why suzuki liana flop?
-
Upload
maher-manan -
Category
Technology
-
view
1.176 -
download
5
Transcript of why suzuki liana flop?
Project Reborn
Flop Product is Suzuki Liana
Manufacturing Problems
1-Engine cutting out intermittently Problem with the engine cutting out intermittently? If so, the usual cause of this issue is a faulty crank angle sensor. You will most likely have the engine management warning light appear on the dashboard as well.
2-Erratic engine idling
If you are having problems with the engine idling very erratically, then it is usually due to a fault with the idle speed sensor. When this part fails, the rpm needle jumps up and down, instead of remaining at a constant speed. You may also find that the engine is cutting out, after idling like this for a short while.
3-Alternator failure
The alternator on the Liana is known for failing. If this part fails, then you will have a problem starting the car, with the cars electrics and problems charging its battery.
4-Gearbox problems There can be several different problems with the gearbox, ranging from minor issues, to complete gearbox failure. One of the main problems on the Liana is with the gear selection. This problem was caused by poor design of the gear change cable retaining clip. This issue was subject to a recall.
5-
Solutions You will need to replace the crank angle sensor, in order to fix
the problem. We can help you to find a replacement crank angle sensor, at a very low price.
You will need to fit a replacement idle speed sensor, to resolve the issue.
You will need to fit a replacement alternator, in order to sort out the issue.
As mentioned above, the gear changing issue was subject to a recall. Suzuki should fix this problem, free of charge and change the faulty gear change cable, retaining clip. If you need a replacement gearbox, then we can help you to find one at amazingly low prices.
After eliminating all problems and issues we have to promote it again with new tv commercial and attractive adds that effect in costomer,s mind