Technical features

Single-bock machine

structure

Single-bock machine

structure

Technical features

HSK-B80 tool holders: why?

• High quality

• Maximum rigidity

• Absolute precision

Technical features

HSK tooling system is being held by both the inside expansion mechanism (the orange section being pushed past the green section along with the draw bar) as well as the outside surfaces, which are in gray. The shank is straight, therefore the position of the tool holder into the spindle will always be the same.

Tool holder

HSK-B80 tool holders: why?

Technical features

HSK tool holders are only $40 more to buy than the equivalent “V” taper tool because of the added strength and rigidity.

HSK-B80 tool holders: why?

Technical features

Comparison with HSK-A63: the HSK B-80 tool holders used by Breton are 20% larger !!

More then 20% capacity in the conveyance of torque.

HSK-B80 tool holders: why?

Technical featuresLaser tool measuring

• Centesimal measurement of tool profile, diameter and height.

• Software for the perfectalignement of tools composingthe same profile.

• Less and homogeneous wearingof tools.

• Quality control of the tools.

• Better finishing of the surfaces.

Technical features4th axis and aggregate to cut

• 18 Hp electrospindle

• 10” diameter blade

Technical featuresSiemens CNC servomotorsfor controlling axis interpolation and travel.

Siemens CNC servomotorsfor controlling axis interpolation and travel.

Technical features

15" touch screenmonitor.15" touch screenmonitor.

Technical features

Siemens brushless motorswith digital encoders.Siemens brushless motorswith digital encoders.