WIN2000 SMALL FLANGE + flowcurves
2
Options 1. Closing device 2. S cr een 3. Threaded connection, only for aluminium pipes. 4. Powder (epoxy) coating 5. Sounding pipe 6. Small flange connection (DN50-DN125) 7. Vacuum Breaker 8. Anti splash water type (Type 1B, DN50-DN125, recommended for fueltanks) Table 1: WIN2000 Air Pipe Head DN50-DN125 dimensions DN50 (2”) DN65 (2 ½”) DN80 (3”) DN100 (4”) DN125 (5”) A Ø108 Ø130 Ø160 Ø195 Ø235 B ±2.5 161 200 226 265 320 C Overflow 136 168 190 226 262 D Small flange connection: see Table 2 below Ball diameter Ø60 Ø75 Ø90 Ø105 Ø130 Weight kg. 2 2.75 3.75 6 8.5 Flow rate at 0,25 bar(m3/h)* 23 34 57 102 128 Flow rate at 0,25 bar(m3/h) ** 19 33 52 78 116 Max inlet air 11 95 10 8 95 The original The world’s largest producer of seawater resistant aluminium air pipe heads Innovative and high quality products WIN2000 Air pipe heads with small flange connection A C o v e r f l o w B
description
WIN2000 SMALL FLANGE + flowcurves_Winteb
Transcript of WIN2000 SMALL FLANGE + flowcurves
-
5/24/2018 WIN2000 SMALL FLANGE + flowcurves
1/2
Options
1. Closing device
2. Screen
3. Threaded connection, only for aluminium
pipes.
4. Powder (epoxy) coating
5. Sounding pipe
6. Small flange connection (DN50-DN125)
7. Vacuum Breaker8. Anti splash water type (Type 1B,
DN50-DN125, recommended for fuel tanks)
Table 1: WIN2000 Air Pipe Head DN50-DN125 dimensions
DN50
(2)
DN65
(2 )
DN80
(3)
DN100
(4)
DN125
(5)
A 108 130 160 195 235
B 2.5 161 200 226 265 320
C Overflow 136 168 190 226 262
D Small flange connection: see Table 2 below
Ball diameter 60 75 90 105 130
Weight kg. 2 2.75 3.75 6 8.5
Flow rate at 0,25
bar(m3/h)*
23 34 57 102 128
Flow rate at 0,25
bar(m3/h) **
19 33 52 78 116
Max inlet air 11 9 5 10 8 9 5
The original
The worlds largest producer of seawater resistant aluminium air pipe heads
Innovative and high quality products
WIN2000 Air pipe heads with small flange connection
A
Coverflow
B
-
5/24/2018 WIN2000 SMALL FLANGE + flowcurves
2/2
Max inlet air 11 9 5 10 8 9 5
Pressure
drop
in
kPa
Pressure
dro
in
kPa
WIN2000 type 1 without screen size DN450
Pressure
dro
in
kPa
Pressure
drop
ink
Pa
WIN2000 type 1 without screen sizes DN50-250
WIN2000 type 1 with screen mesh18 sizes DN50-250 WIN2000
type 1-B with screen mesh18 sizes DN50-125
WIN2000 type 1 without screen sizes DN300-400
WIN2000 type 1 with screen mesh18 sizes DN300-400
WIN2000 type 1 with screen mesh30 sizes DN300-400
WIN2000 Air Pipe Heads: Pressure drop vs. Flow rate Characteristics
According to classification societies the air pipe head characteristic curves
are to be taken into consideration at the design stage of the ballast system.
Flowrate in m3/h
The original
