WicoLine Concrete WLC - ITW constructions · 18 LINE WICO Installation using Spit TAPCON® Dome...
Transcript of WicoLine Concrete WLC - ITW constructions · 18 LINE WICO Installation using Spit TAPCON® Dome...
13www.itwconstruction.ee
LINEWICO
WicoLine Concrete WLCConcrete support mount for windows and doors
Attach the window mounts to the wall.
Attach the push and pull fittings to the window. Place the window on the mounts and attach the push and pull fittings to the wall.
The window can be mounted before or after the exterior insulation is securely attached or a new exterior wall is built.
Concrete
14 www.itwconstruction.ee
LINEWICO
WicoLine Concrete WLCConcrete support mount for windows and doors
Areas of application Benefits— For external attachment of windows and doors in
wall structures
— For use in concrete
— By exterior façade renovation in new construction
— Time-saving installation, only one part
— Flexible building process, since the mounts can be fitted from the inside without the use of scaffolding
— Long durability due to pre-galvanised high-grade steel with 20 μm
— Minimal thermal bridge due to continuous insulation around the window
— Flexible system in different dimensions depending on the thickness of the insulating material
— High wear capacity equal to 80 kg per mount/0.8 kN per mount
— Spit TAPCON® Dome 6.0 × 60
Choice of attachment
Con
cret
e
Concrete WLC mount fitting
Type length
15www.itwconstruction.ee
LINEWICO
Scale drawing
TypeDimension
L × H × W × t [mm]
DimensionsF
[mm]
Number of holes Ø5
[mm]
Number of holes Ø8.5
[mm]
Weight[g]
Number of units in
cardboard box
Number of cardboard boxes
per palletDB no. ITW no.
WLC 85 85 × 49 × 51 × 2 12 2 1 185 20 21 1869730 210955
WLC 110 110 × 60 × 51 × 2 15 2 1 250 20 21 1869731 210956
WLC 120 120 × 65 × 51 × 2 15 2 1 284 20 21 1869732 210957
WLC 130 130 × 70 × 51 × 2 20 2 1 319 20 21 1869733 210958
WLC 145 145 × 77 × 51 × 2 20 2 1 353 20 21 1869734 210959
WLC 155 155 × 83 × 51 × 2 30 2 1 387 20 21 1869735 210960
WLC 170 170 × 90 × 51 × 2 30 2 1 431 20 21 1869736 210961
WLC 180 180 × 95 × 51 × 2 30 2 1 475 20 21 1869737 210962
WLC 190 190 × 100 × 51 × 2 30 2 1 515 20 21 1869738 210963
WLC 215 215 × 112 × 51 × 2 30 2 1 626 20 21 1869739 210964
WLC 240 240 × 125 × 51 × 2 30 2 1 737 20 21 1869740 210965
WLC 280 280 × 145 × 51 × 2 30 2 1 932 10 21 1869741 210966
WLC 300 300 × 155 × 51 × 2 30 2 1 1042 10 21 1869742 910967
WLC 330 330 × 170 × 51 × 2 30 2 1 1219 10 21 1869743 210968
10
L + 65
L 65
2
14
5
F
H
51
22
.5
13
24
20 Ø8.5
8
Dimensions: Length: 85-330 mm Height: 49-170 mmMaterials: S250GD + Z275MA According to: EN10346Surface treatment: Hot galvanised approx.
20 μmApplication class: 1-2
Specification and product rangeConcrete support mount for windows and doors
Concrete
16 www.itwconstruction.ee
LINEWICO
Con
cret
e
WicoLine push WLSPush fittings for absorbing horizontal compression forces
WicoLine pull WLTPull mount for absorbing horizontal tensile forces
Min. 2 brackets per standard window. The mounts are installed at a 45-degree angle in opposite direction at top and bottom
Min. 4 mounts per standard window with 2 mounts per side
Max. 90 cm between mounts
Areas of application
BenefitsBenefits
Wall attachmentWall attachment
Attachment to windows or doorsAttachment to windows or doors
Areas of application
See page 25-26 for line drawings and additional information about push and pull mounts.
Paslode screw 5.0 × 35
Spit frame anchor screw FS-H 7.5 × 62
Paslode screw 5.0 × 35
Spit frame anchor screw FS-H 7.5 × 62
— For bracing of windows and doors
— For installation alongside windows
— For bracing of windows and doors
— For installation at top and bottom of windows
— Spit frame anchor screw FS-H 7.5 × 62 — Spit frame anchor screw FS-H 7.5 × 62
— Paslode screw 5.0 × 35 or shorter — Paslode screw 5.0 × 35 or shorter
— Long durability due to pre-galvanised high-grade steel with 20 μm
— High strength due to angle bracket
— Minimal thermal bridge due to continuous insulation around the window
— Flexible system in different dimensions depending on the thickness of the insulating material
— Long durability due to pre-galvanised high-grade steel with 20 μm
— Minimal thermal bridge due to continuous insulation around the window
— Flexible system in different dimensions depending on the thickness of the insulating material
17www.itwconstruction.ee
LINEWICO
Dimensioning
Minimum insulation thickness
WicoLine Concrete WLC Mount
WicoLine Push WLS Mount
WicoLine Pull WLT Mount
Recommended mounting
105 210955 WLC 85 210980 WLS 170 210970 WLT 232
Spit Tapcon®Dome 6.0 × 60
130 210956 WLC 110 210981 WLS 190 210971 WLT 260
140 210957 WLC 120 210981 WLS 190 210971 WLT 260
150 210958 WLC 130 210982 WLS 200 210972 WLT 275
165 210959 WLC 145 210983 WLS 215 210973 WLT 296
175 210960 WLC 155 210984 WLS 225 210974 WLT 310
190 210961 WLC 170 210985 WLS 240 210975 WLT 331
200 210962 WLC 180 210986 WLS 250 210976 WLT 345
210 210963 WLC 190 210986 WLS 250 210976 WLT 345
235 210964 WLC 215 210987 WLS 290 210977 WLT 400
260 210965 WLC 240 210987 WLS 290 210977 WLT 400
300 210966 WLC 280 210988 WLS 350 210978 WLT 487
320 210967 WLC 300 210989 WLS 370 210978 WLT 487
350 210968 WLC 330 210989 WLS 370 210978 WLT 487
There must be at least 20 mm insulation measured from the tip of the mount to the outer insulation due to corrosion and thermal bridge.
WLC is used, where the inner wall is at least concrete C20.
The maximum load on WicoLine Concrete Mount is approximately 80 kg or 0.8 kN.
Recommended dimensions
Concrete
Concrete WLC mount fitting
Min. 20 mm
18 www.itwconstruction.ee
LINEWICO
Installation using Spit TAPCON® Dome
Min. 60 mm6 mm drill bit
60 mmTX 30
Tightening max. 10 Nm
Pre-drilling with 6 mm drill bit.
Tighten with TX 30 to a maximum of 10 Nm.
Blow 3 times to remove the last particles.
It is possible to use any other Spit TAPCON® concrete screws with a diameter of 6.0 mm and length of at least 60 mm.
DB no. ITW no. DimensionsQuantity
per package
1850592 058784 6.0 × 60/25 - 3 mm 100
Installation of WLC
Con
cret
e
ITW Construction Products OÜ Türi 10D • 11314 Tallinn • Estonia T +372 651 2462 • F +372 651 2463 www.itwconstruction.ee