Wilson Tool - Amada Thick Turret catalogue 2011 - SM TECH
-
Upload
sm-tech-srl -
Category
Documents
-
view
486 -
download
13
description
Transcript of Wilson Tool - Amada Thick Turret catalogue 2011 - SM TECH
WILSON TOOLREPLACEMENT
AMADATOOLING
A Cost EffectiveSolution for LongLasting Durability
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 2
Terms and Conditions
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Credit All orders are subject to the approval of our credit department. If you are a new account, pleasefurnish us with a bank reference and three supplier references. A credit limit will be imposed on newaccounts until credit has been established.
Payment Terms are net 30 days.
Cancellation In the event an order is cancelled, charge will be made to cover labour, materials and overheads.
Returned Material A handling charge of 25% is made on all standard parts returned for credit. Written permission andshipping instructions must be obtained before the return of any material. Special tooling cannot bereturned.
Claims All claims for shortages must be made within 3 days of the invoice date.
Prices Prices and specifications subject to change without prior notice. E & OE.All prices are exclusive of VAT.
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 3
Table of Contents
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
OptimaTM Coating 2UltimaTM Tool Steel 3Features and Benefits of Wilson Replacement Amada Tooling – Quick-Adjust A & B Stations 4Features and Benefits of Wilson Replacement Amada Tooling – C, D & E Stations 5Wilson Amada Style Quick Adjust A Station 6Wilson Amada Style A Station 7Wilson Amada Style Quick Adjust B Station 8Wilson Amada Style B Station 9Wilson Amada Style C Station 10Wilson Amada Style D Station 11Wilson Amada Style E Station 12Wilson Amada ABS Tooling 13Wilson Amada Style ABS Quick Adjust A Station 14Wilson Amada Style ABS A Station 15Wilson Amada Style ABS Quick Adjust B Station 16Wilson Amada Style ABS B Station 17Wilson Amada Style ABS C Station 18Wilson Amada Style ABS Quick Release C Station 19Wilson Amada Style ABS D Station 20Wilson Amada Style ABS Quick Release D Station 21Wilson Amada Style ABS E Station 22Wilson Amada Style ABS Quick Release E Station 23Close to Clamps Tooling 24DuraDie 25Replacement Insert Assembly 27Punch Shims, Die Shims & Slug Ejectors 28Non Standard Keying 29Shear Options 30Notes 31
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 1
2 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Optima Coating
The New Standard in Tooling Performance!
Optima™ is a proprietary TiCN (titanium carbo-nitride) coating that was custom engineered at our in-house coatingfacilities. It features unique properties that significantly enhance tooling performance. This coating, which is available only toWilson Tool customers, provides a level of surface hardness, wear resistance and lubricity never before associated withcoated or uncoated punch press tooling.
10,000,000
9,000,000
8,000,000
7,000,000
6,000,000
5,000,000
4,000,000
3,000,000
2,000,000
1,000,000
0
Numberofhits
Punch LifeNibbling 14ga. (1.9mm) 304 Stainless Steel
D2 M2TIN
Optima™
Using a 7.9mm Round Punch
The white area indicates actual results achievedthrough three tool sharpenings of 0.25mm each. Thecomplete graph indicates projected results with a
total of 6mm removed for sharpening.
Punch Life
51.61mm
45.16mm
38.7mm
32.25mm
25.8mm
19.35mm
12.9mm
6.45mm
0mm
Square mm of Material Adhesion(Galling) on Punch Tips
Nibbling 12ga. (2.1mm) Aluminium
D2 M2
TIN
Using a 6.3mm Square Punch (At 20,000 hits)
Material Adhesion
1,200,000
1,000,000
800,000
600,000
400,000
200,000
0
Numberofhits
Number of Hits Before First SharpeningNibbling 14ga. (1.9mm) 304 Stainless Steel
D2M2
TIN
Optima™
Using a 7.9mm Round Punch
Number of Hits
0.76mm
0.64mm
0.5mm
0.38mm
0.25mm
0.13mm
0mm
Punch Tip Corner WearNibbling 14ga. (1.9mm) 304 Stainless Steel
D2
M2
TIN
Using a 6.3mm Square Punch (At 25,000 hits)
Tip Wear
AmountofCornerWear
Some of the many benefitsthat you will enjoy with ourOptima™ coating include:
• Longer tool life
• Increased wear resistance
• More hits between sharpenings
• Reduced adhesion (galling)
• Reduced slug pulling
• Reduced corner breakdown
• Improved special tooling performance
• Lower overall tooling costs
• In-house coating facilities allow usto deliver faster and maintain totalquality control
TECHNOLOGY AT THE CUTTING EDGE
Technology for Increased Tool Life
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 2
3UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Boost Punching Productivity!
Tool Steel for Longer LifeWhen faced with demanding applications that requirelong-term wear resistance and toughness, turn to Wilson’snew Ultima™ Premium Tool Steel for HP thick turret tooling.Ultima punches and dies are engineered to increase wearresistance by up to 100% over conventional tool steels.
A New Level of PerformanceUltima premium tool steel sets a new benchmark fordurability and performance. Ultima punches and dies aredesigned to dramatically improve tool life when punchingabrasive materials and materials with high tensile strength.
Ultima excels in applications in which punches and dies wearquickly and is ideal for long running tasks. The premium steelfrom which Ultima punches and dies are made significantlyreduces micro chipping on the cutting edge. This microchipping is most often where cutting edge failure begins.
Remarkable Downtime ReductionsWith up to twice as long between re-grinds, Ultima premiumsteel significantly reduces downtime and tool replacement costs.Breaking, chipping, cracking, tool fatigue and other downtimeproblems are minimised, providing long term gains inproductivity and profitability.
Ultima tools are especially useful for the toughest punch pressapplications, but are effective in any job. Viability can bedetermined by conducting a cost benefit analysis.
Maintenance and sharpening may differ from traditionaltooling. Please check with your local Sales Engineer or theSalesdesk.
Ultima Tool Steel
Technology for Increased Tool Life
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 3
Features and Benefits of Wilson Replacement Amada Tooling
4 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
• •
•
•
•
Fast shim-free adjustmentwithout removal from the guide
Revitalise your existing tools.Give old tools a new lease oflife!
Available for A and B Stations
Extremely tough punch headsand canisters treated withNitrex coating for greater
strength, increased life andgreater wear resistance
Quick-Adjust A & B Stations
Increased grind life.Fully adjustable over 6.35mm to
maximise punch use
•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 4
Features and Benefits of Wilson Replacement Amada Tooling
5UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
••
•
Pre-loaded spring packassembly
Available for either ‘OldStyle®’ or Series 80®/90®
style punches
External keying for quickkey position changes
Built-in oiling systemensures thoroughinternal/external
lubrication
C, D & E Stations
Provides four timesmore grind life thantraditional old style
guide assemblies
•
Push button punchlength adjustment;
(eliminating the needfor shims)
Tapped for M-14T-handle carry and
extractor tool
Hardened steel guidefor longer life
Positive lockingstripper plate
retention
Optima™ coated keys forsuperior wear resistance
50.8mm (C) and 88.9mm(D) station guideassemblies are keyed at0°, 90° and 225°
Uses standard stripperplates
•
•
•
•
••
•
•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 5
Wilson Amada Style Quick Adjust A Station
6 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
URETHANE PLUG(2 Req’d) Cat. No. 13868
NYLON WIRECat. No. 24437
PUNCH HEADCat. No. 13395
• •••
12.7mm (A) Station Add Ons
Small Widths
0.79 - 1.0mm
Clearance< 0.10mm
Small Diameter
0.79 - 1.50mm
Clearance< 0.10mm
Punch
Punch
Stripper
N/C
Stripper
N/CN/C
Die
Die
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Description Cat. No. Price
Stubby Style (A) Station Add OnsNote: Must usestubby style dieand guide with
stubby style punch
Punch &GuideAssembly
Punch Die
Use Standard Punchand Die Price Plus:
Round(2.3mm max dia.) addShape add
Round addShape add
• Round 13425• Shape Fitted 13427• Optima® Add On –
Punches • Round 2183• Shape 2182• Optima® Add On –
Guides • Round 13065• Shape (0°) 13066• Shape (0° & 45°) 13067• Shape (0° & 90°) 13068
Stripper • Round 13044• Shape Fitted 13143
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
GUIDE(See below)
SPRINGCat. No. 24291
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 970476
PUNCH HEAD RETAINERCat. No. 13396
•
•
Up to 12.7mm ‘A‘ Dimension*
Standard Shapes & Key Locations (Die View)
• CANISTERCat. No. 13398
•
•SPRING PACK ASSEMBLYCat. No. 13394
RETAINING RINGCat. No. 24290
STRIPPER(See below)
•
•
•
Notes† Slug Hugger®dies must be ordered punch size plusclearance. Size restrictions apply. Slug Hugger 2available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN(3/16 x .312) Cat. No. 6013
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 6
Wilson Amada Style A Station
7UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
••
•
12.7mm (A) Station Add Ons
Small Widths
0.79 - 1.0mm
Clearance< 0.10mm
Small Diameter
0.79 - 1.50mm
Clearance< 0.10mm
Punch
Punch
Stripper
N/C
Stripper
N/C
N/C
Die
Die
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
URETHANE PLUGCat. No. 13868
SPRING SUPPORTCat. No. 13078
SOCKET HEAD CAP SCREWCat. No. 970476
Stubby Style (A) Station Add OnsNote: Must usestubby style dieand guide with
stubby style punch
Punch Die
Use Standard Punchand Die Price Plus:
Round(2.3mm max dia.) addShape add
Round addShape add
Up to 12.7mm ‘A‘ Dimension*
Standard Shapes & Key Locations (Die View)
•DOWEL PIN(3/16 x .312) Cat. No. 6013
STRIPPER(See below)
•
GUIDE(See below)•
Description Cat. No. Price
Punch &GuideAssembly
• Round 13057• Shape Fitted 13059• Optima® Add On –
Punches • Round 2183• Shape 2182• Optima® Add On –
Guides • Round 13065• Shape (0°) 13066• Shape (0° & 45°) 13067• Shape (0° & 90°) 13068
Stripper • Round 13044• Shape Fitted 13143
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
Notes† Slug Hugger®dies must be ordered punch size plusclearance. Size restrictions apply. Slug Hugger 2available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
SPRINGCat. No. 13079•
PUNCH HEAD ASSEMBLYCat. No. 13864•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 7
Wilson Amada Style Quick Adjust B Station
8 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Up to 31.75mm ‘A‘ Dimension*
URETHANE PLUG(2 Req’d) Cat. No. 13868
RETAINING RINGCat. No. 24294
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6333
•••
•
•
O-RINGCat. No. 24295
RETAINING RINGCat. No. 974202
SPRINGCat. No. 30
•
SPRING PACK ASSEMBLYCat. No. 13399
•SPRING SUPPORTCat. No. 13403
(B) Station Add Ons
Small Widths0.79 - 1.0mm
‘A’ Dimension*< 11.10mmClearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/C
StripperN/CN/C
Die
Die
N/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
DOWEL PIN(3/16 x .345) Cat. No. 6431
•
•
STRIPPER(See below)
•
•PUNCH HEADCat. No. 13400
Description Cat. No. PricePunch &GuideAssembly
• Round 13431• Shape Fitted 13433• Optima® Add On –
Punches • Round 2185• Shape 2184• Optima® Add On –
Guides • Round 13413• Shape (0°) 13414• Shape (0° & 45°) 13415• Shape (0° & 90°) 13416
Stripper • Round 1890• Shape Fitted 1917
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Shape (0° & 45°) Positive 2263• Shape (0° & 45°) Negative 2264• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
GUIDE(See below)
• PUNCH HEAD RETAINERCat. No. 13401
•
CANISTERCat. No. 13402•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 8
Wilson Amada Style B Station
9UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Up to 31.75mm ‘A‘ Dimension*
•SPRING SUPPORT ASSEMBLY
Cat. No. 13078
(B) Station Add Ons
Small Widths0.79 - 1.0mm
‘A’ Dimension*< 11.10mmClearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/C
StripperN/CN/C
Die
Die
N/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
•
DOWEL PIN(3/16 x .345) Cat. No. 6431
Description Cat. No. PricePunch &GuideAssembly
• Round 13090• Shape Fitted 13092• Optima® Add On –
Punches • Round 2185• Shape 2184• Optima® Add On –
Guides • Round 13413• Shape (0°) 13414• Shape (0° & 45°) 13415• Shape (0° & 90°) 13416
Stripper • Round 1890• Shape Fitted 1917
Dies • Round Slug Hugger®† 2194• Round Standard®† 2021• Shape Slug Hugger 2195• Shape Standard 13804• Shape (0° & 45°) Positive 2263• Shape (0° & 45°) Negative 2264• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
STRIPPER(See below)
•
GUIDE(See below)•
PUNCH HEAD ASSEMBLYCat. No. 13866
•SPRING COVERCat. No. 2732•
SPRINGCat. No. 35122
•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 9
10 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DRIVER ASSEMBLYCat. No. 5729
DRIVERCat. No. 5736
SOCKET HEAD CAP SCREW(M3 x 12mm) Cat. No. 6326
RETAINING RINGCat. No. 5746
DISC SPRING(12 Req’d) Cat. No. 5744
ADJUSTMENT PUSH BUTTONCat. No. 10539
ADJUSTMENT LOCKING BALLCat. No. 972420
PUNCH HOLDERCat. No. 5556
DISC SPRING(2 Req’d) Cat. No. 971690 LOCK WASHER
(2 Req’d) Cat. No. 2112URETHANE
(3/32 Sq. x 27/64) (Pkg of 50)Cat. No. 6116
SOCKET HEAD CAP SCREW(M12 x 40mm) Cat. No. 6605
GUIDECat. No. 5420
ADJUSTMENT SHAFTCat. No. 5735
WAVE SPRINGCat. No. 971692
Maximum Material Thickness 6.35mm
50.8mm (C) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 29.21mm29.22 - 31.72
Clearance< 0.10mm
Small Diameter< 25.4mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/C
DieN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
All punches will be shipped with no shear unless specified.
†Slug Hugger®dies must be ordered punch size plus clearance. Size restrictions apply.Slug Hugger 2 available on request. Contact Sales Desk for further information.
* ‘A’ Dimension = longest distance across shape.
• Standard 5583• Standard (LVD) 35191• Standard WLS® 5592• Standard WLS® (LVD) 35193
Punches • Round 1933• Shape 1934• Optima® Add On –
Strippers • Round 1848• Shape 1854
Dies • Round Slug Hugger®† 2196• Round Standard 1850• Shape Slug Hugger®† 2197• Shape Standard 13807• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
Up to 50.8mm ‘A‘ Dimension*
SOCKET HEAD CAP SCREW(2 Req’d) (Spl. M5 x .8 Cone Pt.)Cat. No. 5197
ANTI-LOCK SHIMCat. No. 5412
PUNCH HOLDER KEYCat. No. 5373
GUIDE STRIPPER RINGCat. No. 5035
LOCK WASHERCat. No. 6327
•• •
•
•
••
•
•
••
•
••
•
•
• •
•
•
••
•
•
SPRING SUPPORTCat. No. 5008
SPRING COVERCat. No. 5693
•
SPECIAL SCREWCat. No. 429
•
Wilson Amada Style C StationSTRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 10
Wilson Amada Style D Station
11UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
88.9mm (D) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 48.26mm48.27 - 50.77mm
Clearance< 0.10mm
Small Diameter48.26mm
48.27 - 50.77mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at0˚, 90˚ & 225˚.1.6mm Rooftop shear is given to all puncheswith 'A' dimension greater than 50.8mm, andwidth greater than 6.35mm, at no extracharge.All punches 6.35mm and under in width will beshipped with no shear unless specified.
† Slug Hugger® dies must be ordered punchsize plus clearance. Size restrictions apply. SlugHugger 2 available on request. Contact SalesDesk for further information.* ‘A’ Dimension = longest distance acrossshape.
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DISC SPRING(7 Req’d) Cat. No. 5449
SOCKET HEAD CAP SCREW(2 Req’d) (Spl. M5 x .8 Cone Pt.)Cat. No. 5197
LOCK WASHER(2 Req’d) Cat. No. 2112
PUNCH HOLDER KEYCat. No. 1862
LOCK WASHER(2 Req’d) Cat. No. 2112
WAVE SPRINGCat. No. 971692
SPRING DISC(2 Req’d) Cat. No. 971690
ANTI-LOCK SHIMCat. No. 5413 SPRING SUPPORT
Cat. No. 5738URETHANE
(3/32 Sq. x 27/64 (pkg of 50)Cat. No. 6116
SOCKET HEAD CAP SCREW(M12 x 50mm) Cat. No. 970467
GUIDECat. No. 5430
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFTCat. No. 5739
Maximum Material Thickness 6.35mm
DRIVER ASSEMBLYCat. No. 5730
ADJUSTMENT PUSH BUTTONCat. No. 5737
Up to 88.9mm ‘A‘ Dimension*
SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12mm)Cat. No. 6110GUIDE STRIPPER RINGCat. No. 5036
• Standard 5584• Standard (LVD) 35198• Standard WLS® 5593• Standard WLS® (LVD) 35200
Punches • Round 1937• Shape 1938• Optima® Add On –
Strippers • Round 1864• Shape 1869
Dies • Round Slug Hugger®† 2198• Round Standard 1865• Shape Slug Hugger®† 2199• Shape Standard 13810• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
PUNCH HOLDERCat. No. 5558
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5740
••
•
•
•
•
• •
••
•
• •
•
•
•
•
•
•
•
•
• •
•
SPRING COVERCat. No. 5423
•
•
SPECIAL SCREWCat. No. 429
STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 11
Wilson Amada Style E Station
12 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DRIVER ASSEMBLYCat. No. 5731
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5742
GUIDECat. No. 5438
SPRING SUPPORTCat. No. 5741
DISC SPRING(7 Req’d) Cat. No. 5449
ADJUSTMENT PUCH BUTTONCat. No. 5737
PUNCH HOLDERCat. No. 5560
ANTI-LOCK SHIMCat. No. 5413
PUNCH HOLDER KEYCat. No. 1862
URETHANE(3/32 Sq. x 27/64) (Pkg of 50)
Cat. No. 6116
DISC SPRING(2 Req’d) Cat. No. 971690
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFTCat. No. 5739
LOCK WASHER(2 Req’d) Cat. No. 2112
SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12mm)Cat. No. 6110
SOCKET HEAD CAP SCREW(M12 x 50mm) Cat. No. 970467
114.3mm (E) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 86.36mm86.37 - 88.87mm
Clearance< 0.10mm
Small Diameter< 86.36mm
86.37 - 88.87mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at0˚ & 90˚.1.6mm Rooftop shear is given to all puncheswith 'A' dimension greater than 50.8mm, andwidth greater than 6.35mm, at no extracharge.All punches 6.35mm and under in width willbe shipped with no shear unless specified.
† Slug Hugger®dies must be ordered punchsize plus clearance. Size restrictions apply. SlugHugger 2 available on request. Contact SalesDesk for further information.* ‘A’ Dimension = longest distance acrossshape.
• Standard 5585• Standard WLS® 5594
Punches • Round 1941• Shape 1942• Optima® Add On –
Strippers • Round 1877• Shape 1882
Dies • Round Slug Hugger®† 2200• Round Standard 1878• Shape Slug Hugger®† 2201• Shape Standard 13817• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
Up to 114.3mm ‘A‘ Dimension*
GUIDE STRIPPER RINGCat. No. 5037
SOCKET HEAD CAP SCREW(4 Req’d) (Spl M5 x 13.39mm Cone Pt.)
Cat. No. 5210
LIFTER PIN(4 Req’d) Cat. No. 5209
• •
•
•
••
•••
•
•
•• •
•
•
•
•
•
•
••
WAVE SPRINGCat. No. 971692
••
SPRING COVERCat. No. 5423
•
Maximum Material Thickness 6.35mm
SPECIAL SCREWCat. No. 429
•
STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 12
Wilson Amada ABS Tooling
13UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Punches, guides and strippers are fully compatible and interchangeable with Amada® original ABS tooling.
Wilson Amada® Style ABS Punches, Bolt-on Strippers and Punch Assembliesnow available from Wilson Tool.
Description Cat. No. Price
Bolt-on C StationStrippers • Round 13629
• Shape 13630D Station• Round 13631• Shape 13632E Station• Round 13633• Shape 13634
Bolt-on strippers are available for Amada® manufactureredholders only.
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 13
Wilson Amada Style ABS Quick Adjust A Station
14 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
Up to 12.7mm ‘A‘ Dimension*
12.7mm (A) Station Add Ons
Small Widths
0.79 - 1.0mm
Clearance< 0.10mm
Small Diameter
0.79 - 1.50mm
Clearance< 0.10mm
Punch
Punch
Stripper
N/C
Stripper
N/CN/C
Die
Die
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Description Cat. No. Price
Stubby Style (A) Station Add OnsNote: Must usestubby style dieand guide with
stubby style punch
Punch &GuideAssembly
Punch Die
Use Standard Punchand Die Price Plus:
Round(2.3mm max dia.) addShape add
Round addShape add
• Round 13823• Shape Fitted 13824• Optima® Add On -
Punches • Round 13827• Shape 13870• Optima® Add On -
Guides • Round 13073• Shape (0°) 13074• Shape (0° & 45°) 13075• Shape (0° & 90°) 13076
Stripper • Round 13045• Shape Fitted 13152
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
Standard Shapes & Key Locations (Die View)
STRIPPER(See below) •
SPRING PACK ASSEMBLYCat. No. 13394
•
GUIDE(See below)
•
URETHANE PLUG(2 Req’d) Cat. No. 13868 •
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 970476
•PUNCH HEADCat. No. 13395•
NYLON WIRECat. No. 24437
•
CANISTERCat. No. 13397
•
SPRING SUPPORTCat. No. 13398
•
SPRINGCat. No. 24291
•
PUNCH HEAD RETAINERCat. No. 13396•
RETAINING RINGCat. No. 24290 •
Notes† Slug Hugger®dies must be ordered punch size plusclearance. Size restrictions apply. Contact Sales Desk forfurther information (patented). Slug Hugger 2 availableon request.
* ‘A’ Dimension = longest distance across shape.
•DOWEL PIN(3/16 x .312) Cat. No. 6013
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 14
Wilson Amada Style ABS A Station
15UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
12.7mm (A) Station Add Ons
Small Widths
0.79 - 1.0mm
Clearance< 0.10mm
Small Diameter
0.79 - 1.50mm
Clearance< 0.10mm
Punch
Punch
Stripper
N/C
Stripper
N/CN/C
Die
Die
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Description Cat. No. Price
Stubby Style (A) Station Add OnsNote: Must usestubby style dieand guide with
stubby style punch
Punch &GuideAssembly
Punch Die
Use Standard Punchand Die Price Plus:
Round(2.3mm max dia.) addShape add
Round addShape add
• Round 13856• Shape Fitted 13858• Optima® Add On -
Punches • Round 13827• Shape 13870• Optima® Add On -
Guides • Round 13073• Shape (0°) 13074• Shape (0° & 45°) 13075• Shape (0° & 90°) 13076
Stripper • Round 13045• Shape Fitted 13152
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
Standard Shapes & Key Locations (Die View)
Up to 12.7mm ‘A‘ Dimension*
STRIPPER(See below) •
SPRINGCat. No. 13079
•
GUIDE(See below)
•
URETHANE PLUGCat. No. 13868 •
SOCKET HEAD CAP SCREWCat. No. 970476
•PUNCH HEAD ASSEMBLYCat. No. 13864•
SPRING SUPPORTCat. No. 13078
•
Notes† Slug Hugger®dies must be ordered punch size plusclearance. Size restrictions apply. Contact Sales Desk forfurther information (patented). Slug Hugger 2 availableon request.
* ‘A’ Dimension = longest distance across shape.
•DOWEL PIN(3/16 x .312) Cat. No. 6013
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 15
Wilson Amada Style ABS Quick Adjust B Station
16 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Description Cat. No. Price
Punch &GuideAssembly
• Round 13825• Shape Fitted 13826• Optima® Add On -
Punches • Round 13828• Shape 13872• Optima® Add On -
Guides • Round 13097• Shape (0°) 13098• Shape (0° & 45°) 13099• Shape (0° & 90°) 13100
Stripper • Round 2433• Shape Fitted 2432
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
Standard Shapes & Key Locations (Die View)
Up to 31.75mm ‘A‘ Dimension*
STRIPPER(See below)
•
SPRING PACK ASSEMBLYCat. No. 13399•
GUIDE(See below)•
URETHANE PLUG(2 Req’d) Cat. No. 13868 •
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6333
•
PUNCH HEADCat. No. 13400•
RETAINING RINGCat. No. 974202
•
CANISTERCat. No. 13402•
SPRING SUPPORTCat. No. 13403
•
SPRINGCat. No. 30
•
PUNCH HEAD RETAINERCat. No. 13401
•
RETAINING RINGCat. No. 24294
•
O-RINGCat. No. 24295
•
(B) Station Add Ons
Small Widths0.79 - 1.0mm
‘A’ Dimension*< 11.10mmClearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/C
StripperN/CN/C
Die
Die
N/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN(3/16 x .345) Cat. No. 6431
•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 16
Wilson Amada Style ABS B Station
17UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Description Cat. No. Price
Punch &GuideAssembly
• Round 13860• Shape Fitted 13862• Optima® Add On -
Punches • Round 13828• Shape 13872• Optima® Add On -
Guides • Round 13097• Shape (0°) 13098• Shape (0° & 45°) 13099• Shape (0° & 90°) 13100
Stripper • Round 2433• Shape Fitted 2432
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Ultima™ Add On (Round) -• Ultima™ Add On (Shape) -
Standard Shapes & Key Locations (Die View)
Up to 31.75mm ‘A‘ Dimension*
STRIPPER(See below)
•
SPRINGCat. No. 35122
•
GUIDE(See below)
•
PUNCH HEAD ASSEMBLYCat. No. 13866•
SPRING SUPPORT ASSEMBLYCat. No. 13078 •
SPRING COVERCat. No. 2732•
(B) Station Add Ons
Small Widths0.79 - 1.0mm
‘A’ Dimension*< 11.10mmClearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/C
StripperN/CN/C
Die
Die
N/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN(3/16 x .345) Cat. No. 6431
•
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 17
Wilson Amada Style ABS C Station
18 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
50.8mm (C) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension** < 29.21mm29.22 - 31.72
Clearance< 0.10mm
Small Diameter< 25.4mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/C
DieN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
All punches will be shipped with no shear unless specified.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictions apply.Slug Hugger 2 available on request. Contact Sales Desk for further information.
** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485for ABS (supplied and assembled).Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as analternative method to hold stripper.
* ‘A’ Dimension = longest distance across shape.
13084
Punches • Round 13614• Shape 13615• Optima® Add On –
Strippers • Round 5150• Shape 5151
Dies • Round Slug Hugger®† 2196• Round Standard 1850• Shape Slug Hugger®† 2197• Shape Standard 13807• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DRIVER ASSEMBLYCat. No. 5729
DRIVERCat. No. 5736
SOCKET HEAD CAP SCREWCat. No. 6326
RETAINING RINGCat. No. 972570
DISC SPRING(12 Req’d) Cat. No. 5744
ADJUSTMENT PUSH BUTTONCat. No. 10539
ADJUSTMENT LOCKING BALLCat. No. 972420
PUNCH HOLDERCat. No. 5556
DISC SPRING(2 Req’d) Cat. No. 971690
LOCK WASHER(2 Req’d) Cat. No. 2112
SPECIAL SOCKET HEAD CAP SCREWCat. No. 13843
GUIDE UNIT ASSEMBLYCat. No. 5420
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5735
WAVE SPRINGCat. No. 971692
Maximum Material Thickness 6.35mm
Up to 50.8mm ‘A‘ Dimension*
SPECIAL SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 5197
ANTI-LOCK SHIMCat. No. 5412
PUNCH HOLDER KEYCat. No. 5373
GUIDE STRIPPER RING**Cat. No. 5035
LOCK WASHERCat. No. 6327
•• •
•
•
••
•
•
••
•
••
•
•
•
•
•
••
•
•
SPRING SUPPORTCat. No. 5748
SPRING COVERCat. No. 5693
•
SPECIAL SCREWCat. No. 429
•
STRIPPER RETAINED WITH STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 18
Wilson Amada Style ABS Quick Release C Station
19UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
50.8mm (C) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 29.21mm29.22 - 31.72
Clearance< 0.10mm
Small Diameter< 25.4mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/C
DieN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
All punches will be shipped with no shear unless specified.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictions apply.Slug Hugger 2 available on request. Contact Sales Desk for further information.
††M12 bolt Cat No. 6605 included but not assembled.
* ‘A’ Dimension = longest distance across shape.
13829
Punches • Round 13614• Shape 13615• Optima® Add On –
Strippers • Round 5150• Shape 5151
Dies • Round Slug Hugger®† 2196• Round Standard 1850• Shape Slug Hugger®† 2197• Shape Standard 13807• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
Up to 50.8mm ‘A‘ Dimension*
DRIVER ASSEMBLYCat. No. 5724•
RETAINING RINGCat. No. 972441
•O-RINGCat. No. 972430
•
SPRINGCat. No. 972396
•ADJUSTMENT PUSH BUTTON
Cat. No. 10539
•
DRIVERCat. No. 5736
•
DISC SPRING(2 Req’d) Cat. No. 971690
•
ADJUSTMENT LOCKING BALLCat. No. 972420
•
ADJUSTMENT SHAFTCat. No. 5735
•
DISC SPRING(12 Req’d) Cat. No. 5744
•SPRING COVERCat. No. 5517
•
• SPRING SUPPORTCat. No. 5748
RETAINING RINGCat. No. 972570
•WAVE SPRINGCat. No. 971692
•
SPECIAL SOCKET HEAD CAP SCREW ††Cat. No. 13843
•
ANTI-LOCK SHIMCat. No. 5412
•
LOCK WASHERCat. No. 6327
•
SOCKET HEAD CAP SCREW(M3 x 12mm) Cat. No. 6326
•
PUNCH HOLDER KEYCat. No. 5373
•PUNCH HOLDER
Cat. No. 5556
•
SPECIAL SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 5197
•
LOCK WASHER(2 Req’d) Cat. No. 2112
•
GUIDECat. No. 5518
•
GUIDE STRIPPER RINGCat. No. 5520
•
Maximum Material Thickness 6.35mm
SPRING(5 Req’d) Cat. No. 971694
•
SPECIAL PIN(2 Req’d) Cat. No. 5522
•
LOCKING BUTTON(2 Req’d) Cat. No. 5518
•
SPRING(2 Req’d) Cat. No. 8155
•
•
STRIPPER CLIP(3 Req’d) Cat. No. 5521
WITH PUSH BUTTON STRIPPER RETENTION
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 19
Wilson Amada Style ABS D Station
20 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
All punches will be shipped with no shear unless specified.
†Slug Hugger®dies must be ordered punch size plus clearance. Size restrictions apply.Slug Hugger 2 available on request. Contact Sales Desk for further information.
** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485for ABS (supplied and assembled).Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as analternative method to hold strippers.
* ‘A’ Dimension = longest distance across shape.
13085
Punches • Round 13616• Shape 13617• Optima® Add On –
Strippers • Round 5152• Shape 5153
Dies • Round Slug Hugger®† 2198• Round Standard 1865• Shape Slug Hugger®† 2199• Shape Standard 13810• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DISC SPRING(7 Req’d) Cat. No. 5449
SPECIAL SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 5197
LOCK WASHER(2 Req’d) Cat. No. 2112
PUNCH HOLDER KEYCat. No. 1862
LOCK WASHER(2 Req’d) Cat. No. 2112
WAVE SPRINGCat. No. 971692
SPRING DISC(2 Req’d) Cat. No. 971690
ANTI-LOCK SHIMCat. No. 5413
SPRING SUPPORTCat. No. 5738
SPECIAL SOCKET HEAD CAP SCREWCat. No. 13844
GUIDE UNIT ASSEMBLYCat. No. 5430
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
DRIVER ASSEMBLYCat. No. 5730
ADJUSTMENT PUSH BUTTONCat. No. 5737
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6110GUIDE STRIPPER RING**Cat. No. 5036
PUNCH HOLDERCat. No. 5558
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5740
•
••
•
•
•
• •
••
•
• •
•
•
•
•
•
•
•
•
• •
•
SPRING COVERCat. No. 5423
•
•SPECIAL SCREWCat. No. 429
88.9mm (D) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension**< 48.26mm48.27 - 50.77mm
Clearance< 0.10mm
Small Diameter48.26mm
48.27 - 50.77mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Maximum Material Thickness 6.35mm
Up to 88.9mm ‘A‘ Dimension*
STRIPPER RETAINED WITH STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 20
Wilson Amada Style ABS Quick Release D Station
21UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Standard Shapes & Key Locations (Die View)
13830
Punches • Round 13616• Shape 13617• Optima® Add On –
Strippers • Round 5152• Shape 5153
Dies • Round Slug Hugger®† 2198• Round Standard 1865• Shape Slug Hugger®† 2199• Shape Standard 13810• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
88.9mm (D) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 48.26mm48.27 - 50.77mm
Clearance< 0.10mm
Small Diameter48.26mm
48.27 - 50.77mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
NotesStandard guide assys. are keyed for shapes at0˚, 90˚ & 225˚.1.6mm Rooftop shear is given to all puncheswith 'A' dimension greater than 50.8mm, andwidth greater than 6.35mm, at no extracharge.All punches 6.35mm and under in width will beshipped with no shear unless specified.
† Slug Hugger®dies must be ordered punchsize plus clearance. Size restrictions apply. SlugHugger 2 available on request. Contact SalesDesk for further information.
††M12 bolt Cat No. 970467 included butnot assembled.* ‘A’ Dimension = longest distance acrossshape.
Maximum Material Thickness 6.35mm
Up to 88.9mm ‘A‘ Dimension*
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DISC SPRING(7 Req’d) Cat. No. 5449
SOCKET HEAD CAP SCREW(2 Req’d) (Spl. M5 x .8 Cone Pt.)Cat. No. 5197
LOCK WASHER(2 Req’d) Cat. No. 2112
PUNCH HOLDER KEYCat. No. 1862
LOCK WASHER(2 Req’d) Cat. No. 2112
WAVE SPRINGCat. No. 971692
SPRING DISC(2 Req’d) Cat. No. 971690
ANTI-LOCK SHIMCat. No. 5413 SPRING SUPPORT
Cat. No. 5738
GUIDE UNIT ASSEMBLYCat. No. 5524
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
DRIVER ASSEMBLYCat. No. 5725
ADJUSTMENT PUSH BUTTONCat. No. 5737
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6110
GUIDE STRIPPER RINGCat. No. 5528
PUNCH HOLDERCat. No. 5558
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5740
•
••
•
•
•
• •
••
•
• •
•
•
•
•
•
•
•
•
• •
•
SPRING COVERCat. No. 5561
•
GUIDE ONLYCat. No. 5527
SPRING(6 Req’d) Cat. No. 971694
•
SPECIAL PIN(2 Req’d) Cat. No. 5522
•
LOCKING BUTTON(2 Req’d) Cat. No. 5519
•
SPRING(2 Req’d) Cat. No. 8155
•
•
STRIPPER CLIP(3 Req’d) Cat. No. 5521
SPECIAL SOCKET HEAD CAP SCREW ††Cat. No. 13844
WITH PUSH BUTTON STRIPPER RETENTION
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 21
Wilson Amada Style ABS E Station
22 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Notes
Standard Shapes & Key Locations (Die View)
Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
All punches will be shipped with no shear unless specified.
†Slug Hugger®dies must be ordered punch size plus clearance. Size restrictions apply.Slug Hugger 2 available on request. Contact Sales Desk for further information.
** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485for ABS (supplied with assembled).Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as analternative method to hold strippers.
* ‘A’ Dimension = longest distance across shape.
13088
Punches • Round 13618• Shape 13619• Optima® Add On -
Strippers • Round 5154• Shape 5155
Dies • Round Slug Hugger®† 2200• Round Standard 1878• Shape Slug Hugger®† 2201• Shape Standard 13817• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DRIVER ASSEMBLYCat. No. 5731
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5742
GUIDE UNIT ASSEMBLYCat. No. 5438
SPRING SUPPORTCat. No. 5741
DISC SPRING(7 Req’d) Cat. No. 5449
ADJUSTMENT PUSH BUTTONCat. No. 5737
PUNCH HOLDERCat. No. 5560
ANTI-LOCK SHIMCat. No. 5413
PUNCH HOLDER KEYCat. No. 1862
DISC SPRING(2 Req’d) Cat. No. 971690
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
LOCK WASHER(2 Req’d) Cat. No. 2112
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6110
SPECIAL SOCKET HEAD CAP SCREWCat. No. 13844
Up to 114.3mm ‘A‘ Dimension*
GUIDE STRIPPER RING**Cat. No. 5037
SPECIAL SOCKET HEAD CAP SCREW(4 Req’d) Cat. No. 5210
LIFTER PIN(4 Req’d) Cat. No. 5209
• •
•
•
••
•••
•
•
•• •
•
•
•
•
•
••
WAVE SPRINGCat. No. 971692
••
SPRING COVERCat. No. 5423
•
Maximum Material Thickness 6.35mm
SPECIAL SCREWCat. No. 429 •
114.3mm (E) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension**< 86.36mm86.37 - 88.87mm
Clearance< 0.10mm
Small Diameter< 86.36mm
86.37 - 88.87mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
STRIPPER RETAINED WITH STRIPPER CLIPS
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 22
Wilson Amada Style ABS Quick Release E Station
23UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Standard Shapes & Key Locations (Die View)
13831
Punches • Round 13618• Shape 13619• Optima® Add On -
Strippers • Round 5154• Shape 5155
Dies • Round Slug Hugger®† 2200• Round Standard 1878• Shape Slug Hugger®† 2201• Shape Standard 13817• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Description Cat. No. Price
GuideAssembly
114.3mm (E) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension*< 86.36mm86.37 - 88.87mm
Clearance< 0.10mm
Small Diameter< 86.36mm
86.37 - 88.87mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
NotesStandard guide assys. are keyed for shapes at0˚ & 90˚.1.6mm Rooftop shear is given to all puncheswith 'A' dimension greater than 50.8mm, andwidth greater than 6.35mm, at no extracharge.All punches 6.35mm and under in width willbe shipped with no shear unless specified.
† Slug Hugger®dies must be ordered punchsize plus clearance. Size restrictions apply. SlugHugger 2 available on request. Contact SalesDesk for further information.
††M12 bolt Cat No. 970467 included butnot assembled.* ‘A’ Dimension = longest distance acrossshape.
Up to 114.3mm ‘A‘ Dimension*
Maximum Material Thickness 6.35mm
O-RINGCat. No. 972430
RETAINING RINGCat. No. 972441
SPRINGCat. No. 972396
DRIVER ASSEMBLYCat. No. 5726
RETAINING RINGCat. No. 5747
DRIVERCat. No. 5742
GUIDE UNIT ASSEMBLYCat. No. 5534
SPRING SUPPORTCat. No. 5741
DISC SPRING(7 Req’d) Cat. No. 5449
ADJUSTMENT PUSH BUTTONCat. No. 5737
PUNCH HOLDERCat. No. 5560
ANTI-LOCK SHIMCat. No. 5413
PUNCH HOLDER KEYCat. No. 1862
DISC SPRING(2 Req’d) Cat. No. 971690
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
LOCK WASHER(2 Req’d) Cat. No. 2112
SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 6110
SPECIAL SOCKET HEAD CAP SCREW ††Cat. No. 13844
GUIDE STRIPPER RINGCat. No. 5538
SPECIAL SOCKET HEAD CAP SCREW(4 Req’d) Cat. No. 5210
LIFTER PIN(4 Req’d) Cat. No. 5209
• •
•
•
••
•••
•
•
•• •
•
•
•
•
•
•
••
SPRING COVERCat. No. 5561
•
WAVE SPRINGCat. No. 971692
•
GUIDE ONLYCat. No. 5537
SPRING(8 Req’d) Cat. No. 971694
•
SPECIAL PIN(2 Req’d) Cat. No. 5522
LOCKING BUTTON(2 Req’d) Cat. No. 5519
•
SPRING(2 Req’d) Cat. No. 8155
•
•
STRIPPER CLIP(4 Req’d) Cat. No. 5521
•
WITH PUSH BUTTON STRIPPER RETENTION
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 23
Close to Clamp Tooling
24 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
Dies
88.9mm (D) Station for punching close to clamps
• Slug Hugger®†(relief 2 sides, shp at 90˚)
• Slug Hugger®†(relief 2 sides, shpat 0˚-90˚)
• Slug Hugger®†(relief 1 side, shp at 90˚)
• Slug Hugger®†(relief 1 side, shpat0 -̊90 )̊
• Standard(relief 2 sides, shp at 90˚)
• Standard(relief 2 sides, shpat 0˚-90˚)
• Standard(relief 1 side, shp at 90˚)
• Standard(relief 1 side, shpat0 -̊90 )̊
5157
5330
2464
5333
13814
13813
13812
13811
Notes
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Contact Sales Desk for further information (patented).
* ‘A’ Dimension = longest distance across shape.
Description Cat. No. Price
Dies
114.3mm (E) Station for punching close to clamps
• Slug Hugger®†(relief 2 sides, shp at 90˚)
• Slug Hugger®†(relief 2 sides, shpat 0˚-90˚)
• Slug Hugger®†(relief 1 side, shp at 90˚)
• Slug Hugger®†(relief 1 side, shpat0 -̊90 )̊
• Standard(relief 2 sides, shp at 90˚)
• Standard(relief 2 sides, shpat 0˚-90˚)
• Standard(relief 1 side, shp at 90˚)
• Standard(relief 1 side, shpat0 -̊90 )̊
5159
5340
2467
5343
13821
13820
13819
13818
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 24
25UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Slitting, complex shapes, clusters and close to clamps –DuraDie is the perfect solution for all these jobs
Slitting SolutionThis is a special die holder assembly which provides youwith the ideal slitting solution. The die inserts are fullysupported by the die base and are hard wearing andeconomical to replace.
Problem SolvingThe DuraDie assembly is also the perfect solution whenyou are punching complex two dimensional shapes andcluster patterns with small webs between holes. In fact theDuraDie system can help whenever die strength is anissue.
Shock ResistantThe aperture (which closely follows the profile in the dieinsert), is cut into the shock resistant die holder which fullysupports the special die blade and the specially locatedshims.
DurableWith a die insert made using Ultima™, a specialpowdered tool steel, you will get more hits betweenregrinds and reduced downtime.
Practical & EconomicalThe complete assembly consists of a special die insert,a shim pack and a specially reinforced die holder. You canorder duplicate die inserts for different materials and ifyou need to replace a worn die all you need isa new insert.
DuraDie
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 25
DuraDie
26 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
Die Base Assembly (not including die blade) 12989
Die Blade (Slughugger) 12992
Shim Pack 12995
Knockout Tool 24310
50.8mm (C) Station Slitting
Maximum length * =51mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly (not including die blade) 13006
Die Blade (Slughugger) 13009
Shim Pack 13012
Knockout Tool 24310
88.9mm (D) Station Slitting
Maximum length * = 86mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly 0&90° (not including die blade) 13276
Die Blade – relieved on 1 side (Slughugger) 13280
Die Blade – relieved on 2 sides (Slughugger) 13282
Shim Pack 13012
Knockout Tool 24310
88.9mm (D) Station Close to Clamps
Maximum length * = 81mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly (not including die blade) 13015
Die Blade (Slughugger) 13014
Shim Pack 13017
Knockout Tool 24313
114.3mm (E) Station Slitting
Maximum length * = 111mm Maximum width * = 11mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly 0&90° (not including die blade) 13284
Die Blade – relieved on 1 side (Slughugger) 13288
Die Blade – relieved on 2 sides (Slughugger) 13290
Shim Pack 13017
Knockout Tool 24313
114.3mm (E) Station Close to Clamps
Maximum length * = 111mm Maximum width * = 11mm *Subject to certain restrictions
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 12990
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 13007
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERKEYED AT 0° & 90°Cat. No. 13276
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 13016
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERKEYED AT 0° & 90°Cat. No. 13284
Ø3 X 12 LG ROLL PINCat. No. 24233
••
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 26
Replacement Insert Assembly
27UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Notes* Optima® is standard on punch inserts.
* Blade insert punches under 9.53mm in width will be shipped with no shear unless specified.
* Double Valley Shear is recommended for widths of 4.75mm up to 9.53mm and minimum lengths of 50.8mm when used for nibbling.
* Undersized dimensions will incur additional charges. Please consult the fee schedule for the appropriate station to determine the charge.
* See shear chart on page 30.
* For widths less than 2.36mm, consult the sales desk.
* Maximum width 19mm.
* Inserts are available as obround to be used with rectangle dies, to eliminate ‘Saw Tooth Effect’.
50.8mm (C) 2623 2625 2590 2568 2624
88.9mm (D) 1966 2286 1967 1965 2372
114.3mm (E) 1969 2287 1970 1968 2373
Station Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceBody (1/2” - 13) Body (M - 12) Punch Insert
Replaceable Insert AssemblySet (1/2” - 13) Set (M - 12)
Socket Head Cap Screw – 3/8” - 16 x 1-1/2” long (for 50.8mm (C) station) 6391
Socket Head Cap Screw – 3/8” - 16 x 1-1/2” long (for 88.9mm (D) & 114.3mm (E) stations) 6019
High Collar Lock Washer for 3/8” screw 2129
Dowel Pin – 1/4” Dia. x 450” long (All stations) 6004
Parts Description Cat. No. Price
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 27
Punch Shims, Die Shims and Slug Ejectors
28 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Die ShimsStation Quantity Cat. No. Price
0.25mm Thick – Individually
12.7mm (A) 1 2101
31.75mm (B) 1 2097
50.8mm (C) 1 2089
88.9mm (D) 1 2081
114.3mm (E) 1 2073
0.25mm Thick – Package
12.7mm (A) 25 2208
31.75mm (B) 25 2209
50.8mm (C) 10 2210
88.9mm (D) 5 2211
114.3mm (E) 5 2212
0.75mm Thick – Individually
12.7mm (A) 1 2721
31.75mm (B) 1 2723
50.8mm (C) 1 2725
88.9mm (D) 1 2727
114.3mm (E) 1 2729
0.75mm Thick – Package
12.7mm (A) 25 2722
31.75mm (B) 25 2724
50.8mm (C) 10 2726
88.9mm (D) 5 2728
114.3mm (E) 5 2730
1.5mm Thick – Individually
12.7mm (A) 1 2104
31.75mm (B) 1 2100
50.8mm (C) 1 2092
88.9mm (D) 1 2084
114.3mm (E) 1 2076
1.5mm Thick – Package
12.7mm (A) 25 2172
31.75mm (B) 25 2173
50.8mm (C) 10 2174
88.9mm (D) 5 2175
114.3mm (E) 5 2176
Punch ShimsStation Quantity Cat. No. Price
Individually
12.7mm (A) 1 13080
31.75mm (B) 1 152
50.8mm (C) 1 2096
88.9mm (D) 1 2088
114.3mm (E) 1 2080
Package
31.75mm (B) 25 98
50.8mm (C) 10 2169
88.9mm (D) 5 2170
114.3mm (E) 5 2171
Slug EjectorsSquare Urethane
Hole Diameter in Punch Quantity Cat. No. Price
3.2mm 50 6116
4.8mm 50 6117
9.5mm 50 6118
12.7mm 50 6119
Assortment 50 6410
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 28
Non Standard Keying
29UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Standard Keying, plus extra pins or keys for shapes at 45° increments
Punches Dies
Available Options Add On Price
12.7mm (A) Not available Not available Not available Not available per key
31.75mm (B)0° & 45° 0° & 45° per key
0° & 180° 0° & 180° per key
50.8mm (C) 45° Increments per pin 45° Increments per key Not applicable
88.9mm (D) 45° Increments per pin 45° Increments per key Not applicable
114.3mm (E) 45° Increments per pin 45° Increments per key Not applicable
Available Options Add On Price
Front of Machine
This key location matches Amada’s®
turret punch press programming method.
Die View
Front of Machine
Wilson Tool’s keying diagram.
Example
Shape at 23˚
When ordering shapes at non-standard angles, use the diagrams below to eliminate any confusion.
Die View
Station Guides or Strippers
Shape at single angles other than standard(Note: No additional charge on A & B Stations
for shape at 45° increments)
Station Punches Dies Guides or Strippers
12.7mm (A) No Charge No Charge
31.75mm (B) Not Applicable
50.8mm (C) Not Applicable
88.9mm (D) Not Applicable
114.3mm (E) Not Applicable
Standard Keying, plus extra pins or keysfor shapes at other than 45° increments
Station Punches Dies Guides or Strippers
12.7mm (A) Not Available Not Available per key
31.75mm (B) Not Available Not Available per key
50.8mm (C) per pin per key Not Applicable
88.9mm (D) per pin per key Not Applicable
114.3mm (E) per pin per key Not Applicable
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 29
Shear Options
30 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
% x Material Thickness=Total Clearance
Type of Shear Benefit Limitation
Rooftop
Concave or DoubleConcave
Inverted Rooftop
Double Valley Shear
JK Shear
Best shear for punchingat maximum tonnages.
Best shear for nibblingbecause it inverts stresses.
Also good shear for nibblingbecause it inverts stresses.
Best shear for nibbling whenshape is long and narrow.
A special punch tip shear thatallows you to punch highstrength materials with areduced risk of breakage.
When nibbling, bite must be 75% ofpunch dimension or excessive sideloading will result.
The punch is less resistant to breakagewhen punching at high tonnagesbecause of inverted stresses.
More susceptible to breakage becauseof a sharp focal point for stresses –use with great care.
The punch is less resistant to breakagewhen punching at high tonnagesbecause of inverted stresses.
Can only be used on punches up to25.4mm diameter or 'A' dimension*.
Special Shears
Station
Inverted Rooftop Double Valley
Single Concave Double Concave
1.6mm Shear 3.2mm Shear 1.6mm Shear 3.2mm Shear
31.75mm (B) Within 31.75mm N/A N/A
50.8mm (C) Within 50.8mm
88.9mm (D) Within 88.9mm
114.3mm (E) Within114.3mm
‘A’ Dimensions*
JK ShearShape
Round
Rectangle, Square, Hexagon
Single ‘D’, Double ‘D’
Obround
NotesIf specified: 3.2mm maximum rooftop shear can be given at N/C for any round or shape in 50.8mm (C), 88.9mm (D) or 114.3mm (E).For rooftop shear on any round or shape in 12.7mm (A) or 31.75mm (B) stations, add•1.6mm rooftop shear is given to all punches with 'A' dimension* greater than 50.8mm and width greater than 6.35mm at no extra charge. All punches 6.35mmand under in width will be shipped with no shear unless specified.*'A' Dimension = longest distance across shape.**NOTE: In some instances, inverted rooftop is substituted for single and double concave shears.
Add on Price
Die Clearance Selection Information% Total Clearance
Material Minimum Best Maximum
Copper, 1/2 Hard 8 12 16
Brass, 1/2 Hard 6 11 16
Mild Steel 10 15 20
Steel 0.50C 12 18 24
Aluminium, Soft 5 10 15
Stainless Steel 15 20 25
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 30
Notes
31UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 31
Notes
32 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 32
Notes
33UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:53 Page 33
United KingdomEuropean HeadquartersStirling Road, South MarstonIndustrial Estate, Swindon, WiltshireSN3 4TQ, United KingdomTel (Free): 0800 373748Tel: +44 (0)1793 831818Fax (Free): 0800 373758Fax: +44 (0)1793 831945email: [email protected]
FranceBat B, 51 Rue d’Ourdy,77550 Réau, FranceTel: (Gratuit) 0800 10 29 00Tel: +33 (0)1 64 13 47 80Fax: (Gratuit) 0800 10 40 14Fax: +33 (0)1 64 13 47 81email: [email protected]
GermanyGottlieb Daimler Str 231552 Rodenberg, GermanyTel: (Frei) 00800 945 766 8665Tel: +49 (0)5723 747 0Fax: (Frei) 00800 945 766 329Fax: +49 (0)5723 747 10email: [email protected]
ScandinaviaEjby Industrivej 40DK-2600 Glostrup, DenmarkTel (Free): 80 20 20 24Tel: +45 44 53 16 99Fax (Free): 80 20 20 26Fax: +45 44 53 06 07email: [email protected]
email: [email protected]
Visit us online at: www.wilsontool.com
United StatesWorldwide Headquarters12912 Farnham AvenueWhite Bear Lake, MN 55110 USATel (Free): 800 328 9646Tel: (651) 426 9133Fax (Free): 800 222 0002Fax: (651) 426 9134email: [email protected]
ArgentinaWilson Tool International(r), ArgentinaVon Wernicke 3041 PBSan Isidro, 1642 Buenos AiresArgentinaTel: +54 114 7634004Fax: +54 114 5084190email: [email protected]
ChinaNo. 6 Building of 584018 Lane Huaning RoadXinhuang Industry Park201108 Shanghai, ChinaTel: +86 21 51089638Fax: +86 21 64422195email: [email protected]
MexicoThe Wilson Company SRL de CVBLVD. Diaz Ordaz no 140 piso 20Col. Santa MariaMonterrey, Nuevo LeonMexicoC.P. 64650Tel: 52 (81) 8865 4820Fax: 52 (81) 8865 4599
South AfricaWilson Tool South Africa LimitedRynhurst Business Park156 Pretoria Road, RynfieldBenoni, 1501, GautengRepublic of South AfricaTel: +27 877 217 875Fax: 086 657 8629email: [email protected]
WILSON TOOL INTERNATIONAL (EUROPE) LTD
Wilson Tool International Ltd - April 2011
Amada_Thick Turret_2011 (no prices):Amada_Thick Turret 12/5/11 13:52 Page 1
www.wilsontool.ro
Distribuitor:
S.C. SM TECH SRL
Tehnologii şi soluţii pentru industria prelucrării tablelor
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494
E-mail: office (at) sm-tech.ro Web:
www.sm-tech.ro www.wilsontool.ro
Vă stăm la dispoziţie cu plăcere cu orice informaţie sau ofertă pentru scule
Wilson Tool destinate maşinii d-voastră de ştantat CNC sau presei d-voastră abkant