaded; this feature can be removed if required

• Painted finish

Product code F-QW100 F-QW250 F-QW400 F-QW750 F-QW1100 F-QW1700

Lifting capacity 1st layer (kg) 100 250 400 750 1100 1700

Lifting capacity last layer (kg) 51 141 245 452 733 1291

Rope diameter (mm) 4 5 6 8 10 12

Rope capacity 1st layer (m) 4 5 5 5 6 7

Rope capacity total (m) 40 40 30 30 30 20

Number of layers 7 6 5 5 4 3

Ratio 1:1 2.88:1 4.33:1 12.2:1 22.2:1 28.8:1

Lift per crank turn (mm) 163 71 55 25 17 16.5

Required effort (kg) 11.5 9 11 10 10 15

Duty class to DIN 15020 1Em 1Em 1Em 1Em 1Em 1Em

Weight (kg) 7 12 13 19 26 46

DIMENSIONS (mm)

Capacity (kg) 100 250 400 750 1100 1700

A 276.5 362.5 362.5 403.5 448 509

B 117 150 150 155 195 205

C 80 100 100 80 155 155

D 11 15 15 18 18 18

E 48 60.5 70 89.1 110 139

F 110 125 140 175 190 230

G 240 350 350 350 350 350

H 150 150 150 150 150 150

I 160 220 245 266 300 362

J 147 174 182 214 231 296

K 35 45 57.5 48 65 96

L 90 130 130 170 170 170

M 35 45 57.5 48 65 93

40

HAND WINCH TYPE GOLIATH GO-CS


• Worm geared, wall or base mounted winch for short movement

• Compact, inexpensive self sustaining lifting winches for loads up to 300 kg

• Base or wall mounting

• Self locking worm gear and protective cover for greater safety

• Quiet in operation; no brake ratchets

• Ideal for regular short moving strokes

• Meets the requirements of BS EN 13157

Options:

• Quick attaching handle

Product code GO-CS100 GO-CS200 GO-CS300 GO-CS100PS

Winch type Wire Rope Wire Rope Wire Rope Webbing

Lifting capacity 1st layer (kg) 100 200 300 170


Rope diameter (mm) 3 3 or 4 4 -

Rope capacity total (m) 9 4 or 2 2 -

Capacity- webbing, 1mm thick, 20mm wide (m) - - - 4.0

Drum diameter (mm) 27 27 27 27

Numbers of rope layers 8 2 or 4 2 or 4

Gear ratio 7:1 14:1 14:1 7:1

Lift per crank turn (mm) 13 7 7 13

Required effort (kg) 6 6 6 6

Minimum load for brake function (Kg) 10 10 10 10

Weight (kg) 1.8 1.8 1.8 1.8

CS 100 CS 100PS Webbing CS 300

Wall mounting

Base mounting

41

HAND WINCH TYPE G-WG

DIMENSIONS (mm)

Worm geared general purpose winch

• Robust and safe lifting winch

• Square worm-wormwheel transmission with maintenance free bearings

• Adjustable crank, with ergonomic plastic grip

• Easy to grease worm gearbox

• Load pressure brake with double ratchet system

• Painted or zinc-plated finish

• Optional conversion bracket, CB250, 500 or 1000, to match mounting holes of the previous WG-series

• Grooved drum as option

• 2 cable compartments multi compartment possible upon request

• In compliance with DIN 15020

Options:

• As standard RAL 7044 (Silk grey) or Zinc plated (optional)

Product code WG250 WG500 WG1000 WG1500 WG2000 WG3000 WG5000

Lifting capacity - 1st cable layer (kg) 250 500 1000 1500 2000 3000 5000

Lifting capacity - last cable layer (kg) 95 239 542 845 1129 1861 3165

Required effort (kg) 6 10 13 21 9/18 12/24 25/50

Lift per crank turn, 1st layer (mm) 17 20 13 9 11/21 8/16 9/18

Rope capacity 1st layer (m) 3.1 4.4 5.2 5.4 5 5.6 5.3

Rope capacity total (m) 67 67 58 50 48 42 42

Rope diameter (mm) 5 6 9 10 13 16 20

Weight (kg) 13 16 29 28 60 78 115

Type A B C D G H J K L M N O P R S

WG250 238 145 100 192 106 102 48 14 160 191 15 354 280 171 130

WG500 269 160 115 223 107 131 70 14 190 221 15 384 325 192 130

WG1000 302 195 141 254 110 160 102 14 240 266 15 429 350 264 130

WG1500 302 250 178 254 111 160 102 14 240 278 15 441 350 306 130

WG2000 410 295 196 360 137 180 133 25 312 208 249 740 380 419 250

WG3000 436 256 251 386 137 205 165 25 376 260 308 825 380 550 250

WG5000 436 421 316 386 138 200 219 25 437 298 335 865 380 613 250

42

ADDITIONAL PNEUMATIC DRIVE FOR G-WG WINCHES

• Robust air motor

• Easy to operate joystick

• One-hand operation possible

• Suitable to use with the following winches manufactured from august 2006: G-WG1500, G-WG2000, G-WG3000, G-WG4000, G-WG5000, Pneumatic drive can be used with winches manufactured pre August 2006 with a small alteration ( please ask for details)

• Variable hoisting speed - adjustable via hand joystick.

Product code WG-PND

Air pressure Max 6 bar

Free speed ca.65 rpm

Speed at max. power (100 Nm) ca.35 rpm

Air consumption at max power 0,93 m3/m

Dimension L x H x B 395 x 150 x 115 mm

Weight 5kg

43

CONVERSION BRACKET FOR NEW STYLE G-WG250-500-1000

• Conversion plate converts the new style winch to old style WG fixing centres

Bracket Mounting holes dimension CxD (mm) WG-winch including conversion bracket

CB250 82 x 261

CB500 106 x 281

CB1000 141 x 316

HAND WINCH TYPE G-WG OPTIONS

Standard winch

Grooved drum option

Electro - Zinc Plated Split drum option

44

HAND WINCH TYPE K-WB

Lifting capacity 250 kg to 750 kg for wall mounting

• Worm gear winch used for heavy duty and theatrical applications

• Worm gear operation in an oil bath to guarantee smooth operation – popular for theatrical applications

• Enclosed cast iron construction

• Adjustable crank radius for speedy cranking

• Self locking automatic brake ensures load is held securely

• Hardened worm shaft gives long life


Options:

• Grease lubrication allows different mounting positions

• Grooved drums

• Multi compartment drums

Product code WB250 WB500 WB750



Rope diameter (mm) 5 6 8

Rope capacity 1st layer (m) 4.8 7.9 9.2

Rope capacity total (m) 11.3 29.1 49


Ratio 16:1 16:1 25:1


Required effort (kg) 9.2 14.5 16

Weight (kg) 12.5 21 42

A 205 250 330

B 137 190 243

C 120 150 205

D 85 100 125

F 219 282 350

G 94 138 182

Hø 96 125 150

J 313 479 573

K 108 238 238

L 96 112 160

M 79 101 146

N 295 440 440

O 12 14 20

P 234 290 390

DIMENSIONS (mm)

45

HAND WINCH TYPE GO-AFID (STAINLESS STEEL)


• General purpose brake winch for base or column mounting in Stainless steel

• Column or base mounting

• Stainless steel 316L material

• Lightweight- inexpensive

• Smooth running, high efficiency with spur gearing

• Automatic load pressure brake prevents the unintentional lowering of the load

• Stamped gears- with gear protection


• For wire ropes or webbing

Dimensions see page 36

Product code GO-4AFMID GO-4AFID GO-6AFID GO-8AFID GO-12AFID

Lifting capacity 1st layer (kg) 190 340 500 650 900

Lifting capacity last layer (kg) 80 180 240 270 490

Rope diameter (mm) 3 4 5 6 7

Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76

Rope capacity total (m) 8 12 14 19 13

Drum diameter (mm) 27 36 45 54 63

Numbers of rope layers 8 4 5 7 5

Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1

Lift per crank turn (mm) 37 54 45 39 23

Required effort (kg) 15 24 24 23 25

Minimum load for the brake function (kg) 10 10 10 10 10

Weight (kg) 2.2 2.8 4.4 5.2 7.6

46

HAND WINCH TYPE HA-WE/HA-KE - STAINLESS STEEL

Lifting capacity 300 kg or 500 kg for wall mounting (WE), base or wall mounting (KE)

• Compact, moderm wall or base mounted winches in stainless steel, large rope capacity

• Corrosion resistant stainless steel with gears protected by plastic casing



• Lightweight and compact shape, folding crank, fully enclosed gears and brake


• Available in 2 versions – wall mounting (WE) or base mounting (KE) with mounting bracket

Base mounting (KE)

Wall mounting (WE)

Product code KE (base or wall mounting)

HA-KE300 HA-KE500

Product code WE (wall mounting)

HA-WE300 HA-WE500







Ratio 3.1:1 4.5:1




Weight (kg) 5 5


A 337 337

B 170 170

C 135 135

D 105 105

E1 200 200

F 83 83

F1 65 65

G 160 160

H 250 250

J 130 130

K 140 140

L 60 60

MØ 11 11

NØ 13 13

DIMENSIONS (mm)

47

Stainless steel manual winch made from 304 Grade stainless steel for harsh environment applications, especially in areas with aggressive conditions ,e.g. chemical and food industry, clarification plants, waste disposal, transport and marine applications.

• Space saving internal self actuating load brake

• Lifelong lubrication


• High efficiency

• Detachable safety crank

• Superior quality

• Proven security concept

Product code HA-ED 500 HA-ED 750

Capacity: 1st rope layer 500 kg 750 kg

Capacity: Last rope layer (4th layer)

350 kg 445 kg

Lift per crank turn 37 mm 30 mm

Effort on crank 170 N 180 N

Rope capacity 25 m 26 m

Rope diameter ø 6 mm ø 6 m

Weight 10 kg 10 kg

HAND ROPE WINCH HA-ED 2S

Stainless steel manual winch made from 304 Grade stainless steel for harsh environment applications, especially in areas with aggressive conditions ,e.g. chemical and food industry, clarification plants, special refuse disposal, transport and marine applications.

• Space saving internal self actuating load brake

• High and low speed gears

• Free wheel

• Lifelong lubrication


• High efficiency

• Detachable safety crank

• Superior quality

Product code HA-ED 2S

Capacity: 1st rope position 500 kg

4th rope position 335 kg

Crank force low gear 170 N

Lift/crank turn: low gear 37 mm

Lift/crank turn: fast gear 280 mm

Rope diameter (mm) ø 6 mm

Weight 11 kg

HAND ROPE WINCH HA-ED 500 - 700HA-ED 500 - 700

48

HAND WINCH TYPE G-TL

Lifting capacity 150 kg for wall mounting – Designed to raise and lower basketball nets • Casing made of blow resistant black ABS plastic material

• Robust and safe with no protruding parts

• Equipped with an internal load reaction friction brake and removable safety crank to avoid unintentional operation

• Painted internal components

Product code G-TL150

Lifting capacity 1st layer (kg) 150

Lifting capacity last layer (kg) 75

Rope diameter (mm) 4

Rope capacity 1st layer (m) 1.7

Rope capacity total (m) 10

Number of layers 5

Ratio 1:1

Lift per crank turn (mm) 125

Required effort (kg) 8

Weight (kg) 6

DIMENSIONS (mm)

49

HAND WINCH TYPE HA-WM

Lifting capacity 250 kg - 500 kg for wall mounting • Low cost worm gear winch

• Designed for lowering spare wheels on trucks

• A robust, inexpensive, easily operated winch with various mounting possibilities

• Self locking worm gear drive and proven security concept

• Available as standard with a fixed handle; other options available

• Suitable for outside use

• Suitable for wire or fibre rope

Product code HA-WM250 HA-WM400 HA-WM500



Rope diameter (mm) 4 6 6.5

Rope capacity 1st layer (m) 1.6 1.9 4.6

Rope capacity total (m) 3.3 4 14


Ratio 25:1 25:1 25:1

Lift per crank turn (mm) 5.8 7.5 13

Required effort (kg) 6.6 18 14

Duty class to DIN 15020 1Em 1Em 1Em

Weight (kg) 4.1 6 12

250 kg

400 kg

500 kg

DIMENSIONS (mm)

50

HAND WINCH TYPE HA-LW

Lashing capacity up to 2000 kg • Lashing winch with removable gearbox

• Consists of a winch unit and a detachable gearbox with crank for lashing of strapping or wire rope The gearbox has a ratio of 25:1 and when connected to the winch unit winds 7.5mm per turn of crank

• Easy to use, the winch units are permanently mounted and the self locking detachable gear box is mounted when a movement is required

Product code gearbox HA-LWGEAR

Product code winch HA-LWDRUM

Lashing capacity 1st layer (kg) 2000

Rope diameter (mm) 8

Rope capacity total (m) 9

Strap dimensions (mm) 50x5

Strap capacity (m) 3

Ratio 25:1

Lift per crank turn without gearbox (mm) 180

Lift per crank turn with Gearbox (mm) 7.5

Required effort (kg) 18

Weight of winch (kg) 6.1

Weight of gearbox (kg) 3.2

Winch Unit

Gearbox Unit

WINCH INFORMATION TO DIN 15020 PART 1 - Prolift Lifting … · winch information winch drive...

Documents

Transcript of WINCH INFORMATION TO DIN 15020 PART 1 - Prolift Lifting … · winch information winch drive...